Flyer Merkur X48 and X72
Merkur X48 and X72
High Pressure Airless Sprayers for Protective Coatings
Enjoy the power and portability needed for smaller jobs
•Portable and lightweight – easy to move around the job site
•Powerful – sprays medium to high solids coating materials at pressures up to 7200 psi (500 bar)
•Affordable – get high quality results wth minimal investment
•Flexible – ideal for a wide range of applications, including marine, rail and steel fabricationn
•The perfect complement to larger Graco Xtreme Sprayers
Ideal for high solids coatings
Ordering Information
Complete package includes XTR gun with 519 tip and
3/8 in x 25 ft (7.6 m) hose, 6 ft (1.8 m) whip
16V174Merkur X72 bare unit
16U918Merkur X72 complete package
16V175Merkur X48 bare unit
16U920Merkur X48 complete package
16U924Repair kit, X72 fluid section
16U925Repair kit, X48 fluid section
16V583Fluid filter kit, 7250 psi (500 bar)
for X48 or X72. Includes 60 mesh
filter element
224459 60 mesh fluid filter element, 2-pack
224468 100 mesh fluid filter element, 2-pack
106149Air line filter kit, 1/2 in npt (fbe),
20 micron (requires fittings)
24A576 Optional DataTrak Kit
The Merkur X48 and X72 single component airless sprayers offer the ultimate combination
of power and portability, giving you the ability to spray tough materials in the most
challenging situations. Weighing just 99 pounds (45 kg), the Merkur Sprayer can
easily be positioned in tight areas, without sacrificing spray quality or power.
Technical Specifications
Merkur X48
Maximum fluid working pressure
4800 psi (330 bar, 33 MPa)
Recommended tip size*
Up to 0.025
Fluid flow at 60 cycles/min
1.2 gpm (4.5 lpm)
Maximum air inlet pressure
100 psi (7 bar, 0.7 MPa)
Fluid inlet size
1-1/4 in npt(m)
Fluid outlet size
3/8 in npt(f)
Pump weight
99 lb (45 kg)
Spray Gun
XTR504 (0.019 tip)
* Varies by coating and duty cycle
High Pressure
• With up to 7200 psi (500 bar, 50 MPa)
• Sprays high solids coatings
• Supports longer hose runs
Easy to Maintain
• E asy to disassemble pump from air motor
Throat and Piston Packings
• S elf-adjusting and spring loaded
to maintain packing life
Pressure Bleed Valve
• Floating ball design
• Reduces clogging and leaking
Merkur Pump Lower
Contact us today!
For more product information, call
877-844-7226 or visit us online at
• Improved handling of high viscosity coatings
• Long-lasting Chromex coated rod
• S mooth 1-1/4 in inlet reduces “dead spots”
and coating buildup
Quick knock-off suction hose
• Large 1 in x 6 ft (25.4 mm x 1.8 m) suction hose
©2013 Graco Inc. 348913 Rev. A 03/13 All other brand names or marks are
used for identification purposes and are trademarks of their respective owners.
All written and visual data contained in this document are based on the latest
product information available at the time of publication. Graco reserves the right
to make changes at any time without notice.
Lightweight and portable
eighs only 99 lb (45 kg)
Merkur X72
7200 psi (500 bar, 50 MPa)
Up to 0.021
0.8 gpm (3.0 lpm)
100 psi (7 bar, 0.7 MPa)
1-1/4 in npt(m)
3/8 in npt(f)
99 lb (45 kg)
XTR704 (0.019 tip)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF