romeo - Sig Sauer
ELECTRO-OPTICS
ROMEO™
ROMEO3™ 1x25mm MINIATURE REFLEX SIGHT
OWNERS MANUAL
TABLE OF CONTENTS
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Key Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Product Identification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Mounting The Sight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Sight Adjustments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
SIG SAUER® Electro-Optics Infinite Guarantee™. . . . . . . . . . . . . . . . .14
SIG SAUER Electronic Component Limited 5-Year Warranty. . . . . . . .15
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
This manual is available in the following languages: French, Spanish, German, Italian, Portuguese,
Russian, Afrikaans, Swedish, and Norwegian. Please visit sigoptics.com for Owners Manual downloads.
2
sigoptics.com
INTRODUCTION
The ROMEO3™ Reflex Sight is the ideal sighting solution for MSR/AR rifles, shotguns, carbines, submachine guns, or full size handguns. The ROMEO3 comes standard with a STANAG compliant M1913
Picatinny interface (some models include a QD 1.41” riser mount). The ROMEO3 Reflex Sight features a
high transmittance red notch reflector for excellent brightness, light transmittance and zero distortion.
A 3MOA Red Dot with multiple intensity settings ensures rapid target engagement under a full range of
lighting conditions.Featuring MOTAC™ (Motion Activated Illumination System) that powers up when it
senses motion and powers down when it does not providing optimum operational safety and enhanced
battery life. The readily available CR2032 battery is side-loading, allowing for quick battery replacement
without having to remove the sight from the firearm. The extremely strong and lightweight aircraft grade
aluminum housing ensures a lifetime of reliable service.
The ROMEO3 Reflex Sight includes lens cover, adjustment tool, battery and operating instructions. The
ROMEO3 is covered by SIG SAUER Electro-Optics Infinite Guarantee and SIG SAUER Electronic Component
Limited 5-Year Warranty.
3
CONTENTS:
• ROMEO3™ 1x25mm Miniature Reflex Sight
• CR2032 Battery (1)
• Sight Cover
• Mount (some sights will ship with multiple mounts)
• Lens cloth
• Hex Keys
4
sigoptics.com
KEY FEATURES:
• High transmittance red notch reflector for excellent brightness, light transmittance, and zero distortion
• 3 MOA Dot with multiple intensity settings for rapid target engagement under a full range of lighting
conditions
• MOTAC™ (Motion Activated Illumination System) powers up when it senses motion and powers down
when it does not
• Aircraft grade CNC Aluminum housing ensures a lifetime of reliable service
• Dependable waterproof (IPX-7 rated for complete water immersion up to 1 meter) and fogproof
performance
• SIG SAUER® Electro-Optics Infinite Guarantee™ and SIG SAUER Electronic Component Limited 5-Year
Warranty.
5
PRODUCT IDENTIFICATION:
A- Reticle Intensity Increase Button
B- Reticle Intensity Decrease Button
C- Battery Tray
D- Base Mount Screw
E- Windage Adjustment
F- Elevation Adjustment
G- Windage and Elevation Adjustment Lock Screw
H- Mount Screws
B
6
D
A
sigoptics.com
E
C G
H
F
H
7
W WARNING
Before working on your ROMEO3 sight always ensure that the firearm is unloaded with the safety on.
OPERATION
Installing the battery
The battery is located in a battery tray that can be accessed from the right side of the sight. Use a
flat object to open the tray (To avoid damaging the anodized surface, use a plastic object or an object
wrapped in electrical tape). Slide the tray out and replace the CR2032 battery positive side up. Slide the
tray back into its original closed position.
8
sigoptics.com
Turning Sight On and Off
• Turn the sight on by pressing either the p or q power selector button.
• To turn the sight off, press and hold either the p or q power selector button for 3 seconds.
• The sight also features MOTAC™. Causing it to automatically turn off after 90 seconds if no motion is
detected. As soon as the sight senses motion it will automatically power back on to the last setting.
• The ROMEO3 has 11 illumination settings, 9 daytime and 2 NV. To increase the intensity of your 3 MOA
dot press the p button on the left side of the sight. To decrease the intensity press the q button.
9
MOUNTING THE SIGHT
• Selecting your mount- Some models of ROMEO3 sights come with two
mounts, a low-rise mount or a QD 1.41” co-witness mount. In order
for the ROMEO3 to co-witness with your standard AR platform iron
sights you will need to use the QD 1.41” co-witness riser. Most other
applications will require the low-rise mount.
• Once you have selected the correct base for your sight you will need to
secure the sight to the base. This is done with two mounting screws at
the top of the sight. Align the sight on the base and tighten these two
screws to 1.5 Nm (15 in-lbs).
• The ROMEO3 was designed for use on most types of firearms that utilize
the MIL-STD 1913 Picatinny Rail. Because the ROMEO3 has infinite eye
relief, the sight can been mounted anywhere on the firearms rail system
forward or back. Make sure that there is access to the sights lock
screw at the rear of your sight. If using the low profile base tighten
down the ROMEO3 base to the MIL-STD 1913 rail 2 Nm (18 in-lbs).
• If using the QD 1.41” co-witness riser, tighten the mount by closing the
quick release lever and tightening the torx screw on the opposite side
to 2 Nm (18 in-lbs).
10
sigoptics.com
SIGHT ADJUSTMENTS
• You must always loosen the lock screw at the rear of your sight before
making windage or elevation adjustments. Loosen the lock screw by
turning it counter-clockwise
W CAUTION – Failure to loosen the lock screw before making changes
to your windage and elevation adjustments will damage the sight.
• Elevation adjustments – the elevation adjustments are on the top of
your sight. To raise your point of impact, with the provided Allen key,
turn the adjustment counter-clockwise. Each click is equal to 1 MOA.
To lower the point of impact turn the adjustment clockwise.
• Windage adjustments – the windage adjustments are on the right
11
side of your sight. To move your point of impact to the left, with the
provided hex key, turn the adjustment counter-clockwise. Each click
is equal to 1 MOA. To move the point of impact to the right turn the
adjustment clockwise.
• Locking your point of impact adjustments – make sure that you always
lock your windage and elevation adjustments. The lock screw is located
at the rear of the sight. Turn the lock screw clockwise until it reaches 1
Nm (9 in-lbs)
W CAUTION – Failure to lock the windage and elevation adjustments
will result in point of impact drift.
12
sigoptics.com
MAINTENANCE
• Cleaning – Keep your lenses clear by using a soft cloth or lens pen. The best way to maintain image
quality is by keeping your lenses clear of dirt and dust that cause scratches.
• Always use your sight cover to ensure that the sight optics remain scratch free.
• Replacing the battery- The battery is located in a battery tray that can be accessed from the right
side of the sight. Use a flat object to open the tray. Slide the tray out and replace the CR2032 battery
positive side up. Slide the tray back into its original closed position.
*Do not remove protective rubber material in upper right corner on the rear-facing surface of the sight.
This material is integral for waterproofing
TROUBLESHOOTING
POI changes between groups
• Check that all of your mounts are tightened to the correct torque spec
• Check that the windage and elevation adjustments are locked
• Check/Clean your firearm
• Check for variations in ammunition
13
FI
IN
N
I G
S A U
E
R
TE
E
S
N
IT
A
E GUAR
SIG SAUER Electro-Optics Infinite Guarantee™
SIG SAUER has manufactured the most rugged, dependable high-performance firearms
for over two centuries. Our heritage of design, engineering and precision-manufactured
quality predates the existence of any other optics company worldwide. We understand
the importance of quality in the line of fire, at the shooting range or on your next hunt.
SIG SAUER Electro-Optics had to earn the right to wear that badge and the Infinite
Guarantee has your back, forever. Period.
We will repair or replace your SIG SAUER product in the event it becomes damaged or defective, at no
charge to you. If we cannot repair your product, we will replace it with a product in perfect working order
of equal or better physical condition. It doesn’t matter how it happened, whose fault it was, or where you
purchased it.
SIG SAUER Infinite Guarantee™
• Unlimited Lifetime Guarantee
• Fully Transferable
• No Warranty Card Required
• No Receipt Required
• No Time Limit Applies
• No Charge
14
sigoptics.com
If you ever have a problem, no matter the cause, we promise to take care of you when it counts.
Please note that our Infinite Guarantee does not provide coverage for intentional damage, misuse,
cosmetic damage that does not affect the performance of the optic, loss, theft or unauthorized repair or
modification. Excludes electronic components.
TR
SIG SAUER Electronic Component Limited 5-Year Warranty
ONI C & TR
I
TY
LIM
IT
AN
EC
UM
EL
TI
For components not included under the SIG SAUER Infinite Guarantee, this warranty
covers any defects in materials and workmanship in the electronic components
of illuminated riflescopes/sights, electronic sights, flashlights, lasers, binoculars,
ED
RR
5 Y
spotting scopes and rangefinders. This warranty lasts for five years from the date
E AR WA
of manufacture. If, during that five-year period, these products are found to have
electronic component defects in materials or workmanship, SIG SAUER will repair your product, at no
charge to you. If we cannot repair your product, we will replace it with a product in perfect working order
of equal or better physical condition. This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
15
ROMEO3 SPECIFICATIONS
Magnification
Illumination Settings
1x25mm
9 Daytime / 2 NV
Window Height
.8 in / 21mm
Window Width
1.01 in / 25mm
Elevation Adjustment Range
Windage Adjustment Range
40 MOA
40 MOA
Weight
1.4 oz / 40 g
Battery
CR2032
Waterproofing
16
IPX7
sigoptics.com
C
B
D
A
A – 2.3 in / 58mm
B – 1.2 in / 30mm
C – 1.7 in / 42mm
D – 1.3 in / 33mm
17
NOTES:
18
sigoptics.com
19
FOR PRODUCT SERVICE ON THIS MODEL, PLEASE CALL 603-610-3000
19861 SW 95th Avenue, Portland, OR 97062 USA
P/N 7400217-01 R01
sigoptics.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising