HT7500ET SOME LIKE IT HOT
SOME LIKE IT HOT
HT7500ET
n Helios™ Additive reduces float current up to
75% enhancing high temperature life
n THT™ Plastic specifically formulated heat resistant
plastic case and cover optimizes compression
n Microcat® Catalyst lowers float current, mitigates
thermal buildup and cell dryout
n Exclusive IPF® Technology optimizes power
capacity, cell consistency, and long-term reliability
n TempX™ Alloy inhibits corrosion under the highest
temperature extremes
n Advanced AGM technology for superior high rate,
short term power
n Front access design for easy installation and maintenance
n Reinforced case resists bulging and meets safety
requirements (UL 94 V-0)
n Case & cover heat sealed and 100% tested to
prevent leaks
n Epoxy-sealed posts eliminate leaks
n Puncture resistant micro-porous glass mat separators
extend life
n Flame arresting, low pressure, self-sealing valves are
100% factory tested
n Computer-aided design and manufacturing control
processes and standards to ensure quality products
n All batteries meet or exceed IEEE recommended practices
n Battery design and construction meet UL recognition requirements
SPECIFICATIONS
Safety Vent:
Nominal Voltage: 12-Volt/750 w.p.c.
@ 15 min. rate to 1.67 v.p.c.
Float Voltage:
Positive Plate: Pure lead, low-calcium, high-tin alloy
Negative Plate: Lead calcium alloy
Battery Warranty:
Post Seal: Epoxy-sealed
Dimensions:
Terminal: Front access, 1/4" - 20 threaded insert
Container: Flame-retardant, UL 94 V-0/39% L.O.I.
Weight:
Catalyst: Microcat®
Low positive pressure,
self-sealing w/ flame arrestor
2.25 v.p.c. ± 0.01 v.p.c. (Range: 13.44
to 13.56 volts per 6-cell battery)
5 years in float applications at 95°F (35°C)
24.00" (609.6 mm) L
x 4.97" (126.3 mm) W
x 12.74" (323.5 mm) H
151 Ibs. (68.5 kg)
DISCHARGE RATINGS IN WATTS PER CELL @ 77°F (25°C) †
†
Volts Per Cell
(VPC)
5 MINS.
10 MINS.
15 MINS.
20 MINS.
30 MINS.
40 MINS.
50 MINS.
60 MINS.
1.60
1181
958
794
668
499
398
333
287
285
1.67
1086
891
750
641
488
393
330
1.70
1038
857
724
622
480
389
328
283
1.75
951
787
669
580
457
377
320
278
1.80
839
704
604
528
423
353
304
267
Subject to change without notice.
OPTIONAL FACTORY ACCEPTANCE TESTING
• More economical than performing a load test on site
• Confirms published capacity rating of product
• Establishes a factory baseline ohmic reading
• Formal test report provided
• Contact your East Penn Mfg. representative for additional information
TESTING SPECIFICTIONS
• Exceeds IEEE-1188 standards
• 15 minute battery rate to 1.67 vpc
• Constant current discharge
• String > 100% capacity — All individual batteries ≥ 95% capacity
• Conductance readings taken before the test
• Battery voltage recorded on report every 2.5 minutes
www.dekabatteries.com
East Penn Manufacturing Co. Lyon Station, PA 19536-0147 Phone: 610-682-3263 Fax: 610-682-0891 e-mail: reservepowersales@dekabatteries.com
E.P.M. Form No. 2173
10/15
© 2015 by EPM Printed in U.S.A.
All data subject to change without notice. No part of this document may be copied or
reproduced, electronically or mechanically, without written permission from the company.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising