250G LC - John Deere
250G LC
142 kW (191 hp)
250G LC
Engine
Manufacturer and Model
Non-Road Emissions Standard
Net Peak Power (ISO 9249)
Cylinders
Displacement
Off-Level Capacity
Aspiration
250G LC
Base engine for use in U.S., U.S.
Territories, and Canada
John Deere PowerTech™ PVX 6.8 L
EPA Interim Tier 4/EU Stage IIIB
142 kW (191 hp) at 2,000 rpm
6
6.8 L (415 cu. in.)
70% (35 deg.)
Turbocharged, air-to-air charge-air
cooler
Optional engine for use outside the
U.S. and U.S. Territories
John Deere PowerTech™ Plus 6.8 L
EPA Tier 3/EU Stage IIIA
132 kW (177 hp) at 2,000 rpm
6
6.8 L (415 cu. in.)
70% (35 deg.)
Turbocharged, air-to-air charge-air
cooler
Cooling
Cool-on-demand hydraulic-driven, suction-type fan with remote-mounted drive
Powertrain
2-speed propel with automatic shift
Maximum Travel Speed
Low
3.3 km/h (2.1 mph)
High
5.5 km/h (3.4 mph)
Drawbar Pull
22 650 kg (49,935 lb.)
Hydraulics
Open center, load sensing
Main Pumps
2 variable-displacement pumps
Maximum Rated Flow
224 L/m (59.2 gpm) x 2
Pilot Pump
One gear
Maximum Rated Flow
34 L/m (8.9 gpm)
Pressure Setting
3900 kPa (566 psi)
System Operating Pressure
Circuits
Implement
34 300 kPa (4,975 psi)
Travel
35 000 kPa (5,076 psi)
Swing
33 300 kPa (4,830 psi)
Power Boost
38 000 kPa (5,511 psi)
Controls
Pilot levers, short stroke, low-effort hydraulic pilot controls with shutoff lever
Cylinders
Bore
Rod Diameter
Boom (2)
124 mm (4.9 in.)
89 mm (3.5 in.)
Arm (1)
140 mm (5.5 in.)
99 mm (3.9 in.)
Bucket (1)
130 mm (5.1 in.)
89 mm (3.5 in.)
Electrical
Number of Batteries (12 volt)
2
Battery Capacity
1,400 CCA
Alternator Rating
130 amp
Work Lights
2 halogen (one mounted on boom, one on frame)
Undercarriage
Rollers (each side)
Carrier
2
Track
9
Shoes, Triple Semi-Grousers (each side) 51
Track
Adjustment
Hydraulic
Guides
2 per side
Chain
Sealed and lubricated
2
3
Optional engine for use outside the
U.S., U.S. Territories, and Canada
John Deere PowerTech™ 6.8 L
EPA Tier 2/EPA Stage II
132 kW (177 hp) at 2,000 rpm
6
6.8 L (415 cu. in.)
70% (35 deg.)
Turbocharged, air-to-air charge-air
cooler
Stroke
1389 mm (54.7 in.)
1610 mm (63.4 in.)
1074 mm (42.3 in.)
CENTERLINE OF SWING
Ground Pressure
250G LC
700-mm (28 in.) Triple Semi-Grouser Shoes 41.8 kPa (6.06 psi)
800-mm (32 in.) Triple Semi-Grouser Shoes 37.0 kPa (5.37 psi)
Swing Mechanism
Speed
13.5 rpm
Torque
74 376 Nm (54,857 lb.-ft.)
Serviceability
Refill Capacities
Fuel Tank
500 L (132 gal.)
Cooling System
23 L (6 gal.)
Engine Oil with Filter
19.5 L (5.2 gal.)
Hydraulic Tank
147.6 L (39 gal.)
Hydraulic System
240 L (63 gal.)
Swing Drive
7 L (7.5 qt.)
Gearbox
Propel (each)
6.2 L (6.5 qt.)
Pump Drive
1.1 L (1.2 qt.)
Operating Weights
With full fuel tank; 79-kg (175 lb.) operator; 1.06-m3 (1.38 cu. yd.), 1065-mm (42 in.), 997-kg (2,197 lb.) bucket; 3.61-m (11 ft. 10 in.) arm; 5112-kg (11,270 lb.) counterweight; and 800-mm (32 in.) triple semi-grouser shoes
Operating Weight
25 281 kg (55,736 lb.)
Component Weights
Undercarriage with Triple Semi Grouser Shoes
700 mm (28 in.)
8467 kg (18,667 lb.)
800 mm (32 in.)
8752 kg (19,294 lb.)
One-Piece Boom (with arm cylinder)
2210 kg (4,872 lb.)
Arm with Bucket Cylinder and Linkage
2.96 m (9 ft. 9 in.)
1296 kg (2,858 lb.)
3.61 m (11 ft. 10 in.)
1396 kg (3,078 lb.)
Boom-Lift Cylinders (2), Total Weight 434 kg (958 lb.)
1.06-m3 (1.38 cu. yd.), 1065-mm (42 in.) 997 kg (2,197 lb.)
Heavy-Duty Plate-Lip Bucket
Counterweight, Standard
5112 kg (11,270 lb.)
Operating Dimensions
Arm Length
2.96 m (9 ft. 9 in.)
3.61 m (11 ft. 10 in.)
Arm Digging Force
SAE
129.1 kN (29,021 lb.)
112.2 kN (25,220 lb.)
ISO
131.0 kN (29,450 lb.)
114.0 kN (25,628 lb.)
E
Bucket Digging Force
SAE
175.9 kN (39,552 lb.)
175.9 kN (39,552 lb.)
ISO
189.0 kN (42,489 lb.)
189.0 kN (42,489 lb.)
Lifting Capacity Over Front at Ground 8455 kg (18,639 lb.)
8381 kg (18,478 lb.)
Level 6.1-m (20 ft.) Reach (with power
boost)
C D
A
Maximum Reach
10.29 m (33 ft. 9 in.)
10.91 m (35 ft. 10 in.)
A| Maximum Reach at Ground Level
10.11 m (33 ft. 2 in.)
10.75 m (35 ft. 3 in.)
B
Maximum Digging Depth
6.96 m (22 ft. 10 in.)
7.61 m (25 ft. 0 in.)
B| Maximum Digging Depth at 2.44-m 6.75 m (22 ft. 2 in.)
7.44 m (24 ft. 5 in.)
(8 ft. 0 in.) Flat Bottom
C
Maximum Cutting Height
10.16 m (33 ft. 4 in.)
10.56 m (34 ft. 8 in.)
D
Maximum Dumping Height
7.20 m (23 ft. 7 in.)
7.58 m (24 ft. 10 in.)
GROUND LINE
E
Minimum Swing Radius
3.44 m (11 ft. 3 in.)
3.43 m (11 ft. 3 in.)
G
A'
F
Maximum Vertical Wall
6.03 m (19 ft. 9 in.)
6.74 m (22 ft. 1 in.)
A
G
Tail-Swing Radius
2.94 m (10 ft. 4 in.)
3.14 m (10 ft. 4 in.)
B B'
F
Machine Dimensions
A Overall Length
2.96 m (9 ft. 9 in.)
3.61 m (11 ft. 10 in.)
B Overall Height
2.96 m (9 ft. 9 in.)
3.61 m (11 ft. 10 in.)
C Rear-End Length/Swing Radius
D Distance Between Idler/Sprocket
Centerline
E Undercarriage Length
F Counterweight Clearance
G Upperstructure Width
H Cab Height
I Track Width with Triple SemiGrouser Shoes
J Gauge Width
K Ground Clearance
L Overall Width with Triple SemiGrouser Shoes
700 mm (28 in.)
800 mm (32 in.)
250G LC
10.35 m (34 ft. 0 in.)
10.41 m (34 ft. 2 in.)
3.07 m (10 ft. 1 in.)
3.14 m (10 ft. 4 in.)
3.14 m (10 ft. 4 in.)
3.84 m (12 ft. 7 in.)
4.64 m (15 ft. 3 in.)
1.09 m (3 ft. 7 in.)
2.89 m (9 ft. 6 in.)
3.01 m (9 ft. 11 in.)
700 mm (28 in.) / 800 mm (32 in.)
2.59 m (8 ft. 6 in.)
0.46 m (18 in.)
3.29 m (10 ft. 10 in.)
3.39 m (11 ft. 3 in.)
G
C
H
F
B
K
J
L
D
E
I
A
Lift Capacities
Boldface type indicates hydraulically limited capacity; lightface type indicates stability-limited capacities, in kg (lb.). Ratings at bucket lift hook; machine equipped with 871-kg (1,920 lb.) bucket; standard gauge;
and situated on firm, uniform supporting surface. Total load includes weight of cables, hook, etc. Figures do not exceed 87 percent of hydraulic capacities or 75 percent of weight needed to tip machine. All lift
capacities are based on ISO 10567.
Load Point Height
1.5 m (5 ft.)
3.0 m (10 ft.)
4.5 m (15 ft.)
6.0 m (20 ft.)
7.5 m (25 ft.)
9.0 m (30 ft.)
Horizontal Distance from
Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side
Centerline of Rotation
With 2.96-m (9 ft. 9 in.) arm and 700-mm (28 in.) shoes
5126
5126
6.0 m (20 ft.)
(11,207)
(11,207)
7138
7138
5939
5939
5358
4155
4.5 m (15 ft.)
(15,343)
(15,343)
(12,881)
(12,881)
(11,712)
(8,903)
9529
9253
7053
5839
5900
4012
3.0 m (10 ft.)
(20,456)
(19,947)
(15,254)
(12,571)
(12,831)
(8,610)
11 578
8596
8135
5515
6109
3852
1.5 m (5 ft.)
(24,945)
(18,513)
(17,591)
(11,872)
(13,128)
(8,276)
12 543
8277
8576
5295
5973
3728
Ground Line
(27,129)
(17,798)
(18,423)
(11,393)
(12,839)
(8,013)
8446
8446
12 551
8201
8471
5203
5919
3679
–1.5 m (–5 ft.)
(19,259)
(19,259)
(27,188)
(17,622)
(18,196)
(11,192)
(12,733)
(7,916)
9964
9964
14 599
14 599
11 732
8282
8509
5237
–3.0 m (–10 ft.)
(22,420)
(22,420)
(33,304)
(33,304)
(25,372)
(17,803)
(18,290)
(11,275)
13 748
13 748
9758
8530
–4.5 m (–15 ft.)
(29,522)
(29,522)
(20,866)
(18,366)
4
5
Lift Capacities (continued)
250G LC
Boldface type indicates hydraulically limited capacity; lightface type indicates stability-limited capacities, in kg (lb.). Ratings at bucket lift hook; machine equipped with 871-kg (1,920 lb.) bucket; standard gauge; and
situated on firm, uniform supporting surface. Total load includes weight of cables, hook, etc. Figures do not exceed 87 percent of hydraulic capacities or 75 percent of weight needed to tip machine. All lift capacities
are based on ISO 10567.
Load Point Height
1.5 m (5 ft.)
3.0 m (10 ft.)
4.5 m (15 ft.)
6.0 m (20 ft.)
7.5 m (25 ft.)
9.0 m (30 ft.)
Horizontal Distance from
Over Front
Over Side
Over Front
Over Side
Over Front
Over Side
Over Front
Over Side
Over Front
Over Side
Over Front
Over Side
Centerline of Rotation
With 3.61-m (11 ft. 10 in.) arm and 700-mm (28 in.) shoes
4380
4380
4073
4073
6.0 m (20 ft.)
(9,584)
(9,584)
(8,643)
(8,643)
5228
5228
4823
4236
4.5 m (15 ft.)
(11,347)
(11,347)
(10,535)
(9,080)
8377
8377
6404
5954
5440
4066
3825
2875
3.0 m (10 ft.)
(17,995)
(17,995)
(13,856)
(12,814)
(11,830)
(8,728)
(7,436)
(6,140)
10 707
8785
7613
5589
6104
3877
4493
2792
1.5 m (5 ft.)
(23,066)
(18,917)
(16,465)
(12,027)
(13,196)
(8,327)
(8,810)
(5,971)
4492
4492
12 136
8327
8537
5314
5970
3720
4417
2721
Ground Line
(10,371)
(10,371)
(26,233)
(17,907)
(18,478)
(11,431)
(12,828)
(7,992)
(8,130)
(5,829)
4381
4381
7698
7698
12 576
8149
8438
5167
5872
3631
–1.5 m (–5 ft.)
(9,836)
(9,836)
(17,525)
(17,525)
(27,229)
(17,510)
(18,120)
(11,111)
(12,622)
(7,804)
8049
8049
12 146
12 146
12 165
8158
8413
5145
5876
3635
–3.0 m (–10 ft.)
(18,103)
(18,103)
(27,656)
(27,656)
(26,317)
(17,531)
(18,073)
(11,070)
(12,649)
(7,828)
12 636
12 636
15 638
15 638
10 774
8328
7773
5263
–4.5 m (–15 ft.)
(28,581)
(28,581)
(33,670)
(33,670)
(23,160)
(17,916)
(16,579)
(11,351)
With 2.96-m (9 ft. 9 in.) arm and 800-mm (32 in.) shoes
5126
5126
6.0 m (20 ft.)
(11,207)
(11,207)
7138
7138
5939
5939
5358
4203
4.5 m (15 ft.)
(15,343)
(15,343)
(12,881)
(12,881)
(11,712)
(9,007)
9529
9347
7053
5902
5900
4059
3.0 m (10 ft.)
(20,456)
(20,149)
(15,254)
(12,708)
(12,831)
(8,714)
11 578
8690
8135
5578
6182
3900
1.5 m (5 ft.)
(24,945)
(18,716)
(17,591)
(12,009)
(13,286)
(8,380)
12 543
8371
8676
5358
6046
3776
Ground Line
(27,129)
(18,001)
(18,639)
(11,530)
(12,998)
(8,116)
8446
8446
12 551
8295
8571
5266
5993
3727
–1.5 m (–5 ft.)
(19,259)
(19,259)
(27,188)
(17,825)
(18,413)
(11,329)
(12,891)
(8,019)
9964
9964
14 599
14 599
11 732
8376
8588
5300
–3.0 m (–10 ft.)
(22,420)
(22,420)
(33,304)
(33,304)
(25,372)
(18,005)
(18,506)
(11,412)
13 748
13 748
9758
8624
–4.5 m (–15 ft.)
(29,522)
(29,522)
(20,866)
(18,568)
With 3.61-m (11 ft. 10 in.) arm and 800-mm (32 in.) shoes
4380
4380
4073
4073
6.0 m (20 ft.)
(9,584)
(9,584)
(8,643)
(8,643)
5228
5228
4823
4284
4.5 m (15 ft.)
(11,347)
(11,347)
(10 535)
(9,184)
8377
6404
6018
5440
4114
3825
2914
8377
3.0 m (10 ft.)
(17,995)
(17,995)
(13,856)
(12,951)
(11,830)
(8,831)
(7,436)
(6,223)
10 707
8879
7613
5652
6104
3925
4503
2830
1.5 m (5 ft.)
(23,066)
(19,119)
(16,465)
(12,164)
(13,251)
(8,431)
(8,810)
(6,055)
4492
4492
12 136
8421
8537
5378
6043
3768
4438
2759
Ground Line
(10,371)
(10,371)
(26,233)
(18,109)
(18,478)
(11,568)
(12,986)
(8,095)
(8,130)
(5,912)
4381
4381
7698
7698
12 576
8243
8538
5230
5945
3679
–1.5 m (–5 ft.)
(9836)
(9836)
(17,525)
(17,525)
(27,229)
(17,712)
(18,336)
(11,248)
(12,780)
(7,907)
8049
8049
12 146
12 146
12 165
8252
8513
5209
5950
3683
–3.0 m (–10 ft.)
(18,103)
(18,103)
(27,656)
(27,656)
(26,317)
(17,734)
(18,290)
(11,207)
(12,807)
(7,932)
12 636
12 636
15 638
15 638
10 774
8422
7773
5327
–4.5 m (–15 ft.)
(25,581)
(25,581)
(33,670)
(33,670)
(23,160)
(18,118)
(16,579)
(11,488)
Buckets
250G LC
A full line of buckets is offered to meet a wide variety of applications. Digging forces are with power boost. Tooth selection includes either the John Deere Fanggs™ Standard, Tiger, Twin Tiger, Abrasion panel,
or Flare tooth; or the ESCO Vertalok™ Standard, Twin Tiger, or Flare tooth. Replaceable cutting edges are available through John Deere Parts. Optional side cutters add 150 mm (6 in.) to bucket widths.
Type Bucket
Bucket Width
Bucket Capacity
Bucket Weight
Bucket Dig Force
Arm Dig Force
Arm Dig Force
Bucket Tip Radius
Number of Teeth
2.96 m (9 ft. 9 in.)
3.61 m (11 ft. 10 in.)
3
cu. yd.
kg
lb.
kN
lb.
kN
lb.
kN
lb.
mm
in.
mm
in.
m
Heavy Duty
1067
42
1.06
1.4
997
2,197
176.0
39,558
129.1
29,021
112.2
25,220
1435
56.5
5
Heavy Duty
1219
48
1.22
1.6
1071
2,361
176.0
39,558
129.1
29,021
112.2
25,220
1435
56.5
6
Heavy Duty
1372
54
1.39
1.8
1138
2,509
176.0
39,558
129.1
29,021
112.2
25,220
1435
56.5
6
Heavy Duty High
610
24
0.70
0.9
801
1,767
167.4 37,636
124.7
28,044
108.9
24,477
1588
62.5
3
Capacity
Heavy Duty High
760
30
0.92
1.2
913 2,012
167.4 37,636
124.7
28,044
108.9
24,477
1588
62.5
4
Capacity
Heavy Duty High
914
36
1.13
1.5
968 2,135
167.4
37,636
124.7
28,044
108.9
24,477
1588
62.5
4
Capacity
Heavy Duty High
1065
42
1.34
1.7
1035
2,281
167.4
37,636
124.7
28,044
108.9 24,477
1588
62.5
5
Capacity
Heavy Duty High
1220
48
1.55
2.0
1137 2,507
167.4
37,636
124.7
28,044
108.9
24,477
1588
62.5
6
Capacity
Ditching
1525
60
3.00
3.9
709 1,563
211.4
47,534
136.6
30,705
117.8
26,485
1194
47.0
0
6
7
Bucket Selection Guide*
250G LC
BUCKET SIZE m3 (cu. yd.)
3.0
(4.0)
2.7
(3.5)
2.3
(3.0)
Deere 2.96-m (9 ft. 9 in.) Arm
1.9
(2.5)
1.5
(2.0)
Deere 3.61-m (11 ft. 10 in.) Arm
1.0
(1.5)
0.8
(1.0)
1800
1900
3,400
2000
3,600
2100
Wet Sand, Gravel
Moist Sand
Wet Clay, Granite
3,200
3,000
1700
Wet Sand
2,800
1600
Wet Earth
Limestone
1500
Dry Clay
Shale
2,600
2,400
1400
Dry Sand
2,200
1300
Caliche
Coal
Topsoil
Wet Peat
lb./cu. yd. 1,200 1,400 1,600 1,800 2,000
kg/m3 700 800 900 1000 1100 1200
*Contact your John Deere dealer for optimum bucket and attachment selections. These recommendations are for general conditions and average use. Does not include optional
equipment such as thumbs or couplers. Larger buckets may be possible when using light materials, for flat and level operations, less compacted materials, and volume loading
applications such as mass-excavation applications in ideal conditions. Smaller buckets are recommended for adverse conditions such as off-level applications, rocks, and uneven
surfaces. Bucket capacity indicated is SAE heaped.
Additional equipment
Key: l Standard s Optional or special 250G
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
s
s
s
s
l
l
l
l
l
l
l
s
s
s
s
s
s
l
l
l
l
l
l
l
s
s
Engine
Auto-idle system
Automatic belt-tension device
Batteries (2 – 12 volt)
Coolant recovery tank
Dual-element dry-type air filter
Electronic engine control
Enclosed fan guard (conforms to SAE J1308)
Engine coolant to –37 deg. C (–34 deg. F)
Programmable auto shutdown
Fuel filter with water separator
Full-flow oil filter
Turbocharger with charge air cooler
Cool-on-demand hydraulic-driven fan
Glow-plug start aid
500-hour engine-oil-change interval
70% (35 deg.) off-level capability
Engine-oil-sampling valve
Hydraulic fan reverser
Chrome exhaust stack
Engine coolant heater
Severe-duty fuel filter
Hydraulic System
Reduced-drift valve for boom down, arm in
Auxiliary hydraulic valve section
Spring-applied, hydraulically released automatic
swing brake
Auxiliary hydraulic-flow adjustments through
monitor
Auto power lift
5,000-hour hydraulic-oil-change interval
Hydraulic-oil-sampling valve
Auxiliary hydraulic lines
Auxiliary pilot and electric controls
Hydraulic filter restriction indicator kit
Load-lowering control / Anti-drift device
Single-pedal propel control
Control pattern change valve
Undercarriage
Planetary drive with axial piston motors
Propel motor shields
Spring-applied, hydraulically released automatic
propel brake
Track guides, front idler and center
2-speed propel with automatic shift
Upper carrier rollers (2)
Sealed and lubricated track chain
Triple semi-grouser shoes, 700 mm (28 in.)
Triple semi-grouser shoes, 800 mm (32 in.)
250G Upperstructure
l Right-hand, left-hand, and counterweight
mirrors
l Vandal locks with ignition key: Cab door /
Service doors / Toolbox
l Debris-screening side panel
l Remote-mounted engine oil and fuel filters
Front Attachments
l Centralized lubrication system
l Dirt seals on all bucket pins
l Less boom and arm
l Oil-impregnated bushings
l Reinforced resin thrust plates
l Tungsten carbide thermal coating on arm-tobucket joint
s Arm, 2.96 m (9 ft. 9 in.)
s Arm, 3.61 m (11 ft. 10 in.)
s Attachment quick-couplers
s Boom cylinder with plumbing to mainframe
for less boom and arm
s Buckets: Heavy duty / Heavy-duty high capacity /
Side cutters and teeth
s “D” channel guard
s Material clamps
s Super-long fronts
Operator’s Station
l Adjustable independent-control positions
(levers-to-seat, seat-to-pedals)
l AM/FM radio
l Auto climate control/air conditioner/heater/
pressurizer
l Built-in Operator’s Manual storage compartment and manual
l Cell-phone power outlet, 12 volt, 60 watt,
5 amp
l Coat hook
l Deluxe suspension cloth seat with 100-mm
(4 in.) adjustable armrests
l Floor mat
l Front windshield wiper with intermittent speeds
l Gauges (illuminated): Engine coolant / Fuel
l Horn, electric
l Hourmeter, electric
l Hydraulic shutoff lever, all controls
l Hydraulic warm-up control
l Interior light
See your John Deere dealer for further information.
250G
l
l
l
l
l
l
l
l
l
l
l
l
s
s
s
s
s
s
l
l
l
l
s
l
s
Operator’s Station (continued)
Large cup holder
Machine Information Center (MIC)
Mode selectors (illuminated): Power modes – 3 /
Travel modes – 2 with automatic shift / Work
mode – one
Multifunction, color LCD monitor with: Diagnostic capability / Multiple-language capabilities / Maintenance tracking / Clock / Theftdeterrent system / System monitoring with
alarm features: Auto-idle indicator, engine
air cleaner restriction indicator light, engine
check, engine coolant temperature indicator
light with audible alarm, engine oil pressure
indicator light with audible alarm, low-alternator-charge indicator light, low-fuel indicator
light, fault code alert indicator, fuel-rate display,
wiper-mode indicator, work-lights-on indicator,
and work-mode indicator
Motion alarm with cancel switch (conforms to
SAE J994)
Power-boost switch on right console lever
Auxiliary hydraulic control switches in right
console lever
SAE 2-lever control pattern
Seat belt, 51 mm (2 in.), retractable
Tinted glass
Transparent tinted overhead hatch
Hot/cold beverage compartment
Air-suspension heated seat
24- to 12-volt D.C. radio convertors, 10 amp
Hydraulic oil filter restriction indicator light
Protection screens for cab front, rear, and side
Seat belt, 76 mm (3 in.), non-retractable
Window vandal-protection covers
Electrical
130-amp alternator
Blade-type multi-fused circuits
Positive-terminal battery covers
JDLink™ Ultimate wireless communication
system
Cab extension wiring harness
Lights
Work lights: Halogen / One mounted on boom /
One mounted on frame
2 lights mounted on cab / One mounted on
right side of boom
Net engine power is with standard equipment including air cleaner, exhaust system, alternator, and cooling fan, at test conditions specified per ISO 9249.
No derating is required up to 3050-m (10,000 ft.) altitude. Specifications and design subject to change without notice. Wherever applicable, specifications are
in accordance with SAE standards. Except where otherwise noted, these specifications are based on a unit with 1065-mm (42 in.) bucket, 800-mm (32 in.)
triple semi-grouser shoes, 5112-kg (11,270 lb.) counterweight, full fuel tank, and 79-kg (175 lb.) operator.
02-17-11
www.JohnDeere.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising