panoram v16 - SJS Cycles
P ANOR AM V 16
DETAILED PARTS DESCRIPTION
INSTALLATION
16 function cycle computer
GB
ADJUST
Button
DISPLAY
A
FUNCTION
RPM
AR
MR
S
RPM
AR
MR
˚F ˚C
MODE
Button
M
DETERMINE WHEEL CIRCUMFERENCE FIRST
Wheel Circumference
Tire Size Designation
47-305
47-406
37-540
47-507
23-571
40-559
44-559
47-559
50-559
54-559
57-559
37-590
37-584
16 x1.75 x2
20 x1.75x2
24x1 3/8A
24x1.75x2
26x1
26x1.5
26x1.6
26x1.75x2
26x1.9
26x2.00
26x2.215
26x1 3/8
26x1 3/8x1 1/2
1217
1590
1948
1907
1973
2026
2051
2070
2089
2114
2133
2105
2086
3-1
2-4a
2-2 2-3
2-1
1. Computer Body
2. Computer Bracket Set
2-1 Computer Bracket
2-2 Spacer
2-3 Washer
2-4a M3 x 12mm Bolt
2-4b M4 x 23mm Bolt
2-4b
4-1
3-2
4-2
Release
Button
4-3
5-1
5-2 5-3 5-4 5-5
3. Wheel Sensor Set
5. Handlebar Bracket
5-1 Bracket (26.0~22.2)
3-1 Sensor Rubber Pad
5-2 Bracket (31.8~28.6)
3-2 Sensor (Transmitter)
5-3 Handlebar Bracket Bolt
with Zip Belt
5-4 Rubber Pad (Thin)
4. Wheel Magnet Set
5-5 Rubber Pad (Thick)
4-1 Wheel Magnet
6. Cadence Sensor Set
4-2 Magnet Ring
6-1 Sensor Zip Tie
4-3 Magnet Screw
(width: 3.5mm - 2 pcs)
KM/H:
Wheel Circumference
=mm x 3.14
Wheel Circumference
27x1 1/4
27x1 1/4 Fifty
28x1.5
28x1.75
28x1 1/2
28x1 1/8x1 5/8
700x18c
700x20c
700x23c
700x25c
700x28c
700x32c
700x35c
700x40c
2199
2174
2224
2268
2265
2205
2102
2114
2133
2146
2149
2174
2205
2224
Option B
7-2
6-2 Sensor Rubber Pad
6-3 Sensor (Transmitter)
6-3a Sensor Base
6-3b Sensor Mount Arm
6-3c Sensor Housing
7. Cadence Magnet Set
7-1 Cadence Magnet
7-2 Magnet Zip Tie
(width: 2.5mm - 2 pcs)
23mm
Max. 5mm (0.2")
90˚
A˚< 15˚
3
Cadence Sensor/Magnet Set
FUNCTION
+
LR44
-
BIKE 1:
mm X 3.14
CR2032
-
SHOWN ON SCREEN
READ ON SCREEN
SPECIFICATIONS
INCREMENTS ACCURACY
99.9 KM/H, 99.9 M/H
over 99.9 "99.9" will apprear
0.1 KM/H or M/H
Average speed
30.0 KM/H
99.9 KM/H, 99.9 M/H
0.1 KM/H or M/H
Maximun speed
45.0 KM/H
99.9 KM/H, 99.9 M/H
0.1 KM/H or M/H
SPD > AVG
Unit selection
KM/H
Current Cadence (RPM)
RPM
Maximun Cadence (RPM)
_+1 %
_+0.1 %
_+0.1 %
SPD < AVG
AR
MR
Current temperature
NOTE: During non-ride periods, never leave wheel magnet next
to fork sensor. This will shorten sensor battery life.
˚C
30
0~199
1
45
0~199
1
80
0~199
1
25˚C
-10˚C~60˚C (14˚F~140˚F)
_
+2˚C
0~3999
1 mm
Ride time
18M52S
0:00:00~99:59:59
1 Second
Accumulated ride time
130H7M
0:00:00~99999:59
1 Minute
12H/24H clock
7H19M0S AM (12H)
1 Second
Trip Time (Stopwatch)
1H14M26S
1:00:00~12:59:59 (12H)
0:00:00~23:59:59 (24H)
0:00:00~99(H):59(M):59(S)
Button lock
lock
Distance
5.8 KM
0.0~999.9 KM or M
0.1 KM or M
Accumulated distance
999.8 KM
0.0~99999.9 KM or M
0.1 KM or M
Low battery indicator
low battery
< 2.6 V
BIKE1: 2265mm, BIKE2: 2050mm
1 Second
_+0.1 %
_+0.1 %
_+0.003 %
_+0.003 %
_+0.1 %
_+0.1 %
NOTE: Either A or B is not
installed properly, input
signal will be weak.
< 10
A Le
ngt
h
Sensing
Zone
00 m
m (3
9.4"
)
Align center
of magnet
with either
sensing zone.
B B˚< 15˚
Sensing
Zone
GAP < 5mm (o.2")
1. The TOPEAK PANORAM cycle computer can
Sensor with Transmitter:
No Contact Magnet sensor
with Wireless Transmitter.
Wireless Sensing Distance: 75cm (29.5") between the sensor
(transmitter) and the
computer body.
Cross-Talking Interference: Within 40 cm (15.8"), no interference
by 2 bicyclescarrying similar cycle
computers,even when ridden side
by side.
Wheel Circumference Setting: 0mm - 3999mm (1mm increment)
Operating Temperature:
0˚C ~ 60˚C (32˚F ~ 140˚F)
Storage Temperature:
- 20˚C ~ 80˚C (-4˚F ~ 176˚F)
Main Unit Battery Power: 3V battery x 2 (CR2032), Battery life,
approximately 1.3 years. (Based on
an average of 1.5 hours use per day)
Transmitter Battery Power: 1.5V battery x 1 (typical LR44). 15,000
miles riding distance, or approximately
2 years.
Dimensions/ Weight:
Computer Body: 66 x 36 x 18 mm/ 32.2 g
Sensor(Transmitter): 20.0 mmø x 48.0 mm/ 13 g
29.0 mmø x 49.3 mm/ 20 g
be used in the rain but should not be
used underwater.
2. Do not leave the main unit exposed to direct
sunlight when not riding the bicycle.
3. Do not disassemble the computer body
or its accessories.
4. Check relative positions and gap between
sensor and magnet periodically.
5. Clean the bracket contacts and the button
of the computer body periodically.
6. Do not use harsh chemicals to clean the
computer body or its accessories.
7. Remember to pay attention to the road
while riding.
TROUBLE SHOOTING
IMPORTANT NOTE
Check the following before bringing unit in for repair.
PROBLEM
CHECK ITEMS
REMEDY
No display
1. Is the battery exhausted?
2. Is the battery installed correctly?
1. Replace the battery.
2. Make sure that the positive (+) pole of the battery is facing the battery cap.
No current
speed or
incorrect
data
1. Is it in setup mode?
2. Are the contacts between the computer body and the bracket poor?
3. Are the relative positions and gap between sensor and magnet correct?
4. Is the wheel circumference correct?
1. Refer to the data setting procedure and complete the adjustment.
2. Clean the contacts.
3. Refer to INSTALLATION and re-adjust correctly.
4. Refer to CIRCUMFERENCE SETTING and enter correct value.
Refer to "Clear All Data setting" and initiate the computer again.
Irregular display
Wheel circumference default: BIKE1-2155mm, BIKE2-2050mm
A. SETUP
LCD is black
Did you leave the main unit in direct sunlight when
not riding the bicycle for a long while?
Place the computer body in the shade to return to normal state.
Display is slow
Is the temperature below 0˚C (32˚F)?
The unit will return to normal state when the temperature rises.
When using the Topeak Panoram wireless
cycle computer and any Topeak light with
powerpack simultaneously, it is advised to
mount the light as shown.
B. NORMAL DATA SETTING (NON-RIDING STATUS)
TRIP TIME (STOPWATCH)
A ADJUST
Button
NOTE: During non-ride periods,
never leave cadence magnet
next to its sensor. This will
shorten sensor battery life.
M3 x 12mm
NOTE:
The sensor battery is supplied,
but not installed. Install the
sensor battery before using
the computer.
A˚
Sensing
Zone
M3 x 12mm
CR2032
CR2032
BIKE 2:
26.7 KM/H
Average Cadence (RPM)
Crank-arm
Sensing Zone
+
Current speed
Bike1/Bike2 wheel circumference setting
DST
ODO
7-1
PRECAUTIONS
Speed pace indicator
RPM
AR
MR
˚F ˚C
6-2 6-3
CHANGING BATTERIES
RANGE
DISPLAY
6-1
+
LR44
-
METHOD B). WHEEL CIRCUMFERENCE MEASUREMENT
Tire Size Designation
32-630
28-630
40-622
40-622
40-635
37-622
18-622
20-622
23-622
25-622
28-622
32-622
35-622
40-622
12mm
6-3a
1
WHEEL CIRCUMFERENCE OF MY BIKES
METHOD A). WHEEL CIRCUMFERENCE REFERENCE TABLE
Option A
M3 x 12mm
f
DST
ODO
Contact
Wheel Sensor/Magnet Set
(2.5
Trip Time (Stopwatch)
Button lock
Distance
Accumulated distance
Low battery indicator
M3 x 12mm
2
Comupter / Handlebar Bracket Set
5c m
L < 7 eet)
Battery
Cover
Art. no. TPC-13
6-3b
Maximun speed
Speed pace indicator
Unit selection
Current Cadence (RPM)
Average Cadence (RPM)
Maximun Cadence (RPM)
Current temperature
Bike1/Bike2 wheel circumference setting
Ride time
Accumulated ride time
12H/24H clock
SET
Button
˚F
˚C
1
6-3c
ACCESSORIES (Fits all size handlebar)
Current speed
Average speed
S
SET
Button
˚C
Press and Hold
MODE
M Button
NOTE:
If no data is entered for 20
seconds, the screen will switch
to Screen 1 automatically.
A1. CLEAR ALL DATA
RPM
AR
MR
3sec
˚F
˚C
A
or
M
or
S
RPM
˚C
SCREEN 1
RPM
S
˚C
S
S
˚C
2sec
M
LOCK MODE
AR
SCREEN 2
QUICK WAY TO CHANGE 24H TO 12H CLOCK FORMAT
RPM
˚C
˚C
2sec
M
RPM
A
M
AR
RPM
˚C
Press
A
+
M
+
S
Clear Trip Time (Stopwatch) Data
RPM
RPM
˚C
A
S
˚C
2sec
CLEAR DATA
(AS, DST, MS, RT, TRIP TIME)
AR
When DST over 999.9 or RT over
99:59:59, E r r will appear. Use
CLEAR DATA function, to erase
DST & RT data.
NORMAL DATA
A2. UNIT SELECTION
S
A
A
+
S
M
AR
˚C
2sec
AR
BIKE1
˚C
MR
SCREEN 4
A
M
˚C
2sec
RPM
˚F
˚C
SLEEP MODE
˚C
SCREEN 3
BIKE2
During non-riding status, if no
button is touched for 20
minutes, the screen will go into
Sleep Mode. Screen will wake
up by touching any button.
5sec
M
2sec
SCREEN 5
S
A
+
S
RPM
A3. BIKE1
CIRCUMFERENCE
SETTING
• • •
S
S
M
˚C
2sec
When in Trip Time mode and not riding, the computer will enter Sleep Mode if no buttons
are pressed for 20 minutes. (Trip Time symbol will flash). The computer will wake up
by pressing any button.
CLOCK
RESET DATA
˚C
MR
2sec
4sec
AR
TRIP TIME (STOPWATCH)
AR
˚C
M
A
NOTE:
digit 0~9
RPM
A
˚C
SCREEN 1
S
A
S
S
During non-riding status, if no button is
touched for 20 minutes, the screen will go
into Sleep Mode. Remember to touch any
button to wake up the screen before riding.
• • •
M
A
A
digit 1~12 (12H) /
digit 0~23 (24H)
S
2sec
• • •
S
˚C
digit 0~5
2sec
S
2sec
˚C
M
SCREEN 3
RPM
˚C
S
LOCK MODE
RPM
˚C
M
>5 sec
˚C
2sec
REBUILD KIT
WARRANTY
2-year Warranty: All electronic and mechanical components
against manufacturer defects only. Batteries are not covered
under any implied warranty.
M
Warranty Claim Requirements
To obtain warranty service, you must have your original
sales receipt. Items returned without a sales receipt will
assume that the warranty begins on the date of
manufacture. All warranties will be void if PANORAM V16
cycle computer is damaged due to user crash, abuse,
system alteration, modification, or used in any way not
intended as described in this operating manual.
* The specifications and design are subject to change without notice.
M
A
A
digit 0~9
digit 0~9
SCREEN 4
CLEAR DATA
˚C
MR
(AS, DST, MS, RT, TRIPTIME)
>5 sec
S
RPM
A
+
S
M
RPM
A6. BIKE1 ART SETTING
S
• • •
S
2sec
˚C
SCREEN 5
2sec
A
digit 0~9
˚C
MR
>5 sec
A
digit 0~5
˚C
4. Before changing the computer battery,
write down the stored data, ODO and
ART. All data for Bike1 and Bike2 will be
erased automatically when replacing the
battery. However, this computer will
allow you to re-enter your stored data.
See steps A5 and A6 in the Setup section.
>5 sec
AR
RPM
S
SCREEN 2
NORMAL DATA
S
A5. BIKE1 ODO SETTING
A
digit 0~9
RPM
˚C
S
2sec
Clear Trip Time (Stopwatch) Data
RPM
AR
1. CLEAR ALL DATA SETTING will clear all
stored data.
3. KM/H or M/H selection is only available
from CLEAR ALL DATA SETTING.
TRIP TIME (STOPWATCH)
M
A4. CLOCK SELECTION
NOTE
2. CLEAR ALL DATA SETTING is required
during initial setup or after a
battery change.
A
digit 0~3
M
˚C
A
C. NORMAL DATA SETTING (RIDING STATUS)
M
2sec
2sec
˚C
M
2sec
˚C
Topeak products are available only from
professional bicycle shops.
art no. RK-TPC13
Please contact your nearest Topeak authorized
bicycle dealer for any questions.
For customers in the USA, call: 1-800-250-3068
Website: www.topeak.com
Copyright © Topeak, Inc. 2009
M-TPC13-GB 5/09
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising