Sliding Gate, Swing Gate and Vehicle Barrier Operators
Sliding Gate, Swing Gate
and Vehicle Barrier Operators
Sliding
Gate
Operators
600
500
Designed for
residential sliding
gates, up to 300 kg
Designed for
residential sliding
gates, up to 500 kg
Designed for
high-traffic sliding
gates, up to 500 kg
Designed for
high-traffic sliding
gates, up to 1000 kg
Features:
• COST EFFECTIVE residential
sliding gate automation
• TOUGH DC MOTOR with
removable brushes for easy
maintenance
• LED DISPLAY for easy
programming and diagnostics
• SECURITY:
• Gate and safety beam
tamper alarm monitoring
• Electronic locking of motor
unit with remote control for
added security
• ET-Blu Mix® enhanced rolling
code receiver on board
Features:
• PROVEN robust and reliable
residential slide gate automation
• HIGH SPEED motor with
removable brushes
• ADVANCED ELECTRONICS
with large backlit display for easy
programming, diagnostics and
fault reporting
• SECURITY:
• Gate and beam
tamper alarm monitoring
• Pin code lockable programming
• Optional heavy duty security
bracket
• ET-Blu Mix® enhanced rolling
code receiver on board
Features:
• PROVEN POWER PACK for hightraffic applications with true
battery backup
• HIGH SPEED motor with
removable brushes
• ADVANCED ELECTRONICS
with large backlit display for easy
programming, diagnostics and
fault reporting
• SECURITY:
• Gate and safety beam tamper
alarm monitoring
• Pin code lockable programming
• Optional heavy duty security
bracket
• ET-Blu Mix® enhanced rolling
code receiver on board
Features:
• HEAVY DUTY robust design for
high-traffic industrial sliding gate
automation
• Proven POWER PACK operation
with true battery backup
• HIGH SPEED motor with
intelligent control
• ADVANCED ELECTRONICS with
large backlit display for easy
programming, diagnostics and
fault reporting
• Designed to house up to two 24V
3.5Ah batteries for extra internal
battery backup
• SECURITY:
• Gate motor and beam
tamper alarm monitoring
• Optional heavy duty security
bracket
• ET-Blu Mix® enhanced rolling
code receiver on board
Technical specification
DRIVE 300
DRIVE 500
DRIVE 600
DRIVE 1000
Input voltage: (Standard kit option)
230v AC, 50Hz-60Hz
16v or 230v AC, 50Hz-60Hz
230v AC, 50Hz-60Hz
230v AC, 50Hz-60Hz
Primary supply to the electric motor:
Battery dependent (24V 3,5Ah)
Battery dependent (12V 7,5Ah)
ACDC Power Pack with battery as
back-up only (12V 7,5Ah)
ACDC Power Pack with battery as
back-up only (24V 5Ah)
Maximum duty cycle with mains
present:
25%*
25%*
98%*
98%*
Number of operations on battery
reserve without AC mains present:
100 within the first 24h of power
failure**
100 within the first 24h of power
failure**
100 within the first 24h of power
failure**
100 within the first 24h of power
failure**
Maximum gate mass:
300kg
500kg
500kg
1000kg
Maximum gate leaf length:
25m
35m
35m
40m
Rated running load:
100N**
180N**
180N
400N
Rated gate speed:
25m/min†
28m/min†
30m/min†
28m/min†
Built-in receiver:
434MHz, 4 channel, ET BLU MIX®
Enhanced rolling code. 32 user
capacity
434MHz, 4 channel, ET BLU MIX®
Enhanced rolling code. 250 user
capacity
434MHz, 4 channel, ET BLU MIX®
Enhanced rolling code. 250 user
capacity
434MHz, 4 channel, ET BLU MIX®
Enhanced rolling code. 1000 user
capacity
UV protection
* At rated gate running load. ** Battery charge level and health dependent. † Dependent on factors such as battery status, gate load, mains voltage, environment etc • Technical specifications subject to change
For more information about these products,
scan these QR Codes with your smart phone.
Swing
Gate
Operators
24V Wingo and
Toona Control Unit
WINGO
TOONA 5
Designed for residential swing gates, with
gate leaves of up to 3.5m each
Designed for residential and industrial swing
gates, with gate leaves of up to 5m each
Features:
• HI-SPEED operator for swing gate leaves up to 3.5m
• ROBUST cast aluminium design with powder coating
• LOW NOISE operation
• Proven POWER PACK operation with true battery
backup
• LED DISPLAY for easy programming and diagnostics
• Magnetic encoder ensures reliable and precise
obstacle detection
• ET-Blu Mix® enhanced rolling code receiver on-board
Features:
• POWERFUL operator for swing gate leaves up to 5m
• ROBUST cast aluminium design with powder coating
• Proven POWER PACK operation with true battery backup
• LED DISPLAY for easy programming and diagnostics
• Magnetic encoder ensures reliable and precise obstacle detection
• Easy installation, operation and maintenance
• ET-Blu Mix® enhanced rolling code receiver on-board
Technical specification
WINGO
TOONA 5
Input voltage: (Standard kit option)
230v AC, 50Hz-60Hz
230v AC, 50Hz-60Hz
Primary supply to the electric motor:
ACDC Power Pack with battery as back-up only (24V, 3.5Ah)
ACDC Power Pack with battery as back-up only (24V, 3.5Ah)
Maximum work cycle with mains present:
30 Cycles/hour*
95 Cycles/hour*
Number of operations on battery reserve
without AC mains present:
100 within the first 24h of power failure**
100 within the first 24h of power failure**
Rated gate mass:
500kg***
600kg***
Maximum gate leaf length:
3.5m***
5m***
Rated traveler load:
1500N
1800N
Rated gate speed:
90˚ in <10 seconds†
90˚ in <35 seconds†
Built-in receiver:
434MHz, 4 channel, ET BLU MIX® Enhanced rolling code. 64 user standard
capacity.
434MHz, 4 channel, ET BLU MIX® Enhanced rolling code. 64 user standard
capacity.
* At rated gate running load. ** Battery charge level and health dependent. ***The longer the gate leaf, the lower the gate mass needs to be.(see installation manual for details) † Dependent on factors such as battery status, gate load, mains voltage, environment etc.
• Technical specifications subject to change
Gate
Motor
Accessories
ET-Blu Mix
Rolling Code
Transmitters
Blue i
Safety Beams
MD2010
Metal Loop
Detector
E-Pad O2
Wireless Access
Control Keypad
Solemyo
24v Solar Kit
Wingo & Toona
999 User SMXI Receiver
1 km
Intercom
Internal and
external Kit
Steel or
Nylon Rack
Drive 1000
Heavy Duty Security
Bracket*
*Heavy Duty Security Brackets and Locks are an optional extra and are not included in the kit
Drive 500 / Drive 600
Heavy Duty Security
Bracket*
ET-Blu Mix
Long Range
Transmitter/Receiver
equipment
Vehicle
Barriers
Fixed
Barrier Fence
180˚ Jack-knife
Multi-functional
Access Blue AC1-U
control card
For more information about these products,
scan this QR Code with your smart phone.
Features:
HEAVY DUTY cast gearbox assembly • DUAL LIMITS for added safety • POWERFUL 650 Watt AC motor
Simplex or complex mode option • Removable control card housing for easy access
Technical specification
FIXED POLE
FIXED POLE HIGH SPEED
180˚ JACK-KNIFE
MONO-LAYER FENCE
Input voltage:
230v AC, 50Hz-60Hz
230v AC, 50Hz-60Hz
230v AC, 50Hz-60Hz
230v AC, 50Hz-60Hz
Rated work cycle:
420/hr
420/hr
420/hr
420/hr
Motor power::
230v AC 650W
230v AC 650W
230v AC 650W
230v AC 650W
Maximum pole length:
6m
3m
3.1m (In closed position)
5m
Rated opening speed:
4.5 seconds
1.2 seconds
4.5 seconds
4.5 seconds
Vehicle
Barrier
Accessories
1 km
ET-Blu Mix
Rolling Code
Transmitters
ET-Blu Mix
Rolling Code
Receivers
MD2010
Metal Loop
Detector
Blue i
Safety Beams
Proudly designed,
manufactured and
supported by:
ET Nice (Pty) Ltd
South Africa
Sharecall: 0860 109 238 • www.et.co.za
E-Pad O2
Wireless Access
Control Keypad
ET-Blu Mix
Long Range
Transmitter/Receiver
equipment
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising