Felsted® HP Cables Catalog
Felsted HP Cables Catalog
®
HP Cables
High Performance Control Cables
& Hardware
Push-Pull Cables
Universal Cables
Positive Lock Cables
Vernier Cables
Tension Cables
PTO Cables
Valve Control Cables
Hardware
Features & Construction
Core Constructions
Stranded Conduit
Seals & Boots
Hi-Performance (HP) 1 x 7 coated
core is available in 3, 4 and 6 series
cables. HP Core uses a proprietary
coating over 1 x 7 wire rope. This
construction offers improved flexibility,
higher push loads than armor core
construction. Solid stainless steel cores
are available in 3 Series push-pull,
universal, positive lock and PTO cables.
Tension cables use a 1 x 19 HP
coated core, while 8 series push-pull
remains armor core.
Multiple, oil tempered spring wires
are placed in a long lay pattern to
protect the liner and inner core,
maintain flexibility, and withstand
extreme compressive and tensile
loads. This long lay construction
results in minimal deflections during
cable operation, assuring precise
controlling action to the operator.
High-Performance seals are now
standard! Durable custom compounded seals are used to prevent
moisture and contaminants from
entering the cable. The new
Hi-Performance seals outperform
all previous seals, and are now
standard on all cables. The HP seals
operate in all temperature extremes,
while offering improved performance
and efficiency. Tension cables use a
durable tear-resistant silicone boot,
designed for high cycle use and high
temperature.
Liners
All Felsted brand cables utilize
polymer liners, available in standard HP
cable construction at –65 to +225°F
(–54 to +107°C), and HEFT 2 high
temperature version at –65 to +300°F
(–54 to +149°C). Factory lubrication
provides optimum core performance
without requiring further service.
Note: With quick disconnect control head
cables, though the conduit/core may be rated
to +225°F or +300°F, the control head itself is
not intended for these temperature ranges.
Conduit Jacket
Heavy duty, thick-walled polymer
jackets are extruded onto the stranded
liner for maximum cable strength.
Standard HP Cable material is polymer
molded to a dark maroon color. HEFT 2
jacket, used in high temperature
applications, uses a nylon based
material and is molded into a satin
black color.
End Fittings
Corrosion-resistant materials are used
throughout to provide maximum life.
Standard 3, 4 and 6 series rods and
sleeves are 300 series stainless steel,
while hubs are either stainless or
aluminum. The 8 series fittings are
plated steel.
Rod & Sleeve Bearing
An exclusive polymer rod and sleeve
bearing is used to improve efficiency,
sealing and cable life by preventing
metal-to-metal contact between the
rod and sleeve. They also accurately
align the rod with the seal to ensure
superior sealing and a long cable life.
For more information call
660.263.4377
Specifications subject to
change without notice
HP Core 1 x 7
Polymer Coated Wire
Long Lay Wires
Conduit Reinforcement
1
Conduit Jacket
Dark Maroon = HP Cable
Gloss Black = HEFT 2
Conduit Fitting/Hub
(Clamp Shown)
New HP Polymer
Sleeve Seal
Stainless Steel
Sleeve
Exclusive Rod
Bearing
Stainless Steel
Core Fitting/Rod
Rod Nut
New HP Rod Seal
Bearing and Seal
Catalog Index
Features & Construction ............................................................................................................................................................................. 1
Push-Pull Cables: 3, 4, 6 & 8 Series ................................................................................................................................................... 3
Universal Cables: 3 Series Light Duty (LD) .................................................................................................................................... 5
Knobs & T-Handles for Universal Cables......................................................................................................................................... 5
Universal Cables: 3 Series Heavy Duty (HD), 4 & 6 Series .................................................................................................. 7
Positive Lock Cables: 3 Series LD, 3 Series HD, 4 Series ..................................................................................................... 9
Vernier Cables: 3 Series LD, 3 Series HD, 4 Series ................................................................................................................11
Tension Cables: 3, 4, 6 & 8 Series .....................................................................................................................................................13
PTO & RVO Cables .........................................................................................................................................................................................14
RVC & Special Valve Control Cables...................................................................................................................................................15
Hardware.....................................................................................................................................................................................................16 –17
Specifications....................................................................................................................................................................................................18
Cable Types/Options/Part Number System
How to Order Felsted Brand HP Cables: Part Number System
Standard/Imperial
Example of a common Push-Pull Cable part number.
A standard HP Cable with no cable head, 4 Series, 3 inch travel, bulkhead hub, clamp hub and 120 inches in length.
Length
Inches
Control Head Options
(mm when M prefix
is used)
00None — Cable Without Head
73 Positive Lock Quick-Disconnect Head: 3” Travel
75 Positive Lock Quick-Disconnect Head: 5” Travel
90 Vernier Head: Small, Black, Quick-Disconnect
92 Vernier Head: Large, Black, Quick-Disconnect
Basic Cable Number
94 Vernier Head: Large, Black with Red Button, Quick-Disconnect
Cable Types
0
1
2
3
4
Solid Core (3 Series)
HP Cable Standard (Temperature –65 to +225°F/–54 to +107°C)
All Stainless Steel Fittings
HEFT 2 (High Temperature –65 to + 300°F/–54 to + 149°C)
HEFT 2 (High Temperature –65 to + 300°F/–54 to + 149°C)
With all Stainless Steel Fittings
(Choose from this catalog)
Push-Pull Cables: 3, 4, 6 & 8 Series ................................................. 3
Universal Cables: 3 Series Light Duty (LD) ....................................
Knobs & T-Handles for Universal Cables .........................................
Universal Cables: 3 Series Heavy Duty (HD), 4 & 6 Series ....
Positive Lock Cables: 3 Series LD, 3 Series HD, 4 Series ........
5
5
7
9
Vernier Cables: 3 Series LD, 3 Series HD, 4 Series .................. 11
Tension Cables: 3, 4, 6 & 8 Series ................................................. 13
PTO & RVO Cables ................................................................................. 14
RVC & Special Valve Control Cables ............................................... 15
Metric
See Above
See Above
Length – mm
Metric
”M” prefix designates metric threads on rods
and length in mm.
Felsted Brand Cable Products Are Available Through A Network Of Local F.A.S.T.® Cable Assemblers
www.orschelnproducts.com
2
Push-Pull HP Cables
8 SERIES
6 SERIES
4 SERIES
3 SERIES
Can be custom assembled by local F.A.S.T. distributors
3
Felsted Brand Cable Products Are Available Through A Network Of Local F.A.S.T.® Cable Assemblers
www.orschelnproducts.com
• Temperature Range: –65 to +225°F / –54 to +107°C Std.
–65 to +300°F / –54 to +149°C HEFT 2
• Low Backlash
• High Efficiency
3 SERIES
Specifications
HP Core
Travel
or Solid Core
Inch/(mm)
10-32 Thread
1.0
3” Bend Radii (HP) (25.4)
2.0
6” Bend Radii
(50.8)
3.0
(Solid Core)
(76.2)
4 SERIES
HP Core
1/4-28 Thread
5” Bend Radii
Building a Part Number
Operating Loads
Push
Pull
Lbs./(N)
Lbs./(N)
80
120
(356)
(534)
80
120
(356)
(534)
70
120
(311)
(534)
60
120
(267)
(534)
45
120
(200)
(534)
35
120
(155.8)
(534)
25
120
(111.3)
(534)
Specifications
Travel
Bulkhead End
Clamp End
DIM ”A”
DIM ”B”
DIM ”C”
DIM ”D”
Inch/(mm) Inch/(mm) Inch/(mm) Inch/(mm) Inch/(mm)
1.0
3.13
4.69
2.50
4.06
(25.4)
(79.5)
(119.1)
(63.5)
(103.1)
2.0
4.13
6.19
3.50
5.56
(50.8)
(104.9)
(157.2)
(88.9)
(141.2)
3.0
5.13
7.69
4.50
7.06
(76.2)
(130.3)
(195.3)
(114.3)
(179.3)
4.0
6.13
9.19
5.50
8.56
(101.6)
(155.7)
(233.4)
(139.7)
(217.4)
5.0
7.13
10.69
6.50
10.06
(127.0)
(181.1)
(271.5)
(165.1)
(255.5)
6.0
8.13
12.19
7.50
11.56
(152.4)
(206.5)
(309.6)
(190.5)
(293.6)
7.0
9.13
13.6
8.50
13.06
(177.8)
(231.9)
(347.7)
(215.9)
(331.7)
Operating Loads
Push
Pull
Lbs./(N)
Lbs./(N)
150
230
(667)
(1023)
150
230
(667)
(1023)
125
230
(556)
(1023)
100
230
(445)
(1023)
75
230
(334)
(1023)
55
230
(244.8)
(1023)
45
230
(200.3)
(1023)
Specifications
Travel
Bulkhead End
Clamp End
DIM ”A”
DIM ”B”
DIM ”C”
DIM ”D”
Inch/(mm) Inch/(mm) Inch/(mm) Inch/(mm) Inch/(mm)
1.0
3.25
5.00
2.56
4.31
(25.4)
(82.6)
(127.0)
(65.0)
(109.5)
2.0
4.25
6.50
3.56
5.81
(50.8)
(108.0)
(165.1)
(90.4)
(147.6)
3.0
5.25
8.00
4.56
7.31
(76.2)
(133.4)
(203.2)
(115.8)
(185.7)
4.0
6.25
9.50
5.56
8.81
(101.6)
(158.8)
(241.3)
(141.2)
(233.8)
5.0
725
11.00
6.56
10.31
(127.0)
(184.2)
(279.4)
(166.6)
(261.9)
6.0
8.25
12.50
7.56
11.81
(152.4)
(209.6)
(317.5)
(192.0)
(299.9)
7.0
9.25
14.00
8.56
13.31
(177.8)
(235)
(355.6)
(217.4)
(338.0)
8 SERIES
Armor Core
3/8-24 Thread
10” Bend Radii
4.0
(101.6)
5.0
(127.0)
6.0
(152.4)
7.0
(177.8)
Bulkhead End
Clamp End
DIM ”A”
DIM ”B”
DIM ”C”
DIM ”D”
Inch/(mm) Inch/(mm) Inch/(mm) Inch/(mm)
3.00
4.44
2.31
3.75
(76.2)
(112.8)
(58.7)
(95.3)
4.00
5.94
3.31
5.25
(101.6)
(150.9)
(84.1)
(133.4)
5.00
7.44
4.31
6.75
(127.0)
(189.0)
(109.5)
(171.5)
6.00
8.94
5.31
8.25
(152.4)
(227.1)
(134.9)
(209.6)
7.00
10.44
6.31
9.75
(177.8)
(265.2)
(160.3)
(247.7)
8.00
11.94
7.31
11.25
(203.2)
(303.3)
(185.6)
(285.7)
9.00
13.44
8.31
12.75
(228.6)
(341.4)
(211.0)
(323.8)
6 SERIES
HP Core
5/16-24 Thread
7” Bend Radii
• Conduit Color: Dark Maroon - HP Cable Std.
Satin Black - HEFT 2
Operating Loads
Push
Pull
Lbs./(N)
Lbs./(N)
250
400
(1112)
(1779)
250
400
(1112)
(1779)
210
400
(934)
(1779)
170
400
(756)
(1779)
130
400
(578)
(1779)
90
400
(400.5)
(1779)
60
400
(267)
(1779)
Specifications
Travel
Bulkhead End
Clamp End
DIM ”A”
DIM ”B”
DIM ”C”
DIM ”D”
Inch/(mm) Inch/(mm) Inch/(mm) Inch/(mm) Inch/(mm)
1.0
3.69
5.56
3.19
5.06
(25.4)
(93.7)
(141.2)
(81.0)
(128.5)
2.0
4.69
7.06
4.19
6.56
(50.8)
(119.1)
(179.3)
(106.4)
(166.6)
3.0
5.69
8.56
5.19
8.06
(76.2)
(144.5)
(217.4)
(131.8)
(204.7)
4.0
6.69
10.06
6.19
9.56
(101.6)
(169.9)
(255.5)
(157.2)
(242.8)
5.0
7.69
11.56
7.19
11.06
(127.0)
(195.3)
(293.6)
(182.6)
(280.9)
6.0
8.69
13.06
8.19
12.56
(152.4)
(220.7)
(331.7)
(208.0)
319.0)
7.0
9.69
14.56
9.19
14.06
(177.8)
(246.1)
(369.8)
(233.4)
(357.1)
Overall Length
In Inches
(mm when M
prefix is used)
Cable Series:
3,4,6
Cable Travel:
1,2,3,4,5,6,7
Conduit Fitting Type: **
Bulkhead - 2
Clamp - 3
Cable Type
0 Solid Core (3 Series Only)
1 Hi-Performance (Standard)
2 Marine
3 HEFT 2 (Hi-Performance & High Temperature)
4 Marine HEFT 2
Metric – see pg. 2
**B-C Combo Hubs = 5
Bulkhead and Clamp on same end.
To order a Bulkhead/Clamp
Combination cable, use digits ”55” in
the conduit fitting type boxes above.
Note: Clamp mounting dimensions are
the same as the clamp dimensions
shown on these pages. Bulkhead
mounting dimensions grow.
The B-C Combo hub is a flexible solution for applications where the exact hub fitting (clamp vs. bulkhead) is not known.
Building a Part Number
Operating Loads
Push
Pull
Lbs./(N)
Lbs./(N)
700
1000
(3114)
(4448)
700
1000
(3114)
(4448)
600
1000
(2669)
(4448)
500
1000
(2224)
(4448)
400
1000
(1779)
(4448)
275
1000
(1223.8)
(4448)
150
1000
(667.5)
(4448)
Overall Length
In Inches
(mm when M
prefix is used)
Cable Travel:
1,2,3,4,5,6,7
Conduit Fitting Type:
Bulkhead - 2
Clamp - 3
HEFT 2 Not available in 8 Series
Metric – see pg. 2
Felsted Brand Cable Products Are Available Through A Network Of Local F.A.S.T.® Cable Assemblers
www.orschelnproducts.com
4
Universal – Utility Cables
3 SERIES LIGHT DUTY
Can be custom assembled by local F.A.S.T. distributors
Choice of core type:
HP Core – Polymer coated 1 x 7
Solid .075 stainless steel core
Order handle/knob separately
Nonmetallic liners
Indicate desired knob or
handle on order. See above.
Specifications
Travel
DIM ”AA” DIM ”BB”
Inch/(mm) Inch/(mm) Inch/(mm)
3.0
4.50
5.0
(76.2)
(114.3)
(127.0)
5.0
6.50
8.0
(127.0)
(165.1)
(203.2)
Cable Only
Building a Part Number
Overall Length
Cable Travel:
3,5
Conduit Size:
0 = .31 dia. std.
2 = .26 dia.
(Available with
cable type 0,
solid core only)
In Inches
Conduit Fitting Type:
Plain = 0
Bulkhead = 2
Clamp = 3
Shoulder = 5
Handle Type/Legend I.D.
Cable Type
0 Solid Core (3 Series Only) .075 dia.
1 Hi-Performance (Standard)
3 HEFT 2 (Hi-Performance & High Temperature)
5
Felsted Brand Cable Products Are Available Through A Network Of Local F.A.S.T.® Cable Assemblers
www.orschelnproducts.com
Knobs
T-Handles
Tough Nylon Material
Rugged Phenolic Material
30412
30088
30024
30162
49005
Base Part # 49005-1
Type Color
A
Black
49005-2
B
Red
69005-1
C
Black
69005-2
D
Red
KNOBS
T-HANDLES
69005
Base Part # Type Color Legend I.D.
Thread Size
30024-0
E
Black
01
1
30088-1
F
Black
01
1
30088-2
G
Red
01
1
1
30162-0
H
Red
06
30387-1
I
Black
01
1
30387-2
J
Red
01
1
30412-0
K
Black
01
1
T-Handle /Knob Only
Building a Part Number
Base Part Number
30387
Refer to ”Buiding a Part Number” at bottom.
Knobs limited to above legend identification
and thread size combinations.
Universal, Utility, Positive Lock
Cable and Knob/T-Handle Assembly
Building a Part Number
Thread Size
1 1/4-20 UNC-2B
2 5/16-24 UNF-2B
3 3/8-24 UNF-2B
4 .358 hole with set screw
Legend Identification
01 Plain 11 Cold Start 19 Overdrive
02 Stop 12 Pump 20 Aux. Release
03 Shut-Off
13 Chute (Lock)
04 Throttle
14 Fire
21 Rear Door
05 Choke
15 Start (Lock)
06 PTO
16 Hood
22 Throttle
07 Emergency Stop 17 Emergency Fuel (Lock)
08 Engine Stop Shut-Off
23 Hatch
09 (Lock) (Lock)
10 Disconnect
Note: 01 Plain T-handle is a stock item. Other T-handles may have
minimum order quantities and special order long lead time.
Note: To order Positive Lock Spare Handle 49005-1094
w / set screw use part #30073.
Length
Cable
Type
0
1
2
3
(See pg. 2)
Type of
Handle /Knob
A
B
C
D
E
F
G
H
I
J
K
Legend I.D.
on Handle
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
19
20
21
22
23
Cable Base Number
33070
33080
35070
35080
03327
03328
04337
04338
06337
Felsted Brand Cable Products Are Available Through A Network Of Local F.A.S.T.® Cable Assemblers
www.orschelnproducts.com
6
Universal HP Cables
HEAVY DUTY 6 SERIES
HEAVY DUTY 4 SERIES
HEAVY DUTY 3 SERIES
Can be custom assembled by local F.A.S.T. distributors
7
Indicate desired knob or handle
on order. See pages 6 and 7.
Indicate desired knob or handle
on order. See pages 6 and 7.
Indicate desired knob or handle
on order. See pages 6 and 7.
Felsted Brand Cable Products Are Available Through A Network Of Local F.A.S.T.® Cable Assemblers
www.orschelnproducts.com
• Heavy Duty: 3, 4, 6 Series threaded end rods.
• Applications: throttle, choke, engine stop, fuel shut-off, latches.
• Temperature Range: –65 to +225°F / –54 to +107°C Std.
–65 to +300°F / –54 to +149°C HEFT 2
• Wide variety of Handles & Knobs
HEAVY DUTY 3 SERIES
Choice of Core Type
HP Core – polymer coated 1 x 7
Solid .075 stainless steel core
Specifications
Travel
DIM ”AA”
Inch/(mm) Inch/(mm)
1.0
4.50
(25.4)
(114.3)
2.0
4.50
(50.8)
(114.3)
3.0
4.50
(76.2)
(114.3)
4.0
6.50
(101.6)
(165.1)
5.0
6.50
(127.0)
(165.1)
Bulkhead End
DIM ”A”
DIM ”B”
Inch/(mm) Inch/(mm)
3.00
4.94
(76.2)
(125.5)
4.00
6.94
(101.6)
(176.3)
5.00
8.94
(127.0)
(227.1)
6.00
10.94
(152.4)
(227.9)
7.00
12.94
(177.8)
(328.7)
Clamp End
DIM ”C”
DIM ”D”
Inch/(mm) Inch/(mm)
2.31
4.25
(58.7)
(108.0)
3.31
6.25
(84.1)
(158.8)
4.31
8.25
(109.5)
(209.6)
5.31
10.25
(134.9)
(260.4)
6.31
12.25
(160.3)
(311.2)
Operating Loads
Push
Pull
Lbs./(N) Lbs./(N)
60
60
(267)
(267)
60
60
(267)
(267)
60
60
(267)
(267)
60
60
(267)
(267)
45
60
(200)
(267)
Building a Part Number
HEAVY DUTY 4 SERIES
HP Core
1/4 ” - 28 Threaded rod (output end)
Specifications
Travel
DIM ”AA”
Inch/(mm) Inch/(mm)
1.0
5.19
(25.4)
(131.8)
2.0
5.19
(50.8)
(131.8)
3.0
5.19
(76.2)
(131.8)
4.0
7.19
(101.6)
(182.6)
5.0
7.19
(127.0)
(182.6)
Bulkhead End
DIM ”A”
DIM ”B”
Inch/(mm) Inch/(mm)
3.13
5.19
(79.5)
(131.8)
4.13
7.19
(104.9)
(182.6)
5.13
9.19
(130.3)
(233.4)
6.13
11.19
(155.7)
(284.2)
7.13
13.19
(181.1)
(335.0)
Clamp End
DIM ”C”
DIM ”D”
Inch/(mm) Inch/(mm)
2.50
4.56
(63.5)
(115.8)
3.50
6.56
(88.9)
(166.6)
4.50
8.56
(114.3)
(217.4)
5.50
10.56
(139.7)
(268.2)
6.50
12.56
(165.1)
(319.0)
Operating Loads
Push
Pull
Lbs./(N) Lbs./(N)
120
120
(534)
(534)
120
120
(534)
(534)
120
120
(534)
(534)
100
120
(445)
(534)
75
120
(334)
(534)
Overall Length
In Inches
(mm when M
prefix is used)
Cable Series:
3,4,6
Cable Travel:
1,2,3,4,5
Conduit Fitting Type:
Bulkhead - 2
Clamp - 3
Handle Type/Legend I.D.
Cable Type
0 Solid Core (3 Series Only)
1 Hi-Performance (Standard)
3 HEFT 2 (Hi-Performance & High Temperature)
Metric – see pg. 2
HEAVY DUTY 6 SERIES
HP Core
5/16” - 28 Thread (output end)
Specifications
Travel
DIM ”AA”
Inch/(mm) Inch/(mm)
1.0
5.19
(25.4)
(131.8)
2.0
5.19
(50.8)
(131.8)
3.0
5.19
(76.2)
(131.8)
4.0
7.19
(101.6)
(182.6)
5.0
7.19
(127.0)
(182.6)
Bulkhead End
DIM ”A”
DIM ”B”
Inch/(mm) Inch/(mm)
3.25
5.50
(82.6)
(139.7)
4.25
7.50
(108.0)
(190.5)
5.25
9.50
(133.4)
(241.3)
6.25
11.50
(158.8)
(292.1)
7.25
13.50
(184.2)
(342.9)
Clamp End
DIM ”C”
DIM ”D”
Inch/(mm) Inch/(mm)
2.56
4.81
(65.0)
(122.2)
3.56
6.81
(90.4)
(173.0)
4.56
8.81
(115.8)
(223.8)
5.56
10.81
(141.2)
(274.6)
6.56
12.81
(166.6)
(325.4)
Operating Loads
Push
Pull
Lbs./(N) Lbs./(N)
225
225
(1001)
(1001)
225
225
(1001)
(1001)
210
225
(934)
(1001)
170
225
(756)
(1001)
130
225
(578)
(1001)
Felsted Brand Cable Products Are Available Through A Network Of Local F.A.S.T.® Cable Assemblers
www.orschelnproducts.com
8
Positive Lock HP Cables
4 SERIES
HEAVY DUTY 3 SERIES
LIGHT DUTY 3 SERIES
Factory assembled style: see page 11–12 for F.A.S.T. style
9
Felsted Brand Cable Products Are Available Through A Network Of Local F.A.S.T.® Cable Assemblers
www.orschelnproducts.com
• Light Duty: exposed Solid Core or 1 x 7 HP Core
HP Core: choose for best flexibility, lower backlash and higher efficiency. Polymer coated 1 x 7 wire rope.
Solid Core: .075 solid stainless steel core.
• Heavy Duty: 3 & 4 Series threaded end rods.
• Applications: throttle, choke, engine stop, fuel shut-off, latches.
• Temperature Range: –65 to +225°F / –54 to +107°C Std.
–65 to +300°F / –54 to +149°C HEFT 2
• T-Handle locks in either direction.
• Quick Disconnect Positive Lock Head: see verniers page 12.
• Replacement T-Handle: 49005-1094 with 30073 set screw.
LIGHT DUTY 3 SERIES
Choice of core type:
HP Core – Polymer coated 1 x 7
Solid .075 stainless steel core
Exposed core
Choice of 4 cable ends
Building a Part Number
Overall Length
Cable Travel:
3,5
In Inches
Specifications
Travel
Inch/(mm)
DIM ”AA”
Inch/(mm)
DIM ”BB”
Inch/(mm)
3.0
(76.2)
5.25
(133.4)
5.00
(127.0)
5.0
(127.0)
7.25
(184.2)
8.00
(203.2)
Conduit Size:
0 = .31 dia. std.
2 = .26 dia.
(Available with
cable type 0,
solid core only)
Conduit Fitting Type:
Plain = 0
Bulkhead = 2
Clamp = 3
Shoulder = 5
Cable Type
0 Solid Core (3 Series Only) .075 dia.
1 Hi-Performance (Standard)
3 HEFT 2 (Hi-Performance & High Temperature)
HEAVY DUTY 3 SERIES
Choice of core type:
HP Core - Polymer coated 1 x 7
Solid .075 stainless steel core
10-32 Threaded End Rod
Specifications
Travel
DIM ”AA”
Inch/(mm) Inch/(mm)
1.0
5.25
(25.4)
(133.4)
2.0
5.25
(50.8)
(133.4)
3.0
5.25
(76.2)
(133.4)
4.0
7.25
(101.6)
(184.2)
5.0
7.25
(127.0)
(184.2)
Bulkhead End
DIM ”A”
DIM ”B”
Inch/(mm) Inch/(mm)
3.00
4.94
(76.2)
(125.5)
4.00
6.94
(101.6)
(176.3)
5.00
8.94
(127.0)
(227.1)
6.00
10.94
(152.4)
(277.9)
7.00
12.94
(177.8)
(328.7)
Clamp End
DIM ”C”
DIM ”D”
Inch/(mm) Inch/(mm)
2.31
4.25
(58.7)
(108.0)
3.31
6.25
(84.1)
(158.8)
4.31
8.25
(109.5)
(209.6)
5.31
10.25
(134.9)
(260.4)
6.31
12.25
(160.3)
(311.2)
Building a Part Number
Operating Loads
Push
Pull
Lbs./(N) Lbs./(N)
60
60
(267)
(267)
60
60
(267)
(267)
60
60
(267)
(267)
60
60
(267)
(267)
45
60
(200)
(267)
Overall Length
In Inches
Cable Series:
3,4,6
Cable Travel:
1,2,3,4,5
Conduit Fitting Type:
Bulkhead - 2
Clamp - 3
4 SERIES
HP Core
1/4” - 28 Threaded Rod (output end)
Cable Type
0 Solid Core (3 Series Only)
1 Hi-Performance (Standard)
Specifications
Travel
DIM ”AA”
Inch/(mm) Inch/(mm)
1.0
5.25
(25.4)
(133.4)
2.0
5.25
(50.8)
(133.4)
3.0
5.25
(76.2)
(133.4)
4.0
7.25
(101.6)
(184.2)
5.0
7.25
(127.0)
(184.2)
3 HEFT 2 (Hi-Performance & High Temperature)
Bulkhead End
DIM ”A”
DIM ”B”
Inch/(mm) Inch/(mm)
3.13
5.19
(79.5)
(131.8)
4.13
7.19
(104.9)
(182.6)
5.13
9.19
(130.3)
(233.4)
6.13
11.19
(155.7)
(284.2)
7.13
13.19
(181.1)
(335.0)
Clamp End
DIM ”C”
DIM ”D”
Inch/(mm) Inch/(mm)
2.50
4.56
(63.5)
(115.8)
3.50
6.56
(88.9)
(166.6)
4.50
8.56
(114.3)
(217.4)
5.50
10.56
(139.7)
(268.2)
6.50
12.56
(165.1)
(319.0)
Operating Loads
Push
Pull
Lbs./(N) Lbs./(N)
120
120
(534)
(534)
120
120
(534)
(534)
120
120
(534)
(534)
100
120
(445)
(534)
75
120
(334)
(534)
Metric – see pg. 2
Felsted Brand Cable Products Are Available Through A Network Of Local F.A.S.T.® Cable Assemblers
www.orschelnproducts.com
10
Quick Disconnect HP Cables
Choice of core type:
HP Core – Polymer coated 1 x 7
Solid .075 stainless steel core
Choice of 4 cable ends
Exposed core
4 SERIES
HEAVY DUTY
3 SERIES
LIGHT DUTY 3 SERIES
Can be custom assembled by local F.A.S.T. distributors
11
Choice of core type:
HP Core – Polymer coated 1 x 7
Solid .075 stainless steel core
10-32 Threaded Rod (output end)
HEAD OPTIONS
SEE ABOVE
HP Core
1/4”-28 Threaded Rod
(output end)
HEAD OPTIONS
SEE ABOVE
Felsted Brand Cable Products Are Available Through A Network Of Local F.A.S.T.® Cable Assemblers
www.orschelnproducts.com
• Light Duty: exposed Solid Core or 1 x 7 HP Core.
HP Core: choose for best flexibility, lower backlash and higher efficiency. Polymer coated 1 x 7 wire rope.
Solid Core: .075 solid stainless steel core.
• Heavy Duty: 3 & 4 Series threaded end rods.
• Temperature Range: –65 to +225°F /–54 to +107°C Std.
–65 to +300°F / –54 to +149°C HEFT 2
• Applications: engine RPM, or where coarse or fine adjustments are needed.
Quick Disconnect Cable Heads
#73 Positive Lock Head – 3” Travel
#75 Positive Lock Head – 5” Travel
#90 Vernier–Small Knob
#92 Vernier–Black Center Button
#94 Vernier–Red Center Button
To Order
Vernier and Positive Lock cable control heads may be
ordered as a complete assembly (head and cable attached)
or separately. Order the desired control head using the twodigit number 90, 92, 94, 73 or 75. Order the cable using the
five-digit number from ”Building a Part Number.” To order
a complete assembly, combine the control head number
with the desired cable number. Example: if you desire
control head #94 and cable #33092, then combine to make
the assembly part number X94-33092-length.
Building a Part Number
Overall Length
In Inches
(mm when M prefix
is used)
Conduit Fitting Type:
Plain = 0
Head Type
Bulkhead = 2
00 None-Cable only
Clamp = 3
90 Vernier-Black Button - Black Knob
Shoulder = 5
92 Vernier-Black Button - Black Knob
94 Vernier-Red Button - Black Knob
73 Positive Lock - 3” Travel
Conduit Size:
75 Positive Lock - 5” Travel
0 = .31 dia. std.
2 = .26 dia. Cable Type
(Available with Cable
0 Solid Core (3 Series Only)
Type 0, Solid Core only)
1 Hi-Performance (Standard)
3 HEFT 2 (Hi-Performance
& High Temperature)
Load Rating: Maximum 20 lbs. is recommended.
Specifications
Building a Part Number
Travel
Bulkhead End
Clamp End
DIM ”A”
DIM ”B”
DIM ”C”
DIM ”D”
Inch/(mm) Inch/(mm) Inch/(mm) Inch/(mm) Inch/(mm)
1.0
3.00
4.94
2.31
4.25
(25.4)
(76.2)
(125.5)
(58.7)
(108.0)
2.0
4.00
6.94
3.31
6.25
(50.8)
(101.6)
(176.3)
(84.1)
(158.8)
3.0
5.00
8.94
4.31
8.25
(76.2)
(127.0)
(227.1)
(109.5)
(209.6)
Load Rating: Maximum 20 lbs. is recommended.
Cable Travel: 1, 2, 3
Specifications
Travel
Bulkhead End
Clamp End
DIM ”A”
DIM ”B”
DIM ”C”
DIM ”D”
Inch/(mm) Inch/(mm) Inch/(mm) Inch/(mm) Inch/(mm)
1.0
3.13
5.19
2.50
4.56
(25.4)
(79.5)
(131.8)
(63.5)
(115.8)
2.0
4.13
7.19
3.50
6.56
(50.8)
(104.9)
(182.6)
(88.9)
(166.6)
3.0
5.13
9.19
4.50
8.56
(76.2)
(130.3)
(233.4)
(114.3)
(217.4)
Load Rating: Maximum 20 lbs. is recommended.
Overall Length
In Inches
(mm when M
prefix is used)
Cable Series:
3, 4
Conduit Fitting Type:
Bulkhead = 2
Clamp = 3
Head Type
00 None–Cable only
90 Vernier–Black Button –Black Knob
92 Vernier–Black Button –Black Knob
94 Vernier–Red Button –Black Knob
73 Positive Lock – 3” Travel
75 Positive Lock – 5” Travel
Cable Type
0 Solid Core (3 Series Only)
1 Hi-Performance (Standard)
3 HEFT 2 (Hi-Performance & High Temperature)
Note: A 3 Series Light Duty Conduit is available.
(.26 O.D.) Part Number is 3329X-L.
Metric – see pg. 2
Felsted Brand Cable Products Are Available Through A Network Of Local F.A.S.T.® Cable Assemblers
www.orschelnproducts.com
12
Tension HP Cables
Can be custom assembled by local F.A.S.T. distributors
• Temperature Range: –65 to +225°F / –54 to +107°C Std.
–65 to +300°F / –54 to +149°C HEFT 2
• HP coated core and polymer liner.
3 SERIES
Travel
Bulkhead End Clamp End
DIM ”A”
Inch/(mm) Inch/(mm)
1.0
4.44
(25.4)
(112.8)
2.0
5.94
(50.8)
(150.9)
3.0
7.44
(76.2)
(189.0)
4.0
8.94
(101.6)
(227.1)
5.0
10.44
(127.0)
(265.2)
DIM ”B”
Push
Inch/(mm)
Lbs./(N)
3.75
0
(95.3)
5.25
0
(133.4)
6.75
0
(171.5)
8.25
0
(209.6)
9.75
0
(247.7)
Pull
Lbs./(N)
120
(534)
120
(534)
120
(534)
120
(534)
120
(534)
4 SERIES
Travel
Bulkhead End Clamp End
DIM ”A”
Inch/(mm) Inch/(mm)
1.0
4.69
(25.4)
(119.1)
2.0
6.19
(50.8)
(157.2)
3.0
7.69
(76.2)
(195.3)
4.0
9.19
(101.6)
(233.4)
5.0
10.69
(127.0)
(271.5)
Operating Loads
Operating Loads
DIM ”B”
Push
Inch/(mm)
Lbs./(N)
4.06
0
(103.1)
5.56
0
(141.2)
7.06
0
(179.3)
8.56
0
(217.4)
10.06
0
(255.5)
Pull
Lbs./(N)
230
(1023)
230
(1023)
230
(1023)
230
(1023)
230
(1023)
6 SERIES
Travel
Bulkhead End Clamp End
DIM ”A”
Inch/(mm) Inch/(mm)
1.0
5.23
(25.4)
(130.3)
2.0
6.63
(50.8)
(168.4)
3.0
8.13
(76.2)
(206.5)
4.0
9.63
(101.6)
(244.8)
5.0
11.13
(127.0)
(282.7)
13
Operating Loads
DIM ”B”
Push
Inch/(mm)
Lbs./(N)
4.44
0
(112.8)
5.94
0
(150.9)
7.44
0
(189.0)
8.94
0
(227.1)
10.44
0
(265.2)
Pull
Lbs./(N)
400
(1779)
400
(1779)
400
(1779)
400
(1779)
400
(1779)
DIMENSIONS
3 SERIES
4 SERIES
6 SERIES
C
#10-32 UNF-2A
1/4-28 UNF-2A
5/16-24 UNF-2A
D
1.25
(31.8)
1.25
(31.8)
1.56
(39.6)
E
1.13
(28.7)
1.50
(38.1)
1.75
(44.5)
F
7/16-20 UNF-2A
5/8-18 UNF-2A
11/16-16 UNF-2A
G
.31 DIA
(7.9)
.41 DIA
(10.4)
.51 DIA
(13.0)
H
.08 DIA
(2.0)
.13 DIA
(3.3)
.18 DIA
(4.6)
I
.250 DIA
(6.4)
.406 DIA
(10.3)
.469 DIA
(11.9)
J
.125
(3.2)
.219
(5.6)
.219
(5.6)
K
#10-32 UNF-2A
1/4-28 UNF-2A
5/16-24 UNF-2A
L
1.25
(31.8)
1.25
(31.8)
1.56
(39.6)
Building a Part Number
Cable Series:
3,4,6
Cable Travel:
1,2,3,4,5
Overall Length
In Inches
(mm when M
prefix is used
Conduit Fitting Type:
Bulkhead - 2
Clamp - 3
Cable Type:
1 Hi-Performance (Standard)
3 HEFT 2 (Hi-Performance & High Temperature)
Felsted Brand Cable Products Are Available Through A Network Of Local F.A.S.T.® Cable Assemblers
www.orschelnproducts.com
• Power take off operation • .093 Solid Stainless Steel Core
• Full 5” travel
• 6” Bend radius
PTO Cables
Power Take Off Cables
Building a Part Number
Red knob - standard
Temperature Range: –65 to +225°F / –54 to +107°C Std.
Overall Length
In Inches
(mm when M
prefix is used)
• Remote valve control operation (Felsted levers ONLY).
• HP Cable construction - same as 4 Series Push-Pull on pages 3 - 4.
RVO Cables
Can be custom assembled by local F.A.S.T. distributors
Valve Connection Kit End
Building a Part Number
Cable Type:
1 Hi-Performance (Standard)
3 HEFT 2
(Hi-Performance & High Temperature)
Overall Length
In Inches (mm when M prefix is used)
Conduit Fitting Type:
Universal = 00
Bulkhead = 22
Clamp = 23
Connects to
Felsted Brand
Remote Valve
Controls
55700
55709
55786-1
Felsted Brand Cable Products Are Available Through A Network Of Local F.A.S.T.® Cable Assemblers
www.orschelnproducts.com
14
• Remote Valve Control Cables
• Fits Morse RVC Controls
RVC Cables
Can be custom assembled by local F.A.S.T. distributors
P/N 45793–Length
P/N 45795–Length
P/N 45794–Length
Special Valve Control Cables
• HD lever applications
• Remote valve dump body control use • HP cable construction
Can be custom assembled by local F.A.S.T. distributors
Base Part Number
OAL inches
1 0 0
4 5 6 3 0
0
1 0 0
4 5 6 3 9
0
1 0 0
4 5 7 3 4
0
1 0 0
4 5 7 9 6
0
15
Valve End Connection
11/16" –16 thread connects to
valve connection kit
11/16" –16 thread connects to
valve connection kit
11/16" –16 thread connects to
valve connection kit
3/4"–16 thread connects to valve
connection kit
Control End Connection
5/8"-18 bulkhead hub connects to an HD
Lever
Clamp hub connects to a 55781-2 dump
body control shifter
Clamp hub connects to a 3" mounting
dump body control shifter
Clamp hub connects to a 55781-2 dump
body control shifter
Felsted Brand Cable Products Are Available Through A Network Of Local F.A.S.T.® Cable Assemblers
www.orschelnproducts.com
Hardware
CONDUIT CLIP
CLEVISES
A
B
C
D
E
3 SERIES
39003-1
**
49003-2
69003-2
*
Part #
10-32
UNF-2B
10-32
UNF-2B
10-32
UNF-2B
3/16”
(4.8mm)
1/4”
(6.4mm)
5/16”
(7.9mm)
7/32”
(5.6mm)
9/32”
(7.1mm)
11/32”
(8.7mm)
1”
(25.4mm)
1-1/4”
(31.8mm)
1-7/16”
(36.5mm)
1-9/16”
(39.7mm)
2”
(50.8mm)
2-1/4”
(57.2mm)
4 SERIES
49003-1
49044-1
*
69003-3
1/4-28
UNF-2B
1/4-28
UNF-2B
1/4-28
UNF-2B
1/4”
(6.4mm)
1/2”
(12.7mm)
5/16”
(7.9mm)
9/32”
(7.1mm)
9/16”
(14.3mm)
11/32”
(8.7mm)
1-1/4”
(31.8mm)
1-7/8”
(47.6mm)
1-7/16”
(36.5mm)
2”
(50.8mm)
3”
(76.2mm)
2-1/4”
(57.2mm)
6 SERIES
49003-3
49044-2
69003-1
69034
89003-2
5/16-24
UNF-2B
5/16-24
UNF-2B
5/16-24
UNF-2B
5/16-24
UNF-2B
5/16-24
UNF-2B
1/4”
(6.4mm)
1/2”
(12.7mm)
5/16”
(7.9mm)
7/16”
(11.1mm)
3/8”
(9.5mm)
9/32”
(7.1mm)
9/16”
(14.3mm)
11/32”
(8.7mm)
1/2”
(12.7mm)
7/16”
(11.1mm)
1-1/4”
(31.8mm)
1-7/8”
(47.6mm)
1-7/16”
(36.5mm)
1-7/8”
(47.6mm)
1-5/8”
(41.3mm)
2”
(50.8mm)
3”
(76.2mm)
2-1/4”
(57.2mm)
2-7/8”
(73.1mm)
2-1/2”
(63.5mm)
8 SERIES
89003-1
*
3/8-24
UNF-2B
3/8”
(9.5mm)
7/16”
(11.1mm)
1-5/8”
(41.3mm)
2-1/2”
(63.5mm)
*SPECIAL SERIES
3/8-24
49044-3
UNF-2
49044-4
1/2-20
UNF-2
*
3/8-24
69034-1
UNF-2
1/2”
(12.7mm)
1/2”
(12.7mm)
7/16”
(11.1mm)
9/16”
(14.3mm)
9/16”
(14.3mm)
1/2”
(12.7mm)
1-7/8”
(47.6mm)
1-7/8”
(47.6mm)
1-7/8”
(47.6mm)
3”
(76.2mm)
3”
(76.2mm)
2-7/8”
(73.1mm)
* Consult factory for leadtime and availability.
** Note: The 39003-1 clevis is made of polymer and is
not identical to the illustration shown above.
PIVOT
A
B
C
D
E
3 SERIES
39011-1
B
Part #
Type
7/64”
(2.8mm)
1/4”
(6.4mm)
5/32”
(4.0mm)
5/16”
(7.9mm)
9/16”
(14.3mm)
39011-2
B
7/64”
(2.8mm)
1/4”
(6.4mm)
19/64”
(7.5mm)
5/16”
(7.9mm)
11/16”
(17.5mm)
39050-2
B
*
39042
A
7/64”
(2.8mm)
10-32
UNF-2B
5/16”
(7.9mm)
1/4”
(6.4mm)
19/64”
(7.5mm)
13/64”
(5.2mm)
5/16”
(7.9mm)
21/64”
(8.3mm)
11/16”
(17.5mm)
5/8”
(15.9mm)
39045
A
*
4 SERIES
10-32
UNF-2B
5/16”
(7.9mm)
3/8”
(9.5mm)
3/8”
(9.5mm)
15/16”
(23.8mm)
49008
A
*
49008-1
A
49011
A
49042
A
50061-1
A
1/4-28
UNF-2B
1/4-28
UNF-2B
1/4-28
UNF-2B
1/4-28
UNF-2B
1/4-28
UNF-2B
1/4”
(6.4mm)
1/4”
(6.4mm)
1/4”
(6.4mm)
3/8”
(9.5mm)
5/16”
(7.9mm)
13/32”
(10.3mm)
5/16”
(7.9mm)
13/64”
(5.2mm)
15/32”
(11.9mm)
3/16”
(4.8mm)
1/2”
(12.7mm)
1/2”
(12.7mm)
7/16”
(11.1mm)
1/2”
(12.7mm)
9/16”
(14.3mm)
1-1/16”
(27.0mm)
31/32”
(24.6mm)
3/4”
(19.1mm)
1-3/16”
(30.2mm)
27/32”
(21.4mm)
D
E
CLIP BRACKET
BALL JOINT
Part #
Type
A
D
E
15/32”
9/16”
(11.9mm) (14.3mm)
1/4-28
UNF-2A
31/32”
(24.6mm)
1/4-28
UNF-2B
15/32”
9/16”
(11.9mm) (14.3mm)
1/4-28
UNF-2A
31/32”
(24.6mm)
49007
A
1/4-28
UNF-2B
15/32”
7/8”
(11.9mm) (22.2mm)
5/16-24
UNF-2A
31/32”
(24.6mm)
6 SERIES
69007
A
5/16-24
UNF-2B
17/32”
11/16”
(13.5mm) (17.5mm)
5/16-24
UNF-2A
1-1/8”
(28.5mm)
3 SERIES
39006
A
10-32
UNF-2B
4 SERIES
49006
A
B
C
Part #
Type
3 SERIES
30121
B
39004-1
A
Stainless
39004-2
A
Plated Steel
A
B
9/32”
(7.5mm)
9/32”
(7.5mm)
9/32”
(7.5mm)
3/8”
(9.5mm)
3/8”
(9.5mm)
3/8”
(9.5mm)
C
1/4”
5/8”
1-7/32”
(6.4mm) (15.9mm) (30.0mm)
1/4”
5/8”
1-5/16”
(6.4mm) (15.9mm) (33.3mm)
1/4”
5/8”
1-5/16”
(6.4mm) (15.9mm) (33.3mm)
*Consult factory for leadtime and availability.
Felsted Brand Cable Products Are Available Through A Network Of Local F.A.S.T.® Cable Assemblers
www.orschelnproducts.com
16
Hardware Continued
STOP COLLAR
A
B
CD
3 SERIES
30103
A
Part #
Type
7/64”
(2.8mm)
5/16”
(7.9mm)
5/16”
(7.9mm)
–
–
4 SERIES
40081
A
*
3/16”
(4.8mm)
5/16”
(7.9mm)
5/16”
(7.9mm)
–
–
49043
B
3/16”
(4.8mm)
1/4”
(6.4mm)
7/16”
(11.1mm)
–
–
TERMINAL
EYES
Part #
A
B
C
D
E
10-32
UNF-2B
1/8”
(3.2mm)
5/8”
(15.9mm)
3/8”
(9.5mm)
1-7/8”
(47.6mm)
49004-1
49004-2
*
1/4-28
UNF-2B
1/4-28
UNF-2B
5/16”
(7.9mm)
1/2”
(12.7mm)
5/8”
(15.9mm)
5/8”
(15.9mm)
3/8”
(9.5mm)
3/8”
(9.5mm)
1-7/8”
(47.6mm)
1-7/8”
(47.6mm)
49004-3
1/4-28
UNF-2B
1/4”
(6.4mm)
5/8”
(15.9mm)
3/8”
(9.5mm)
1-7/8”
(47.6mm)
3 SERIES
49004-4
*
4 SERIES
6 SERIES
69004-1
5/16-24
UNF-2B
3/8”
(9.5mm)
5/8”
(15.9mm)
3/8”
(9.5mm)
1-7/8”
(47.6mm)
69004-2
*
69004-3
*
5/16-24
UNF-2B
5/16”
(7.9mm)
5/8”
(15.9mm)
3/8”
(9.5mm)
1-7/8”
(47.6mm)
5/16-24
UNF-2B
1/2”
(12.7mm)
5/8”
(15.9mm)
3/8”
(9.5mm)
1-7/8”
(47.6mm)
69004-4
5/16-24
UNF-2B
1/4”
(6.4mm)
5/8”
(15.9mm)
3/8”
(9.5mm)
1-7/8”
(47.6mm)
FIELD CLAMP
SLIP LINK KIT
Kit Number
59049-1
59049-2
10-32 UNF-2A
1/4-28 UNF-2A
Metal
M00-59049-1
M00-59049-2
10-32 UNF-2A
1/4-28 UNF-2A
SHIM
Part #
Part #
3 SERIES
39001
B
C
D
E
3/8”
(9.5mm)
1”
(25.4mm)
13/64”
(5.2mm)
1/2”
(12.7mm)
1-1/2”
(38.1mm)
1/2”
(12.7mm)
1”
(25.4mm)
7/32”
(5.6mm)
1/2”
(12.7mm)
1-1/2”
(38.1mm)
9/16”
(14.3mm)
1-1/4”
(31.8mm)
9/32”
(7.1mm)
5/8”
(15.9mm)
1-5/8”
(41.3mm)
6 SERIES
69001
17
C
D
E
1”
(25.4mm)
1/2”
(12.7mm)
3/32”
(2.4mm)
1-1/2”
(38.1mm)
9/32”
(7.5mm)
1-1/4”
(31.8mm)
5/8”
(15.9mm)
5/64”
(2.0mm)
1-3/4”
(44.5mm)
SHIFTER CABLE
CONNECTION KIT
4 SERIES
49001
A
B
6 SERIES
69002
A
3 & 4 SERIES
13/64”
39002
(5.2mm)
CLAMP
”A” THD.
Polymer
Kit #
50030
50035
59033
A THD.
B DIA.
C
D THD.
E
1/4-28
UNF-2B
5/16-24
UNF-2B
10-32
UNF-2B
5/16”
(7.9mm)
5/16”
(7.9mm)
5/16”
(7.9mm)
1”
(25.4mm)
1-1/4”
(31.8mm)
1”
(25.4mm)
10-32
UNF-2A
1/4-20
UNF-2A
10-32
UNC-2A
1/8”
(3.2mm)
1/8”
(3.2mm)
1/8”
(3.2mm)
Felsted Brand Cable Products Are Available Through A Network Of Local F.A.S.T.® Cable Assemblers
www.orschelnproducts.com
Specifications
Routing/Measuring
Measure the cable along the path it will take from the
points where the cable hubs will be anchored. Follow the
actual cable path as closely as possible, allowing for the
largest practical bend radii.
Optimum Life Bend Radii
Series 3
4
6
8
Operating Life Minimum
3 inches*
5 inches
7 inches
10 inches
* HP Core: Solid Core has 6” Bend Radii
Installation Notes: Control & Work End
Where a Felsted Brand cable is to be connected to objects
requiring linear movement only (e.g. spool valves), maximum life and efficiency is achieved by accurately aligning,
in both planes, the cable hubs and the controlled object.
See illustration:
For highest efficiency and long life in lever actuating
operations, install the cable so that the highest loads
are operated with tension (pulling), rather than
compression (pushing).
Where the cable is connected to a lever, the cable will be
mounted so that it lies on a plane (A) midway on the arc
(B) described by the movement of the connection point
on the lever (C).
It is important to securely anchor the cable hubs.
Looseness of the mounting bracket will be perceived as
lost motion ”sponginess” and will inhibit detent feel.
Also, clamping in the bend area may reduce bend radii
under operating loads. Clamping at tangents to the bend
is preferred.
All Felsted cables with rod and sleeve type end fittings have
a built-in swivel to handle deflections up to 8°.
Felsted Brand Cable Products Are Available Through A Network Of Local F.A.S.T.® Cable Assemblers
www.orschelnproducts.com
18
Products
Markets
TRUCK
PARK BRAKE SYSTEMS
BUS
MECHANICAL
CONTROL CABLES
CONSTRUCTION
FLUID LEVEL INDICATORS
AGRICULTURE
ELECTRONIC THROTTLE
CONTROL SYSTEMS
MILITARY
SHIFT CONTROL SYSTEMS
Orscheln Products LLC
1177 N. Morley
P.O. Box 280
Moberly, MO 65270
USA
Phone: +1 660-263-4377
Fax: +1 660-269-3910
Email: sales@orscheln.com
www.orschelnproducts.com
Orscheln Europe
1 Pelham Road
Rugby, England CV23 0PB
UK
Phone: +44 (0) 1 788 651400
Fax: +44 (0) 1 788 567555
Email: sales@orschelneurope.co.uk
www.orschelneurope.co.uk
Orscheln Products Trading
(Shanghai) Co. Ltd./
欧曲岚贸易(上海)有限公司
501, 5/F. Block 10
KIC Plaza
290 Songhu Road, Yang Pu Area
Shanghai
China
Phone: +86 21 5228 3110
Fax: +86 21 5228 3115
www.orschelnproducts.com
Orscheln Remsons
Technologies PVT Ltd.
A 2/3 Somnath Industrial Estate
Somnath, Daman 396210
India
Phone: +011 260 2244019
Fax: +011 260 2244020
www.orschelnremsons.com
Specifications subject to change without notice.
HPCABCAT0709
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising