VBM L50C 211 2219-9504.id - Volvo Construction Equipment

VBM L50C 211 2219-9504.id - Volvo Construction Equipment
MIE Volvo BM L50C
* Engine output SAE J1349:
Alt. 1 Low emission engine
gross 74,5 kW (101 hp)
net 71,0 kW (97 hp)
Alt. 2 gross 71,5 kW (96 hp)
net 68,0 kW (91 hp)
* Operating weight: 7,8-9,0 t
* Buckets: 1,2-3,9 m*
* Torque Parallel Linkage
— high breakout torque through-
out the working range
— excellent parallel lift-arm action
— high lift height and long reach
e Direct injection turbocharged
diesel engine
e Hydrostatic transmission with
kick-down function
* Fully sealed oil-circulation
cooled wet disc brakes, out-
board mounted
* Care Cab — pressurized cab
with high comfort and safety
es [ oad-sensing hydraulic
system — working and steering
hydraulics
* Pilot-operated working
hydraulics
* Optional equipment
- Hydraulic attachment bracket
- Boom Suspension System
— Contronic monitoring system
VOLVO BM
=) SERVICE REFILL CAPACITIES
Contronic monitoring system™ provides information on
machine condition, routine maintenance schedules and
minimizes time required for troubleshooting.(* Option)
Service accessibility: Large, easy-to-open engine
access doors with gas struts. Radiator easy to
clean.
Capacities
Fuel tank 1701 Gearbox 71
Engine coolant 221 Engine oil 11 |
Hydraulic tank 651 Axle front/rear 22/22 |
ENGINE
Engine delivers high torque and quick response at low
rom even under full load. The machine can work at low
engine speeds, which contributes to good fuel economy,
less noise, less wear and longer life.
Engine: VME TD 40 KAE" / TD 40 GA™, 4-cylinder, in-line,
direct-injected, turbocharged 4-stroke (* low emission)
diesel engine with dry replaceable cylinder liners.
Air cleaning: three-stage.
Engine TD 40 KAE* TD 40 GA**
Flywheel outputat r/s (r/min) 36,6 (2200) 36,6 (2200)
SAE J1349 gross kW (hp) 74,5 (101) 71,5 (96)
net kW (hp) 71,0 (97) 68 (91)
Max. torque at r/s (r/min) 23,3 (1400) 23,3 (1400)
SAE J1349 gross Nm 390 373
net Nm 380 363
Displacement | 4,0 4,0
Hm Torque
450
200
ЗЫ]
300
250
800 1000 1200 1400 1600 1800 2000 2200 r/min Engine speed
Ñ I Ë [I
Ws ("Al 1, ** Alt. 2)
= ELECTRICAL SYSTEM
The electrical system is built up around a distribution
box and includes the following functions: Kick-down,
downshift protection and central warning.
15 20 25 30 35
Central warning: Central warning lamp for the
following functions: engine oil pressure, engine
coolant temperature, hydrostatic charge pressure,
hydrostatic oil temperature, gearbox oil pressure,
brake pressure, parking brake (buzzer).
The Contronic monitoring system can be selected
as optional equipment.
Voltage 24 V
Batteries 2x12 V
Battery capacity 2x105 Ah
Cold cranking capacity, ea 690 A
Reserve capacity, ea 185 min
Alternator rating 1680 W/60 A
Starter-motor output 6 kW (8 hp)
fe] DRIVETRAIN
Drivetrain and working hydraulics well-matched to each
other. Dependable design. Quick acceleration boosts
productivity.
Hydrostatic transmission: The transmission consists
of a hydraulic pump, hydraulic motor (both with
variable displacement) and a two-stage VME Power
Shift gearbox which is actuated via a kick-down
function.
Axles: Volvo BM, fully floating axle shafts with planetary-
type hub reductions. Cast-steel axle housing. Fixed
front axle and oscillating rear axle. 100% differential
lock on front axle (option).
Speeds, Low range High range
max forward/reverse 0-18 km/h 0-39 km/h
locked max displacement 0-5 km/h 0-11 km/h
Measured with tires 15.5R25
Front and rear axle Volvo BM / AWB 10
Oscillation, rear axle +12 °
Ground clearance at
13° oscillation 365 mm
BRAKE SYSTEM
Simple, reliable system with few parts ensures high
availability and safety. Self-adjusting internal oil
circulation-cooled disc brakes give long service
intervals.
Service brakes: Volvo BM, dual-circuit system with
nitrogen-charged accumulators. Fully hydraulically
operated enclosed internal oil circulation-cooled
disc brakes.
Parking brake: Mechanically operated drum brake on
front axle input shaft.
Secondary brake: Either of the service brake circuits
or the parking brake fullfills the safety requirements.
Standards: The brake system complies with the
requirements of ISO 3450, SAE J1473
Number of discs/wheel 1
Number of accumulators 3
Volume, each 0,51
| > seemmessem |
Low-effort steering gives short work cycle times.
Power-efficient system provides good fuel economy,
good directional stability and smooth ride.
Steering system: Load-sensing hydrostatic
articulated steering.
System supply: The steering system has prioritized
feed from the machine’s load-sensing axial piston
pump.
Pump: Variable-flow axial piston pump.
Cylinders: Two double-acting cylinders.
Steering cylinders 2
Bore 63 mm
Piston rod diameter 40 mm
Stroke 320 mm
Relief pressure 21 MPa
Articulation + 40°
CAB
Care Cab with easy entry and wide door opening.
Lined with sound-absorbent material. Sound- and
vibration-suppressing suspension. Good all-round
visibility, large glass areas. Curved windshield of
laminated, green-tinted glass. Ergonomically located
controls and instruments permit a comfortable
operating position.
Instrumentation: All information important to the
operator is readily visible in front of him. Cab
display for Contronic monitoring system (option).
Heater and defroster: Heating element with filtered
fresh air and four-speed fan. Defroster outlets for all
windows.
Operator's seat: Spring suspended, adjustable
operator’s seat with belt. The seat is mounted on a
bracket on the rear wall. The force from the belt is
absorbed by the seat rails.
Standards: Tested and approved according to the
following standards: ROPS (ISO/CD 3471, SAE
J1040), FOPS (ISO 3449, SAE J231). Complies with
"Overhead guards for rider lift trucks” (ISO 6055)
and "Operator Restraint System” (SAE J386).
Emergency exits 2
Sound level in cab
as per ISO 6396,
max fan position 72 dB (A)
fan position 2 70 dB (A)
Ventilation 10 m*/min
Heating capacity 11 kW (37 500 Btu/h)
Air conditioning (optional) 8 kW (27 300 Btu/h)
Load-sensing hydraulics distribute exactly the quantity
of oil required for the function used. Load-sensing gives
precise control of the hydraulics throughout the lifting
range. High pump capacity provides quick movements.
Pump: The load-sensing axial piston pump adjusts the
oil requirements of the function used via indication
through a load-sensing line. The flow is directed to
the function used via a central valve block. Steering
function always has priority.
Valve: Double-acting 2-spool valve. The control valve
is actuated by a 2-spool pilot valve.
Lift function: The valve has four functions: raise, hold,
lower and float. Inductive/magnetic automatic boom
kickout (option) can be switched on and off and is
adjustable to any position between maximum reach
and full lift height.
Tilt function: The valve has three functions: rollback,
hold and dump. Inductive/magnetic automatic
bucket positioner, that can be switched on and off
(option).
Cylinders: Double-acting
Filter: Full-flow filtration through 10 um (absolute) filter
cartridge.
Axial piston pump
Relief pressure 26,0 MPa
Flow 120 l/min
at 10 MPa
and engine speed 36,7 r/s (2 200 r/min)
Pilot system
Relief pressure 3,0 MPa
Cycle times
Raise” 54s
Dump* 1,18
Lower, empty 30s
Total cycle time 95s
* with load as per ISO 5998 and
SAE J818
Ng LIFT-ARM SYSTEM
TP Linkage combines high break-out torque throughout
the working range with nearly exact parallel lift-arm
action. These features together with high lift height and
long reach make the lift-arm system equally as good in
bucket loading as in work with fork attachments and
material handling arms.
Lift cylinder 2
Bore 100 mm
Piston rod diameter 70 mm
Stroke 669 mm
Tilt cylinder 1
Bore 125 mm
Piston rod diameter 70 mm
Stroke 434 mm
OPERATIONAL DATA
TYPE OF APPLICATION GENERAL PURPOSE LIGHT MATERIAL
meses, № О А А ТР А €
and counterweight 1 _ | | | | | |
Volume, heaped mi | - - 1,4 1,4 1,4 | 1,4 1,2 1,2 2,1 -
incl. bolt-on
cutting edge m3 | 1,5 1,5 a = то = = = (2,2) 3,9
Shen a oad, kg | 5480 | 5210 5640 | 5600 | 5360 | 5320 | 5650 | 5380 | 5040 4 580
at 35° turn kg 4 890 4 640 5 050 5010 4 780 4 740 5 070 4 810 4 480 4 040
at full turn kg 4720 4 460 4 870 4 840 4 610 4 570 4 890 4 630 4 320 3 880
Breakout force kN 64,4 9,7 68,1 68,1 62,9 62,9 72,7 66,8 49,2 36,8
A mm | 6320 6 400 6 240 6 420 6 320 6 490 6 350 6 430 6 570 7 040
| |
Е mm | 930 1000 870 870 940 940 810 880 1 200 1 640
| |
H mm | 2810 2 760 2 860 2 750 2 810 2 700 2790 | 2740 2 630 2 310
L mm 4770 4 730 4 770 4 770 4 730 4 810 4 720 4 710 4 910 5370
M mm 990 1 040 960 1 090 1 010 1 150 1 050 1 100 1 200 1 500
N mm 1 540 1 560 1 540 1610 1 560 1 630 | 1590 1610 1 600 1 640
V mm | 2300 2 300 2 300 2 300 2300 | 2300 2300 | 2300 | 2380 2 500
a, clearance circle mm | 10 770 | 10 810 10730 | 10870 | 10770 | 10910 | 10830 | 10880 | 11000 11 400
Operating weight kg | 8140 8 280 8 060 8080 8200 8 240 8 060 8210 | 8310 8 560
Product no 92190 92170 92190 92482 92170 92481 92189 92169 92315 92316
The volume handled varies with the bucket fill and is
often greater than indicated by the bucket’s ISO/SAE
volume. The table shows optimum bucket choice
with regard to the material density. edit Material density Um?
1,3 1,4 1,5 1.6 Li 18 1.9
1,2 M*/ 1.6 yd3 H |
Material m? Bucket fill % Density Ут TAS
Earth 100-115 1,4-1,6 1,4 m3/1.95 yd3 H |
Clay 110-120 1,4-1,6 1.5m 71.95 yds H Fi
Sand 100-110 6-1,9 - т | | | | |
= 110 100% 05% 2190 2360 2530 2700 2870 3035 3200 13380
Gravel 100-110 7-19 : me Material density Ib/yd?
Rock 75-100 5-1,9
| Tires
| 17.5R25*L2 600-26.5 Counterweight 2 | Excl counterweight 1| Extended fenders
Width over tires mm | +55 + 280 = = т
Ground clearance mm + 35 +20 - - =
Operating weight kg | +165 +120 + 300 - 150 + 150
Buckets
Tipping load, full turn kg + 90 - 20 + 460 — 235 + 173
|
Counterweight 1 may be used in rehandling, pallet and material arms
operations.
Counterweight 2, and combinations of counterweight 1 and 2, may be
used within pallet and material handling arms operations for stabilizing
purposes on firm and level ground.
Counterweight 2 replaces hydroinflation of rear tires and must never
be combined with tire chains. Counterweight 2 is not allowed in
combination with 17.5-25 tires.
OPERATIONAL DATA & DIMENSIONS
Н . * i Where applicable, specifications and
Tires: 15.5R25*L2 and counterweight 1 AST OR WR SO ET,
5 220 mm SAE J732, ISO 7546, SAE J742, ISO 5998,
2 750 mm SAE J818, ISO 8513.
380 mm
3 020 mm
2 135 mm
3 470 mm
3 710 mm
52°
45 *
44 *
49 *
90 *
80 mm
390 mm
1750 mm
2 140 mm
2 990 mm
4 850 mm
2 710 mm
+40 *
MNMAXCAÄAMODDDOX- 1000
il
m
o
o
tad
в
de
* Carry position SAE
MATERIAL HANDLING ARM (HOOK ON)
Tires: 15.5R25*L2 and counterweight 1
Order no. 92007
Operating weight 8 110 kg
A 1120 kg
B 890 kg
C 720 kg
D 2910 mm
E 2260 mm
F 1670 mm
G 3320 mm
H 4360 mm
| 5490 mm
J 1850 mm
К 2 580 mm
Е 3380 mm
M 1780 mm
N 2510 mm
O 3310 mm
P 1440 mm
Q 5040 mm
R 5890 mm
S 6820 mm
PALLET FORK (HOOK ON)
Tires: 15.5R25*L2 and counterweight 1
Fork tine order no. (per tine) 97789
Length 1225 mm
Fork frame order no. 91177
Width 1 500 mm
Rated operating load* 2 725 kg
at load center distance 600 mm
Operating weight 8 110 kg
“acc. sid EN 474-3, firm and level ground
820 mm
1590 mm
O mm
1750 mm
3 550 mm
750 mm
TMUOWF
Engine
Low emission engine
VME TD 40 KAE
Air cleaner, dry type,
dual element, exhaust
aspirated precleaner
Coolant level, sight gauge
Muffler, spark arresting
Pre-heater, thermostat
Electrical System
24V — prewired for optional
accessories
Alternator, 24V, 60 A
Battery disconnect switch
Fuel gauge
Hourmeter
Horn, electric
Instrument panel with symbols
Lights:
* driving (2-Front), halogen
with high/low beam
* parking lights
* stop/tail combination
(2 rear)
* turn signals with hazard
warning switch
« working lights, halogen
( 2 rear)
* instrument lightning
Neutral start feature
Service and maintenance
Tool box, lockable
Tool kit
Wheelnut wrench kit
Engine
VME TD40 GA
Cold starting aid, engine
coolant pre-heater (120V/1500 W)
or (240V/ 1500 W)
Coolant filter
Pre-cleaner, oil bath
Electrical system
Working lights front, on cab
Working lights front, extra
Working lights rear, extra
Rotating beacon, amber with
collapsible mount
Reverse alarm (SAE J994)
Contronic electrical system
Contronic display
Drivetrain
Forward and reverse switch
100% differential lock, front axle
Speed control, inch
Speed limiter, 20 km/h or 30 km/h
STANDARD EQUIPMENT
Warning & monitoring lights:
engine oil pressure
engine coolant temperature
air cleaner restriction
alternator malfunction
working lights
high beam driving lights
direction indicator, hazard
hydrostatic charge pressure
hydrostatic oil temperature
gearbox oil pressure
brake system pressure
* parking brake applied
* hydraulic oil level
Central warning (with buzzer):
engine oil pressure
engine coolant temperature
hydrostatic charge pressure
hydrostatic oil temperature
gearbox oil pressure
brake system pressure
parking brake applied and
transmission in forward or
reverse (buzzer)
* hydraulic oil level
е ее еее
Drivetrain
Hydrostatic transmission
Tires 15.5R25"L2
Cab
Installation kit for radio
Hand throttle
Sliding ventilation window
Speedometer
Air suspended operator's seat
Retractable seat belt
Air conditioner 8 kW,
27 300 Btu/h
Heated operators seat
Exterior rearview mirrors, 2
Windshield wiper, rear
Windshield washer, front & rear
Intermittent wiper, front
Adjustable steering wheel,
telescopic & tiltable
Noise reduction kit
Hydraulic system
Hydraulic control, 3rd function
Hydraulic control, 4th function
Bucket lever detent
Bucket leveler, automatic with
position indicator, adjustable
boom lever detents
Boom kickout, automatic,
adjustable
Under our policy of continuous product improvement, we reserve the right to change
specifications and design without prior notice. The illustrations do not necessarily show the
standard version of the machine.
VME Industries Sweden AB
S-631 85 ESKILSTUNA SWEDEN
Brake System
Wet, internal oil circulation cooled
disc brakes, 4-wheel, dual circuit
brake system
Secondary brake system,
accumulator supplied
Parking brake alarm
Cab
ROPS (SAE J1040CC) (ISO 3471),
FOPS (SAE J 231) (ISO 3449).
Acoustical lining
Ashtray
Cigarette lighter
Door lockable (left side access)
Heater/defroster/pressurizer
11 kW 37500 Btu/h with four
speed blower fan
Filtered air
Floor mat
Interior light
Interior rearview mirror
Openable window, right-hand
side
Safety glass, tinted
Seat belt (SAE J386)
Seat, ergonomically designed,
suspension adjustable
Storage compartment
Sun visor
Cab access steps and handrails
Dual service brake pedals
Hydraulic single acting lifting
function
Boom Suspension System
Biodegradable hydraulic fluid
External equipment
Mudguards
Mudguards extended
Counterweight 1, 150 kg
Counterweight 2, 300 kg
Drawbar with pin
Other equipment
Comfort Drive Control (CDC)
Slow moving vehicle emblem
Attachment bracket with
separate locking system
External noise reduction kit
Secondary steering
Tires
155-2512 17.5-25 L2
15.5R25" 17.5R25"
600-26.5 Twin
Hydraulic System
Main valve, 2-Spool,
Pilot operated
Pilot valve, 2-spool
Axial piston pump
Hydraulic control lever safety
latch
Boom lowering system
Hydraulic pressure test ports,
Quick connect
Hydraulic fluid level, sight gauge
Hydraulic oil cooler
External Equipment
Isolation mounts: cab, engine,
gearbox
Lifting lugs
Side panels, engine hood
Steering frame lock
Vandalism lock, provison for:
batteries, engine oil
OPTIONAL EQUIPMENT (May be standard in certain markets)
Protective equipment
Protective guards for front
running light
Protective guards for rear
working lights
Protective guards for rear
lights
Anti-vandalism equipment
Cover plate under cab
Attachments
Buckets
Fork equipment
Material handling arm
Timber grapples
Diagonal snow blade
Broom
Cutting edge, 3 pc reversible,
bolt-on
Bucket teeth, bolt-on
Bucket spillguard
Bale clamp
Drum rotator
Attachment rib kit
Ref. No. 21 1 669 2219 English
Printed in Sweden 04.95-4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising