Single Drum Vibratory Rollers BW211D-3, BW211PD-3

Single Drum Vibratory Rollers BW211D-3, BW211PD-3
Single Drum Vibratory Rollers
B W211D-3, B W211PD-3
EARTHWORKS - High & Low Vibration Frequency Setting
# passes
rolling speed
productivity in cu yd/hr by lift thickness, 100 % efficiency
(mph)
8 inches
12 inches
24 inches
30 inches
2
2.5
1141
1712
3423
4279
3
2.5
761
1141
2282
2853
4
2.5
571
856
1712
2139
5
2.5
456
685
1369
1712
2
2.1
958
1438
2875
3594
3
2.1
639
958
1917
2396
4
2.1
479
719
1438
1797
5
2.1
383
575
1150
1438
Note: Repeat number of passes over the same area is required to achieve specified compaction efficiency/density. Successive passes over same area results in reduced area coverage and productivity.
Rolling speed selected provides impact spacing of a minimum 10 impacts per foot at high vibration frequency setting. Actual compaction efficiency is determined by job conditions.
B W211-3 ser ies
Extremely low dBa levels
at operator’s ears
Vibration isolated operator’s platform
Engine air intake at high level
for increased filter life
Wide opening hood affords easy
access to engine, transmission
and all ser vice points
Two vibration frequencies and amplitudes ensure
maximum compaction performance on a variety
of soil applications
Maintenance-free, bolt-on articulation joint
with increased steering and oscillation
angles for better maneuverability
Rear axle with no-spin differential
for improved traction
■ The lower cost, high quality answer to your 84"compaction needs...
The Bomag BW211D-3 and BW211PD-3
were designed to provide a lower cost, high
quality alternative for today’s contractors.
Built for maximum operator comfort, these
models offer increased platform space, centralized machine controls and indicators and
low operating dBa levels. No grease daily
points, a reverse mounted engine and a twostage hood makes these units servicefriendly for minimal down time. The powerful
diesel engine, heavy duty rear axle with no
spin differential, and standard dual amplitude
provide superior compaction performance on
granular and mixed soils as well as on
cohesive and semi-cohesive soils.
■
Applications:
• Highway construction and maintenance
• Driveways
• Parking lots
• Landfill
Designed specifically for soil compaction.
Featuring…
■
Easy operation through ergonomic layout of controls
Handling is Easier & Safer:
• Vibration-isolated operator’s platform.
• Extremely low noise levels at operator’s
ears, even with vibration.
• Reduced “stop to stop” steering input.
• Increased forward and rearward visibility
to improve job site safety.
• Operator controls are strategically and
comfortably placed for natural
movements.
• Multi-position, adjustable seat provides a more comfortable environment.
• Increased platform space reduces operator fatigue.
• Easy single lever control for both travel
direction, speed and vibration.
• Equipped with a standard back-up
warning system.
Standard dual amplitude enhances machines versatility
Operator selectable traction control
maximizes traction and gradeability
■
Achieve Maximum Productivity:
• Higher productivity leads to increased
profits and better machinery ROI.
• High static linear loads and optimized
amplitudes deliver higher centrifugal forces.
• Higher frame to drum weight ratio ensures
better compaction performance.
• Two vibrating amplitudes and frequencies provide uniform compaction on a
wide variety of soils.
• Drum vibration buffers can be replaced
individually without drum removal.
• Increased steering angle provides better
maneuverability.
• Thick drum shells with chamfered
edges provide better compaction results
and superior surface quality.
• Maintenance-free vibration system and
bearings.
• Wider clearance between frame and
drum in conjunction with dual scrapers
prevents material build-up.
• Heavy duty rear axle with no spin differential delivers superior tractive effort.
• Low emissions, diesel engine and high output drum drive provide improved traction
performance.
Individually changeable rubber buffers with no special tools or
disassembly of the drum required
Maintenance-free, rugged, oscillating-articulation joint
bolted on the outside of the front and rear frames
■
Less Service & Maintenance:
The purchase price is important, but so are
the operating costs. Check these features:
• Easy access to all service and maintenance
points.
• Equipped with corrosion free, plastic
diesel fuel tank.
• No grease daily points reduces routine
maintenance.
• External drain points for engine oil, engine
coolant and hydraulic oil facilitate servicing ease.
• Reverse engine mounting places specific
hydraulic components to rear of the
machine for easy access.
• BOMAG filter system extends hydraulic oil
and filter change intervals to 2000 working
hours or 2 years.
• Drum vibration buffers can be replaced
individually without the use of special
tools.
• Spring-Applied, Hydraulically-Released
(SAHR) brakes are maintenance free.
• Air intake placed high for cleanest air
quality extends filter service intervals.
• Recessed frame bolts reduce bolt head
shearing and repair costs.
Large steel engine hood provides easy access to all service and
maintenance points
With these features and many more, it’s
easy to see why these models maintain a
high residual value while delivering
lower lifetime operating costs.
Technical Specifications
B W211-3 S er ies
H2
H
D
K
S
W
O1
A
Standard Equipment
✓ Hydrostatic drum and vibration
drives
✓ Dual vibrating frequencies and
amplitudes
✓ Hydrostatic articulated steering
✓ No spin differential with SpringApplied, Hydraulically-Released
(SAHR) brakes
✓ Bolt-on oscillating, articulation
joint
✓ Articulation lock
✓ Adjustable operator’s seat
✓ Single lever control for travel
and vibration
✓ Audible/visual warning indicators:
- Engine oil pressure
- Engine temperature
- Electrical charge
✓ Hydraulic oil level gauge
✓ Hour meter
✓ Fuel tank level gauge
✓ Drum scrapers
✓ ROPS / FOPS with seat belt
✓ Back-up alarm
✓ Emergency Stop
Optional Equipment
Working lights front/rear
ROPS cab with heater
Terrameter
Omegameter
Pad foot segment kit
Special paint
Tool kit
Smooth shell segment kit (PDH)
Dimensions in inches (mm)
A
B
BW 211D-3
112.9 88.6
(2868) (2250)
BW 211PD-3
112.9 88.6
(2868) (2250)
D
59.1
(1500)
58.3
(1480)
H
89.3
(2268)
89.3
(2268)
Technical data
Weights
Operating Weight with ROPS/FOPS ............................... lbs
Axle load, drum................................................................ lbs
Axle load, wheels .............................................................. lbs
Static linear load (drum)................................................... pli
Dimensions
Working width ................................................................. in
Track Radius, inner .......................................................... in
Dimensions ......................................................................
Driving Characteristics (depending on site conditions)
Speed (1) .......................................................................... mph
Speed (2) .......................................................................... mph
Speed (3) .......................................................................... mph
Speed (4) .......................................................................... mph
Max. gradeability without/with vibration ......................... %
Drive
Engine manufacturer ........................................................
Type .................................................................................
Cooling ............................................................................
Number of cylinders.........................................................
Performance ISO 9249..................................................... hp
Speed................................................................................ rpm
Performance SAE J 1995.................................................. hp
Speed................................................................................ rpm
Fuel ..................................................................................
Electric Equipment........................................................... V
Drive System ....................................................................
Drum Driven ...................................................................
Drums and Tires
Drum width ..................................................................... in
Drum diameter................................................................. in
Tire size............................................................................
Brakes
Service brake ....................................................................
Parking brake ...................................................................
O2
B
L
H2
116.9
(2970)
116.9
(2970)
K
19.3
(490)
19.3
(490)
L
220.9
(5610)
220.9
(5610)
O1
2.4
(60)
2.4
(60)
BOMAG
BW211D-3
O2
2.4
(60)
2.4
(60)
S
0.98
(25)
0.98
(25)
W
83.9
(2130)
83.9
(2130)
BOMAG
BW211PD-3
(kg)
(kg)
(kg)
(kg/cm)
22928
13668
9259
162.9
(10400)
(6200)
(4200)
(29.1)
25089
15829
9259
(11,380)
(7,180)
(4,200)
(mm)
(mm)
83.9
137.6
see sketch
(2130)
(3494)
83.9
137.6
(2130)
(3494)
(kmph)
(kmph)
(kmph)
(kmph)
0-3.1
0-3.7
0-5.6
0-8.4
47/47
(0-5)
(0-6)
(0-9)
(0-13.5)
0-3.1
0-3.7
0-5.6
0-8.4
47/47
(0-5)
(0-6)
(0-9)
(0-13.5)
(kW)
(kW)
(mm)
(mm)
Steering
Steering system.................................................................
Steering method ...............................................................
Steering angle +/- ............................................................. degrees
Oscillating angle +/- ......................................................... degrees
Vibratory system
Drive system.....................................................................
Frequency......................................................................... vpm (Hz)
Amplitude ........................................................................ in
(mm)
Centrifugal force .............................................................. lbs
(kN)
Capacities
Fuel .................................................................................. gal (l)
Deutz
BF4M2012C
water
4
133
(98)
2300
131
(98)
2300
diesel
12
hydrostatic
standard
Deutz
BF4M2012C
water
4
133
(98)
2300
131
(98)
2300
diesel
12
hydrostatic
standard
83.9
(2130)
61.0
(1550)
23.1/18-26/8PR
83.9
(2130)
60.2
(1530)
23.1/18-26/12PR
hydrostatic
SAHR
hydrostatic
SAHR
oscillating, articulating
hydrostatic
35
12
oscillating, articulating
hydrostatic
35
12
hydrostatic
1800/2160
(30/36)
0.071/0.035 (1.8/0.9)
53100/38250 (236/170)
hydrostatic
1800/2160
(30/36)
0.065/0.032 (1.64/0.82)
61875/44550 (275/198)
66
66
(250)
B38H-1618 3M506JMWW
Shipping dimensions
in cubic feet (m3)
without/with ROPS/FOPS
BW 211D-3
1010.9 (28.6)
1323.9 (37.5)
BW 211PD-3
1010.9 (28.6)
1323.9 (37.5)
(250)
Technical modifications reserved. Machines may be shown with options.
www.bomag-americas.com
BOMAG Americas, Inc.
2000 Kentville Rd. • Kewanee, IL 61443
Tel: 309 853-3571 • Fax: 309 852-0350
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising