Eizo | MX210 | Datasheet | Eizo RadiForce MX210

Cli ni cal R eview M o ni t o rs
All product names are trademarks or registered trademarks of their respective companies.
EIZO, RadiForce, FlexScan, ScreenManager, RadiCS and RadiNET are registered trademarks of
Eizo Nanao Corporation. Specifications are subject to change without notice.
Copyright © 2011 EIZO NANAO CORPORATION. All rights reserved. Printed in Japan, 10, 2011, 4K (111003)
Selecting the Optimum Monitor for Clinical Review
Future Focused
EIZO’s complete spectrum of RadiForce medical monitor solutions delivers
exceptionally accurate and stable image display at leading hospitals around the world.
Display Differs Depending Upon Grayscale Tones
Standard monitors for general office use have grayscale tone characteristics which may vary even between the
same models. In the medical field, monitors must display medical images accurately and consistently. Digital
Imaging and Communications in Medicine (DICOM) Part 14 specifies a display function for grayscale which is
now used as a standard to adjust the grayscale tone characteristics of monitors used in the medical field.
Medical Image
Grayscale Tones
Different Grayscale Tones
Gamma 2.2
Our commitment to technological innovation includes making products
DICOM Part 14
Log-Linear
CIE
that are as ergonomically, environmentally, and economically-friendly as possible.
Monitor A
With the shift to completely filmless systems for improved efficiencies in patient care,
Cost - Efficiency Demanded Under Clinical Review Applications
Medical images can now be reviewed with clinical record applications. However, it is costly for hospitals to
install high-performance, DICOM calibration compatible diagnostic monitors throughout the entire
hospital, and a cost-efficient solution is demanded for clinical review application usage environment.
High - Performance
Diagnostic Monitor
Cost - Efficient
Clinical Review Monitor
Calibration to the DICOM Part 14 Compliant and
Superior Cost Performance Monitor is Optimum for Clinical Review
With the bundled RadiCS LE quality control software installed, a built-in backlight sensor periodically checks
for brightness irregularities of RadiForce MX-Series monitors. Furthermore, simplified calibration compliant
with the DICOM Part 14 standard can be periodically performed to correct the brightness and grayscale tones
of the monitor. Superior cost performance will be achieved when installing a large number of monitors
compliant to DICOM Part 14 in clinical review application usage environments.
Grayscale Tones
Grayscale
Brightness Calibration Grayscale
Brightness
and value that are truly future focused.
Same Image Looks Different.
Brightness
EIZO will continue to provide products of unsurpassed quality, consistency,
Monitor B
DICOM Part 14
Grayscale
03
Clinical Review Monitors
The RadiForce MX-Series of superior cost performance clinical review monitors deliver calibration that is compliant with DICOM Part 14. They are ideal for viewing patient charts with MRI and CT medical images in DICOM
Part 14 standard. In addition, they are available in widescreen and square formats in various resolutions to meet the
diverse needs of hospitals.
68 cm ( 27" ) Color LCD Monitor
61 cm ( 24.1 " ) Color LCD Monitor
61 cm ( 24.1 " ) Color LCD Monitor
Features
High-Definition Images
Diagnostic Precision with
DICOM Part 14 Factory Adjustment
To ensure the most accurate and consistent shadings possible, EIZO
carefully measures and sets every grayscale tones on the production
line to produce a monitor compliant with DICOM Part 14.
Large Screen Size and High-Resolution
Its 27-inch large screen size and a 2560 x 1440 high-resolution are
ideal for displaying multiple imaging applications or windows to
improve the work efficiency of physicians and radiologists.
Clinical Review
Application
Viewer
Application
Wide Viewing Angles for Multiple People Use
Thanks to the wide viewing angles and high contrast ratio of the
panel, images can be viewed simultaneously by several people with
the highest quality reproduction and minimal color shift.
3D Analysis
Application
Quick Brightness Stabilization for Instant Viewing
At startup or upon wakeup, the EIZO patented drift correction
function quickly stabilizes the brightness level. In addition, a sensor
measures the backlight brightness and compensates for brightness
fluctuations caused by the ambient temperature and the passage of
time.
Brightness
With Brightness stabilization
Preset Value
Grayscale Tones
Brightness
Brightness
Without Brightness stabilization
DICOM Part 14
Minutes
Multi Application
Simultaneous Display
Grayscale
Wide Viewing
Angle Image
Narrow Viewing
Angle Image
Grayscale
DICOM Preset Mode
Multi Window
Simultaneous Display
10-bit Color
View More with Widescreen
The widescreen 16:10 or 16:9 aspect ratio provides significantly more
horizontal space than the 4:3 or 5:4 aspect ratios of conventional
square monitors. The screen is wide enough so that you can keep tool
palettes open without
Square Wide
Square Wide
covering the window
you are working on.
MS-models feature a DICOM preset
mode whose grayscale tone is preset on
the production line for optimum reviewing
of medical images .
Each RGB color is supported with a 10-bit input compatibility that
displays more than 1 billion colors, providing smooth color tones for
3D color rendering and image fusion.
10-bit color graphics board and 10-bit color viewer software needed for 10-bit color display.
Consistency with DICOM Part 14
Simplified Calibration
With the bundled RadiCS LE quality control software, a simplified
calibration compliant with the DICOM Part 14 standard can be
performed to correct the brightness and grayscale tones of the
monitor by utilizing the backlight sensor.
Main Board
Backside
of Panel
Hole for
Light
Transmission
Backlight
Sensor
04
8-bit RGB
Environmentally-Friendly LED Backlight
By utilizing an energy-efficient LED as a
backlight, the monitor achieves a high-brightness.
Power consumption is reduced by 42% (EIZO’s
internal measurement.) compared to the same size
monitor with a conventional CCFL backlight.
Since the LED backlight is mercury free, it will
reduce any potential impact on the environment
when it is disposed of.
Displayed Image
Displayed Image
Ergonomic Features
Easy Calibration with Integrated Front Sensor
Integrated Front Sensor, housed within the front bezel, is conveniently
enabled and visible only when calibration compliant to the DICOM
Part 14 standard is being
performed. This dramatically
reduces the time and effort
needed for quality control.
10-bit RGB
Brightness Uniformity
for a Steadier Image Across the Screen
The Digital Uniformity Equalizer (DUE) function provides optimum
backlight luminance uniformity which is difficult to attain due to the
characteristics of LCD monitors,
especially with larger screen size.
Without DUE
With DUE
05
MX270W
48 cm ( 19" ) Color LCD Monitor
58 cm ( 23" ) Color LCD Monitor
58 cm ( 23" ) Multitouch Color LCD Monitor
43 cm ( 17" ) Color LCD Monitor
54 cm ( 21.3 " ) Color LCD Monitor
Features
Multitouch Interface
Mode Selection for Optimum Viewing
Both intuitive and enjoyable to work with, multitouch lets you tap,
scroll, drag, pinch, spin, etc. with your fingers instead of a mouse
and keyboard. The multitouch interface is supported by Windows 7
and works with the growing number of multitouch applications
compatible with this OS.
Selectable with the front panel buttons, the CAL Switch function
allows for various imaging modes of different modalities such as CR,
CT, and endoscope images.
High Quality Assurance
Presence Sensor for Power Savings
The presence sensor feature unites convenience with savings by
ensuring that the monitor conserves power when it is not in use. The
presence sensor prompts the monitor to switch to power save mode
when it detects the user is away from the monitor, and then resume
normal operation when the user returns.
Customer Assurance with Medical Standards
EIZO monitors meet the strictest medical, safety, and
EMC emission standards.
ISO 13485 Certification
Change modes
at the touch of
a button.
Drag
Switch to power save
at user’s absence
Pinch - out / in
[ MX240W Usage Example ]
Finger, Glove, or Pen Touch
Optical imaging touch panel technology accepts input from a bare or
gloved hand as well as a touch pen.
Handy Partitioning for Widescreen and
Multi-Monitor Environments
EIZO ScreenSlicer is a desktop monitor software utility that allows
an entire screen to be effectively used through partitioning. Multiple
windows can be easily aligned and dropped into the partitioned
areas in single- or multi-monitor environments for convenience.
Clinical Review
Application
Viewer
Application
Screen activates
at user’s presence
Acquiring ISO 13485 certification demonstrates EIZO’s
ability to consistently meet customer requirements for
our products and services.
Warranty with Safety and Trust
Energy Efficiency Gauge
To encourage environmental consciousness while working, an
on-screen gauge indicates energy consumption in correlation with the
screen’ s brightness. When the gauge is fully
illuminated, the monitor is operating at
optimum energy efficiency.
EIZO and its authorized distributors offer a five-year or three-year
limited warranty.
Brightness deterioration is not covered.
Versatile Positioning for
Improved Operability and Less Fatigue
EIZO’s highly versatile stand offers tilt, swivel, portrait rotation, and a
wide height adjustment range enabling you to use the monitor with
improved operability and less fatigue.
Boarder
(Gridline)
Tilt
Rotation
Examination List
06
Height Adjustment
Swivel
07
Quality Control Solutions
Monitor Quality Control Standards Compliance
Quality control tool RadiCS UX1 (sold separately) enables you to
perform basic quality checks necessary for clinical review monitors.
High-Performance Calibration with UX1 Sensor
By using the UX1 sensor (sold separately) with
the quality control software RadiCS (sold separately) or bundled RadiCS LE, high-performance
calibration compliant with the DICOM Part 14
standard can be performed.
Environmental Awareness
Clip-On Swing Sensor for Easy Calibration
Easy calibration compliant with the DICOM Part 14 standard can
be performed with the Clip-On Swing Sensor G2 (sold separately).
Once attached to the top of the monitor, it can remain in place and is
ready for use. This saves
the time and trouble of
attaching and removing
it when performing QC
tasks.
Presence Sensor for Smart QC Tasks
The presence sensor on the front of the Clip-On Swing Sensor G2
determines whether to start QC tasks such as calibrations automatically at scheduled times. If the user is working, the QC task stays in
stand-by mode, and when the user is away from the monitor the task
is performed.
Harmonizing with Environment and Society
We are conscious of the importance of environmental preservation as a common issue for all
humankind and pledge to do our utmost to protect the environment in all aspects of our corporate operations. We obtained ISO 14001 certification, and all our employees are committed to
the effective use of natural resources and energy, and also to reducing CO emissions causing
global warming.
Manufacturing Environmentally-Friendly Products
Based on our awareness that our products have an impact on the environment and our pledge to
consider respect for the environment as an integral part of product quality, we have continued to
lead the industry in our efforts to reduce the environmental impact of our products. In product
development, we vigorously work to ensure that our products comply with domestic and international legal requirements and environmental standards of third-party organizations.
Centralized Management of All Monitors
RadiNET Pro (sold separately) enables centralized management of
calibration tasks, history data of multiple RadiCS clients via a
network, and remote QC functions.
QC task in stand-by mode
while seated
QC task performed
while away
Accessory Compatibility
Clinic
Wall Mount Arm
Reading
Room
Server
Administrator
LA - 030 -W
LA - 011-W
Dual Height
Adjustable Stand
Panel Protector
LS - HM1- D
PANEL PROTECTOR
Monitor
Cleaning Kit
Modalities
FP -2702W *
FP -2400W
FP -2400W
FP -2301W
FP -2101
FP - 702
FP - 505
* Integrated Front Sensor unusable with panel protector.
08
09
Specifications
Cabinet Color
Black
Black, Gray
Black
Black, Gray-Black Two-Tone
Black
Black, Gray
Black, Gray
Black, Gray
Panel Type
TFT Color LCD Panel (IPS)
TFT Color LCD Panel (IPS)
TFT Color LCD Panel (VA)
TFT Color LCD Panel (VA)
TFT Color LCD Panel (VA)
TFT Color LCD Panel (VA)
TFT Color LCD Panel (VA)
TFT Color LCD Panel (VA)
Panel Size
68 cm / 27" (684 mm diagonal)
61 cm / 24.1" (611 mm diagonal)
61 cm / 24.1" (611 mm diagonal)
58 cm / 23" (584 mm diagonal)
58 cm / 23" (584 mm diagonal)
54 cm / 21.3" (540 mm diagonal)
48 cm / 19" (481 mm diagonal)
43 cm / 17" (432 mm diagonal)
Display Size (H x V)
596.7 x 335.6 mm
518.4 x 324.0 mm
518.4 x 324.0 mm
509.7 x 286.7 mm
509.7 x 286.7 mm
432.0 x 324.0 mm
376.3 x 301.0 mm
337.9 x 270.3 mm
Pixel Pitch
0.233 x 0.233 mm
0.270 x 0.270 mm
0.270 x 0.270 mm
0.2655 x 0.2655 mm
0.2655 x 0.2655 mm
0.270 x 0.270 mm
0.294 x 0.294 mm
0.264 x 0.264 mm
Native Resolution
2560 x 1440 (16:9 aspect ratio)
1920 x 1200 (16:10 aspect ratio)
1920 x 1200 (16:10 aspect ratio)
1920 x 1080 (16:9 aspect ratio)
1920 x 1080 (16:9 aspect ratio)
1600 x 1200 (4:3 aspect ratio)
1280 x 1024 (5:4 aspect ratio)
1280 x 1024 (5:4 aspect ratio)
Display Colors
10-bit colors (DisplayPort): 1.07 billion
(maximum) colors
8-bit colors: 16.77 million from a palette of
68 billion colors
10-bit colors (DisplayPort): 1.07 billion
(maximum) colors
8-bit colors: 16.77 million from a palette of
68 billion colors
16.77 million from a palette of 1.06 billion
colors
16.77 million from a palette of 1.06 billion
colors
16.77 million from a palette of 1.06 billion
colors
16.77 million from a palette of 1.06 billion
colors
16.77 million from a palette of 8.50 billion
colors
16.77 million from a palette of 1.06 billion
colors
Viewing Angles (H, V)
178°, 178°
178°, 178°
178°, 178°
178°, 178°
178°, 178°
178°, 178°
178°, 178°
178°, 178°
Brightness (typical)
300 cd/m2
320 cd/m2
320 cd/m2
250 cd/m2
300 cd/m2
300 cd/m2
300 cd/m2
250 cd/m2
Contrast Ratio (typical)
1000:1
1000:1
850:1
3000:1
3000:1
1000:1
2000:1
1500:1
Touch Panel Type
-
-
-
Infrared Optical Imaging
-
-
-
-
Surface Hardness
-
-
-
5.5 Mohs
-
-
-
-
Compatible OS
-
-
-
Multi-touch: Windows 7 64-bit and 32-bit
Single-touch: Windows Vista 64-bit and 32-bit
-
-
-
-
Communication Protocol
-
-
-
USB
-
-
-
-
Response Time (typical)
12 ms (On/Off), 8 ms (Midtone)
13 ms (On/Off), 5 ms (Midtone)
16 ms (On/Off), 6 ms (Midtone)
25 ms (On/Off), 7 ms (Midtone)
25 ms (On/Off), 7 ms (Midtone)
16 ms (On/Off), 8 ms (Midtone)
20 ms (On/Off), 8 ms (Midtone)
25 ms (On/Off)
Scanning Frequency (H, V)
31 - 89 kHz, 29.5 - 61 Hz (VGA Text: 69 71 Hz)
Digital: 31 - 76 kHz, 59 - 61 Hz (VGA Text:
69 - 71 Hz)
Analog: 24 - 76 kHz, 49 - 86 Hz (1600 x
1200: 76 Hz, 1920 x 1200: 61 Hz)
Frame synchronous mode: 59 - 61 Hz
Digital: 31 - 76 kHz, 59 - 61 Hz (VGA Text:
69 - 71 Hz)
Analog: 24 - 94 kHz, 49 - 86 Hz (1600 x
1200: 76 Hz, 1920 x 1200: 61 Hz)
Frame synchronous mode: 59 - 61 Hz
Digital: DVI 31 - 68 kHz, 59 - 61 Hz (VGA
Text: 69 - 71 Hz), HDMI 15 - 68 kHz, 49 - 61
Hz (VGA Text: 69 - 71 Hz)
Analog: 31 - 81 kHz, 55 - 76 Hz
Frame synchronous mode: 49 - 61 Hz
Digital: 31 - 68 kHz, 59 - 61 Hz (VGA Text:
69 - 71 Hz)
Analog: 31 - 81 kHz, 55 - 76 Hz
Digital: 31 - 76 kHz, 59 - 61 Hz (VGA Text:
69 - 71 Hz)
Analog: 24 - 80 kHz, 49 - 76 Hz (1600 x
1200: 61 Hz)
Frame synchronous mode: 59 - 61 Hz
Digital: 31 - 64 kHz, 59 - 61 Hz (VGA Text:
69 - 71 Hz)
Analog: 24.8 - 80 kHz, 50 - 75 Hz
Digital: 31 - 64 kHz, 59 - 61 Hz (VGA Text:
69 - 71 Hz)
Analog: 24.8 - 80 kHz, 50 - 75 Hz
Dot Clock
242 MHz
Digital: 162 MHz, Analog: 170 MHz
Digital: 162 MHz, Analog: 202.5 MHz
Digital: 148.5 MHz, Analog: 148.5 MHz
Digital: 148.5 MHz, Analog: 148.5 MHz
Digital: 162 MHz, Analog: 162 MHz
Digital: 108 MHz, Analog: 135 MHz
Digital: 108 MHz, Analog: 135 MHz
Input Terminals
DVI-D x 1, DisplayPort x 1
DVI-I x 2, DisplayPort x 1
DVI-I x 2
DVI-D x 1, HDMI x 1, D-Sub mini 15 pin x 1
DVI-D x 1, DisplayPort x 1, D-Sub mini 15 pin x 1
DVI-I x 1, D-Sub mini 15 pin x 1
DVI-D x 1, D-Sub mini 15 pin x 1
DVI-D x 1, D-Sub mini 15 pin x 1
Sync Formats
-
Separate, Composite
Separate, Composite
Separate
Separate
Separate, Composite
Separate
Separate
USB Ports / Standard
1 upstream, 2 downstream / Rev. 2.0
1 upstream, 2 downstream / Rev. 2.0
1 upstream, 2 downstream / Rev. 2.0
1 upstream for touch panel control / Rev. 2.0
-
1 upstream, 2 downstream / Rev. 2.0
1 upstream / Rev. 2.0
1 upstream / Rev. 2.0
Power Requirements
AC 100 - 120 V, 200 - 240 V: 50 / 60 Hz
AC 100 - 120 V, 200 - 240 V: 50 / 60 Hz
AC 100 - 120 V, 200 - 240 V: 50 / 60 Hz
AC 100 - 120 V, 200 - 240 V: 50 / 60 Hz
AC 100 - 120 V, 200 - 240 V: 50 / 60 Hz
AC 100 - 120 V, 200 - 240 V: 50 / 60 Hz
AC 100 - 120 V, 200 - 240 V: 50 / 60 Hz
AC 100 - 120 V, 200 - 240 V: 50 / 60 Hz
Maximum Power Consumption / Save Mode
82 W / Less than 1 W
95 W / Less than 0.9 W
100 W / Less than 2 W
45 W / Less than 1.3 W
45 W / Less than 1 W
70 W / Less than 2 W
43 W / Less than 0.8 W
33 W / Less than 0.6 W
Power Management
DVI DMPM, DisplayPort 1.1a
Digital: DVI DMPM, DisplayPort 1.1a,
Analog: VESA DPM
Digital: DVI DMPM, Analog: VESA DPM
Digital: DVI DMPM, Analog: VESA DPM
Digital: DVI DMPM, DisplayPort 1.1a,
Analog: VESA DPM
Digital: DVI DMPM, Analog: VESA DPM
Digital: DVI DMPM, Analog: VESA DPM
Digital: DVI DMPM, Analog: VESA DPM
Sensor
Backlight Sensor, Integrated Front Sensor
Backlight Sensor
Backlight Sensor
Backlight Sensor, Ambient Light Sensor
Backlight Sensor, Presence Sensor, Ambient
Light Sensor
Backlight Sensor
Backlight Sensor
Backlight Sensor
OSD Languages
English, German, French, Italian, Japanese,
Simplified Chinese, Spanish, Swedish,
Traditional Chinese
English, German, French, Italian, Japanese,
Simplified Chinese, Spanish, Swedish,
Traditional Chinese
English, German, French, Italian, Japanese,
Simplified Chinese, Spanish, Swedish,
Traditional Chinese
English, German, French, Italian, Japanese,
Simplified Chinese, Spanish, Swedish,
Traditional Chinese
English, German, French, Italian, Japanese,
Simplified Chinese, Spanish, Swedish,
Traditional Chinese
English, German, French, Italian, Japanese,
Spanish, Swedish
English, German, French, Italian, Japanese,
Simplified Chinese, Spanish, Swedish,
Traditional Chinese
English, German, French, Italian, Japanese,
Simplified Chinese, Spanish, Swedish,
Traditional Chinese
Net Weight (With Stand / Without Stand)
11.1 kg / 8.4 kg
10.1 kg / 7.1 kg
10.4 kg / 7.4 kg
7.7 kg / 6.9 kg
7.1 kg / 4.3 kg
9.7 kg / 6.7 kg
7.2 kg / 5.2 kg
5.9 kg / 3.9 kg
Hole Spacing
VESA standard 100 x 100 mm
VESA standard 100 x 100 mm
VESA standard 100 x 100 mm
VESA standard 100 x 100 mm
VESA standard 100 x 100 mm
VESA standard 100 x 100 mm
VESA standard 100 x 100 mm
VESA standard 100 x 100 mm
Certifications and Standards
Please contact the EIZO subsidiary or
distributor in your country for the latest
information.
CE (Medical Device Directive), EN60601-1,
U L 6 0 6 0 1 -1 , C SA C 2 2 .2 N o. 601- 1,
IEC60601-1, VCCI-B, FCC-B, Canadian
ICES-003-B, C-tick, RoHS, China RoHS,
WEEE, CCC, GOST-R
CE (Medical Device Directive), EN60601-1,
UL60601- 1, CS A C22. 2 No. 601- 1,
IEC60601-1, VCCI-B, FCC-B, Canadian
ICES-003-B, C-tick, RoHS, China RoHS,
WEEE, CCC, GOST-R
CE (Medical Device Directive), EN60601-1,
UL60601- 1, CS A C22. 2 No. 601- 1,
IEC60601-1, VCCI-B, FCC-B, Canadian
ICES-003-B, C-tick, RoHS, China RoHS,
WEEE, CCC, GOST-R
J60950, EN60950-1, CE (Low Voltage
Directive, EMC Directive), UL60950-1, CSA
C22.2 No. 60950-1, IEC60950-1, VCCI-B,
FCC-B, Canadian ICES-003-B, C-tick, RoHS,
China RoHS, WEEE, CCC, GOST-R
J60950, ISO9241-307, prEN 50279, EN
60950-1, EK1-ITB2000, CE (Low Voltage
Directive, EMC Directive), UL60950-1, CSA
C22.2 No. 60950-1, IEC60950-1, VCCI-B,
FCC-B, Canadian ICES-003-B, C-tick,
RoHS, China RoHS, WEEE, CCC, GOST-R
CE (Medical Device Directive), EN60601-1,
UL60601-1, CSA C22.2 No. 601-1,
IEC60601-1, VCCI-B, FCC-B, Canadian
ICES-003-B, C-tick, RoHS, China RoHS,
WEEE, CCC, GOST-R
CE (Medical Device Directive), EN60601-1,
UL60601-1, CSA C22.2 No. 601-1,
IEC60601-1, VCCI-B, FCC-B, Canadian
ICES-003-B, C-tick, RoHS, China RoHS,
WEEE, CCC, GOST-R
J60950, ISO13406-2, prEN 50279,
EN60950-1, EK1-ITB2000, CE (Low Voltage
Directive, EMC Directive), UL60950-1, CSA
C22.2 No. 60950-1, IEC60950-1, VCCI-B,
FCC-B, Canadian ICES-003-B, C-tick, RoHS,
China RoHS, WEEE, CCC, GOST-R
FDA 510(k) Clearance
Pending (for General Radiography)
Yes (for General Radiography)
-
-
-
-
-
-
Supplied Accessories
AC power cord, signal cables (DVI-D ~ DVI-D,
DisplayPort ~ DisplayPort), USB cable,
Utility Disk (RadiCS LE, ScreenManager
Pro for Medical, user's manual)
AC power cord, signal cables (DVI-D ~ DVI-D,
DisplayPort ~ DisplayPort), USB cable,
Utility Disk (RadiCS LE, ScreenManager
Pro for Medical, user's manual)
AC power cord, signal cables (DVI-D ~ DVI-D,
DVI-I ~ D-Sub mini 15 pin), USB cable,
Utility Disk (RadiCS LE, ScreenManager
Pro for Medical, user's manual), warranty card
AC power cord, signal cables (DVI-D ~ DVI-D,
D-Sub mini 15 pin ~ D-Sub mini 15 pin), USB
cable, audio cable, touch pen, Utility Disk
(Touch panel driver, user's manual), cleaning
cloth, 4 screws for mount option
AC power cord, signal cables (DVI-D ~
DVI-D, DisplayPort ~ DisplayPort), Utility
Disk (user's manual)
AC power cord, signal cable (DVI-D ~ DVI-D),
USB cable, Utility Disk (RadiCS LE,
ScreenManager Pro for Medical, user's
manual)
AC power cord, signal cable (DVI-D ~ DVI-D),
USB cable, Utility Disk (RadiCS LE,
ScreenManager Pro for Medical, user's
manual)
AC power cord, signal cables (DVI-D ~ DVI-D,
D-Sub mini 15 pin ~ D-Sub mini 15 pin), USB
cable, Utility Disk (RadiCS LE, ScreenManager
Pro for Medical, user's manual), warranty card
Warranty
Five Years
Five Years
Five Years
Three Years
Five Years
Five Years
Five Years
Five Years
35°
10
209
245.5
325.5
208.5
325.5
208.5
194
367
200
216
325.5
208.5
320
Height
Adjustment
100
363
339.8
36
205
389.5
239.5
Pi vot
90°
260.4
Pivot
90°
Tilt 30°
61.5
320
Tilt 30°
59
260.4
38.5
272.2
300
405
378.4
303
334
Height
Adjustment
100
406.5
240.3
Pivot
90°
Tilt 40°
64
326
361
38
301.5
Height
Adjustment
171.3
465
434
453
272.5
Tilt 65°
517.8
355
194
Height
Adjustment
82
411.1
Pivot
90°
Tilt 30°
288.8
332
Tilt 15°
376
293.6
301.5
326
367
Pivot
90°
557
516.6
375.5
56.3
47.5
25
547
511.8
Tilt 40°
85
204.5
Height
Adjustment
129
Pivot
90°
566
520.4
82
456
272.5
56.3
Tilt 40°
85
301.5
360.5
550.5
355
209
Height
Adjustment
566
520.4
82
338
402
2°
35°
. Swivel not supported with MS231WT
72.5
456
272.5
17
Swivel
39
Pi vot
90°
17
Other :
Height
Adjustment
Tilt 30°
646
599
326
367
2°
Dimensions (Unit: mm)
MX270W,
MS230W :
205
11
Cli ni cal R eview M o ni t o rs
All product names are trademarks or registered trademarks of their respective companies.
EIZO, RadiForce, FlexScan, ScreenManager, RadiCS and RadiNET are registered trademarks of
Eizo Nanao Corporation. Specifications are subject to change without notice.
Copyright © 2011 EIZO NANAO CORPORATION. All rights reserved. Printed in Japan, 10, 2011, 4K (111003)
Download PDF

advertising