AbrasiMet™ 250

AbrasiMet™ 250
AbrasiMet™ 250
Manual Abrasive Cutter
Solutions for Materials Preparation, Testing and Analysis
AbrasiMet™ 250 - Bench-Top Abrasive Cutter
The AbrasiMet 250 Manual Abrasive Cutter features manual cutting action with best in class lighting, visibility and cut capacity. With
its large workspace and versatile vising options, this cutter enables simple, quick and easy positioning of samples for cutting and
sectioning. When combined with the PetroCut™ Vise Table, the AbrasiMet 250 becomes a highly versatile Petrographic or Geological
cutting tool.
Simple Operation
Viewing
• On/Off Controls
• Emergency Stop
• Large viewing window
• Unobstructed view of sample
Reliability
Lighting
• Ten bright, high
efficiency LED lights
• Long, flexible gooseneck
LED light allows for easy
positioning to further
illuminate the workspace
• Electronics completely
isolated from wet
environment of cutting
chambers
Chop Action
Cutting
• Manual chop handle,
provides tactile feedback
• Fast easy cuts
• Uses 10in [254mm]
abrasive wheels
Safety
• Hood lock prevents
cutting while hood is
open and locks hood
shut while machine is in
operation
Storage
• Convenient storage
drawer for hand tools
required for setup and
operation
Large Workspace
• Ample work area for
large parts
• Facilitates multiple vising
options
Cleanability
• Externally mounted
cleaning nozzle stays dry
• Switch flow to the nozzle
for easy washdowns
At a Glance
• Largest cutting window for this class of cutting tool
• Bright, energy-efficient LED lighting for highly visible, clear
and unobstructed viewing of samples, cut location, vising and
cut progress
• Easy-to-use with minimal operator training
• Open workspace allowing quick and easy placement of
samples
• Spray Hose for efficient cleaning and washdown of the
cutting chamber
• Convenient, removable basket helps catch small parts when
cutting
Left (10-2170) and Right (10-2171) Sliding
Vises, for general purpose clamping of
specimens.
Left (95-C1821) and Right (95-C1822)
MetKlamp™ Vises, for clamping of
specimens such as rods, bars, tubes, etc.
Helpful and convenient, removable basket
helps catch small parts when cutting.
PetroCut™ Vise Table & Rock Clamp Kit:
10-3531 Speed Vises for clamping of
irregularly shaped specimens
10-10106-000 PetroCut Vise Table and Rock Clamp Kit (includes PetroCut Vise
Table with X-Y positioning, and two Rock Clamps, suitable for incorporation in
AbrasiMet™ 250). The PetroCut Vise Table may move 2in [51mm] side-to-side
(X-Direction) and 3.125in [79mm] front-to-back (Y-Direction).
10-10106-001 Rock Clamp Kit (includes two replacement Rock Clamps and posts
suitable for mounting samples on PetroCut Vise Table)
Convenient tool storage drawer on the side
of the AbrasiMet 250 houses all hand-tools
required for setup and operation.
Adding a PetroCut Vise Table and Rock Clamp Kit to an AbrasiMet 250 converts the
general purpose cutter into a highly competent Petrographic or Geological cutting
tool.
Specifications
Motor Power & Consumption
4Hp [3kW]
Current
13amps @ 230VAC; 6.5amps @ 460VAC; 7.5amps @ 400VAC
Wheel Speed
2800rpm @ 50Hz; 3400rpm @ 60Hz
Lighting
10 bright, high efficiency LED lights. One 18in [457mm] flexible gooseneck LED light
Sound Rating
≤76 db under no load at a distance of 39in [1m]
Coolant Tank Capacity
7gal [27ℓ]
Abrasive Wheel Diameter & Arbor
10in [254mm] diameter; 1.25in [32mm] Arbor
Maximum Cutting Capacity
3.75in [95mm]
Side Port Dimensions
3 x 3in [76 x 76mm]
Vise Table Dimensions
9.5 W x 9.875in D [240 x 250mm]; 12mm T-slots
Compliance
CE
Visit our website at www.buehler.com for more information.
AbrasiMet™ 250 Abrasive Cutter
• Manual operation, 4Hp
• 10in [254mm] wheel capacity
• 12mm T-Slot stainless steel bed
• Includes mechanical brake
• Compatible with PetroCut™ Vise Table & Rock Clamps
22.5in
[571mm]
(Recirculating system and vising not included)
Part Number
Voltage/Frequency
10-10106-260
200-240VAC, 60Hz
10-10106-460
440-480VAC, 60Hz
10-10106-250
200-240VAC, 50Hz
10-10106-400
380-400VAC, 50Hz
29in
[737mm]
28in
[711mm]
Approx. Weight: 300 lbs [136kg]
Accessories for AbrasiMet 250
16-1497
10-3531
10-3532
95-C1702
10-2170
10-2171
95-C1821
95-C1822
80-10001
10-2165-260
Cart with wheels, for recirculating tank
Speed Vise Kit
Riser Block for Speed Vise
Fastener Vise, for use in sliding vise
Left Sliding Vise
Right Sliding Vise
Left MetKlamp™ Vise
Right MetKlamp Vise
Heavy Duty Table with Cabinet
Recirculating Tank, 7gal [27ℓ], [200-240VAC,
60Hz]
10-2165-460 Recirculating Tank, 7gal [27ℓ], [380-460VAC,
60Hz]
10-2165-250 Recirculating Tank, 7gal [27ℓ], [200-240VAC,
50Hz]
10-2165-400 Recirculating Tank, 7gal [27ℓ], [380-400VAC,
50Hz]
PetroCut Vise Table & Rock Clamps
10-10106-000 PetroCut Vise Table and Rock Clamp Kit
(includes PetroCut Vise Table, and two Rock Clamps, suitable
for incorporation in AbrasiMet 250)
10-10106-001 Rock Clamp Kit
(includes two replacement Rock Clamps and posts suitable for
mounting samples on PetroCut Vise Table)
Consumables for AbrasiMet 250
MetAbrase™ Abrasive Wheels 10in [254mm], 10 pack
Recommended Use
Catalog Number
Cool 2 Cutting Fluid
Size
Catalog Number
SuperAlloy
12-4205-010
33.8oz [1ℓ]
41-10102
HRC 60+
10-4210-010
1gal [3.8ℓ]
41-10103
HRC 50-60
10-4212-010
5gal [191ℓ]
41-10104
HRC 35-50
10-4216-010
HRC 15-35
10-4220-010
Delicate Cutting
10-4227-010
Non-ferrous, hard materials
10-4245-010
Non-ferrous, soft materials
10-4250-010
Shop online at www.buehler.com. (US, DE, FR and UK only)
For a complete listing of consumables, visit our website at www.buehler.com or refer our Product Catalogue. Buehler continuously makes product improvements; therefore
technical specifications are subject to change without notice.
© 2013 BUEHLER, a division of Illinois Tool Works Inc.
BUEHLER Worldwide Headquarters
41 Waukegan Road
Lake Bluff, Illinois 60044-1699 USA
P: (847) 295-6500
www.buehler.com | info@buehler.com
BUEHLER France
info.fr@buehler.com
BUEHLER Japan
info.japan@buehler.com
BUEHLER United Kingdom
info.uk@buehler.com
BUEHLER China
china@buehler.com.hk
BUEHLER Germany
info.eu@buehler.com
BUEHLER Canada
info@buehler.ca
BUEHLER Asia-Pacific
info@buehler.com.hk
Printed in U.S.A.
FN01463_1013
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising