LTC 0495 Series Dinion Day/Night Cameras 540 TVL

LTC 0495 Series Dinion Day/Night Cameras 540 TVL
CCTV | LTC 0495 Series DinionXF Day/Hight Cameras - 540 TVL
LTC 0495 Series
DinionXF Day/Night Cameras
540 TVL
• 15-bit DSP Technology
• High sensitivity
• Mechanically switching IR filter for
IR sensitivity at night
• XF-Dynamic for unsurpassed
wide dynamic range
• Bilinx Communication for remote
set-up and control
• Default Shutter eliminates motion
• Four area video motion detection
• 540 TVL resolution
The LTC 0495 High Performance 1/3-inch Digital CCD
Day/Night Camera ensures the highest image quality possible
at any time. Depending on the available light the camera will
automatically switch from color to monochrome.
A unique combination of 15-bit digital video processing that
enhances sensitivity and XF-Dynamic which extends the
dynamic range provides a sharper, more detailed image with
outstanding accuracy in color reproduction.
All Dinion cameras are supplied ready to operate. Simply
attach and focus the lens, then connect power. No tools are
required for back focus and power connection. For especially
challenging situations where fine tuning or special settings are
required, the camera parameters can be individually set using
the control buttons on the side of the camera and On-screen
Display (OSD). The camera automatically detects the lens
type. The Lens Wizard ensures accurate back-focusing for
perfectly sharp pictures at all times.
Security you can rely on
The highly accurate 15-bit digital signal is automatically
processed to optimally capture the detail in both the high and
low light areas of the scene simultaneously, maximizing the
information visible in the picture.
Bilinx Technology
Bilinx is a bi-directional communication capability embedded
in the video signal of all Bosch Dinion cameras. Technicians
can check status, change camera settings and even update
firmware from virtually anywhere along the video cable. Bilinx
reduces service and installation time, provides for more
accurate set-up and adjustment, and improves overall
performance. In addition, Bilinx uses the standard video cable
to transmit alarm and status messages, providing superior
performance without additional installation steps.
2 | LTC 0495 Series DinionXF Day/Hight Cameras - 540 TVL
Video Motion Detection
The built-in video motion detector allows you to select up to
four fully programmable areas with individual thresholds. The
global scene change detector minimizes false alarms caused by
sudden lighting condition changes, such as switching on or off
the indoor or security lighting. When motion is detected
alarms may be displayed in the video signal while the output
relay can be closed in addition to alarm message transmission
on Bilinx.
Auto Black
The automatic black level feature enhances contrast by
compensating for reduced contrast (i.e. glare, fog, mist).
Default Shutter
The LTC 0495 features a fast, default shutter speed in sufficient
lighting conditions to capture moving objects. When light
levels fall and other adjustments have been exhausted, the
shutter speed reverts to the standard setting to maintain
By increasing the integration time on the CCD up to 10 times,
the effective sensitivity is dramatically enhanced. This is
especially useful when relying only on moonlight for
Parts Included
LTC 0495 Series DinionXF
C/CS – mount conversion ring
Spare male 4 – pin lens connector
Certifications and Approvals
Electro Magnetic Compatibility
EN55022 class B, FCC class B part 15
EN50130-4 Alarm Systems, Part 4
Camera with 500 gr (1.1 lbs) lens according
to IEC60068-2-27
EN60065 (/11 and /51 models)
UL6500, cUL CAN/CSA E60065-00 (/20 and /60 models)
Installation/Configuration Notes
117 (4.606")
85 (3.346)
33 (1.30)
Lens Wizard
The Lens Wizard automatically detects the lens type and helps
focus the lens at the maximum opening to ensure proper focus
is maintained throughout the 24-hour cyle. No special tools or
filters are required.
DinionXF Day/Night Camera
67 (2.638")
1/4"-20 UNC
59 (2.323")
Back Light Compensation (BLC)
Offering a fully programmable BLC area of interest, and a
variable BLC level, the camera can be easily set up for even the
most challenging entrance applications.
DinionXF Day/Night Camera
1/4"-20 UNC
48 (1.889")
122 (4.803")
Dimensions in mm (inches).
133 (5.236")
Programmable Modes
Three independent, preprogrammed operating modes
support typical applications, but are fully programmable for
individual situations. Switching between modes is easy via
Bilinx or the external alarm input.
Day/Night Mode
The Day/Night Mode LTC 0495 provides enhanced night
viewing by increasing the IR sensitivity. The IR filter can
switch from color to monochrome automatically by either
sensing the illumination level or via the alarm input. The filter
can be switched manually via the alarm input, through the
camera menu or via the Bilinx coaxial control interface. An
internal through the lens IR detector enhances the
monochrome mode stability, as it prevents reverting to the
color mode when IR illumination is dominant.
DinionXF Day/Night Camera
Dimensions in mm (inches)
LTC 0495 Series DinionXF Day/Hight Cameras - 540 TVL | 3
Technical Specifications
Type No.
CCD type
Active pixels
Remote control
Power Consumption
LTC 0495/61
Power Supply
752 x 582 (PAL)
45 - 65 Hz
11 - 39 VDC
768x492 (NTSC)
/51, /61
110 - 240 VAC
45 - 65 Hz
0.59 lux / 0.08 lux (Monochrome mode)*
0.24 lux / 0.038 lux (Monochrome mode)*
12 - 28 VAC,
2.4 lux*
50 IRE
/11, /21
1/3-inch interline
(Full video)
Bilinx coaxial communication
0.024 lux / 0.0038 lux (Monochrome mode)
59 x 67 x 122 mm
(H x W x L)
(2.28 x 2.6 x 4.8 inch) without lens
450 g (0.99 lbs) without lens
Tripod mount
Bottom (isolated) and top 1/4-inch 20 UNC
OSD with softkey operation
with Sensup
Min. Resolution
540 TVL
Operating Temperature
-20°C to +50°C (-4°F to 122°F)
> 50 dB
Storage Temperature
-25°C to +70°C (-13°F to +158°F)
Ambient humidity
20% to 93% RH, storage up to 98% RH
Video output
Y/C output
1 Vpp, 75 Ω
Y: 1 Vpp / C: 0.3 Vpp
Internal, Line Lock, HV-lock and Genlock
(Burst lock) selectable
Auto (1/60 (1/50) to 1/500000), Fixed, Flickerless,
Sensitivity up
Auto Black
Dynamic Noise
Off, Automatic continuous up to 10x
On, Off selectable
32x dynamic range enhancement
Auto, Off selectable
Sharpness enhancement level selectable
Off, Area and Level selectable
Auto (maximum level selectable to 28 dB)
Lens Mount
CS (max lens protrusion 5 mm, 0.2 inch)
or fixed level selectable
White balance
ATW (2500 - 10000 K), AWB hold,
Manual WB selectable
Alarm output
Alarm Input
4 area, sensitivity selectable
VMD or Bilinx
Profile switching, +5 V nominal, +40 VDC max
Alarm Output
External sync
max. 30 VAC or +40 VDC, Max 0,5 A continuous,
10 VA
75 Ω or High Impedance selectable
Up to 1000 m (3000 ft) coax without external
amplifiers (automatic set-up in combination with
Camera ID
16 character editable string, position selectable
Lens types
Manual, DC and Video Iris auto-detect with
coaxial communication)
override DC-IRIS drive: max 50 mA
Video iris: 11.5 ± 0.5 VDC, max 50 mA
4 | LTC 0495 Series DinionXF Day/Hight Cameras - 540 TVL
Ordering Information
Model & Description
LTC 0495/11 DinionXF Day/Night Cameras
DinionXF, 1/3-inch Day/Night, PAL, Low Voltage
LTC 0495/21 DinionXF Day/Night Cameras
DinionXF, 1/3-inch Day/Night, NTSC, Low Voltage
LTC 0495/51 DinionXF Day/Night Cameras
DinionXF, 1/3-inch Day/Night, PAL, High Voltage
LTC 0495/61 DinionXF Day/Night Cameras
DinionXF, 1/3-inch Day/Night, NTSC, High Voltage
LTC 3364/40 Varifocal Lens
1/3-inch DC-IRIS, 2.8-11 mm F1.4-360 - IR
Hardware Accessories
LTC 3364/21 Varifocal Lens
1/3-inch Varifocal lens 2.8 – 6 mm, DC-IRIS, CS-mount f/1.4 200, 4 pin
LTC 3364/31 Varifocal Lens
1/3-inch Varifocal lens 3.5 – 8 mm, DC-IRIS, CS-mount f/1.4 200, 4 pin
LTC 3384/21 Zoom Lens
Zoom lens, DC-IRIS, 1/3-inch, 6 – 60 mm, CS-mount f/1.4-360,
TC120PS Power Transformer
PSU (110 – 120 VAC / 15 VDC, 300 mA, 50 / 60 Hz)
TC220PS Power Transformer
PSU (220 – 240 VAC / 15 VDC, 600 mA, 50 / 60 Hz)
TC220PSX-24 Power Transformer
Transformer (220 – 240 VAC / 24 VAC, 800 mA 50 Hz)
TC1334 Power Transformer
120 VAC, 60 Hz 24 VAC, 30 VA
Software Options
VP-CFGSFT Configuration Software
Configuration software for cameras using Bilinx. Includes VP-USB
Distribuidor autorizado: Alarmes Tucano Ltda
Rua Des. Antonio de Paula, 3577 - Curitiba - Pr
Fone/fax: (41) 3286-2867
Data subject to change without notice | Printed in Netherlands | | 18. Feb 2005
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF