s-quad put an end to false alarms - Universal Fire Protection Co. (Pvt

s-quad put an end to false alarms - Universal Fire Protection Co. (Pvt
by Honeywell
S-QUAD
PUT AN END TO FALSE ALARMS
by Honeywell
Fire - never underestimate the danger
With extensively patented technology S-QUAD improves both the
speed and integrity of fire detection whilst reducing false alarms.
This advanced sensing technology is integrated in one device with
certified voice enhanced alarm sounder and EN54-23 visual alarms
making S-Quad a truly unique device.
S-QUAD SYSTEM BROCHURE
Life Safety First
Intelligent smoke, heat and CO gas sensing technology for early detection of fires
l
Voice messaging ensures quicker and safer evacuation in the event of a fire
l
Fully complies with the EN54-23 standard for Visual Alarm Devices (VADs)
l
Put an end to False Alarms
Combined power of S-Quad and the Vigilon panel provides quick, intelligent decisions
minimising false alarms
l
The patented dual angle optical chamber within the S-Quad sensor clearly
distinguishes between smoke, steam and dust particles
l
Programmable sensor ‘states’ for different times during the day and night improves
response to real fires and reduces instances of false alarms
l
Combined CO gas, smoke and heat sensing further minimises false alarms
l
Save Time and Money
Four functionalities all in ONE sensor
l
Supported on the same two wires (loop) within the Vigilon system thereby reducing
installation cost
l
Increased loop alarm load capable of powering 200 sensor-sounders or 100
sensor-sounder VADs
l
Fast and simple to install
l
‘SAFE’ (Soft Addressed Firmware Encoded) addressing and ‘soft’ addressing does not
require manual setting of switches in either the head or base
l
Setting New Industry Standards
Cutting edge technology building on the reliable analogue addressable Vigilon platform
l
EN54-23 VADs conforms to the Equality Act 2010 with configurable intensity settings
l
Aesthetically pleasing and suitable for any type of environment
l
by Honeywell
S-Quad System Benefits
A combined Multi-sensor, Speech, Sounder and visual alarm in one intelligent, discreet
device providing a safe and cost effective solution for most applications.
The S-Quad sensors inherit all the advantages of Vigilon’s powered loop combined
with extra features, making Vigilon and S-Quad an industry leading combination for fire
detection and alarm signalling.
Optical Scatter
Life Safety First
Sensor options detect combinations of smoke, heat and
carbon monoxide
l
Intelligent gas sensing technology monitors the
concentration of carbon monoxide in the environment for
early detection of a potential fire hazard
l
The stored voice messages within the sensor allow
specific instructions to be conveyed to ensure a safe,
controlled evacuation
l
Put an End to False Alarms
The combined power of the sensor and the Vigilon panel
provides quick and intelligent decision making. S-Quad
incorporates four separate sensing elements – heat,
carbon monoxide, optical (forward and backward) scatter
l
Patented, dual angle optical forward and backward
scatter allows the system to distinguish between smoke,
steam and dust
l
Day and night timed sensor ‘states’ can be programmed
to improve the response to real fires and reduce the
number of false alarms. Any of the sensing can be set at
different sensitivity levels, depending on the application
l
An infra red beam is deflected by the particles in
the chamber and results in rays scattered in many
directions. The ratio of forward and backward scatter
indicates the type of particles present
l
Carbon Monoxide Sensor
This sensor is effective at detecting smouldering fires.
This technology allows S-Quad to be immune to false
alarms caused by dust, steam and insects
l
Save Time and Money
Comprehensive range of analogue addressable fire
sensors all within ONE device
l
Supported and powered on the Vigilon Loop – only one
set of terminations and one cable required for multisensor, sounder, speech and visual alarm functionality
l
Increased loop alarm load capable of powering 200
sensor-sounders or 100 sensor-sounder VADs
l
Built-in short circuit isolators in every device
l
Monitored input facility – fire, fault, non-fire – reduces
the installed cost of the system and reduces the need for
separate interfaces
l
Monitored repeat LED output
l
Loop powered installation incorporating S-Quad requires
no additional interfaces or extra monitored sounder
circuits
l
Backward Scatter
Forward Scatter
S-Quad’s intelligent design ensures quick and simple
installation with more wiring space within the base
l
S-QUAD SYSTEM BROCHURE
Setting New Industry Standards
Our high intensity EN54-23 Compliant Visual Alarm
Device (VAD) conforms to the Equality Act 2010
requirement of providing visual alarms in high noise
areas and for those with hearing difficulties
l
Low profile sensor range with semi-flush mounting
option for enhanced, discreet appearance
l
S-Quad features
Flexible sensitivity throughout the day
Base label
IP21
gasket
(optional)
Base
O2HCO Performance Examples
Steam
Forward Scatter
• High Signal
= Alarm
PCB cover
Backwards Scatter
• Low Signal
= No Alarm
Heat & CO
• No Signal
= No Alarm
Result
No Alarm
PCB
Optical chamber
and sounder horn
assembly
Baffle ring
Black – sensor only
Why a Dual Optical Heat Co Multisensor?
Combining the CO technology into the O2H sensor gives this
multisensor the benefits of both high false alarm rejection and
fast detection of a wide range of fire types.
Many combinations of the different sensors are used in the
multisensor to enable fast and above all, reliable fire detection.
The following two cases are an example of this.
CASE 1: SMOULDERING FIRES With smouldering fires,
either the CO levels will be sufficient to detect a fire early, or the
presence of CO with smoke will enhance the sensitivity of the
dual optical and hence the speed of detection. Note that this
process is very immune to common false alarm signals, due to
the discrimination of the CO cell used in combination with the
dual optical sensor.
CASE 2: FLAMING FIRES With flaming fires the dual optical
sensor becomes more sensitive. Furthermore if a rise in
temperature is detected by the heat sensor, a further increase
in optical sensitivity occurs, enabling fast and reliable detection
of flaming fires.
Once again this process has good immunity to false alarms, due
to the discrimination of the heat sensor used in combination with
the dual optical sensor.
White – with speech
and/or sounder
Insect mesh
assembly
Sensor
markings
Outer
housing
Visual alarm
Light pipes
Lens Cap
(Optic)
Dust cover
for head
r
by Honeywell
S-Quad 4 Functions in ONE Sensor
SENSOR – A truly intelligent analogue sensor incorporating exceptional computing power
in the sensor as well as the panel to achieve an extremely fast response to a real fire
whilst minimising the risk of false alarms.
The patented dual angle optical scatter
technology allows identification of the particle
source filtering potential false alarms due to
steam and dust
l
Effectiveness in reducing False Alarms
Time comparison
analogue sensors
tested with…
The gas sensing element within the chamber
monitors the build up of Carbon Monoxide in
Sounder
Speechearly detection
Strobe
smouldering fires allowing
where
standard smoke detectors would not operate
Combined CO gas sensing with dual angle
optical and heat allows a higher level of false
alarm immunity whilst still improving the
detection speed of certain types of fire
l
Each sensor element has sensitivity settings
which can be adjusted to suit the environment /
application and can be programmed for different
time periods during the day or night
l
Optional intermittent flash to confirm operation
and output for remote indicator as standard on
each sensor
l
I
O
CO
OH
O2H
O2HCO
Dust
Aerosol
l
Sensor
Detector types and multi-sensor options
H
Steam
Insects
Cigarette smoke
Cooking fumes
Other Gas leakages
Probable
Alarm
Possible
Alarm
Unlikely
Alarm
Effectiveness of Sensors to Detect Test Fires
Analogue sensors
during standard
test fires
Detector types and multi-sensor options
H
I
O
CO
OH
O 2H
O2HCO
TF1 Open wood fire
TF2 Smouldering wood fire
TF3 Smouldering cotton fire
TF4 Open plastics (PU) fire
TF5 Liquid fire (n-heptane)
TF6 Liquid fire (spirit)
No response
Poor response
Acceptable
response
Good response
SPEECH – Sensor sounder functionality capable of delivering synchronised messages
throughout the building
Voice messages stored on a memory chip in the sensor can be triggered to give clearly understood
messages leading to quicker and safer evacuation in an emergency
l
Up to four different messages stored in each device allow different messages to be played in each
area
for phased evacuation
Strobe
l
Speech
Custom message option to cater for the specific needs of a building
l
Up to 20 seconds of message can be stored in place of standard messages
l
Voice messages are synchronised across loops to ensure clear instructions throughout the building
l
Complex sounds such as a bell tone can be reproduced to deliver alternative sound signals
l
Sound levels can be set for each device and a special turbo mode is available boosting sounder
level in difficult areas
l
RESEARCH* SHOWS ONLY 13% OF PEOPLE REACT TO BELLS, WHILST 70% REACT TO A VOICE MESSAGE.
*Sources: Brian Piggott (The Fire Research Station) and David Canter (Surrey University)
S-QUAD SYSTEM BROCHURE
SOUNDER – Combined sensor sounder technology provides a cost effective solution
for alarm signalling saving on installation costs as there is no need for additional power
supplies. Synchronised messages are transmitted through the same sensor that detects
the fire.
The sensor sounder device allows an even distribution of sound with only one device to install
l
Sounder tones can be programmed to avoid confusion with other alarm tones in a building
l
Low current consumption allows up to 200 sensor sounder devices per loop
l
Sound patterns are synchronised across the loop to avoid risk of confusion where two or more
sounders are heard
Speech
Strobe
l Sound levels are adjustable for each device and the soft start option
avoids the unnecessary creation of panic in an emergency
l
Sounder
Patented design delivers 85dBA @ 1m
l
Rich harmonic sound output using patented techniques
l
Volume control allows optimum sound pressure levels
l
Turbo option delivers enhanced sound pressure (88dBA @1m)
l
STROBE – The S-Quad Multi-sensor is a fully
integrated Visual Alarm Device (VAD). The only
practical solution meeting the demands of
detection and the performance needed to meet
the EN54-23 standard
Strobe
Sensor and alarm in one device reduces installation
time and cost. Built-in high intensity flashing strobe
helps alert occupants in noisy environments as well
the hard of hearing
l
Meets all the requirements of the Equality Act 2010
l
Compatible with the S-Cubed wall mounted VAD
l
State of the art LED visual alarm technology
l
Advanced power management that ensures the loop
will always operate even in a fault condition
l
Range of devices and power settings to suit widest range of building applications
l
Light output that allows devices to be sited at standard smoke and heat detector spacings
l
Synchronised flash rate across the whole control panel avoiding risk of induced seizures
l
Strobe can operate independently of the sounder if required
l
by Honeywell
S-Quad Technical
Specification
SYSTEM COMPATIBILITY
Uniquely in the UK’s fire detection and alarm industry,
Gent by Honeywell continues to offer backward
compatibility assurance on its third generation of Vigilon’s
range of sensors through the appropriate system upgrade.
PART NUMBERS AND
LOOP LOADING
PART NUMBER
DESCRIPTION
SYMBOL
MAX QUANTITY
PER LOOP
S4-700
S4BK-700
Sensor base (White)
Sensor base (Black)
–
N/A
S4-701
S4-705
S4BK-705
IP 21 Sensor Base for S-Quad
IP 21 Sensor Base for S-Quad (White pack of 5)
IP 21 Sensor Base for S-Quad (Black pack of 5)
–
N/A
S4-720
Heat Sensor
H
200
S4-780-S
Heat Sensor Sounder
HS
200
S4-715
Optical Sensor
O
200
S4-710
Optical Heat Sensor
OH
200
S4-770-S
Optical Heat Sensor Sounder
OHS
200
2
S4-711
S4BK-711
Dual Angle Optical Heat Sensor (White)
Dual Angle Optical Heat Sensor (Black)
OH
200
S4-771-S
Dual Angle Optical Heat Sensor Sounder
O HS
2
200
2
200
2
200
S4-711-V
S4BK-711-V
Dual Angle Optical Heat Sensor + Speech (White)
Dual Angle Optical Heat Sensor + Speech (Black)
O HSp
S4-901
Dual Angle Optical Heat & CO Sensor + Speech + Strobe
O HCO
Loop Capacities are strictly for guide purposes only
STANDARD PERFORMANCE WHITE AND RED
S4-711-V-VAD-LPR
O2H Sensor – White VAD
S4-711-V-VAD-LPW
O2H Voice Sensor Sounder – White VAD
C-3-10
HIGH PERFORMANCE WHITE VISUAL ALARMS
S4-711-VAD-HPW
O2H Sensor – White VAD
S4-711-V-VAD-HPW
O2H Voice Sensor Sounder – White VAD
S4-720-V-VAD-HPW
Heat Voice Sensor Sounder – White VAD
S4-911-V-VAD-HPW
O2HCO Voice Sensor Sounder – White VAD
High
intensity
C-6-16
Medium
intensity
C-3-14
(Open
Category
C-5-14)
Low
intensity
C-3-10.8
(Open
category
C-4-10.8)
High
intensity
C-3-14
Also Open
Class
C-4.5-14
Medium
intensity
C-3-13
Also Open
Class C-413
Low
intensity
C-3-10
HIGH PERFORMANCE RED VISUAL ALARMS
S4-711-VAD-HPR
O2H Sensor – Red VAD
S4-711-V-VAD-HPR
S4BK-711-V-VAD-HPR
O H Voice Sensor Sounder - Red VAD (White)
O2H Voice Sensor Sounder - Red VAD (Black)
S4-720-V-VAD-HPR
Heat Voice Sensor Sounder - Red VAD
S4-911-V-VAD-HPR
O2HCO Voice Sensor Sounder – Red VAD
2
NB: Up to 100 sensor-sounder VADs can be installed on each Vigilon loop depending on the intensity setting.
Refer to our design tools for verify individual designs.
S-QUAD SYSTEM BROCHURE
SPECIFICATION
DESCRIPTION
DETAILS
Weight
110g (170g with base)
Dimensions
Diameter=117mm: height=49.6mm (height
increases to 63.8mm with base)
Insert IP rating for VADs
Ingress Protection with standard base: IP30
S4-701:IP21 with gasket
805573:IP43 with gasket
Enclosure Materials
ABS
Colour
RAL 9010
Sorage temperature
-20ºC to 70ºC (CO is -20ºC to 50ºC)
Ambient operating temperature
-10ºC to 50ºC
Relative Humidity
95% non condensing (25ºC to 45ºC)
Sounder Frequency
Low 730Hz - High 970Hz
LPCB Approved
VOICE MESSAGES
Heat
EN54 : pt 5
Optical Smoke all variants
EN54: pt 7
Optical Heat with CO
EN54 : pt 5 & 7
Short circuit isolators and I/O interfaces
EN54-17 & 18
Sounder
EN54 : pt 3
Speech Sounder
EN54 : pt 3
Visual Alarm
EN54 : pt 23
The speech function is provided by stored messages on a non-volatile flash memory
component. This audible output from the flash memory can hold up to 20 seconds of
speech. There is also the capability to provide complex tones, such as bell and DIN
tones. Each sensor includes four standard messages with the component, which are as
follows:
Alert Message: (Female Voice)
“An incident has been reported in the building, please await
further instructions”
l
Alarm Message 1: (Female Voice)
“Attention please, this is an emergency please leave the building
by the nearest available exit”
l
Alarm Message 2: (Male Voice)
“This is a Fire Alarm! Please leave the building immediately
by the nearest available exit”
l
Test Message: (Female Voice)
“This is a test message, no action is required”
l
by Honeywell
10 Reasons to specify S-Quad
1
1
4
2
7
5
10
1
8
4
7
4
2
7
5
3
10
1
8
6
4
2
9
7
5
10
8
2
3
5
3
8
6
6
2
9
3
5
3
8
6
6
LPCB Approved
The S-Quad sensors are EN54 compliant and LPCB
approved to meet all requirements of the Construction
Products Directive.
Advanced Sensing Technology
Coupled with integral sounder, speech capability and visual alarm in one
intelligent device provides the UK’s most innovative solution to the
detection and signaling of fires.
9
Rapid Fire Detection
Four separate sensing elements including CO can be set with individual sensitivity levels
and sensor ‘states’ can be programmed for different time periods to suit all applications and
environments.
Minimal False Alarms
The combined power of S-Quad and Vigilon panel provides quick, intelligible decision
making. The S-Quad dual angle optical sensor recognises a clear distinction between smoke
and steam.
9
Saves Lives
The S-Quad range incorporates intelligent heat and gas sensing technology to allow the
early detection of fires, which are known to be particularly hazardous to building occupants.
9
S-QUAD SYSTEM BROCHURE
10
8
9
7
10
3
Safe Evacuation
Voice messaging capability through the sounder functionality ensures quick and safe
evacuation in the event of a fire.
5
3
6
8
6
2
9
5
9
Cost Savings
S-Quad provides four functionalities within one device supported by 2-wire loop Vigilon
system, with built-in isolators in every device.
3
Compliance with the Equality Act 2010
Built-in high intensity EN54-23 VAD warns those with hearing difficulties of a potential fire
hazard – now a legal requirement in all public buildings.
6
Monitored Line Input / Output Option
Output can be used for a remote LED. Input can have a separate identity to the sensor
although they share the same electronic address.
8
9
Peace of Mind
All Gent fire products are designed to be compatible with the same successful Vigilon
platform and supported by a UK wide network of Approved System Integrators.
RK
7
5
6
4
2
9
7
5
3
1
10
8
6
4
2
WO
5
1
8
4
2
3
1
ET
2
APP
ROVE
D
N
by Honeywell
Gent by Honeywell is synonymous with quality and innovation in the fire detection
and alarm industry. Gent technology meets rigorous British and European standards
for all projects ranging from small installations to complex, multi-site networks.
GENT BY HONEYWELL IN THE UK
Gent works in partnership with the Gent 24 Network of Approved System
Integrators who supply Gent equipment and carry out design, installation,
RK
commissioning and maintenance operations to the highest standards of
ET
WO
workmanship.
APP
ROVE
D
N
GENT BY HONEYWELL INTERNATIONAL
Across the world, Gent works in partnership with approved distributors who
supply Gent equipment and carry out design, installation, commissioning,
and maintenance operations to the highest standards of workmanship.
App Store Badge
DownloadBasics
the new S-Quad App
Available on the
Available on the
App Store Badge
DownloadBasics
the new Gent VAD Tool
The App Store badge must be used in both
Minimum clear space and minimum sizeThe App Store badge must be used in both
on the clear space is equal to one-quarter
marketing and advertising communications, such Available
as
• Minimum
the and advertising communications, such as
marketing
TV spots, print ads, video trailers, email, newsletters,
height of the badge.
TV spots, print ads, video trailers, email, newsletters,
and websites, whenever you promote your app
• Do not place photos, typography, or other
graphic
and
websites, whenever you promote your app
offered on the App Store. Only the badge shown here
elements inside the minimum clear space.
offered on the App Store. Only the badge shown here
is approved by Apple.
• Minimum size is 10 mm for use in printedis materials
approved by Apple.
and 40 pixels for use onscreen.
For online communications, you must provide a
For
• Always select a size that is clearly legible butonline
not communications, you must provide a
link to your app on the App Store wherever the
link to your app on the App Store wherever the
dominant.
App Store badge is used. To obtain the URL for your
App Store badge is used. To obtain the URL for your
X
X
app on the App Store, go to your product page in
app on the App Store, go to your product page in
Available on the
X
Available on the
iTunes. Right-click or Control-click your app listing
iTunes. Right-click or Control-click your app listing
40 px
and choose Copy URL. Embed the URL in the App
and choose Copy URL. Embed the URL in the App
X
X
Store badge or your marketing copy.
Store badge or your marketing copy.
Customers will be directed to install iTunes software
if needed, then routed to their original destination
on the App Store.
Localized badges
Apple provides badge artwork with the “Available
42
on the” modifier translated into 11 languages (listed
below). Do not create your own version of a localized
badge. Always use artwork provided by Apple.
Customers will be directed to install iTunes software
Backgrounds
if needed, then routed to their original destination
X
X Store badge always
The Available
on the App
on the App Store.
12 px X App Store
appears in black and white as shown here. The white
X
X
border surrounding the badge is part of the
badge badges
Localized
artwork and must be included. The App Store
badge
Apple
provides badge artwork with the “Available
can be placed on:
on the” modifier translated into 11 languages (listed
Minimum clear space and minim
• Minimum clear space is equal to
height of the badge.
• Do not place photos, typograph
elements inside the minimum c
• Minimum size is 10 mm for use
and 40 pixels for use onscreen.
• Always select a size that is clear
dominant.
40 px
X
X
X
X
Available on the
X
Backgrounds
X
X Store b
The Available
on the App
12 px X App Store
appears in black and white as sho
X
X
border surrounding the badge is
artwork and must be included. Th
can be placed on:
below). Do not create your own version of a localized
• A black or white background
• A black or white background
badge. Always use artwork providedLby
i t eApple.
r a t u r e r e f: G
N 0 26 background
• A solid-color background
• AE solid-color
• A background image as long as legibility is not
• A background image as long as
diminished
diminished
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising