User Manual

User Manual
SmartWash Seats
 The voltage required for this product should be in between
220 V - 240 V, 50 Hz - 60 Hz
 For your safety and proper use of the product, please read this user manual
before using the seat
 The Warranty Card is included in this manual
 Online registration for warranty activation is a must. Please visit
www.smartwash.world for more information
 Check for complete warranty clause on www.smartwash.world/warranty
SmartWash
Experience innovation at its best.
A complete solution.
One that is smart, hands-free,
and most importantly, blissful.
Feel the difference,
and perfect satisfaction,
in using this beautiful technology.
With advanced features
and diverse functions,
this superior product is,
‘Designed for Pleasure’.
Contents
 Safety Precautions
4
 The Main Unit
6
 Choosing the Right Seat
8
 Accessories
10
 Functions of the Remote Control & Control Panel
12
 Installation Process
17
 How to Install the Remote Holder
20
 How to Use Basic Functions
21
 How to Uninstall the Seat
23
 Manual Cleaning and Maintenance
24
 Troubleshooting
25
 Self-Diagnosis
26
 Product Specifications
27
 Product Features
29
 Terms and Conditions
31
 SmartWash Warranty Card
35
Safety Precautions
Caution: It is advisable to follow the precautions below carefully, for your safety.
 Do not cover the rear air vent. It may cause burns or a fire.
 Ensure that the product does not get wet when cleaning. It may cause a short circuit
or a fire.
 Unplug the seat if there is a beeping sound or a weird odour.
 Do not forcefully close the seat or the lid of the product. It may get damaged.
 Do not press the buttons too hard. The control panel may get damaged.
 Unplug the seat during a long absence.
 Do not drop water on the remote control and control panel. It may cause malfunction.
 Do not use a damaged power cord or plug, or a loose outlet.
 Please connect the power plug to a dedicated grounded electrical outlet.
 Do not lift the unit by its power cord.
 Do not touch the power plug with wet hands.
 Do not plug and unplug the power cord repeatedly.
 If the electric outlet is wet, carefully unplug the unit and let the outlet dry completely
before subsequent use.
 Unplug the seat before repair, inspection, or parts replacement.
 Remove any dust or water off the power plug before inserting.
 Do not plug the seat into an outlet that is being used by several other appliances.
It is preferable to use a dedicated outlet.
 Do not operate the seat if it has a damaged power cord or plug, if it is not working
properly, or if it has been dropped, damaged or dropped into water.
 In case the power cord is damaged, do not replace the cord yourself.
Call our service center to have it replaced.
 Do not insert a wire or sharp object in any of the gaps in the product or the
dryer outlet.
 Do not place an electric heater near the product or dispose of any inflammable material
such as a lit cigarette, in the toilet.
 Do not place any containers with water, medicine, food, small metallic objects,
or any flammable material on top of the product.
4
 Do not disassemble, repair, or modify the product without exercising discretion.
 Close supervision is necessary when this seat is used by children, the elderly or
disabled. Make sure to adjust the temperature of the toilet seat for anyone with
sensitive skin.
 Use the seat only for its intended purpose as described in this manual.
Do not use attachments not recommended by the manufacturer.
 Only authorized people can install or repair the seat. Do not attempt to repair this seat
by yourself. Doing so could void the warranty.
 Keep the power cord away from heated surfaces.
 Do not drop or insert objects into any openings or hoses.
 Being seated on a heated seat for a long time may cause minor skin irritation. Be aware
if the seat is being used by the following: a) Children, the elderly, patients,
or those who cannot control the temperature settings b) Sleeping pill users or people
who are on medication that cause drowsiness c) Who are intoxicated or tired and may
fall asleep while sitting on the unit. If the seat causes minor skin irritation, consult a
doctor immediately.
 Ensure that users do not insert their fingers in the gap between the lid cover and the
rear end of the seat while opening/closing. This may cause minor injuries.
 This seat can be used by children aged 7 and up with adult supervision.
 This product must be used in a bathroom setting only. Do not use the product for other
purposes that are not specified in the user manual.
 Do not pull out the mainline hose or the connection hose severely. This may damage
to the product.
• Do not install the product near a heating device.
• Avoid installing the product in places where the air is damp, dusty or moist.
• Do not place or use inflammable gases or flammable materials near the product.
• Do not use the seat’s control panel as a support or forcefully press it down. This may
damage the product.
 Do not stand and urinate. It should only be done while seated, so as to not splash on
the seat and cause damage. This is for your hygiene.
Safety Precautions
5
The Main Unit
Lid
Safety
Instruction Label
Main Body
Seat Sensor
Mesh Filter/Water Inlet
Spout
Toilet Seat/Bidet Seat
6
Ventilation
Power Cord
Mounting Plate
Seat Release
Button
Deodoriser Inlet
Aroma Tray
Basic Operating Panel**
C
F
B
D
LED Light
Fem
Power
Guide
Light
Cleanse
Dryer
Boost
*Some of the features shown above may not be included in your model.
** Available only in SmartWash Bliss, Utopia and Carbon.
The Main Unit
7
Choosing the Right Seat
Dimensions
The seat dimensions must be within those shown below. Do not install this product on a
toilet that does not meet these dimensional requirements.
Circular Seat
Elongated Seat
385 mm
385 mm
132 mm
132 mm
410 mm
275 mm
450 mm
300 mm
220 mm
200 mm
370 mm
370 mm
Rectangular Seat
385 mm
132 mm
410 mm
270 mm
200 mm
370 mm
8
Distance of Fixing Holes
Ensure that your toilet seat has holes anywhere between the dimensions below, to be able
to fix the seat correctly.
15.0 + 2.0
- mm (Diameter)
110 ~ 200 mm
> 45.0 mm
A flat surface area is required for fixing the seat perfectly. If your toilet has a curved surface
area (as shown below) you may not be able to fix the seat properly.**
Bad
Good
** To know more about the compatibility of your model, please refer to the style guide section
(under the ‘Product’ tab) on the website - www.smartwash.world
Choosing the Right Seat
9
Accessories*
1. Mounting Bracket
2. Mounting Plate
3 . Mounting Bolt
4. Mounting Nut
5. Rubber Bush
6. Rubber Washer
7. Inline Water Filter
8. Branch Fitting
9. Flush Tank Hose
11. De-Odour Catalyst
10. Aroma Cake
12. Main Water Hose
*These are additional accessories. Some of them may not be included in your model.
10
13. “AA” Size Alkaline Battery
+
+
+
-
-
-
14. Anchor Plug and Screw
15. Remote Holder
16. Rubber Pad Seat Cover
17. Rubber Pad Seat
18. Auto Flush Valve
19. Child Seat
*These are additional accessories. Some of them may not be included in your model.
Accessories
11
Functions of the Remote Control & Control Panel
The Remote Control and Control Panel are highly integrated smart systems that provide
complete comfort and cleaning. The design is user-friendly and intuitive. It comprises large
buttons and easy to understand icons for control of all functions and features.
The seat has a built-in sensor. This sensor is triggered on human body contact and is
completely safe for the user. The seat functions can be operated once the sensor registers a
person sitting down on the seat.
Cleanse Fem
Button Button
Power Child
Lid O/C Seat O/C
Button Button Button Button
LID
CHILD
Temperature
Button
SEAT
TEMP.
SETTINGS
Child Mode: On
E-Save: On
PULSE
MOVE
Blower Temp.
SPA
34 0
_
OK
+
FEATURES
BOOST
DRYER
PRESSURE
SPOUT
POSITION
Pressure
Button
Pulse
Button
Move
Spa
Button Button
Boost Dryer
Button Button
Spout
Button
BOWL
SPRAY
GREEN FLUSH
FULL FLUSH
Bowl Green
Button Flush
Full
Flush
Feature
Toggle
Decrease
Button
Increase
Button
**Display shown here is indicative. Actual display may vary based on user interface.
*Some of these features may not be included in your model.
12
Sensa Control Panel
Dryer Temperature
Toggle Button
Water Temperature
Toggle Button
Seat Temperature
Toggle Button
E-Save Button
Spout Position
Forward Button
Spout Cleaning
Button
Spout Postion
Backward Button
Dryer
Water Pressure
Increase Button
Water Pressure
Decrease Button
Child Button
Boost
Wash Button
Fem Wash
Button
Cleanse Wash
Button
Spa Button
Massage Button
Pulse Button
Power ON/OFF
Button
*Some of these features may not be included in your model.
Functions of the Remote Control & Control Panel
13
Elate Control Panel
Ease Control Panel
*Some of these features may not be included in your model.
Functions of the Remote Control & Control Panel
14
Power: By pressing the SmartWash logo on the panel/remote,
the seat powers on/off.
Cleanse: This function provides hands-free washing for the rear.
Pulse: This function provides a pulsating wash cycle for efficient cleansing
and stimulating the wash area.
Fem: This function provides hands-free frontal washing for women.
Massage: This function enables the spout to move to and fro, to provide a
massaging effect, using water.
Boost: This function increases the water pressure to full, for quick cleaning.
Spa: This feature is a combination of the Massage and Pulse functions along
with a warm seat and warm water.
Child: This feature is integrated with Cleanse, Fem and Boost and will take
care of all functional safety required for children.
Water Pressure: This function helps adjust the water pressure from the
spout, if the user needs to change the pre-defined water pressure.
Dryer: This function activates the dryer fan.
Spout Position: This function helps adjust the spout position, if the user
needs to change its pre-defined position.
E-Save: This function can be opted for to save electricity. It turns off the
heating and puts the seat on sleep mode when not in use.
*Some of these features may not be included in your model.
Please check the ‘Product Features’ section to know more.
Functions of the Remote Control & Control Panel
15
Spout Cleaning: This function is for cleaning the spout when the seat is not in use.
Seat Temperature: This function helps adjust the temperature of the seat.
The seat has an in-built heating coil below the seat, to provide controlled
warmth for comfortable seating.
Water Temperature: This function helps adjust the temperature of water.
The seat has an in-built instant water heater, to provide controlled warmth
for comfortable cleaning.
Dryer Temperature: This function helps adjust the dryer’s temperature.
Users can set the dryer temperature by toggling between the 3 options
provided, low—mid—high.
Seat O/C: This function opens/closes the seat automatically.
Lid O/C: This function opens/closes the lid of the seat automatically.
Bowl Spray: This function activates a small water jet to spray the bowl. It is
to be used before using the toilet.
Flush: This function flushes the toilet.
Green Flush: This function uses half the amount of water to flush, as
compared to the full flush.
Camo-Sound: This function plays an audio to camouflage any sound when the
toilet is in use.
Aroma: This function releases a pleasant fragrance into the air.
De-Odour: This function eliminates unpleasant odours present inside the toilet
bowl and purifies the air. This does not add any additional fragrance.
*Some of these features may not be included in your model.
Please check the ‘Product Features’ section to know more.
Functions of the Remote Control & Control Panel
16
Installation Process
Before Installing
1. Remove the bolts and detach the
existing toilet seat and lid.
2. Turn off the water supply valve
and detach the hose.
1
2
How to Install the Seat
3. Place the plate and guides over
each mounting hole. Insert the
mounting bolts with respect to the
sequence shown in the picture.
3
4. Slide the seat into the mounting
plate, until it clicks into place.
5. Once the seat position is
acceptable for the user,
tighten the bolts firmly.
3
4
5
*Ensure that all the fixures are tightened firmly.
**There may be some water left over in the product due to the
test and inspection process at the factory.
17
How to Install the Plumbing
6. Detach the existing pipe from the
water outlet.
6
7. The branch fitting has three
outlets. Attach one side of the
branch fitting to the water outlet.
10
8. Attach the second outlet of the
branch fitting to the water filter.
7
9. Attach the filter to the main water
line hose on the other end.
Connect this hose to the seat inlet.
10. Attach the flush hose to the third
outlet (middle outlet) of the branch
fitting and connect it to the
flush tank.
8
9
11
11. Open main valve for water supply.
12
Maintain vertical flush height
How to Install the Auto Flush Valve*
13. Fix a one inch male threaded
nipple (not in the list of accessories
provided) into the water line inlet
and outlet.
14. Connect the Auto Flush valve to
the water line.
15. Place the Auto-Flush valve on the
wall or conceal it inside the wall.
14 & 15
*This feature is only available with the SmartWash Utopia
and SmartWash Carbon seats.
Installation Process
18
of 200 mm – 600 mm.
12. Connect the power plug to the
electrical outlet. Make sure to use
a grounded outlet.
Auto Flush Valve
During power failures, use the
Manual Override option. Turn
back the manual override knob
to home position, to enable the
automatic operation again.
Turn the Flow
Controller
clockwise to
reduce water flow.
Coil
Air Bleedvalve
Flow
Outlet
Inlet
16
16. Connect the DC Jack to the outlet
available in the product.
Installation Process
19
How to Install the Remote Holder
1
1. Attach the remote holder on the wall
using the anchor plugs and tighten
with screws.
2
2. Slide the remote downwards on the
holder to lock.
20
How to Use Basic Functions
Cleanse and Fem Wash
 Sit and press the ‘Cleanse’ button on the remote control/panel.
The spout will spray room temperature water to the rear end.
For front washing, female users can press the ‘Fem’ button.
 While washing, users can adjust the water temperature, water
pressure, seat temperature and spout position according to
their preference.
 The water sprays for two minutes and then automatically stops.
Users can also stop it before two minutes, by pressing the
Power button.
 If the ‘Pulse’ feature is selected when the Cleanse/Fem is in
operation, a pulsating action gets activated.
 The spout gets cleaned automatically before and after every
use. This may take up to five seconds.
Boost
 Press the ‘Boost’ button on the remote control/panel.
 The spout increases water pressure to full, for quick cleaning.
 This function works upto 2 minutes.
Massage
 Press the ‘Massage’ button on the remote control/panel.
 The spout moves back and forth, providing a wider range for washing.
 To stop the function, press the ‘Massage’ button again.
*Some of these features may not be included in your model.
Please check the ‘Product Features’ section to know more.
21
Dryer
 Press the ‘Dryer’ button on the remote control/panel.
 Warm air blows for about two minutes to dry.
 Adjust the dryer temperature by pressing the ‘Dryer Temp.’ button.
Child
 Press the ‘Child’ button on the remote control/panel to make the
seat automatically goes into child safety mode.
 Temperature functions will become low.
 Press Cleanse or Fem as per the user’s preference.
 The spout moves forward for easy cleaning of the child.
E-Save
 Press the ‘E-Save’ button on the remote control/panel.
 All the LED lights will turn off.
 This function will help save electricity.
*Some of these features may not be included in your model.
Please check the ‘Product Features’ section to know more.
How to Use Basic Functions
22
How to Uninstall the Seat
1
1. Unplug the seat from main power
outlet.
2&3
2. Turn off the main water supply valve.
3. Drain any remaining water from the
water line.
4
4. Slide the seat from the mounting plate
by pressing the seat release knob.
4
5
5. Remove the mounting bolts and lift the
mounting plate.
23
Manual Cleaning and Maintenance
Seat Cleaning
Use soft sponges and neutral detergents
when wiping the seat.
Spout Cleaning
To clean the spout, press the ‘Spout Cleaning’
button. The spout comes out for 2 minutes,
before returning to its original position.
During this operation, the spout will spray
water in a low pressure for easy cleaning.
It is recommended to clean the spout at least
once every month.
Mesh Filter Cleaning
To clean the mesh filter, disconnect the water
line hose from the seat inlet. A small mesh
will be visible. Clean this mesh using a soft
cloth/brush.
Aroma Cake Replacement
Open the aroma tray and replace the
fragrance cake. Make sure to fit it back in the
allotted space. It is recommended to replace
the cake once in every 15 days.
Inline Water Filter Replacement
Turn off the water supply valve.
Disconnect the hose to replace the filter with
a new one. It is recommended to replace the
filter once in 4-6 months, based on the
frequency of usage.
24
Troubleshooting
Problem
The seat is not functioning
Indication
 Main connection; socket and plug
 Power button in user interface panel
 Power failure
The spout is not spraying water
 Main water supply
 Spout, for any foreign particle
or blockage
 Clean mesh filter at water inlet
connection of the product by
removing the hose
The water pressure is low
 Water pressure setting
 Blockage in the spout or mesh filter
Seat is not warm; water is not warm;
air is not warm
 Relevant temperature settings on
the remote control/panel
 Electricity
A strange noise is coming from the seat
 It is normal to hear some noise.
The noise level will vary based on
various operations
Water is leaking from the product
 The water drain provision is provided
near the spout to remove excess
water during cleaning. It is not a
malfunction
25
Self-Diagnosis
Symptom
Things to Check
The spout is not spraying water
A buzzer and a red LED light in the panel
will start blinking
Seat is not heating up
A continuous buzzer and temperature
indicator LED light in the panel will
start blinking
Water is not heating up
A continuous buzzer and temperature +
pressure indicator LED light in the panel will
start blinking
Dryer is not blowing warm air
A continuous buzzer and temperature +
pressure indicator LED light in the panel will
start blinking
26
Product Specifications
Description
Specifications
Ease
Elate
Rated Voltage
35 W
90 W
Carbon
Water
Volume
1500 W
1500 W
1500 W 1500 W
Directly Connected to the Water Pipe
Water Supply Method
Cleanse
0.36 to 1.08 L/min @ water pressure 0.02 MPa
Fem
0.36 to 1.08 L/min @ water pressure 0.02 MPa
Child
NA
Water Temp
NA
0.36 to 0.84 L/min @ water pressure 0.02 MPa
0.82 to 1.08 L/min @ water pressure 0.02 MPa
Boost
NA
NA
34°/37°/40°C
Heater Capacity
NA
NA
1500 W
Safety Device
NA
NA
Bimetal
Back Flow
Prevention
Device
Dryer
Utopia
1.8 mts
Power Cord Length
Seat
Bliss
AC 220 V ~ 240 V, 50 Hz
Max Power Consumption
Cleaning
Function
Sensa
Inbuilt Check Valve
Temperature
Control
NA
Surface
Temperature
NA
34°/37°/40°C
Heater
Capacity
NA
55 W
Safety
Device
NA
Air Flow
NA
NA
0.24 to 0.28 m 3/min
Heater
Capacity
NA
NA
300 W
Safety
Device
NA
NA
Thermal Fuse
NA
Bimetal
Thermal Fuse
27
Description
Deodorizer
Specifications
Ease
Elate
Sensa
Method
NA
NA
NA
o₂ deodorizing
Air Flow
NA
NA
NA
0.128 to 0.143 m3/min
NA
NA
NA
2.16 W
Power
Consumption
Water Supply Pressure
Bliss
Feed Water Temperature
0 ~ 35⁰C
0 ~ 40⁰C
Product Safety for
High Voltage and Current
Product
Weight
(kg)
Inbuilt MOV and Fuse
Circular
385 (W) x130 (H) x 505 (L)
Elongated
385 (W) x130 (H) x 545 (L)
Rectangular
385 (W) x130 (H) x 520 (L)
Circular
3.8
4
4
4.2
4.5
Elongated
4.2
4.4
4.7
Rectangular
4.5
4.7
4.9
5.2
Product Specifications
Carbon
0.07 to 0.75 Mpa
Ambient Temperature
Product
Dimension
(mm)
Utopia
28
Product Features
Function
Ease
Elate
Sensa
Bliss Utopia Carbon
SmartWash
- ON/OFF
Cleanse
Wash / Dry /
Fragrance Functions
Fem
Child
Dryer
De-Odour
Aroma
E-Save
Massage
Boost
Pulse
Seat Sensor
Spa
Essential
Functions
Spout Cleaning
- Manual
Spout Cleaning
- Auto
Spout Adjustment
- As per need
from Home
to Work Position
Water Pressure
- 5 Set Points
Safety
Functions
Self Check
while Power ON
Self-Diagnosis
Battery Life
Indication
Anti-Bacterial
Coating
Warm Seat
Comfort
Functions
Water Heating
Automatic
Seat Closing
Automatic
Lid Closing
29
Function
Ease
Elate
Sensa
Bliss Utopia Carbon
Remote
Seat Soft Closing
Lid Soft Closing
Advanced
Functions
Wi-Fi
Carbon
Foot Print
Bowl Spray
Auto Flush
Green Flush
Add-Ons
Camo-Sound
- Running Water
Guide Light
Commode
Artwork
Optional
Add-Ons
Child Seat
In-line Water Filter
Product Features
30
Terms and Conditions
1.
These Terms and Conditions will apply to the purchase of the goods along with the
spare parts detailed in our Invoice (hereinafter referred to as “the Product/s”) by the
buyer (“you”) from Dr. Wiesner Test & Automation.
The following warranties replace all other warranties and liabilities, whether oral,
written, (non-mandatory) statutory, contractual, in tort or otherwise, including,
without limitation, and where permitted by applicable law, any implied conditions,
warranties or other terms as to satisfactory quality of fitness for purpose and of any
other warranty obligation on the part of seller.
A. Scope of Warranty
i.
We, except as otherwise hereinafter provided, warrants the Product against faulty
workmanship or the use of defective materials and that such Products will conform to
the written specifications, drawings, and other descriptions for a period set forth in the
sub-clause (ii) below.
ii.
We warrant that at the time of delivery, we have the title to the Product free and clear
of any and all liens and encumbrances, subject to you paying the full Purchase Price.
iii. We, at our decision, pursuant to its obligations under the Warranty:
a. Repair or replace the defective Product or part;
b. Pay the cost of repairing the defective product or part at our discretion;
c. Refund the purchase price to the purchaser/you
d. Make appropriate adjustment
iv. These warranties at iii (a), (b) & (c) above are the only warranties made by us
and can be validly amended only by us, via a written instrument signed by one
of the authorized officers.
vi. The Warranty applies only within India and only to the original purchaser.
B.
The Purchaser shall be responsible for and shall meet all charges in respect of making
the defective product accessible for repair or replacement.
C.
Use of Cleaners: Use of chemicals such as bleach, hair dye, solvents, alcohol, citrus
based chemicals, or abrasive cleaners on any part of the Product will void the warranty.
D. Warranty Period
The warranty period offered by us will be as specified in your Purchase Order. Unless
agreed upon otherwise by us, in writing, the Warranty period shall expire 12 months
after delivery of the Product.
31
e.
Notification of a Defect
You shall inform us in writing or in any other method notified by us, of any defect in
the Product noticed during the warranty period not later than two weeks from first
noticing the same. On receipt of your notice, we or any third party entrusted by us
shall rectify the faults. The option to repair or replace any parts shall solely rest with
us. You shall not return the Products or any part thereof to us before receiving our
confirmation, in writing, to that effect.
You shall inform us within 15 (Fifteen) days on receiving the Product of any defects in
the Product. You shall not be entitled to any warranty in the event of your failure to
inform us within the stipulated time line.
f.
Exclusion of Warranty
i.
If the Product is not purchased from us or our authorized Sales Dealers.
ii.
If the Product purchased is not installed, maintained or used according to
instructions given in the User/Instruction Manual or determined by our personnel.
iii. If the Warranty Card is not filled and mailed back/submitted to us or our
Authorized Service Centre within 2 weeks of purchase or not registered with on our
website as specified in the User Manual.
iv. The Product is being used for commercial use/purpose or in any place which in our
determination can be construed as commercial usage.
v.
The site (premises where the Product is kept/used) conditions do not conform to
the recommended operations of the Product/unit.
vi. The original Serial Number is removed, obliterated or altered from the Product.
vii. Defects due to causes beyond control such as lightning abnormal voltage, acts of
god or while in transit to the Service Centre or to the Purchaser’s residence.
viii. Defects caused by household pets, rats, rodents, insects etc.
ix. Any damage to the Product caused due to improper use, due to accident, improper
installation or handling, improper care and cleaning, alteration, abuse,
misuse, faulty repairs, usage etc, as determined by our personnel.
x.
We shall not be responsible for any defect or damage caused due to any alterations,
addition, or repair carried out to the Products by any person not authorized by us to
carry out such alterations, addition or repair.
xi. We shall not be responsible for any defect or damage caused to the Product, directly or
indirectly, due to mishandling, misuse of the Product, misconduct or
negligence on your part or your agents to operate the Product as recommended
by us in the User Manual, a copy of which shall be provided with each unit.
xii. Parts which deteriorate due to wear and tear, consumables or any such parts
not specifically covered under this warranty shall be outside the scope of
this warranty.
Terms and Conditions
32
xiii. The items not manufactured by us or any of its affiliates/sister concerns will not
be covered under the scope of this warranty, unless otherwise specifically
mentioned.
6. Post Warranty Service
Post warranty service will be made available through Bengaluru and its decentralize
service engineers stationed all over India. Our Head Office address is:
Dr. Wiesner Test & Automation Pvt. Ltd (DRWTAPL),
#147, 6th Main, 3rd Cross, Industrial Suburb,
2nd Stage, Yeshwanthpur Industrial Layout,
Near Tumkur Road, Bengaluru – 560 022
7. The logo/image/word mark of “SmartWash” is our Trademark and cannot be used or
communicated or distributed without our specific and written permission. By virtue of
purchasing our Product, you understand and agree that you have no kind of ownership
or title or claim over our trademarks either registered or otherwise.
8. To the extent permitted by applicable law, the aggregate liability on us arising under
these terms & conditions and/or contract for the purchase of Products shall be limited
to the purchase value of the Product or the insurance cover taken by us, if any, to cover
the claim/damage which has occurred, whichever is lower.
9. Products Colour
All Products exhibited on our brochures, website and other sales documentation are on
an “as is” and “as available” basis. Images and the colour of products are for and by
reference only and the actual Product and colour may vary from the corresponding
image exhibited. We disclaim any liabilities arising out of any discrepancies to this end.
10. Intellectual Property Rights
a. You shall only have the right to use the software, technical know-how, operating
instructions, product brochures/data sheet and any other proprietary information
supplied. The ownership of such items shall clearly vest and remain with us. You
shall not violate breach or infringe the said rights in any manner whatsoever.
b. You shall indemnify, defend, and hold us as well as our affiliates/Contract
Manufacturers harmless against all claims, demands, and expenses, including but
not limited to legal fees, arising from our manufacture and supply of the Products to
you, whether for breach or damage to any intellectual property rights or other
proprietary rights of any third party.
11. Relationship between the Parties
It is expressly agreed that all transactions between us shall be on principal-to-principal
basis and that nothing hereunder or in the order shall constitute or be deemed
constitute either party as the agent or employee or hirer or laborer of the other.
12. Governing Law and Arbitration
a. This Agreement shall be governed by the laws of India, and the courts of Bengaluru
shall have the jurisdiction to try and disputes arising hereunder.
Terms and Conditions
33
b. Any dispute or difference or claim arising out of or in relation to this transaction
including construction, validity performance or breach thereof shall, failing amicable
settlement be referred to a sole arbitrator under The Arbitration Centre- Karnataka
presently located at Khanija Bhavan, Race Course Road, Bengaluru-560001 and the
Rules set out by them and any subsequent amendments thereof for time being in force.
Such arbitration shall take place in Bengaluru, and the arbitration proceedings shall be
conducted in the English language. Award of arbitration shall be final and binding on
parties and shall be enforceable in any court of law.
13. Legal Construction
The contract shall be construed and operated as Indian/contract and in conformity
with Indian Law. All correspondence & commitments between us and you, to be
enforceable at law, shall be in writing.
14. Notice
Any notice required or permitted hereunder shall be in writing and shall be deemed
duly served upon receipt, when delivered personally or by a delivery service of 72
(seventy-two) hours after being deposited in the mail as certified or registered mail
with postage prepaid. Notices shall be addressed to the address provided in the
Purchase Order or provided by you in writing.
Terms and Conditions
34
SmartWash Warranty Card
Dear SmartWash Customer,
Please retain this warranty card carefully. Attach your purchase receipt to this warranty
card. This warranty will be valid only after registering the product online. You must produce
both, the warranty card and the proof of purchase in the event of a repair.
Customer Details:
Name:
Address:
Pincode:
Contact No.:
Email:
Product Details:
SmartWash Model:
Serial No.:
Purchased From:
Online | DSA | Dealer | Distributor | Others
Name:
Address:
Pincode:
Contact No.:
Purchased On:
Purchase Date:
Invoice No.:
Note:
 This warranty is valid for 1 year from the date of purchase.
 This warranty is valid only after registering the product online.
 This warranty is non-transferable.
 This warranty will be void, if the product is subjected to unauthorised repair or damage
due to impact.
 Erasure, alteration or defacement of this form invalidates the warranty.
35
Registered Office:
#147, 6th Main, 3rd Cross, Tumkur Road, Industrial Suburb,
2nd Stage, Yeshwantpur Industrial Layout, Bengaluru, Karnataka 560022
www.smartwash.world
D2L0106P004-R1
Call Toll Free: 1800 300 28525
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising