Impingement/Radiant Split
Job
Item No.
Impingement/Radiant Split-Belt
Conveyor Toaster
IRCS4
FEATURES
• Patent pending impinged air toaster utilizes dual five (5) inch
IRCS4
DESCRIPTION
The IRCS4 toaster is designed for toasting a variety of bread and
bakery goods, as well as having the ability to function as a broiler,
cheesemelter, and booster. It uses both radiant and impingement
heating providing quick and accurate results. The dual conveyor
belt drive utilizes a stepper motor driven system. The speed and
heating are electronically controlled and can be independently
adjusted as well as programmed to the user’s needs.
SPECIFICATIONS
The IRCS4 impingement/radiant split-belt conveyor toaster will
be constructed in the U.S.A with a corrosion-resistant stainless
steel body. Units are supplied with high-contrast color display,
power saver mode, high limit switch, variable speed control, and
independent heat control for the top, bottom, left, and right. This
unit will use patent pending dual impingement and radiant heat.
The toaster will be capable of toasting up to 16 pieces per minute.
The power shall be rated at 4.68 kW, available in either a 208 volt
or a 240 volt version, and will be single phase. The unit will have
a factory attached L6-30P plug and 6-foot cord.
WARRANTY
These units come with a one (1) year warranty for parts and labor.
STAR MANUFACTURING INTERNATIONAL INC.
10 Sunnen Drive • Saint Louis, Missouri 63143
Telephone 888 356 5362 • Fax 314 781 5445
www.star-mfg.com
wide conveyor belts with independent speed and upper/lower
power controls.
• High-contrast color programmable digital display for speed/
heat settings, light/dark adjustment, melt timer, and system
diagnostics.
• There is no limit to the number of custom product settings.
• Reversible belt functionality is fully programmable.
• Belt speed and power can be synchronized with one-touch
control.
• Cool-to-the-touch stainless top and side surfaces for maximum
safety and durability.
• Easily accessible USB port allows for quick updates.
• Includes two (2) toasting paddles that measure approximately
9.5-inch by 5-inch and easily slide into the toasting chamber
to provide direct infrared heating to the product.
OPTIONS & ACCESSORIES
• Extra toaster paddles
CERTIFICATIONS
USA
MADE IN THE
Printed in the U.S.A. • 2M-Z21115 • Rev - • 04.2016
Specifications are subject to change without notice
and are not intended for installation purposes.
Impingement/Radiant Split-Belt
Conveyor Toaster
IRCS4
17.1 in.
15.5 in.
18.6 in.
31.3 in.
Toaster paddle storage
is located on the side.
0.9 in.
1.2 in.*
CLEARANCES
Please allow at least one (1) inch gap around both sides and rear
as well as at least two (2) inches on top of the unit.
MODEL
HEIGHT
in.
(mm)
WIDTH
in.
(mm)
DEPTH
in.
(mm)
VOLTS
IRCS4°
15.5
(394)
18.6
(795)
31.3
(795)
208
240
° patent pending
AMPS WATTS
22.5
19.5
4680
The six (6) foot power cord exits
the rear of the case here.
NEMA
PLUG
APPROX. SHIP
WEIGHT
APPROX. WEIGHT
INSTALLED
L6-30P
95 lb. (43.1 kg)
80 lb. (36.3 kg)
*adjustable up 0.5 in.
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change
without notice. While Star Manufacturing exercises good faith efforts to provide information that is accurate, we are not responsible for errors or
omissions in information provided or conclusions reached as a result of using the specifications. By using the information provided, the user assumes
all risks in connection with such use.
STAR MANUFACTURING INTERNATIONAL INC.
10 Sunnen Drive • Saint Louis, Missouri 63143
Telephone 888 356 5362 • Fax 314 781 5445
www.star-mfg.com
Printed in the U.S.A. • 2M-Z21115 • Rev - • 04.2016
Please refer to the owner’s manual for information
regarding installation or use.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising