product catalog

product catalog
PRODUCT CATALOG
MADE IN SWEDEN
At the beginning of the 1990s Kalevi
Joentakanen started production of Nailing
Machines in the little town of Kopparberg
in Örebro, Sweden. It all began as a modest
small Business which gradually grew into a
larger scale as Kalevis sons Mattias and
Ingemar joined the company. In the year of
2001 IM Hart produced several Machine
Series and larger Machines Lines.
In 2010 The industrial group Profura acquired
a minority share of the company and the
decision to invest in further growth of the
company was taken.
Today IM Hart is a leading player in the
market for Nailing Machine Solutions. Our
flexible Pallet Nailing Machines are available
in most parts of the European Markets.
Now we set our sights on other parts
of the World.
Welcome to IM Hart
CONTENT
MACHINE SERIE 1000
Separate standing machines
MACHINE SERIE 1500
Standard lines
MACHINE SERIE 2000
Stringer and perimeter lines
MACHINE SERIE 2500
Special size machines
MACHINE LINE OVERVIEW
3
“OUR
MISSION IS TO
MANUFACTURE, DEVELOP
AND MARKET STANDARDIZED NAILING MACHINES
AND PRODUCTION LINES
WITH THE HIGHEST QUALITY
FOR THE PALLET INDUSTRY
THROUGHOUT THE WORLD”
4
MACHINE SERIE 1000
Separate standing
machines
5
MACHINE SERIE 1000
KOMBI-FLEX R-1000EL
Standardized, flexible, electronic
pallet nailing machine
R-1000EL IS A FLEXIBLE PALLET PRODUCER
Within just a few minutes, adjustment is done, changing to a new
type of pallet. R-1000EL is also possible to upgrade within the
R-1000 system, R-1000 Type2 and Assembly machine SMS-1000.
TWO OPERATORS FEED ONE FIXTURE EACH.
Feed the R-1000 manual with blocks
and boards in the left fixture. Put in the
ready left legs in the right assembly
fixture, and finally put all deck components on the top. R-1000 nails together
three legs and one complete pallet at
MACHINE SERIE 1000
the same time. IM Hart has various
additional machinery that can be easily
docked on to other machines and still
preserve the flexibility of the sizes and
varieties of pallets that go through the
machines.
SPECIFICATION MACHINE
MACHINE SPECIFICATION FACTS.
STANDARD PERFORMANCE
IM Hart machine deliveries. All machines are delivered according to CE Certification and complete documentation for Electricity and
pneumatics all according to European standard.
Operators
2
Length
3,5m
Width
2,5m excluding platform ladder
Height
3,6m
Power
7,5kw 35A ,3x400V
Pneumatic system
7 bar compressed dried air: 300 L/min
Should be filled and controlled
Container for lubricating oil, Compressor not included
Machine capacity time
14 seconds to complete 1 pallet (800x1200) Do not include operator loading of matrix. 550 pallets/8h shift.
Standard equipment performance
1 ea .Channels Legs
1 ea .Pallet assembly channel
1 ea. Pallet Matrix interchangeable
1 ea. Leg Matrix adjustable
Operators terminal for production control
Program for saving nail positioning
Nailing system
Mechanic, Electronic beam nailing , 3 ea. nail boxes , 30 ea. Nailing hammerheads
SPECIFICATION MATERIAL
MATRIX MATERIAL: BLOCKS
HEIGHT
Material
6
WIDTH
Solid wood or pressed blocks
Dimension
70-100 mm
75-150 mm
MATRIX MATERIAL: LEG BOARDS
MINIMUM
MAXIMUM
Length
600 mm
1 600 mm
Width
75 mm
150 mm
Thickness
16 mm
28 mm
MATRIX MATERIAL: STRINGER BOARDS
MINIMUM
MAXIMUM
Length
600 mm
1 300 mm
Width
75 mm
150 mm
Thickness
16 mm
28 mm
MATRIX MATERIAL: DECK BOARDS
MINIMUM
MAXIMUM
Length
600 mm
1 600 mm
Width
75 mm
150 mm
Thickness
16 mm
28 mm
PALLET SIZE
MINIMUM
MAXIMUM
Length deck & legs
600 mm
1 600 mm
Width deck
600 mm
1 300 mm
max 360mm/3 Legs
7
MACHINE SERIE 1000
DECK MACHINE D-1000EL
Standardized, flexible, electronic deck
nailing machine. Easy to adjust, open
for various deck sizes
ONE OPERATOR MANAGE THE D-1000EL
Feed the magazines with deck boards
and stringer boards. The electronic operation puts the boards in nailing position.
By using electronic beam nailing system
D-1000EL will nail the decks together with a capacity of twenty five (32)
MACHINE SERIE 1000
boards per minute. D-1000EL is a reliable machine, for production of pallet
decks. Reliable construction, for continuous use. Professional precision combined
with the easy way to handle and adjust
to a new deck size.
SPECIFICATION MACHINE
MACHINE SPECIFICATION FACTS.
STANDARD PERFORMANCE
IM Hart machine deliveries. All machines are delivered according to CE Certification and complete
documentation for Electricity and pneumatics all according to European standard.
Operators
1
Length
4,0m
Width
3m excluding platform ladder
Height
3,6m
Power
7,5kw 40A ,3x400V+N
Pneumatic system
7 bar compressed dried air: 400 L/min
Should be filled and controlled
Container for lubricating oil, Compressor not included
Machine capacity time
32 deck boards/min. 4 decks with ea. 8 deck boards (800x1200)
Standard equipment performance
2 ea. Cassettes for deck boards
3 ea. Channels for stringer feeding
3 ea. Cassettes for stringer
1 ea. Mechanic clinching plate
Nailing system
Mechanic, electronic beam nailing , 1 ea. nail box-9, Individual nail
picking, Nail indication system, 9 ea. Nailing hammerheads
SPECIFICATION MATERIAL
8
MATERIAL: DECKBOARD
MINIMUM
MAXIMUM
Length
600 mm
1 600 mm
Width
75 mm
150 mm
Thickness
16 mm
28 mm
MATERIAL: STRINGER
MINIMUM
MAXIMUM
Length
600 mm
1 400 mm
Width
75 mm
150 mm
Thickness
16 mm
28 mm
Wing
-20 mm
+50 mm
COMPLETE DECKS SIZE:
MINIMUM
MAXIMUM
Length decks
600 mm
1 600 mm
Width decks
600 mm
1 400 mm
9
MACHINE SERIE 1000
LEG MACHINE OM-1000EL
Standardized, flexible, electronic leg
nailing machine. For various leg sizes
OM-1000EL INCREDIBLE FLEXIBILITY
ONE OPERATOR FEEDS THE OM-1000EL
3 channels with one block cassette for
each channel. 1 board cassette that is
very fast and flexible to adjust. When
processing extremely small series of
pallets, the adjustment time is minimal.
MACHINE SERIE 1000
IM Hart has various additional
machinery that easily can be docked on
to other machines and still preserve the
flexibility of sizes and variation of pallets
that go through the line.
Various types of block legs can easily be produced. Changing to a different size is
simple and fast to perform. A steady stream of legs leaves the OM-1000EL, with an
efficiency of 12 legs per minute. OM-1000EL Works with electronic beam nailing.
SPECIFICATION MACHINE
MACHINE SPECIFICATION FACTS.
STANDARD PERFORMANCE
IM Hart machine deliveries. All machines are delivered according to CE Certification and complete
documentation for Electricity and pneumatics all according to European standard.
Operators
1
Length
2,0m
Width
2,5m excluding platform ladder
Height
3,6m
Power
3,5kw 35A, 3x400V
Pneumatic system
7 bar compressed dried air: 300 L/min
Should be filled and controlled
Container for lubricating oil, Compressor not included
Machine capacity time
12 legs/min
Standard equipment performance
3 ea. Channels motorized adjusted
3 ea. Cassettes, manually adjustable for block sizes
1 ea. Cassettes, manually adjustable for board length
Channels are motorized adjustable
Operators terminal for production control
Program for saving nail positioning
Nailing system
Mechanic, electronic beam nailing , 1 ea. nail box-9, 9 ea. Nailing hammerheads, Individual nail picking,
Nail indication system.
SPECIFICATION MATERIAL
MATRIX MATERIAL: BLOCKS
HEIGHT
Material
Solid wood or pressed blocks
Dimension
70-100 mm
75-150 mm
MATRIX MATERIAL: LEG BOARDS
MINIMUM
MAXIMUM
Length
600 mm
1 600 mm
Width
75 mm
150 mm
Thickness
16 mm
28 mm
MATRIX MATERIAL: ASSEMBLED LEGS
MINIMUM
MAXIMUM
Material
10
WIDTH
Solid wood or pressed blocks
Length
600 mm
1 600 mm
Width
16 mm
150 mm
11
MACHINE SERIE 1000
ASSEMBLY MACHINE SMS-1000EL
Standardized, flexible, electronic
pallet nailing machine
SMS-1000EL IS THE MOST FLEXIBLE PALLET PRODUCER
Within less than a few minutes an adjustment is done, changing to a new
type of pallet size. IM Hart has various additional machinery that can be easily
docked on to other machines and still preserve the flexibility of the sizes and
varieties of pallets that go through the machines.
ONE OPERATOR MANAGE THE SMS-1000EL
Within less than a few minutes an
adjustment is done, changing to a new
type of pallet size. IM Hart has various
additional machinery that can be easily
docked on to other machines and
still preserve the flexibility of the sizes
MACHINE SERIE 1000
and varieties of pallets
that go through the machines.
SPECIFICATION MACHINE
MACHINE SPECIFICATION FACTS.
STANDARD PERFORMANCE
IM Hart machine deliveries. All machines are delivered according to CE Certification and complete
documentation for Electricity and pneumatics all according to European standard.
Operators
1
Length
4,0m
Width
2,5m excluding platform ladder
Height
3,6m
Power
3,5kw 35A ,3x400V
Pneumatic system
7 bar compressed dried air: 300 L/min
Should be filled and controlled
Container for lubricating oil, Compressor not included
Machine capacity time
4 complete pallets/minute (800x1200)
Standard equipment performance
3 ea .Channels motorized adjusted
Program for saving nail positioning
Operators terminal for production control
Nailing system
Mechanic, electronic beam nailing , 1 ea. nail box-9, 9 ea. Nailing hammerheads, 9 ea. indication system,
9 ea. individual nail pickers.
SPECIFICATION MATERIAL
MATERIAL: LEG INKLUDING BLOCKS
MINIMUM
Material
12
MAXIMUM
Solid wood or pressed blocks
Length
600 mm
1 600mm
Width
75 mm
150 mm
Thickness
70+16 mm
100+22 mm
MATERIAL: DECKS
MINIMUM
MAXIMUM
Length
600 mm
1 600 mm
Width
600 mm
1 600 mm
Thickness
16 mm x 2
28 mm x 2
PALLET SIZE
MINIMUM
MAXIMUM
Length decks & legs
600 mm
1 600 mm
Width decks
600 mm
1 600 mm
13
“OUR
MISSION IS TO
MANUFACTURE, DEVELOP
AND MARKET STANDARDIZED NAILING MACHINES
AND PRODUCTION LINES
WITH THE HIGHEST QUALITY FOR THE PALLET INDUSTRY THROUGHOUT
THE WORLD”
14
MACHINE SERIE 1500
Standard lines
15
DECK MACHINE D-1500EL
MACHINE SERIE 1500
Standardized, flexible, electronic
deck nailing machine. Easy to adjust,
open for various leg size
ONE OPERATOR MANAGE THE D-1500EL
Feed the magazines with deck boards
and stringer boards. The electronic
operation put the boards in nailing position. By using electronic beam nailing
system the D-1500EL will nail the decks
together with a capacity of thirty two
(32) boards per minute.
D-1500 is a reliable machine, for
production of pallet decks. Reliable
construction, for continuous use. Professional precision combined with the easy
way to a new deck size.
MACHINE SERIE 1500
SPECIFICATION MACHINE
MACHINE SPECIFICATION FACTS.
STANDARD PERFORMANCE
IM Hart machine deliveries. All machines are delivered according to CE Certification and complete documentation for Electricity and pneumatics all according to European standard.
Operators
1
Length
4,0m
Width
3m excluding platform ladder
Height
3,6m
Power
7,5kw 40A ,3x400V+N
Pneumatic system
7 bar compressed dried air: 400 L/min
Should be filled and controlled
Container for lubricating oil, Compressor not included
Machine capacity time
32 deck boards/min. 4 decks with ea. 8 deck boards (800x1200)
Standard equipment performance
1 ea. Cassette for deck boards inside machine
3 ea. Channels for stringer feeding
3 ea. Cassettes for stringers
1 ea mechanic clinching plate
1 ea. cassette for deck board on belt infeed conveyer
Nailing system
Mechanic, electronic beam nailing , 1 ea. nail box-9, Individual nail
picking, Nail indication system, 9 ea. Nailing hammerheads.
SPECIFICATION MATERIAL
16
MATERIAL: BECKBOARD
MINIMUM
MAXIMUM
Length
600 mm
1 600 mm
Width
75 mm
150 mm
Thickness
16 mm
28 mm
MATERIAL: STRINGER
MINIMUM
MAXIMUM
Length
600 mm
1 400 mm
Width
75 mm
150 mm
Thickness
16 mm
28 mm
Wing
-20 mm
+50 mm
COMPLETE DECKS SIZE:
MINIMUM
MAXIMUM
Length decks
600 mm
1 600 mm
Width decks
600 mm
1 400 mm
17
LEG MACHINE OM-1500EL
MACHINE SERIE 1500
Standardized, flexible, electronic
leg nailing machine. Leg machine
for various leg sizes
INCREDIBLE FLEXIBILITY
Various types of block legs can be easily produced. Changing to a different size is
simple and fast to perform. A steady stream of legs leaves the OM-1500EL, with an
efficiency of 12 legs per minute. OM-1500EL works with electronic beam nailing.
ONE OPERATOR FEEDS THE OM-1500EL
3 channels with a belt conveyer block
infeed. 1 board cassette that is very fast
and flexible to adjust. When processing
extreme small series of pallets, the
adjustment time is minimal. IM Hart has
various additional machinery that can
be easily docked on to other
machines and still preserve the
flexibility of sizes and variation of
pallets that go through the line.
MACHINE SERIE 1500
SPECIFICATION MACHINE
MACHINE SPECIFICATION FACTS.
STANDARD PERFORMANCE
IM Hart machine deliveries. All machines are delivered according to CE Certification and complete documentation for Electricity and
pneumatics all according to European standard.
Operators
1
Length
2,0m
Width
2,5m excluding platform ladder
Height
3,6m
Power
5,5kw 40A ,3x400V
Pneumatic system
7 bar compressed dried air: 300 L/min
Should be filled and controlled
Container for lubricating oil, Compressor not included
Machine capacity time
12 leg/min.
Standard equipment performance
3 ea. Channels motorized adjusted
3 ea. Block stoppers, manually adjusted for blocks position in width
1 ea. Cassettes, manually adjusted for board length
3 ea. Block channels are motorized adjustable
1 ea. Belt conveyer for block infeed
Operators terminal for production control
Program for saving nail positioning
Nailing system
Mechanic, electronic beam nailing , 1 ea. nail box-12, 12 ea. Nailing hammerheads,
Individual nail picking, Nail indication system.
SPECIFICATION MATERIAL
MATRIX MATERIAL: BLOCKS
HEIGHT
Material
Dimension
70-100 mm
75-150 mm
MATRIX MATERIAL: LEG BOARDS
MINIMUM
MAXIMUM
Length
600 mm
1 600 mm
Width
75 mm
150 mm
Thickness
16 mm
28 mm
MATRIX MATERIAL: ASSEMBLED LEGS
MINIMUM
MAXIMUM
Material
18
WIDTH
Solid wood or pressed blocks
Solid wood or pressed blocks
Length
600 mm
1 600 mm
Width
75 mm
150 mm
19
MACHINE SERIE 1500
ROBOT INLINE FEEDING
BETWEEN MACHINES SERIES 1500
Standardized, flexible, inline working
robort system. Easy to adjust,
open for various pallet sizes
ROBOT INLINE FEEDING BETWEEN MACHINES SERIE 1500
Feeding decks and legs into the Assembly machine SMS-1500EL. The deck will
be transported to take position for the
robot by a chain conveyer. Legs will be
transported to be positioned for the robot by the leg positioning conveyer. The
Robot will take decks and legs into
the Assembly machine SMS1500 with a capacity of four (4)
complete pallets per minute.
The Robot is a reliable machine for handling of pallet parts between the nailing
machines and make the complete line
easy to maintain and clean. Reliable
construction for continuous use with a
pneumatic mechanic gripper.
MACHINE SERIE 1500
SPECIFICATION MACHINE
MACHINE SPECIFICATION FACTS.
STANDARD PERFORMANCE
IM Hart machine deliveries. All machines are delivered according to CE Certification and complete documentation for Electricity and
pneumatics all according to European standard.
Operators
0
Working area
3 m radie
Height
3,6m
Power
6,5kw 40A ,3x400V+N
Pneumatic system
7 bar compressed dried air: 400 L/min
Should be filled and controlled
Container for lubricating oil, Compressor not included
Machine capacity time
4 complete pallets/minute (800x1200).
Standard equipment performance
1 ea. Robot 160 kg payload
2 ea. chain conveyer for decks
1 ea. Chain conveyer for legs
1 ea leg rotation and position unit
1 ea. mechaic , pneumatic pallet part gripper
SPECIFICATION MATERIAL
20
MATERIAL: BECKBOARD
MINIMUM
MAXIMUM
Length
600 mm
1 600 mm
Width
75 mm
150 mm
Thickness
16 mm
28 mm
MATERIAL: STRINGER
MINIMUM
MAXIMUM
Length
600 mm
1 600 mm
Width
75 mm
150 mm
Thickness
16 mm
28 mm
Wing
-20 mm
+50 mm
COMPLETE DECKS SIZE:
MINIMUM
MAXIMUM
Length decks
600 mm
1 600 mm
Width decks
600 mm
1 600 mm
21
ASSEMBLY MACHINE SMS-1500EL
MACHINE SERIE 1500
Standardized, flexible, electronic
pallet nailing machine
ONE OPERATOR MANAGE THE SMS-1500
SMS-1500EL IS THE MOST FLEXIBLE PALLET PRODUCER
Very high capacity and perfect for
small and big pallet series. Feed the
SMS-1500EL with separate nailed legs
and decks. The assembly channels are
in width, motorized and adjustable.
SMS-1500EL assembles the pallet and
Within less than a few minutes an adjustment is done, changing to a new type of pallet
size. IM Hart has various additional machinery that can be easily docked on to other
machines and still preserve the flexibility of the sizes and varieties of pallets that go
through the machines.
SPECIFICATION MACHINE
MACHINE SPECIFICATION FACTS.
a a steady stream of pallets leaves the
machine with an efficiency of four (4)
pallets a minute.
MACHINE SERIE 1500
STANDARD PERFORMANCE
IM Hart machine deliveries. All machines are delivered according to CE Certification and complete documentation for Electricity and
pneumatics all according to European standard.
Operators
1
Length
4,0m
Width
2,5m excluding platform ladder
Height
3,6m
Power
3,5kw 35A ,3x400V
Pneumatic system
7 bar compressed dried air: 300 L/min
Should be filled and controlled
Container for lubricating oil, Compressor not included
Machine capacity time
4 complete pallets/minute (800x1200).
Standard equipment performance
3 ea. Channels motorized adjusted
Operators terminal for production control
Program for saving nail positioning
Nailing system
Mechanic, electronic beam nailing , 1 ea. nail box-9, 9 ea. Nailing hammerheads, 9 ea. indication system,
9 ea. individual nail pickers.
SPECIFICATION MATERIAL
MATERIAL: LEGS INCLUDING BLOCKS
MINIMUM
Material
22
MAXIMUM
Solid wood or pressed blocks
Length
600 mm
1 600 mm
Width
75 mm
150 mm
Thickness
70+16 mm
100 + 22 mm
MATERIAL: DECKS
MINIMUM
MAXIMUM
Length
600 mm
1 600 mm
Width
600 mm
1 600 mm
Thickness
16 mm x 2
28 mm x 2
PALLET SIZE
MINIMUM
MAXIMUM
Length deck & legs
600 mm
1 600 mm
Width deck
600 mm
1 600 mm
23
“IM HART - MACHINERY FOR THE PALLET INDUSTRY
EASY TO USE - FLEXIBLE - SUSTAINABLE.”
24
25
MACHINE SERIE 1500
OPTIMIZING BLOCK
CUTTER OKKR-2006
Standardized, flexible,
inline working or separate
standing machine
OPTIMIZING BLOCK CUTTING MACHINE OKKR-2006
Fits all types of pallet production, the
operator put the block material on the
chain infeed conveyer. The block
cutter automatically bring the material
into cutting position, and cut the blocks
in to the preinstalled length.
OKKR-2006 can be programmed to cut
several different shapes in length, from
the same material. Ex 2 ea. 100mm
and then 1 ea. 150mm etc. OKKR-2006:
material length 6 meter chain infeed
conveyer 1,5 m.
MACHINE SERIE 1500
SPECIFICATION MACHINE
MACHINE SPECIFICATION FACTS.
STANDARD PERFORMANCE
IM Hart machine deliveries. All machines are delivered according to CE Certification and complete documentation for Electricity and pneumatics all
according to European standard.
Operators
0
Length
7,5m
Width
1m
Height
1,8m
Power
7 kw 20A ,3x400V+N
Pneumatic system
7 bar compressed dried air: 450 L/min
Should be filled and controlled
Container for lubricating oil, Compressor not included
Machine capacity time
36 blocks/min. (75mmx75mm)
Standard equipment performance
1 Electric engines for saw blade
1 electronic drift for material pucher
1 electronic drift for material pucher
SPECIFICATION MATERIAL
26
MATERIAL
MINIMUM
MAXIMUM
Length
1000 mm
6 000 mm
Width
75 mm
150 mm
Thickness
75 mm
100 mm
27
OKKR-1000
MACHINE SERIE 1500
Standardized, flexible,
inline working or separate
standing machine
OKKR-1000
Fits all types of pallet production, the
operator put the block material on the
chain infeed conveyer. The block
cutter automatically bring the material
into cutting position, and cut the blocks
in to the preinstalled length.
OKKR-1000 can be programmed to cut
several different shapes in length, from
the same material. Ex 2 ea, 100mm
and then 1 ea. 150mm etc. OKKR-1000:
material length 3.
MACHINE SERIE 1500
SPECIFICATION MACHINE
MACHINE SPECIFICATION FACTS.
STANDARD PERFORMANCE
IM Hart machine deliveries. All machines are delivered according to CE Certification and complete documentation for Electricity and pneumatics all
according to European standard.
Operators
0
Length
5m
Width
1m
Height
1,8m
Power
7 kw 20A ,3x400V+N
Pneumatic system
7 bar compressed dried air: 450 L/min
Should be filled and controlled
Container for lubricating oil, Compressor not included
Machine capacity time
36 blocks/min. (75mmx75mm)
Standard equipment performance
1 Electric engines for saw blade
1 cassett for block material
1 electronic drift for material pucher
SPECIFICATION MATERIAL
28
MATERIAL
MINIMUM
MAXIMUM
Length
600 mm
3 000 mm
Width
75 mm
150 mm
Thickness
75 mm
100 mm
29
CHAMFERING MACHINE MFRA
MACHINE SERIE 1500
Standardized, flexible, inline working
machine system. Easy to adjust,
open for various pallet sizes
CHAMFERING MACHINE MFRA
A high effective machine with a smart
construction. The cutters follow the
width of the boards, from 75-150mm
Automatic. MFRA is used automatically
in an after treatment line. The wheels
press the pallet down against the high
performing tooth chains that drives the
pallet straight on to the 6 high speed
cutters.
By pressing a button you adjust the
machine for a new pallet size.
It’s a very fast motorized adjustment,
from the smallest to the largest pallet
size. Easy removable chamfering units,
for maintenance and service outside the
machine.
MACHINE SERIE 1500
SPECIFICATION MACHINE
MACHINE SPECIFICATION FACTS.
STANDARD PERFORMANCE
IM Hart machine deliveries. All machines are delivered according to CE Certification and complete documentation for Electricity and
pneumatics all according to European standard.
Operators
0
Length
2,8m
Width
2,3m
Height
1,8m
Power
15kw 35A ,3x400V+N
Pneumatic system
7 bar compressed dried air: 200 L/min
Should be filled and controlled
Container for lubricating oil, Compressor not included
Cyclone hose diameter
6x80 mm
Cyclone fan capacity
3000 m3 / h
Machine capacity time
4 complete pallets/minute (800x1200).
Standard equipment performance
6 ea. Separate electric engines 3kw 2800 r/m
6 ea. Cutters 5600 r/m
SPECIFICATION MATERIAL
30
MATERIAL:
MINIMUM
MAXIMUM
Length
600 mm
1 600 mm
Width
75 mm
150 mm
Thickness
16 mm
28 mm
WING IN MACHINE DIRECTION:
MINIMUM
MAXIMUM
Length
0 mm
20 mm
Width
0 mm
20 mm
COMPLETE DECKS SIZE:
MINIMUM
MAXIMUM
Length decks
600 mm
1 600 mm
Width decks
600 mm
1 600 mm
Width deck
600 mm
1 600 mm
31
CORNER CUTTING MACHINE HKR
MACHINE SERIE 1500
Standardized, flexible, inline
working machine. Easy to adjust,
open for various pallet sizes
CORNER CUTTING MACHINE HKR
A highly efficient machine with smart
constructions, and various possibilities
to adjust. The HKR is incredibly easy to
fine adjust. Automatic HKR is used automatically in a after treatment line. The
pallet is stopped at the right position.
Two rotating high speed blades cut the
front corners.
Chain conveyors pulls the pallet to
another stopper where the two rear end
corners are cut in the same way.
Fast motorized adjustment when changing to a new pallet size.
MACHINE SERIE 1500
SPECIFICATION MACHINE
MACHINE SPECIFICATION FACTS.
STANDARD PERFORMANCE
IM Hart machine deliveries. All machines are delivered according to CE Certification and complete documentation for Electricity and
pneumatics all according to European standard.
Operators
0
Length
3,3m
Width
2,3m excluding other machines
Height
1,0m
Power
10kw 35A ,3x400V+N
Pneumatic system
7 bar compressed dried air: 200 L/min
Should be filled and controlled
Container for lubricating oil, Compressor not included
Cyclone hose diameter
4x75 mm
Cyclone fan capacity
1600 m3 / h
Machine capacity time
4 complete pallets/minute (800x1200).
Standard equipment performance
4ea. Saw engines 4x3kw 2800r/m
4 ea. Saw blades diameter 400mm 2800 r/m
SPECIFICATION MATERIAL
32
MATERIAL:
MINIMUM
MAXIMUM
Length
600 mm
1 600 mm
Width
75 mm
150 mm
MATERIAL: STRINGER
MINIMUM
MAXIMUM
Length
600 mm
1 400 mm
Width
75 mm
150 mm
WING IN MACHINE DIRECTION:
MINIMUM
MAXIMUM
Length
0 mm
20 mm
Width
0 mm
20 mm
COMPLETE DECKS SIZE:
MINIMUM
MAXIMUM
Length decks
600 mm
1 600 mm
Width decks
600 mm
1 600 mm
33
BRANDING MACHINE BMRA
MACHINE SERIE 1500
Standardized, flexible, inline working
machine system. Easy to adjust,
open for various pallet sizes
BRANDING MACHINE BMRA
A fast working machine with a smart
construction that is very simple to handle and adjust. Variable adjustment of
heat and burning time, to achieve the
absolute best results on different kind
of material circumstances. BMRA is used
automatically in a after treatment line.
Adjust in to what the pallet specification
requires and choose where to brand
the pallet. EUR mark, logo or a text.
Interchangeable matrix that is very easy
to replace. Choose the pallet size and
BMRA then brand the pallet on 2, 4 or 6
places at the same time. Fast motorized
adjustment when changing to a new
pallet size. Branding units are manually
adjusted for precision burn marking.
For a precise marking, there are
individual adjustment possibilities
in length.
MACHINE SERIE 1500
SPECIFICATION MACHINE
MACHINE SPECIFICATION FACTS.
STANDARD PERFORMANCE
IM Hart machine deliveries. All machines are delivered according to CE Certification and complete documentation for Electricity and
pneumatics all according to European standard.
Operators
0
Length
4,3m
Width
2,3m
Height
1,0m
Power
10kw 25A ,3x400V+N
Pneumatic system
7 bar compressed dried air: 200 L/min
Should be filled and controlled
Container for lubricating oil, Compressor not included
Machine capacity time
4 complete pallets/minute (800x1200).
Standard equipment performance
6 ea. Branding units, 3 ea. Heating sticks/ unit
SPECIFICATION MATERIAL
34
MATERIAL:
MINIMUM
MAXIMUM
Length
600 mm
1 600 mm
Width
75 mm
150 mm
Thickness
16 mm
28 mm
COMPLETE DECKS SIZE:
MINIMUM
MAXIMUM
Length decks
600 mm
1 600 mm
Width decks
600 mm
1 600 mm
WING IN MACHINE DIRECTION:
MINIMUM
MAXIMUM
Length
0 mm
20 mm
Width
0 mm
20 mm
35
PALLET TURNER ROT
MACHINE SERIE 1500
Standardized, flexible, inline working
machine system. Easy to adjust,
open for various pallet sizes
PALLET TURNING MACHINE ROT
Roll over turner is used automatically in
a machine line. The operation lifts the
material and changes the Pallet direction, into another conveyor. Or simply
turn the pallet up side down ready for
the next pallet to be nested into the first
before stacking.
The most high efficient and convenient
turner pallets. A fast working machine
with smart construction that is very easy
to handle and adjust.
MACHINE SERIE 1500
SPECIFICATION MACHINE
MACHINE SPECIFICATION FACTS.
STANDARD PERFORMANCE
IM Hart machine deliveries. All machines are delivered according to CE Certification and complete documentation for Electricity and
pneumatics all according to European standard.
Operators
0
Length
3,3m
Width
3,5m
Height
3,3m
Power
1,5kw 6A ,3x400V+N
Pneumatic system
7 bar compressed dried air: 100 L/min
Should be filled and controlled
Container for lubricating oil, Compressor not included
Machine capacity time
4 complete pallets/minute (800x1200).
Standard equipment performance
Electric engines for adjusting
SPECIFICATION MATERIAL
36
MATERIAL:
MINIMUM
MAXIMUM
Length
600 mm
1 600 mm
Width
75 mm
150 mm
Thickness
16 mm
28 mm
COMPLETE DECKS SIZE:
MINIMUM
MAXIMUM
Length decks
600 mm
1 600 mm
Width decks
600 mm
1 600 mm
37
PALLET STACKING MACHINE PSR
MACHINE SERIE 1500
Standardized, flexible, inline working
machine system. Easy to adjust,
open for various pallet sizes
PALLET STACKING MACHINE PSR
A high effective machine with smart
construction that is very easy to handle
and adjust. The machine’s smooth work
with the stack, makes the stack very
straight and stable. Use PSR at the end
of a line, for stacking pallets or decks.
PSR Two lifting arms lift up the stack,
then a chain conveyor drives a new pallet or deck in under the stack, then the
two lift arms go down and pick up the
pallet. Make a change for a new pallet
size: Push the button. It is a very fast
motorized ajdustment in width. Pallet
stop for manual length adjustment.
MACHINE SERIE 1500
SPECIFICATION MACHINE
MACHINE SPECIFICATION FACTS.
STANDARD PERFORMANCE
IM Hart machine deliveries. All machines are delivered according to CE Certification and complete documentation for Electricity and
pneumatics all according to European standard.
Operators
0
Length
3,3m
Width
2,5m
Height
2,3m
Power
3kw 10A ,3x400V+N
Pneumatic system
7 bar compressed dried air: 200 L/min
Should be filled and controlled
Container for lubricating oil, Compressor not included
Machine capacity time
4 complete pallets/minute (800x1200). maximum 1 000g
Standard equipment performance
2 ea. Electric engines for adjusting stacker house
Motorized adjustable chain conveyor
SPECIFICATION MATERIAL
38
MATERIAL:
MINIMUM
MAXIMUM
Length
600 mm
1 600 mm
Width
600 mm
1 600 mm
COMPLETE DECKS SIZE:
MINIMUM
MAXIMUM
Length decks
600 mm
1 600 mm
Width decks
600 mm
1 600 mm
39
CHAIN CONVEYOR UTM
MACHINE SERIE 1500
The chain conveyor makes
the line more flexible and efficent
CHAIN CONVEYOR UTM
A machine with a smart construction
that is very easy to handle and adjust.
UTM conveyers are used automatically in
the machine line.
The pallet transport is controlled by an
electrical engine and work together
with the plc system within the machine
line.
MACHINE SERIE 1500
SPECIFICATION MACHINE
MACHINE SPECIFICATION FACTS.
STANDARD PERFORMANCE
IM Hart machine deliveries. All machines are delivered according to CE Certification and complete documentation for Electricity and
pneumatics all according to European standard.
Operators
Length
2,3m, 4,3m, 6,3m
Width
2,0m
Height
0,7m
Power
1kw 6A 3x400+N
Pneumatic system
Non peneumatic system
Hydraulic system
No hydraulic components
Machine capacity time
1 500kg/ea. 2m
Standard equipment performance
2 ea. Electrical drift engines
Motorized adjustment in width
SPECIFICATION MATERIAL
40
PALLET SIZE:
MINIMUM
MAXIMUM
Pallet
600 mm
1 600 mm
41
PALLET TURNER FLP
MACHINE SERIE 1500
Standardized, flexible, inline working
machine system. Easy to adjust,
open for various pallet sizes
PALLET TURNING MACHINE FLP
Flip over turner are used automatically
in a machine line. The operation is, to
lift the Pallet and turn it up side down
before going into another conveyor for
manual operation or before stacking.
The most high efficient and convenient
turner pallets. A fast working machine
with smart construction that is very easy
to handle and adjust.
MACHINE SERIE 1500
SPECIFICATION MACHINE
MACHINE SPECIFICATION FACTS.
STANDARD PERFORMANCE
IM Hart machine deliveries. All machines are delivered according to CE Certification and complete documentation for Electricity and
pneumatics all according to European standard.
Operators
0
Length
4,3m + 1m skids
Width
2,5m
Height
3,3m
Power
1kw 6A ,3x400V+N
Pneumatic system
7 bar compressed dried air: 0 L/min
Should be filled and controlled
Container for lubricating oil, Compressor not included
Machine capacity time
4 complete pallets/minute (800x1200)
Standard equipment performance
2 Electric engines for adjusting
2 Chain conveyer with 2 drift engine
1 Electric motor for lifting pallet
SPECIFICATION MATERIAL
MATERIAL:
42
MINIMUM
MAXIMUM
Length
600 mm
1 600 mm
Width
600 mm
1 600 mm
COMPLETE DECKS SIZE:
MINIMUM
MAXIMUM
Length decks
600 mm
1 600 mm
Width decks
600 mm
1 600 mm
43
MANUAL WORKING STATION MAN
MACHINE SERIE 1500
Standardized, flexible, inline working
machine system. Easy to adjust,
open for various pallet sizes
MANUAL WORKING STATION MAN
Manual operation on pallets before
stacking. The most high efficient and
convenient manual working station.
A manual working station with smart
construction that is very easy to handle
and adjust.
MACHINE SERIE 1500
SPECIFICATION MACHINE
MACHINE SPECIFICATION FACTS.
STANDARD PERFORMANCE
IM Hart machine deliveries. All machines are delivered according to CE Certification and complete documentation for Electricity and
pneumatics all according to European standard.
Operators
0
Length
3,3m
Width
2,5m
Height
0,8m
Power
0,8kw 6A ,3x400V+N
Pneumatic system
7 bar compressed dried air: 0 L/min
Should be filled and controlled
Container for lubricating oil, Compressor not included
Machine capacity time
4 complete pallets/minute (800x1200). Depending on manual operation
Standard equipment performance
1 Electric engines for adjusting
2 Chain conveyer with 2 drift engine
1 pneumatic connection for air tool
SPECIFICATION MATERIAL
44
MATERIAL:
MINIMUM
MAXIMUM
Length
600 mm
1 600 mm
Width
600 mm
1 600 mm
COMPLETE DECKS SIZE:
MINIMUM
MAXIMUM
Length decks
600 mm
1 600 mm
Width decks
600 mm
1 600 mm
45
MACHINE SERIE 2000
Stringer and
perimeter lines
46
“OUR MISSION IS TO
MANUFACTURE, DEVELOP AND
MARKET STANDARDIZED NAILINGMACHINES AND PRODUCTION LINES WITH THE HIGHEST
QUALITY FOR THE PALLET INDUSTRY THROUGHOUT THE WORLD.”
47
DECK MACHINE D-2000HYD
MACHINE SERIE 2000
Standardized, flexible, hydralic deck nailing
machine. Easy to adjust, open
for various deck sizes
ONE OPERATOR MANAGE THE D-2000HYD
Feed the magazines with deck boards
and stringer boards. The electronic operation puts the boards in nailing position.
By using hydraulic individual nailing system the D-2000HYD will nail the decks
together with a capacity of twenty five
(32) boards per minute.
D-2000HYD is a reliable machine, for
production of pallet decks. Reliable construction for continuous use. Professional
precision combined with the easy way
to handle and adjust to a new deck size.
MACHINE SERIE 2000
SPECIFICATION MACHINE
MACHINE SPECIFICATION FACTS.
STANDARD PERFORMANCE
IM Hart machine deliveries. All machines are delivered according to CE Certification and complete documentation for Electricity and pneumatics all according to European standard.
Operators
1
Length
4,0m
Width
3m excluding platform ladder
Height
3,6m
Power
15 kw 50A, 3x400V+N
Pneumatic system
7 bar compressed dried air: 400 L/min
Should be filled and controlled
Container for lubricating oil, Compressor not included
Machine capacity time
32 deck boards/min. 4 decks with ea. 8 deck boards (800x1200)
Standard equipment performance
1 ea. Cassette for deck boards inside machine
3 ea. Channels for stringer feeding
3 ea. Cassettes for stringers
1 ea mechanic clinching plate
1 ea. cassette for deck board on belt infeed conveyer
1 ea. Hydraulic unit
Nailing system
Hydraulic individual nailing , 1 ea. nail box-9, Individual nail picking, Nail indication system, 9 ea. Nailing hammerheads
SPECIFICATION MATERIAL
48
MATERIAL: DECKBOARD
MINIMUM
MAXIMUM
Length
600 mm
1 600 mm
Width
75 mm
150 mm
Thickness
16 mm
28 mm
MATERIAL: STRINGER
MINIMUM
MAXIMUM
Length
600 mm
1 400 mm
Width
75 mm
150 mm
Thickness
16 mm
28 mm
Wing
-20 mm
+50 mm
COMPLETE DECKS SIZE:
MINIMUM
MAXIMUM
Length decks
600 mm
1 600 mm
Width decks
600 mm
1 400 mm
49
LEG MACHINE OM-2000HYD
MACHINE SERIE 2000
Standardized, flexible, hydralic leg
nailing machine. Leg machine
for various leg sizes
ONE OPERATOR FEEDS THE OM-2000HYD
3 channels, with belt conveyer block
infeed. 1 board cassette, that is very fast
and flexible to adjust. When processing extreme small series of pallets, the
adjustment time is minimal.
IM Hart has various additional machinery that can be easily docked on to
other machines and still preserve the
flexibility of sizes and variation of pallets that go through the line.
MACHINE SERIE 2000
INCREDIBLE FLEXIBILITY
Various types of block legs can easy be produced. Changing to a different size is simple and fast to perform. A steady stream of legs leaves the OM-2000HYD, with an efficiency of 12 legs per minute. OM-2000HYD works with Hydraulic individual nailing.
SPECIFICATION MACHINE
MACHINE SPECIFICATION FACTS.
STANDARD PERFORMANCE
IM Hart machine deliveries. All machines are delivered according to CE Certification and complete documentation for Electricity and pneumatics all
according to European standard.
Operators
1
Length
2,0m
Width
2,5m excluding platform ladder
Height
3,6m
Power
15 kw 50A, 3x400V
Pneumatic system
7 bar compressed dried air: 500 L/min
Should be filled and controlled
Container for lubricating oil, Compressor not included
Machine capacity time
12 legs/min
Standard equipment performance
3 ea. Channels motorized adjusted
3 ea. block stoppers, maually adjusted for blocks position in width
1 ea. Cassettes, manually adjustable for board length
3 ea. Block Channels are motorized adjustable
1 ea belt conveyer for block infeed
Operators terminal for production control
Program for saving nail positioning
Nailing system
Hydraulic individual nailing , 1 ea. nail box-9, 9 ea. Nailing hammerheads, Individual nail picking,
Nail indication system
SPECIFICATION MATERIAL
MATRIX MATERIAL: BLOCKS
MINIMUM
Material
Dimension
70-100 mm
75-150 mm
MATRIX MATERIAL: LEG BOARDS
MINIMUM
MAXIMUM
Length
600 mm
1 600 mm
Width
75 mm
150 mm
Thickness
16 mm
28 mm
MATERIAL: ASSEMBLED LEGS
MINIMUM
MAXIMUM
Length
600 mm
1 600 mm
Width
75 mm
150 mm
Material
50
MAXIMUM
Solid wood or pressed blocks
Solid wood or pressed blocks
51
ROBOT INLINE FEEDING BETWEEN
MACHINES SERIE 2000
MACHINE SERIE 2000
Standardized, flexible, inline working
robot system. Leg machine for
various leg sizes
ROBOT INLINE FEEDING BETWEEN MACHINES SERIE 2000
Robot inline feeding between machines
Serie 2000 Feeding decks and legs into
the Assembly machine SMS-2000. The
deck will be transported to take position
for the robot by a chain conveyer. Legs
will be transported and positioned to
take position for the robot by the leg
positioning conveyer. The Robot will
take deck and legs into assembly machine SMS-2000 with a capacity of four
(4) complete pallets per minute.
The Robot is a reliable machine, for handling of pallet parts between the nailing
machines and make the complete line
easy to maintain and clean. Reliable
construction, for continuous use with a
pneumatic mechanic gripper.
Professional precision combined with
the easy way to handle and adjust to a
new deck size.
MACHINE SERIE 2000
SPECIFICATION MACHINE
MACHINE SPECIFICATION FACTS.
STANDARD PERFORMANCE
IM Hart machine deliveries. All machines are delivered according to CE Certification and complete documentation for Electricity and pneumatics all
according to European standard.
Operators
0
Working area
3m radie
Height
3,6m
Power
6,5 kw 50A, 3x400V+N
Pneumatic system
7 bar compressed dried air: 400 L/min
Should be filled and controlled
Container for lubricating oil, Compressor not included
Machine capacity time
4 complete pallets/min. (800x1200)
Standard equipment performance
1 ea. Robot 160 kg payload
2 ea. chain conveyer for decks
1 ea. Chain conveyer for legs
1 ea leg rotation and position unit
1 ea. mechaic , pneumatic pallet part gripper
SPECIFICATION MATERIAL
52
MATERIAL: DECKBOARD
MINIMUM
MAXIMUM
Length
600 mm
1 600 mm
Width
75 mm
150 mm
Thickness
16 mm
28 mm
MATERIAL: STRINGER
MINIMUM
MAXIMUM
Length
600 mm
1 600 mm
Width
75 mm
150 mm
Thickness
16 mm
28 mm
Wing
-20 mm
+50 mm
COMPLETE DECKS SIZE:
MINIMUM
MAXIMUM
Length decks
600 mm
1 600 mm
Width decks
600 mm
1 600 mm
53
ASSEMBLY MACHINE
SMS-2000HYD
MACHINE SERIE 2000
Standardized, flexible, hydralic pallet
nailing machine
ONE OPERATOR OR ROBOT MANAGE THE SMS-2000HYD
Very high capacity and perfect for small
and big pallet series. Feed the SMS2000HYD with separate nailed legs and
decks. The assembly channels are in
width, motorized adjustable.
SMS-2000HYD assembles the pallet.
A steady stream of pallets leave the
machine with an efficiency of four (4)
pallets a minute.
MACHINE SERIE 2000
SMS-2000HYD IS THE MOST FLEXIBLE PALLET PRODUCER
Within less than a few minutes, adjustment is done, changing to a new type of pallet size. IM
Hart has various additional machinery that can be easily docked on to other machines and still
preserve the flexibility of the sizes and varieties of pallets that go through the machines.
SPECIFICATION MACHINE
MACHINE SPECIFICATION FACTS.
STANDARD PERFORMANCE
IM Hart machine deliveries. All machines are delivered according to CE Certification and complete documentation for Electricity and pneumatics all
according to European standard.
Operators
1
Length
4m
Width
2,5m excluding platform ladder
Height
3,6m
Power
15 kw 50A, 3x400V
Pneumatic system
7 bar compressed dried air: 300 L/min
Should be filled and controlled
Container for lubricating oil, Compressor not included
Machine capacity time
4 complete pallets/min. (800x1200)
Standard equipment performance
3 ea .Channels motorized adjusted
1 ea Hydraulic unit
Program for saving nail positioning
Operators terminal for production control
1 ea nailing support for perimeter pallets
Nailing system
Hydraulic individual nailing , 1 ea. nail box-9, 9 ea. Nailing hammerheads, 9 ea. indication system,
9 ea. individual nail pickers.
SPECIFICATION MATERIAL
MATERIAL: LEGS INCLUDING BLOCKS
MINIMUM
Material
54
MAXIMUM
Solid wood or pressed blocks
Length
600 mm
1 600 mm
Width
75 mm
150 mm
Thickness
70+16 mm
100+22 mm
MATERIAL: DECKS
MINIMUM
MAXIMUM
Length
600 mm
1 600 mm
Width
600 mm
1 600 mm
Thickness
16 mm x2
28 mm x2
PALLET SIZE:
MINIMUM
MAXIMUM
Length deck & legs
600 mm
1 600 mm
Width deck
600 mm
1 600 mm
55
PERIMETER MACHINE
PEM-2000 HYD
MACHINE SERIE 2000
Standardized, flexible,
electric pallet nailing machine
PERIMETER NAILING MACHINE PEM-2000HYD
The final phase is to assemble the perimeter boards. The pallet comes in to
the channel in the Perimeter machine,
with the deck face down, and the legs
face up. The side infeed conveyer bring
the perimeter board into the machine
in position across the legs, and carriers
adjust the boards to the naked part of
the blocks.
The pallet moves in position so that the
electric individual nailing can nail the
perimeter board on each end of the
pallet. Within less, then a few minutes,
adjustment is done, changing to a new
type of pallet size.
MACHINE SERIE 2000
SPECIFICATION MACHINE
MACHINE SPECIFICATION FACTS.
STANDARD PERFORMANCE
IM Hart machine deliveries. All machines are delivered according to CE Certification and complete documentation for Electricity and pneumatics all
according to European standard.
Operators
1
Length
4m
Width
2,5m excluding platform ladder
Height
3,6m
Power
15 kw 50A, 3x400V
Pneumatic system
7 bar compressed dried air: 300 L/min
Should be filled and controlled
Container for lubricating oil, Compressor not included
Machine capacity time
4 complete pallets/min. (800x1200)
Standard equipment performance
2 ea .Channels motorized adjusted
1 ea Electric unit
Program for saving nail positioning
Operators terminal for production control
1 ea nailing support for perimeter pallets
Nailing system
Electric individual nailing , 1 ea. nail box-9, 9 ea. Nailing hammerheads, 9 ea. indication system,
12 ea. individual nail pickers.
SPECIFICATION MATERIAL
MATERIAL: LEGS INCLUDING BLOCKS
MINIMUM
Material
56
MAXIMUM
Solid wood or pressed blocks
Length
600 mm
1 600 mm
Width
75 mm
150 mm
Thickness
70+16 mm
100+22 mm
MATERIAL: DECKS
MINIMUM
MAXIMUM
Length
600 mm
1 600 mm
Width
600 mm
1 600 mm
Thickness
16 mm x2
28 mm x2
PALLET SIZE
MINIMUM
MAXIMUM
Length deck & legs
600 mm
1 600 mm
Width deck
600 mm
1 600 mm
WING ON PERIMETER BOARD
MINIMUM
MAXIMUM
Width direction:
-0 mm
+20 mm
Length direction
-0 mm
+20 mm
57
STRINGER PALLET MACHINE
REM-2000EL
MACHINE SERIE 2000
Standardized, flexible, stringer pallet nailing
machine. Easy to adjust,open for
various stringer pallet sizes
REM-2000El is a reliable machine,
for production of stringer pallet.
Reliable construction, for continuously use. Professional precision combined with the
easy way to handle and adjust to a new stringer pallet size.
ONE OPERATOR MANAGE THE REM-2000EL
Feed the magazines with deck boards
and stringers. The material carriers put
the boards and stringers into
nailing position.
By using electronic nailing system the
REM-2000EL will nail the stringer pallet
together with a capacity of twenty five
(28) topboards per minute.
MACHINE SERIE 2000
SPECIFICATION MACHINE
MACHINE SPECIFICATION FACTS.
STANDARD PERFORMANCE
IM Hart machine deliveries. All machines are delivered according to CE Certification and complete documentation for Electricity and pneumatics all
according to European standard.
Operators
1
Length
4m
Width
3m excluding platform ladder
Height
3,6m
Power
7,5 kw 40A, 3x400V+N
Pneumatic system
7 bar compressed dried air: 400 L/min
Should be filled and controlled
Container for lubricating oil, Compressor not included
Machine capacity time
28 deck boards/min. 4 stringer pallets with ea. 7 top boards (800x1200)
Standard equipment performance
2 ea. cassette for deck board on belt infeed conveyer
5 ea. Channels for stringer feeding
5 ea. Cassettes for stringers
Nailing system
Electronic nailing system, 1 ea. nail boxes IMH-12, Individual nail picking, Nail indication
system, 12 ea. Nailing hammerheads
SPECIFICATION MATERIAL
58
MATERIAL: TOPBOARD
MINIMUM
MAXIMUM
Length
600 mm
1 600 mm
Width
75 mm
150 mm
Thickness
16 mm
28 mm
MATERIAL: STRINGER
MINIMUM
MAXIMUM
Length
600 mm
1 400 mm
Width
30 mm
100 mm
Hight
60 mm
100 mm
Wing
-20 mm
+80 mm
STRINGER PALLET SIZE
MINIMUM
MAXIMUM
Length decks
600 mm
1 600 mm
Width decks
600 mm
1 400 mm
59
STRINGER PALLET MACHINE
UBM-2000 EL
MACHINE SERIE 2000
Standardized, flexible,
hydralic pallet stringer machine
STRINGER PALLET MACHINE UBM-2000 EL
After the stringer pallet nailing machine
REM-2000EL and the FLP turner the
stringer pallet machine UBM- 2000EL
nails the second side boards.
Two adjustable channels lead the
stringer pallet in position for nailing the
boards.
The two cassettes outside the machine
drops down boards on belt conveyer
that takes them infront of the carriers as
bring the board in position, just before
nailing.
MACHINE SERIE 2000
UBM-2000EL is a reliable machine, for production of
double side stringer pallets.
Professional precision combined with the easy way to
handle and adjust to new stringer pallet size.
SPECIFICATION MACHINE
MACHINE SPECIFICATION FACTS.
STANDARD PERFORMANCE
IM Hart machine deliveries. All machines are delivered according to CE Certification and complete documentation for Electricity and pneumatics all
according to European standard.
Operators
1
Length
4m
Width
2,5m excluding platform ladder
Height
3,6m
Power
7,5 kw 40A, 3x400V
Pneumatic system
7 bar compressed dried air: 300 L/min
Should be filled and controlled
Container for lubricating oil, Compressor not included
Machine capacity time
4 complete pallets/min. (800x1200) (stringer pallets 25 boards/ minute)
Standard equipment performance
2 ea .Channels motorized adjusted
2ea. nailing support for stringer pallets motorized adjustmed
Program for saving nail positioning
Operators terminal for production control
1 ea nailing support for stringer pallets fixed in middle
Nailing system
Electronic nailing , 1 ea. nail box-12, 12 ea. Nailing hammerheads, 12 ea. indication system, 12 ea. individual nail pickers.
SPECIFICATION MATERIAL
MATERIAL:
MINIMUM
MAXIMUM
Length
600 mm
1 400 mm
Material stringers
Width
30 mm
100 mm
Height
60 mm
100 mm
MATERIAL: TOP BOARDS
MINIMUM
MAXIMUM
Length
600 mm
1 600 mm
Width
75 mm
150 mm
Thickness
16 mm
28 mm
STRINGER PALLET SIZE
MINIMUM
MAXIMUM
Length deck & legs
600 mm
1 600 mm
Width deck
600 mm
1 400 mm
Length
600 mm
1600 mm
Width
75 mm
150 mm
Thickness
16 mm
28 mm
Wing on top board
-20 mm
+80 mm
MATERIAL: SECOND SIDE BOARD
60
61
PALLET TURNER FLP
MACHINE SERIE 2000
Standardized, flexible, inline working
machine system. Easy to adjust,
open for various pallet sizes
PALLET TURNING MACHINE FLP
Flip over turner are used automatically
in a machine line. The operation is to
lift the Pallet and turn it up side down
before going into another conveyor for
manual operation or before stacking.
The most high efficient and convenient
turner pallets. A fast working machine
with smart construction that is very easy
to handle and adjust.
MACHINE SERIE 2000
SPECIFICATION MACHINE
MACHINE SPECIFICATION FACTS.
STANDARD PERFORMANCE
IM Hart machine deliveries. All machines are delivered according to CE Certification and complete documentation for Electricity and pneumatics all
according to European standard.
Operators
0
Length
4,3m
Width
2,5m
Height
3,3m
Power
1 kw 6A, 3x400V+N
Pneumatic system
7 bar compressed dried air: 0 L/min
Should be filled and controlled
Container for lubricating oil, Compressor not included
Machine capacity time
4 complete pallets/min. (800x1200)
Standard equipment performance
2 Electric engine for adjusting
2 Chain conveyer with 2 drift engine
1 Electric motor for lifting pallet
SPECIFICATION MATERIAL
62
MATERIAL
MINIMUM
MAXIMUM
Length
600 mm
1 600 mm
Width
600 mm
1 600 mm
COMPLETE DECKS SIZE:
MINIMUM
MAXIMUM
Length decks
600 mm
1 600 mm
Width decks
600 mm
1 600 mm
63
MACHINE SERIE 2500
Special size
machines
64
“BUILD YOUR MACHINE
INVESTMENTS IN STEPS,
IN YOUR OWN PACE.”
65
DECK MACHINE D-2500HYD
Standardized, flexible, hydralic deck and
stringer machine. Easy to adjust, open for
special size decks and stringer pellets
MACHINE SERIE 2500
ONE OPERATOR MANAGE THE D-2500HYD
Feed the magazines with deck boards
and stringer boards. The electronic operation puts the boards in nailing position.
By using hydraulic individual nailing system the D-2500HYD will nail the decks
together with a capacity of twenty (20)
boards per minute.
D-2500HYD is a reliable machine, for
production of special size pallet decks
and one sidestringer pallets. Reliable
construction for continuous use.
Professional precision combined with
the easy way to handle and adjust to
a new deck or one side stringer pallet
size.
MACHINE SERIE 2500
SPECIFICATION MACHINE
MACHINE SPECIFICATION FACTS.
STANDARD PERFORMANCE
IM Hart machine deliveries. All machines are delivered according to CE Certification and complete documentation for Electricity and pneumatics all
according to European standard.
Operators
1
Length
4m
Width
3m excluding platform ladder
Height
3,6m
Power
15 kw 50A, 3x400V+N
Pneumatic system
7 bar compressed dried air: 400 L/min
Should be filled and controlled
Container for lubricating oil, Compressor not included
Machine capacity time
20 deck boards/min. 3 decks with ea. 5 deck boards (800x1200)
Standard equipment performance
2 ea. cassette for deck board on belt infeed conveyer
5 ea. Channels for stringer feeding
5 ea. Cassettes for stringers
1 ea mechanic clinching plate
1 ea. Hydraulic unit
1 ea Hydraulic movable upper beam
1 ea linier unit for quick change of nailbox
Nailing system
Hydraulic individual nailing , 2 ea. nail box-12, Individual nail picking, Nail indication system, 12 ea. Nailing hammerheads
SPECIFICATION MATERIAL
66
MATERIAL: DECKBOARD
MINIMUM
MAXIMUM
Length
800 mm
2 500 mm
Width
75 mm
150 mm
Thickness
16 mm
28 mm
MATERIAL: STRINGER
MINIMUM
MAXIMUM
Length
800 mm
1 800 mm
Width
75 mm
150 mm
Thickness
16 mm
100 mm
Wing
-20 mm
+200 mm
COMPLETE DECKS SIZE:
MINIMUM
MAXIMUM
Length deck & legs
800 mm
2 500 mm
Width deck
800 mm
1 800 mm
67
LEG MACHINE OM-2500HYD
Standardized, flexible, hydralic leg nailing
machine. Leg machine for special sixe leg
MACHINE SERIE 2500
Incredible flexibility
ONE OPERATOR FEEDS THE OM-2500HYD
5 channels with belt conveyer block
infeed. 2 board cassette, that is very fast
and flexible to adjust. When processing extreme small series of pallets, the
adjustment time is minimal.
IM Hart has various additional machinery that can be easily docked on to
other machines and still preserve the
flexibility of sizes and variation of pallets
that go through the line.
MACHINE SERIE 2500
Various types of block legs can easily be produced. Changing to a different size
is simple and fast to perform. A steady stream of legs leaves the OM-2500HYD,
with an efficiency of 9 legs per minute.OM-2500HYD works
with hydraulic individual nailing.
SPECIFICATION MACHINE
MACHINE SPECIFICATION FACTS.
STANDARD PERFORMANCE
IM Hart machine deliveries. All machines are delivered according to CE Certification and complete documentation for Electricity and pneumatics all
according to European standard.
Operators
1
Length
2m
Width
11m
Height
3,6m
Power
15 kw 50A, 3x400V
Pneumatic system
7 bar compressed dried air: 700 L/min
Should be filled and controlled
Container for lubricating oil, Compressor not included
Machine capacity time
9 legs/min
Standard equipment performance
5 ea. Channels motorized adjusted
5 ea. block stoppers, maually adjusted for blocks position in width
2 ea. Cassettes, Motor adjustable for board length
5 ea. Block Channels are motorized adjustable
2 ea belt conveyer for block infeed
Operators terminal for production control
Program for saving nail positioning
Nailing system
Hydraulic individual nailing , 1 ea. nail box-12, 12 ea. Nailing hammerheads, Individual nail picking, Nail indication system
SPECIFICATION MATERIAL
MATRIX MATERIAL: BLOCKS
MINIMUM
Material
Dimension
70-100 mm
75-150 mm
MATRIX MATERIAL: LEG BOARDS
MINIMUM
MAXIMUM
Length
800 mm
2 500 mm
Width
75 mm
150 mm
Thickness
16 mm
28 mm
MATERIAL: ASSEMBLED LEGS
MINIMUM
Material
68
MAXIMUM
Solid wood or pressed blocks
MAXIMUM
Solid wood and or pressed blocks
Length
800 mm
2 500 mm
Width
75 mm
150 mm
69
ROBOT INLINE FEEDING BETWEEN
MACHINES SERIE 2500
MACHINE SERIE 2500
Standardized, flexible, inline working robot
system. Easy to adjust, open for
various pallet sizes
ROBOT INLINE FEEDING BETWEEN MACHINES SERIE 2500
Feeding decks and legs into Assembly
machine SMS-2500. The deck will be
transported to take position for the
robot by a chain conveyer. Legs will be
transported to be positioned for the
robot by the leg positioning conveyer.
The Robot will take decks and legs into
the assembly machine SMS-2500 with
a capacity of three (3) complete pallets
per minute.
The Robot is a reliable machine, for handling of pallet parts between the nailing
machines and make the complete line
easy to maintain and clean. Reliable
construction for continuous use with a
vacuum gripper. Professional precision
combined with the easy way to handle
and adjust to a new deck size.
MACHINE SERIE 2500
SPECIFICATION MACHINE
MACHINE SPECIFICATION FACTS.
STANDARD PERFORMANCE
IM Hart machine deliveries. All machines are delivered according to CE Certification and complete documentation for Electricity and pneumatics all
according to European standard.
Operators
0
Length
8m
Width
8m excluding other machines
Height
3,6m
Power
8,5 kw 50A, 3x400V+N
Pneumatic system
7 bar compressed dried air: 100 L/min
Should be filled and controlled
Container for lubricating oil, Compressor not included
Machine capacity time
3 complete pallets/min. (800x1200)
Standard equipment performance
1 ea. Robot 300 kg payload
2 ea. chain conveyer for decks
1 ea. Chain conveyer for legs
1 ea leg rotation and position unit
1 ea. vacuum pallet part gripper
SPECIFICATION MATERIAL
MATERIAL: DECKBOARD
MINIMUM
MAXIMUM
Length
800 mm
2 500 mm
Width
75 mm
150 mm
MATERIAL: STRINGER
MINIMUM
MAXIMUM
Length
800 mm
1 800 mm
Width
75 mm
150 mm
Thickness
16 mm
28 mm
Thickness
Wing
70
COMPLETE DECKS SIZE:
MINIMUM
MAXIMUM
Length decks
800 mm
2 500 mm
Width decks
800 mm
1 800 mm
71
ASSEMBLY MACHINE
SMS-2500HYD
MACHINE SERIE 2500
Standardized, flexible, hydraulic special
size nailing machine
ONE OPERATOR OR ROBOT MANAGE THE SMS-2500HYD
High flexibility and perfect for special
size pallet assembly. Feed the SMS2500HYD with separate nailed legs and
decks. The assembly channels are in
width, motorized and adjustable.
SMS-2500HYD assembles the pallet.
A steady stream of pallets leave the
machine with an efficiency of three (3)
pallets a minute.
MACHINE SERIE 2500
SMS-2500HYD is the most flexible pallet producer
Within less than a few minutes, adjustment is done, changing to a new type of
pallet size. IM Hart has various additional machinery that can be easily docked
on to other machines and still preserve the flexibility of the sizes
and varieties of pallets that goes through the machines.
SPECIFICATION MACHINE
MACHINE SPECIFICATION FACTS.
STANDARD PERFORMANCE
IM Hart machine deliveries. All machines are delivered according to CE Certification and complete documentation for Electricity and pneumatics all
according to European standard.
Operators
1
Length
5m
Width
2,5m excluding platform ladder
Height
3,6m
Power
15 kw 50A, 3x400V
Pneumatic system
7 bar compressed dried air: 300 L/min
Should be filled and controlled
Container for lubricating oil, Compressor not included
Machine capacity time
3 complete pallets/min. (800x1200)
Standard equipment performance
3 ea .Channels motorized adjusted
1 ea Hydraulic unit
Program for saving nail positioning
Operators terminal for production control
1 ea nailing support for perimeter pallets
Nailing system
Hydraulic individual nailing , 1 ea. nail box-9, 9 ea. Nailing hammerheads, 9 ea. indication system,
9 ea. individual nail pickers.
SPECIFICATION MATERIAL
MATERIAL: LEGS INCLUDING BLOCKS
MINIMUM
Material
72
MAXIMUM
Solid wood or pressed blocks
Length
800 mm
2 500 mm
Width
75 mm
150 mm
Thickness
70+16 mm
100+22 mm
MATERIAL: DECKS
MINIMUM
MAXIMUM
Length
800 mm
2 500 mm
Width
800 mm
1 800 mm
Thickness
16 mm x2
28 mm x2
PALLET SIZE
MINIMUM
MAXIMUM
Length deck & legs
800 mm
2 500 mm
Width deck
800 mm
1 800 mm
73
STACKING ROBOT SERIE 2500
Standardized, flexible, inline working robot
system. Easy to adjust, open for
various pallet sizes
MACHINE SERIE 2500
STACKING ROBOT SERIE 2500
The Robot will take a pallet from the
chain conveyer after the assembly
machine SMS-2500HYD have assembled
them and stacked the pallets with a capacity of three (3) complete pallets per
minute. The Robot is a reliable machine,
for stacking pallets of a special size and
make the complete line easy to maintain and clean.
Reliable construction for continuous use
with a vacuum gripper. Professional precision combined with the easy way to
handle and adjust to a new pallet size.
MACHINE SERIE 2500
SPECIFICATION MACHINE
MACHINE SPECIFICATION FACTS.
STANDARD PERFORMANCE
IM Hart machine deliveries. All machines are delivered according to CE Certification and complete documentation for Electricity and pneumatics all
according to European standard.
Operators
0
Working area
3m radie
Width
8m excluding other machines
Power
8,5 kw 50A, 3x400V+N
Pneumatic system
7 bar compressed dried air: 100 L/min
Should be filled and controlled
Container for lubricating oil, Compressor not included
Machine capacity time
3 complete pallets/min. (800x1200)
Standard equipment performance
1 ea. Robot 300 kg payload
1 ea. chain conveyer for ready nailed pallet
1 ea. Chain conveyer for stacked pallets outfeed
1 ea. vacuum pallet part gripper
SPECIFICATION MATERIAL
74
MATERIAL: DECKBOARD
MINIMUM
MAXIMUM
Length
800 mm
2 500 mm
Width
75 mm
150 mm
Thickness
16 mm
28 mm
MATERIAL: STRINGER
MINIMUM
MAXIMUM
Length
800 mm
1 800 mm
Width
75 mm
150 mm
Thickness
16 mm
28 mm
Wing
-20 mm
+200 mm
COMPLETE DECKS SIZE
MINIMUM
MAXIMUM
Length decks
800 mm
2 500 mm
Width deck
800 mm
1 800 mm
75
A
CUSTOMER
IM Hart AB
R-1000 EL
ORDER NO.
R-1000
EL
B
DATE
2013
Item
De
29000
C
6000
17000
14m
D
6000
p ebh
MACHINE LINE
OVERVIEW
Elskå
E
F
1
2
3
A
1
2
3
4
15m
5
6
7
6
7
CUSTOMER
IM Hart AB
3ML-1000 EL
ORDER NO.
3ML-1000
EL
B
DATE
2013
Item
De
29000
C
9700
11000
17000
13m
D
E
p ebh
Elskå
15m
p ebh
Elskå
F
1
76
2
3
7
6
77
KOPPARBERG
SWEDEN
A
A
CUSTOMER
IM Hart AB
Robot Line 1
ORDER NO.
ROBOT
LINE 1500 EL 1
B
LAYOUT
DRAWN BY
DATE
PERIMETER PALLET
LINE BPEM-2000 HYD
SCALE
3ML-1500 EL1:100
IM Hart AB
2013
Item
Description
29000
26000
C
C
D
D
p ebh
15000
17000
Elskå
E
E
p ebh
Elskå
1
F
F
1
2
3
6
7
8
2
3
4
5
7
6
KOP
SW
A
CUSTOMER
IM Hart AB
Stringer Pallet Line REM
ORDER NO.
ROBOT LINE 1500 EL 2
STRINGER
PALLET LINE
B
2000 EL
DATE
2013
Item
Descrip
29000
C
8000
17000
D
E
23000
F
1
78
2
3
6
7
79
KOPPARBERG
SWEDEN
A
A
CUSTOMER
B
IM Hart AB
3ML- 2500 1:100
Special Pallet Line 2500
ORDER NO.
SPECIAL PALLET LINE
2500 HYD
LAYOUT
DRAWN BY
DATE
IM Hart AB
2013
Item
SCALE
B
Description
29000
C
C
24000
0
12
IMbar
HART
10
2
6
6
4
8
4
8
10
2
0
12
HART
IMbar
D
12000
17000
D
E
hbe
E
påk
slE
F
F
1
80
2
3
6
7
8
81
KOPPARBERG
IM HART TODAY
Several times a month, machines leave
the factory to be delivered somewhere
in the world. Sweden stands for two
percents of the companies turnover
between 2003 and 2007.
Today IM Hart AB has machines in 15
countries, and the amount of machines
and new countries increases every year.
CONTACT
IM Hart AB
Kvarngatan 13, SE-714 31 KOPPARBERG
Tel. +46 (0) 580 293 20
Fax +46 (0) 580 103 99
e-mail: imhart@imhart.se
www.imhart.se
82
On top of that, Mattias and Ingemar
Hart received the award ”The year’s
entrepreneurs of Sweden 2007”, which
was, and is, a major step for IM Hart AB.
It’s a comfirmation for a job well done
in total.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising