PowerPak (PE-09N, PE-08I) Data Sheet

PowerPak (PE-09N, PE-08I) Data Sheet
Pakedge® PowerPak 9 and PowerPak 8I
Power Distribution Units
Pakedge PowerPak 9 and PowerPak 8I
Power control is the first line of defense in bringing a system or device back online. The Pakedge PowerPak 9 and 8I Power Distribution
Units give integrators unprecedented convenience and control for all of the critical equipment in an AV and home automation rack.
Surge protected and BakPak enabled, the Pakedge PowerPak series PDUs are purposefully designed for connected homes and allow
dealers to have even greater insight and control over a customer’s connected home.
The PowerPaks have robust monitoring capabilities for input voltage, frequency, individual outlet current, and temperature (sensor sold
separately). The user-defined alerts can trigger actions based on these measurements, sound an audible buzzer, and send notifications.
With the integration of the PowerPak 9 or 8I into the BakPak Cloud Management System, all of these features are available remotely
in a global network view. Connected devices can be managed as groups for efficiency or individually and port-by-port with named
outlets for specificity. The elegant OLED display enables per-outlet control and monitoring as well as network information to help with
PowerPak setup. Devices can be rebooted from the OLED or remotely. Power on and power off sequencing can be configured in the
graphical user interface (GUI) to ensure safe restart and optimal network functionality.
Key features:
• Configurable power-up and shutdown: Configure the PowerPak to power on/off connected devices in any order for devicedependent hardware and to protect sensitive equipment against power flooding.
• Secure network control: The PowerPak is fully IP addressable using the built-in, secure Web interface.
• Web-based monitoring: Monitor the realtime and historical current and power usage of each PowerPak outlet, along with the input
voltage and frequency.
• Configurable alerts: Define visual, audible, and email alarms with full logging for self-healing, input voltage, current, and
temperature (sensor sold separately).
• Surge protection: Provides up to 6kV surge protection to your devices with voltage protection rating (VPR) of 500V for the
PowerPak 9 with NEMA outlets and 800V for the PowerPak 8I with IEC outlets.
• Global, remote management with BakPak when on a network with a Bakpak Management Agent.
• Ports can be assigned daily schedules for ultimate convenience, security, and energy saving.
• SDDP integration makes it easy to add a PowerPak PDU to any Control4 project.
Pakedge PowerPak 9 and PowerPak 8I
Model number
PowerPak 9 (PE-09N), PowerPak 8I (PE-08I)
Input voltage/current
PowerPak 9: 100-120VAC, 50~60 Hz, 12A
PowerPak 8I: 100-240VAC, 50~60 Hz, 10A
Output voltage/current
PowerPak 9: 100-120VAC, 12A, 50~60 Hz
Load capacity: 1440W (total)
PowerPak 8I: 100-240VAC, 10A, 50~60 Hz
Load capacity: 2400W (total)
Inlet type
IEC60320 C14
Outlets/Type
PowerPak 9: NEMA 5-15R, 8 individually controllable outlets
PowerPak 8I: IEC60320 C13, 8 individually controllable outlets
Circuit breaker
PowerPak 9: 15A
PowerPak 8I: 12A
Console port specs
Baud rate: 115200
8 data bits, no parity, 1 stop bit, no flow control
Filtration
30dB at 100 kHz
53dB at 1 MHz
Surge protection
Up to 6kV, surge board is UL1449 rated
Voltage protection rating (VPR)
500V for PE-09N
800V for PE-08I
Peak impulse current
20,000A
Environmental
Operational temperature
Storage temperature
32˚F ~ 113˚F (0˚C ~ 45˚C)
-13˚F ~ 140˚F (-25˚C ~ 60˚C)
Humidity
10% to 90% RH, non-condensing
Miscellaneous
Dimensions
17.15 × 11.48 × 1.75 in. (435.6 × 291.6 × 44.5 mm)
Weight
Shipping weight
7.2 lbs. (3.27 kg)
PowerPak 9: 11.35 lbs. (5.15 kg)
PowerPak 8I: 10.95 lbs. (4.97 kg)
Display
OLED display
Surge protection LED
Outlet LED
SD card reader
SD card must be formatted to FAT32
Network protocols
ICMP, IP, TCP/UDP, DHCP, Telnet, DNS, SMTP, HTTP
Monitoring
Individual outlet monitoring and control
Web-based monitoring via Pakedge BakPak Network Management
System
Power cord length
6 ft. (1.8 m)
MOST RECENT PDF VERSION
pkdge.co/pp-ds
USER GUIDE
pkdge.co/pp-ug
Copyright ©2017, Control4 Corporation. All rights reserved. Pakedge, Control4, the Control4 logo, the 4-ball
logo, 4Store, 4Sight, Control4 My Home, and Mockupancy are registered trademarks or trademarks of Control4
Corporation in the United States and/or other countries. All other names and brands may be claimed as the
property of their respective owners. All specifications subject to change without notice.
DOC-00267-A
2017-04-17 MS
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising