Pulley Therapy - PT. SEKAR Surya Mandiri

Pulley Therapy - PT. SEKAR Surya Mandiri
CHINESPORT General Catalogue - 2016 International Edition
4
Pulley Therapy
1. ARCHIMEDES™ system - Introduction
page 176
2. Pulley therapy frames
page 178
2.1 Fixed Wall Frames
page 178
2.2 Fixed Ceiling Frames
page 179
2.3 2-sided Fixed Frames
page 180
2.4 Self-supporting frames
page 182
2.5 Configuration Options
page 184
3. Additional equipment
page 188
3.1 Straps and supports
page 188
3.2 Handles
page 190
3.3 Other Tools
page 191
3.4 Sets of accessories
page 195
4. ERCOLINA™ and POLIERCOLINA™
page 196
5. Continued Intensive Rehabilitation (R.I.C.)
page 200
5.1 Frames
page 200
5.2 Accessories
page 203
5.3 The method
page 205
Archimedes
Pulley Therapy System
This is an open pulley therapy system that offers a wide range of exercises of various types, to
meet the needs of the professional and the patient. More specifically, it is made up of modular
structures that can be adapted to suit operating needs and the space available, a set of harnesses
for different areas of the body, and other equipment that complete what is required. The system
allows for creativity in designing specific rehabilitation programmes.
The so-called “cage” frame shown above represents the CONFIGURATION EXAMPLE n. 6 described further on in this section.
1) METAL FRAMES
The pulley therapy metal frame system is modular, wide and flexible to meet the
professional’s requirements depending on available space and type of exercises to
develop.
This means that options range from fixed wall or ceiling frames to free-standing
frames with two or more support planes. In addition, each work station proposed
in its standard configuration can be supplemented by various types of side grids or
reinforcement details to increase the safe working load at any time, whether at the
moment of purchase or later.
Some icon symbols provide information on maximum or additional standard load for
different metal frames. Other basic elements, intended as optionals or accessories,
can create more configurations in addition to the proposed standard ones. Some
examples are shown in the following pages.
176
www.chinesport.com
2) STRAPS AND SUPPORTS
Straps and supports were designed in various sizes so they can be applied to different body regions to meet specific activity needs. These items meet the requirements
of easy sanitation, durability and ease of use when setting up the exercises.
3) ADDITIONAL EQUIPMENT
A number of additional equipment to be used along with or in alternative to harnesses are proposed. This equipment was conceived for various types of exercises and
may also be used by professionals to create personalized workout programs to suit
the patient’s specific needs.
4) COUCHES
UniX series couches are suitable to be used either on their own or in combination
with the frames illustrated further on. These couches can be height-adjusted electrically or hydraulically, but there is no segment displacement during adjustment. This
means that they can be configured with or without transport castors, and a series
of accessories is available. As an alternative, we can also recommend our couches
from the Sinthesi range, which are suitable for manipulation and postural exercises.
Please read the dedicated section on Chinesport couches.
Certificazione richiesta d
Europea e riconosciuta a
Internazionale
Introduction
Made in Italy
4
Due to its vast versatility, Pulley Therapy
can be used for adolescents and the aged,
for both preventive and therapeutic treatments.
INDICATIONS FOR PREVENTIVE TREATMENT:
• It makes it possible to make movements and
assume postures, which keep the correct body
balance in the person.
• It prevents damage due to asymmetrical activity
by workers.
• In adolescents, it facilitates harmonious growth,
protecting against disharmony as a result of
sport, play or study activities.
INDICATIONS FOR THERAPEUTIC TREATMENT:
• It favours the mobility and stability of joints after
trauma, or in a degenerative pathology context.
• It improves muscle performance and movement
of the fascias and therefore the lymphatic
vascular flow.
• It makes it possible to assume re-balancing
postures for the capsular ligament structures.
• It speeds up recovery of coordination and
balance.
SEGMENTAL AND OVERALL COORDINATION AND CONTROL FOR THE WHOLE BODY“The video shows raising of the right limb, assisted by the weight but controlled by
the person, which is able to stabilise all the other parts of the body, allowing correct
extension or elasticising of the rear muscles in the raised limb. Meanwhile, the left
limb is left resting on the leg support to allow the correct degree of bending of the hip
and knee. This is essential for better control over the stability of pelvis during dynamic
exercising workouts.” - Dr Nedda Pellegrini
177
Archimedes System
Fixed Wall Frames
AR11001 FRAME 1
This is a smaller frame to be fitted to the wall either horizontally or vertically. It
consists of two 70 cm long, coated metal tubular elements and a high-strength
steel grid with scratch-resistant plastic coating and dimensions 93.3 x 60.5 x h 7.1
cm. The grid has a diameter of 5 mm and mesh is 5 x 5 cm.
Dimensions: 103.5 x 71 x h 7.5 cm; Weight: 9 kg.
Note: FRAME 1 can be fitted to the wall at the desired height both horizontally and vertically.
AR11002 FRAME 2
This frame can be fitted to the wall either horizontally or vertically. It consists of two
200 cm long, coated metal tubular elements and a high-strength steel grid with
scratch-resistant plastic coating with dimensions 93.3 x 60.5 x h 7.1 cm. The grid
can be easily fitted in three different positions.
The frame can be upgraded by fitting up to two “standard” grids - ref. code AR11A01 or
“quick fit and removal” type grids - ref. code AR11A02. For further details, please see
the “Configuration Options” described later on.
Dimensions: 201 x 103.5 x h 7.5 cm; Weight: 19 kg.
CONFIGURATION EXAMPLE N. 1
The frame shown here consists of the following elements:
n. 1 piece AR11002 - FRAME 2
n. 2 pieces AR11A01 - STANDARD GRID
Note: Upon placing a purchase order for this type of configuration, please specify
the codes and quantities as indicated above.
AR11003 FRAME 3
This is a smaller frame for cantilevered fitting to walls. It consists of two coated metal
panels at the sides, and a high-strength steel grid with scratch-resistant plastic
coating, dimensions 93.3 x 60.5 x h 7.1 cm. The stated capacity is dependent on the
wall elements strength.
Dimensions: 103.5 x 75.5 x h 44 cm; Weight: 12 kg.
Note: If specifically requested, it is possible to configure a cantilevered frame with
more in-line grids.
178
www.chinesport.com
Fixed Ceiling Frames
Made in Italy
AR11004 FRAME 4 H
This is a smaller frame to be fitted to the ceiling. It consists of one FRAME 1 - ref.
code AR11001 with four adjustable angle brackets, and two reinforcing crossbar
elements. Again, the grid is made from high-strength steel with scratchresistant
plastic coating and dimensions are 93.3 x 60.5 x h 7.1 cm. Angle brackets allow for
adjusting the grid distance from the ceiling by 4 cm steps. This frame is intended for
ceilings that are higher than 274 cm. The stated capacity is dependent on the wall
elements strength.
Dimensions: 113 x 84.5 x h 58-102 cm; Weight: 31 kg.
AR11005 FRAME 5 H
This frame is fitted to the ceiling. It consists of one FRAME 2 - ref. code AR11002
with two additional grids, four adjustable angle brackets, and two reinforcing
crossbar elements. All parts are made from coated metal, while grids are highstrength steel with scratch-resistant plastic coating. Angle brackets allow for
adjusting the grid distance from the ceiling by 4 cm steps. This frame is intended
for ceilings that are higher than 274 cm. The stated capacity is dependent on the
wall elements strength and how load is distributed across the three grids.
Dimensions: 113 x 214.5 x h 58-102 cm; Weight: 51 kg.
AR11011 FRAME 4 L
This frame is similar to code AR11004, but is ideal for ceilings
between 250-270 cm high. Dimensions: 113 x 84.5 x h 30-50 cm;
Weight: 26 kg.
AR11012 FRAME 5 L
This frame is similar to code AR11005, but is ideal for ceilings
between 250-270 cm high. Dimensions: 113 x 214.5 x h 30-50 cm;
Weight: 46 kg.
4
modelli:
Models:
AR11011 - FRAME 4 L
AR11012 - FRAME 5 L
2192
2780
3220
2192
2500
2700
AR11004 - STRUTTURA 4 H
AR11005 - STRUTTURA 5 H
Models:
AR11004 - FRAME 4 H
AR11005 - FRAME 5 H
179
Archimedes System 2-sided Fixed Frames
AR11006 FRAME 6
This is an exercise frame on two work planes, to be fitted to the wall.
It consists of four 200 cm long, coated metal tubular elements,
three high-strength steel grids at the top and other connecting and
attaching elements, always made from coated metal. Also, grids
have a scratch-resistant plastic coating; dimensions are 93.3 x
60.5 x h 7.1 cm. The overall work area on the top level is about
190 x 93.3 cm.
The frame can be upgraded on its vertical side by fitting up to 3
STANDARD GRIDS - ref. code AR11A01 or QUICK FIT GRIDS - ref.
code AR11A02. Capacity can be increased up to 200 kg by fitting
n. 1 GRID REINFORCEMENT SET - ref. code AR11A04. The stated
capacity is dependent on the wall elements strength and on how load
is spread across the upper grids. For further details, please see the
“Configuration Options” described later on.
Dimensions: 237 x 103.5 x h 227.5 cm; Weight: 57 kg.
AR11007 FRAME 7
This is an exercise frame on two work planes, to be fitted to the wall.
It consists of six 200 cm long, coated metal tubular elements,
six high-strength steel grids at the top and other connecting and
attaching elements, always made from coated metal. Also, grids
have a scratch-resistant plastic coating; dimensions are 93.3 x 60.5
x h 7.1 cm. The overall work area on the top level is about 190 x
206.6 cm.
The frame can be upgraded on its vertical side by fitting up to 6
STANDARD GRIDS - ref. code AR11A01 or QUICK FIT GRIDS - ref.
code AR11A02. Capacity can be increased up to 300 kg by fitting
n. 2 GRID REINFORCEMENT SETS - ref. code AR11A04. The stated
capacity is dependent on the wall elements strength and on how load
is spread through the upper grids. For further details, please see the
“Configuration Options” described later on.
Dimensions: 237 x 202 x h 227.5 cm; Weight: 94 kg.
180
www.chinesport.com
Archimedes System 2-sided Fixed Frames
CONFIGURATION EXAMPLE N. 2
The L-frame shown here consists of the following elements:
n. 1 piece AR11006 - FRAME 6
n. 2 pieces AR11A01 - STANDARD GRID
Made in Italy
4
This type of frame is recommended whenever there is limited
operational space that needs to be optimized. Upon placing a
purchase order for this type of configuration, please specify
the codes and quantities as indicated above.
CONFIGURATION EXAMPLE N. 3
The solution proposed here is created from the following
main frames plus additional standard grids, starting from the
basic setting:
n. 1 piece AR11006 - FRAME 6
n. 2 pieces AR11002 - FRAME 2
n. 7 pieces AR11A01 - STANDARD GRID
This type of frame is also recommended when trying to
optimize the available space, as in the configuration
example n. 2.
In particular, a very similar structure to the so-called “cage”
frame was achieved, i.e. with four closed sides by using two
angular walls. Upon placing a purchase order for this type
of configuration, please specify the codes and quantities as
indicated above.
181
Archimedes System Self-supporting frames
AR11008 FRAME 8
This is a free-standing and self-supporting exercise frame on three work planes. It consists
of six 200 cm long painted metal tubular elements, three high-strength steel grids at the top
and other connecting and attaching elements, always made from painted metal. Also, grids
have a scratch-resistant plastic coating; dimensions are 93.3 x 60.5 x h 7.1 cm. The overall
work area on the top level is about 190 x 93.3 cm.
The frame can be upgraded on its vertical side by fitting up to 6 STANDARD GRIDS - ref.
code AR11A01 or QUICK FIT GRIDS - ref. code AR11A02. Capacity can be increased up to
200 kg by fitting n. 1 GRID REINFORCEMENT SET - ref. code AR11A04. The stated load is
dependent on how load is spread across the upper grids. For further details, please see the
“Configuration Options” described later on.
Dimensions: 237 x 103.5 x h 227.5 cm; Weight: 77 kg.
AR11009 FRAME 9
This is a free-standing and self-supporting exercise frame on three work planes. It consists of nine 200 cm long painted metal tubular elements, six high-strength steel grids
at the top and other connecting and attaching elements, always made from painted
metal. Also, grids have a scratch-resistant plastic coating; dimensions are 93.3 x 60.5 x
h 7.1 cm. The overall work area on the top level is about 190 x 206.6 cm.
The frame can be upgraded on its vertical side by fitting up to 12 STANDARD GRIDS ref. code AR11A01 or QUICK FIT GRIDS - ref. code AR11A02. Capacity can be increased up to 300 kg by fitting n. 2 GRID REINFORCEMENT SETS - ref. code AR11A04.
The stated load is dependent on how load is spread across the upper grids. For further
details, please see the “Configuration Options” described later on.
Dimensions: 237 x 202 x h 227.5 cm; Weight: 125 kg.
SELF-SUPPORTING FRAME WITH COUCH
AC0097.W ? FIXED-HEIGHT COUCH
Option to order an additional frame with a two-section couch to be attached to a
self-supporting frame type AR11008, AR11009, AR11010. The couch is fitted at a
height of 78 cm, the two sections have a standard length of 68 cm, and the head
section can be adjusted upwards to up to 45°. This module can also be bought
at a later stage and includes any necessary hardware. The upholstery colour of
the couch has to be choosen among options as presented below. When ordering,
please remember to always add the identification code for the upholstery color
along with the module code. Working safety load of 200 kg.
? CHOICE OF UPHOLSTERY COLOR - Important: always specify the upholstery code along with the chosen item when this option is available.
A
182
N
8
7
K
S
B
www.chinesport.com
4
T
1
6
E
Z
G
F
H
9
Q
R
2
3
L
M
P
Self-supporting frames
AR11010 FRAME 10
This is a free-standing and self-supporting exercise frame on
four work planes. It consists of twelve 200 cm long, coated
metal tubular elements, six high-strength steel grids at the top
and other connecting and attaching elements, always made
from coated metal. Also, grids have a scratch-resistant plastic
coating; dimensions are 93.3 x 60.5 x h 7.1 cm. The overall
work area on the top level is about 190 x 206.6 cm.
The frame can be upgraded on its vertical sides by fitting up
to 18 STANDARD GRIDS - ref. code AR11A01 or QUICK FIT
GRIDS - ref. code AR11A02. Capacity can be increased up to
300 kg by fitting n. 2 GRID REINFORCEMENT SETS - ref. code
AR11A04. The stated capacity is dependent on how load is
spread across the upper grids. For further details, please see
the “Configuration Options” described later on.
Dimensions: 237 x 209.5 x h 227.5 cm; Weight: 158 kg.
Made in Italy
4
CONFIGURATION EXAMPLE N. 4
The frame shown here is the most complex and is universally
recognized as “CAGE FRAME”, as it consists of three sides
and a top level.
In such case, the configuration also provides for two reinforcement element sets to increase the safe working load up to
300 kg. It consists of the following main and additional frame
elements:
n. 1 piece AR11010 - FRAME 10
n. 18 pieces AR11A01 - STANDARD GRID
n. 2 pieces AR11A04 - REINFORCEMENT GRID SET
In this case, the frame is configured with a standard number
of grids closing off the three vertical sides, but it is equally
possible to opt for partial closing by simply reducing the
number of additional grids on order. Please remember that
quick fit/removal grids can also be used in alternative. As
another possible alternative for a frame with four closed work
planes; please see the configuration example n. 6 on the
following page.
183
Archimedes System Configuration Options
AR11A01 STANDARD GRID
The grid is made from high-strength steel 5 mm diameter bar mesh with scratchresistant plastic coating and 5 x 5 cm mesh. It can be easily fitted to any frame
configured with the specific hardware supplied as standard. Wall or ceiling frames or
frames with two or more work planes, either attached to the wall or self-supporting,
already use this type of grid as a standard configuration for upper horizontal planes
and only for this type of grids, thus ensuring the stated safe working loads. More
grids can be ordered to upgrade the frame onto vertical work planes.
For an indication on the number of grids that may be added to each type of frame,
please refer to the specific presentation in this section of the catalogue.
Dimensions: 93.3 x 60.5 x h 7.1 cm; Weight: 5 kg.
Pulley Therapy exercise in a supine position on a postural table M.I.T.O.
with associated exercise ball. This requires the user’s full participation.
AR11A02 QUICK FIT GRID
This grid has the same characteristics as item code AR11A01, except for the system
attaching the grid to the frame, which does not require any tools for fastening. The
standard supply includes four special stainless steel bolts for quick fit and/or removal. It can only be attached to the vertical sides of the chosen frame, as an alternative
or in combination with other standard grids.
Dimensions: 93.3 x 60.5 x h 7.1 cm; Weight: 5 kg.
QUICK FIT GRID AR11A02 - The video shows how you can easily change the
grid position along the frame’s vertical sides of our ARCHIMEDE Pulley Therapy
frames using the special pins included.
184
www.chinesport.com
Configuration Options
Made in Italy
AR11A04 GRID REINFORCEMENT SET
It is an assembly of four elements that are attached to the frame on the top horizontal plane
so exercises - or more general activities - can be performed with greater safe working loads
than those stated as standard.
If needs be, the professional may request one or two of these reinforcement sets depending on whether the frame is single or double - either at the time of ordering or at
a later time. The group of elements is supplied along with specific hardware so they are
secured to the main frame. Please refer to the presentation on the frame configurations in
this section of the catalogue.
Dimensions: 98.3 x 7 x h 9 cm; Weight: 2.4 kg.
4
Example of exercises using rep cords to strengthen the abductor muscles.
The circuit is created with a standard pulley - code 07950 plus an ankle
support 2 - code AC0576.
About Pulley Therapy
TYPE OF APPLICATIONS:
• Suspension of a segment;
• Suspension of a number of segments;
• Gravity-assisted movements;
• Movements against resistance;
• Isometric contractions;
• Isotonic contractions;
• Eccentric contractions;
POSSIBLE OBJECTIVES:
• Elongation and strengthening, to attain
myotensive balancing of the muscle groups;
• Restoration of the normal joint range;
• Execution of coordinated movements to
improve the neuromotor system;
SUSPENSION OF A SEGMENT - “When lying on the side, the therapist checks the correctness of the position, which must be with the chest perpendicular to the plane,
and therefore without rotary compensation. Connecting a rep cord to the ankle makes various exercises possible. The figure shows an oscillating movement on a plane
parallel to the couch”. - Extract from the Basic Course by Dr. Nedda Pellegrini.
185
Archimedes System Configuration Options
AR11A06 LONG BAR 200
This 200 cm long metal tubular element is universal, i.e. it is used as a base
element for many of the frame configurations described here, whether fixed or selfsupporting. It can also be ordered separately to upgrade or create other frames as in
configuration example n. 5.
In particular, two of these structural elements are required to attach a grid. The
element is designed for use with up to a maximum of three grids. Alternatively,
the same fixed or quick fit type grid can be easily re-positioned into three different
predetermined positions, depending on the exercise to be performed or the user’s
specific requirements.
Dimensions: 201 x 5 x 5 cm; Weight: 7 kg.
AR11A18 CONNECTING SET 2
It consists of two connecting elements at a 90° angle that must be used with a
FRAME 2 – ref. code AR11002 , and additional standard or quick fit-type grids if
required – ref. codes AR11A01 or AR11A02 (up to a maximum of three grids). This
setting allows for creating an additional vertical work plane for FRAME 8 or FRAME
9, while providing additional stability to the main frame to which it is attached. The
additional exercise area at the side can therefore range from a minimum of 93.3 x
60.5 cm (with one grid) to a maximum of 190 x 93.3 cm (with three grids). Finally, it
is worth pointing out that, if attached to FRAME 9 together with the elements detailed
above, the “connecting set” also provides an alternative to the so-called “cage
frame” previously identified as FRAME 10. (Please see configuration example n. 6)
Dimensions: 124 x 22.3 x 47 cm; Weight: 2.3 kg.
Note: The set can be ordered at the time of purchasing the main frame, or at a
later time together with the other components.
AR11A19 CROSSBAR
This lateral crossbar element can be attached to the vertical side of a standard
frame with at least two work planes - see FRAME 6 - 7 - 8 - 9 - 10. This
configuration provides an alternative to using one grid, which increases the frame
strength on the short side and can be used to hang straps and harnesses.
Dimensions: 102.5 x 5 x h 2.5 cm; Weight: 2.2 kg.
LEARNING A CORRECT POSTURAL CONTROL - exercises to maintain
balance on a footplate code 02600, with small movements of the
arms supported by straps - code AC0577, and an rep cords circuit.
186
www.chinesport.com
Configuration Options
CONFIGURATION EXAMPLE N. 5
The configuration shown here uses two available walls,
one supporting the L-frame and the other one as a vertical
support/work side, by applying another special frame. It
therefore consists of the following structural and optional
elements:
Made in Italy
4
n. 1 piece AR11006 - FRAME 6
n. 1 piece AR11002 - FRAME 2
n. 1 piece AR11A06 - LONG BAR 200
n. 8 pieces AR11A01 - STANDARD GRID
This type of frame is also recommended when trying to
optimize the available space, as in configuration examples n.
2 and 3 previously described. However, the difference lies in
a greater work surface provided by a second series of three
grids attached to the back wall by adding one single tubular
element identified as 200 CM LONG BAR.
Note: Upon placing a purchase order for this type of
configuration, please specify the codes and quantities as
indicated above.
CONFIGURATION EXAMPLE N. 6
The frame shown here is a variation of the so-called
“CAGE FRAME” previously identified as configuration n.
4, which is made up of three sides and an upper plane. In
particular, the key difference is that one side is closed off
by means of a CONNECTING SET 2 – ref. code AR11A18
and that a FRAME 2 – ref. code AR11002 is used. In
addition, in the configuration shown here the standard
grids are not used to fully close the vertical sides. Finally,
the safe working load is increased up to 300 kg by fitting
the two reinforcement element sets.
Therefore, the frame consists of the following structural
and optional elements:
n. 1 piece AR11009 - FRAME 9
n. 1 piece AR11002 - FRAME 2
n. 1 piece AR11A18 - CONNECTING SET 2
n. 11 pieces AR11A01 - STANDARD GRID
n. 2 pieces AR11A04 - REINFORCEMENT GRID SET
Please remember that quick fit/removal grids can also be
used in alternative.
MAXIMUM EXERCISE LOAD UP TO
187
Archimedes System Straps and supports
COORDINATION - HEAD MOVEMENTS: “The therapist guides the sideways bending movement of the head. With one hand they block the SIAS to immobilise the pelvis. The
legs are suspended to relieve the lombo-sacral section of any load. Mobilisation of the cervical spine also involves the dorsal section.” “Hooking the PT circuit to the ankles
does not only relieve load from the lower limbs and the spine, but it serves to make coordinated movements that alternate with mobilisation of the cervical spine in a
completely load-free state. This hook can be replaced by a leg support on a cube, on a ball, elongated on the couch plane, etc., depending on the goal to be achieved”. Extract from the Basic Course by Dr. Nedda Pellegrini
AC0055 SMALL STRAP
AC0056 MEDIUM STRAP
AC0295 LARGE STRAP
AC0296 EXTRA LARGE STRAP
AC0297 CERVICAL STRAP
AC0300 FOOT STRAPS
Padded strap with black synthetic leather lining
and 35 mm diameter chromed rings at the ends.
Comfortable and easy to disinfect, it provides support
to lower/upper limbs. (single item)
Dimensions: 44 x 12 x 1.5 cm; Weight: 120 g.
Padded strap with black synthetic leather lining
and 35 mm diameter chromed rings. Comfortable and
easy to disinfect, it is recommended as a support and
lift for trunk/pelvis. (single item)
Dimensions: 110 x 24 x 1.5 cm; Weight: 330 g.
188
www.chinesport.com
Padded strap with black synthetic leather lining and 35
mm diameter chromed rings at the ends. Comfortable
and easy to disinfect, it provides support to lower/upper
limbs or to keep the head suspended. (single item).
Dimensions: 69 x 12 x 1.5 cm; Weight: 170 g.
Strap recommended as a support and lift for the head
and for traction exercises. Chromed rings at the ends
have a diameter of 35 mm. (single item)
Dimensions: Length 74 x 10 x 1.5 cm; Weight: 140 g.
Padded strap with black synthetic leather lining
and 35 mm diameter chromed rings. Comfortable and
easy to disinfect, it is recommended as a support and
lift for trunk/pelvis. (single item)
Dimensions: 92 x 12 x 1.5 cm; Weight: 200 g.
Padded foot straps with semi-rigid sole and three
support areas - lower, back and top/front, they
comfortably adapt to any foot shape. Chromed rings
have a diameter of 20 mm. There are three Velcro
fastenings/adjustments. (for the pair)
Dimensions: 55 x 35 x 1.5 cm; Weight: 900 g.
Straps and supports
Made in Italy
4
AC0059 ANKLE SUPPORT 1
AC0060 WRIST SUPPORT
AC0577 PERFORATED STRAP
Padded strap with black synthetic leather lining and 4
rings, comfortable and easy to disinfect. It can also be
used as an ankle support or to keep limbs suspended.
(single item). Dimensions: 50 x 23 x 1.5 cm.
AC0576 ANKLE SUPPORT 2
AC0303 SMALL CYLINDRICAL SUPPORT
AC0304 LARGE CYLINDRICAL SUPPORT
Padded strap with black synthetic leather lining and a
chromed ring; it is fastened with high resistant Velcro
adjustable strap. Comfortable and easy to disinfect.
(single item). Dimensions: 26 x 9 x 1.5 cm (closed).
Semi-rigid support with anti-bacterial and anti-mite
synthetic leather lining, removable and easy to
disinfect. It is supplied with an inner strap provided
with two 20 mm diameter chromed attachment rings.
Recommended to support the knee when suspended
or provide support to the cervical area. (single item)
Dimensions: ø 10 cm x length 36 cm; Weight: 700 g.
Padded strap with black synthetic leather lining and a
chromed ring; it is fastened with high resistant Velcro
adjustable strap. Comfortable and easy to disinfect.
(single item). Dimensions: 23 x 7 x 1.5 cm (closed).
Padded strap with black synthetic leather lining and
2 chromed rings, it is fastened with Velcro strap.
(single item). Dimensions: 31 x 29 x 2 cm (closed).
Semi-rigid support with anti-bacterial and anti-mite
synthetic leather lining, removable and easy to
disinfect. The ends have two rings cast together with
the manual attachment rope support. Recommended in
dorsal spine mobilization exercises. (single item)
Dimensions: ø 15 cm x length 64 cm; Weight: 1.2 kg.
COORDINATION – COMBINED MOVEMENTS
“The entire spinal column can be mobilised by
suspending the head and truck using a strap, and
positioning the hands with the fingers interlocked to
guide the movement of the head.”
- Extract from the Basic Course by Dr. Nedda Pellegrini.
Note: A SET OF STRAPS - code AC0325, , as shown in the picture, can be ordered. Please see the type and quantities suggested on the following page.
189
Archimedes System Handles
07930 HANDLE 1
Plastic handle with a chromed metal open ring for
quick attachment. It can be used during suspension or
strengthening exercises. (single item)
Dimensions: 18 x 14 x 4 cm; Weight: 170 g.
AC0298 HANDLE 2
30 mm diameter handle with non-slip rubber grip, with
35 mm diameter chromed attachment ring. It can be
used during suspension or strengthening exercises.
(single item). Dimensions: 22 x 16 x ø 3 cm; Weight:
100 g.
AC0299 HAND-WRIST-ANKLE STRAP
Strap indicated for use during suspension or
strengthening exercises or as ankle support.
Completed by a 35 mm diameter chromed attachment
ring. (single item). Dimensions: 33 x 5 x 1.5 cm;
Weight: 50 g.
07970 HANDLE 3
Plastic handle with chromed metal construction and
five 30mm diameter attachment rings. It can be used
as support handle with the option to change user
stability by increasing or reducing the attachment
points. (single item). Dimensions: 21 x 19 x ø 3 cm;
Weight: 370 g.
BALANCE ON A EXERCISE BALL AND ARM PT
“This exercise implies greater control of the body and forces
correct balancing reactions. Note the position of the body
on the vertical. The stretch on the left side is achieved by
elongating the same arm and leg”
Extract from the Basic Course by Dr Nedda Pellegrini
BALANCING ON AN EXERCISE BALL AND PULLEY
THERAPY FOR ARMS - “Exercises in a seated position on
a ball, which is an unstable surface, are aimed to
stimulate balance reactions and create a control of the
body that is segment by segment as well as global.
Also, these exercises enhance perceptual qualities
and coordination, as they can be performed moving two
sections of the body simultaneously. - Extract from the
Basic Course by Dr Nedda Pellegrini.
Note: A SET OF HANDLES - code AC0326, , as shown in the picture, can be ordered. Please see the content by type and quantities suggested on the following page.
190
www.chinesport.com
Archimedes System Other accessories
Made in Italy
07950 STANDARD PULLEY
Basic element to be used in combination
with snap hook code AC0094 to
configure the exercises. The pulley can be
rotated so it can be used in any direction.
(single item)
Dimensions: 10 x 5 x 2.5 cm;
Weight: 84 g.
4
AC0294 PLUS PULLEY
Basic element with snap hook
included and possibility of rotation.
This device also helps the therapist
save time when performing practical
configuration activities for an exercise,
as the rope can be pulled off while in
use without removing the equipment that
is attached to it. (single item)
Dimensions: 15.5 x 6 x 4 cm;
Weight: 105 g.
AC0293 ROPE STOPPER
This item is useful to adjust the rope
length, once equipped with the required
accessories, depending on the exercise
to perform; adjustments are made by the
therapist easily and quickly without having
to tie up the rope in different positions
manually. (single item)
Dimensions: 9 x 4 x 2 cm; Weight: 45 g.
AC0301 SPACER
This is a metal element with plastic
coating that can be fitted to a grid in
vertical position. It allows for the pulley
to be separated from the grid while it is
sliding, and this prevents contact and
rubbing between rope and frame during
use. (single item)
Dimensions: 11 x 7 x h 6.5 cm
Weight: 300 g.
BALANCE ON A EXERCISE BALL AND ARM PT
“On the ball, the movement of opening the arms is
associated with rocking forwards with the torso.”
Extract from the Basic Course by Dr Nedda Pellegrini
Note: A SET OF TOOLS - code AC0327, as shown in the picture, can be ordered. Please see the type and quantities suggested on the following page.
191
Archimedes System Other accessories
REP CORDS
A medium resistance elastic tubing
available in two different lengths
(recommended). Lattice free and odorless.
A tube with different degrees of resistance
- five planes - is also available. Please see
the appropriate section of the catalogue
for this. Supplied as a package.
31220 7.6 M REP CORD
31300 30.5 M REP CORD
AC0292 PLASTIC CLAMPS FOR REP CORD
This device allows for a rep cord to be properly secured to the snap hooks or directly
to the equipment attachment ring, saving the therapist’s time when setting up the
exercise. (two items)
Dimensions: 3 x 3.5 x 2 cm; Weight: 20 g.
STARTING POSITION PATIENT SEATED WITH STRAPS
“The patient is asked to control the state of relaxation of their shoulders.
In this position they can make movements to free up the joint with
a controlled excursion, and learn to keep the spine upright.”
Extract from the Basic Course by Dr Nedda Pellegrini.
192
www.chinesport.com
COORDINATION - DOUBLE SUSPENSION:
“Short oscillating movements can be made by
alternating the head and the legs. This has the effect
of freeing up and mobilising the entire spine.”
Extract from the Basic Course by Dr Nedda Pellegrini.
Other accessories
Made in Italy
07920 S-SHAPED HOOK
Basic multi-purpose element, can be used
to configure exercises with pieces of equipment that
do not require a closed attachment ring; it can also be
used to be hooked directly to the grid.
(single item).
Dimensions: 5 x 2.5 x ø 0.5 cm; Weight: 15 g.
4
AC0094 SNAP HOOK
Basic multi-purpose element, used to safely link
the grid / frame and the various pieces of
equipment (accidental detachment is
impossible). It is used, for example, along with the
STANDARD PULLEY - ref. code 07950 for hooking
the latter directly to the grid, or using a strap.
Dimensions: 7 x 3.5 x 0.7 ø cm.
Weight: 25 g.
BAGS
Bags have synthetic leather lining and a 35 mm
diameter attachment ring. They are available in
six different weights. They are supplied as single
items.
08035 – BAG 0.5 KG
08045 – BAG 1 KG
08055 – BAG 2 KG
08065 – BAG 3 KG
08075 – BAG 4 KG
08085 – BAG 5 KG
THERAPY PULLEY
CIRCUITS
A set of 30 metres of special rope can be ordered
as a standard item in order to set up various work
circuits, or the number of metres you prefer. The
relevant codes are as indicated below. Circuits
can also be formed with th elastics.
07980 ROPE PER METRE
Nylon rope. Sold by the metre.
07981 30 M ROPE SET
Basic element - 30 m long nylon rope.
Note: A SET OF WEIGHT BAGS - code AC0077, as shown in the picture, can be ordered. Please see the content by type and quantities suggested on the following page.
193
Archimedes System Other accessories
PELVIC HARNESSES
Padded harnesses in different sizes with gray synthetic
leather lining and Velcro fastening strap. They also have
a belt with an adjustable metal buckle for attachment to
a multi-purpose rope. Recommended for lumbar selftraction exercises. It is supplied as a single item.
AC0323 SPREADER BAR
Metal construction with three 1.2 cm diameter
attachment rings for use with other accessories by
means of snap hooks (ref. code AC0094). Please see
the examples in the pictures previously shown in this
section. Dimensions: 35 x 7 x 0.5 cm;
Weight: 135 g.
09420 PADDED CHIN STRAP
This support restrains the head while performing
cervical traction exercises. It is reinforced and has
Velcro fastenings. Supplied together with metal
spreader bar ref. code AC0323.
Dimensions: 35 x 7 x 0.5 cm
Weight: 250 g.
AC0321 PELVIC HARNESS - SMALL
Dimensions: 112 x 32 x 1.5 cm. Weight: 460 g.
AC0320 PELVIC HARNESS - LARGE
Dimensions: 136 x 33 x 1.5 cm. Weight: 560 g.
AC0302 EXERCISE BAR
Coated tubular metal bar with 3 rings for attachment
to a rope and other accessories through a snap hook
(ref. code AC0094), depending on the exercise set up
by the therapist. The attachment rings can also be
moved along the bar in three other positions. (single
item); Dimensioni: cm 111 x 11,5 x 4; Peso: Kg 2.
194
www.chinesport.com
Archimedes System Accessory sets
Made in Italy
Chinesport recommends the following items as
a basic equipment for a pulley therapy exercise
station - they are divided by type and quantity,
according to homogeneous groups:
4
AC0325 SET OF STRAPS
Set of n. 11 straps as per following list:
n. 5 pcs AC0055; n. 2 pcs AC0056;
n. 1 pc AC0295; n. 1 pc AC0296,
n. 1 pc AC0297; n. 1 pc AC0300.
Note: other straps are available separately and item
codes are AC0059, AC0060, AC0577, AC0576.
AC0326 SET OF HANDLES
Set of n. 6 different type handles for exercises and
various applications. In particular, the set consists of
n. 2 pcs AC0298; n. 2 pcs AC0299;
n. 1 pc 07970; n. 1 pc 07930;
AC0327 SET OF ACCESSORIES
Set of n. 9 types of items in the following
quantities:
n. 8 pc 07950; n. 1 pc AC0294;
n. 4 pcs AC0293; n. 1 pc AC0301;
n. 1 pc 07981; n. 1 pc 31220;
n. 2 pcs AC0292; n. 10 pcs 07920,
n. 10 pcs AC0094.
AC0077 SET OF BAGS
Set of n. 6 different weight bags with 35 mm
diameter chromed attachment ring. Weights are
0.5-1-2-3-4-5 kg.
AC0328 FULL SET
It consists of 1 piece for each group of available
items, i.e. straps, handles, weights and other
accessories required to set up the exercises.
07955 PULICAR TROLLEY
Coated steel trolley with two shelves with
riased edges. It has a handle and swiveling
castors for transport. Bags can be hung on the
three pegs fitted to a bracket.
Dimensions 65 x 45 x 95 h cm.
195
Pulley Therapy
Ercolina
07405 ERCOLINA SINGLE
Equipment designed to perform counter-resistance
strengthening exercises for upper and lower limbs.
Exercises can be performed in all directions, either standing
or seated, and with limited variable loads applied by means
of weights. It also gives you the option of adjusting and
locking the pulley in any intermediate position along the
whole frame length up to 220 cm.
An exercise manual is included, with suggested uses
in various modes: in an upright position or seated, or with
various accessories.
Adjustment is very easy and doesn’t require any tools, as
there is simply a sliding action along a chromed bar. The
frame is made from coated steel and intended for use as
a wall-mounted application. It is supplied with a set of 10
weights of 1 kg each and one weight of 0.5 kg.
Fasteners are included. Dimensions: 20 x 33 x h 220 cm
Weight: 12 kg
Note: Lower limbs exercises can also be performed
by adding accessories AC0094 – SNAP HOOK and
AC0059 ANKLE SUPPORT 1.
Certificazione richiesta dalla Comunità
Europea e riconosciuta a livello
Internazionale
02110.CD
CD-ROM ERCOLINA/POLIERCOLINA
An exercise manual is included in a CD support,
with suggested uses in various modes: in an upright
position or seated, or with various accessories. (please
see the exercise example shown on the next page).
ACCESSORIES
For upper limbs exercises
AC0302 EXERCISE BAR
Coated tubular metal bar with 3 rings for
attachment to a rope and other tools through a
snap hook (ref. code AC0094), depending on the
exercise set up by the therapist. The attachment
rings can also be moved along the bar in three
other positions. Recommended for
lumbar self-traction exercises. (single item);
Dimensions: 111 x 11.5 x 4 cm; Weight: 2 kg
196
www.chinesport.com
AC0094 SNAP HOOK
AC0298 HANDLE 2
AC0299 HAND-WRIST-ANKLE STRAP
AC0060 WRIST SUPPORT
AC0302 EXERCISE BAR
For lower limbs exercises
AC0094 SNAP HOOK
AC0059 ANKLE SUPPORT 1
For exercises in a seated position
04820 BENCH
04840 GINNY BENCH
04850 PIVETTA BENCH
Pulley Therapy Ercolina
Made in Italy
4
ACCESSORIES
04820 BENCH
Coated steel construction, padded board
and synthetic leather lining.
Dimensions: 60 x 30 x h 42 cm.
04840 GINNY BENCH
Coated steel construction, padded board
and synthetic leather lining. Adjustable
backrest.
Dimensions: 120 x 30 x h 42 cm.
AC0298 HANDLE 2
AC0299 HAND-WRIST-ANKLE AC0059 ANKLE SUPPORT 1
30 mm diameter handle with non-slip
rubber grip, with 35 mm diameter
chromed attachment ring. Can only be
used with accessory AC0094 – SNAP
HOOK. (single item).
Dimensions: 22 x 16 x ø 3 cm.
Weight: 100 g.
STRAP
Strap indicated for use during suspension
exercises or as ankle support. Completed by
a 35 mm diameter chromed attachment
ring. Can only be used with accessory
AC0094 – SNAP HOOK. (single item).
Dimensions: 33 x 5 x 1.5 cm; Weight: 50 g.
04850 PIVETTA BENCH
Coated steel construction, padded board
and synthetic leather lining.
Dimensions: 128 x 28/23 x h 42 cm.
Padded strap with a black synthetic
leather lining with a chromed ring.
Comfortable and easy to disinfect. (single
item).
Dimensions: 26 x 9 x 1.5 cm (closed).
AC0094 SNAP HOOK
Basic multi-purpose element, used to
safely link the grid / structure and the
various pieces of equipment (accidental
detachment is impossible).
Dimensions: 7 x 3,5 x 0,7 ø cm;
Weight: 25 g.
AC0060 WRIST SUPPORT
Padded strap with a black synthetic
leather lining with a chromed ring; it
is fastened with high resistant Velcro
adjustable strap. Comfortable and easy to
disinfect. (single item).
Dimensions: 23 x 7 x 1.5 (closed).
Exercise 1 FRONTAL ADDUCTION
1 - Starting position:
Upright, in front of the Ercolina. Upper
limb in front and raised, in a long
position, gripping the handle located in
the upper area;
2 - Execution
Pull the handle downwards
keeping the limb positioning
unaltered.
RECOMMENDED METHOD: With a Ginny bench - accessory code 04840
197
Pulley Therapy
Poliercolina
07415 POLIERCOLINA
Equipment designed to perform counter-resistance strengthening exercises for upper and
lower limbs. Exercises can be performed in all directions, either standing or seated, and
with limited variable loads applied by means of weights. In particular, the user can be
requested to exercise both upper limbs while performing specific exercises. It also gives
you the option of adjusting and locking the pulleys in any intermediate position along
the whole frame length up to 220 cm. An exercise manual is included, with suggested
uses in various modes: in an upright position or seated, or with various accessories (see the
sample exercise shown on the page next to this one). Adjustment is very easy and doesn’t
require any tools, as there is simply a sliding action along chromed bars. A wall bar is
also supplied, offering further exercise options. The frame is made from coated
steel and intended for use as a wall-mounted application. It is supplied with a set of 20
weights of 1 kg each and 2 weights of 0,5 kg. Fasteners are included. Dimensions: 122
x 33 x h 220 cm; Weight: 74 kg.
Certificazione richiesta d
Europea e riconosciuta a
Internazionale
ACCESSORIES
For upper limbs exercises
AC0302 EXERCISE BAR
Coated tubular metal bar with 3 rings for
attachment to a rope and other tools through a
snap hook (ref. code AC0094), depending on the
exercise set up by the therapist. The attachment
rings can also be moved along the bar in three
other positions. Recommended for
lumbar self-traction exercises. (single item);
Dimensions: 111 x 11.5 x 4 cm; Weight: 2 kg.
198
www.chinesport.com
AC0094 SNAP HOOK
AC0298 HANDLE 2
AC0299 HAND-WRIST-ANKLE STRAP
AC0060 WRIST SUPPORT
AC0302 EXERCISE BAR
For lower limbs exercises
AC0094 SNAP HOK
AC0059 ANKLE SUPPORT 1
For exercises in a seated position
04820 BENCH
04840 GINNY BENCH
04850 PIVETTA BENCH
04720 ABDOMINAL BENCH
Pulley Therapy Poliercolina
Made in Italy
4
ACCESSORIES
04820 BENCH
04840 GINNY BENCH
AC0298 HANDLE 2
AC0299 HAND-WRIST-ANKLE AC0059 ANKLE SUPPORT 1
Coated steel construction, padded board and
synthetic leather lining.
Dimensions: 60 x 30 x h 42 cm.
30 mm diameter handle with non-slip rubber
grip, with 35 mm diameter chromed attachment
ring. It can only be used with accessory
AC0094 – SNAP HOOK. (single item)
Dimensions: 22 x 16 x ø 3 cm
Weight: 100 g.
Coated steel construction, padded board and
synthetic leather lining.. Adjustable backrest.
Dimensions: 120 x 30 x h 42 cm.
STRAP
Strap indicated for use during suspension
exercises or as ankle support. Completed by a
35 mm diameter chromed attachment ring.
(single item). Dimensions: 33 x 5 x 1.5 cm
Weight: 50 g.
AC0094 SNAP HOOK
Basic multi-purpose element, used to safely
link the grid / structure and the various
pieces of equipment (accidental detachment is
impossible). Dimensions: 7 x 3.5 x 0,7 ø cm;
Weight: 25 g.
04850 PIVETTA BENCH
Coated steel construction, padded board and
synthetic leather lining.
Dimensions: 128 x 28/23 x h 42 cm.
Padded strap with a black synthetic leather
lining with a chromed ring. Comfortable and
easy to disinfect (single item).
Dimensions: 26 x 9 x 1.5 cm (closed).
04720 ABDOMINAL BENCH
Coated steel construction, padded board and
synthetic leather lining. Adjustable foot
support; a cervical cushion is supplied.
Dimensions: 196 x 32 x h 32 cm.
AC0060 WRIST SUPPORT
Padded strap with a black synthetic leather
lining with a chromed ring; it is fastened
with high resistant Velcro adjustable strap.
Comfortable and easy to disinfect.
(single item)
Dimensions: 23 x 7 x 1.5 cm (closed).
02110.CD
CD-ROM ERCOLINA/POLIERCOLINA
An exercise manual is included in a CD support,
with suggested uses in various modes: in an upright
position or seated, or with various accessories. (please
see the exercise example shown on the next page).
Exercise 1 FRONTAL ADDUCTION, Method: POLIERCOLINA
1 - Starting position:
Upright, in front of the Ercolina. Upper limb
in front and raised, in a long position, gripping the
handle located in the upper area.
2 - Execution
Pull the handle downwards keeping the limb
positioning unaltered.
199
R.I.C. Continued Intensive Rehabilitation - Frames
This rehabilitation program makes the most of the natural physiological resources
of the human body through intense stimulation and strong motivations. The R.I.C.
rehabilitation station has been designed for the motor recovery and functional
recuperation in spinal cord injury patients through an innovative motor rehabilitation
method that is intensive, continued and personalized.
Suitable for R.I.C. Rehabilitation
RIC0100.01 R.I.C. BASIC FRAME
Motor rehabilitation station for a wide range of active exercises in various postures, also
with the addition of weights and counterweights, to stimulate muscle recruitment and
strengthening, balance, coordination and proprioception. In particular, the exercises can
also be performed while lying supine, prone, on the side, or in a seated position, on all
fours, or standing upright.
The areas to be treated can also be positioned in axial suspension to help move them
and achieve the widest possible joint ROM. Finally, each exercise can be performed with
different, personalized ranges of motion.
The frame is versatile, as the range of possible exercises would normally require to use
various equipment and consequently to move the patient. The therapist’s job is generally
made easier. Dimensions 298 x 121 x 225 h cm.
Standard configuration includes:
Adjustable bar
Movable crossbar (for sides)
Swivel pulley
Bobath feet-side fitting
Bobath head-side fitting
Upper longitudinal member
Frame
Movable upper crossbar
Loading cells unit
Articulated footplate (for the pair)
R.I.C. quick coupling handle
30 cm Chain kit
200
2 pcs
2 pcs
6 pcs
2 pcs
2 pcs
1 pc
2 pcs
1 pc
1 pc
12 pcs
2 pcs
2 pcs
110 cm Chain kit
Bar with R.I.C. hook
Set of leather items
Pulley therapy handle
Pillow code 09600
Pillow code 09620
Pillow code 11250
Quick release pins (additional)
Quick release pins for chains (add.)
S-shaped hook
Snap hooks
“Alboland” transfer straps
www.chinesport.com
4 pcs
1 pc
1 pc
2 pcs
2 pcs
1 pc
1 pc
2 pcs
2 pcs
8 pcs
10 pcs
2 pcs
Certificazione richiesta
Europea e riconosciuta
Internazionale
TO ORDER:
the basic frame must be ordered along with a special treatment table type
Bobath and can be used in combination with a standing frame for exercises
in the upright position (code AC 0100.01). The station is provided with a
series of basic elements and can be expanded with accessories.
Bobath Line
Therapy tables
Made in Italy
4
Pos. 3 - 4 - 5 Type of sections
432 BOBATH S RIC 120
+90°
40
65
135
120
200
472 BOBATH S RIC TREND 120
+90°
40
L B
65
135
120
1
2
3
4
5
6
7
8
9
200
Model shown - code LB 432 A2 W3
Suitable for the
Pos. 6 Height adjustment
For model LB432 only
D Electric, with hand control
For model LB472 only
F Electric, two motors with hand control
Pos. 7 Other options
1 No options
2 With wheels for transportation
3 Safety siderails
4 Wheels and siderails
TECHNICAL FEATURES
Number of sections
Max safety load (kg)
Height adjustment
Minimum/maximum table height (cm)
Mains supply
Actuator thrust (N)
IP Protection
Head section adjustment
Head section tilt
Wheels diameter (mm)
Braking system
Upholstery safety rating
Padding thickness (mm)
Density (kg/m³)
Weight (kg)
Pos. 8 Synthetic leather design
W Seamless rounded edges
Pos. 9 Section upholstery color
24 options available
Configuration
example for a
treatment table
from the VISIT
range.
4
250
Electric
47-97
220V 50-60Hz / 24V 70VA
10000
54
Gas spring-assisted
90°
65
Central
1 IM
30
30
98 / 108
ACCESSORIES:
ELECTRICAL ACCESSORIES:
AC0037 ADDITIONAL FOOT SWITCH 1
AC0038 ADDITIONAL FOOT PEDAL 2 *
AC0039 ADDITIONAL HAND CONTROL 1
AC0040 ADDITIONAL HAND CONTROL 2 *
AC0083 ADDITIONAL CONTROL 1
AC0575 FOOT SWITCH HOLDER
AC0578 SAFETY DEVICE
FOR PROTECTION AND HYGIENE:
AC0035 MAXI PAPER ROLL SET
CUSHIONS FOR POSTURE:
Refer to the first pages
* IMPORTANT NOTE: accessories AC0038 and AC0040 are only available for
model LB 472
upholstery
color code
A
N
8
7
K
S
B
4
T
1
6
E
Z
G
F
H
9
Q
R
2
3
L
M
P
201
R.I.C. Continued Intensive Rehabilitation - Frames
AC0100.01 R.I.C. STANDING FRAME
With this standing frame the patient can reach the upright position aided by the
therapist. This equipment was conceived for use in combination with the basic
frame code RIC 0100.01, thus widening the range of possible exercises in this
posture too.
It is provided with a series of supports so the patient can maintain an erect posture,
with support elements for the arms and restraints for the pelvis and trunk, to be
used on a case by case basis. A further upper support for the arms is also available
for order under accessory code AC0119.
The footplate features a special foot restraint system that allows moving each
foot forwards and sideways independently and according to the exercise to be
performed. This device can also be excluded through a lateral rotation adjustment
which gives the patient in erect posture a wider range of movement with the lower
limb in abduction and along the antero-posterior axis. The footboard is provided
with a small castor to move the equipment more easily.
Dimensions 120 x 121 x 225 h cm.
Standard Configuration
Lower base
Horizontal foot system
Adjustable bars system
Movable crossbar for sides
Central column
Pusher assembly
Arm support set
Knee pad set
Harness hooks
Castors
Restraining strap for torso
Pelvic harness
Adjustable bar
1 pc.
2 pcs.
2 pcs.
1 pc
1 pc
1 pc
1 pc
1 pc
2 pcs.
1 pc
1 pc
1 pc
2 pcs.
ACCESSORY SPECIFIC TO THE STANDING FRAME
AC0119 HAND GRIP SUPPORT
Suitable for R.I.C. Rehabilitation
202
www.chinesport.com
It can be fitted on the standing frame
code AC0100.01 to provide further
support to the upper limbs when
deemed appropriate. The accessory that
rotates nearer/farther from the patient is
only suitable for tetraplegic patients.
R.I.C. Continued Intensive Rehabilitation - Accessories
Made in Italy
COMMON ACCESSORIES FOR THE R.I.C. MOTOR REHABILITATION STATION
The R.I.C. motor rehabilitation station can be easily integrated with other accessories to widen the range of possible exercises or simplify the therapist’s work.
AC0101 ADJUSTABLE BAR
This is a basic element that can be fitted with other
accessories to perform various exercises. Please note
that the standard supply for the basic frame - already
includes 2 pieces, and 2 pieces are supplied with
the standing frame - code AC0100.01.
AC0102 MOVABLE CROSSBAR FOR SIDES
This is a basic element that can be fitted with other
accessories to perform various exercises. Please
note that the standard supply for the basic frame already includes 2 pieces, and 1 piece is included in
thestanding frame - code AC0100.01.
AC0103 SWIVEL PULLEY
This is a pulley that connects the body region
to be treated and the corresponding weight or
counterweight by means of a cord. In particular, it
allows for creating exercises with personalized work
angles by varying its position. As a result, it provides
the highest flexibility of application. Please note that
the standard supply for the basic frame code RIC 0100.01 - already includes 6 pieces.
AC0329 R.I.C. QUICK -RELEASE HANDLE AC0110 ARTICULATED FOOTPLATE
This can be easily fitted to the frame’s basic elements,
and it provides a safe hold while performing the
exercises. Please note that the standard supply for the
basic frame - code RIC 0100.01 - already includes 2
pieces. It can be ordered as a single item.
This articulated footplate provides support/restraint/
posture to the feet while exercising with the R.I.C.
rehabilitation station. Please note that the standard
supply for the basic frame - code RIC 0100.01 already includes 2 pieces. To be ordered as a pair.
AC0106 SLIDE SYSTEM
AC0107 VERTICAL FOOT SYSTEM
AC0112 PEDAL EXERCISER – FOR
AC0113 PEDAL EXERCISER – FOR
This is to exercise with the lower limbs in suspension,
with the patient in a clinostatic or in a seated or
semiseated position. It is fitted to the base frame by
means of the upper movable crossbar. To be ordered
as a pair.
UPPER LIMBS It enables users to exercise the upper
limbs from a clinostatic or a seated position. The pedal
exerciser must be fitted to the “adjustable bar” (ref.
code AC0101), provided this is free (i.e. not engaged in
other configurations).
4
The slide system consists of a frame with seat, two
slide rails and a movable crossbar for the sides
(ref. code AC0102). This device makes it possible
to perform all those exercises that require a seated
position on a sliding plane. We recommend using
this system together with the articulated footplates,
accessory code AC0110.
LOWER LIMBS It enables users to exercise the lower
limbs from a clinostatic or a seated position. The
accessory can only be used when fitted to another
accessory - code AC0112 Pedal exerciser for upper
limbs. It consists of two footplates and an elongated
support bar.
203
R.I.C. Continued Intensive Rehabilitation - Accessories
AC0114 FOREARM SUPPORT
It consists of a fastening system to the frame and the
respective forearm support that helps select the activity.
To be ordered as a pair.
AC0120 RESTRAINING STRAP FOR TRUNK
AC0117 SET OF HARNESSES
This restrains the patient’s trunk when using the standing
frame, either seated or standing. Please note that the
standing frame - RIC 0100.01 - already includes 1 piece.
The standard series consists of the following elements: knee supports (1 pc), cross-over support strap (1 pc),
plain support strap (1 pc), leather wrist straps (1 pair), leather ankle support (1 pair), hand gauntlet (1 pair), wris
supports (1 pair). Please note that the standard supply for the basic structure - code RIC 0100.01 - already
includes one set. It can be ordered as a set.
AC0121 QUICK RELEASE PIN
AC0122 RELEASE PIN FOR CHAINS
07930 HANDLE 1
Please note that the standard supply for the basic
frame- code RIC 0100.01 - already includes 2 pieces
Can be ordered as a single item.
09600.W ? WEDGE 1
09620.W ? WEDGE 3
11250.W ? LEG CUSHION
It can be used for securing basic elements and/or
accessories to the basic frame - code RIC 0100.01, or
to the frame - code AC 0100.01. Please note that the
standard supply for the basic frame already includes 20
pieces, and 14 pieces are supplied with the standing frame.
Please note that the standard supply for the basic
frame - code RIC 0100.01 - already includes
2 pieces 25 x 25 x 10 h cm.
Similar characteristics as the accessory code AC0121,
but designed for clipping the chains. Please note that the
standard supply for the basic frame - code RIC 0100.01
- already includes 2 pieces.
Please note that the standard supply for the basic frame
- code RIC 0100.01 - already includes 1 piece.
Dimensions 60 x 45 x 15 h cm.
Shaped pillow. Please note that the standard supply
for the basic frame - code RIC 0100.01 - already
includes 1 piece. Dimensions 77 x 50 x 20/15 h cm.
? CHOICE OF UPHOLSTERY COLOR - important: always specify the upholstery code along with the chosen item when this option is available.
A
204
N
8
7
K
S
B
www.chinesport.com
4
T
1
6
E
Z
G
F
H
9
Q
R
2
3
L
M
P
R.I.C. Continued Intensive Rehabilitation - The Method
Made in Italy
TARGET AUDIENCE: The Continued Intensive Rehabilitation (R.I.C.) is a motor rehabilitation
method that targets those individuals who are affected by neurological pathologies, and
in particular those who are neurologically or motor impaired, and those who suffer from
the outcomes of infantile cerebral palsy (I.C.P.) and cerebral hemorrhage.
4
IMPORTANT FOR ANYONE CONCERNED:
Several individuals living in various Italian regions have used
or are using the R.I.C. method at direct expense of their Local
Health Authority with or without legal action.
Video showing patients undergoing RIC
treatment according to ASIA impairment
scale under official certification.
“...We can say that the services relating to the R.I.C. rehabilitation
method fall totally within those specified by the Essential Levels of
Care (1) nationally and for the Tuscany Region... and that therefore
such services can be considered appropriate. …”
“I also confirm that the Essential Levels of Care only specify the
healthcare services on a separate basis and without determining the
duration of the care. Therefore, the L.E.A. tables will never specify
techniques or methods that cover the set of services that make up
a therapy protocol, with particular and specific times and modes of
execution that vary depending on the pathology to be treated, as
these can only be assessed by each doctor based on their expertise
and experience. Extract from: Medical-legal considerations - Ruling
from the Courts of Florence N. 254 - 16.02.05.
Note (1) - The Essential Levels of Care (Italian: Livelli Essenziali di Assistenza - L.E.A.) are the
services and assistance that the National Health Service (Servizio Sanitario Nazionale - S.S.N.) has
to provide for the citizens either for free or against a co-payment fee (so-called ticket), using the
public funding raised with general taxation.
205
R.I.C. Continued Intensive Rehabilitation - The Method
R.I.C. Exercises: they originate from the global and sequential observation of the key functions
performed by a healthy individual, as they go from a lying or a seated position to standing
(walking) and return to the starting position. Each movement is analytically subdivided
intovarious exercises; these exercises have been grouped into muscle regions and split into
training days.
About 150 exercises have been studied and developed. Each exercise can have several
variations and be performed in different postures (lying supine or prone, seated or upright, etc.),
and can be aimed at muscle recuperation/strengthening, coordination, balance or reaching more
objectives at the same time.
RESULTS ACHIEVED:
The results achieved are very encouraging and,
in summary, we can say that:
• All patients showed a marked improvement
in the international assessment scales (A.S.I.A.,
F.IM., W.I.S.C.I., Ashworth …);
• About 95% of the paraplegics and 65%
of the tetraplegics have resumed an initial
therapeutic gait with small splints under the
knee, tripod canes or walking frames and aided
by the therapist.
For many patients, the resumed gait function
can be defined as therapeutic, but, in some
cases, it can also become functional when
necessary;
• All patients have recovered some
independence in movement and personal
care by increasing their functional capabilities
depending on their impairment;
• Some patients have resumed some motor
and sensory activity under the lesion, while
others have noticed some urological, intestinal
and sexual improvements;
• Most patients are feeling more secure and
have greater self-esteem as a result of gaining
awareness of and strengthening their motor
abilities, so much so that they can resume an
acceptable working and social activity;
• All patients have no longer suffered
hypokinetic pathologies and the most frequent
complications;
• From a psychological point of view, those
patients who were de-motivated and depressed
have all regained trust in their physical and
psychological possibilities by socializing with
other patients and appreciating the results
achieved; all these patients, stimulated by
the R.I.C., have resumed their social and
working life outside of the family environment
and medical institutions with a marked
improvement in the quality of life.
206
www.chinesport.com
Example 1. Using ankle supports
(supplied as standard).
Example 2. Using Alboland restraint
straps (supplied as standard).
Example 3. Using R.I.C. handles
(supplied as standard).
Example 4. Using the upper limbs
pedal exerciser (AC0112).
Example 5. Using the lower limbs
pedal exerciser (AC0113).
Example 6. Using the vertical foot
system (AC0107).
Example 7. Using the slide system
(AC0106).
Example 8. Using the R.I.C. bar with hook
(supplied as standard).
Example 9. Using the forearm
supports (AC0107).
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising