OM, Gardena, Quiet Power Chaff Cutter, Art 03980-20, Art 03982

OM, Gardena, Quiet Power Chaff Cutter, Art 03980-20, Art 03982
®
GARDENA
S 2000 S
S 2300 SP
D
Gebrauchsanweisung
Leise-Powerhäcksler
GB Operating Instructions
Quiet Power Chaff Cutter
F
Mode d’emploi
Broyeur silencieux
NL Gebruiksaanwijzing
Hakselaar
S Bruksanvisning
Tystgående Kompostkvarn
I
Istruzioni per l’uso
Biotrituratore
E Manual de instrucciones
Trituradora silenciosa de gran potencia
P Instruções de utilização
Corta-palha potente e silencioso
DK Brugsanvisning
Støjsvag kompostkværn
Art. 3980
Art. 3982
D
Bitte lesen Sie diese Gebrauchsanweisung vor Montage und Inbetriebnahme Ihres Gerätes sorgfältig.
Beim Lesen der Gebrauchsanweisung bitte die Umschlagseite herausklappen.
Inhaltsverzeichnis
Seite
Technische Daten
5
2. Hinweise zur
Gebrauchsanweisung
5
3. Ordnungsgemäßer Gebrauch
5
4. Montage
5
5. Inbetriebnahme
6
6. Richtiges Häckseln
7
7. Wartung, Pflege,
Aufbewahrung
8
8. Hinweise zur ordnungsgemäßen
Benutzung, Sicherheitshinweise
9
9. Störungen
10
Garantie
62
G
Please read these operating instructions carefully before assembling and
using your Chaff Cutter.
Unfold inside cover pages to read the
operating instructions.
Contents
1. Technical Data
2. Operating Instructions
Information
3. Proper Use
4. Assembly
5. Putting into Operation
6. Correct Working with
the Chaff Cutter
7. Maintenance, Care, Storage
8. Advice for Proper Use /
Safety Instructions
9. Faults
Guarantee
Page
12
12
12
12
13
14
15
15
16
62
F
Nous vous remercions de bien vouloir
lire attentivement ce mode d’emploi
avant le montage et l’utilisation de
votre appareil. Dépliez le 2ème volet
de la couverture pour avoir les illustrations sous les yeux pendant la
lecture du mode d’emploi.
Contenu
1. Caractéristiques techniques
2. Informations sur le mode
d’emploi
3. Domaine d’utilisation
4. Montage
5. Mise en marche
6. Comment bien broyer
7. Maintenance, entretien,
entreposage
8. Conseils de sécurité et
précautions d’emploi
9. Incidents de fonctionnement
Garantie
Page
18
18
18
18
19
20
21
21
22
62
N
E
Lees deze gebruiksaanwijzing voor
de montage en ingebruikname
van het apparaat zorgvuldig door.
Bij het lezen van de gebruiksaanwijzing de omslagzijde openslaan.
Inhoudsopgave
1. Technische gegevens
2. Aanwijzing bij de gebruiksaanwijzing
3. Juiste gebruik
4. Montage
5. Ingebruikname
6. Op de juiste manier hakselen
7. Onderhoud en opslag
8. Aanwijzing voor het juiste
gebruik, veiligheidstips
9. Storingen
Garantie
Lea detenidamente estas instrucciones
de este montaje y de la puesta en
marcha del aparato.
Durante la lectura, rogamos desdoble
la portada.
Pagina
24
24
24
24
25
26
27
27
28
62
S
Läs omsorgsfullt igenom bruksanvisningen före montering och användning.
Vik ut omslagssidan när Du läser
bruksanvisningen.
Innehåll
Sida
1. Tekniska data
30
2. Anmärkningar för bruksanvisning
30
3. Avsedd användning
30
4. Montering
30
5. Idrifttagning
31
6. Korrekt kompostmaterial
32
7. Underhåll, skötsel, förvaring
33
8. Anvisningar för korrekt användning, säkerhetsanvisningar
33
9. Felsökning
34
Garanti
63
I
Prima di montare e mettere in uso
l’attrezzo, leggere attentamente le
istruzioni tenendo aperto il pieghevole per avere sott’occhio i disegni
esplicativi.
Indice
1. Dati tecnici
2. Avvertenze
3. Uso corretto
4. Montaggio
5. Messa in uso
6. Modalità funzionali /
Condizioni operative
7. Manutenzione
8. Norme d’uso e di sicurezza
9. Anomalie di funzionamento
Garanzia
Indice
Página
1. Datos técnicos
42
2. Indicaciones al manual
de instrucciones
42
3. Uso correcto
42
4. Montaje
42
5. Puesta en marcha
43
6. Desbrozar correctamente
45
7. Mantenimiento, conservación,
almacenamiento
45
8. Indicaciones para un correcto
uso / indicaciones de seguridad
46
9. Averías
47
Garantía
63
P
Leia atentamente estas instruções
antes de montar ou utilizar esta
máquina.
Para ler este manual de instruções,
desdobre a capa.
Indice
Página
1. Dados técnicos
49
2. Informação sobre as
instruções de manejo
49
3. Utilização correcta
49
4. Montagem
49
5. Colocação em funcionamento
50
6. Triturar correctamente
51
7. Manutenção, conservação e
armazenagem
52
8. Conselhos para uma utilização
correcta / instruções de segurança 53
9. Falhas
54
Garantia
63
K
Pagina
36
36
36
36
37
38
38
39
40
63
Læs denne brugsanvisning omhyggeligt igennem før montering og igangsætning af apparatet.
Klap brugsanvisningens omslagsside
ud under læsningen.
Inhold
Side
1. Tekniske data
56
2. Henvisninger til brugsanvisningen 56
3. Korrekt anvendelse
56
4. Montering
56
5. Igangsætning
57
6. Korrekt anvendelse
59
7. Vedligeholdelse, pleje,
opbevaring
59
8. Henvisninger til den korrekte
anvendelse, sikkerhedshenvisninger
59
9. Fejl
60
Garanti
63
Beachten Sie die Sicherheitshinweise auf dem Gerät :
Please adhere to the following safety instructions on the casing :
Veuillez respecter les conseils de sécurité figurant sur l’appareil :
Houdt rekening met de veiligheids-aanwijzingen op het apparaat :
Beakta säkerhetsanvisningarna på kompostkvarnen :
Attenzione ai simboli di sicurezza riportati sull’attrezzo :
Observen las indicaciones de seguridad en el aparato :
Por favor siga atentamente as instruções de segurança fornecidas no aparelho :
Iagttag sikkerhedshenvisningerne på apparatet :
Achtung! Vor Inbetriebnahme
Gebrauchsanweisung lesen !
Warning! Read instruction handbook !
Attention ! Merci de lire attentivement le mode d’emploi avant d’utiliser cet appareil !
Let op! Voor ingebruikname
gebruiksaanwijzing doorlezen !
Observera ! Läs bruksanvisningen
före användning !
Attenzione ! Prima di mettere in uso
l’attrezzo, leggere attentamente le
istruzioni !
¡Atención ! Antes de la puesta en
marcha, lea el manual de instrucciones.
Atenção! Leia atentamente este
manual de instruções antes de usar
o aparelho.
Pas på! Før igangsætning skal
brugsanvisningen læses !
Achtung, Gefahr!
Umlaufende Schneidwerkzeuge!
Warning! Rotating tools!
Attention ! Danger !
Système de coupe à rotation.
Let op ! Gevaar !
Roterende snij-inrichting !
Observera ! Kvarnen innehåller en
roterade vass klinga !
Attenzione ! Pericolo ! Lame in
rotazione !
¡Atención! ¡Peligro! Cuchillas
rotativas.
Atenção ! Lâminas rotativas.
Advarsel, fare ! Roterende skæreværktøj !
4
Vor Arbeiten am Schneidwerkzeug
Netzstecker ziehen!
Before maintenance, disconnect
the plug from the mains !
Débranchez l’appareil avant toute intervention sur le système de coupe !
Voor werkzaamheden aan de snijinrichting, stekker uit het stopcontact
halen !
Dra ur eluttaget innan Du rengör
eller justerar klingan !
Prima di qualsiasi intervento sull’attrezzo, staccare la spina dalla
corrente !
Para ejecutar trabajos de limpieza,
control o de mantenimiento desenchufe el aparato.
Antes de qualquer operação de reparação desligue a ficha da tomada.
Før arbejde på skæreværktøjet
skal netstikket trækkes ud !
Dritte aus dem Gefahrenbereich
fernhalten !
Keep bystanders away !
Maintenez toute personne hors
de la zone de travail !
Zorg ervoor dat derden buiten de
gevarenzone blijven !
Se till att inga barn eller obehörig
befinner sig i riskområdet !
Tenere lontano i terzi dalla zona
di lavoro !
¡Mantener alejados a terceros del
área de trabajo !
Mantenha terceiros fora da área
de perigo !
Andre personer må ikke komme
ind i farezonen !
Augen- und Gehörschutz tragen !
Wear eye and hearing protectors !
Portez des lunettes de protection
ainsi qu’un casque anti-bruit.
Draag oog- en gehoorbescherming !
Använd skydd för ögon- och öronskydd !
Indossare cuffie auricolari e
occhiali di protezione !
Llevar protección de ojos y oidos.
Utilize protecção para os olhos
e para os ouvidos !
Anvend øjen- og høreværn !
Achtung, Gefahr ! Hände und Füße
von Öffnungen fernhalten, während
die Maschine in Betrieb ist.
Danger ! Keep hands and feet out of
openings while machine is running.
Attention – danger ! Tenez mains et
pieds éloignés des ouvertures pendant le fonctionnement de l’appareil.
Let op ! Gevaar ! Houdt handen en
voeten weg bij de openingen als de
machine loopt.
Observera ! Håll inga kroppsdelar
(händer, fötter) vid öppningarna
under användning.
Attenzione, pericolo ! Quando l’attrezzo è in funzione, tenere sempre
mani e piedi a distanza di sicurezza
dalla tramoggia e dallo scarico.
¡ Peligro ! Mantener manos y pies
fuera de las aberturas cuando la
máquina esté funcionando.
Perigo ! Mantenha as mãos e pés
longe das aberturas enquanto a
máquina estiver a trabalhar.
Advarsel, fare ! Hænder og føder
skal holdes borte fra åbninger under
drift af maskinen.
G
GARDENA Quiet Power Chaff Cutter S 2000 S / S 2300 SP
1. Technical Data
S 2000 S
S 2300 SP
Length
Width
Height
Weight
530 mm
482 mm
876 mm
23 kg
530 mm
482 mm
876 mm
24 kg
Power consumption
Voltage
Frequency
Fuse
ON-time
Nominal speed of motor
Nominal speed of cutting cylinder
Branch diameter of newly cut wood
Branch diameter of dry wood
2000 W
230 V
50 Hz
16 A
AB S6 4 / 6
2790 rpm
40 rpm
up to 40 mm
up to 30 mm
2300 W
230 V
50 Hz
16 A
AB S6 4 / 6
2760 rpm
40 rpm
up to 45 mm
up to 30 mm
Working area related emission
characteristic value L p A 1)
Noise level L WA 1)
82 dB (A)
95 dB (A)
82 dB (A)
95 dB (A)
1) Measuring method according to RAL UZ 54
2. Operating Instructions Information
Please read and follow these
operating instructions carefully.
Familiarise yourself with the unit’s
features, its proper use and the
safety instructions included.
For safety reasons children under the age of
16 or people not familiar with
these operating instructions
must not use this Chaff Cutter.
A
Please keep these instructions
in a safe place.
F
G
G
Motor protection switch
Cutting cylinder
4.3 Assembling the Trolley
(Fig. B)
Fit the two wheels 1 supplied
to the trolley 2 as follows:
1. Push the wheel 1 onto the
axle 4 of the trolley.
Note : Mount the wheel
correctly according to fig. B.
2. Push the stop onto the screw
5 and insert the complete
assembly into the hole of the
axle in the trolley and screw
tight.
3. Fit the second wheel as described above. The chaff cutter
can now be mounted on the
trolley.
4.4 Mounting the Chaff Cutter
on the Trolley (Fig. C)
Mount the chaff cutter 3 on the
trolley 2 as follows:
5. Putting into Operation
5.1 Location
Stand the Chaff Cutter on an
even, sturdy and stable surface.
To prevent injuries due to
material which is thrown back
out of the Chaff Cutter, do not
stand the Chaff Cutter on pebbles or a cemented surface.
Do not feed any more material
to be cut into the Chaff Cutter
once the cutting tool has
stopped.
5.2 Connecting the
Chaff Cutter to the Mains
To connect the Chaff Cutter to
the mains, plug the coupling of
the extension cable into the socket 0 of the Chaff Cutter and the
plug into the mains socket.
5.3 Commissioning the
Chaff Cutter (Fig. D / E)
Important ! Pay attention to the
information regarding proper
use and the notes on safety
before you start using the Chaff
Cutter.
The Chaff Cutter must be assembled correctly before the
motor is turned on. The feeding
funnel must not contain material to be cut.
3. Proper Use
A
The GARDENA chaff cutter is
designed for cutting organic
material e.g. plant waste, in
domestic and hobby gardens.
Only use permitted extension
cables. Ask your electrician.
Keep your face and body away
from the feeding funnel.
The connection sockets for
extension cables must be made
of rubber or be encased in
rubber according to DIN VDE
0620.
Keep your hands, feet and
other parts of your body as well
as clothes away from the feeding area and ejection shaft.
It is not designed for use in public
facilities, parks, sporting grounds,
on roads, in agriculture or forestry.
It is essential to observe the
manufacturer’s operating instructions to ensure the unit’s proper
functioning.
The operating instructions also
contain advice for service, maintenance and repair.
Warning ! The Chaff Cutter
is not suitable, for example, for preparing soil and must
never be used to chop or cut
metal parts. Danger of injury !
A
4.1 Checking whether all
the Parts are Included
The GARDENA Chaff Cutter box
contains the following parts:
.Chaff cutter
.Trolley
.2 wheels
.Plastic bag with connection
parts and fork wrench
(10 /13 mm)
12
Important Information !
Never trail the cable over or
underneath the feeding funnel.
Danger of accidents and
damage !
4. Assembly
.Operating instructions
4.2 Operating Parts (Fig. A)
1 Wheels
2 Trolley
3 Chaff Cutter
4 Axle
5 Screws (4.2 x 19 mm)
with stops
6 Feeding funnel
7
8
9
0
A
B
C
D
E
Screws
Holes
Hexagon nuts / washers
Chaff Cutter socket
Up / down switch
Main switch
Adjusting screw
Counter nut
Cutting plate
1. Place the chaff cutter 3 on the
trolley 2 as shown in diagram
C and insert the two screws 7
in the holes 8.
Note : Ensure that the chaff
cutter is positioned correctly
on the trolley and is not tilted.
2. Secure both screws 7 to the
trolley from underneath using
the washers and hexagon
nuts provided 9.
When laying the mains cable
make sure that it does not trail
through open doors or windows. Danger of squashing
the cable.
To prevent damaging the cable,
pull the plug to remove it from
the socket. Never pull the cable.
To begin using the Chaff Cutter:
1. Set the up / down switch A of
the cylinder to the position
(Fig. D 1) (normal working
position of the cutting cylinder).
2. Press the green button on the
main switch B to switch on the
Chaff Cutter. The cutting cylinder starts.
Important ! Always wait until
the cutting cylinder has
stopped when changing directions with the up / down switch
A; otherwise the cutting cylinder might not change direction.
3. Now feed the material to be
cut into the feeding funnel 6
(max. strength – see “Technical
Data”).
Note : After the cutting tool has
taken hold of the material to
be chopped, it is automatically
pulled in (Fig. E).
Always wear gloves
and protective goggles
when working with the Chaff
Cutter.
A
5.4 The cylinder is blocked ...
if foreign bodies, too much material to be cut or branches which
are too thick are caught in the
cylinder.
Proceed as follows:
1. Set the up / down switch A
to the position (backwards)
(Fig. D 2). The Chaff Cutter
stops.
2. Press the green button on
the main switch B to switch
on the machine again. The cutting cylinder turn in position
and the material to be cut is
now released upwards.
5.5 If the material to be cut
is not released despite backwards position (completely
blocked), then the internal cutting
plate E is to be removed from
the cutting cylinder as described
below:
13
G
1. Switch off the Chaff Cutter;
press the red button on the
main switch B.
2. Pull the mains plug and wait
until the cutting cylinder stops.
3. Loosen the counter nut D and
turn the adjusting screw C
some rotations to the left, in
order to loosen the blockage
with the backwards position
of the cutting cylinder:
4. a) If the material to be cut has
already been completely
pulled into the Chaff Cutter,
then set the up / down switch
A to position, fig. D 2.
Plug in the mains plug into
the mains and press the
green button of the mains
switch B to switch on the
Chaff Cutter.
If the material was released,
then put the up / down switch
A to position (forward),
fig. D 1, to transport the
material downwards.
b) With longer material to
be cut, which is still sticking
out of the Chaff Cutter, set
the switch to the position
(backwards). Press the
green button on the main
switch B to start the Chaff
Cutter again. The blocked
material is now released upwards. Remove the released
material from the feeding
funnel.
5. Set the up / down switch A to
normal position.
6. If the cutting plate E was loosened by a blockage, it must
be readjusted as described
in “Maintaining the Cutting
Device”.
5.6 If the direction of rotation
changes automatically ...
e.g. if the Chaff Cutter is suddenly
blocked and the material to be
cut is released upwards, then
you should:
1. Switch off the Chaff Cutter by
pressing the red button on the
main switch B.
Note : Wait until the cutting
cylinder has stopped turning.
2. Switch the Chaff Cutter on
again by pressing the green
button on the main switch B.
You can now continue to work
with the Chaff Cutter.
5.7 Blockage Protection is
Activated (Fig. E)
The GARDENA Chaff Cutter is
fitted with a blockage protection.
If the motor is extremely overloaded, in particular if the cutting
cylinder is blocked, the motor
protection switch F is activated.
It switches the Chaff Cutter off
after a blocking period of approx.
8 - 12 seconds.
1. After the Chaff Cutter has
switched itself off automatically
due to the blockage protection
function, wait for approx.
5 minutes before restarting
the Chaff Cutter.
2. After this cooling period time,
press the motor protection F.
The Chaff cutter may now be
turned on again.
5.8 Switching off the
Chaff Cutter
To switch off the Chaff Cutter,
press the red button on the main
switch B.
Warning ! The cylinder does
not stop turning immediately
after the Chaff Cutter has been
switched off. Danger of injury !
The Chaff Cutter must
be assembled correctly
before the motor is turned on.
If you leave the Chaff Cutter
unattended, the motor must
be switched off and the mains
plug must be removed from
the socket.
A
If the Chaff Cutter is
moved to another place,
the motor must be turned off
and the mains plug must be
removed from the socket.
Wait until the cutting cylinder
has stopped moving.
A
Always wear gloves and
safety goggles when
you are working with the Chaff
Cutter.
A
14
Never stand at a higher
level than the base of the
machine when feeding material
into the feeding funnel.
A
6.2 Special Information
Regarding Working with the
Chaff Cutter
The suitability of GARDENA Chaff
Cutters for cutting garden waste
which is soft and contains large
amounts of sap (e.g. pomaceous
fruit, wet plant waste) is limited.
This material should be composted directly. Otherwise, when cutting the waste mentioned above,
a mass is created which is impermeable to air, which leads to rotting and unpleasant smells which
have a negative effect on a good
compost heap.
7. Maintenance, Care, Storage
7.1 Maintenance
General Information
Maintenance and repairs,
especially those that require
to remove the safety devices,
may only be carried out by
GARDENA Service centres
or dealers authorised by
GARDENA.
The Chaff Cutter must
only be maintained and
cleaned and the safety devices
may only be removed after
the motor has been turned off,
the cylinder has stopped moving, and the mains plug has
been removed from the socket.
Wear protective gloves to avoid
injuries.
Maintenance includes work which
keeps the Chaff Cutter in full
working order. Checking the Chaff
Cutter regularly (checking that
screws are tight, checking for
cracks and damage) and changing damaged and worn parts,
helps prevent accidents and the
Chaff Cutter breaking down.
A
Ensure that all nuts, bolts and
screws are tight and that the
6. Correct Working with the Chaff Cutter
6.1 Notes on Safety
G
GARDENA Chaff Cutters are
suitable for cutting long, hard or
dried out flower stalks, herbaceous plants, bushes, shrubs
and tree cuttings.
If the feeding funnel / cutting
cylinder becomes blocked,
e.g. due to an excess of wet material the blockage can usually
be rectified by inserting branches
which you wish to cut into the
Chaff Cutter. Wet material should
therefore always be chopped in
the Chaff Cutter followed by
branches.
A collecting container (e.g.
sack or box etc.) must be emptied regularly to prevent the
chopped material blocking the
cutting cylinder if the container
is over-full.
mower is in good working order. For safety reasons, allow
all worn out and damaged parts
to be exchanged by GARDENA
Service or authorised specialist
dealers.
If the adjusting screw stops (may
not be turned to the right), then
the cutting plate is to be replaced
by the GARDENA Service.
Maintaining the Cutting Device
(Fig. C 1)
The cutting plate E is factory
pre-set subject to natural wear.
To prevent damage to the cylinder, the cutting plate must be
adjusted as soon as the material
being chopped is not completed
severed:
1. While the motor is running,
(green button on the main
switch B is pressed – up / down
switch is in position), loosen
the counter nut D using the
fork wrench (10 /13 mm) and
2. carefully turn the adjusting
screw C by hand to the right
until you can hear a slight
grinding noise and until fine
aluminium shavings fall briefly
from the ejection channel.
Important ! Never adjust when
in position.
3. Re-tighten the counter nut.
The material being chopped
is now severed completely.
A
7.2 Cleaning and Care
The Chaff Cutter must
only be cleaned and cared
for after the motor has been
turned off, when the cylinder
has stopped turning and the
mains plug has been removed
from the socket. To prevent injuries always wear protective
gloves.
To avoid injury to persons
and material damage: Never
clean your Chaff Cutter with
running water, in particular
with water under high pressure.
Immediately after you have finished using the Chaff Cutter,
where possible, remove dirt and
the remains of material which has
been chopped. Use a soft brush
or cloth. Wear protective gloves.
Danger of injury !
7.3 Storage
Always store your Chaff Cutter
in a dry, closed room.
8. Advice for Proper Use / Safety Instructions
A
Checks before each
Operation
Inspect the unit before each
use. Do not use the Chaff
Cutter if safety devices and / or
the cutting device are damaged
or worn. Never operate the
unit with the safety devices
by-passed or missing.
A
Proper Use /
Responsibility
This Chaff Cutter can cause
serious injuries !
You are responsible for the
safety of the working area.
Familiarise yourself with the
surroundings of your work-
ing area. Check for possible
risks which might be not
audible due to the noise of
the machine.
Only use the Chaff Cutter
for the purposes specified
in these instructions.
Make sure that there are
no other people (especially
children) or animals anywhere
near the working area.
Do not wear loose clothing,
jewellery etc. which could get
trapped in the Chaff Cutter.
Wear sturdy working shoes,
long trousers, gloves as well as
safety goggles and ear protec-
tion available from specialist
dealers.
Rotating tool ! The tool does
not stop immediately after you
have turned off the motor !
Danger of trapping fingers !
Ensure that you have a secure
foothold when working. Keep
the mains cable away from the
filling and ejection funnels.
To prevent damaging the
Chaff Cutter and to prevent
fires starting, keep the ventilation slits of the motor free
from particles of dirt.
15
G
The Chaff Cutter must not be
tilted or tipped when in operation.
Do not put stones, soil, glass,
textiles, plastics or metal parts
into the Chaff Cutter. These
materials will seriously damage
the cutting tool. There is also
the danger of being hit by material thrown back out of the
Chaff Cutter.
When the chaff cutter is
plugged in, never reach into
the ejection shaft / feeding
funnel. Danger of injury!
If foreign bodies fall into the
cylinder or if unusual sounds
or vibrations occur, switch off
the Chaff Cutter immediately
and wait until the cylinder has
stopped moving. Remove the
obstacle. Check the Chaff
Cutter for any damage / loose
parts and if necessary have
your chaff cutter repaired.
A
Interruptions of Work
Never leave the Chaff Cutter
unattended at the working area.
If you interrupt your work
store the unit in a safe place.
Disconnect the mains plug!
If you wish to move the Chaff
Cutter to another place, switch
off the motor, remove the plug
and wait until the cylinder
stops moving before moving
the Chaff Cutter.
A
Check the Environment
Never use the unit when it is
raining or in damp or wet areas.
Do not operate your Chaff
Cutter near swimming pools
or garden ponds.
Please observe the prescribed
local quiet times.
A
Electric Safety
The Chaff Cutter must only be
operated with undamaged electric cable. If the electric cable
or the extension cable is damaged disconnect the mains
plug immediately.
Check the power cable regularly for damage and signs
of wear and tear.
The socket of an extension
cable should be water-proof
or the connection sockets
for extension cables must be
made of rubber or be encased
in rubber according to DIN
VDE 0620.
Only use permitted extension
cables. Ask your electrician.
For portable units, which are
used outdoors, we recommend
to use a residual-current device having a residual-current
rating ≤ 30 mA.
In Switzerland use of a
residual-current device is
obligatory.
Possible cause
Remedy
Material to be chopped
is not severed sufficiently.
Cutting plate E not set correctly
at the cylinder.
Re-adjust the cutting plate E
as described in “Maintaining
the Cutting Cylinder”.
Abnormal sounds,
Chaff Cutter rattling.
Check whether the screws
are loose.
Tighten the screws. Check the
the device by GARDENA Service.
If you have any problem with
your Chaff Cutter, please contact
our Service, or return the defective unit together with a short
description of the problem and,
in case of guarantee, with a copy
of the receipt to one of the
GARDENA service centres listed
on the rear page.
exchange, other than original
GARDENA parts are used and
repair is not carried out by a
GARDENA service centre or
an authorised specialist.
The same also applies to spare
parts and accessories.
Problem
Possible cause
Remedy
Motor will not start.
Up / down switch set to
position 0.
Set the direction of rotation
switch to the desired position:
Material being cut is moved
upwards, e.g. if blocked
Chaff Cutter setting
Motor switches off.
Blockage protection activated
due to constant overload or
blockage at the cylinder.
The motor can be switched on
again after 5 minutes.
Chaff Cutter not accepting
material to be cut.
Aerator direction of rotation
is set incorrectly.
Move the direction of rotation
switch A to the correct position.
Collection container is over-full
(cylinder blocked).
Empty the collection container.
Turning direction has automatically changed due to blockage.
See chapter 5.6.
Cutting cylinder got stuck due
to too wet cutting material.
Use branches to eliminate
blockage. See chapter 6.2.
We expressly point out that,
according to the product liability law, we are not liable for
any damage caused by our
units if, in case of repair or
EU Certificate of Conformity
The undersigned
GARDENA Kress + Kastner GmbH · Hans-Lorenser-Str. 40 · D - 89079 Ulm
hereby certifies that, when leaving our factory, the units indicated below are in accordance with the
harmonised EU guidelines, EU standards of safety and product specific standards.
This certificate becomes void if the units are modified without our approval.
Description of the units:
Quiet Power Chaff Cutter
Types :
S 2000 S / S 2300 SP
9. Faults
16
G
Problem
Art. No.:
3980 / 3982
EU directives:
Machinery Directive 98 / 37/ EC
Electromagnetic Compatibility
89 / 336 / EC
Low Voltage Directive 73 / 23 / EC
Directive 93 / 68 / EC
Directive 2000 / 14 / EC
Harmonised European
standards:
EN 292 -1
EN 292 - 2
EN 60335 -1
Noise level :
measured / guaranteed
S 2000 S
95 / 96 dB (A)
S 2300 SP
95 / 97 dB (A)
Ulm, 09.11.2001
Thomas Heinl
Technical Dept. Manager
Year of CE marking:
1998
17
D
Garantie
GARDENA gewährt für dieses
Produkt die gesetzliche Garantie
(ab Kaufdatum). Diese Garantieleistung bezieht sich auf alle wesentlichen Mängel des Gerätes,
die nachweislich auf Materialoder Fabrikationsfehler zurückzuführen sind. Sie erfolgt durch
die Ersatzlieferung eines einwandfreien Gerätes oder durch
die kostenlose Reparatur des
eingesandten Gerätes nach unserer Wahl, wenn folgende Voraussetzungen gewährleistet sind:
.Das Gerät wurde sachgemäß
und laut den Empfehlungen
in der Gebrauchsanweisung
behandelt.
.Es wurde weder vom Käufer
noch von einem Dritten versucht, das Gerät zu reparieren.
.Die Verschleißteile Messerwerk
und Schneidplatte sind von
der Garantie ausgeschlossen.
Diese Hersteller-Garantie berührt
die gegenüber dem Händler /
Verkäufer bestehenden Gewährleistungsansprüche nicht.
Im Reklamationsfall schicken Sie
bitte das defekte Gerät zusammen mit einer Kopie des Kaufbelegs und einer Fehlerbeschreibung frankiert an die auf der
Rückseite angegebene Serviceadresse.
G
Guarantee
GARDENA honours the guarantee legally required for this product (starting from the date of
purchase). This guarantee covers
all serious defects of the unit
that can be proved to be material
or manufacturing faults. Under
warranty we will either replace
the unit or repair it free of charge
if the following conditions apply:
.The unit must have been
handled properly and in keeping with the requirements of
the operating instructions.
62
.Neither the purchaser or a
non-authorised third party have
attempted to repair the unit.
.The blade assembly and the
cutting plate are wearing parts
and are not covered by the
guarantee.
This manufacturer’s guarantee
does not affect the user’s existing warranty claims against the
dealer / seller.
In case of claim, please return
the faulty unit together with a copy
of the receipt and a description
of the fault, with postage paid to
one of the GARDENA Service
Centres listed on the back of
these operating instructions.
F
Garantie
GARDENA accorde pour cet appareil la garantie légale à compter du jour de l’achat. Elle est assurée par le remplacement gratuit
des pièces défectueuses ou de
l’appareil. Le choix en étant laissé
à la libre initiative de GARDENA.
En tout état de cause s’applique
la garantie légale couvrant toutes
les conséquences des défauts
ou vices cachés (article 1641 et
suivants du Code Civil).
Pour que ces garanties soient
valables, les conditions suivantes
doivent être remplies :
.L’appareil a été manipulé de
manière adéquate, suivant les
instructions du mode d’emploi.
.Il n’y a eu aucun essai de
réparation, ni par le client, ni
par un tiers.
.Le bloc de coupe et le support de coupe sont des pièces
d’usure et sont par conséquent exclus de la garantie.
Une intervention sous garantie
ne prolonge pas la durée initiale
de la garantie contractuelle.
Toutes les revendications dépassant le contenu de ce texte
ne sont pas couvertes par la
garantie, quel que soit le motif
de droit.
Pendant la période de garantie,
le Service Après-Vente et les
Centres SAV agréés effectueront, à titre payant, les réparations nécessaires par suite de
manipulations erronées.
En cas de réclamation, veuillez
envoyer le produit en port payé
avec le bon d’achat et une description du problème, à l’adresse
du Service Après-Vente figurant
au verso.
N
Garantie
GARDENA geeft op dit product
de wettelijke garantie (vanaf de
aankoopdatum). Deze garantie
heeft betrekking op alle wezenlijke defecten aan het toestel, die
aanwijsbaar op materiaal- of fabricagefouten berusten. Garantie
vindt plaats door de levering van
een vervangend apparaat of door
de gratis reparatie van het ingestuurde apparaat, naar onze
keuze, indien aan de volgende
voorwaarden is voldaan:
.Het apparaat werd vakkundig
en volgens de adviezen in de
gebruiksaanwijzing behandeld.
.Noch de koper, noch een
derde persoon heeft getracht
het apparaat te repareren.
.Het aan slijtage onderhevige
messenwerk en de snijplaat
vallen niet onder de garantie.
Deze garantie van de producent
heeft geen betrekking op de ten
aanzien van de handelaar / verkoper bestaande aansprakelijkheid.
In geval van reclamatie het defecte apparaat samen met de
kassabon en een beschrijving
van de storing gefrankeerd op
naar het op de achterzijde aangegeven serviceadres opsturen.
Finland
Habitec Oy
Martinkyläntie 52
01720 Vantaa
France
GARDENA France
Service Après-Vente
BP 50080
95948 ROISSY CDG Cedex
Great Britain
GARDENA UK Ltd.
27- 28 Brenkley Way
Blezard Business Park
Seaton Burn
Newcastle upon Tyne
NE13 6DS
Greece
Agrokip G. Psomadopoulos & Co.
20, Lykourgou str.
Kallithea - Athens
Hungary
GARDENA Magyarország Kft.
Késmárk utca 22
1158 Budapest
Iceland
Heimilistaeki hf
Saetun 8
P.O. Box 5340
125 Reykjavik
Republic of Ireland
Michael McLoughlin & Sons
Hardware Limited
Long Mile Road
Dublin 12
Italy
GARDENA Italia S.r.l.
Via Donizetti 22
20020 Lainate (Mi)
Japan
KAKUDAI Mfg. Co. Ltd.
1- 4 - 4, Itachibori Nishi-ku
Osaka 550
Luxembourg
Magasins Jules Neuberg
Grand Rue 30
Case Postale No. 12
Luxembourg 2010
Netherlands
GARDENA NEDERLAND B.V
Postbus 50176
1305 AD ALMERE
Neth. Antilles
Jonka Enterprises N.V.
Sta. Rosa Weg 196
P.O. Box 8200
Curaçao
New Zealand
NYLEX New Zealand Limited
Private Bag 94001
South Auckland Mail Centre
10 Offenhauser Drive
East Tamaki, Manukau
Norway
GARDENA Norge A / S
Postboks 214
2013 Skjetten
Poland
GARDENA Polska Sp. z o.o.
Szymanów 9 d
05 - 532 Baniocha
Portugal
MARKT (Portugal), Lda.
Recta da Granja do Marquês
Edif. GARDENA
Algueirão
2725-596 Mem Martins
Russia / Россия
АО АМИДА ТТЦ
ул. Моcфилмовcкая 66
117330 Моcква
Singapore
Variware
Holland Road Shopping Centre
227-A 1st Fl., Unit 29
Holland Avenue
Singapore 1027
Slowenia / Croatia
Silk d.o.o. Trgovina
Brodišče 15
1236 Trzin
South Africa
GARDENA South Africa (Pty.) Ltd.
P.O. Box 11534
Vorna Valley 1686
Spain
ANMI Andreu y Miriam S.A.
Calle Pere IV, 111
08018 Barcelona
Sweden
GARDENA Svenska AB
Box 9003
20039 Malmö
Switzerland
GARDENA Kress + Kastner AG
Bitziberg 1
8184 Bachenbülach
Ukraine / Украина
АОЗТ АЛЬЦЕСТ
ул. Гайдара 50
г. Киев 01033
Turkey
Dost Diþ Ticaret Mümessillik A.Þ.
Yeþilbaðlar Mah. Baþkent
Cad. No. 26
Pendik - Ýstanbul
USA
GARDENA
3085 Shawnee Drive
Winchester, VA 22604
3980 - 20.960.05 / 0011
GARDENA Kress + Kastner GmbH
Postfach 27 47, D - 89070 Ulm
http: //www.gardena.com
11450
Deutschland
GARDENA Kress + Kastner GmbH
GARDENA Service
Hans-Lorenser-Straße 40
D-89079 Ulm
Produktfragen: (07 31) 490 - 123
Reparaturen: (07 31) 490 - 290
Argentina
Argensem S.A.
Venezuela 1075
(1618) El Talar - Buenos Aires
Australia
NYLEX Corporation Ltd.
25 - 29 Nepean Highway
P.O. Box 68
Mentone, Victoria 3194
Austria
GARDENA Österreich Ges. m.b.H.
Stettnerweg 11-15
2100 Korneuburg
Belgium
MARKT (Belgium) NV/ SA
Sterrebeekstraat 163
1930 Zaventem
Brazil
M. Cassab
Av. das Nações Unidas, 20.882
Santo Amaro, CEP 04795-000
São Paulo - S.P.
Bulgaria / България
ДЕНЕКС ООД
бул. „Черни връх“ 43
София 1407
Canada
GARDENA Canada Ltd.
100, Summerlea Road
Brampton, Ontario
Canada L6T 4X3
Chile
Antonio Martinic Y CIA. LTDA.
Gilberto Fuenzalida 185 Loc.
Las Condes - Santiago de Chile
Costa Rica
Compania Exim
Euroiberoamericana S.A.
350 Sur del Automercado
Los Yoses
San Pedro
Cyprus
FARMOKIPIKI LTD
P.O. Box 7098
74, Digeni Akrita Ave.
1641 Nicosia
Czech Republic
GARDENA spol. s.r.o.
Řipská 20
62700 Brno
Denmark
GARDENA Danmark A / S
Naverland 8
2600 Glostrup
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising