03092 Indexing plungers
03092 Indexing plungers
Item description/product images
Description
Material:
Steel version:
Indexing pin hardened:
grade 5.8.
Stainless steel version:
Indexing pin hardened:
Threaded sleeve 1.4305.
Indexing pin 1.4034.
Indexing pin not hardened:
Threaded sleeve 1.4305.
Indexing pin 1.4305.
Version:
Steel version:
Indexing pin hardened, ground, black oxidised.
Stainless steel version:
Indexing pin hardened, ground and bright.
Indexing pin not hardened, ground and bright.
Note:
Indexing plungers are used to prevent any change in locking position due to lateral
forces. A new locking position can only be set after the pin has been disengaged.
Special grips can be fitted on the projecting threaded pin. This pin is also suitable
for automatic actuation e.g. programme controlled pneumatic cylinder or by remote
control using bowden cables.
On request:
Special versions.
Drawings
© norelem
Worldwide:
Phone + 49 (0)7145-206-41 -44 /-45
www.norelem.com · info@norelem.de
1/2
03092 Indexing plungers
Overview of items
© norelem
Worldwide:
Phone + 49 (0)7145-206-41 -44 /-45
www.norelem.com · info@norelem.de
2/2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising