For Every PDS Solution PRODUCT CATALOG
PRODUCT CATALOG
For Every PDS Solution
SPRING 2013
INTRODUCTION
HOLOCOM – THE SINGLE SOURCE FOR ALL PDS SOLUTIONS
Holocom, well-known for its industry standard hardened carrier protective distribution system (PDS), has expanded
its offering to meet the increasing diversification of PDS requirements for DoD and other agencies needing to
secure their network infrastructure against physical intrusion. Holocom is now the only manufacturer to offer all four
PDS solutions approved for SIPRNet and other classified networks:
•
Hardened Carrier - de facto standard Holocom PDS
•
Hardened Carrier plus alarm for fiber & copper networks
•
Alarm plus interlocking armored fiber cable
•
Retrofit alarm to bring non-compliant PDS into compliance
With its expanded product offering, Holocom is continuing its tradition of offering customers PDS
solutions that reduce life cycle costs.
Holocom designed and engineered its hardened carrier PDS to specifically improve
upon the limitations of the original hardened carrier – raw steel pipe (EMT).
Holocom enables moves, adds, and changes (MACs) to an existing
network, lower installation labor costs, a true technical inspection
of the network post installation, and drastically improves the
appearance of the hardened carrier – all while complying with the strict security requirements of
NSTISSI 7003.
Holocom offers the lowest cost and widest range
of Alarm Carrier PDS options in the industry.
Working with Fiber SenSys®, the leader in fiberoptic sensor technology, Holocom
SECURE LARGE CARRIER™ (SLC)
provides the best of alarm PDS
technology including advanced
tuning and calibration software that
learns your environment for the T H R O U G H - WA L L K I T S
elimination of nuisance alarms.
Holocom tailors its services to meet
project requirements and always
offers free system design for govern- S E C U R E M I N I D U K T ™ ( S M D )
ment customers. This ensures and
accurate bill of materials (BOM) and
USER DROP BOXES
labor estimate to support budgeting.
Holocom also provides installation/design/project
management training and certification, and has
installation partners worldwide.
Contact Customer Service for FREE System Design
with Bill of Materials and Labor Estimate
HC508 is one of three Alarm Carrier options.
1-888-465-6266 or customerservice@holocom.com
EQUIPMENT ENCLOSURES
CONNECTORS
S E C U R E R A C E WAY ( S D S )
Use the following technical guides for reference:
•
National Security Agency (NSA) - NSTISSI
No. 7003, 13 December 1996
•
U.S. Army Information Systems
Engineering Command (ISEC) - SIPRNET
Technical Implementation Criteria,
Version 6, October 2010
•
Air Force Systems Security Instruction
AFSSI 7003, August 2008, ESIM 2009-01
AFMAN 33-201
•
U.S Navy and U.S. Marine Corps IA
Publication 5239-22, October 2003
H O L O C O M
P R O D U C T
L I S T I N G
E NCLOS UR ES
P D S
P R O D U C T
L I S T I N G
S E CU RE DI S T RI BU T I O N S YS T E M ( S DS ) C O N T I N U E D
SEC-WM-UDB-H1
User Drop Box
2
SDS-CT-90e90° External Connector13
SEC-WM-UDB2-H1
User Drop Box (UDB2)
2
SDS-CT-3IN
SEC-WM-UDB3-H1
User Drop Box (UDB3)
2
SDS-CT-3WYThree-Way Connector13
SEC-WM-764-H1
764 High Security Enclosure
3
SDS-CT-OFF-04
Offset Connector 4 Inch
14
SEC-WM-885-H1
High Security Enclosure
3
SDS-CT-OFF-08
Offset Connector 8 Inch
14
SEC-WM-04U-H1
Secure Wall Mount Enclosure - 4U Depth
3
SDS-CT-COL-01
Column Connector 4 Inch
14
SEC-WM-PB1-H1
High Security Pull Box
4
SDS-CT-COL-02
Column Connector 8 Inch
15
SEC-WM-PB2-H1
High Security Pull Box
4
SDS-CT-45i45° Internal Connector15
SEC-WM-PB3-H1
High Security Pull Box
4
SDS-CT-45e45° External Connector15
SEC-WM-PB5-H1
High Security Pull Box
5
SEC-WM-PB9-H1
High Security Pull Box
5
T H RO U G H - W ALL K I T S
SEC-WM-764-H5
High Security Enclosure
5
SDS-TW-001-12/24
#1 Through-Wall Kit
16
SEC-WM-885-H5
High Security Enclosure
6
SDS-TW-002-12/24
#2 Through-Wall Kit
16
SEC-WM-PB1-H5
High Security Pull Box
6
SDS-TW-004-12/24
#4 Through-Wall Kit
17
SEC-WM-PB2-H5
High Security Pull Box
6
SDS-TW-005-12/24
#5 Through-Wall Kit
17
SEC-WM-PB3-H5
High Security Pull Box
7
SEC-WM-PB4-H5
High Security Pull Box
7
AT TACH M E N T K I T S
SEC-WM-118-H5
High Security Pull Box
7
SDS-RW-AKT-03
Raceway Attachment Kit18
SAP-IM-SE1-H1
IPS Junction Box
8
SDS-HW-GYP-02
Gypsum Hardware Kit
18
SEC-WM-EXT1-H1
Exterior Building Communications Enclosure
8
SDS-HW-CON-02
Concrete Hardware Kit
18
SDS-IN-RTF Retrofit Insert - Back Plate
19
SDS-IN-RTF-02
Retrofit Insert - Back Plate (RTF2)
19
S E CUR E D ISTRIBU TIO N SYSTEM (SDS)
Internal Three-Way Connector
13
ACCE S S O RI E S
2 " x 2" S E C URE RACEWAY
SDS-WM-RCW-ST
Secure Raceway – Steel
9
SLD-RTF-764
Retrofit Slam Lock Door 19
SDS-WM-RCW-ST-05
Secure Raceway – Steel 50 Feet
9
SDS-RW-CMB
Cable Management Bracket
20
SDS-WM-RCW-AL
Secure Raceway – Aluminum
9
SDS-LK-SGL
Sargent And Greenleaf® Lock
20
SDS-LK-KIT-ST
Steel Locking Kit
10
SDS-RW-PNT
Secure Raceway Touch-Up Paint
20
SDS-CT-EE6-ST
End-To-End Connector10
SDS-TL-HHP
Secure Raceway Punch Tool
21
SDS-GN-EXYEpoxy Gun21
Secure Raceway 3M™ Epoxy
21
CONNECTORS
SDS-332781
SDS-CT-UNIUniversal Connector11
SDS-332784Epoxy Nozzle21
SDS-WM-REC
11
SDS-RW-SRJ
Secure Raceway Joint
22
SDS-CT-INF-ST
Interface Sleeve11
SDS-RW-BRG
Secure Raceway Joint Kit
22
SDS-CT-INF-90
SDS-RW-SPR-WT
Secure Raceway Spacers White
22
SDS-CT-09090° Connector12
SDS-RW-SPR-WT6
6” Secure Raceway Spacer White 
22
SDS-CT-90i90° Internal Connector12
SDS-1003572
4.5” Trim Ring
23
858.222.6430
888.465.6266
Run End Connector
90° Interface Sleeve
12
www.holocom.com
customerservice@hol ocom.com
H O L O C O M
P D S
P R O D U C T
L I S T I N G
S E CU RE LARG E CARRI E R™
S E CUR E D IS T R IBUTIO N SYSTEM (SDS) C O N T I N U E D
4.5” Round Trim Ring
23
SLC-RCW-ST-20
Raceway & TopCap Kit
32
SDS-1004526
3.25” Trim Ring
23
SLC-WM-MB
Mounting Bracket
32
SDS-20027972” Trim Ring24
SLC-RW-SRJSecure Raceway Joint32
SDS-1002797
SLC-LK-KIT Lock Kit
SLC-CT-EE6
End-to-End Connector
SLC-WM-PBO-H1
Pull Box 0 Interface Sleeve Reducing Washer
24
S E CUR E MINI DUKT™
33
33
33
26
SLC-CT-90i90º Internal Connector34
26
SLC-CT-90e90º External Connector34
SMD-MB-3WY
Mounting Bracket Three-way Connector
26
SLC-CT-REC-LT
Run End Connector Left
34
SMD-CT-3WY
Reducing Three-way Connector
27
SLC-CT-REC-RT
Run End Connector Right
34
27
SLC-TWK-REC-LT
Through-Wall Run End Connector Left
35
27
SLC-TWK-REC-RT
Through-Wall Run End Connector Right
35
SMD-CT-INFInterface Sleeve27
SLC-TWK-TP
Through-Wall Trim Plate Kit
35
SMD-CT-INF-90
SLC-SMD-DP
SMD Drop Connector
35
SMD-CT-09090° Connector28
SLC-RTF-INF-LT
Retrofit Interface Sleeve Left
36
SMD-CT-90C90° Corner Connector28
SLC-RTF-INF-RT
Retrofit Interface Sleeve Right
36
Tube
SMD-WM-MB
Mounting Bracket
SMD-3WY-REC-RT
SMD-3WY-REC-LT
Three-way Run End Connector Right
Three-way Run End Connector Left
90° Interface Sleeve
28
SMD-TW-006-12/24
#6 Through-Wall Kit
29
SMD-TW-007-12/24
#7 Through-Wall Kit
29
SMD-GYP-AKT
Gypsum Attachment Kit29
SMD-CON-AKT
Concrete Attachment Kit30
Rev. 05.02.13
NOTES:
www.holocom.com
customerservice@holocom.com
858.222.6430
888.465.6266
L I S T I N G
SMD-WM-T50
P R O D U C T
SDS-1004527
2
U S E R D R O P B O X ( U D B )
E N C L O S U R E S
PRODUCT CODE
SEC-WM-UDB-H1
6.0
The High Security User Drop Box (UDB) provides physical security
for single or multiple network connections. The UDB mounts
securely on walls and restricts access to the cable termination
point. Built-in back plate1 and cable manager, manufactured
mounting points, and INF-ready top opening reduce installation
time. The door locks securely using Holocom’s patented locking
system and a Sargent & Greenleaf ® padlock (Page 20).
7.5
ENCLOSURE • Height 7.5" x Width 6" x Depth 4"
• 16-gauge electro-galvanized steel
• Weight 4.0 lbs
• 2 3/8" diameter opening - ready for INF and raceway attachment
• Two labor-saving, manufactured mounting points
• Powder Coat Finish: White Textured
DOOR ASSEMBLY
• Single drop-down door with security padlock hasp
• Tamper resistant design with welded internal spring hinge
4.0
BACK PLATE • Integrated tension relief cable management wrap
• Removable
1
Compatible with most US single-gang faceplates. Angled connectors recommended.
U S E R D RO P B OX ( U D B 2 )
PRODUCT CODE
SEC-WM-UDB2-H1
6.0
The 16-gauge High Security User Drop Box 2 (UDB2) provides
physical security for single or multiple network connections. The
UDB2 mounts securely on walls and restricts access to the cable
termination point. The UDB2 is manufactured without a top opening
enabling installers the choice of mounting orientation. Built-in back
plate¹, cable manager, and manufactured mounting points reduce
installation time. Door locks securely using Holocom’s patented
locking system and Sargent & Greenleaf ® padlock (Page 20).
7.5
ENCLOSURE • Height 7.5" x Width 6" x Depth 4"
• 16-gauge electro-galvanized steel
• Weight 4.0 lbs
• Two labor-saving, manufactured mounting points
• Powder Coat Finish: White Textured
DOOR ASSEMBLY • Single drop-down door with security padlock hasp
• Tamper resistant design with welded internal spring hinge
BACK PLATE • Integrated tension relief cable management wrap
• Removable
ACCESSORIES •Sargent & Greenleaf ® padlock (supplied separately)
4.0
1
Compatible with most US single-gang faceplates. Angled connectors recommended.
U S E R D RO P B OX ( U D B 3 )
6.0
PRODUCT CODE
SEC-WM-UDB3-H1
The User Drop Box 3 (UDB3) provides physical security for single or
multiple network connections and was designed specifically to use with
Holocom Secure Mini Dukt™. The UDB3 mounts securely on walls and
restricts access to the cable termination point. The top opening perfectly
positions Secure Mini Dukt™ for a one-inch standoff using Secure
Raceway Spacers (SDS-RW-SPR-WT and in kits SDS-RW-AKT-02/03).
Built-in back plate¹, cable manager, and manufactured mounting points
provide installation efficiency. Door locks securely using Holocom’s
patented locking system and Sargent & Greenleaf ® padlock (Page 20).
7.5
ENCLOSURE • Height 7.5" x Width 6" x Depth 4"
• 16-gauge electro-galvanized steel
• Weight 4.0 lbs
• 1" NPT opening for Secure Mini Dukt™ installation
• Two labor-saving, manufactured mounting points
• Powder Coat Finish: White Textured
DOOR ASSEMBLY • Single drop-down door with security padlock hasp
• Tamper resistant design with welded internal spring hinge
BACK PLATE • Integrated tension relief cable management wrap
• Removable
ACCESSORIES • Sargent & Greenleaf ® padlock (supplied separately)
858.222.6430
888.465.6266
4.0
1
Compatible with most US single-gang faceplates. Angled connectors recommended.
www.holocom.com
customerservice@hol ocom.com
3
HIGH SECURITY ENCLOSURE
PRODUCT CODE
SEC-WM-764-H1
6.0
7.5
• Height 7.5" x Width 6" x Depth 4"
• 16-gauge electro-galvanized steel
• Weight: 4 lbs
• Single door with security padlock hasp
• Tamper-resistant design with welded internal hinges
• Fits with Retrofit Insert—Back Plate (SDS-IN-RTF)
• Powder Coat Finish: White Textured
4.0
1
See SLD-RTF-764 in Accessories (Page19) for alternate door choice.
HIGH SECURITY ENCLOSURE
8.0
PRODUCT CODE
SEC-WM-885-H1
This 16-gauge High Security Enclosure can be mounted on
walls or desktops and provides physical security for surface
mount boxes or any other connection point. The Retrofit
Insert–Back Plate 2 (RTF2) was designed specifically to fit
inside the 885-H1 Enclosure (Page 19). The 885 Enclosure also
may be used as a small pull box within the Holocom PDS. The
door securely locks using Holocom’s patented locking system
and the Sargent and Greenleaf® padlock (Page 20).
8.0
• Height 8” x Width 8” x Depth 5”
• 16-gauge electro-galvanized steel with welded seams
• Weight: 6 lbs
• Single door with security padlock hasp
• Tamper resistant design with welded internal hinges
• Fits with Retrofit Insert-Back Plate 2 (Page 19)
• Powder Coat Finish: White Textured
5.0
SECURE WALL MOUNT ENCLOSURE - 4U DEPTH
29.0
PRODUCT CODE
SEC-WM-04U-H1
The lockable “04U” enclosure mounts on a wall and serves
as a mini-telecommunications room. It includes two (2)
patch panel brackets and one (1) equipment bracket that can
accommodate up to 4U of active electronics. The 04U can be
used for termination and distribution/routing of high-security
communications systems in a classified environment and is an
excellent substitute for traditional 19" racks. It is designed to
house telecom equipment and prevent unauthorized access.
42.0
9.5
www.holocom.com
customerservice@holocom.com
• Height 42" x Width 29" x Depth 9.5"
• 16-gauge electro-galvanized steel with welded seams
• Weight: 94 lbs
• Single door with 3-point locking system and padlock hasp for
Sargent & Greenleaf® padlock (Page 19)
• Tamper–resistant design with welded internal hinges
• Two (2) – 4U patch panel brackets
• One (1) – 4U equipment bracket
• Protected venting louvers
• Powder Coat Finish: White Textured
• Fan kit accessory sold separately (AGW-FANKITR)
858.222.6430
888.465.6266
E N C L O S U R E S
The High Security 764 Enclosure can be mounted on walls or
desktops and provides physical security for surface mount
boxes or any other connection point. The 764 Enclosure also
may be used as a small pull box within the Holocom PDS.
The Retrofit Insert—Back Plate (SDS-IN-RTF) may be used in
conjunction with this enclosure thereby eliminating the need
to order and install surface mount boxes. The Retrofit Insert
also reduces installation time and provides a cleaner look
inside the enclosure. The door securely locks using Holocom’s
patented locking system and the Sargent and Greenleaf® padlock
(Page 20) 1.
4
H I G H S E C U R I T Y P U L L B OX
E N C L O S U R E S
PRODUCT CODE
SEC-WM-PB1-H1
18.0
This 16-gauge High Security Pull Box enclosure mounts
securely to walls and was designed to protect classified
cabling and allow for the proper amount of cable loop within
the enclosure. The door securely locks using Holocom’s
patented locking system and the Sargent and Greenleaf®
padlock (Page 20).
12.0
• Height 12" x Width 18" x Depth 4"
• 16-gauge electro-galvanized steel with welded seams
• Weight: 15 lbs
• Single door with 3-point security and padlock hasp
• Tamper-resistant design with welded internal hinges
• Powder Coat Finish: White Textured
4.0
H I G H S E C U R I T Y P U L L B OX
PRODUCT CODE
SEC-WM-PB2-H1
24.0
This 16-gauge High Security Pull Box enclosure mounts
securely to walls and was designed to protect classified
cabling and allow for the proper amount of cable loop within
the enclosure. The door securely locks using Holocom’s
patented locking system and the Sargent and Greenleaf®
padlock (Page 20).
• Height 16" x Width 24" x Depth 6"
• 16-gauge electro-galvanized steel with welded seams
• Weight: 26 lbs
• Single door with 3-point security and padlock hasp
• Tamper-resistant design with welded internal hinges
• Powder Coat Finish: White Textured
16.0
6.0
H I G H S E C U R I T Y P U L L B OX
PRODUCT CODE
SEC-WM-PB3-H1
24.0
This 16-gauge High Security Pull Box enclosure mounts
securely to walls and was designed to protect classified
cabling and allow for the proper amount of cable loop
within the enclosure. The door securely locks using
Holocom’s patented locking system and the Sargent and
Greenleaf® padlock (Page 20).
24.0
• Height 24" x Width 24" x Depth 6"
• 16-gauge electro-galvanized steel with welded seams
• Weight: 35 lbs
• Single door with 3-point security and padlock hasp
• Tamper-resistant design with welded internal hinges
• Powder Coat Finish: White Textured
6.0
858.222.6430
888.465.6266
www.hol ocom.com
customerservice@holocom.com
5
H I G H S E C U R I T Y P U L L B OX
PRODUCT CODE
SEC-WM-PB5-H1
18.0
12.0
• Height 12" x Width 18" x Depth 6"
• 16-gauge electro-galvanized steel with welded seams
• Weight: 17 lbs
• Single door with 3-point security and padlock hasp
• Tamper-resistant design with welded internal hinges
• Powder Coat Finish: White Textured
6.0
H I G H S E C U R I T Y P U L L B OX
30.0
PRODUCT CODE
SEC-WM-PB9-H1
This 16-gauge High Security Pull Box enclosure mounts
securely to walls and was designed to protect classified
cabling. Due to the larger dimensions, the PB9-H1 Enclosure
also may be used for passive equipment with added Patch
Panel Bracket (MBK-PP-04U-01). The door securely locks
using Holocom’s patented locking system and the Sargent
and Greenleaf® padlock (Page 20).
36.0
• Height 36" x Width 30" x Depth 9"
• 16-gauge electro-galvanized steel with welded seams
• Weight: 69 lbs
• Single door with 3-point security and padlock hasp
• Tamper-resistant design with welded internal hinges
• Powder Coat Finish: White Textured
9.0
HIGH SECURITY ENCLOSURE
6.0
PRODUCT CODE
SEC-WM-764-H5
This 12-gauge High Security Enclosure can be mounted on
walls or desktops and provides physical security for surface
mount boxes or any other connection point. The door securely
locks using Holocom’s patented locking system and the
Sargent and Greenleaf® padlock (Page 20).
7.5
• Height 7.5" x Width 6" x Depth 4.5"
• 12-gauge electro-galvanized steel
• Weight: 7 lbs
• Single door with security padlock hasp
• Tamper-resistant design with welded internal hinges
• Powder Coat Finish: White Textured
4.5
www.holocom.com
customerservice@holocom.com
858.222.6430
888.465.6266
E N C L O S U R E S
This 16-gauge High Security Pull Box enclosure mounts
securely to walls and was designed to protect classified
cabling and allow for the proper amount of cable loop
within the enclosure. The door securely locks using
Holocom’s patented locking system and the Sargent and
Greenleaf® padlock(Page 20).
6
HIGH SECURITY ENCLOSURE
E N C L O S U R E S
PRODUCT CODE
SEC-WM-885-H5
This 12-gauge High Security Enclosure can be mounted on
walls or desktops and provides physical security for surface
mount boxes or any other connection point. The 885 Enclosure
also may be used as a small pull box within the Holocom PDS.
The door securely locks using Holocom’s patented locking
system and the Sargent and Greenleaf® padlock (Page 20).
8.0
8.0
• Height 8" x Width 8" x Depth 5"
• 12-gauge electro-galvanized steel with welded seams
• Weight: 10 lbs
• Single door with security padlock hasp and pull tab
• Tamper resistant design with welded internal hinges
• Powder Coat Finish: White Textured
5.0
H I G H S E C U R I T Y P U L L B OX
PRODUCT CODE
SEC-WM-PB1-H5
This 12-gauge High Security Pull Box enclosure mounts
securely to walls and was designed to protect classified
cabling and allow for the proper amount of cable loop
within the enclosure. The door securely locks using
Holocom’s patented locking system and the Sargent and
Greenleaf® padlock (Page 20).
• Height 12” x Width 18” x Depth 4”
• 12-gauge electro-galvanized steel with welded seams
• Weight: 24 lbs
• Single door with 3-point security and padlock hasp
• Tamper-resistant design with welded internal hinges
• Powder Coat Finish: White Textured
18.0
12.0
4.0
H I G H S E C U R I T Y P U L L B OX
PRODUCT CODE
SEC-WM-PB2-H5
This 12-gauge High Security Pull Box enclosure mounts
securely to walls and was designed to protect classified
cabling and allow for the proper amount of cable loop
within the enclosure. The door securely locks using
Holocom’s patented locking system and the Sargent and
Greenleaf® padlock (Page 20).
• Height 16” x Width 24” x Depth 6”
• 12-gauge electro-galvanized steel with welded seams
• Weight: 42 lbs
• Single door with 3-point security and padlock hasp
• Tamper-resistant design with welded internal hinges
• Powder Coat Finish: White Textured
24.0
16.0
6.0
858.222.6430
888.465.6266
www.holocom.com
customerservice@hol ocom.com
7
H I G H S E C U R I T Y P U L L B OX
PRODUCT CODE
SEC-WM-PB3-H5
24.0
24.0
• Height 24” x Width 24” x Depth 6”
• 12-gauge electro-galvanized steel with welded seams
• Weight: 57 lbs
• Single door with 3-point security and padlock hasp
• Tamper-resistant design with welded internal hinges
• Powder Coat Finish: White Textured
6.0
H I G H S E C U R I T Y P U L L B OX
PRODUCT CODE
SEC-WM-PB4-H5
24.0
This 12-gauge High Security Pull Box enclosure mounts
securely to walls and was designed to protect classified
cabling and allow for the proper amount of cable loop
within the enclosure. The door securely locks using
Holocom’s patented locking system and the Sargent and
Greenleaf® padlock (Page 20).
24.0
• Height 24” x Width 24” x Depth 10”
• 12-gauge electro-galvanized steel with welded seams
• Weight: 68 lbs
• Single door with 3-point security and padlock hasp
• Tamper-resistant design with welded internal hinges
• Powder Coat Finish: White Textured
10.0
H I G H S E C U R I T Y P U L L B OX
12.0
PRODUCT CODE
SEC-WM-118-H5
This 12-gauge High Security Pull Box enclosure mounts
securely to walls and was designed to protect classified
cabling and allow for the proper amount of cable loop
within the enclosure. The door securely locks using
Holocom’s patented locking system and the Sargent and
Greenleaf® padlock (Page 20).
12.0
• Height 12” x Width 12” x Depth 8”
• 12-gauge electro-galvanized steel with welded seams
• Weight: 22 lbs
• Single door with 3-point security and padlock hasp
• Tamper-resistant design with welded internal hinges
• Powder Coat Finish: White Textured
8.0
www.holocom.com
customerservice@holocom.com
858.222.6430
888.465.6266
E N C L O S U R E S
This 12-gauge High Security Pull Box enclosure mounts
securely to walls and was designed to protect classified
cabling and allow for the proper amount of cable loop
within the enclosure. The door securely locks using
Holocom’s patented locking system and the Sargent and
Greenleaf® padlock (Page 20).
8
I P S J U N C T I O N B OX
E N C L O S U R E S
PRODUCT CODE
SAP-IM-SE1-H1
8.0
Holocom custom-designed the secure IPS Junction Box to join
the Holocom PDS to the Hamilton Safe® COMSEC Information
Processing System (IPS) container. Four manufactured
mounting points and a cutout align with corresponding points
on the Hamilton IPS. The door locks securely with a Sargent &
Greenleaf® padlock (Page 20).
10.0
• Height 10” x Width 8” x Depth 8”
• 16-gauge electro-galvanized steel
• Weight: 7.5 lbs
• Removable drop-down door with back flange
• Four (4) manufactured mounting points and cutout matches to
Hamilton IPS
• Welded door hasp for Sargent & Greenleaf® padlock
• Powder Coat Finish: White Textured
8.0
E X T E R I O R B U I L D I N G C O M M U N I C AT I O N S E N C L O S U R E
PRODUCT CODE
SEC-WM-EXT1-H1
20.00
CABLEMANAGEMENTRINGS
The Exterior Building Communications Enclosure (EXT1)
provides an interface between mobile military communications
platforms and building voice/data networks. This vehicle-tobuilding interface allows real-time communications to feed into
a building’s office, conference room, VTC room, or operations
center from a tactical communications platform parked outside
the building. Exterior door closes with cam, control rods,
and an exterior-rated handle and provides environmental
protection to the cable interface.
CONNECTOR MOUNTING PLATE
26.00
• Length 26” x Width 20” x Depth 10”
• 16-gauge electro-galvanized steel
• Weight 45 lbs
• Four (4) cable pass-through slots
• Connector mounting plate shown is for TFOCA-II® Flange Mount
Receptacle. May be ordered to meet other customer specifications
(Product Code: EXT1-MP-xx sold separately)
• Interior, non-locking, hinged access door covers cable connections
• Secure 3-point door closure
• Exterior rated door handle accepts Sargent & Greenleaf® padlock (Page 20)
• Powder Coat Finish: Dark Gray Textured
10.00
NON-LOCKING, HINGED ACCESS DOOR
4XCABLEPASSTHROUGHSLOTS
NOTES:
858.222.6430
888.465.6266
www.holocom.com
customerservice@hol ocom.com
9
S E C U R E R A C E W AY - S T E E L 1 0 0 F E E T
PRODUCT CODE
SDS-WM-RCW-ST
TOPCAP
1.8
S
HE
120
INC
2.0
1.5
S
HE
1.9
1.5
INC
120
RACEWAY
S E C U R E R A C E W AY - S T E E L 5 0 F E E T
PRODUCT CODE
SDS-WM-RCW-ST-05
TOPCAP
1.8
60
S
HE
INC
2.0
1.5
1.9
1.5
60
S
HE
INC
RACEWAY
PRODUCT CODE
SDS-WM-RCW-AL
TOPCAP
1.8
The wall-mounted 2" x 2" Aluminum Secure Raceway encloses
and protects secure network cables. The Aluminum Secure
Raceway comes in 10-foot sections in a 100"kit and comprises
two pieces: the Raceway and TopCap. With the addition of
other locking components, the Raceway and TopCap securely
lock together.
120
HE
INC
S
• .060" 6063-T5 Aluminum
• Components:
- High Security Raceway: Length 120" x Width 1.9" x Height 1.8"
- High Security TopCap: Length 120" x Width 2.0" x Height 1.8"
• Total length: 120" sections of Raceway and TopCap (10 each)
• Total weight: 100 lbs Raceway and TopCap
• Powder Coat Finish: White Textured
2.0
120
1.9
0
www.holocom.com
customerservice@holocom.com
HE
INC
S
RACEWAY
858.222.6430
888.465.6266
R A C E WAY
S E C U R E R A C E W AY - A L U M I N U M
( SDS)
MANUFACTURED
MOUNTING POINT
• 16-gauge electro-galvanized steel
• Components:
- High Security Raceway: Length 60" x Width 1.9" x Height 1.8"
- High Security TopCap: Length 60" x Width 2.0" x Height 1.8"
• Total length: 60" sections of Raceway and TopCap (10 each)
• Total weight: 127 lbs Raceway and TopCap
• Two (2) manufactured mounting points in each 60" raceway section
- 1½" from ends of each 60" raceway
- Located along raceway center line
• Powder Coat Finish: White Textured
SYSTEM
The wall-mounted 2" x 2" Secure Raceway, now available in
convenient five-foot lengths in a 50"kit, encloses and protects
secure network cables. The Secure Raceway comprises two
pieces: the Raceway and TopCap. Manufactured mounting
points on the Raceway allow a simplified, labor-saving
mounting technique. With the addition of other locking
components, the Raceway and TopCap securely lock together.
D I S T R I B UTION
MANUFACTURED
MOUNTING POINT
• 16-gauge electro-galvanized steel
• Components:
- High Security Raceway: Length 120" x Width 1.9" x Height 1.8"
- High Security TopCap: Length 120" x Width 2.0" x Height 1.8"
• Total length: 120" sections of Raceway and TopCap (10 each)
• Total weight: 254 lbs Raceway and TopCap
• Two (2) manufactured mounting points in each 120" raceway section
- 1½" from ends of each 120" raceway
- Located along raceway center line
• Powder Coat Finish: White Textured
S E C U R E
The wall-mounted 2" x 2" Secure Raceway encloses and
protects secure network cables. The Secure Raceway comes
in 10-foot sections in a 100"kit and comprises two pieces: the
Raceway and TopCap. Manufactured mounting points on the
Raceway allow a simplified, labor-saving mounting technique.
With the addition of other locking components, the Raceway
and TopCap securely lock together.
10
STEEL LOCKING KIT
The Steel Raceway Locking Kit is required to securely lock
down the Secure Raceway. When in “lock-down” position,
the entire raceway is secure and the enclosed cables are
protected. Releasing the lock enables the raceway to be
repositioned and expanded for future Moves, Adds and
Changes. The Steel Locking Kit is used with steel and
aluminum Secure Raceway.
• 16-gauge electro-galvanized steel
• Components:
- Raceway Lock Connector: Length 6" x Width 2" x Height 2"
- TopCap Starter: Length 6" x Width 2" x Height 2"
- Lock assembly with 30" lanyard
• Used with Steel and Aluminum Secure Raceway
• Total Weight: 2 lbs
• Powder Coat Finish: White Textured
LOCK CONNECTOR
LOCKBODYASSEMBLY
TOPCAP STARTER
2.0
1.9
6.0
6.0
END-TO-END CONNECTOR
PRODUCT CODE
SDS-CT-EE6-ST
The End-to-End Connector securely joins two sections of
Secure Raceway TopCap. It is used with both steel and
aluminum Secure Raceway.
6.0
• 16-gauge electro-galvanized steel
• Length 6" x Width 2" x Height 1.9"
• Weight: 1 lb
• Powder Coat Finish: White Textured
1.9
2.0
SE C URE
DISTRIBUTION
SYS T E M
( S D S )
RACE WAY
PRODUCT CODE
SDS-LK-KIT-ST
NOTES:
858.222.6430
888.465.6266
www.holocom.com
customerservice@hol ocom.com
11
UNIVERSAL CONNECTOR
PRODUCT CODE
SDS-CT-UNI
8.0
• Length 8.0" x Width 4.5" x Depth 4.5"
• 16-gauge electro-galvanized steel
• Weight: 4 lbs
• Double-action spring-lock mechanism with 30" lanyard
• Powder Coat Finish: White Textured
4.5
RUN END CONNECTOR
PRODUCT CODE
SDS-WM-REC
RUN END CONNECTOR
7.6
3.9
1.9
• 16-gauge electro-galvanized steel
• Length 7.6" x Width 1.9" x Depth 1.9"
• Total weight 1.5 lbs
• Two (2) manufactured mounting points located along base center line
• Powder Coat Finish: White Textured
PRODUCT CODE
SDS-CT-INF-ST
2.25
The Secure Interface Sleeve (INF) is designed to transition the
Secure Raceway to a Secure Enclosure or Through-Wall Kit.
The INF connects all of the Holocom High Security Enclosures
to Secure Raceway. Holocom improved upon its original INF
by redesigning the flange shape from square to round. The
round flange completely covers the penetration hole and
eliminates the need to align an additional part previously used
for ensuring aesthetics. By changing the design of this one
component in the INF, installation requires fewer parts thereby
improving installation efficiency.
2.25
2.5
2"CONDUITBUSHING
.125
3.25
www.holocom.com
customerservice@holocom.com
2"CONDUITLOCKNUT
• Height 2.5" x Width 2.25" x Depth x 2.25"
• Flange Diameter 3.25" x Thickness .125"
• Electro-galvanized steel
• 2" NPT external threads
• Includes 2" Conduit Locknut and 2" Conduit Bushing
• Total weight: 1 lb
• Powder Coat Finish: White Textured
858.222.6430
888.465.6266
C ON N E C TO R S
I N T E R FA C E S L E E V E ( I N F )
( SDS)
1.8
SYSTEM
TOPCAP STARTER
The Run End Connector, with welded end cap, provides a
solution for ending a section of Secure Raceway within a room
or hallway. If used in conjunction with the Reducing ThreeWay Connector (SMD-CT-3WY), the supplied TopCap starter
can be used instead of the longer 6” TopCap starter from the
Steel Locking Kit (SDS-LK-KIT-ST). In a standalone Secure
Raceway run, the Run End Connector may be used instead of
the Universal Connector (SDS-CT-UNI) or lockable enclosure
to end the run. The Run End Connector also may be used
in conjunction with a 1, 5, or 7 Through-Wall Kit to connect
Secure Raceway or Secure Mini Dukt™ to the run.
D I S T R I B UTION
4.5
S E C U R E
The Universal Connector is a versatile connector that allows
the Secure Raceway to navigate around obstructions,
columns, and off-set walls, as well as cross hallways at
end runs
12
9 0 ° I N T E R FA C E S L E E V E
S E C U RE
DISTRIBUTION
SYSTE M
( S D S )
CO NNE CTO RS
PRODUCT CODE
SDS-CT-INF-90
The 90° Interface Sleeve provides a seamless 90° transition
from enclosures or Through-Wall Kits to the Secure Raceway.
Holocom improved upon its original INF-90 by redesigning
the flange shape from square to round. The round flange
completely covers the penetration hole and eliminates the
need to align an additional part previously used for ensuring
aesthetics. By changing the design of this one component,
installation requires fewer parts thereby improving installation
efficiency.
2.9
3.25 DIA
5.5
2.25
• Length 5.5" x Width 2.9" x Depth 2.25"
• Round flange, Diameter 3.25" x Thickness .125"
• Electro-galvanized steel
• 2" NPT external threads
• Includes 2" Conduit Locknut and 2" Conduit Bushing
• Total Weight: 3 lbs
• Powder Coat Finish: White Textured
2"CONDUITBUSHING
2"CONDUITLOCKNUT
2.25
90° CONNECTOR
PRODUCT CODE
SDS-CT-090
MANUFACTURED
MOUNTING POINTS X3
The 90° Connector allows Secure Raceway to perform a
right-angle turn while traveling on a flat surface. The new 90°
Connector eliminates the internal locking mechanism and
provides more free cable space. With the same height/width
outside dimensions as Secure Raceway and TopCap, the
updated 90° Connector allows a mounting technique consistent
with that used for Raceway/TopCap end joints and other
Holocom connectors. The new 90° Connector also weighs less
and is smaller thereby allowing mounting in tighter spaces.
Attach to Secure Raceway with two (2) Secure Raceway Joints
(in kits SDS-RW-AKT-03 and SDS-RW-BRG and individually
SDS-RW-SRJ), one (1) End-to-End Connector (SDS-CT-EE6-ST),
and one (1) Steel Locking Kit (SDS-LK-KIT-ST).
3"RADIUS
7.00 X2
• 16-gauge electro-galvanized steel
• Weight: 2 lbs
• Three (3) manufactured mounting points located along connector center line
• Powder Coat Finish: White Textured
90° INTERNAL CONNECTOR
PRODUCT CODE
SDS-CT-90i
The 90° Internal Connector allows Secure Raceway to perform
a right-angle turn on an inside corner. The new Connector
eliminates the internal locking mechanism and provides
more free cable space. With the same height/width outside
dimensions as Secure Raceway and TopCap, the updated 90°
Internal Connector allows a mounting technique consistent
with that used for Raceway/TopCap end joints and other
Holocom connectors. The new Connector also weighs less and
is smaller thereby allowing mounting in tighter spaces. Attach
to Secure Raceway with two (2) Secure Raceway Joints (in kits
SDS-RW-AKT-02/03 and SDS-RW-BRG and individually SDSRW-SRJ), one (1) End-to-End Connector (SDS-CT-EE6-ST), and
one (1) Steel Locking Kit (SDS-LK-KIT-ST).
• 16-gauge electro-galvanized steel
• Weight: 3 lbs
• Two (2) manufactured mounting points located along connector center line
• Powder Coat Finish: White Textured
858.222.6430
888.465.6266
5.00 x2
3"RADIUS
MANUFACTURED
MOUNTING POINTS X2
www.holocom.com
customerservice@hol ocom.com
13
90° EXTERNAL CONNECTOR
PRODUCT CODE
SDS-CT-90e
3"RADIUS
• 16-gauge electro-galvanized steel
• Weight: 3 lbs
• Two (2) manufactured mounting points located along connector center line
• Powder Coat Finish: White Textured
I N T E R N A L T H R E E - W AY C O N N E C T O R
PRODUCT CODE
SDS-CT-3IN
( SDS)
• Length 15.2" x Width 7.9" x Depth 2.2"
• 16-gauge electro-galvanized steel
• Weight: 2.5 lbs
• Attaches to raceway with secure clips
• Powder Coat Finish: White Textured
PRODUCT CODE
SDS-CT-3WY
The T-shaped Three-Way Connector provides a right-angle turn
along a wall and is often used to provide a connection between
the main Secure Raceway and the drop to an end-user
enclosure. This two-piece connector consists of a base and
cover which come apart through the double-action spring-lock
mechanism. Three manufactured mounting points on the base
allow a simplified, labor-saving mounting technique.
• 16-gauge electro-galvanized steel
• Weight: 4 lbs
• Double-action spring-lock mechanism
• Three (3) manufactured mounting points located along connector
center line
• Powder Coat Finish: White Textured
www.holocom.com
customerservice@holocom.com
858.222.6430
888.465.6266
C ON N E C TO R S
T H R E E - W AY C O N N E C T O R
MANUFACTURED MOUNTING
POINTS X3
SYSTEM
The Internal Three-Way Connector splits the Secure Raceway
run, allowing the original run to continue while another run
spans across a hallway to the opposite wall. Holocom recently
improved upon its original Internal Three-Way Connector by
consolidating two pieces into one. The design to a single-piece
connector makes installation easier and faster.
D I S T R I B UTION
6.90 X2
S E C U R E
The 90° External Connector allows Secure Raceway to perform
a right-angle turn on an outside corner. The new Connector
eliminates the internal locking mechanism and provides
more free cable space. With the same height/width outside
dimensions as Secure Raceway and TopCap, the updated 90°
External Connector allows a mounting technique consistent
with that used for Raceway/TopCap end joints and other
Holocom connectors. The new Connector also weighs less and
is smaller thereby allowing mounting in tighter spaces. Attach
to Secure Raceway with two (2) Secure Raceway Joints (in kits
SDS-RW-AKT-02/03 and SDS-RW-BRG and individually SDSRW-SRJ), one (1) End-to-End Connector (SDS-CT-EE6-ST), and
one (1) Steel Locking Kit (SDS-LK-KIT-ST).
MANUFACTURED
MOUNTING POINTS X2
14
OFFSET CONNECTOR 4 INCH
11.0
S E C U RE
DISTRIBUTION
SYSTE M
( S D S )
CO NNE CTO RS
PRODUCT CODE
SDS-CT-OFF-04
The Offset Connector 4 Inch greatly simplifies and expedites
installation of Secure Raceway around a column with a 4"
depth. Offset Connectors reduce the number of parts previously
required to mount the raceway around a column, providing a
cleaner appearance and reducing material and labor costs. The
Offset Connector 4 Inch is conveniently packaged in sets of two
connectors (Product Code: SDS-CT-COL-01). Refer to SDS-CTCOL-01 for installation guidelines.
6.0
4.0
1.0
TOPCAP
1.5
• 16-gauge electro-galvanized steel
• Components:
- Raceway: Length 11" x Width 6" x Height 1.8"
- TopCap: Length 11" x Width 6" x Height 1.9"
• Total Weight: 2.30 lbs
• Two (2) manufactured mounting points in each Raceway section
- 1.5" from each end
- Located along center line
• Powder Coat Finish: White Textured
RACEWAY
1.9
1.5
1.8
MANUFACTURED
MOUNTING POINT
OFFSET CONNECTOR 8 INCH
PRODUCT CODE
SDS-CT-OFF-08
15.0
The Offset Connector 8 Inch greatly simplifies and expedites
installation of Secure Raceway around a column with an
8” depth. Offset Connectors reduce the number of parts
previously required to mount the raceway around a column,
providing a cleaner appearance and reducing material and
labor costs. The Offset Connector 8 Inch is conveniently
packaged in sets of two connectors (Product Code: SDS-CTCOL-02). Refer to SDS-CT-COL-02 for installation guidelines.
8.0
• 16-gauge electro-galvanized steel
• Components:
- Raceway: Length 15” x Width 10” x Height 1.8”
- TopCap: Length 15” x Width 10” x Height 1.9”
• Total Weight: 3.42 lbs
• Two (2) manufactured mounting points in each Column Connector
- 1.5” from each end
- Located along raceway center line
• Powder Coat Finish: White Textured
1.0
1.5
TOPCAP
10.0
RACEWAY
1.9
1.5
1.8
MANUFACTURED
MOUNTING POINT
COLUMN CONNECTOR 4 INCH
11.0
PRODUCT CODE
SDS-CT-COL-01
The Column Connector 4 Inch offers the convenience of two (2)
Offset Connectors 4 Inch (SDS-CT-OFF-04) packaged together in
a single product. The Offset Connectors 4 Inch greatly simplify
and expedite installation of Secure Raceway around a column
with a 4" depth. For most applications, installation would require
one (1) Column Connector 4 Inch joined by four (4) Secure
Raceway Joints (SDS-RW-SRJ), three (3) sections of Raceway and
TopCap, one (1) Steel Locking Kit (SDS-LK-KIT-ST), and three (3)
End-to-End Connectors (SDS-CT-EE6-ST).
• 16-gauge electro-galvanized steel
• Components:
- Two (2) pieces Raceway: Length 11" x Width 6" x Height 1.8"
- Two (2) pieces TopCap: Length 11" x Width 6" x Height 1.9"
• Total Weight: 4.60 lbs
• Two (2) manufactured mounting points in each Offset Connector
- 1.5" from each end
- Located along raceway center line
• Powder Coat Finish: White Textured
858.222.6430
888.465.6266
4.0
6.0
1.0
TOPCAP
1.5
RACEWAY
1.9
1.8
1.5
MANUFACTURED
MOUNTING POINT
PRODUCT CONTAINS 2X SDS-CT-OFF-04
www.holocom.com
customerservice@hol ocom.com
COLUMN CONNECTOR 8 INCH
1.0
RACEWAY
• 16-gauge electro-galvanized steel
• Components:
- Two (2) pieces Raceway: Length 15" x Width 10" x Height 1.8"
- Two (2) pieces TopCap: Length 15" x Width 10" x Height 1.9"
• Total Weight: 6.84 lbs
• Two (2) manufactured mounting points in each Offset Connector
- 1.5" from each end
- Located along raceway center line
• Powder Coat Finish: White Textured
1.5
1.8
MANUFACTURED
MOUNTING POINT
PRODUCT CONTAINS 2X SDS-CT-OFF-08
45° INTERNAL CONNECTOR
TOPCAP
PRODUCT CODE
SDS-CT-45i
1.0
5.8
1.9
MANUFACTURED
MOUNTING POINT
1.8
1.5
RACEWAY
PRODUCT CODE
SDS-CT-45e
7.4
4.3
1.9
TOPCAP
1.8
1.5
RACEWAY
1.5
MANUFACTURED
MOUNTING POINT
www.holocom.com
customerservice@holocom.com
1.0
45°
The 45° External Connector mates with the 45° Internal Connector
(SDS-CT-45i) to install Secure Raceway around obstacles with
a wall depth too shallow for the 90° Connectors (SDS-CT-90i /
SDS-CT-90e). The 45° Connectors reduce the number of parts
previously required, provide a cleaner appearance, and reduce
material and labor costs. For most applications, installation would
require one 45° External Connector and one 45° Internal Connector
joined by four (4) Secure Raceway Joints (SDS-RW-SRJ), three (3)
sections of Raceway and TopCap, one (1) Steel Locking Kit (SDS-LKKIT-ST), and three (3) End-to-End Connectors (SDS-CT-EE6-ST).
• 16-gauge electro-galvanized steel
• Components:
- Raceway: Length 7.4" x Width 4.3" x Height 1.8"
- TopCap: Length 7.4" x Width 4.3" x Height 1.9"
• Total Weight: 1.35 lbs
• Two (2) manufactured mounting points in each Raceway section
- 1.5" from each end
- Located along center line
• Sold individually but used in conjunction with the 45° Internal Connector
(SDS-CT-45i)
• Powder Coat Finish: White Textured
858.222.6430
888.465.6266
C ON N E C TO R S
45° EXTERNAL CONNECTOR
( SDS)
• 16-gauge electro-galvanized steel
• Components:
- Raceway: Length 5.8" x Width 3.8" x Height 1.8"
- TopCap: Length 5.8" x Width 3.8" x Height 1.9"
• Total Weight: .99 lbs
• Two (2) manufactured mounting points in each Raceway section
- 1.5" from each end
- Located along center line
• Sold individually but used in conjunction with the 45° External
Connector (SDS-CT-45e)
• Powder Coat Finish: White Textured
1.5
SYSTEM
The 45° Internal Connector mates with the 45° External Connector
(SDS-CT-45e) to install Secure Raceway around obstacles with a wall
depth too shallow for the 90° Connectors (SDS-CT-90i / SDS-CT-90e).
The 45° Connectors reduce the number of parts previously required,
provide a cleaner appearance, and reduce material and labor costs.
For most applications, installation would require one 45° External
Connector and one 45° Internal Connector joined by four (4) Secure
Raceway Joints (SDS-RW-SRJ), three (3) sections of Raceway and
TopCap, one (1) Steel Locking Kit (SDS-LK-KIT-ST), and three (3)
End-to-End Connectors (SDS-CT-EE6-ST).
3.8
45°
D I S T R I B UTION
1.9
The Column Connector 8 Inch offers the convenience of two (2)
Offset Connectors 8 Inch (SDS-CT-OFF-08) packaged together
in a single product. The Offset Connectors 8 Inch greatly
simplify and expedite installation of Secure Raceway around
a column with an 8" depth. For most applications, installation
would require one (1) Column Connector 8 Inch joined by four
(4) Secure Raceway Joints (SDS-RW-SRJ), three (3) sections of
Raceway and TopCap, one (1) Steel Locking Kit (SDS-LK-KIT-ST),
and three (3) End-to-End Connectors (SDS-CT-EE6-ST).
S E C U R E
10.0
8.0
1.5
15
PRODUCT CODE
SDS-CT-COL-02
15.0
TOPCAP
16
#1 THROUGH-WALL KIT
SE C U RE
D I ST RIBUTION
SYSTEM
( SDS )
T HRO UG H- WAL L
KITS
PRODUCT CODE
SDS-TW-001-12
SDS-TW-001-24
1"CONDUITBUSHINGX2
1"CONDUITNUTX2
TRIM RING X2
The updated #1 Through-Wall Kit provides a one-inch throughwall pathway in multiple installation scenarios, including:
• SDS 2”x2” Raceway to SDS 2”x2” Raceway
• SDS 2”x2” Raceway to User Drop Box or other enclosure
• User Drop Box to User Drop Box or other enclosure
1"NPTX12"/24"THREADEDPIPE
The newer components provide maximum inside diameter,
smoother cable movement, and a powder-coated trim ring and
coupler for a more finished appearance.
12"
24"
• Galvanized steel threaded pipe
• Total weight: 2 lbs
• Galvanized steel threaded pipe
• Total weight: 3 lbs
THROUGH-WALL KIT INCLUDES:
THROUGH-WALL KIT INCLUDES:
• One (1) – 1" x 12" NPT threaded
pipe
• Two (2) – 1" conduit bushings
• Two (2) – 1" conduit lock nuts
• Two (2) – 1” NPT powder-coated
couplers
• Two (2) – 1” Chase nipples
• Two (2) powder-coated trim rings
• One (1) – 1" x 24" NPT threaded
pipe
• Two (2) – 1" conduit bushings
• Two (2) – 1" conduit lock nuts
• Two (2) – 1” NPT powder-coated
couplers
• Two (2) – 1” Chase nipples
• Two (2) powder-coated trim rings
1"NPTPOWDERCOATEDCOUPLERX2
1"CHASENIPPLEX2
See: www.holocom.com/throughwall.html for installation instructions.
#2 THROUGH-WALL KIT
PRODUCT CODE
SDS-TW-002-12
SDS-TW-002-24
The updated #2 Through-Wall Kit provides a two-inch throughwall pathway from:
• Secure Large Carrier (SLC) Raceway to SDS 2”x2” Raceway
• SDS 2”x2” Raceway to a Holocom High Security Enclosure
The newer components provide maximum inside diameter,
smoother cable movement, and powder-coated trim ring and
coupler for a more finished appearance. 12"
24"
• Galvanized steel threaded pipe
• Total weight: 4 lbs
• Galvanized steel threaded pipe
• Total weight:7 lbs
THROUGH-WALL KIT INCLUDES:
THROUGH-WALL KIT INCLUDES:
• One (1) – 2" x 12" NPT
threaded pipe
• One (1) – 2" conduit bushing
• One (1) – 2" conduit lock nut
• One (1) – 2” NPT coupler
• One Interface Sleeve
• One (1) 2” NPT powder-coated
coupler
• One (1) trim ring
• One (1) 2” Chase nipple
• One (1) – 2" x 24" NPT
threaded pipe
• One (1) – 2” conduit bushing
• One (1) – 2” conduit lock nut
• One (1) – 2” NPT coupler
• One Interface Sleeve
• One (1) 2” NPT powder-coated
coupler
• One (1) trim ring
• One (1) 2” Chase nipple
2"CONDUITBUSHING
2"CONDUITLOCKNUT
INTERFACESLEEVE
2"NPTCOUPLER
TRIM RING
2"NPTX12"/24"THREADEDPIPE
2"NPTPOWDERCOATEDCOUPLER
2"CHASENIPPLE
See: www.holocom.com/throughwall.html for installation instructions.
NOTES:
858.222.6430
888.465.6266
www.holocom.com
customerservice@hol ocom.com
17
#4 THROUGH-WALL KIT
PRODUCT CODE
SDS-TW-004-12
SDS-TW-004-24
2"NPT12"/24"THREADEDPIPE
24"
• Galvanized steel threaded pipe
• Total weight: 5.1 lbs
• Galvanized steel threaded pipe
• Total weight: 7.6 lbs
THROUGH-WALL KIT INCLUDES:
THROUGH-WALL KIT INCLUDES:
• One (1) – 2" x 12" NPT
threaded pipe
• Two (2) – 2" NPT couplers
• Two (2) Interface Sleeves
• One (1) – 2" x 24" NPT
threaded pipe
• Two (2) – 2" NPT couplers
• Two (2) Interface Sleeves
2"NPTCOUPLERX2
INTERFACESLEEVEX2
See: www.holocom.com/throughwall.html for installation instructions.
#5 THROUGH-WALL KIT
PRODUCT CODE
SDS-TW-005-12
SDS-TW-005-24
1"CONDUITBUSHINGX2
1"CONDUITNUTX2
INTERFACESLEEVE
• SDS 2" x 2" Raceway to SDS 2"x 2" Raceway
• SDS 2" x 2" Raceway to Secure Mini Dukt™ (SMD) Tubing
• SDS 2" x 2" Raceway to User Drop Box or other enclosure
The newer components provide maximum inside diameter,
smoother cable movement, and powder-coated trim ring and
coupler for a more finished appearance.
TRIM RING
1"NPT12"/24"THREADEDPIPE
1"NPTPOWDERCOATEDCOUPLER
1"CHASENIPPLE
24"
• Galvanized steel threaded pipe
• Total weight: 7.6 lbs
THROUGH-WALL KIT INCLUDES:
THROUGH-WALL KIT INCLUDES:
• One (1) – 1" x 12" NPT
threaded pipe
• Two (2) – 1" conduit bushings
• Two (2) – 1" conduit lock nuts
• One (1) reducing washer
• One (1) Interface Sleeve
• One (1) 1" NPT powder-coated
coupler
• One (1) Chase nipple
• One (1) powder-coated trim ring
• One (1) – 2" x 24" NPT
threaded pipe
• Two (2) – 1" conduit bushings
• Two (2) – 1" conduit lock nuts
• One (1) reducing washer
• One (1) Interface Sleeve
• One (1) 1" NPT powder-coated
coupler
• One (1) Chase nipple
• One (1) powder-coated trim ring
K I T S
NOTES:
www.holocom.com
customerservice@holocom.com
T H R O U G H -WA L L
See: www.holocom.com/throughwall.html for installation instructions.
12"
• Galvanized steel threaded pipe
• Total weight: 2.1 lbs
( SDS)
REDUCING WASHER
SYSTEM
The updated #5 Through-Wall Kit provides a 1” through-wall
pathway in multiple installation scenarios including:
D I S T R I B UTION
12"
S E C U R E
This Through-Wall Kit provides a 2" through-wall pathway
from one Secure Raceway section to another Secure Raceway
section.
858.222.6430
888.465.6266
18
R A C E W AY AT TA C H M E N T K I T
The Raceway Attachment Kit contains two components:
Secure Raceway Joint (SRJ) and Secure Raceway Spacer.
The SRJ, which replaces the Bridge in the former Raceway
Attachment Kit, covers and adds rigidity to all Secure Raceway
end joints. Secure Raceway Spacers are used as a standoff to
provide 360-degree inspection of Holocom Secure Raceway.
When combined with the proper Hardware Kit, the Raceway
Attachment Kit provides the material necessary to securely
attach 100 feet of Holocom Secure Raceway to the wall.
5
3.7
1.0
1.8
AT TACHM E NT
KITS
PRODUCT CODE
SDS-RW-AKT-03
EACH RACEWAY ATTACHMENT KIT CONTAINS:
• Fifty (50) Secure Raceway Joints (SRJ)
• One Hundred (100) Nylon 6/6 White Raceway Spacers
Total Weight: 13 lb
.313 DIA
0.7
5
0.313 DIA
SE C UR E
DI STRIBUTION
SYSTEM
( S D S )
1.OO DIA
GYPSUM HARDWARE KIT
PRODUCT CODE
SDS-HW-GYP-02
The Gypsum Hardware Kit, when combined with the Raceway
Attachment Kit (SDS-RW-AKT-02), includes the necessary
materials to securely attach Holocom PDS components to
gypsum dry walls, hollow walls, panel walls, or steel studs.
One Gypsum Hardware Kit supports the installation of 100 feet
of Holocom Secure Raceway.
EACH KIT INCLUDES:
• Seventy (70) ¼-20 Toggle Bolts
• Seventy (70) ¼-20 x 3" Pan Phillips screws
• Ten (10) ¼-14 x 3" TEK Hex Washer Head screws
Total weight: 4.7 lbs
CONCRETE HARDWARE KIT
PRODUCT CODE
SDS-HW-CON-02
The Concrete Hardware Kit, when combined with the Raceway
Attachment Kit (SDS-RW-AKT-02), includes the necessary
materials to properly attach Holocom PDS components to
concrete or solid block walls. One Concrete Hardware Kit
supports the installation of 100 feet of Holocom Secure
Raceway.
EACH KIT INCLUDES:
• Fifteen (15) ¼" x 2 ¼" Hex Washer Head concrete screws
• Seventy (70) ¼" x 3 ¼" Hex Washer Head concrete screws
• Twenty (20) ¼" x 5" Hex Washer Head concrete screws
• Two (2) 3/16" x 6.5" Masonry drill bits
• Two (2) 5/16" x 6" Masonry drill bits
• Seventy (70) Alligator® flange anchors
Total Weight: 2.9 lbs
858.222.6430
888.465.6266
www.holocom.com
customerservice@hol ocom.com
19
R E T R O F I T I N S E R T - B A C K P L AT E
INCLUDES 6-32 J-STYLE CLIP FOR
STANDARD FACEPLATE ATTACHMENT
2.6
4.4
• Height 5.6" x Width 4.00" x Depth 2.6"
• 16-gauge electro-galvanized steel
• Weight .65 lbs
• Designed to fit High Security Enclosure SEC-WM-764-H1
• Integrated tension relief cable management wrap
• 6-32 U-style clip for a standard single-gang faceplate1 attachment
• Six (6) nylon tree push-in rivets for enclosure attachment
• Powder Coat Finish: White Textured
1
Compatible with most US single-gang faceplates. Angled connectors recommended
R E T R O F I T I N S E R T - B A C K P L AT E ( R T F 2 )
PRODUCT CODE
SDS-IN-RTF-02
1.9
INCLUDES 6X NYLON TREE PUSH-IN
RIVETSFORENCLOSUREATTACHMENT
6.2
6.0
PRODUCT CODE
SLD-RTF-764
PULL LANYARDS FOR UNLOCKING
The Retrofit Slam Lock Door for SEC-WM-764-H1 offers
customers an alternative door to the one supplied with
the 764 Enclosure (SEC-WM-764-H1). The Slam Lock Door
closes securely and eliminates the need to use a Sargent &
Greenleaf® High Security Padlock. Two pull lanyards release
each slam lock and are accessible by unlocking the Holocom
Secure Raceway.
• 16-gauge electro-galvanized steel door
• Weight 1.5 lbs
• Replaces door supplied with 764 Enclosure (SEC-WM-764-H1)
• Two slam locks connect to two pull lanyards for unlocking door
• Eliminates the need for a Sargent & Greenleaf® padlock.
• Powder Coat Finish: White Textured
DUAL SLAM LOCKS
www.holocom.com
customerservice@holocom.com
858.222.6430
888.465.6266
A C C E S S O R I E S
RETROFIT SLAM LOCK DOOR
( SDS)
CUT-OUT AND HOLE PATTERNS SUPPORT 2X
CORNING ® CLOSET CONNECTOR HOUSING
PANELS(CCH-CP)
• Height 6.2" x Width 6" x Depth 1.9"
• 16-gauge electro-galvanized steel
• Weight 1.25 lbs
• Fits into High Security Enclosure SEC-WM-885-H1
• Supports two (2) Corning Closet Connector Housing Panels (CCH-CP)
• Six (6) nylon tree push-in rivets for enclosure attachment
• Powder Coat Finish: White Textured
SYSTEM
The Retrofit Insert – Back Plate 2 (RTF2) is designed
specifically to fit inside the 885 High Security Enclosure
(SEC-WM-885-H1). The RTF2 is constructed of powder-coated
16-gauge, electro-galvanized steel and eliminates the need to
order and install surface mount boxes. The cut-out and hole
pattern are designed to support 2x Corning Closet Connector
Housing Panels (CCH-CP). Six nylon tree push-in rivets attach
the RTF2 to the 885 Enclosure.
6.4
D I S T R I B UTION
INCLUDES6XNYLONTREEPUSH-INRIVETS
FOR ENCLOSURE ATTACHMENT
4.0
The Retrofit Insert – Back Plate (RTF) is constructed of powder
coated 16-gauge, electro-galvanized steel and fits into High
Security Enclosure SEC-WM-764-H1. The RTF improves
installation efficiency by eliminating the need to order and
install surface mount boxes and provides a cleaner look inside
the enclosure. The RTF includes an integrated tension relief
cable management wrap, a 6-32 U-style clip for a standard
single-gang faceplate1 attachment, and six nylon tree push-in
rivets for attaching the RTF to the 764 Enclosure.
S E C U R E
5.6
TENSION RELIEF
CABLEWRAP
PRODUCT CODE
SDS-IN-RTF
20
CABLE MANAGEMENT BRACKET
• Length 1.5" x Width 1.8" x Height .4"
• 22-gauge electro-galvanized steel
• Not powder coated
• Weight .9 lbs per package
• Quantity: 30 per package
1.8
1.1
0.4
During installation, the Cable Management Bracket (CMB)
holds the network cabling in place in the raceway. This
eliminates the need to use Velcro® or zip ties which must be
removed prior to closing the raceway. The Cable Management
Brackets may be left in the raceway once the installation is
complete. Supplied in quantities of 30 per package.
1.5
S E C UR E
DISTRIBUTION
SYSTEM
( S D S )
ACCE S S O RIE S
PRODUCT CODE
SDS-RW-CMB
SARGENT AND GREENLEAF® LOCK
PRODUCT CODE
SDS-LK-SGL
The Sargent & Greenleaf® 8077AD Padlock is a specialized
combination padlock designed to show obvious evidence of
forced entry attempt. Unique serial numbers on three different
lock parts ensure that critical parts are not broken to gain
entry and then replaced. This Sargent & Greenleaf padlock is
designed to meet stringent U.S. government specifications and
is used in conjunction with all Holocom Secure Enclosures.
• Weight: 2 lbs
• Hardened steel shackle
• Meets stringent U.S. Government specifications
• 30-minute protection against expert manipulation
• 10-minute protection against surreptitious entry attack
• 125,000 possible lock combinations
• Reset lock combination with the included change key
S E C U R E R A C E W AY T O U C H - U P PA I N T
PRODUCT CODE
SDS-RW-PNT
The Secure Raceway Touch-Up Paint is a perfect match to the
powder coat of the Holocom Secure PathWay. It is fast drying
and includes an applicator brush.
• Waterborne Acrylic Urethane
• Weight: 0.5 lb
• Three (3) bottles Touch-Up Paint
• One (1) applicator brush per bottle
858.222.6430
888.465.6266
www.holocom.com
customerservice@hol ocom.com
21
S E C U R E R A C E W AY P U N C H T O O L
PRODUCT CODE
SDS-TL-HHP
• Weight: 4 lbs
PRODUCT CODE
SDS-GN-EXY
• Plastic
• Weight: 1 lb
KIT INCLUDES:
• One (1) - Applicator
• One (1) - 1:1 Plunger
• One (1) - 2:1 Plunger
SYSTEM
The Holocom Epoxy Gun, a 3M™ EPX applicator, specifically
works with 3M DP two-part epoxy dispensers and is used in
applying 3M Epoxy to the Secure Raceway.
D I S T R I B UTION
E P OX Y G U N
S E C U R E
The Holocom Secure Raceway Punch Tool quickly and
accurately punches mounting holes at the ends of the
Secure Raceway. This tool, custom made by Holocom, saves
substantial labor on medium to large jobs. It also improves the
accuracy of hole placement thereby reducing the likelihood of
waste and improving the fit and security of the entire system.
( SDS)
PRODUCT CODE
SDS-332781 E P O X Y
SDS-332784 NOZZLE
When required, Holocom provides an epoxy solution for
Secure Raceway consisting of 3M™ two-part epoxy, dispensed
using the 3M EPX nozzle.
• 3M™ DP100NS Translucent 2-part Epoxy (SDS-332781)
• 3M EPX mixing nozzle (SDS-332784)
• Sold separately in desired quantity
www.holocom.com
customerservice@holocom.com
858.222.6430
888.465.6266
A C C E S S O R I E S
S E C U R E R A C E W AY 3 M ® E P OX Y
E P OX Y N O Z Z L E
22
S E C U R E R A C E W AY J O I N T
S E C U R E R A C E W AY J O I N T K I T
S E C UR E
DISTRIBUTION
SYSTEM
( S D S )
0.75
The Secure Raceway Joint (SRJ) replaces the Bridge in
the Raceway Attachment Kit and makes Secure Raceway
installation faster and easier. The SRJ adds rigidity to all Secure
Raceway end-to-end joints, and in suspended applications,
replaces the Suspended Raceway Joint. The SRJ further
improves installation efficiency with mounting points that
align with the manufactured mounting points on the Secure
Raceway. This eliminates the need for epoxy at the joint.
0.5
0.313
2.7
• Length 3.75" x Width 1.8" x Height .75"
• Weight .19 lb each
• Not powder coated
• 16-gauge electro-galvanized steel
• Mounting points align with manufactured mounting points on Secure Raceway
• Replaces Bridge in Raceway Attachment Kit and Suspended Raceway Joint
• Fifty (50) per Raceway Attachment Kit (SDS-RW-AKT-03), Page 18
• One hundred (100) per Secure Raceway Joint Kit (SDS-RW-BRG)
• Available individually (SDS-RW-SRJ)
1.8
3.75
ACCE S S O RIE S
PRODUCT CODE
SDS-RW-SRJ J O I N T
SDS-RW-BRG K I T
S E C U R E R A C E W AY S PA C E R S W H I T E
PRODUCT CODE
SDS-RW-SPR-WT
The Raceway Spacers are used as a standoff to provide 360degree inspection of the Secure Raceway. They are supplied
in quantities of 100 and are also part of the Secure Raceway
Attachment Kit (SDS-RW-AKT-02) with 40 Spacers per kit.
Raceway Spacers are only available in a neutral white color
providing enhanced aesthetic appearance.
1.0
1.00 DIA
• 1.0" x 1.0"
• Nylon 6/6
• Color: White
• Total quantity: 100
• Total weight: 2.5 lbs
.313 DIA
6 " S E C U R E R A C E W AY S PA C E R W H I T E 
PRODUCT CODE
SDS-RW-SPR-WT6
The new, longer 6" Raceway Spacer provides a convenient
solution when installing Secure Raceway on walls with uneven
depths or irregular surfaces. Six-inch Spacers can be cut to
the required lengths thereby allowing a consistent standoff
depth along a section of Secure Raceway.
• 6.0" x 1.0"
• Nylon 6/6
• Color: White
• Sold individually
• Total weight: .19 lbs
858.222.6430
888.465.6266
.313 DIA
1.00 DIA
6.0
www.holocom.com
customerservice@hol ocom.com
23
4.5" TRIM RING
PRODUCT CODE
SDS-1003572
4.5
• 20-gauge electro-galvanized steel
• Length 4.5" x Width 4.5" x Thickness 20-guage
• 2.4" hole diameter
• 5 Trim Rings per package
• Total weight: 2.5 lbs
• Powder Coat Finish: White Textured
4.5
4.5" ROUND TRIM RING
PRODUCT CODE
SDS-1004527
• 18-gauge electro-galvanized steel
• 4.5" Diameter x Thickness 18-gauge
• 2.375 hole diameter
• 100 Trim Rings per package
• Weight .16 lb each; 16 lbs/pkg
• Powder Coat Finish: White Textured
( SDS)
2.375
PRODUCT CODE
SDS-1004526
1.375
www.holocom.com
customerservice@holocom.com
The 3.25” round cosmetic Trim Ring covers the hole made
when installing 1” diameter Through-Wall Kits through the
back of Secure Raceway or a Connector. The 3.25” Trim Ring
should be used in conjunction with a 1” conduit locknut (sold
separately).
• 18-gauge electro-galvanized steel
• 3.25" Diameter x Thickness 18-gauge
• 1.375 hole diameter
• 100 Trim Rings per package
• Weight .1 lb each; 10 lbs/pkg
• Powder Coat Finish: White Textured
858.222.6430
888.465.6266
A C C E SS O R I ES
3.25" TRIM RING
3.25
SYSTEM
4.5
The 4.5” Round Trim Ring provides an alternative to the 4.5”
square Trim Ring (SDS-1003572). Like the original 4.5” square
Trim Ring, the diameter of the hole is 2.4 inches and covers the
hole made when installing 2” diameter Through-Wall Kits.
D I S T R I B UTION
2.4
S E C U R E
The 4.5" Trim Ring covers the hole made when installing 2"
diameter Through-Wall Kits.
24
2” TRIM RING
1.9
The 2” Trim Ring covers the hole made when installing 1”
diameter Through-Wall Kits from one section of Secure
Raceway to another section of Secure Raceway or other
Holocom PDS component. The 2” Trim Ring should be used in
conjunction with a 1” conduit locknut (sold separately). The 2”
Trim Ring is identical to the Interface Sleeve Reducing Washer
(SDS-1002797) except that it has a white textured powder coat
finish. Supplied five per package.
1.9
• Length 1.9" x Width 1.9" x Thickness 16-gauge
• 16-gauge electro-galvanized steel
• 1.375 hole diameter
• 5 Trim Rings per package
• Weight: .1 lb each; .5 lbs/pkg
• Powder Coat Finish: White Textured
1.375
I N T E R FA C E S L E E V E R E D U C I N G W A S H E R
PRODUCT CODE
SDS-1002797
1.9
The Interface Sleeve (INF) Reducing Washer is the same
reducing washer currently contained in the #5 Through-Wall
Kit (SDS-TW-005-12/24). Supplied five per package.
• Length 1.9" x Width 1.9" x Thickness 16-gauge
• 16-gauge electro-galvanized steel
• Unpainted
• 1.375 hole diameter
• 5 INF Reducing Washers per package
• Weight: .1 lb each; .5 lbs/pkg
1.9
1.375
NOTES:
S E C UR E
DISTRIBUTION
SYSTEM
( S D S )
ACCE S S O RIE S
PRODUCT CODE
SDS-2002797
858.222.6430
888.465.6266
www.hol ocom.com
customerservice@holocom.com
25
SECURE MINI DUKT™
SECURE MINI DUKT™
S E C U R E
In response to customer requests, Holocom engineered S E C U R E M I N I D U K T ™ ,
a reduced profile cable carrier to use in conjunction with 2" x 2" Holocom Secure
Raceway. All components are powder-coated and match the aesthetics offered in
Holocom PDS. Constructed of 18-gauge galvanized steel, S E C U R E M I N I D U K T ™
meets the “spirit and intent” of NSTISSI 7003 and offers:
M I N I
• Smaller footprint on the wall without compromising security or user functionality
• Reduced number of parts resulting in labor efficiency and savings
• Decreased material cost including lower shipping costs
• Economic use of materials
C AT 6 C A B L E F I L L
.22 in.
1.2 in.
.65 in.
To discuss how Secure Mini Dukt™ can be incorporated into
your site requirements, contact customer service.
Patent Pending
www.holocom.com
customerservice@holocom.com
1.8 in.
1.40 in.
MAX = 45
MAX = 17
60%RACEWAYUSEABLESPACE=27
40% FILL = 6
858.222.6430
888.465.6266 0
OVERVIEW
Transition from 2" x 2"
Secure Raceway to
Secure Mini Dukt™
Tube using Reducing
Three-Way Connector
D U KT™
Secure Mini Dukt™
performing a right-angle
turn to a User Drop Box
26
TUBE
SEC U R E
M I N I
D U K T ™
PRODUCT CODE
SMD-WM-T50
The wall-mounted Secure Mini Dukt™ Tube is a reduced profile
cable carrier that provides a smaller footprint on the wall
without compromising sufficient cable capacity. Constructed
of 18-gauge steel, the single-piece Tube encloses and protects
secure network cables and integrates with Holocom PDS
Secure Raceway. With the addition of other Secure Mini Dukt™
components, the Tube can transition from Secure Raceway to
a User Drop Box.
.75
59 INCHES
1.5
.20 in.
• 18-gauge electro-galvanized steel
• Length 59" x Width 1.5" x Height .75"
• Supplied in 10 sections in a nominal 50-foot kit
• Total weight: 41 lbs
• Powder Coat Finish: White Textured
.22 in.
.65 in.
1.40 in.
.65 in.
1.40 in.
MULTIMODEFIBEROPTICCABLE
MAX=20CABLES
40%FILL=8CABLES
CAT6UTPCABLEFILL
MAX=17CABLES
40%FILL=6CABLES
MOUNTING BRACKET
PRODUCT CODE
SMD-WM-MB
The Secure Mini Dukt™ Mounting Bracket serves a dual purpose by providing the installation point for attaching Secure
Mini Dukt™ Tube to the wall and securely holding two ends
of Tube together. EMT, by contrast, requires both straps
and connectors to achieve a secure attachment to the wall.
The two-piece Mounting Bracket contains a built-in stopper
on both sides of the manufactured mounting point. This
simplifies installation and allows for a 2" overlap of Tube or
090 Connector with the Mounting Bracket without covering
the hole. The Mounting Bracket Bridge aligns with the stopper
inside the Mounting Bracket, covers the mounting point, and
provides security.
• Length 5" x Width 1.6" x Height .9"
• 18-gauge electro-galvanized steel
• Weight .34 lbs
• Manufactured mounting point along center line
• Mounting Bracket Bridge covers mounting point and provides security
• Powder Coat Finish: White Textured
5.0
.9
.625 DIA
MOUNTINGBRACKET
MOUNTINGBRACKETBRIDGE
1.6
M O U N T I N G B R A C K E T T hree - W ay C onnector
PRODUCT CODE
SMD-MB-3WY
The T-shaped Secure Mini Dukt™ Mounting Bracket Three-Way
Connector provides a right angle drop from two sections of
Secure Mini Dukt™ (SMD) Tube to a User Drop Box (SECWM-UDB3-H1). The new two-piece connector contains two
manufactured mounting points for easy installation and
serves as a mounting bracket for two sections of Tube. The
mounting bracket bridge slides inside the connector, covers
the mounting points, and provides a two-inch overlap with
SMD Tube at each end.
• Length 1.6" x Width 8" x Depth .9"
• 18-gauge electro-galvanized steel
• Weight 0.8 lbs
• Two manufactured mounting points along raceway centerline
• Mounting bracket bridge covers mounting points and
provides security
• Powder Coat Finish: White Textured
858.222.6430
888.465.6266
www.holocom.com
customerservice@hol ocom.com
27
R E D U C I N G T H R E E - W AY C O N N E C T O R
PRODUCT CODE
SMD-CT-3WY
REDUCING 3-WAY COVER
8.0
6.0
• 16-gauge electro-galvanized steel and 18-guage transition tube
• Length 8" x Width 1.9" x Depth 1.8"
• Weight 1.5 lbs
• Two manufactured mounting points located along base center line
• Powder Coat Finish: White Textured
1.9
SMD-3WY-REC-LT
PRODUCT CODE
SMD-3WY-REC-LT
SMD-3WY-REC-RT
The Secure Mini Dukt™ Three-Way Run End Connector combines
two products—the Reducing Three-Way Connector (SMD-CT-3WY) and
Run End Connector (SDS-CT-REC)—into a single product used to
end a section of Secure Raceway with a Secure Mini Dukt™ user drop.
The new connector improves labor efficiency by eliminating three
products previously required for installation. Two (2) manufactured
points along the base center line provide additional simplified
labor-saving installation. To connect the Three-Way Run End
Connector to a section of 2" x 2" Secure Raceway, use one Secure
Raceway Joint (SDS-CT-SRJ) and one End-to-End Connector (SDSCT-EE6-ST). Use the SMD-3WY-REC-LT for raceway runs that end
to the left. Use the SMD-3WY-REC-RT for raceway runs that end to
the right.
• 16-gauge electro-galvanized steel with 18-gauge transition tube
• Weight 2.0 lbs
• Two (2) manufactured mounting points along base center line
• Sold individually
• Powder Coat finish: White Textured
SMD-3WY-REC-RT
I N T E R FA C E S L E E V E
INTERNALLYTHREADEDINTERFACESLEEVE
PRODUCT CODE
SMD-CT-INF
The Secure Mini Dukt™ Interface Sleeve (INF) is designed to
transition Secure Mini Dukt™ Tube to a Secure Enclosure. The
18-gauge INF contains 1” internal threads and is supplied with
a 1” NPT threaded nipple, 1” conduit lock nut, and 1” conduit
bushing.
1"NPTTHREADEDNIPPLE
1"CONDUITLOCKNUT
• Electro-galvanized steel
• 1” NPT internal threads
• Total Weight .4 lbs
• Includes:
- Interface Sleeve
- 1” NPT threaded nipple
- 1” conduit lock nut
- 1” conduit bushing
• Powder Coat Finish: White Textured
1"CONDUITBUSHING
www.holocom.com
customerservice@holocom.com
858.222.6430
888.465.6266
D U KT™
T H R E E - W AY R U N E N D C O N N E C T O R L E F T
T H R E E - W AY R U N E N D C O N N E C T O R R I G H T
M I N I
REDUCING 3-WAY BASE
S E C U R E
1.8
The Reducing Three-Way Connector provides the transition
between 2" x 2" Secure Raceway and Secure Mini Dukt™,
usually leading to a User Drop Box. This T-shaped, two-piece
connector consists of a 16-gauge base and cover and an 18gauge transition tube welded to the base. Installation between
two sections of Secure Raceway requires one Steel Locking Kit
(SDS-LK-KIT-ST), one End-To-End Connector (SDS-CT-EE6-ST)
and two Secure Raceway Joints (SDS-RW-SRJ). When used
at the end of a Secure Raceway run, the installer would use
one Steel Locking Kit, one End-to-End Connector, two Secure
Raceway Joints, and one Run End Connector (SDS-WM-REC)
to complete the run.
28
9 0 º I N T E R FA C E S L E E V E
SEC U R E
M I N I
D U K T ™
PRODUCT CODE
SMD-CT-INF-90
INTERNALLYTHREADED90DEGREEINTERFACESLEEVE
The Secure Mini Dukt™ 90° Interface Sleeve (INF) provides a
seamless 90° transition from a Secure Enclosure or ThroughWall Kit to Secure Mini Dukt™ Tube. The internally threaded
90° INF has a 45° angled bend in the connector body allowing
smooth movement of cabling across the bend. The 90° INF is
supplied with a 1” NPT threaded nipple, 1” conduit lock nut,
and 1” conduit bushing. It can be used in conjunction with
Through-Wall Kits 1, 5, 6, and 7.
1"NPTTHREADEDNIPPLE
• Electro-galvanized steel
• 1” NPT internal threads
• Total Weight .5 lbs
• Includes:
- 90° Interface Sleeve
- 1” NPT threaded steel pipe
- 1” conduit lock nut
- 1” conduit bushing
• Powder Coat Finish: White Textured
1"CONDUITLOCKNUT
1"CONDUITBUSHING
90º CONNECTOR
PRODUCT CODE
SMD-CT-090
The Secure Mini Dukt™ 90° Connector allows Secure Mini
Dukt™ Tube to perform a right-angle turn while traveling
on a flat surface. The 90° Connector features a 3” bend
radius allowing smooth movement of cabling across the
bend. Installation requires two Secure Mini Dukt™ Mounting
Brackets (SMD-WM-MB) to transition between two sections of
Tube.
5.0
1.5
5.0
• 18-gauge electro-galvanized steel
• Length 5” x Width 5” x Depth .75”
• Weight .5 lbs
• Powder Coat Finish: White Textured
.75
90º CORNER CONNECTOR
PRODUCT CODE
SMD-CT-90C
The Secure Mini Dukt™ 90° Corner Connector allows Secure
Mini Dukt™ Tube to perform a right-angle turn on an inside or
outside corner. This compact, versatile connector provides a
3-inch bend radius allowing smooth movement of cable across
the corner. Two (2) Secure Mini Dukt™ Mounting Brackets
(SMD-WM-MB) – one for each end of the Corner Connector –
are required to mount the Connector and Tube to the wall.
• 18-gauge electro-galvanized steel
• Requires 2 Secure Mini Dukt Mounting Brackets (SMD-WM-MB),
sold separately
• Weight .5 lbs
• Powder Coat Finish: White Textured
858.222.6430
888.465.6266
3"RADIUS
2.0
www.holocom.com
customerservice@hol ocom.com
#6
29
THROUGH-WALL KIT
PRODUCT CODE
SMD-TW-006-12/24
INTERNALLYTHREADEDINTERFACESLEEVEX2
It is supplied in kits with 12” or 24” NPT threaded pipe and two
SMD Interface Sleeves. The Secure Mini Dukt™ INF is designed
with internal rather than external threads. This maximizes
installation efficiency in concrete walls by eliminating the need for
a larger diameter coupler and corresponding larger concrete core.
• Galvanized steel threaded pipe
• Total weight: 2.6 lbs
THROUGH-WALL KIT INCLUDES:
THROUGH-WALL KIT INCLUDES:
• One (1) - 1” x 12” NPT threaded
pipe
• Two (2) – Secure Mini Dukt™
Interface Sleeves
• One (1) - 1” x 24” NPT threaded
pipe
• Two (2) – Secure Mini Dukt™
Interface Sleeves
THROUGH-WALL KIT
PRODUCT CODE
SMD-TW-007-12/24
1"CONDUITBUSHING
1"CONDUITNUT
INTERNALLYTHREADEDINTERFACESLEEVE
TRIM RING
1"NPT12"/24"THREADEDPIPE
1"NPTPOWDERCOATEDCOUPLER
1"CHASENIPPLE
See: www.holocom.com/throughwall.html for installation instructions.
The updated #7 Secure Mini Dukt™ (SMD) Through-Wall Kit
provides a 1” through-wall pathway in multiple installation
scenarios, including:
• SMD Tube to SDS 2”x2” Secure Raceway or Secure Large
Carrier (SLC) Raceway
• SMD Tube with SMD Connector to SDS 2”x2” Raceway or
SLC Raceway
• SMD Tube to a User Drop Box or other enclosure
The newer components provide maximum inside diameter,
smoother cable movement, and powder-coated trim ring and
coupler for a more finished appearance.
12”
24”
• Galvanized steel threaded pipe
• Total weight: 2 lbs
• Galvanized steel threaded pipe
• Total weight: 3 lbs
THROUGH-WALL KIT INCLUDES:
THROUGH-WALL KIT INCLUDES:
• One (1) – 1” x 12” NPT
threaded pipe
• One (1) – 1” conduit bushing
• One (1) – 1” conduit lock nut
• One (1) – 1” Chase nipple
• One (1) – 1” NPT powder-coated
coupler
• One (1) trim ring
• One SMD Interface Sleeve
• One (1) – 1” x 24 ” NPT
threaded pipe
• One (1) – 1” conduit bushing
• One (1) – 1” conduit lock nut
• One (1) – 1” Chase nipple
• One (1) – 1” NPT powder-coated
coupler
• One (1) trim ring
• One SMD Interface Sleeve
G Y P S U M AT TA C H M E N T K I T
PRODUCT CODE
SMD-GYP-AKT
The Secure Mini Dukt™ Gypsum Attachment Kit contains the
materials necessary to properly attach Secure Mini Dukt™ to
gypsum dry walls, hollow walls, panel walls, or steel studs. One
Gypsum Attachment Kit supports the installation of 50 feet of
Secure Mini Dukt™ Tube supplied in one kit (SMD-WM-T50).
Note that 1” standoff spacers are included and are the same
item supplied in the Raceway Attachment Kit (SDS-RW-AKT-02).
Each kit includes:
• Twenty five (25) ¼-20 Toggle Bolts
• Twenty five (25) ¼-20 x 3” Pan Phillips screws
• Five (5) ¼-14 x 3” TEK Hex Washer Head screws
• Twenty (20) Nylon 6/6 White Raceway Spacers
Total weight: 4.5 lbs
www.holocom.com
customerservice@holocom.com
858.222.6430
888.465.6266
D U KT™
#7
24”
• Galvanized steel threaded pipe
• Total weight: 1.6 lbs
M I N I
See: www.holocom.com/throughwall.html for installation instructions.
12”
S E C U R E
1"NPTX12"/24"THREADEDPIPE
The #6 Secure Mini Dukt™ (SMD) Through-Wall Kit provides a
1” through-wall pathway connecting:
• SMD Tube to SMD Tube
• SMD Tube to a SMD connector
30
C O N C R E T E AT TA C H M E N T K I T
SE C U R E
M I N I
D U K T ™
PRODUCT CODE
SMD-CON-AKT
The Secure Mini Dukt™ Concrete Attachment Kit contains the
necessary materials to properly attach Secure Mini Dukt™
to concrete or solid block walls. One Concrete Attachment
Kit supports the installation of 50 feet of Secure Mini Dukt™
Tube supplied in one kit (SMD-WM-T50). Note that 1” standoff
spacers are included and are the same item supplied in the
Raceway Attachment Kit (SDS-RW-AKT-02).
Each kit includes:
• Ten (10) ¼” x 2 ¼” Hex Washer Head concrete screws
• Twenty five (25) ¼” x 3 ¼” Hex Washer Head concrete screws
• Ten (10) ¼” x 5” Hex Washer Head concrete screws
• One (1) 3/16” x 8” Masonry drill bits
• One (1) 5/16” x 8” Masonry drill bits
• Twenty five (25) Alligator® flange anchors
• Twenty (20) Nylon 6/6 White Raceway Spacers
Total Weight: 3.5 lbs
NOTES:
858.222.6430
888.465.6266
www.holocom.com
customerservice@hol ocom.com
31
SECURE LARGE CARRIER™
SECURE LARGE CARRIER™
S E C U R E
Introducing SECURE LARGE CARRIER™, the new large caliber raceway from Holocom®. SECURE LARGE CARRIER™ provides more than seven times the cable capacity of
industry standard Holocom 2" x 2" Secure Raceway, making it the perfect backbone
carrier for home run cable design systems. With SECURE LARGE CARRIER™, 2" x 2"
Secure Raceway, and Secure Mini Dukt™ users now have a complete complement of
Holocom cable carrier options for Protective Distribution System (PDS) design.
L A R G E
Benefits
• More than 7x the capacity of Holocom 2" x 2" Secure Raceway
• Satisfies high-density cable count requirements
• Powder coated, tamper evident finish
• Enhances inspection and NSTISSI 7003 compliance
• Used as a backbone carrier for home run cable design systems
• Eliminates the need for multiple parallel smaller cable carriers
• Interlocking parts allow moves, adds, and changes (MACs)
• Allows true inspection of cables/connections & reduces PDS lifecycle costs
• Familiar Holocom patented locking technology, drop-in cable
• Reduces installation time and cost
installation and installer-friendly mounting techniques
SECURE LARGE CARRIER™
Specifications
OVERVIEW
2.7 in.
• 16-gauge, electro-galvanized steel
.28 in .
• 6" x 3.5" two-piece secure raceway
• MAX 200 CAT 6 cable capacity
• Integrates with 2" x 2" Secure Raceway
and Secure Mini Dukt™
5.9 in.
2" x 2" SECURE RACEWAY
• White textured powder-coat finish
SECURE MINI DUKT™
.28 in.
• Supplied in 5' sections in a 20' kit
. 28 in .
1.8 in.
1.44 in .
M AX= 2 0 1
60% F IL L = 1 2 0
1.4 in.
1.2 in.
MAX= 2 8
6 0 % F IL L = 1 7
.65 in.
M AX= 1 0
4 0 % F IL L = 4
HOLOCOM® CABLE CARRIER OPTIONS
CAT 6 Cable Fill
To discuss how Secure Large Carrier™ can be incorporated into
your site requirements, contact customer service.
Patent Pending
www.holocom.com
customerservice@holocom.com
C ARRIER™
Features
858.222.6430
888.465.6266
32
R A C E W AY & T O P C A P K I T
TOPCAP
SECURE
L A R G E
C A R R I E R ™
PRODUCT CODE
SLC-WM-RCW-ST-20
2.0
1.8
Secure Large Carrier™ Raceway provides more than seven (7)
times the cable capacity of industry standard Holocom SDS
Secure Raceway, making it the perfect backbone carrier for home
run cable design systems. Like SDS Secure Raceway, it uses the
patented Holocom locking system enabling users to make moves,
adds, and changes. One manufactured mounting point at each end
of the raceway aligns with the Mounting Bracket for simplified,
labor-saving installation. Kit includes four (4) Secure Raceway
Joints (SLC-RW-SRJ).
• 16-gauge electro-galvanized steel
• Components:
- Raceway: Length 59” x Height 6” x Width 3.4”
- TopCap: Length 59” x Height 2” x Width 1.8”
- Secure Raceway Joint (SLC-RW-SRJ): Four (4) • Max 200 CAT 6 cable capacity
• Integrates with SDS Secure Raceway & Secure Mini Dukt™
• One manufactured mounting point 1.5” from each raceway end
• Supplied in 5’ sections in a 20’ kit
• Total kit weight: 97 pounds
• Powder Coat Finish: White Textured
59.0 INCHES
3.4
RACEWAY
1.5
6.0
59.0 INCHES
1.5
MOUNTING BRACKET
PRODUCT CODE
SLC-WM-MB
The Secure Large Carrier™ Mounting Bracket provides three
distinct functions. It holds two ends of connected raceway,
provides the raceway installation point, and stands the
raceway one inch off the wall. The Mounting Bracket has four
(4) integrated one-inch spacers and four (4) manufactured
mounting points for simplified, labor-saving installation. The
two upper mounting points align with the mounting points on
the two ends of adjoining raceway or connector.
• 16-gauge electro-galvanized steel
• Four (4) manufactured mounting points including two (2)
manufactured mounting points that align with each adjoining
section of raceway
• Four integrated one-inch spacers allow 360° inspection
• Packaged individually
• Weight 1.75 lbs
• Powder Coat Finish: White Textured
S E C U R E R A C E W AY J O I N T
PRODUCT CODE
SLC-RW-SRJ
The Secure Large Carrier™ Secure Raceway Joint adds
rigidity to all Secure Large Carrier™ Raceway or Connector
end-to-end joints. Two (2) manufactured mounting points
align with the MMPs on the Secure Large Carrier™ Mounting
Bracket and Raceway or Mounting Bracket and Connector
(SLC-CT-90i/ SLC-CT-90e) allowing simplified, labor-saving
installation.
• 12-gauge electro-galvanized steel
• Weight 1.5 lbs
• Two (2) manufactured mounting points
• Packaged individually
• Not powder coated
858.222.6430
888.465.6266
www.holocom.com
customerservice@hol ocom.com
33
LOCK KIT
PRODUCT CODE
SLC-LK-KIT
PRODUCT CODE
SLC-CT-EE6
The Secure Large Carrier™ End-To-End Connector securely
joins two sections of Secure Large Carrier™ TopCap, or
Secure Large Carrier™ Connector (SLC-CT-90i /SLC-CT-90e)
cover and TopCap.
• 16-gauge electro-galvanized steel
• Weight: 1 lb
• Packaged individually
• Powder Coat Finish: White Textured
P U L L B OX 0
PRODUCT CODE
SLC-WM-PBO-H1
TOPCAP STARTER
5.6
12.4
8.0
BLANKFLANGELEFT/RIGH T
www.holocom.com
customerservice@holocom.com
The versatile PB0 allows Secure Large Carrier™ (SLC) to cross
hallways, transition from a comm room, and transition to SDS
Raceway and Secure Mini Dukt™ (SMD) Tube. It has an integrated
Interface Sleeve (INF) on each side for SLC Raceway, and two
TopCap starter pieces for installing the SLC Lock Kit. The INF
assembly is easily removed if unused, and right/left replacement
Blank Flanges are included. The PB0 allows SDS Raceway and
SMD Tube to exit through the front on either side of the door
opening as well as through the top, bottom, or sides (with Blank
Flange). Tamper resistant door has internal spring hinge and proprietary back flange and is identical to the User Drop Box doors.
• Height 8” x Width 12.4” x Depth 5.6”
• 16-gauge electro-galvanized steel
• Two (2) integrated Interface Sleeves (SLC)
• Single drop-down door with internal spring hinge and
hasp for Sargeant & Greenleaf ® padlock
• Includes two (2) Blank Flanges, left and right
• Includes two (2) TopCap Starter pieces
• Total weight: 11.5 lbs
• Powder Coat Finish: White Textured
858.222.6430
888.465.6266
C ARRIER™
END-TO-END CONNECTOR
L A R G E
• 16-gauge electro-galvanized steel
• Components:
- Raceway Lock Connector
- Lock Body Assembly with 30” lanyard
• Total Weight: 1 lb
• Powder Coat Finish: White Textured (Lock Connector)
S E C U R E
The Secure Large Carrier™ Lock Kit uses the same patented
locking technology used with Holocom 2” x 2” Secure
Raceway. The Lock Kit consists of two parts: Raceway Lock
Connector and Lock Body Assembly. When in “lock-down”
position, the entire raceway is secure and the enclosed cables
are protected. Releasing the lock enables the raceway to
undergo moves, adds, and changes (MACs).
34
90º INTERNAL CONNECTOR
SECURE
L A R G E
C A R R I E R ™
PRODUCT CODE
SLC-CT-90i
The two-piece Secure Large Carrier™ 90° Internal Connector
allows Secure Large Carrier™ Raceway to perform a rightangle turn on an inside corner. The 90° Internal Connector has
the same height/width dimensions as Secure Large Carrier™
Raceway/TopCap and sits inside the Mounting Bracket for
easy installation. Two (2) manufactured mounting points align
with mounting points on the Mounting Bracket for simplified,
labor-saving installation. A 3” bend radius allows smooth
cable movement across the connector.
• 16-gauge electro-galvanized steel
• Two-piece construction
• 3” bend radius allows smooth cable movement
• Weight: 4 lbs
• Two (2) labor-saving manufactured mounting points,
one at each end
• Powder Coat Finish: White Textured
90º EXTERNAL CONNECTOR
PRODUCT CODE
SLC-CT-90e
The two-piece Secure Large Carrier™ 90° External Connector
allows Secure Large Carrier™ Raceway to perform a right-angle
turn on an outside corner. The 90° External Connector has
the same height/width dimensions as Secure Large Carrier™
Raceway/TopCap and sits inside the Mounting Bracket for
easy installation. Two (2) manufactured mounting points align
with mounting points on the Mounting Bracket for simplified,
labor-saving installation. A 3” bend radius allows smooth cable
movement across the connector.
• 16-gauge electro-galvanized steel
• Two-piece construction
• 3” bend radius allows smooth cable movement
• Weight: 4.75 lbs
• Two (2) labor-saving manufactured mounting points,
one at each end
• Powder Coat Finish: White Textured
RUN END CONNECTOR LEFT
RUN END CONNECTOR RIGHT
PRODUCT CODE
SLC-CT-REC-LT
SLC-CT-REC-RT
The Secure Large Carrier™ Run End Connector Left/Right with
welded end cap is used to end a run of Secure Large Carrier™
Raceway. Two (2) manufactured mounting points allow simplified,
labor-saving installation. The upper mounting point aligns
with the mounting point on the end of adjoining raceway. Four
(4) integrated one-inch spacers stand the connector and
raceway off the wall. The Run End Connector also allows a
transition to a 1” Through-Wall Kit. Use the Run End Connector
Left (SLC-CT-REC-LT) for raceway runs that end to the left. Use
the Run End Connector Right (SLC-CT-REC-RT) for raceway
runs that end to the right.
• 16-gauge electro-galvanized steel
• Two (2) manufactured mounting points
• Four (4) integrated one-inch spacers allow 360° inspection
• Packaged individually
• Weight: 2.75 lbs
• Powder Coat Finish: White Textured Kit.
858.222.6430
888.465.6266
LEFT
RIGHT
www.holocom.com
customerservice@hol ocom.com
35
THROUGH-WALL RUN END CONNECTOR
PRODUCT CODE
SLC-TWK-REC-LT
SLC-TWK-REC-RT
RIGHT
2"NPTCOUPLER
PRODUCT CODE
SLC-TWK-TP
The Secure Large Carrier™ Through-Wall Trim Plate Kit covers
the hole made when installing a section of Secure Large
Carrier™ Raceway through a wall. The two-piece Trim Plate Kit
covers the hole on both sides of the wall.
• 16-gauge electro-galvanized steel
• Weight 1.5 lbs
• Packaged with two (2) trim plates per kit
• Powder Coat Finish: White Textured
SMD DROP CONNECTOR
PRODUCT CODE
SLC-SMD-DP
The Secure Large Carrier™ to Secure Mini Dukt™ Drop Connector provides the transition between Secure Large Carrier™
Raceway and Secure Mini Dukt™, usually leading to a User
Drop Box. Installation requires two (2) Mounting Brackets
(SLC-WM-MB), two (2) Secure Raceway Joints (SLC-RW-SRJ),
and TopCap from the SLC Raceway Kit (SLC-WM-RCW-ST-20).
Two (2) manufactured mounting points align with the Mounting
Brackets allowing simplified, labor-saving installation and a
one-inch standoff.
• 16-gauge electro-galvanized steel on SLC component
• 18-gauge electro-galvanized steel on SMD component
• Two (2) manufactured mounting points 1.5” from each end
• Weight 2.5 lbs
• Powder Coat Finish: White Textured
www.holocom.com
customerservice@holocom.com
858.222.6430
888.465.6266
C ARRIER™
T H R O U G H - W A L L T R I M P L AT E K I T
L A R G E
2"NPTCOUPLER
S E C U R E
LEFT
The dual function Secure Large Carrier™ Through-Wall Run End
Connector provides a solution for ending a section of Secure Large
Carrier™ (SLC) Raceway within a hallway or room and offers an integrated 2” through-wall to transition to 2”x 2” Secure Raceway or other
Holocom PDS component. Two manufactured mounting points allow
simplified, labor-saving installation. The upper mounting point aligns
with the mounting point on the end of the adjoining SLC Raceway.
Four (4) integrated one-inch spacers stand the connector and raceway
off the wall and allow 360° inspection. Use in conjunction with SLC
Secure Raceway Joint (SLC-RW-SRJ) and #2 Through-Wall Kit (SDSTW-002-12/24). Use the Left Connector for raceway runs that end to the
left. Use the Right Connector for raceway runs that end to the right.
• 16-gauge electro-galvanized steel
• One 2” NPT coupler supplied with each connector
• Two (2) manufactured mounting points
• Four (4) integrated one-inch spacers
• Use with Secure Raceway Joint (SLC-RW-SRJ) and #2 Through Wall Kit (SDS-TW-002-12/24) • Packaged and sold individually
• Weight 3.9 lbs
• Powder Coat Finish: White Textured
36
R E T R O F I T I N T E R FA C E S L E E V E
L A R G E
C A R R I E R ™
PRODUCT CODE
SLC-RTF-INF-LT
SLC-RTF-INF-RT
The Retrofit Interface Sleeve fits any secure enclosure with
a depth of six (6) inches or greater and was designed for
installation scenarios when the Secure Large Carrier Pull Box 0
(SLC-WM-PB0-H1) is too small for the amount of cabling. The
Retrofit Interface Sleeve provides an exit for secure network
cables from either the left or right side of the enclosure.
A paper installation template is supplied with the Retrofit Interface Sleeve ensuring accurate positioning on the enclosure.
Additional copies of the template are available at:
http://holocom.com/pdfs/SLC-RTF-INF-TEMPLATE.pdf
• 16-gauge electro-galvanized steel
• Fits secure enclosures with a depth of six (6) inches or greater
• Supplied with paper installation template
• Sold individually as SLC-RTF-INF-LT or SLC-RTF-INF-RT
• Weight 1.5 lbs
• Powder Coat Finish: White Textured
LEFT
RIGHT
SECURE
NOTES:
858.222.6430
888.465.6266
www.holocom.com
customerservice@hol ocom.com
37
NOTES:
S E C U R E
L A R G E
C ARRIER™
www.holocom.com
customerservice@holocom.com
858.222.6430
888.465.6266
ABOUT HOLOCOM
Holocom is the only manufacturer to offer all four Protective Distribution Systems (PDS)
solutions approved for SIPRNet and other classified networks:
•
•
•
•
Holocom PDS – the industry de facto standard hardened carrier
Holocom PDS plus alarm for fiber & copper networks
Alarm plus interlocking armored fiber cable
Retrofit alarm for non-compliant PDS
Holocom’s complete PDS product offering enables customers to meet site and security
requirements and conform to the specifications outlined in NSTISSI 7003 and the individual
service branch documents.
To ll F r ee:
888.465.6266
|
www.holocom.com
| customerservice@holocom.com
HEADQUARTERS
8360 Camino Santa Fe
Suite F
San Diego, CA 92121
Tel: 858.222.6430
Fax: 858.222.6431
Holocom products protected by US Pats. D619,097; D632,763; D580,871; 7,608,780; 7,661,375; 7,183,488;
7,115,814; 7,053,303; 7,049,517; 6,838,616; 5,831,211 and Pats pending. Made in the U.S.A. Holocom and
the Holocom logo are registered trademarks of Holocom, Inc. Other noted marks are trademarks of
their respective companies.
© 2013 Holocom, Inc. All Rights Reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising