voltage probe - HD Electric Company

voltage probe - HD Electric Company
TEST, MEASUREMENT & SAFETY
Voltage Detector
VOLTAGE
PROBE
The VP-1 Voltage Probe is designed to be used as a hand
held direct contact secondary voltage detector from
50VAC to 600VAC. It can also be used as a proximity voltage
detector for voltages exceeding 21kVAC when using
appropriately rated electrical insulating gloves. The VP-1
gives a flashing red light and beeping indication when
voltage is detected. The VP-1 should be tested before
and after use with the accessory PT-VP Voltage Probe Tester.
FEATURES & BENEFITS
• Tests exposed metallic surfaces and conductors
for the presence of secondary voltage
• Tests unshielded primary voltage cable insulation
• Tests primary voltage joint and termination
test points for the presence of voltage
• Simple indication of voltage – flashing red light and beeper
• Compact, lightweight and easy-to-use
• No on/off switch – always on
• Super bright LED indicator
• Low battery indicator - when flashing light is no longer visible
• Powered by 2 AA field replaceable lithium or alkaline batteries
Voltage Probe Kit with
PT-VP Voltage Probe Tester
and B-35 Carrying Bag
SPECIFICATIONS
VP-1 VOLTAGE PROBE
Operating voltage: 50VAC to 600VAC hand held;
600VAC to 21kVAC line-to-ground hand held using
appropriately rated electrical insulating gloves
Operating Frequency: 50/60Hz
Weight: 9.6 ounces (0.27 kg)
Dimensions: 10” length (25.4 cm)
Battery: 2 AA field replaceable lithium or alkaline batteries
PT-VP VOLTAGE PROBE TESTER
Weight: 8.3 ounces (0.24 kg)
Dimensions: 6.5” length (16.5 cm)
Battery: 9V field replaceable lithium or alkaline battery
ORDERING INFORMATION
VP-1/K01
Kit includes VP-1, PT-VP and B-35 carrying bag.
VP-1
Voltage Probe with instruction manual.
Accessories
PT-VP
Tests VP-1 Voltage Probe for proper operation. Powered by field
replaceable 9V lithium or alkaline battery.
B-35
Padded, zippered carrying bag with strap for VP-1 and PT-VP.
For overhead voltage detection it is recommended that the DVI
Digital Voltage Indicators or TAG Voltage Detectors be used.
All sales are subject to the terms and conditions of the Limitation of Warranty and Liability
set forth in the product Instruction Manual found at www.HDElectricCompany.com.
Users must read and agree to the Limitation terms, as stated, before using the product.
HD Electric Company® is committed to ongoing review and improvement of its product lines,
and thus reserves the right to modify product design and specifications without notice.
HD Electric Company products are available through HDE® sales representatives worldwide.
Printed in U.S.A. © HD Electric Company 2015 • Bulletin No. VP1-100d
1475 Lakeside Drive • Waukegan, Illinois 60085 U.S.A. • 847.473.4980
f a x 8 4 7 . 4 7 3 . 4 9 8 1 • w e b s i t e : w w w. H D E l e c t r i c C o m p a n y. c o m
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising