WORKING SAFELY AT HEIGHT

WORKING SAFELY AT HEIGHT
SAFE T Y LOCK SYSTEM
D ea le r stamp
Global solutions for
WORKING SAFELY
AT HEIGHT
13938.20 FACOM SAS with a capital of 24 414 487.20 € - R.C.S. Evry B328 630 645 Intra-communitary VAT FR 49 328 630 645. Non contractual photos. FACOM reserves the right
to modify any information without notice. Design and creation:
Photo credits: Fotolia / Shutterstock.
MAINTENANCE
WORKING
AT HEIGHT:
Wind TURBINES
Nuclear power plants
telecoms
Offshore platforms
eliminate risks
from falling tools
Every year falling tools cause thousands of accidents with consequences effecting
both health and productivity.
Tool solutions specifically suited to working in high places eliminate risks, avoid
wasted time and improve productivity.
In the nuclear sector, solutions for this type of risk are designated under the term
FME (Foreign Material Exclusion).
2
www.facom.com
IMPROVED safety
IMPROVED time gain
IMPROVED SAVINGS
A falling tool can be extremely
dangerous, particularly if it hits
somebody. In addition to the severe
injury it may inflict to individuals,
such an accident can have major
consequences for the company.
A fallen tool must be recovered.
Climbing down from a work
location, getting the tool, sometimes
in confined spaces... all these take
time, adding to the time required
for the job.
A falling tool may damage expensive
facilities or equipment, disturb or
stop a production process, even
end up in a remote location and
require replacement.
www.facom.com
3
SAFETY LOCK SYSTEM
The FACOM solution
for working AT HEIGHT
Robust and reliable
FACOM has always worked closely
with companies from various sectors
to develop tooling solutions that
perfectly meet user needs.
The
FACOM
Safety
Lock System (SLS) is
perfect for those who
regularly work in elevated
locations, assembling and maintaining
equipment above ground level.
4
FACOM’s ring system is made
of metal to withstand extreme
shocks, temperatures, and
other harsh working conditions.
The rings were designed
and tested by FACOM. Their
dimensions allow them to
Lanyard
full
stretched
length
Lanyard
withstand at least twice the
tool’s weight. The tool-ring
set is also tested in a realworld situation, with a test
of 400 falls per type of tool.
FACOM assembles the rings in
its plants with servo-controlled
presses guaranteeing perfect
crimping.
Traceability
Ergonomics
An individual traction test is performed on each
tool upon ring assembly.
An inspection certificate is issued and a unique
serial number engraved on the tool. FACOM
can hence follow up its production to guarantee
maximum safety. The unique serial number
also ensures the tool is identified and followed
throughout its lifetime.
The tools of the SLS range were designed by FACOM
specifically to preserve comfort in all conditions and the levels
of performance of its standard tools.
TOOL FALL
2x the lanyard
full stretched
length
www.facom.com
www.facom.com
The SLS ring slides along the wrench
for optimum use of the wrench’s open
end and ring.
Ratchet handles are fitted with a
shackle for easy snap hook fastening
and freedom of movement.
The SLS ring allows screwdriver shank
rotation without twisting the lanyard.
The SLS ring passes through the
metal part of pliers grips to guarantee
unequalled strength
5
Global solutions for working safely at height
SAFE T Y LOCK SYSTEM
SAFE T Y LOCK SYSTEM
TABLE OF CONTENTS
YOUR CUSTOMISED
TOOLS
FACOM SLS: A COMPREHENSIVE RANGE OF SECURED TOOLS
The Safety Lock System comprises 190 pre-equipped tools,
3 lanyards, 2 belts, 2 belt accessories, and 2 snap hooks.
NEW sERVICE OffERING CusTOMIzED fOAM MODuLEs
bECAusE yOu KNOW bEsT
WHAT yOu NEED!
Accessories SLS
9
2
Wrenches
12
3
Ratchets - Sockets
16
4
Torque control
17
5
Screwdrivers
18
6
Keys
19
7
Pliers
20
8
Measuring
24
9
Sawing - Cutting
25
Hammers
26
10
Discover
the configurator at
www.facom.com
6
• Upon request,
safety eye built into
the tools for work
in high locations.
• Your workshop in your
colours.
• Workshop roller cabinets
with a set of specific
drawers.
• Special bits
for torque wrenches.
• Finish and marking of
specific products.
• Material change.
1
www.facom.com
www.facom.com
7
Global solutions for working safely at height
SAFE T Y LOCK SYSTEM
SAFE T Y LOCK SYSTEM
Straps and belts SLS
sls ACCESSOriES
1
Accessories SLS
LAN0.2 20 cm strap - 60 mm stainless steel dual snap hooks with screw - SLS
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
• Strap connecting tools of the FACOM SLS range to
the belt.
• Fitted with 2 60 mm stainless steel locking snap
hooks with screw.
• Strap particularly suited to securing offset ring
wrenches series 54A to the manoeuvring handle
54.M. Also used to fasten tools to the belt.
• Strap length excluding snap hook: 200 mm.
• Strap width: 13 mm.
• Acceptable rated load: 4 kg.
Weight: 70 g.
LAN1.2 1.2 m strap - 80 mm stainless steel dual snap hooks with screw - SLS
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
• The Safety Lock System eye
system fastened to the tools
is 100% compatible with the
lanyards and accessories of
the FACOM SLS range.
• FACOM lanyards and accessories are
supplied in standard with safety screw-on
snap hooks. Automatic snap hook closing
and its screw provide a double safety
of the snap hook.
• FACOM SLS lanyards
and accessories are in the
orange colour generally used
for safety tools for higher
visibility.
• FACOM also offers snap hooks without safety
screw. They are easier to handle, particularly
when wearing gloves, although reducing the
safety level somewhat. Choose according to
your applications.
For all SLS lanyards and belt
accessories, FACOM uses
stainless steel snap hooks.
They offer excellent tensile
strength, but also to extreme
outdoor conditions, i.e. work
in humid or saline atmospheres.
8
FACOM SLS belts, belt
accessories and lanyards are
tested in extreme conditions
of use to guarantee high
strength..
SLS lanyards are elastic
to reduce their length and
enhance comfort of use.
The elastic also dampens
the fall of the tool attached.
• Strap connecting tools of the FACOM SLS range to
the belt.
• Fitted with 2 80 mm stainless steel locking snap
hooks with screw.
• Strap particularly suited to securing heavy tools to
the belt or external holders (ladder, scaffold, elevator
platform). Strap providing optimum securing of heavy
tools.
• Strap extended length excluding snap hook: 1.20 m.
• Strap width: 15 mm.
• Acceptable rated load: 6 kg.
Weight: 175 g
LAN-WRT1.2 1.2 m strap - Wrist loop and 80 mm stainless steel snap hook with screw - SLS
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
• Fitted with an 80mm stainless steel snap hook with
locking screw.
• Strap particularly suited to securing light tools to the
wrist. Strap ensuring high movement mobility.
• Strap extended length excluding snap hook: 1.20 m.
• Strap width: 20 mm.
• Wrist loop length: 220 mm .
• Acceptable rated load: 6 kg.
Weight: 110 g.
CT70-100 Belt with dual point metal loop - Waist size 70-100 cm - SLS
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
• Belt to fasten tools of the FACOM SLS range.
• Dual point metal loop: both points must be pressed
to release the loop to prevent accidental opening and
ensure optimum safety.
• Supplied with comfort foam pad with velcro for
optimum adjustment.
• Belt compatible with the accessories of the
FACOM SLS range: CT-ACC2M (D metal with 2 60 mm
stainless steel snap hooks with locking screw) and
CT-ACC (D metal only).
• 8 50 mm slots for CT-ACC2M or CT-ACC accessories.
• Height of the accessory storage strap: 45 mm.
• Waist size: 70 to 100 cm.
Weight: 390 g.
www.facom.com
www.facom.com
9
Global solutions for working safely at height
SAFE T Y LOCK SYSTEM
S A Belts,
F E T Y rings
L O C Kand
S Ysnap
STEM
hook SLS
2
Wrenches
CT100-140
Belt with
Accessoires
SLSdual point metal loop - Waist size 100-140 cm – SLS
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
• Belt to fasten tools of the FACOM SLS range.
• Dual point metal loop: both points must be pressed to release the loop to prevent
accidental opening and ensure optimum safety.
• Supplied with comfort foam pad with velcro for optimum adjustment.
• Belt compatible with the accessories of the FACOM SLS range: CT-ACC2M
(D metal with 2 60 mm stainless steel snap hooks with locking screw)
and CT-ACC (D metal only).
• 8 50 mm slots for CT-ACC2M or CT-ACC accessories.
• Height of the accessory storage strap: 45 mm.
• Waist size: 100 to 140 cm.
Weight: 410 g.
CT-ACC2M Metal ring with 2 60 mm stainless steel snap hooks with screw - SLS
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
• Accessory for belt of the FACOM SLS range.
• Supplied with 2 60 mm stainless steel snap hooks with locking screw.
The 2 snap hooks are integral with the “D” shaped metal ring.
• Strap width: 50 mm.
• Loop height: 50 mm.
• Internal width of the "D" ring: 50 mm.
• Internal height of the "D" ring: 40 mm.
• Acceptable rated load: 4 kg.
Weight: 100 g.
THE SLS TOOL RANGE
FACOM has designed its new
Safety Lock System tool range
specifically for working in high places
to eliminate the risks of accidents from
falling tools, avoid losing time, and
improve productivity.
Falling tools can have severe consequences if they hit a
person, as well as for the company. A falling tool
must be recovered, resulting in lost time. Falling tools
can also damage expensive equipment, resulting in losing
the tool or disturbing a production process. All these result
in financial repercussions.
STRENGTH AND ERGONOMICS OF USE
CT-ACC Metal ring only - SLS
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
• Accessory for belt of the FACOM SLS range.
• Supplied without snap hook. "D" shape metal ring only.
• Strap width: 50 mm.
• Loop height: 50 mm.
• Internal width of the "D" ring: 50 mm.
• Internal height of the "D" ring: 40 mm.
• Acceptable rated load: 4 kg.
Weight: 40 g.
• FACOM has designed a special ring system for its SLS tool range. The ring’s metal was chosen to ensure unequalled
strength: a tool suited to safety suffering no failure.
• The steel cable is embedded in the metal, guaranteeing a very robust "ring/cable" link.
In extreme breakage situations, the cable breaks before the link.
• The cable is crimped with a servo-controlled press ensuring perfect linkage.
• In addition, each tool is checked individually using a traction machine. An individual certificate is issued, and a unique
serial number engraved on the tool. FACOM ensures traceability of its production and your tooling can be followed
throughout its use.
• The cable is flexible to preserve optimum tool comfort and ergonomics.
60 mm stainless steel snap hook - SLS
• Snap hook in stainless steel 316: very high resistance to corrosion.
• No locking screw.
• Total length: 60 mm.
• Acceptable rated load: 300 kg.
C
d
A
d1
MOUSQ6X60SLS
A [mm]
C [mm]
d [mm]
d1 [mm]
L [mm]
7
8
6
10
60
The SLS ring system slides along wrench for
optimum use.
The SLS ring system
associated with a ring on the
shank allows the screwdriver
to rotate without twisting
the lanyard.
[g]
25
L
80 mm stainless steel snap hook - SLS
• Snap hook in stainless steel 316: very high resistance to corrosion.
• No locking screw.
• Total length: 80 mm.
• Acceptable rated load: 800 kg.
C
d
A
d1
MOUSQ8X80SLS
A [mm]
C [mm]
d [mm]
d1 [mm]
L [mm]
10
11
8
12
80
Handles of ratchets and torque wrenches are fitted
with a shackle for easy fastening of the snap hook
and high freedom of movement.
The SLS ring system passes through the metal
part of pliers grips guaranteeing unequalled
strength.
[g]
65
L
10
www.facom.com
www.facom.com
11
Global solutions for working safely at height
SAFE T Y LOCK SYSTEM
S A Combination
F E T Y L O C K wrenches
S Y S T E M SLS
Combination wrenches SLS
440.SLS - Metric combination wrenches - SLS
E1
E2
15°
B
E
B1
A
L
440.SLS - Inch combination wrenches - SLS
NF ISO 691, NF ISO 7738, NF ISO 3318, NF ISO 1711-1, E74-306, ISO 691, ISO 7738,
ISO 3318, ISO 1711-1, DIN ISO 691, DIN 1711-1, DIN 3113, ASME B107.100
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of accidental falls.
• The crimped "sliding" cable solution, selected and tested by FACOM, maintains user ergonomics
(8 - 30 mm wrenches).
• Standard wrench for all current applications.
• High mechanical strength combined with compact size meeting aeronautical standards.
• Ring head:
- Ring open end (size E) designed for better access to series or embedded screws.
- OGV® profile with 12-point ring for powerful tightening while protecting the nut.
- Ring head angled at 15°.
• Open end head:
- Open end angled at 15°.
- Open end head-handle geometry optimised for increased access.
• Metric sizes: 6 to 34 mm.
• Presentation: satin chrome finish.
440.6SLS
440.7SLS
440.8SLS
440.9SLS
440.10SLS
440.11SLS
440.12SLS
440.13SLS
440.14SLS
440.15SLS
440.16SLS
440.17SLS
440.18SLS
440.19SLS
440.21SLS
440.22SLS
440.23SLS
440.24SLS
440.27SLS
440.29SLS
440.30SLS
440.32SLS
440.34SLS
A [mm]
B [mm]
B1 [mm]
E [mm]
E1 [mm]
E2 [mm]
L [mm]
6
7
8
9
10
11
12
13
14
15
16
17
18
19
21
22
23
24
27
29
30
32
34
14,1
17,2
19,2
21,2
23,0
24,5
27,0
28,7
31,0
32,6
35,6
37,0
38,7
41,2
45,4
46,9
49,0
51,0
58,0
63,0
65,0
68,0
72,0
10,0
11,2
12,8
14,2
15,0
16,9
18,0
19,3
21,1
22,2
23,9
25,3
26,0
27,8
30,9
32,3
33,6
35,0
39,2
42,0
43,5
46,1
48,9
3,1
3,4
3,5
3,9
4,2
4,6
4,4
4,8
5,7
5,9
6,4
6,5
7,2
7,2
7,8
8,3
8,7
8,9
8,9
10,8
11,2
11,5
12,8
6,0
6,2
6,7
7,1
7,6
8,1
8,4
8,6
9,5
10,0
10,5
10,9
11,4
11,9
12,8
13,3
13,8
14,2
15,6
16,6
17,1
18,0
19,0
3,8
3,9
4,7
4,7
5,2
5,5
5,8
6,1
6,4
6,8
7,3
7,6
8,1
8,3
8,8
9,0
9,3
9,7
10,4
11,2
11,5
12,5
13,0
115
122
133
138
145
155
162
170
180
185
195
202
208
216
233
248
257
267
295
320
340
355
390
[g]
E1
E2
15°
B
E
B1
A
440.1/4SLS
440.5/16SLS
440.11/32SLS
440.3/8SLS
440.7/16SLS
440.1/2SLS
440.9/16SLS
440.5/8SLS
440.11/16SLS
440.3/4SLS
440.13/16SLS
440.7/8SLS
440.15/16SLS
440.1PSLS
440.1P1/16SLS
440.1P1/8SLS
440.1P1/4SLS
440.1P5/16SLS
E2
E1
B1
C
12
A ["]
B [mm]
B1 [mm]
E [mm]
E1 [mm]
E2 [mm]
L [mm]
1/4
5/16
11/32
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1'1/16
1'1/8
1'1/4
1'5/16
14,1
19,2
21,2
23,0
24,5
28,7
31,0
35,6
37,0
41,2
43,1
46,9
51,0
53,0
58,0
60,7
68,0
69,8
10,0
12,8
14,2
15,0
16,9
19,3
21,1
23,9
25,3
27,8
29,5
32,3
35,0
36,4
39,2
40,6
46,1
47,0
3,1
3,5
3,9
4,2
4,6
4,8
5,7
6,4
6,5
7,2
6,3
8,3
8,9
9,4
8,9
10,6
11,5
11,8
6,0
6,7
7,1
7,6
8,1
8,6
9,5
10,5
10,9
11,9
12,3
13,3
14,2
14,7
15,6
16,1
18,0
18,5
3,8
4,7
4,7
5,2
5,5
6,1
6,4
7,3
7,6
8,3
8,6
9,0
9,7
9,9
10,4
10,7
12,5
12,8
115
133
138
145
155
170
180
195
202
216
224
248
267
274
295
305
355
380
[g]
45
55
60
70
75
95
100
140
155
195
210
255
315
340
400
440
665
740
467S.SLS - Short metric ratchet combination wrenches - SLS
NF ISO 1711-1, NF ISO 691, ISO 1711-1, ISO 691, DIN ISO 1711-1, DIN ISO 691,
ASME B107.100
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped "sliding" cable solution, selected and tested by FACOM, maintains user
ergonomics (8 - 30 mm wrenches).
• Extra-short handle ratchet combination wrenches: ideal in highly dense zones.
• Compact ratchet mechanism and reversible by lever.
• Increment 5° (6° for dimension 7, 8 and 9 mm).
• Ring head angled at 15°.
• Open end head angled at 15°.
• Metric sizes: 7 to 17 mm.
• Presentation: satin chrome finish.
NF ISO 1711-1, NF ISO 691, ISO 1711-1, ISO 691, DIN ISO 1711-1, DIN ISO 691, ASME B107.100
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of accidental falls.
• The crimped "sliding" cable solution, selected and tested by FACOM, maintains user
ergonomics (8 - 30 mm wrenches).
• Standard ratchet combination wrenches: for all current applications.
• Compact ratchet mechanism and reversible by lever.
• Increment 5° (6° for dimensions 8 and 9 mm).
• Ring head angled at 15°.
• Open end head angled at 15°.
• Metric sizes: 8 to 32 mm.
• Presentation: satin chrome finish.
E
ASME B107.100, SAE AS954G
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped "sliding" cable solution, selected and tested by FACOM, maintains user
ergonomics (8 - 30 mm wrenches).
• Standard wrench for all current applications.
• High mechanical strength combined with compact size meeting aeronautical
standards.
• Ring head:
- Ring open end (size E) designed for better access to series or embedded screws.
- OGV ® profile with 12-point ring for powerful tightening while protecting the nut.
- Ring head angled at 15°.
• Open end head:
- Open end angled at 15°.
- Open end head-handle geometry optimised for increased access.
• Dimensions in inches: from 1/4" to 1"5/16.
• Presentation: satin chrome finish.
L
45
45
55
60
65
75
85
95
110
120
140
155
175
195
230
255
280
315
400
500
555
665
770
467.SLS - Metric standard ratchet combination wrenches - SLS
467.8SLS
467.9SLS
467.10SLS
467.11SLS
467.12SLS
467.13SLS
467.14SLS
467.15SLS
467.16SLS
467.17SLS
467.18SLS
467.19SLS
467.21SLS
467.24SLS
467.27SLS
467.30SLS
467.32SLS
2
Wrenches
A [mm]
B [mm]
B1 [mm]
C [mm]
E [mm]
8
9
10
11
12
13
14
15
16
17
18
19
21
24
27
30
32
16,7
18,7
20,8
23,0
24,6
26,8
29,0
31,0
33,0
35,5
37,5
39,4
45,8
51,8
56,4
62,7
66,4
17,0
18,6
20,2
22,0
23,4
25,5
26,9
28,3
29,8
31,8
32,7
34,0
40,1
46,5
52,4
58,1
61,9
9,7
10,3
11,3
12,2
13,0
14,5
15,1
16,1
17,3
18,2
19,6
20,4
23,9
26,4
29,2
31,7
33,7
4,3
4,5
5,0
5,3
5,5
6,1
6,5
6,8
7,1
7,5
8,1
8,6
9,0
10,0
10,8
11,5
12,4
www.facom.com
E1 [mm] E2 [mm]
6,5
6,9
7,3
7,7
8,2
8,6
9,0
9,4
9,9
10,3
10,7
11,2
13,0
14,5
15,5
17,0
17,5
2,5
2,5
2,9
3,2
3,3
3,5
3,8
4,0
4,2
4,5
4,6
4,6
5,1
5,6
6,3
6,8
7,3
L [mm]
140
149
158
165
171
178
190
199
208
225
236
247
287,8
321
356,6
400,7
423,5
[g]
55
65
75
85
95
115
135
155
165
195
225
255
365
505
685
895
1105
E2
E
E1
B1
C
467S.7SLS
467S.8SLS
467S.9SLS
467S.10SLS
467S.11SLS
467S.12SLS
467S.13SLS
467S.14SLS
467S.15SLS
467S.16SLS
467S.17SLS
www.facom.com
A [mm]
B [mm]
B1 [mm]
C [mm]
E [mm]
7
8
9
10
11
12
13
14
15
16
17
16,7
16,7
18,7
20,8
23,0
24,6
26,8
29,0
31,0
33,0
35,5
17,0
17,0
18,6
20,2
22,0
23,4
25,5
26,9
28,3
29,8
31,8
6,5
6,5
6,9
7,3
7,7
8,2
8,6
9,0
9,4
9,9
10,3
4,0
4,0
4,4
4,8
5,2
5,5
5,8
6,2
6,5
6,8
7,2
E1 [mm] E2 [mm]
6,5
6,5
6,9
7,3
7,7
8,2
8,6
9,0
9,4
9,9
10,3
2,8
2,8
3,0
3,4
3,7
4,0
4,0
4,3
4,5
4,7
5,0
L [mm]
90
90
93
95
103
106
108
115
119
123
127
[g]
50
50
55
60
75
80
90
105
115
125
140
13
Global solutions for working safely at height
SAFE T Y LOCK SYSTEM
S A Open-end
FE T Y LOC
K Sring
Y S Twrenches
EM
and
SLS
Inch offset and adjustable wrenches SLS
44.SLS - Metric open end wrenches - SLS
54.MBSLS - Handle - SLS
NF ISO 10102, NF ISO 3318, NF ISO 1711-1, NF ISO 691, ISO 10102, ISO 3318, ISO
1711-1, ISO 691, DIN ISO 1711-1, DIN ISO 691, DIN 3110
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped "rotating" cable solution, selected and tested by FACOM, maintains
user ergonomics.
• H andle 54.M1BSLS: use with 54A.24SLS and 54A.30SLS wrenches.
(Length: 460 mm. Inner Ø: 19 mm. Outer Ø: 25 mm).
• H andle 54.M2BSLS: use with 54A.32SLS, 54A.36SLS and 54A.41SLS wrenches.
(Length: 610 mm. Inner Ø: 23 mm. Outer Ø: 29 mm).
• Handle 54.M3BSLS: use with 54A.46 wrench. (Length: 760 mm. Inner Ø: 25 mm.
Outer Ø: 32 mm).
• Finish: chromed.
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped "sliding" cable solution, selected and tested by FACOM, maintains user
ergonomics (8 - 30 mm wrenches).
• Open end wrenches = the open ends are slimmer than a standard combination
wrench for better thickness accessibility. Examples: brake calipers, hydraulic hose
locknuts.
• Heads hinged at 15°.
• Metric sizes: 6 to 41 mm.
• Presentation: satin chrome finish.
A
B
B1
44.6X7SLS
44.8X9SLS
44.10X11SLS
44.12X13SLS
44.14X15SLS
44.16X17SLS
44.18X19SLS
44.21X23SLS
44.22X24SLS
44.24X27SLS
44.30X32SLS
44.34X36SLS
44.36X41SLS
A
A [mm]
B x B1 [mm]
6x7
8x9
10x11
12x13
14x15
16x17
18x19
21x23
22x24
24x27
30x32
34x36
36x41
15,0
18,5
23,0
25,5
31,0
35,5
39,0
47,0
47,5
51,0
63,0
71,0
78,0
x
x
x
x
x
x
x
x
x
x
x
x
x
E [mm]
L [mm]
3,5
3,8
4,7
5,1
5,5
6,3
7,3
8,3
8,8
8,8
9,8
11,5
12,0
120
137
152
167
182
200
220
242
261
270
318
342
381
17,5
21,0
25,0
29,0
33,0
37,0
42,0
50,5
52,0
58,0
70,0
75,0
87,0
[g]
54.M1BSLS
54.M2BSLS
54.M3BSLS
[g]
45
55
75
90
115
145
185
245
285
350
540
745
970
NF ISO 6787, ISO 6787, DIN 3117, ASME B107.100
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of accidental falls.
• Good access to the button = easy setting.
• Non-protruding moving jaw at maximum capacity.
• Pre-adjustment of jaw opening thanks to millimetric gradation.
• Right-hand button rotation.
• Range from 4" to 24".
• Presentation: chromed body and polished head faces.
• Adjustable wrench with handle ring for direct hanging by snap hook.
L
54A.SLS - Metric "heavy-duty" offset-ring wrenches - SLS
L1
H
E
d
L2
B
NF ISO 691, ISO 691, DIN ISO 691
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped "rotating" cable solution, selected and tested by FACOM, maintains
user ergonomics.
• "Heavy-duty" offset-ring wrenches: wrenches for tight (unlocking, thanks to high
strength of the polygonal head and long adaptable handle (to be ordered separately).
• Ring offset to clear fingers or obstacles. Ideal for series of nuts.
• Handle to use:
- 54.M1BSLS for the dimensions 24 and 30 mm;
- 54.M2BSLS for the dimensions 32 to 41 mm;
- 54.M3BSLS for the dimensions 46 mm;
• Metric sizes: 24 to 46 mm.
• Presentation: satin chrome finish.
L1
A [mm] B [mm]
24
30
32
36
41
46
38,0
48,0
49,0
54,0
62,0
69,0
d [mm]
18,5
18,5
21,5
21,5
21,5
24,5
E [mm] H [mm]
17,0
18,0
18,0
20,0
22,0
23,0
29,5
33,5
34,0
35,5
39,5
40,0
L [mm] L1 [mm] L2 [mm] L3 [mm]
180
200
235
245
265
280
85
95
116
120
127
129
460
460
610
610
610
760
555
565
730
735
748
910
C
C1
B A
E
E1 E2
113A.8C
113A.10C
113A.12C
113A.15C
113A.18C
A
[mm]
27
30
34
44
53
B
[mm]
61,5
69,5
80,0
97,0
115,0
C x C1
[mm]
18,5 x 24,0
21,5 x 28,5
25,0 x 31,0
28,0 x 35,0
31,0 x 38,5
E
[mm]
6,5
9,0
10,0
13,5
16,0
E1
E2
E3
E4
[mm] [mm] [mm] [mm]
13,5 9,0 11,0 8,5
15,5 9,5 12,7 10,0
18,0 10,2 13,0 10,0
20,0 12,0 14,8 11,5
22,5 14,3 17,8 13,5
L
[mm]
206
255
306
380
456
L1
[mm]
24
29
34
44
53
[g]
275
480
700
1145
1790
E3 E4
L
131A.SLS - Steel Stillson models - SLS
Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• Capacity: 0 to 102 mm; 0 to 3"1/2.
• Very robust wrench, head hardened to 55 HRc.
• Accurate approach thanks to fine machining of the threads and button, good grip.
• "Stillson" wrench with handle ring for direct hanging by snap hook.
• Movable jaw non-removable to prevent loss or fall.
L3
54A.24SLS
54A.30SLS
54A.32SLS
54A.36SLS
54A.41SLS
54A.46SLS
590
1200
2300
113A.C - Chromed adjustable wrenches
E
L
2
Wrenches
[g]
405
575
725
865
1025
1325
131A.10SLS
131A.14SLS
131A.18SLS
131A.24SLS
A maxi [mm]
A maxi ["]
B [mm]
E [mm]
L [mm]
34
49
60
76
1
1'1/2
2
2'
25,0
29,5
32,0
41,5
16,0
21,0
24,0
27,5
250
350
450
600
[kg]
0,625
1,085
1,825
3,025
A
14
www.facom.com
www.facom.com
15
Global solutions for working safely at height
SAFE T Y LOCK SYSTEM
S A Ratchets
F E T Y L OSLS
CK SYSTEM
Ratchets and click wrenches SLS
1/4" maintenance free pear head ratchet - SLS
1/2" maintenance free pear head ratchet - SLS
NF ISO 3315, ISO 3315, DIN 3122, ASME B107.10
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• FACOM has adopted the clevis solution for particularly heavy and/or large tools.
• Very long lifetime in all working conditions. Dust proof, maintenance free
mechanism.
• 72 teeth mechanism for 5° increments.
• Socket safety lock: no more sockets falling into machines.
• Drive direction switch allows easy reversal even with gloved or greasy hands.
• Palm control system - allows the operator to press down on the head avoiding risk
of accidental reverse.
• Ultra-compact head.
• Bimaterial elastomer handle: high resistance to abrasion and the most severe
workshop solvents: SP95, SP98, diesel fuel, acetone, brake fluid, Skydrol, Jet Oil, jet
fuel.
NF ISO 3315, ISO 3315, DIN 3122, ASME B107.10
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• FACOM has adopted the clevis solution for particularly heavy and/or large tools.
• Very long lifetime in all working conditions. Dust proof, maintenance free
mechanism.
• 72 teeth mechanism for 5° increments.
• Socket safety lock: no more sockets falling into machines.
• Drive direction switch allows easy reversal even with gloved or greasy hands.
• Palm control system - allows the operator to press down on the head avoiding risk
of accidental reverse.
• Ultra-compact head.
• Bimaterial elastomer handle: high resistance to abrasion and the most severe
workshop solvents: SP95, SP98, diesel fuel, acetone, brake fluid, Skydrol, Jet Oil, jet
fuel.
d
d
d1
d1
H
RL.171SLS
L1
L
d [mm]
d1 [mm]
H [mm]
L [mm]
L1 [mm]
22
17,5/20
25
121
110
H
[g]
L1
L
110
NF ISO 3315, ISO 3315, DIN 3122, ASME B107.10
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• FACOM has adopted the clevis solution for particularly heavy and/or large tools.
• Very long lifetime in all working conditions. Dust proof, maintenance free
mechanism.
• 72 teeth mechanism for 5° increments.
• Socket safety lock: no more sockets falling into machines.
• Drive direction switch allows easy reversal even with gloved or greasy hands.
• Palm control system - allows the operator to press down on the head avoiding risk
of accidental reverse.
• Ultra-compact head.
• Bimaterial elastomer handle: high resistance to abrasion and the most severe
workshop solvents: SP95, SP98, diesel fuel, acetone, brake fluid, Skydrol, Jet Oil, jet
fuel.
d
d1
H
L1
L
JL.171SLS
SL.171SLS
d [mm]
d1 [mm]
H [mm]
L [mm]
L1 [mm]
38
30/33
40
262
245
[g]
480
306DSLS - Click wrenches without accessories
3/8" maintenance free pear head ratchet - SLS
d [mm]
d1 [mm]
H [mm]
L [mm]
L1 [mm]
29
24/27
29
210
195
NF EN ISO 6789, ISO 6789, DIN EN ISO 6789
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of accidental falls.
• FACOM has adopted the clevis solution for particularly heavy and/or large tools
(32 - 41 mm wrenches).
• Factory accuracy: ± 2% except:
- R.306-25D - K.306A600 - K.306A1000 (± 4%). - R.304DA (± 6%).
• Reliability of mechanism: 50 000 cycles (wrenches up to 200 N.m).
• Use possible with accessories: - End fitting: 9 x 12 or 14 x 18 mm. - Diameter: 30 mm.
• One-way wrenches usable for unscrewing by reversing the bits.
• Numbered wrenches supplied with ISO 6789 calibration certificate.
• Supplied in plastic box.
R.306-25DSLS
J.306-50DSLS
S.306-100DSLS
S.306-200DSLS
S.306-350DSLS
Capacity
[N.m]
5 - 25
10 - 50
20 - 100
40 - 200
70 - 350
Attachment
9 x 12
9 x 12
9 x 12
14 x 18
14 x 18
Graduation
[N.m]
0,10
1,00
1,00
1,00
2,00
L [mm]
Box
271
357
437
515
725
BP.D1
BP.D2
BP.D2
BP.D3
BP.D3
[kg]
0,490
0,970
1,090
1,300
1,830
[g]
240
sockets
16
3-4
Ratchets - Torque control
ACCESSORiES
FACOM service,
performance, and safety
FACOM service,
performance, and safety
For the entire range of Facom sockets,
go to page 226 of the F13 catalogue.
For all accessories for torque wrenches,
go to page 340 of the F13 catalogue.
www.facom.com
www.facom.com
17
Global solutions for working safely at height
SAFE T Y LOCK SYSTEM
S A Screwdrivers
F E T Y L O C K SLS
SYSTEM
Keys SLS
AN-ANF.SLS - PROTWIST ® screwdrivers for slotted head screws - milled blades - SLS
d
L1
84TZ.SLS - Metric hexagon keys - SLS
NF ISO 2380-1, NF ISO 2380-2, ISO 2380-1, ISO 2380-2, DIN ISO 2380-1, DIN ISO
2380-2, ASME B107.600
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped “rotating” cable solution, selected and tested by FACOM, maintains user
ergonomics.
• Silicon carbon blade: strong and resistant to flexion.
• Bi-material grip resists to impacts, abrasion, and chemicals.
• Finish: black tipped mat chromed blade.
d1
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped “rotating” cable solution, selected and tested by FACOM, maintains user
ergonomics.
• Ergonomic T handle for efficient use of the two ends of the key.
• Silicon steel.
• Finish: polished, phosphate-coated.
L2
L
AN2X75SLS
AN2.5X75SLS
AN3X100SLS
AN3.5X100SLS
AN4X100SLS
AN4X150SLS
AN5.5X150SLS
AN6.5X150SLS
ANF8X150SLS
ANF10X200SLS
E
A
A
[mm]
2,0
2,5
3,0
3,5
4,0
4,0
5,5
6,5
8,0
10,0
E
[mm]
0,4
0,4
0,5
0,6
0,8
0,8
1,0
1,2
1,2
1,6
d
[mm]
19
19
25
25
30
30
30
36
40
40
d1 x L1
[mm]
2,0 x 75
2,5 x 75
3,0 x 100
3,5 x 100
4,0 x 100
4,0 x 150
5,5 x 150
6,5 x 150
7,0 x 150
9,0 x 200
L
[mm]
169
169
203
203
209
259
259
270
275
325
L2
[mm]
94
94
103
103
109
109
109
120
125
125
5-6
Screwdrivers - Keys
84TZ.2.5SLS
84TZ.3SLS
84TZ.4SLS
84TZ.5SLS
84TZ.6SLS
84TZ.8SLS
84TZ.10SLS
[g]
60
60
75
85
90
95
130
170
190
255
L3
A [mm]
L [mm]
L1 [mm]
L2 [mm]
L3 [mm]
2.5
3
4
5
6
8
10
133
133
183
183
240
240
240
90
90
130
130
175
175
175
63
63
77
77
95
95
95
11
11
12
12
15
15
15
[g]
35
50
85
95
140
150
220
L1
L
84TZ.SLS - Inch hexagon keys - SLS
ANP.SLS - PROTWIST ® screwdrivers for Phillips ® screws - round blades - SLS
d1
d
L1
L2
L
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped "rotating" cable solution, selected and tested by FACOM, maintains
user ergonomics.
• Ergonomic T handle for efficient use of the two ends of the key.
• Silicon steel.
• Finish: polished, phosphate-coated.
NF ISO 8764-1, NF ISO 8764-2, ISO 8764-1, ISO 8764-2, DIN ISO 8764-1, DIN ISO
8764-2, ASME B107.600
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped “rotating” cable solution, selected and tested by FACOM, maintains user
ergonomics.
• Silicon carbon blade: strong and resistant to flexion.
• Bi-material grip resists to impacts, abrasion, and chemicals.
• Finish: black tipped mat chromed blade.
ANP1X100SLS
ANP2X125SLS
ANP3X150SLS
Phillips [No]
d [mm]
d1 x L1 [mm]
L [mm]
L2 [mm]
PH1
PH2
PH3
30
36
40
4,5 x 100
6,0 x 125
8,0 x 150
209
245
275
109
120
125
[g]
84TZ.5/32SLS
84TZ.3/16SLS
84TZ.7/32SLS
84TZ.1/4SLS
84TZ.5/16SLS
84TZ.3/8SLS
L3
115
165
235
A ["]
L [mm]
L1 [mm]
L2 [mm]
L3 [mm]
5/32
3/16
7/32
1/4
5/16
3/8
183
183
240
240
240
240
130
130
175
175
175
175
77
77
95
95
95
95
12
12
15
15
15
15
[g]
85
90
105
140
150
205
L1
L
89TX.SLS - Torx ® spinners - SLS
AND.SLS - PROTWIST ® screwdrivers for Pozidriv ® screws - round blades - SLS
d1
d
L1
L2
L
NF ISO 8764-1, NF ISO 8764-2, ISO 8764-1, ISO 8764-2, DIN ISO 8764-1, DIN ISO
8764-2, ASME B107.600
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped “rotating” cable solution, selected and tested by FACOM, maintains user
ergonomics.
• Silicon carbon blade: strong and resistant to flexion.
• Bi-material grip resists to impacts, abrasion, and chemicals.
• Finish: black tipped mat chromed round blade.
AND1X100SLS
AND2X125SLS
AND3X150SLS
Pozidriv [No]
d [mm]
d1 x L1 [mm]
L [mm]
L2 [mm]
PZ1
PZ2
PZ3
30
36
40
4,5 x 100
6,0 x 125
8,0 x 150
209
245
275
109
120
125
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped "rotating" cable solution, selected and tested by FACOM, maintains
user ergonomics.
• Ergonomic handle for efficient use of the two ends of the key.
• Finish: chromed shot-blasted.
89TX.10SLS
89TX.15SLS
89TX.20SLS
89TX.25SLS
89TX.30SLS
89TX.40SLS
89TX.45SLS
89TX.50SLS
[g]
115
165
235
L3
A [mm]
Torx [No]
L [mm]
L1 [mm]
L2 [mm]
L3 [mm]
2,72
3,26
3,84
4,40
5,49
6,60
7,77
8,79
T10
T15
T20
T25
T30
T40
T45
T50
133
133
183
183
240
240
240
240
90
130
130
130
175
175
175
175
63
77
77
77
95
95
95
95
12
12
12
15
15
15
15
15
[g]
35
40
65
80
115
130
150
195
L1
L
18
www.facom.com
www.facom.com
19
Global solutions for working safely at height
SAFE T Y LOCK SYSTEM
S A Multigrip
F E T Y L O pliers
C K S Yand
S T Ecutters
M
SLS
half-rond pliers SLS
181A.SLS - Locking twin slip-joint multigrip pliers - SLS
7
Pliers
190.CPESLS - End cutters - SLS
NF ISO 8976, ISO 8976, DIN ISO 8976, ASME B107.500
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped "rotating" cable solution, selected and tested by FACOM, maintains
user ergonomics.
• Fast, precise push-button adjustment with safety lock.
• 12-position notches.
• The closed position of the ergonomic comfort grip handles increases the
tightening power.
• High torsional strength.
• Slim-profile self-gripping nose.
• 62 HRc high-frequency treated jaws.
• Finish: Chromed, bi-material ergonomic grips.
NF ISO 5748, ISO 5748, DIN ISO 5748, ASME B107.500
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped "rotating" cable solution, selected and tested by FACOM, maintains
user ergonomics.
• Cutting edges designed to cleanly cut all types of wire: piano wire, hard and soft
wires (max. 200 kg/mm²).
• Long lever arm, offset pivot for minimum cutting effort.
• High durability Chrome-Molybdenum-Vanadium steel, very hard cutting edges
61/63 HRc.
• Ergonomic grips resistant to chemical agents.
• Removable return spring.
• Finish: chromed.
C
L1
C
181A.18CPESLS
181A.25CPESLS
B
[mm]
22
28
C
[mm]
24
28
E
[mm]
7,5
7,5
E1
[mm]
20,0
22,5
L
[mm]
185
245
L1 Capacity Nuts Capacity Maxi
[mm]
[mm]
Tube [mm]
48
36
36
54
41
42
[g]
255
385
B
190.16CPESLS
190.20CPESLS
E
B [mm]
C [mm]
d maxi [mm]
E [mm]
H [mm]
L [mm]
28
31
6,5
7,5
1,6
2,0
11,5
13,5
23
29
160
200
[g]
225
365
H
B
E
L
E1
Long half-round nose pliers - SLS
High-performance multigrip pliers - SLS
NF ISO 5745, ISO 5745, DIN ISO 5745, ASME B107.500
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped "rotating" cable solution, selected and tested by FACOM, maintains
user ergonomics.
• Narrow, finely serrated tips with a pipe-grip.
• Side cutter for copper and hard steel wire (max. 160 kg/mm²).
• Ergonomic grips resistant to chemical agents.
• Removable return spring.
• Finish: chromed.
NF ISO 8976, ISO 8976, DIN ISO 8976, ASME B107.500
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped "rotating" cable solution, selected and tested by FACOM, maintains
user ergonomics.
• Capacity: 44 mm.
• Ideal for confined spaces: long reach thin noses.
• Double heat-treated tips: high wear resistance, hardness 60/62 HRc.
• 3 options: Chrome finish, ergonomic grips.
180.CPESLS
A [mm]
B [mm]
E [mm]
E1 [mm]
L [mm]
L1 [mm]
27
34
8
22
250
58
[g]
385
L
E
185.20CPESLS
C
B [mm]
C [mm]
d [mm]
E [mm]
E1 [mm]
L [mm]
18
75
2,9
3,6
9
200
[g]
215
B
L1
d
E1
E1
Short half-round nose pliers - SLS
192.CPESLS - Diagonal cutters - SLS
NF ISO 5749, ISO 5749, DIN ISO 5749, ASME B107.500
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped "rotating" cable solution, selected and tested by FACOM, maintains
user ergonomics.
• Cutting edges designed to cleanly cut all types of wire: piano wire, soft wires and
modern materials 200 kg/mm²).
• Minimum cutting force thanks to long lever arm and offset axis.
• High durability Chrome-Molybdenum-Vanadium steel, very hard cutting edges
61/63 HRc.
• Ergonomic grips resistant to chemical agents.
• Removable return spring.
• Finish: chromed.
C
NF ISO 5745, ISO 5745, DIN ISO 5745, ASME B107.500
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped "rotating" cable solution, selected and tested by FACOM, maintains
user ergonomics.
• Narrow, finely serrated tips, 40° angled nose.
• Side cutter for copper and hard steel wire (max. 160 kg/mm²).
• Ergonomic grips resistant to chemical agents.
• Removable return spring.
• Finish: chromed.
L
C
E
E1
195.16CPESLS
C [mm]
E [mm]
E1 [mm]
E2 [mm]
L [mm]
L1 [mm]
50
3
17
9
160
2,5
[g]
205
B
E
192.16CPESLS
192.20CPESLS
B [mm]
C [mm]
d maxi [mm]
E [mm]
L [mm]
24,0
28,0
18,0
22,0
1,6
2,0
10,0
11,5
160
200
[g]
225
345
L1
E2
L
20
www.facom.com
www.facom.com
21
Global solutions for working safely at height
SAFE T Y LOCK SYSTEM
S A Pliers
F E T Y SLS
LOCK SYSTEM
Grip pliers SLS
Long half-round nose pliers - SLS
177A.SLS - Straight nose outside circlip ® pliers - SLS
NF ISO 5745, ISO 5745, DIN ISO 5745, ASME B107.500
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped "rotating" cable solution, selected and tested by FACOM, maintains
user ergonomics.
• Narrow, finely serrated tips with a pipe-grip.
• Side cutter for copper and hard steel wire (max. 160 kg/mm²).
• Ergonomic grips resistant to chemical agents.
• Removable return spring.
• Finish: chromed.
L
195.20CPESLS
C
E
7
Pliers
B [mm]
C [mm]
d [mm]
E [mm]
E1 [mm]
L [mm]
18
69
2,9
3,6
9
200
NF E 73-130, DIN 5254, ASME B107.500
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped “rotating” cable solution, selected and tested by FACOM, maintains user
ergonomics.
• For Circlips ® 10 --> 60 mm.
• Piano wire tips: high distortion resistance.
• Long 10° angled tips for optimum circlip holding.
• Identification colour code: saves time.
• Grips in anti-slip granite PVC.
[g]
177A.13SLS
177A.18SLS
215
d [mm]
d mini - maxi [mm]
L [mm]
1,3
1,8
10 - 25
19 - 60
150
180
[g]
130
200
B
d
E1
187.CPESLS - Combination pliers - SLS
Short-nose lock-grip pliers - SLS
NF ISO 5746, ISO 5746, DIN ISO 5746, ASME B107.500
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped "rotating" cable solution, selected and tested by FACOM, maintains
user ergonomics.
• Cutting edges designed to cut all types of wire: piano wire, soft wires and modern
materials (Fe 200 kg/mm²).
• Long lever arm, offset pivot for minimum cutting effort.
• High durability Chrome-Molybdenum-Vanadium steel, very hard cutting edges
61/63 HRc.
• Ergonomic grips resistant to chemical agents.
• Removable return spring.
• Finish: chromed.
C
C1
187.16CPESLS
187.18CPESLS
B [mm]
C [mm]
C1 [mm]
E [mm]
L [mm]
21
23
34
36
12
13
9,5
10,0
165
185
ASME B107.500
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped "rotating" cable solution, selected and tested by FACOM, maintains
user ergonomics.
• 4-position slip joint system.
• Nose width 17 mm.
• Machined groove in upper jaw holds small round sections.
• Finish: chromed.
L1
500ASLS
L
H [mm]
L [mm]
L1 [mm]
85
235
17
[g]
765
[g]
220
250
H
E
Long-nose lock-grip pliers - SLS
179A.SLS - Straight nose inside circlip ® pliers - SLS
ASME B107.500
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped "rotating" cable solution, selected and tested by FACOM, maintains
user ergonomics.
• 4-position slip joint system.
• Nose width 17 mm.
• Machined groove in upper jaw holds small round sections.
• Finish: chromed.
Weight: 620 g.
NF E 73-130, DIN 5256, ASME B107.500
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped "rotating" cable solution, selected and tested by FACOM, maintains
user ergonomics.
• For Circlips ® 12 --> 60 mm.
• Piano wire tips: high distortion resistance.
• Long 10° angled tips for optimum circlip holding.
• Identification colour code: saves time.
• Grips in anti-slip granite PVC.
179A.13SLS
179A.18SLS
d [mm]
d mini - maxi [mm]
L [mm]
1,3
1,8
12 - 25
19 - 60
140
185
[g]
140
240
L1
501ASLS
L
H [mm]
L [mm]
L1 [mm]
80
252
17
[g]
800
H
22
www.facom.com
www.facom.com
23
Global solutions for working safely at height
SAFE T Y LOCK SYSTEM
S A Pliers
F E T Y and
L O Crules
K S YSLS
STEM
Measure, knife and scissors SLS
449BSLS Standard crimping pliers for insulated terminals - SLS
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
8-9
Measuring - Cutting
893.SLS - ABS body tape measure - SLS
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped "rotating" cable solution, selected and tested by FACOM, maintains
user ergonomics.
• Ergonomic, ABS material.
• Tape with mat anti-reflection nylon tape.
• High strength tape.
• High strength cover hook:
- 2 rivets with stainless reinforcement plate on the 3 m.
- 3 rivets with stainless reinforcement plate on the 8 m.
• Interior measurements by adding the L dimension (see table).
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped "rotating" cable solution, selected and tested by FACOM, maintains
user ergonomics.
• Crimping pre-insulated terminals: 1.5-2.5-6 mm².
• Crimping bare terminals: 1.5-2.5-6 mm².
• Stripping: 0.75 to 6 mm².
• Built-in wire cutting function.
Weight: 345 g.
893.316SLS
893.519SLS
H
E [mm]
H [mm]
L [mm]
L1 [mm]
L2 [m]
27,0
31,0
60,0
67,0
60
70
16
19
3
5
[g]
150
225
E
L
L2
L1
601SLS Compact hacksaw frame - SLS
Plastic cable-tie pliers - SLS
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L1
E
L
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped "rotating" cable solution, selected and tested by FACOM, maintains
user ergonomics.
• For all cable-ties 2.4 to 9 mm wide.
• Sturdy and easy to use, very good demultiplication.
• Long travel for a fast approach.
• Manual cable-tie tail cutting.
Weight: 310 g
E [mm]
L [mm]
L1 [mm]
17
190
100
455BSLS
[g]
335
803.MSLS - Stainless steel rules - 2 sides - SLS
L2
L1
Safety knife with retractable blade - SLS
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped "rotating" cable solution, selected and tested by FACOM, maintains
user ergonomics.
• Engraved on both sides.
• One side in mm - One side in 1/2 mm.
• Stainless steel 18 % Cr - 8 % Ni.
• Anti-reflection mat satin surface.
803.200MSLS
803.300MSLS
L [mm]
L1 x L2 [mm]
200
300
13 x 0,4
13 x 0,5
804FSLS Round tip feeler gauges - SLS
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped “rotating” cable solution, selected and tested by FACOM, maintains user
ergonomics.
www.facom.com
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped "rotating" cable solution, selected and tested by FACOM, maintains
user ergonomics.
• Safety knife.
• Blade automatically retracts after use.
• Zamak body.
• ABS cursor, front or side thumb control.
• Supplied with 3 blades (1 factory-mounted and 2 in the body).
[g]
35
40
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
24
NF E 73-073, DIN 6473
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped "rotating" cable solution, selected and tested by FACOM, maintains
user ergonomics.
• Impact-resistant steel/resin construction compact and lightweight.
• Blade tension 80 kg.
• 2 blade positions: 45° and 90°.
• Takes 300 mm blade.
• Dimensions (L. x W.): 385 x 145 mm.
• Supplied with one blade.
Weight: 615 g.
• Spare blades: 668B.
844.DSLS
H mini - maxi [mm]
L [mm]
40,5 - 44,0
176
[g]
210
841A.3SLS "Heavy duty" scissors - SLS
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
• Tool with FACOM SLS fastening solution preventing accidental fall.
• The "rotating" crimped cable solution chosen and tested by FACOM preserves the tool’s
ergonomics.
• Heavy duty scissors.
• Weight: 255 g.
www.facom.com
25
Global solutions for working safely at height
SAFE T Y LOCK SYSTEM
S A Hammers
FE T Y LOC
K Schisels
Y S T E MSLS
and
Club hammers SLS
640180SLS Twin-blade electricians knife with plastic handle - SLS
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
212A.SLS - Dead-blow hammers, interchangeable tips - SLS
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped "rotating" cable solution, selected and tested by FACOM, maintains
user ergonomics.
• Electricians knife with blades suitable for cable work:
- 1 straight hollow ground general-purpose blade (length: 65 mm).
- 1 short curved blade, specially designed for cable work (length: 35 mm).
• Safe: lock-back for each blade.
• Length closed: 104 mm.
• Total length: 131/169 mm.
Weight: 100g.
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped "rotating" cable solution, selected and tested by FACOM, maintains
user ergonomics.
• Glass fiber handle.
• Steel body.
• Easily replaceable, special nylon tips shore hardness D74 ± 5.
• Ergonomic PVC grip.
• Presentation: black epoxy.
• Spare tip: 212.E35 to E60.
L
200C.SLS - Graphite handle riveting engineers hammer - SLS
L1
NF E 71-016, NF ISO 15601, ISO 15601
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped "rotating" cable solution, selected and tested by FACOM, maintains
user ergonomics.
• Ergonomic safety handle with graphite core.
200C.26SLS
200C.30SLS
200C.32SLS
200C.40SLS
200C.60SLS
L1
L [mm]
L1 [mm]
L2 [mm]
245
270
300
330
380
80
93
100
108
151
25
30
32
40
60
[kg]
0,370
0,495
0,610
1,050
2,825
L2
205C.SLS - Graphite handle DIN engineers hammer - SLS
NF ISO 15601, ISO 15601, DIN 1041
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped "rotating" cable solution, selected and tested by FACOM, maintains
user ergonomics.
• Ergonomic safety handle with graphite core.
205C.20SLS
205C.30SLS
205C.50SLS
205C.80SLS
205C.100SLS
L1
L [mm]
L1 [mm]
L2 [mm]
280
300
320
350
360
96
106
122
132
137
19
23
27
33
36
212A.35SLS
212A.40SLS
212A.50SLS
212A.60SLS
Slim-profile chisels - SLS
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped "rotating" cable solution, selected and tested by FACOM, maintains
user ergonomics.
• Slim profile chisel.
• Chrome vanadium forged steel, treated 57 HRc on edge and 40 HRc on impact head.
• Blade width: 26 mm.
26
A [mm]
L [mm]
26
235
www.facom.com
L [mm]
L1 [mm]
35
40
50
60
305
310
320
330
112
117
120
145
[kg]
0,725
0,865
1,170
1,690
d
207A.SLS - Adaptable-tip mallets - SLS
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped "rotating" cable solution, selected and tested by FACOM, maintains
user ergonomics.
• Aluminum body "light" series hammers.
• Mallets are available with a limited number of tip combinations only, but you can
customize your mallet by selecting a body and two tips of your choice.
• Tips available:
- EA series: neoprene.
- EB series: polyurethane.
- EC series: nylon.
207A.32CBSLS
207A.40CBSLS
d [mm]
Finish
32
40
Aluminium
Aluminium
[kg]
0,235
0,375
208A.SLS - Adaptable-tip mallets - SLS
• Tool equipped with a FACOM SLS attachment solution, preventing any risk of
accidental falls.
• The crimped "rotating" cable solution, selected and tested by FACOM, maintains
user ergonomics.
• Steel body "heavy" series hammers.
• Mallets are available with a limited number of tip combinations only, but you can
customize your mallet by selecting a body and two tips of your choice.
• Tips available:
- EA series: neoprene.
- EB series: polyurethane.
- EC series: nylon.
208A.32CBASLS
208A.40CBASLS
259SLS
d [mm]
[kg]
0,275
0,405
0,605
0,985
1,165
L2
A
10
Hammers
d [mm]
Finish
32
40
Brass
Brass
[kg]
0,370
0,640
[kg]
0,265
www.facom.com
27
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising