Microboil - TLC

Microboil - TLC
Boiling and Chilled Water
Microboil
Wall Mounted Boiling
Water Heater
3, 6, 8, 16 and 25 litre
p. 24
Usage
Provides instant near-boiling water for preparing
hot drinks in the workplace.
Features and Benefits
• Time saving – provides instant
hot water so no need to wait
for the kettle to boil
•Space saving – frees up
worktop space by eliminating
the need for a kettle
•Energy saving – no energy
wasted boiling more water
than is required
•Sophisticated electronics
maintain a constant supply
of hot water – even when the unit is automatically re-filling
after heavy usage
• Stylish and compact design
•Available in white or stainless
steel finish
• Simple to use and easy
to install
• Heavy duty catering style
chrome tap with lock-on option
•1 year on-site warranty
as standard
•3 year on-site warranty available
on request at additional cost
•For stainless steel models add
suffix ‘SS’ to the product code
e.g. MBS3SS
• It is highly recommended that
a filter system is fitted to protect
against scale build up. Units may
need to be de-scaled regularly.
Scale damage is not covered by
the warranty.
Product Code
Capacity
(litres)
Initial Draw Off
(Cups / Mugs)*
Heat Up Time
(mins)
MBS3
3
18 / 12
7
MBS6
6
38 / 25
14
MBS8
8
50 / 33
19
MBS16
16
100 / 66
38
MBS25
25
156 / 103
59
Boiling and Chilled Water
Plumbing
Must be installed by a suitably
qualified person.
Heating Element
2.4 kW, Incoloy-sheathed
type element
Minimum water pressure 1 bar.
Maximum water pressure
10.0 bar.
Thermostat
Electronic to control water
up to boiling point
Water Connection
Inlet/ Outlet 2 x 1/2” BSP male.
Fittings required (not supplied):
2 x 15mm compression to 1/2”
BSP female adapter.
1 x tundish recommended.
Water Tank
Copper
5 year corrosion guarantee
Electrical Connection
Installation must comply
with current IEE regulations.
Insulation
Polystyrene
Filter System
Optional extra
– highly recommended.
The product should be
connected to the fixed wiring
of the property via a double
pole fused spur with a minimum
break capacity of 13 amps.
See page 30 for filter options.
IP Rating
IPX0
Cable pre-wired (1.5m)
to the bottom left.
Recovery Rate
Recovery rate 150 cups per hour
for all models based on 167ml
cup size.
Installation
Install over a draining board,
or work top fitted with a drip tray.
At least 40mm clearance must be
left above the unit to allow later
removal of the jacket for service.
Maintenance
It is recommended the unit is
descaled every 6 months.
Approvals
CE, KIWA
Standard Warranty
1 year on-site warranty
as standard.
3 year on-site warranty
available at additional cost.
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight (kg)
Empty Full
MBS3
370
269
153
5.6
8.6
MBS6
420
312
171
7.2
14.8
MBS8
510
312
171
8.7
17.2
MBS16
545
364
218
10.8
28.8
MBS25
550
414
264
12.3
37.8
*Depth excludes the tap, for depth including tap add 90mm.
p. 25
Outer Casing
White powder coated steel
or stainless steel (SS)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising