INLINE® Operator Interface Enclosure System
INLINE® Operator Interface
Enclosure System
Operator Interface
Enclosure Systems
Bulletin
C3, A54P, A54Y
Like their industrial enclosure counterpart, these
INLINE Operator Interface (OI) enclosures are remarkably well-suited to protecting vulnerable small OI
devices in control applications.
All INLINE OI enclosures combine an attractive
design with practical functionality. As a result, the
enclosures are highly adaptable. Several different
body and window styles are available for maximum
flexibility. Front plates and bezels are also offered as
accessories.
Designed to be mounted wherever operator con-
trols are needed, INLINE OI enclosures have several
mounting options. The enclosures can be easily mounted to a pedestal, wall-mounted, or attached to either
the COMPACT® Series 1 or Series 2 pendant arm.
OI-2
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
INLINE® Operator Interface
Enclosure System
Operator Interface
Enclosure Systems
Bulletin
C3, A54P, A54Y
Operator Interface
Enclosure Systems
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-3
INLINE® Operator Interface
Enclosure System
Operator Interface
Enclosure Systems
Bulletin
C3, A54P, A54Y
Application
Industry Standards
INLINE Operator Interface enclosures can be used as control
housings for a number of small flat screen OI devices, pushbuttons,
lights, meters, gauges, and other similiar devices. These enclosures
can be configured to accommodate either subpanel or DIN rail
internal mounting. Enclosures are manufactured to be pendant-,
pedestal-, or wall-mounted.
UL 508A, File Number E61997: Type 4, 12
NEMA/EEMAC Type 4, 12
CSA File Number 42186: Type 4, 12
IEC 60529, IP66
Finish
See Accessories for details.
RAL 7035 textured light gray polyester powder paint inside and out
over phosphatized surfaces. Optional panels are white.
Corrosion Inhibitors
Electric Heaters
Touch-Up Paint (ATPG7035)
OI-4
Accessories
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Operator Interface
Enclosure Systems
INLINE® Operator Interface
Enclosure System
Solid Back Body
Solid back body is 16 gauge steel with open front. Front is configured
to install optional fixed bezel, deep-hinged window, or fixed window.
Panels or DIN rails mount on studs in the rear of the enclosure.
Ground stud furnished. Drill points on enclosure mark location for
pendant or pedestal mounting.
Bulletin
C3, A54P, A54Y
Catalog Number
A x B x C mm (in.)
Description
Product Weight
LLB161612
166 x 160 x 102
(6.54 x 6.30 x 4.00)
250 x 250 x 102
(9.84 x 9.84 x 4.00)
Solid Back Body
2.7 lb
Solid Back Body
5.0 lb
LLB252512
Operator Interface
Enclosure Systems
Rear Access Body
Enclosure body is 16 gauge steel with rear access door. Open front
is configured to install optional fixed bezel, deep-hinged window, or
fixed window. Rear door, furnished with foam-in-place gasket and
quarter-turn latch (standard slotted insert), accepts most INLINE
door accessories. Ground stud furnished. Drill points on enclosure
mark location for pendant or pedestal mounting.
Catalog Number
A x B x C mm (in.)
Description
Rear Door Opening (mm)
Rear Door Opening (in.)
Product Weight
LLBR161612
166 x 160 x 120
(6.54 x 6.30 x 4.72)
250 x 250 x 120
(9.84 x 9.84 x 4.72)
Rear Access Body
148 x 142
5.82 x 5.58
3.4 lb
Rear Access Body
232 x 232
9.13 x 9.13
5.7 lb
LLBR252512
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-5
Operator Interface
Enclosure Systems
INLINE® Operator Interface
Enclosure System
Rev. A 7/07
Fixed Window Kit
Aesthetic die-cast frame
has .125-inch-thick clear
polycarbonate window.
Preassembled kit is
secured to front opening
of enclosure by mounting
screws. Window frame caps
conceal mounting screws.
Frame has RAL 7035 light
gray textured polyester
powder paint.
Deep-Hinged Window
Bulletin
C3, A54P, A54Y
AxBxC
Catalog Number mm (in.)
Window Size Window Size Product
M x N (mm) M x N (in.)
Weight
LWF1616
136 x 100
5.35 x 4.30
1.5 lb
220 x 200
8.65 x 7.84
2.7 lb
166 x 160 x 17
(6.54 x 6.30 x 0.67)
250 x 250 x 17
(9.84 x 9.84 x 0.67)
LWF2525
Catalog
Number
AxBxC
mm (in.)
Accepts
Window Size Window Size Front
Product
M x N (mm) M x N (in.)
Plate a Weight
LWHD1616 166 x 160 x 41
139 x 112
(6.54 x 6.30 x 1.64)
LWHD2525 250 x 250 x 41
223 x 202
(9.84 x 9.84 x 1.64)
5.47 x 4.43
LFP1616 1.5 lb
8.78 x 7.97
LFP2525 2.8 lb
a Order separately.
Clear molded polycarbonate window has a 31.8 mm
(1.25 in.) clear space between enclosure front opening
and window surface. Space also accommodates
equipment mounted on optional front plate. Window
kit is hinged on left side, has a 140-degree door opening,
and a quarter-turn slotted latch. Mounting hardware for
window and optional front plate is included. Die-cast
backing plate is painted with a black polyester powder
finish. This kit can be used as an accessory window kit
on other Hoffman enclosures.
OI-6
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Operator Interface
Enclosure Systems
INLINE® Operator Interface
Enclosure System
Bulletin
C3, A54P, A54Y
Fixed Operator Interface Bezel
Front Plate
Aluminum plate is .125
inch thick. Front plate
mounts to inside of bezel
or deep-hinged window.
(Gasket and mounting
hardware are included
with bezel.)
NOTE: Hoffman can
provide pre-configured front
plates to meet your specific
requirements. Contact
your local Hoffman Sales
Representative for more
information.
LBF1616 166 x 160 x 17
136 x 109
(6.54 x 6.30 x 0.67)
LBF2525 250 x 250 x 17
220 x 200
(9.84 x 9.84 x 0.67)
Product
Weight
5.35 x 4.30
LFP1616
1.4 lb
8.65 x 7.84
LFP2525
2.4 lb
a Purchase front plate separately.
Operator Interface
Enclosure Systems
Aesthetic die-cast bezel
frame accepts front plate
or plates with operator
interface cutout. Gasket
and mounting hardware
are included. Furnished
frame caps conceal
mounting screws. Bezel
has RAL 7035 light gray
textured polyester
powder paint.
Accepts
Window Size Window Size Front
M x N (mm) M x N (in.)
Plate a
Catalog A x B x C
Number mm (in.)
Catalog
Number
Fits
Bezel a
Fits Deep
Window a
Product
Weight
122
(4.80)
LBF1616
LWHD1616
0.5
212
(8.34)
LBF2525
LWHD2525
1.1
D mm (in.)
E mm (in.)
LFP1616
149
(5.85)
LFP2525
233
(9.16)
a Purchase deep window separately.
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-7
Operator Interface
Enclosure Systems
INLINE® Operator Interface
Enclosure System
Panel
Panel is 12 gauge steel and fits
solid back body enclosures
only. Panels are painted white.
DIN Rail or Panel Mounting Brackets
Brackets provide a mounting
framework for installing DIN
rails or a panel. Rails (or
panel) attach to the brackets,
and the brackets are bolted
directly to the enclosure.
Brackets are offset to permit
additional space in front of or
behind mounted equipment.
Brackets are plated 12 gauge
steel.
DIN Type Rails
OI-8
Catalog
Number
D (mm)
D (in.)
E (mm)
E (in.)
Fits INLINE OI
Enclosure
Product
Weight
LP1515
LP2520
131
231
5.16
9.09
131
181
5.16
7.13
LLB161612
LLB252512
0.7 lb
1.8 lb
Catalog Number
Fits INLINE OI Enclosure
LMK15
LLB161612
LMK20
LLB252512a
LMK25
LLB252512b
a Fits horizontally (see drawing below).
b Fits vertically (see drawing below).
Catalog Number
Rails furnish mounting surfaces
for DIN3 mount snap-on
devices. Rails attach vertically
or horizontally to mounting
brackets. Kit includes 4 rails,
mounting hardware, and
installation instructions.
Bulletin
C3, A54P, A54Y
Fits INLINE OI Enclosure
LDR3P15
LLB161612
LDR3P20
LLB252512a
LDR3P25
LLB252512b
a Fits horizontally (see drawing below).
b Fits vertically (see drawing below).
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
Product Weight
0.5 lb
0.6 lb
0.7 lb
Product Weight
0.4 lb
0.5 lb
0.7 lb
© 2007 Hoffman Enclosures Inc.
Operator Interface
Enclosure Systems
INLINE® Operator Interface
Enclosure System
Lock Inserts
Lock inserts can be substituted for
the standard slotted quarter-turn
latch on hinged cover and window
cover enclosures. Inserts have
chrome finish. Key included. See
the Accessories chapter for unique
keys.
Wing Knob Latch can replace
the standard slotted quarterturn latch on all hinged cover and
window cover enclosures. Latch
is black die-cast zinc. Reduces
type rating from 4 to 12. Does not
maintain Type 4X rating. Two keys
and installation instructions are
furnished.
Mounting Bracket Kit
Kit is field installable on all solid
back body enclosures. Hardware
included. Four brackets per kit.
Grounding Kit
Grounding Kit provides a means of
attaching a grounding conductor to
the enclosure. Kit consists of two
copper wires with a ring terminal
at each end. Wires are insulated.
All installation hardware and
instructions are included.
Catalog Number
Description
LLKDB
LLKDBM3
LLKSM7
LLKSM8
LLKSS
Daimler Benz
Double bit 3mm
Square 7mm
Square 8mm
Slotted
Catalog Number
Product Weight
LLKWK
0.2 lb
Operator Interface
Enclosure Systems
Wing Knob Latch
Bulletin
C3, A54P, A54Y
Catalog Number
Description
Fits Enclosure
LMFK
Plated steel mounting bracket kit
LLB161612 and LLB252512
Catalog Number
Product Weight
LLGK
0.2 lb
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-9
Rev. A 5/07
CC2000 Operator Interface
Enclosure System
Operator Interface
Enclosure Systems
Bulletin
CC2
This stylish operator interface enclosure family
continues the trend of visual appeal combined with
functionality and ease of use. Extruded aluminum
top and sides provide a quality look, and hinged body
models provide extra depth and allow rear access.
Front plates are available to fit a wide variety of OI
devices.
Application
Finish
These highly aesthetically appealing operator interface enclosures
provide the ideal solution for applications requiring an attractive
appearance. Enclosures are designed to be used with flat screen OI
devices, lights, meters, gauges, and other similar equipment.
All body sizes and styles are available for pendant mounting. Hinged
and solid bodies are available in the sizes shown. Rear aluminum door
is standard.
These enclosures are used with the Hoffman COMPACT® Series 4
System 50, 60, or 80, or the CS600 pendant arm system.
Enclosure vertical components are clear anodized aluminum;
horizontal components are aluminum painted RAL 7043 gray
aluminum.
Aluminum front plates and rear covers have a clear anodized brushed
finish.
Construction
• Extruded Type 6063 aluminum top and sides provide a quality
appearance and internal flexibility
• Body is available hinged or solid
• Rear doors can be hinged on either the right or left side
• Integral mounting system has extruded screw channels to facilitate
easy component installation
• Each size is designed to accommodate a range of flat screen
operator interface devices
• Oil resistant gasket attached with oil resistant adhesive
• High thermal conductivity for superior heat dissipation
OI-10
Industry Standards
UL 508A, File No. E61997: Type 12
cUL CSA C22.2 No. 94, File No. E61997: Type 12
NEMA/EEMAC Type 12
IEC 60529, IP55
DIN 40050
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
CC2000 Operator Interface
Enclosure System
Operator Interface
Enclosure Systems
Bulletin
CC2
Operator Interface
Enclosure Systems
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-11
Operator Interface
Enclosure Systems
CC2000 Operator Interface
Enclosure System
Bulletin
CC2
Standard Sizes CC2000 Operator Interface Enclosures
Catalog Number
CC376129
CC466129
CC466141
CC466151
CC616129
CC616141
CC616151
CC376518
CC464618
a
AxBxC
mm (in.)
375 x 615 x 290
(14.76 x 24.21 x 11.42)
465 x 615 x 290
(18.46 x 24.21 x 11.42)
465 x 615 x 418
(18.46 x 24.21 x 16.46)
465 x 615 x 518
(18.46 x 24.21 x 21.57)
615 x 615 x 290
(24.21 x 24.21 x 11.42)
615 x 615 x 418
(24.21 x 24.21 x 16.46)
615 x 615 x 518
(24.21 x 24.21 x 21.57)
375 x 465 x 180
(14.76 x 18.46 x 7.09)
465 x 465 x 180
(18.46 x 18.46 x 7.09)
Body Style
Usable Area
D x E (mm)
Usable Area
D x E (in.)
Depth F (mm)
Depth F (in.)
Cutout Sizea
Weight
(lb)
Solid
300 x 540
11.81 x 21.26
—
—
60
32
Solid
390 x 540
15.35 x 21.26
—
—
60
35
Solid
390 x 540
15.35 x 21.26
—
—
60
51
Solid
390 x 540
15.35 x 21.26
—
—
60
63
Solid
540 x 540
21.26 x 21.26
—
—
60
39
Solid
540 x 540
21.26 x 21.26
—
—
80
58
Solid
540 x 540
21.26 x 21.26
—
—
80
72
Hinged
300 x 390
11.81 x 15.35
127
5.00
60
22
Hinged
390 x 390
15.35 x 15.35
127
5.00
60
24
Cutout is for flange coupling only. Other components can be used if they have the same hole size.
OI-12
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
CC2000 Operator Interface
Enclosure System
Operator Interface
Enclosure Systems
Bulletin
CC2
Front Plate
Front plates are available in
14 gauge aluminum with clear
anodized brushed finish.
NOTE: Hoffman can provide preconfigured front plates to meet your
specific requirements. Contact your
local Hoffman Sales Representative
for more information.
Panel Size D x E mm (in.) Panel Size M x N mm (in.) Fits Enclosure (mm)
Fits Enclosure (in.)
Product Weight (lb)
C2FP3155
314 x 554
(12.36 x 21.81)
404 x 554
(15.90 x 21.81)
554 x 554
(21.81 x 21.81)
314 x 404
(12.36 x 15.90)
404 x 404
(15.90 x 15.90)
375 x 615 x 290
14.76 x 24.21 x 11.42
3.0
465 x 615 x 518/418/290
18.31 x 24.21 x 20.39/16.46/11.42
3.8
615 x 615 x 518/418/290
24.21 x 24.21 x 20.39/16.46/11.42
5.4
375 x 465 x 180
14.76 x 18.31 x 7.09
2.2
465 x 465 x 180
18.31 x 18.31 x 7.09
2.8
C2FP4055
C2FP5555
C2FP3140
C2FP4040
540 x 300
(21.26 x 11.81)
540 x 390
(21.26 x 15.35)
540 x 540
(21.26 x 21.26)
390 x 300
(15.35 x 11.81)
390 x 390
(15.35 x 15.35)
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-13
Operator Interface
Enclosure Systems
Catalog Number
Rev. B 8/07
CC3000 Operator Interface
Enclosure System
Operator Interface
Enclosure Systems
Bulletin
CC3
This modern industrial design, with its modular concept, allows customer-
specific solutions. It’s available with three different depth profiles; five
possible design variants can be made by combining various profiles. The
system’s capability for pendent or pedestal mounting, with or without
provision for a keyboard, offers exceptional design flexibility. Extruded
aluminum top and sides provide a quality look while offering superior heat
dissipation. Hinged body profiles provide extra depth and allow front or
rear access. Accessory colors are available to match the most popular
human-machine interface (HMI) devices.
OI-14
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Rev. A 8/07
CC3000 Operator Interface
Enclosure System
Operator Interface
Enclosure Systems
Bulletin
CC3
Operator Interface
Enclosure Systems
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-15
Rev. B 8/07
CC3000 Operator Interface
Enclosure System
Operator Interface
Enclosure Systems
Bulletin
CC3
Application
Finish
The aesthetically appealing CC3000 modular operator interface
enclosures provide the ideal solution for applications that require
an attractive appearance. Enclosures are designed to be used with
flat screen OI devices, lights, meters, gauges, and other similar
equipment.
Enclosure vertical and horizontal components are clear anodized
aluminum. Corner components are finished with RAL 9005 black
polyester powder paint. Aluminum front and rear plates have a
RAL7035 light gray textured polyester powder painted finish.
NOTE: Contact your local Hoffman Sales Representative for assistance with
ordering nonstandard-sized products.
Industry Standards
Features
• High thermal conductivity for superior heat dissipation
• Can be sized to accommodate a wide range of flat screen operator
interface devices
• Compatible with current Hoffman pendent and pedestal offerings
• Extruded channel inside the enclosure for component mounting
• Accessory colors available to match popular OI color schemes
• Modular sizing available from 250mm high x 250mm wide up to
600mm high x 600mm wide
Construction
• Extruded Type 6063 aluminum top and sides provide a quality
appearance and internal flexibility
• Rear doors can be hinged on either the right or left side
• Oil-resistant gasket
OI-16
UL 508A, File No. E61997: Type 12
cUL CSA C22.2 No. 94, File No. E61997: Type 12
NEMA/EEMAC Type 12
IEC 60529, IP55 DIN 40050
Accessories
NOTE: In addition to the accessories shown below, CC3000 enclosures also
can be used with the CC4000 pedestal and keyboard tilt, the COMPACT®
Pendant Arm Series 2 mounting options, and the COMPACT Pendant Arm
Series 4 System 50/60 mounting options. Also, the 200mm profile can use the
Series 4 system, with 80 mounting options. See these sections of the Product
Catalog on hoffmanonline.com.
Accessory Mounting Brackets
Clipboard
Command Handle
Door Stop Kit
Drive Access Door
Fan Mounting Bracket
Keyboard Connecter
Keyboard Drawer
Keyboard Straps
Mouse Pad
Pedestal
Spring Nut Fastener Package
USB Interface
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Operator Interface
Enclosure Systems
CC3000 Operator Interface
Enclosure System
Rev. A 8/07
Bulletin
CC3
Standard Sizes CC3000 Operator Interface Enclosures
Catalog Number
Enclosure Size
A x B x C (mm)
Enclosure Size
A x B x C (in.)
Usable Areae
D x E (mm)
Usable Area
D x E (in.)
CC455520
450 x 550 x 200
17.71 x 21.65 x 7.87
365 x 465
14.37 x 18.31
CC506020
500 x 600 x 200
19.68 x 23.23 x 7.87
415 x 515
16.34 x 20.28
CC536012
530 x 600 x 120
20.87 x 23.23 x 4.72
445 x 515
17.52 x 20.28
CC536020
530 x 600 x 200
20.87 x 23. 23 x 7.87
445 x 515
17.52 x 20.28
Operator Interface
Enclosure Systems
• Handles on all four sides of enclosure
• Cutout in top for mounting with COMPACT® Series 2 or Series 4 System 50 or 60 pendant offerings
• Rear door hinged left with 1/4-turn slotted latch
Depth Options
The CC3000 enclosure system includes depth profile choices of 120 and 200mm. A 55mm profile is available as a hinged extension. Depth
profiles can be ordered with or without a handle and can be used in the combinations shown. Order these options using the CC3000 Quotes
tool. Contact your Hoffman Representative for details.
200mm
200mm + 55mm
55mm + 200mm
120mm
120mm + 55mm
55mm + 120mm
Profile Depth Internal Dimensions
Type of Assembly
Front Plate
Rear Panel
Profile Depth (mm)
Usable Depth (mm)
Usable Depth (in.)
Single-profile assembly
Internally mounted
Secured or hinged
120
103
4.06
200
183
7.21
120 + 55
149
5.86
200 + 55
229
9.02
Two-profile assembly
Internally mounted
Internally mounted
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-17
Rev. A 8/07
CC3000 Operator Interface
Enclosure System
Operator Interface
Enclosure Systems
Bulletin
CC3
Accent Colors
Four accent colors are offered for the integral handle extrusions and end caps. Blue, purple, red, and turquoise are available. Order these
options using the CC3000 Quotes tool. Contact your Hoffman Representative for details.
Handle Options
Five options for the placement of handles are available on CC3000
enclosures. Order these options using the CC3000 Quotes tool.
Contact your Hoffman Representative for details.
Handle on right and left
Handle on all four sides
Handle at bottom
Handle on right, left, and bottom (U-shaped)
No handles
OI-18
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Rev. A 8/07
CC3000 Operator Interface
Enclosure System
Operator Interface
Enclosure Systems
Bulletin
CC3
Back Plate Options
The back plate can be either fixed or hinged. Slotted latch insert available for the hinged back plate. Order these options using the CC3000
Quotes tool. Contact your Hoffman Representative for details.
Operator Interface
Enclosure Systems
Fixed back plate
Hinged back plate with latch
Front Plate and Internal Mounting Options
The front plate is internally mounted using adjustable channels inside
the enclosure.
An extruded channel inside the enclosure allows for mounting
components without a back panel.
Front panel internally mounted
Extruded channel
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-19
CC3000 Operator Interface
Enclosure System
Rev. A 8/07
Operator Interface
Enclosure Systems
Bulletin
CC3
Optional Accessories
NOTE: In addition to the accessories shown below, CC3000 enclosures also can be used with the CC4000 pedestal and keyboard tilt, the COMPACT® Pendant
Arm Series 2 mounting options, and the COMPACT Pendant Arm Series 4 System 50/60 mounting options. Also, the 200mm profile can use the Series 4 system,
with 80 mounting options. See these sections of the Product Catalog on hoffmanonline.com.
Accessory Mounting Brackets
Accessory mounting brackets are
used to install accessories into the
inside of the CC3000 enclosure.
Clipboard
The clipboard can be installed on
either side of the enclosure. All
mounting hardware and installation
instructions are included. Finish is
RAL 9006 white aluminum polyester
powder paint.
Command Handle
Aluminum handle. Ergonomic
design allows the operator
to swing the enclosure for a
comfortable working location.
Can be used with 200mm and
120mm depth profiles.
Catalog Number
Weight
ccMTGBRKT
0.3 lb
Catalog Number
Weight
ccLIPBD
1.3 lb
Catalog Number
Weight
ccCHDL
0.7 lb
Door Stop Kit
Kit is designed to hold the
door in the open position.
Door stop is stainless steel.
No drilling required for
installation. Used on 55mm
door with 200mm depth
profile.
OI-20
Catalog Number
Weight
ccDSK
0.3 lb
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
CC3000 Operator Interface
Enclosure System
Rev. A 8/07
Operator Interface
Enclosure Systems
Bulletin
CC3
Optional Accessories (Cont.)
Drive Access Door
Fan Mounting Bracket Kit
Four fan mounting brackets allow
for additional cooling capacity
inside the enclosure. Can be used
with small axial or radial fans.
Brackets are steel finished with
RAL 7035 light gray polyester
powder paint. Hardware included.
Keyboard Connector
Rigid connector between the
keyboard box and the enclosure.
Made of cast aluminum and
finished with RAL 9006 white
aluminum polyester powder paint.
Keyboard Drawer
Keyboard drawer provides a
smart solution for keyboard
storage. Keyboard and mouse
with connections included. Used
with 200mm depth profile.
Catalog Number
Description
Bulletin No.
Weight
CDACCDR
Door and installation hardware
C2
1.7 lb
Operator Interface
Enclosure Systems
Drive door can be installed only on 200mm
enclosures to access internal disk drives.
Finished with RAL 7035 light gray polyester
powder paint. Hinges are finished with
RAL 9005 black polyester powder paint.
Key-locking latch is included, along with all
installation hardware. Machining is required
for installation. Maintains Type 12 rating.
Contact your Hoffman representative for
details.
Catalog Number
Weight
ccFMB
0.3 lb
Catalog Number
Weight
ccKbc
1.5 lb
Catalog Number
Weight
ccKBD
9.8 lb
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-21
CC3000 Operator Interface
Enclosure System
Rev. A 8/07
Operator Interface
Enclosure Systems
Bulletin
CC3
Optional Accessories (Cont.)
Keyboard Straps
The keyboard straps are used for
keyboard support. The straps can
be stored under the enclosure
when not in use. Finish is RAL
9006 white aluminum polyester
powder paint.
Mouse Pad
The mouse pad has an incline
adjustment and has storage for
the mouse when not in use.
Mounting hardware and installation
instructions are included. Finish
is RAL 9006 white aluminum
polyester powder paint.
Pedestal
Pedestal can be mounted to the
floor or on accessory swivel
casters. Coupling and base are
finished with RAL 7035 light gray
polyester powder paint. Anodized
aluminum tube is 1000mm high
with a 45mm x 60mm tube cross
section. The enclosure coupling
has a 60mm x 60mm hole pattern.
NOTE: Casters can be found on
page OI-103.
OI-22
Catalog Number
Weight
cckbs
1.2 lb
Catalog Number
Weight
ccmspad
1.2 lb
Catalog Number
ccPED
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
CC3000 Operator Interface
Enclosure System
Rev. A 8/07
Operator Interface
Enclosure Systems
Bulletin
CC3
Optional Accessories (Cont.)
Spring Nut Fastener Package
The package includes 10 M5
spring nuts for component
mounting inside the enclosure.
The interface allows access to
programmable components
installed inside the enclosure
without opening the door. It
also can be used as a keyboard
or mouse connection.
Keyboard Compartment
Keyboard compartment has
same construction and finish as
enclosure bodies. Fits pendant
mount bodies when used with
the CTKBC single tilt; fits
pedestal mount bodies when
used with the CC3000 pedestal
(CCPED) and CCKBC rigid
keyboard connector.
Weight
ccM5SN
0.04 lb
Catalog Number
Cable Length (m)
Cable Length (ft.)
Weight
ccUSB
3.5
10.00
0.2 lb
Catalog Number
Product Weight
CKBC244812
12.5 lb
Keyboard Front Plate
Plate is 14 gauge steel finished
with RAL 7035 light gray
textured polyester powder paint
or Type 304 stainless steel with
a brushed finish. Available blank
or with TIP NEMA 4 Keyboard.
Includes mounting hardware.
Catalog Number
Description
Size A x B (mm)
Size A x B (in.)
Usable Area
M x N (mm)
Usable Area
M x N (in.)
Product Weight (lb)
C4KBFP2653
C4KBFP2653SS
C4KBKP2653
C4KBKP2653SS
Blank Steel
Blank Stainless Steel
With Keyboard Steel
With Keyboard Stainless Steel
203 x 439
203 x 439
203 x 439
203 x 439
7.99 x 17.28
7.99 x 17.28
7.99 x 17.28
7.99 x 17.28
169 x 405
169 x 405
169 x 405
169 x 405
6.65 x 15.94
6.65 x 15.94
6.65 x 15.94
6.65 x 15.94
3.7
4.0
4.1
4.5
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-23
Operator Interface
Enclosure Systems
USB Interface
Catalog Number
CC4000 Operator Interface
Enclosure System
Operator Interface
Enclosure Systems
Bulletin
CC4
This attractive family of operator interface enclosures The single and dual tilt mechanisms give the operator
sets a new standard for visual appeal coupled with
design flexibility and ease of use. It’s available in two
body styles, three configurations, and eight sizes. The
system’s capability for pendant or pedestal mount,
with or without provision for a keyboard, offers exceptional design flexibility.
control over adjustment and ergonomic positioning of
the enclosure and/or keyboard, depending on configuration. The tilt mechanisms are the only additional
components required for mounting the enclosure on
a pedestal and for adding a keyboard compartment
with either pedestal or pendant mount.
Extruded aluminum top and sides provide a quality
Pre-cut front plates are available to fit a wide variety
look while offering superior heat dissipation. Hinged
body models provide extra depth and allow rear access.
OI-24
of OI panels.
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
CC4000 Operator Interface
Enclosure System
Operator Interface
Enclosure Systems
Bulletin
CC4
Operator Interface
Enclosure Systems
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-25
CC4000 Operator Interface
Enclosure System
Operator Interface
Enclosure Systems
Bulletin
CC4
Application
Industry Standards
These highly aesthetically appealing operator interface enclosures
provide the ideal solution for applications requiring an attractive
appearance. Enclosures are designed to be used with flat screen OI
devices, lights, meters, gauges, and other similar equipment. They
are available with or without provision for keyboard compartments.
These enclosures are used with the unique curved CC4000 pedestal
or with the Hoffman COMPACT® Series 2, COMPACT Series 4
System 50 or 60, and CS600 pendant arms.
UL 508A, File No. E61997: Type 12
cUL CSA C22.2 No. 94, File No. E61997: Type 12
NEMA/EEMAC Type 12
IEC 60529, IP55
DIN 40050
Accessories
See the Accessories chapter.
Construction
• Extruded Type 6063 aluminum top and sides provide a quality
appearance and internal flexibility
• Body is available hinged or solid
• Optional rear covers can be hinged on either the right or left side
• Integral mounting system has extruded screw channels to facilitate
easy component installation
• Each size is designed to accommodate a range of flat screen
operator interface devices
• Oil-resistant gasket attached with oil-resistant adhesive
• High thermal conductivity for superior heat dissipation
Keyboard Compartment
Tilt Mechanism
Pedestal
Rear Hinged Cover
Lift-off Hinges for Hinged Body Versions
Finish
Enclosure vertical components are clear anodized aluminum;
horizontal components are aluminum painted RAL 7021 black
aluminum.
Steel front plates are RAL 7035 gray polyester powder paint.
Stainless steel front plates have a brushed finish.
Aluminum rear covers have a clear anodized brushed finish.
OI-26
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Operator Interface
Enclosure Systems
CC4000 Operator Interface
Enclosure System
Bulletin
CC4
CC4000 Enclosures
All body sizes and styles are available for pendant or pedestal
mounting with or without a keyboard. Hinged and solid bodies are
available in the sizes shown in the table. Hinged bodies offer extra
depth and rear access. Rear aluminum screw cover is standard.
Pendant Mount Enclosures
Use in pendant mounting applications where keyboard compartment
is not required.
Cutout in top for mounting with COMPACT® Series 2; COMPACT
Series 4 system 50 or 60; and CS600 pendant arms.
Operator Interface
Enclosure Systems
Pendant Mount
Catalog Number
CCC284014PN
CCC284020PN
CCC334014PN
CCC334020PN
CCC425320PN
CCC456029PN
CCC334026HPN
CCC425326HPN
A x B x C mm (in.)
Body Style
Usable Area
D x E (mm)
Usable Area
D x E (in.)
F (mm)
F (in.)
Product
Weight (lb)
280 x 400 x 140
(11.02 x 15.75 x 5.51)
280 x 400 x 200
(11.02 x 15.75 x 7.87)
330 x 400 x 140
(12.99 x 15.75 x 5.51)
330 x 400 x 200
(12.99 x 15.75 x 7.87)
425 x 530 x 200
(16.73 x 20.87 x 7.87)
450 x 600 x 290
(17.72 x 23.62 x 11.42)
330 x 400 x 268
(12.99 x 15.75 x 10.55)
425 x 530 x 268
(16.73 x 20.87 x 10.55)
Solid
185 x 275
7.28 x 10.83
—
—
16.4
Solid
185 x 275
7.28 x 10.83
—
—
22.0
Solid
235 x 275
9.25 x 10.83
—
—
17.5
Solid
235 x 275
9.25 x 10.83
—
—
23.0
Solid
330 x 405
12.99 x 15.94
—
—
33.1
Solid
355 x 475
13.98 x 18.70
—
—
44.0
Hinged
235 x 275
9.25 x 10.83
128
5.04
30.0
Hinged
330 x 405
12.99 x 15.94
128
5.04
41.0
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-27
Operator Interface
Enclosure Systems
CC4000 Operator Interface
Enclosure System
Bulletin
CC4
Pendant Mount Enclosures with Keyboard
Compartment Capability
Use in pendant mounting applications where a keyboard
compartment is required.
• Cutout in top for mounting with COMPACT® Series 2;
COMPACT Series 4 system 50 or 60; and CS600 pendant arms
• Cutout on bottom for keyboard tilt mechanism
• Order tilt mechanism and keyboard compartment separately
Pendant Mount
Catalog Number
CCC284014PNK
CCC284020PNK
CCC334014PNK
CCC334020PNK
CCC425320PNK
CCC456029PNK
CCC334026HPNK
CCC425326HPNK
A x B x C mm (in.)
Body Style
Usable Area
D x E (mm)
Usable Area
D x E (in.)
F (mm)
F (in.)
Product
Tilt Mechanism Weight (lb)
280 x 400 x 140
(11.02 x 15.75 x 5.51)
280 x 400 x 200
(11.02 x 15.75 x 7.87)
330 x 400 x 140
(12.99 x 15.75 x 5.51)
330 x 400 x 200
(12.99 x 15.75 x 7.87)
425 x 530 x 200
(16.73 x 20.87 x 7.87)
450 x 600 x 290
(17.72 x 23.62 x 11.42)
330 x 400 x 268
(12.99 x 15.75 x 10.55)
425 x 530 x 268
(16.73 x 20.87 x 10.55)
Solid
185 x 275
7.28 x 10.83
—
—
CTKBC
16.4
Solid
185 x 275
7.28 x 10.83
—
—
CTKBC
22.0
Solid
235 x 275
9.25 x 10.83
—
—
CTKBC
17.5
Solid
235 x 275
9.25 x 10.83
—
—
CTKBC
23.0
Solid
330 x 405
12.99 x 15.94
—
—
CTKBC
33.1
Solid
355 x 475
13.98 x 18.70
—
—
CTKBC
44.0
Hinged
235 x 275
9.25 x 10.83
128
5.04
CTKBC
30.0
Hinged
330 x 405
12.99 x 15.94
128
5.04
CTKBC
41.0
Pedestal Mount Enclosure
Use in pedestal mounting applications with
the CPCC4 pedestal, either with or without a
keyboard.
• Tilt mechanism required for connecting
enclosure and pedestal
• Cutout on bottom for tilt mechanism mounting
• Order tilt mechanism and keybaord
compartment (if needed) separately
Pedestal Mount
Catalog Number A x B x C mm (in.)
Body
Style
Usable Area
D x E (mm)
Usable Area
D x E (in.)
F (mm)
F (in.)
Product
Tilt Mechanism
Tilt Mechanism Weight
without Keyboard with Keyboard (lb)
CCC284014PD
Solid
185 x 275
7.28 x 10.83
—
—
CTKBC
CTKBCP
16.4
Solid
185 x 275
7.28 x 10.83
—
—
CTKBC
CTKBCP
22.0
Solid
235 x 275
9.25 x 10.83
—
—
CTKBC
CTKBCP
17.5
Solid
235 x 275
9.25 x 10.83
—
—
CTKBC
CTKBCP
23.0
Solid
330 x 405
12.99 x 15.94
—
—
CTKBC
CTKBCP
33.0
Solid
355 x 475
13.98 x 18.70
—
—
CTKBC
CTKBCP
44.0
Hinged
235 x 275
9.25 x 10.83
128
5.04
CTKBC
CTKBCP
30.0
Hinged
330 x 405
12.99 x 15.94
128
5.04
CTKBC
CTKBCP
41.0
CCC284020PD
CCC334014PD
CCC334020PD
CCC425320PD
CCC456029PD
CCC334026HPD
CCC425326HPD
OI-28
280 x 400 x 140
(11.02 x 15.75 x 5.51)
280 x 400 x 200
(11.02 x 15.75 x 7.87)
330 x 400 x 140
(12.99 x 15.75 x 5.51)
330 x 400 x 200
(12.99 x 15.75 x 7.87)
425 x 530 x 200
(16.73 x 20.87 x 7.87)
450 x 600 x 290
(17.72 x 23.62 x 11.41)
330 x 400 x 268
(12.99 x 15.75 x 10.55)
425 x 530 x 268
(16.73 x 20.87 x 10.55)
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Operator Interface
Enclosure Systems
CC4000 Operator Interface
Enclosure System
Bulletin
CC4
Front Plate
Front plates are 14 gauge steel
finished with RAL 7035 light gray
polyester powder paint. Stainless
steel front plates have a brushed
finish.
NOTE: Hoffman can provide preconfigured front plates to meet your
specific requirements. Contact your
local Hoffman Sales Representative for
more information.
Steel Type
Panel Size
D x E (mm)
Panel Size
D x E (inch)
Usable Area
M x N (mm)
Usable Area
M x N (inch)
Fits Enclosure (mm)
Fits Enclosure (inch)
Product Weight
(lb)
C4FP2840
C4FP2840SS
C4FP3340
C4FP3340SS
C4FP4253
C4FP4253SS
C4FP4560
C4FP4560SS
Steel
Stainless Steel
Steel
Stainless Steel
Steel
Stainless Steel
Steel
Stainless Steel
219 x 309
219 x 309
269 x 309
269 x 309
364 x 439
364 x 439
389 x 509
389 x 509
8.62 x 12.17
8.62 x 12.17
10.59 x 12.17
10.59 x 12.17
14.33 x 17.28
14.33 x 17.28
15.31 x 20.04
15.31 x 20.04
275 x 185
275 x 185
275 x 235
275 x 235
406 x 330
406 x 330
475 x 355
475 x 355
10.83 x 7.28
10.83 x 7.28
10.83 x 9.25
10.83 x 9.25
15.94 x 12.99
15.94 x 12.99
18.70 x 13.98
18.70 x 13.98
280 x 400 x 140/200
280 x 400 x 140/200
330 x 400 x 140/200/268
330 x 400 x 140/200/268
425 x 530 x 200
425 x 530 x 200
450 x 600 x 290
450 x 600 x 290
11.02 x 15.75 x 5.51/7.87
11.02 x 15.75 x 5.51/7.87
12.99 x15.75 x 5.51/7.87/10.55
12.99 x 15.75 x 5.51/7.87/10.55
16.73 x 20.87 x 7.87
16.73 x 20.87 x 7.87
17.72 x 23.62 x 11.42
17.72 x 23.62 x 11.42
3.5
4.0
4.0
4.4
6.5
7.5
8.0
9.0
Pre-Cut Front Plate
Catalog Number Steel Type
Manufacturer
Model
C4CSK2840F1
C4CSK2840F1SS
C4CSK2840F2
C4CSK2840F2SS
C4CSK2840F3
C4CSK2840F3SS
C4CSK2840F4
C4CSK2840F4SS
C4CSK3340F1
C4CSK3340F1SS
C4CSK3340F2
C4CSK3340F2SS
C4CSK3340F3
C4CSK3340F3SS
C4CSK3340F4
C4CSK3340F4SS
C4CSK3340F5
C4CSK3340F5SS
C4CSK4253F1
C4CSK4253F1SS
C4CSK4253F2
C4CSK4253F2SS
C4CSK4253F3
Allen-Bradley
Allen-Bradley
Allen-Bradley
Allen-Bradley
Allen-Bradley
Allen-Bradley
TCP
TCP
Eaton Cutler-Hammer
Eaton Cutler-Hammer
TCP
TCP
Allen-Bradley
Allen-Bradley
Allen-Bradley
Allen-Bradley
Allen-Bradley
Allen-Bradley
Eaton Cutler-Hammer
Eaton Cutler-Hammer
Eaton Cutler-Hammer
Eaton Cutler-Hammer
TCP
PanelView 600
PanelView 600
PanelView 550
PanelView 550
PanelView 550/600TS
PanelView 550/600TS
Quickpanel Jr.
Quickpanel Jr.
PanelMate 1500
PanelMate 1500
Quickpanel Mono EL
Quickpanel Mono EL
PanelView 600KP
PanelView 600KP
PanelView 550KP
PanelView 550KP
PanelView 550/600TS
PanelView 550/600TS
PanelMate 3000 TP
PanelMate 3000 TP
PanelMate 3000 TS
PanelMate 3000 TS
Quickpanel Color
STN/TFT
Quickpanel Color
STN/TFT
INX
INX
PanelView 900TS
PanelView 900TS
PanelView 900KP
PanelView 900KP
PanelView 1000TS
PanelView 1000TS
PanelView 1000KP
PanelView 1000KP
AB6180
AB6180
Steel
Stainless Steel
Steel
Stainless Steel
Steel
Stainless Steel
Steel
Stainless Steel
Steel
Stainless Steel
Steel
Stainless Steel
Steel
Stainless Steel
Steel
Stainless Steel
Steel
Stainless Steel
Steel
Stainless Steel
Steel
Stainless Steel
Steel
C4CSK4253F3SS Stainless Steel
TCP
C4CSK4253F4
C4CSK4253F4SS
C4CSK4253F5
C4CSK4253F5SS
C4CSK4253F6
C4CSK4253F6SS
C4CSK4253F7
C4CSK4253F7SS
C4CSK4253F8
C4CSK4253F8SS
C4CSK4560F1
C4CSK4560F1SS
Ann Arbor
Ann Arbor
Allen-Bradley
Allen-Bradley
Allen-Bradley
Allen-Bradley
Allen-Bradley
Allen-Bradley
Allen-Bradley
Allen-Bradley
Allen-Bradley
Allen-Bradley
Steel
Stainless Steel
Steel
Stainless Steel
Steel
Stainless Steel
Steel
Stainless Steel
Steel
Stainless Steel
Steel
Stainless Steel
Panel Size Panel Size
D x E (mm) D x E (inch)
Fits Enclosure
(mm)
Fits Enclosure
(inch)
Wt.
(lb)
219 x 309
219 x 309
219 x 309
219 x 309
219 x 309
219 x 309
219 x 309
219 x 309
269 x 309
269 x 309
269 x 309
269 x 309
269 x 309
269 x 309
269 x 309
269 x 309
269 x 309
269 x 309
364 x 439
364 x 439
364 x 439
364 x 439
364 x 439
8.62 x 12.17
8.62 x 12.17
8.62 x 12.17
8.62 x 12.17
8.62 x 12.17
8.62 x 12.17
8.62 x 12.17
8.62 x 12.17
10.59 x 12.17
10.59 x 12.17
10.59 x 12.17
10.59 x 12.17
10.59 x 12.17
10.59 x 12.17
10.59 x 12.17
10.59 x 12.17
10.59 x 12.17
10.59 x 12.17
14.33 x 17.28
14.33 x 17.28
14.33 x 17.28
14.33 x 17.28
14.33 x 17.28
280 x 400 x 140/200
280 x 400 x 140/200
280 x 400 x 140/200
280 x 400 x 140/200
280 x 400 x 140/200
280 x 400 x 140/200
280 x 400 x 140/200
280 x 400 x 140/200
330 x 400 x 140/200/268
330 x 400 x 140/200/268
330 x 400 x 140/200/268
330 x 400 x 140/200/268
330 x 400 x 140/200/268
330 x 400 x 140/200/268
330 x 400 x 140/200/268
330 x 400 x 140/200/268
330 x 400 x 140/200/268
330 x 400 x 140/200/268
425 x 530 x 200/268
425 x 530 x 200/268
425 x 530 x 200/268
425 x 530 x 200/268
425 x 530 x 200/268
11.02 x 15.75 x 5.51/7.87
11.02 x 15.75 x 5.51/7.87
11.02 x 15.75 x 5.51/7.87
11.02 x 15.75 x 5.51/7.87
11.02 x 15.75 x 5.51/7.87
11.02 x 15.75 x 5.51/7.87
11.02 x 15.75 x 5.51/7.87
11.02 x 15.75 x 5.51/7.87
12.99 x 15.75 x 5.51/7.87/10.55
12.99 x 15.75 x 5.51/7.87/10.55
12.99 x 15.75 x 5.51/7.87/10.55
12.99 x 15.75 x 5.51/7.87/10.55
12.99 x 15.75 x 5.51/7.87/10.55
12.99 x 15.75 x 5.51/7.87/10.55
12.99 x 15.75 x 5.51/7.87/10.55
12.99 x 15.75 x 5.51/7.87/10.55
12.99 x 15.75 x 5.51/7.87/10.55
12.99 x 15.75 x 5.51/7.87/10.55
16.73 x 20.87 x 7.87/10.55
16.73 x 20.87 x 7.87/10.55
16.73 x 20.87 x 7.87/10.55
16.73 x 20.87 x 7.87/10.55
16.73 x 20.87 x 7.87/10.55
3.5
4.0
3.5
4.0
3.5
4.0
3.5
4.0
4.0
4.4
4.0
4.4
4.0
4.4
4.0
4.4
4.0
4.0
6.5
7.5
6.5
7.5
6.5
364 x 439
14.33 x 17.28 425 x 530 x 200/268
16.73 x 20.87 x 7.87/10.55
7.5
364 x 439
364 x 439
364 x 439
364 x 439
364 x 439
364 x 439
364 x 439
364 x 439
364 x 439
364 x 439
389 x 509
389 x 509
14.33 x 17.28
14.33 x 17.28
14.33 x 17.28
14.33 x 17.28
14.33 x 17.28
14.33 x 17.28
14.33 x 17.28
14.33 x 17.28
14.33 x 17.28
14.33 x 17.28
15.31 x 20.04
15.31 x 20.04
16.73 x 20.87 x 7.87/10.55
16.73 x 20.87 x 7.87/10.55
16.73 x 20.87 x 7.87/10.55
16.73 x 20.87 x 7.87/10.55
16.73 x 20.87 x 7.87/10.55
16.73 x 20.87 x 7.87/10.55
16.73 x 20.87 x 7.87/10.55
16.73 x 20.87 x 7.87/10.55
16.73 x 20.87 x 7.87/10.55
16.73 x 20.87 x 7.87/10.55
17.72 x 23.62 x 11.42
17.72 x 23.62 x 11.42
6.5
7.5
6.5
7.5
6.5
7.5
6.5
7.5
6.5
7.5
8.0
9.0
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
425 x 530 x 200/268
425 x 530 x 200/268
425 x 530 x 200/268
425 x 530 x 200/268
425 x 530 x 200/268
425 x 530 x 200/268
425 x 530 x 200/268
425 x 530 x 200/268
425 x 530 x 200/268
425 x 530 x 200/268
450 x 600 x 290
450 x 600 x 290
© 2007 Hoffman Enclosures Inc.
OI-29
Operator Interface
Enclosure Systems
Catalog
Number
Operator Interface
Enclosure Systems
CC4000 Operator Interface
Enclosure System
Keyboard Compartment
Keyboard compartment has
same construction and finish as
enclosure bodies. Fits pendant
mount bodies when used with
the CTKBC single tilt; fits
pedestal mount bodies when
used with the CTKBCP dual tilt
mechanism.
Bulletin
CC4
AxBxC
Catalog Number mm (in.)
Opening Size Opening Size Product
D x E (mm)
D x E (in.)
Weight
CKBC26535
190 x 427
7.48 x 16.81
11.4 lb
190 x 495
7.48 x 19.49
12.0 lb
CKBC26605
300 x 500 x 52
(11.81 x 19.68 x 2.08)
300 x 570 x 52
(11.81 x 22.44 x 2.05)
Keyboard Front Plate
Plate is 14 gauge steel finished
with RAL 7035 light gray
textured polyester powder paint
or Type 304 stainless steel with
a brushed finish. Available blank
or with TIP NEMA 4 Keyboard.
Includes mounting hardware.
Catalog Number
Description
Size A x B (mm)
Size A x B (in.)
Usable Area
M x N (mm)
Usable Area
M x N (in.)
Fits Keyboard
Compartment
Product Weight
C4KBFP2653
C4KBFP2653SS
C4KBKP2653
C4KBKP2653SS
C4KBFP2660
C4KBFP2660SS
C4KBKP2660
C4KBKP2660SS
Blank Steel
Blank Stainless Steel
With Keyboard Steel
With Keyboard Stainless Steel
Blank Steel
Blank Stainless Steel
With Keyboard Steel
With Keyboard Stainless Steel
203 x 439
203 x 439
203 x 509
203 x 509
203 x 439
203 x 439
203 x 509
203 x 509
7.99 x 17.28
7.99 x 17.28
7.99 x 20.04
7.99 x 20.04
7.99 x 17.28
7.99 x 17.28
7.99 x 20.04
7.99 x 20.04
169 x 405
169 x 405
169 x 475
169 x 475
169 x 405
169 x 405
169 x 475
169 x 475
6.65 x 15.94
6.65 x 15.94
6.65 x 18.70
6.65 x 18.70
6.65 x 15.94
6.65 x 15.94
6.65 x 18.70
6.65 x 18.70
264 x 530
264 x 530
264 x 600
264 x 600
264 x 530
264 x 530
264 x 600
264 x 600
3.7 lb
4.0 lb
5.7 lb
6.0 lb
4.1 lb
4.5 lb
6.1 lb
6.5 lb
OI-30
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
CC4000 Operator Interface
Enclosure System
Operator Interface
Enclosure Systems
Bulletin
CC4
Tilt Mechanism
Catalog
Number
Type
Use With
Product Weight
CTKBC
Single
5.8 lb
CTKBCP
Dual
Pendant mount with keyboard
Pedestal mount without keyboard
Pedestal mount with keyboard
Operator Interface
Enclosure Systems
Allows operator to adjust enclosure and keyboard for maximum
convenience and comfort. Cast aluminum construction. Finish is
RAL 7035 light gray polyester powder paint.
• Single tilt connects enclosure with keyboard in pendant mount
applications or enclosure with pedestal in floor mount applications.
• Allows enclosure to tilt back 20º max. when pedestal mounted.
• Allows keyboard to adjust from horizontal to 45º down when
pendant mounted.
• Dual tilt connects pedestal, enclosure, and keyboard.
• Allows enclosure to tilt back 20º max.
• Allows keyboard to adjust infinitely between enclosure and
pedestal.
6.6 lb
Hinged Rear Cover
Covers can be mounted with
hinge on left or right side of
enclosure. One or two quarterturn latches, depending on size.
Made of 3mm-thick aluminum
with a clear anodized brushed
finish. Includes mounting
hardware and grounding kit.
Catalog Number
Number of Latches
Fits Enclosure (mm) Product Weight
CCH2840
CCH3340
CCH4253
CCH4560
One
One
Two
Two
280 x 400
330 x 400
425 x 530
450 x 600
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
2.2 lb
2.6 lb
4.3 lb
5.0 lb
OI-31
Operator Interface
Enclosure Systems
CC4000 Operator Interface
Enclosure System
Lift-off Hinge Kit
Use when quick removal of
the rear section of a hinged
enclosure is desired. Contains
one set of hinges to convert the
hinges on the enclosure to a liftoff configuration.
Pedestal
Pedestal can be bolted to the
floor or mounted on accessory
swivel casters. Center channel
is 2 x 3 in. with rear access
strip for routing wires. Requires
single or dual tilt for enclosure
mounting. Finished with RAL
7035 light gray polyester powder
paint.
Bolt-Down Kit
Bolt-down kit is used to securely
mount pedestal CPCC4 to the
floor. Kit includes four brackets
and mounting hardware.
OI-32
Bulletin
CC4
Catalog Number
Description
Product Weight
CHLOCC4
Lift-off Hinge Kit
0.2 lb
Catalog Number
Description
CPCC4
Two piece cast aluminum
Catalog Number
Description
CPBDK
Bolt-Down Kit
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Operator Interface
Enclosure Systems
CC4000 Operator Interface
Enclosure System
Swivel Casters for Pedestal Base
Casters mount to the bottom of
the CPCC4 pedestal. Kit includes
four casters and mounting
hardware.
Catalog
Number
Description
CPCC4SC Four swivel
casters
Bulletin
CC4
Load
Installed Installed Wheel Wheel Rating
Height
Height
Dia.
Dia.
Per Set
(mm)
(in.)
(mm) (in.) (Kg)
Load
Rating
Per Set
(lb)
100
400
3.9
75
3.0
180
Operator Interface
Enclosure Systems
Levelers for Pedestal Base
Catalog Number
Description
CPCC4L
Four levelers for pedestal base
Levelers mount to the bottom
of the CPCC4 pedestal where
leveling is required. Kit contains
four levelers and mounting
hardware. Cannot be used
with casters or in bolt-down
installations.
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-33
CONCEPT® Operator Interface
Enclosure System
Operator Interface
Enclosure Systems
Bulletin
C2
These operator interface enclosures are appropriate
for applications incorporating flat-screen humanmachine interface (HMI) devices, pushbuttons, and
other similar devices. It’s available with three depth
choices. The system’s capability for pendent or
pedestal mounting offers exceptional design
flexibility. Accessory colors are available to match the
most popular HMI devices.
OI-34
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
CONCEPT® Operator Interface
Enclosure System
Operator Interface
Enclosure Systems
Bulletin
C2
Operator Interface
Enclosure Systems
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-35
CONCEPT® Operator Interface
Enclosure System
Rev. A 8/07
Application
Accessories
CONCEPT Operator Interface Enclosures are appropriate for
applications incorporating flat-screen OI devices, pushbuttons, lights,
meters, gauges, and other similar devices. Enclosures are designed to
be pendant- or pedestal-mounted.
See Accessories chapter.
Features
• Pre-drilled hole in top for mounting using a Series 2 or Series 4
50/60 pendant arm
• Pedestal mounting when enclosure is inverted
• Integral handle extrusions have a comfort grip that extends the
length of the profile
• Hinged rear door has a single-point latch, seamless foam-in-place
gasket, and panel studs.
• Four accent colors (blue, purple, red, turquoise) for integral
handle extrusions and end caps match the most popular operator
interface color schemes
• Aluminum front plate
Operator Interface
Enclosure Systems
Bulletin
C2
Corrosion Inhibitors
Electric Heaters
Fan Cooling Products
Touch-Up Paint (ATPG7035)
Modification Services Program
You can customize this product to your unique requirements by
specifying from these options:
• Over 100 standard finish colors and textures
• Holes and cutouts in body and doors
• Standard accessories installed by Hoffman
To order, contact your local Hoffman sales representative.
NOTE: For information about modifications outside the scope of the
Modification Services program, contact your Hoffman sales representative.
Construction
• Body manufactured from 14 gauge steel
• Front plate is .125-inch aluminum
Finish
Enclosure body and front plate are finished with RAL
7035 light gray polyester powder paint. Standard
handle extrusions and end caps are finished with RAL
9005 black polyester powder paint.
Industry Standards
UL 508A, File Number E61997: Type 4, 12
NEMA Type 4, 12
cUL CSA C22.2 No. 94, File No. E61997: Type 4, 12
IEC 60529, IP66
OI-36
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Operator Interface
Enclosure Systems
CONCEPT® Operator Interface
Enclosure System
Bulletin
C2
Standard Sizes CONCEPT Operator Interface Enclosures
AxBxC
mm (in.)
CP253512
250 x 350 x 120
(9.84 x 13.78 x 4.72)
300 x 400 x 120
(11.81 x 15.75 x 4.72)
325 x 350 x 120
(12.80 x 13.78 x 4.72)
350 x 450 x 120
(13.78 x 17.72 x 4.72)
350 x 450 x 180
(13.78 x 17.72 x 7.09)
350 x 450 x 300
(13.78 x 17.72 x 11.81)
375 x 400 x 120
(14.76 x 15.75 x 4.72)
400 x 500 x 120
(15.75 x 19.69 x 4.72)
400 x 500 x 180
(15.75 x 19.69 x 7.09)
400 x 500 x 300
(15.75 x 19.68 x 11.81)
425 x 450 x 120
(16.73 x 17.72 x 4.72)
425 x 450 x 180
(16.73 x 17.72 x 7.09)
425 x 450 x 300
(16.73 x 17.72 x 11.81)
450 x 550 x 120
(17.72 x 21.65 x 4.72)
450 x 550 x 180
(17.72 x 21.65 x 7.09)
450 x 550 x 300
(17.72 x 21.65 x 11.81)
475 x 500 x 120
(18.70 x 19.69 x 4.72)
475 x 500 x 180
(18.70 x 19.69 x 7.09)
475 x 500 x 300
(18.70 x 19.68 x 11.81)
480 x 600 x 120
(18.90 x 23.62 x 4.72)
480 x 600 x 180
(18.90 x 23.62 x 7.09)
480 x 600 x 300
(18.90 x 23.62 x 11.81)
525 x 550 x 120
(20.67 x 21.65 x 4.72)
525 x 550 x 180
(20.67 x 21.65 x 7.09)
525 x 550 x 300
(20.67 x 21.65 x 11.81)
555 x 600 x 120
(21.85 x 23.62 x 4.72)
555 x 600 x 180
(21.85 x 23.62 x 7.09)
555 x 600 x 300
(21.85 x 23.62 x 11.81)
CP304012
CP323512
CP354512
CP354518
CP354530
CP374012
CP405012
CP405018
CP405030
CP424512
CP424518
CP424530
CP455512
CP455518
CP455530
CP475012
CP475018
CP475030
CP486012
CP486018
CP486030
CP525512
CP525518
CP525530
CP556012
CP556018
CP556030
Front
Opening
M (mm)
Front
Opening
M (in.)
Front
Opening
N (mm)
Front
Opening
N (in.)
Front Plate
D (mm)
Front Plate
D (in.)
Front Plate
E (mm)
Front Plate
E (in.)
Product
Weight (lb)
210
8.27
280
11.02
250
9.86
361
14.22
10.5
260
10.24
330
12.99
330
12.99
411
16.19
14.9
285
11.22
280
11.02
325
12.81
361
14.22
16.5
310
12.20
380
14.96
350
13.79
461
18.16
20.0
310
12.20
380
14.96
350
13.79
461
18.16
22.3
310
12.20
380
14.96
350
13.79
461
18.16
26.9
335
13.19
330
12.99
375
14.78
411
16.19
20.0
360
14.17
430
16.93
400
15.76
511
20.13
24.3
360
14.17
430
16.93
400
15.76
511
20.13
26.5
360
14.17
430
16.93
400
15.76
511
20.13
30.9
385
15.16
380
14.96
425
16.75
461
18.16
23.9
385
15.16
380
14.96
425
16.75
461
18.16
25.8
385
15.16
380
14.96
425
16.75
461
18.16
30.2
410
16.14
480
18.90
450
17.73
561
22.10
28.6
410
16.14
480
18.90
450
17.73
561
22.10
31.0
410
16.14
480
18.90
450
17.73
561
22.10
35.8
435
17.13
430
16.93
475
18.72
511
20.13
28.0
435
17.13
430
16.93
475
18.72
511
20.13
30.2
435
17.13
430
16.93
475
18.72
511
20.13
34.6
440
17.32
530
20.87
480
18.90
611
24.06
32.2
440
17.32
530
20.87
480
18.90
611
24.06
34.6
440
17.32
530
20.87
480
18.90
611
24.06
39.4
485
19.09
480
18.90
525
20.68
561
22.10
32.5
485
19.09
480
18.90
525
20.68
561
22.10
34.9
485
19.09
480
18.90
525
20.68
561
22.10
39.7
515
20.28
530
20.87
555
21.86
611
24.06
36.8
515
20.28
530
20.87
555
21.86
611
24.06
38.8
515
20.28
530
20.87
555
21.86
611
24.06
43.6
Four accent colors are offered for handle extrusions and end caps: Blue, purple, red, and turquoise. To order a color, add the first letter of the color (B, P, R, or T) to the end of any enclosure
catalog number.
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-37
Operator Interface
Enclosure Systems
Catalog
Number
CONCEPT® Operator Interface
Enclosure System
Operator Interface
Enclosure Systems
Bulletin
C2
Accent Colors
Four accent colors are offered for the integral handle extrusions and
end caps. Blue, purple, red, and turquoise are available. To order the
color of your choice, add the first letter of the color (B, P, R, or T)
to the end of any enclosure catalog number
Accessory Handle Kit
Catalog Number
Description
CHDLK
One pair of handles and mounting hardware 1.7
Handles can be installed on the
integral handle extrusions or the
bottom of the enclosure. Handle
length is 13.40 inches and can be
cut down to fit smaller enclosure
sizes. Aluminum tube is finished
with RAL 9005 black polyester
powder paint. Plastic ends are
RAL 9005 black. Kit includes one
pair of handles and all mounting
hardware.
Clipboard/White Board
The clipboard/white board
can be installed on either
handle extrusion. All mounting
hardware and installation
instructions are included.
Finished with white paint. Dry
erase markers can be used on
the front writing surface.
OI-38
Product Weight (lb)
Catalog Number
Description
Product Weight (lb)
CCLPBRD
Clipboard and mounting hardware
2
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Rev. A 7/07
CONCEPT® Operator Interface
Enclosure System
Drive Access Door
Keyboard Tray
Tray attaches to keyboard
frame. Provides a surface for a
PC mouse as well as a platform
for a keyboard. Aluminum
construction finished with RAL
7035 light gray polyester powder
paint.
Bulletin
C2
Catalog Number
Description
Product Weight (lb)
CDACCDR
Door and installation hardware
1.7
Operator Interface
Enclosure Systems
Drive door can be installed on
enclosures to access internal
disk drives. Key-locking latch
is included. An installation
template is included in the
installation instructions. All
installation hardware is included.
Finished with RAL 7035 light
gray polyester powder paint.
Hinges are finished with RAL
9005 black polyester powder
paint. Maintains Type 12 rating
for 180mm- and 300mm-deep
enclosures.
Operator Interface
Enclosure Systems
Catalog Number
Material
Product Weight (lb)
CKBT
Aluminum
3.0
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-39
CONCEPT® Operator Interface
Enclosure System
Operator Interface
Enclosure Systems
Bulletin
C2
Replacement Front Plate
Aluminum plate is .125 inch thick. Finish is RAL 7035 light gray
polyester powder paint. Mounting hardware is included.
Catalog Number
D (mm)
D (in.)
E (mm)
E (in.)
Fits Enclosure A x B (mm) Fits Enclosure A x B (in.)
Weight (lb)
CPFP2535
CPFP3040
CPFP3235
CPFP3545
CPFP3740
CPFP4050
CPFP4245
CPFP4555
CPFP4750
CPFP4860
CPFP5255
CPFP5560
250
300
325
350
375
400
425
450
475
480
525
555
9.84
11.81
12.80
13.78
14.76
15.75
16.73
17.72
18.70
18.90
20.67
21.85
361
411
361
461
411
511
461
561
511
611
561
611
14.22
16.19
14.22
18.16
16.19
20.13
18.16
22.10
20.13
24.06
22.10
24.06
250 x 350
300 x 400
325 x 350
350 x 450
375 x 400
400 x 500
425 x 450
450 x 550
475 x 500
480 x 600
525 x 550
555 x 600
1.7
2.4
2.3
3.1
3.0
3.9
3.8
4.8
4.7
5.6
5.6
6.5
Support Bracket
Support bracket provides extra rigidity in 180mm-deep enclosures
that are either pendant- or pedestal-mounted. The bracket mounts
in the top or bottom of the enclosure; drilling is required (drill
points included on enclosure). The support bracket is not required
for 120mm-deep enclosures.
OI-40
9.84 x 13.78
11.81 x 15.75
12.80 x 13.78
13.78 x 17.72
14.76 x 15.75
15.75 x 19.68
16.73 x 17.72
17.72 x 21.65
18.70 x 19.68
18.90 x 23.62
20.67 x 21.65
21.85 x 23.62
Catalog Number
Description
Product Weioght (lb)
CSB180
One bracket per package
1.8
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Operator Interface
Enclosure Systems
CONCEPT® Operator Interface
Enclosure System
Door Panel
Catalog Number
CONCEPT OI door panels
are used for mounting in the
rear door of a CONCEPT OI
enclosure. Panels are made
of 12 or 14 gauge steel (see
table). Steel panels are painted
white. Conductive panels are
galvanized.
Kit provides a means of attaching
a grounding conductor to an
enclosure. Kit consists of two
copper wires with all installation
hardware and instructions
included. Wires are insulated.
C2
Gauge
D
E
Steel
Conductive Steel
Conductive mm
in.
mm
in.
CP2535
CP2535g
14
12
131
5.18
232
9.14
CP3040
CP3040g
14
12
181
7.15
282
11.11
CP3235
CP3235g
14
12
206
8.13
232
9.14
CP3545
CP3545g
14
12
232
9.12
332
13.08
CP3740
CP3740g
14
12
256
10.10
282
11.11
CP4050
CP4050g
12
12
281
11.09
382
15.04
CP4245
CP4245g
12
12
306
12.07
332
13.08
CP4555
CP4555g
12
12
331
13.05
432
17.01
CP4750
CP4750g
12
12
356
14.04
382
15.04
CP4860
CP4860g
12
12
361
14.23
482
18.98
CP5255
CP5255g
12
12
407
16.01
432
17.01
CP5560
CP5560g
12
12
436
17.19
482
18.98
Catalog Number
Description
CCGK
Grounding Kit
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-41
Operator Interface
Enclosure Systems
Grounding Kit
Bulletin
COMPACT® CCI Operator Interface
Enclosure System
Operator Interface
Enclosure Systems
Bulletin
CC1
COMPACT CCI Operator Interface
enclosures provide control systems
designers with additional options for
wall, pedestal, or pendant mounted
enclosures. CCI enclosures are designed
to house a variety of machine control
components and systems. Constructed
of rugged cast aluminum, these durable
enclosures are suitable for harsh
industrial and process environments.
They are impact-resistant and have a
deep front visor that protects
components mounted on the front
plate.
Eight sizes of CCI enclosures are
available, with outside dimensions
ranging from 200 x 230 x 130mm to
600 x 310 x 230mm. Optional panels,
DIN rails, hinges, and handles are also
available as accessories.
OI-42
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
COMPACT® CCI Operator Interface
Enclosure System
Operator Interface
Enclosure Systems
Bulletin
CC1
Operator Interface
Enclosure Systems
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-43
Operator Interface
Enclosure Systems
COMPACT® CCI Operator Interface
Enclosure System
Bulletin
CC1
Accessories
See Accessories chapter.
Corrosion Inhibitors
DIN Type Rails
Electric Heater
Fan Cooling Products
Panels
Terminal Kit Assembly
Touch-Up Paint (ATPPY61)
Handle Kit
Application
Operator Interface enclosures serve as machine control enclosures
for electrical controls and other components that are located in
dirty and occasionally corrosive environments. These enclosures
also protect controls from impact or accidental contact. Multiple
mounting provisions (wall, pedestal, or suspension arm) and full
front viewing panels provide for ideal operator interface. A variety of
enclosure sizes are available to suit a wide range of applications.
Construction
• Cast aluminum body and cover frame provides impact-resistance
and strength (enclosure is appropriate for pendant arm mounting
without additional support)
• Straight and offset cover frame around front of enclosure
shields external components mounted on front mounting plate
(pushbuttons, keypads, etc.) from accidental contact
• Removable front cover frame is attached with slotted machine
screws
• Aluminum front mounting plate (3mm thick) is removable; plate can
be machined to fit user’s specifications
• Oil-resistant gasket attached with oil-resistant adhesive
• Optional aluminum handles for enclosures mounted on pendant
arms or for carrying
• Optional hinges for front cover frame
Finish
Enclosure cover frame is textured black; body is ANSI 61 gray and
front plate is clear anodized aluminum with brushed finish.
Catalog Number
Description
Weight (lb)
ccch150
CCCH220
ccch300
150mm handle
220mm handle
300mm handle
0.3
0.3
0.3
Hinge Kit
Catalog Number
Weight (lb)
ccahk
0.1
Industry Standards
UL 508A, File Number E61997: Type 4, 4X, 12, 13
NEMA/EEMAC Type 4, 4X, 12, 13
CSA File Number 42186: Type 4, 4X, 12, 13
IEC 60529, IP65
DIN 40050
Panels
Catalog Number
CCAP2023
CCAP4031
CCAP3323
CCAP6031
Panel Size
mm (in.)
Fits Enclosure Catalog
Number
Weight (lb)
185 x 215
(7.29 x 8.47)
387 x 294
(15.25 x 11.58)
315 x 215
(12.41 x 8.47)
585 x 294
(23.05 x 11.58)
CCC202313, CCC202322
0.9
CCC403113, CCC403122
4.6
CCC332315, CCC332322
1.6
CCC603115, CCC603122
7.2
Panels are plated steel.
OI-44
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
COMPACT® CCI Operator Interface
Enclosure System
Operator Interface
Enclosure Systems
Bulletin
CC1
Standard Sizes CONCEPT Operator Interface Enclosures
Catalog Number a
b CCC202313
b CCC403113
b, c CCC332315
c CCC603115
b, c CCC332322
c CCC403122
c CCC603122
Mounting
GxH
mm (in.)
Front Plate
DxE
mm (in.)
Front Plate
Clear Space
PxQ
mm (in.)
J
mm
(in.)
K
mm
(in.)
M
mm
(in.)
N
mm
(in.)
S
mm
(in.)
200 x 230
(7.87 x 9.06)
402 x 310
(15.83 x 12.20)
352 x 252
(13.86 x 9.92)
620 x 330
(24.41 x 12.99)
222 x 252
(8.74 x 9.92)
352 x 252
(13.86 x 9.92)
422 x 330
(16.61 x 12.99)
620 x 330
(24.41 x 12.99)
189 x 219 x 109
(7.44 x 8.62 x 4.29)
390 x 297 x 106
(15.35 x 11.69 x 4.17)
319 x 219 x 110
(12.56 x 8.62 x 4.33)
587 x 297 x 108
(23.11 x 11.69 x 4.25)
189 x 219 x 180
(7.44 x 8.62 x 7.09)
319 x 219 x 180
(12.56 x 8.62 x 7.09)
390 x 297 x 179
(15.35 x 11.69 x 7.05)
587 x 297 x 179
(23.11 x 11.69 x 7.05)
180 x 180
(7.09 x 7.09)
261 x 383
(10.28 x 15.08)
180 x 310
(7.09 x 12.20)
261 x 580
(10.28 x 22.83)
180 x 180
(7.09 x 7.09)
180 x 310
(7.09 x 12.20)
261 x 383
(10.28 x 15.08)
261 x 580
(10.28 x 22.83)
191 x 221
(7.52 x 8.70)
391 x 301
(15.39 x 11.85)
321 x 221
(12.64 x 8.70)
591 x 301
(23.27 x 11.85)
191 x 221
(7.52 x 8.70)
321 x 221
(12.64 x 8.70)
391 x 301
(15.39 x 11.85)
591 x 301
(23.27 x 11.85)
154 x 184
(6.06 x 7.24)
353 x 263
(13.90 x 10.35)
284 x 184
(11.18 x 7.24)
554 x 264
(21.81 x 10.39)
154 x 184
(6.06 x 7.24)
284 x 184
(11.18 x 7.24)
354 x 264
(13.94 x 10.39)
554 x 264
(21.81 x 10.39)
90
(3.54)
90
(3.54)
90
(3.54)
90
(3.54)
160
(6.30)
160
(6.30)
160
(6.30)
160
(6.30)
39
(1.54)
39
(1.54)
61
(2.40)
61
(2.40)
61
(2.40)
61
(2.40)
61
(2.40)
61
(2.40)
80
(3.15)
224
(8.82)
80
(3.15)
224
(8.82)
144
(5.67)
144
(5.67)
224
(8.82)
224
(8.82)
144
(5.67)
—
170
(6.69)
373
(14.69)
300
(11.81)
270
(10.63)
170
(6.69)
170
(6.69)
373
(14.69)
570
(22.44)
a Purchase panels separately. See table on previous page.
b Suitable for Series 1 pendant mounting.
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
144
(5.67)
—
—
—
—
—
Product
Weight (lb)
5.3
7.9
7.9
15.4
8.6
8.6
15.0
20.5
c Offset cover frame.
© 2007 Hoffman Enclosures Inc.
OI-45
Operator Interface
Enclosure Systems
b, c CCC202322
Overall L x W
mm (in.)
Inside Dimensions
AxBxC
mm (in.)
PROLINE® Sloped Top
Operator Interface Enclosure System
Operator Interface
Enclosure Systems
Bulletin
P9, P9S
PROLINE sloped top
operator interface enclosures are available in
three widths—600, 800,
and 1200mm. The depth
for all sizes is 600mm.
These operator interface
enclosures are available
in both steel and stainless
steel. The sloped top with
accessory front accommodates keyboard and control
compartments as well as
writing surfaces. By introducing numerous sizes and
accessory fronts, only
Hoffman provides so vast
an array of options for
housing operator interfaces
and related equipment,
such as keyboards, pushbuttons, printers, and PLCs.
Industry Standards
UL 508A, File Number E61997
CSA File Number 42186
IEC 60529
PROLINE sloped top operator interface enclosures are rated UL and
CSA Type 4X or 12 as follows:
• Painted steel sloped tops are UL and CSA Type 12, IP55
• Painted steel front, rear, and bottom options are UL and CSA
Type 12, IP55
• Stainless steel sloped tops are UL and CSA Type 4, 4X,
and 12, IP66
• Stainless steel front, rear, and bottom options are UL and CSA
Type 4, 4X, and 12, IP66
Patents
This product is covered by the following patents:
US 5,380,083
US 5,388,903
US 5,292,189
US 5,407,263
US 391,143
OI-46
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
PROLINE® Sloped Top
Operator Interface Enclosure System
Operator Interface
Enclosure Systems
Bulletin
P9, P9S
Operator Interface
Enclosure Systems
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-47
PROLINE® Sloped Top
Operator Interface Enclosure System
Operator Interface
Enclosure Systems
Bulletin
P9, P9S
Sloped Top
Enclosure is available in three heights—400, 500, and 700mm.
Full front opening for door/cover options has a 5-degree slope.
Rear opening(s) for door and cover options. Optional PROLINE
frame shelf or PROLINE grid system is recommended to provide
a stationary platform for supporting deep equipment. The open
bottom is suitable for joining the top to a 700mm-tall PROLINE
frame. The bottom of the 600mm x 600mm sizes can be joined
through a cutout base to a pedestal or pendant arm system. A
support bracket accessory allows the 600mm x 600mm sizes to be
suspended from an overhanging pendant arm. Sloped top enclosures
are Type 304 stainless steel or 14 gauge steel with an RAL 7035 light
gray textured polyester powder paint finish.
Catalog
Number
Nominal Size
A x B x C (mm)
AxBxC
mm (in.)
PST466
400 x 600 x 600
PST566
500 x 600 x 600
PST766
700 x 600 x 600
PST766SS
700 x 600 x 600
PST786
700 x 800 x 600
PST7126
700 x 1200 x 600
407 x 608
(16.04 x 23.94 )
507 x 608
(19.98 x 23.94)
707 x 608
(27.85 x 23.94)
707 x 608
(27.85 x 23.94)
707 x 808
(27.85 x 31.81)
707 x 1208
(27.85 x 47.56)
Description
Steel
Steel
Steel
Stainless Steel
Steel
Steel
Front Opening
ExG
mm (in.)
Rear Opening
FxH
mm (in.)
D
mm (in.)
Internal
Mounting J
mm (in.)
Internal
Mounting K
mm (in.)
339 x 536
(13.36 x 21.11)
440 x 536
(17.31 x 21.11)
641 x 536
(25.22 x 21.11)
641 x 536
(25.22 x 21.11)
640 x 736
(25.22 x 28.98)
641 x 1136
(25.22 x 44.73)
336 x 564
(13.21 x 21.11)
435 x 536
(17.13 x 21.11)
636 x 536
(25.02 x 21.11)
636 x 536
(25.02 x 21.11)
636 x 736
(25.02 x 28.98)
636 x 536
(25.02 x 21.11)
507
(19.96)
498
(19.61)
481
(18.92)
481
(18.92)
481
(18.92)
481
(18.92)
225
(8.86)
325
(12.80)
525
(20.67)
525
(20.67)
525
(20.67)
525
(20.67)
225
(8.86)
325
(12.80)
525
(20.67)
525
(20.67)
525
(20.67)
525
(20.67)
Product
Weight (lb)
44.0
46.7
59.9
68.0
66.0
82.0
Sloped Top with Accessory Front
Enclosure is available in two heights: 500mm and 700mm. Upper
front opening for door/cover options has a 5-degree slope. Lower
section is suitable for keyboard or other front options. Rear
opening(s) for door and cover options. The internal mounting
hole pattern accommodates most PROLINE internal accessories.
Optional PROLINE frame shelf or PROLINE grid system provides
a stationary platform for supporting deep equipment. The open
bottom is suitable for joining the top to a 700mm PROLINE frame.
The bottom of the 600mm x 600mm sizes can be joined through a
cutout base to a pedestal or pendant arm system. A support bracket
accessory allows the 600mm x 600mm size to be suspended from an
overhanging pendant arm. Sloped tops with accessory front are Type
304 stainless steel or 14 gauge steel with RAL 7035 textured light
gray polyester powder paint finish.
Catalog
Number
Nominal Size
A x B x C (mm)
AxBxC
mm (in.)
PST5A66
500A x 600 x 600
682 x 608
(26.85 x 23.94)
682 x 608
(26.85 x 23.94)
682 x 808
(26.85 x 31.81)
682 x 1208
(26.85 x 47.56)
882 x 608
(34.72 x 23.94)
882 x 608
(34.72 x 23.94)
882 x 808
(34.72 x 31.81)
882 x 1208
(34.72 x 47.56)
PST5A66SS 500A x 600 x 600
PST5A86
500A x 800 x 600
PST5A126
500A x 1200 x 600
PST7A66
700A x 600 x 600
PST7A66SS 700A x 600 x 600
PST7A86
700A x 800 x 600
PST7A126
700A x 1200 x 600
OI-48
Description
Steel
Stainless Steel
Steel
Steel
Steel
Stainless Steel
Steel
Steel
Front Opening
ExG
mm (in.)
Rear Opening
FxH
mm (in.)
D
mm (in.)
Internal
Mounting J
mm (in.)
Internal
Mounting K
mm (in.)
440 x 536
(17.31 x 21.11)
440 x 536
(17.31 x 21.11)
440 x 736
(17.31 x 28.98)
440 x 1136
(17.31 x 44.73)
641 x 536
(25.22 x 21.11)
641 x 536
(25.22 x 21.11)
641 x 736
(25.22 x 28.98)
641 x 1136
(25.22 x 44.73)
611 x 536
(24.04 x 21.11)
611 x 536
(24.04 x 21.11)
611 x 736
(24.04 x 28.98)
611 x 536
(24.04 x 21.11)
811 x 536
(31.91 x 21.11)
811 x 536
(31.91 x 21.11)
811 x 736
(31.91 x 28.98)
811 x 536
(31.91 x 21.11)
498
(19.61)
498
(19.61)
498
(19.61)
498
(19.61)
481
(18.92)
481
(18.92)
481
(18.92)
481
(18.92)
500
(19.69)
500
(19.69)
500
(19.69)
500
(19.69)
700
(27.56)
700
(27.56)
700
(27.56)
700
(27.56)
500
(19.69)
500
(19.69)
500
(19.69)
500
(19.69)
700
(27.56)
700
(27.56)
700
(27.56)
700
(27.56)
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
Product
Weight (lb)
59.0
70.0
64.0
86.0
70.0
85.0
73.0
111.0
© 2007 Hoffman Enclosures Inc.
PROLINE® Sloped Top
Operator Interface Enclosure System
Operator Interface
Enclosure Systems
Bulletin
P9, P9S
Operator Interface
Enclosure Systems
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-49
PROLINE® Sloped Top
Operator Interface Enclosure System
Operator Interface
Enclosure Systems
Bulletin
P9, P9S
Covers with OI Cutout for Upper Front of PROLINE
Sloped Tops
Covers with OI cutouts are
secured to the front opening
of a PROLINE sloped top with
semi-flush cover screws along the
top and bottom cover edges. Use
PROLINE frame shelf or PROLINE
grid straps and plates to support
operator interface. Ground
stud and mounting hardware are
included. Seamless foam-in-place
gasket assures a watertight and
dusttight seal. Covers are 16 gauge
steel finished with RAL 7035 textured light gray polyester powder
paint. Optional tamper-resistant cover screws are available.
NOTE: Through the Modification Services program, Hoffman can provide
pre-configured covers to meet your specific requirements. Contact your local
Hoffman Sales Representative for more information.
Catalog Number
Manufacturer
Model for Manufacturer
Approx. OI
Weight (lb)
Approx. OI
Weight (Kg)
D x E (mm)
D x E (in.)
PCSK56F6
Allen-Bradley
PanelView 1200e/1400e Keypad
46
20.9
504 x 592
19.86 x 23.30
PCSK76F6
Allen-Bradley
PanelView 1200e/1400e Keypad
46
20.9
705 x 592
27.77 x 23.30
Fits Sloped
Top (mm)
Product
Weight (lb)
500 x 600 and
500A x 600
700 x 600 and
700A x 600
13.0
14.5
Covers for Upper Front of PROLINE Sloped Tops
Solid 16 gauge steel covers are
secured to the front opening of a
PROLINE sloped top with semiflush cover screws along the top
and bottom cover edges. Ground
stud and mounting hardware are
included. Seamless foam-in-place
gasket assures a watertight and
dusttight seal. Covers are
Type 304 stainless steel or 16
gauge steel with an RAL 7035
light gray textured polyester
powder paint finish. Optional
tamper-resistant cover screws
are available.
Catalog Number
Description
Cover Size H x W (mm)
Cover Size H x W (in.)
Product Weight (lb)
PCS46F
PCS56F
PCS56FSS
PCS58F
PCS58FSS
PCS512F
PCS76F
PCS76FSS
PCS78F
PCS712F
Steel
Steel
Stainless Steel
Steel
Stainless Steel
Steel
Steel
Stainless Steel
Steel
Steel
406 x 592
506 x 592
506 x 592
506 x 792
506 x 792
507 x 1192
707 x 592
707 x 592
707 x 792
707 x 1192
15.98 x 23.30
19.93 x 23.30
19.93 x 23.30
19.93 x 31.17
19.93 x 31.17
19.93 x 46.92
27.84 x 23.30
27.84 x 23.30
27.84 x 31.17
27.84 x 46.92
13.0
14.0
19.5
17.0
23.0
25.0
15.5
19.5
20.5
30.0
OI-50
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Rev. A 12/07
Operator Interface
Enclosure Systems
PROLINE® Sloped Top
Operator Interface Enclosure System
Bulletin
P9, P9S
Doors for Upper Front of PROLINE Sloped Tops
Window doors feature a
maximum size polycarbonate
window .25 inch thick with
a smoke gray tint. Window
is field-replaceable. Finish is
RAL 7035 textured light gray
polyester powder paint or
Type 304 stainless steel.
Solid Doors for Upper Front
Catalog
Number
Description
Door Size
H x W (mm)
Door Size
H x W (in.)
Product
Weight (lb)
PDS46F
PDS56F
PDS56FSS
PDS58F
PDS58FSS
PDS512F
PDS76F
PDS76FSS
PDS78F
PDS712F
Steel
Steel
Stainless Steel
Steel
Stainless Steel
Steel
Steel
Stainless Steel
Steel
Steel
404 x 592
504 x 592
504 x 592
504 x 792
504 x 792
504 x 1192
705 x 592
705 x 592
705 x 792
705 x 1192
15.91 x 23.30
19.86 x 23.30
19.86 x 23.30
19.86 x 31.17
19.86 x 31.17
19.86 x 46.92
27.77 x 23.30
27.77 x 23.30
27.77 x 31.17
27.77 x 46.92
14.0
15,9
21,5
18.0
24.0
26.0
16.5
20.5
21.5
31.0
Window Doors for Upper Front
Catalog Number
Description
Door Size
H x W (mm)
Door Size
H x W (in.)
Window Size
M x N (mm)
Window Size
M x N (in.)
Product Weight
(lb)
PDW46F
PDW56F
PDW56FSS
PDW56W16
PDW58F
PDW58FSS
PDW76F
PDW76FSS
PDW76W21
Steel
Steel
Stainless Steel
Steel
Steel
Stainless Steel
Steel
Stainless Steel
Steel
404 x 592
504 x 592
504 x 592
504 x 592
504 x 592
504 x 592
705 x 592
705 x 592
705 x 592
15.91 x 23.30
19.86 x 23.30
19.86 x 23.30
19.86 x 23.30
19.86 x 23.30
19.86 x 23.30
27.77 x 23.30
27.77 x 23.30
27.77 x 23.30
254 x 432
362 x 432
362 x 432
254 x 318
362 x 635
362 x 635
559 x 432
559 x 432
330 x 432
10.00 x 17.00
14.25 x 17.00
14.25 x 17.00
10.00 x 12.50
14.25 x 25.00
14.25 x 25.00
22.00 x 17.00
22.00 x 17.00
13.00 x 17.00
14.0
15.0
21.5
15.0
18.0
24.0
16.5
20.5
16.5
PROLINE Upper Front Door Accessories
These accessories provide a variety of latch configurations for
PROLINE sloped top front doors.
Catalog Number
Key Inserts
llksm7
llksm8
llkdbm3
llkdb
llkss
Description
7mm square
8mm square
Double-bit with 3mm pin
Daimler Benz
Slotted
Wing Knob Latch
llkwk
One latch and two keys
Flush Key Lock
pstlo
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
One lock and two keys
© 2007 Hoffman Enclosures Inc.
OI-51
Operator Interface
Enclosure Systems
Solid 16 gauge steel doors
are available with or without
windows. Doors are hinged at
lower edge and have quarterturn latches. A stop arm
assembly holds the door at 95
degrees (horizontal) from its
closed position. Standard latch
and insert options are available.
Ground stud and mounting
hardware are included.
Seamless polyurethane foam-inplace gasket assures watertight
and dusttight seal.
PROLINE® Sloped Top
Operator Interface Enclosure System
Operator Interface
Enclosure Systems
Bulletin
P9, P9S
Covers for Rear of PROLINE Sloped Tops
Cover fits rear opening of PROLINE sloped tops and is secured
with semi-flush cover screws along right and left cover edges.
Use PROLINE frame shelf or PROLINE grid straps to support the
operator interface. Seamless foam-in-place gasket assures watertight
and dusttight seal. Ground stud and mounting hardware are included.
Optional tamper-resistant screws are available. Covers are Type 304
stainless steel or 16 gauge steel finished with RAL 7035 textured light
gray polyester powder paint.
Solid Covers
Catalog
Number
Description
Cover Size
H x W (mm)
Cover Size
H x W (in.)
Product
Weight (lb)
PCS46R
PCS56R
PCS76R
PCS76RSS
PCS78R
PCS5A6R
PCS5A6RSS
PCS5A8R
PCS7A6R
PCS7A6RSS
PCS7A8R
Steel
Steel
Steel
Stainless steel
Steel
Steel
Stainless steel
Steel
Steel
Stainless steel
Steel
405 x 596
506 x 596
596 x 706
596 x 706
706 x 796
679 x 597
679 x 597
679 x 796
879 x 596
879 x 596
879 x 796
15.96 x 23.47
19.92 x 23.47
23.47 x 27.79
23.47 x 27.79
27.79 x 31.35
26.75 x 23.51
26.75 x 23.51
26.75 x 31.35
34.62 x 23.47
34.62 x 23.47
34.62 x 31.35
13.0
14.0
17.0
23.0
20.5
15.0
21.0
19.0
18.0
24.0
24.0
Covers with Cutouts for Hoffman Side-Mounted
13 Series Air Conditioner
Catalog
Number
Description
Cover Size
H x W (mm)
Cover Size
H x W (in.)
Product
Weight (lb)
PCSK46ACR
PCSK56ACR
PCSK76ACR
PCSK5A6ACR
PCSK7A6ACR
Steel
Steel
Steel
Steel
Steel
405 x 596
506 x 596
596 x 706
679 x 597
879 x 596
15.96 x 23.47
19.92 x 23.47
23.47 x 27.79
26.75 x 23.51
34.62 x 23.47
13.0
14.0
17.0
15.0
18.0
Covers with Cutouts for Hoffman XR206
Heat Exchanger
OI-52
Catalog
Number
Description
Cover Size
H x W (mm)
Cover Size
H x W (in.)
Product
Weight (lb)
PCSK76HXR
PCSK5A6HXR
PCSK7A6HXR
Steel
Steel
Steel
596 x 706
679 x 597
879 x 596
23.47 x 27.79
26.75 x 23.51
34.62 x 23.47
17.0
15.0
18.0
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
PROLINE® Sloped Top
Operator Interface Enclosure System
Operator Interface
Enclosure Systems
Bulletin
P9, P9S
Doors for Rear of PROLINE Sloped Tops
PROLINE Solid Rear Door Accessories
Accessories listed here are designed for use with PROLINE Sloped
Top ear doors. See also PROLINE Door Accessories in the Modular
Enclosure Systems chapter.
Catalog Number
Description
Door Size
Door Size
H x W (mm) H x W (in.)
Product
Weight (lb)
PDS46R
PDS56R
PDS76STR
PDS76RSS
PDS78STR
PDS5A6R
PDS5A6RSS
PDS5A8R
PDS7A6R
PDS7A6RSS
PDS7A8R
Steel
Steel
Steel
Stainless Steel
Steel
Steel
Stainless Steel
Steel
Steel
Stainless Steel
Steel
405 x 592
506 x 592
706 x 592
706 x 592
706 x 792
679 x 592
679 x 592
679 x 792
879 x 592
879 x 592
879 x 792
10.0
12.0
15.0
19.5
19.5
14.5
19.0
19.0
18.0
25.0
24.0
Catalog Number
Key Inserts
pkotm7
pkotm8
pkotm65
pkosm7
pkosm8
pkodbk3
pkodb
pkoatt
15.96 x 23.30
19.91 x 23.30
27.79 x 23.30
27.79 x 23.30
27.79 x 31.17
26.75 x 23.30
26.75 x 23.30
26.75 x 31.17
34.62 x 23.30
34.62 x 23.30
34.62 x 31.17
Description
7mm triangle
8mm triangle
CNOMO
7mm square
8mm square
Double-bit with 3mm pin
Daimler Benz
AT & T
Flush Handle
pshkbl
One handle and two keys
Data Pockets
adp1
adp2
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
Small data pocket
Large data pocket
© 2007 Hoffman Enclosures Inc.
OI-53
Operator Interface
Enclosure Systems
Rear doors are side-hinged. The
hinges are hidden and provide
130-degree door swing. Optional
PROLINE 180-degree hinge kit
is available (see PROLINE Door
Accessories in the Modular
Enclosure Systems chapter).
Doors can be hinged from left
or right. Door includes two
point latching with a flush slotted
quarter turn insert. Standard
PROLINE handle and insert options are available for retrofit (see
PROLINE Solid Rear Door Accessories below). Use PROLINE frame
shelf or PROLINE grid straps to support the operator interface.
Ground stud and mounting hardware are included. Seamless foam-inplace gasket assures a watertight and dusttight seal. Covers are Type
304 stainless steel or 16 gauge steel finished with RAL 7035 textured
light gray polyester powder paint.
PROLINE® Sloped Top OI
Enclosure System
Selection Matrix: Front and Rear Options
Operator Interface
Enclosure Systems
Bulletin
P9, P9S
Component Selection Matrix Sloped Top Front and Rear Options
Front Options
Sloped Top
A
B
C
Solid Cover
(Steel)
Solid Cover
(Stainless Steel)
400
600
600
PCS46F
500
600
600
PCS56F
PCS56FSS
700
600
600
PCS76F
PCS76FSS
700
800
600
PCS78F
Solid Door
(Steel)
Solid Door
(Stainless Steel)
Window Door
(Steel)
Window Door
(Stainless Steel)
Cover with
OI Cutout
PDS56F
PDS56FSS
PDW56F or PDW56W16
PDS76F
PDW56FSS
PCSK56F6
PDS76FSS
PDW76W or PDW76W21
PDW76FSS
PCSK76F6
Solid Door
(Stainless Steel)
Window Door
(Steel)
Window Door
(Stainless Steel)
Cover with
OI Cutout
Cover with
OI Cutout
PDS46F
PDW46F
PDS78F
Front Options
1200mm Sloped Top
A
B
C
Solid Cover
(Steel)
700
1200
600
PCS712F
Solid Cover
(Stainless Steel)
Solid Door
(Steel)
PDS712F
Front Options
Sloped Top with
Accessory Front
A
B
C
Solid Cover
(Steel)
Solid Cover
(Stainless Steel)
Solid Door
(Steel)
Solid Door
(Stainless Steel)
Window Door
(Steel)
Window Door
(Stainless Steel)
PDW56FSS
500A
600
600
PCS56F
PCS56FSS
PDS56F
PDS56FSS
PDW56F or PDW56W16
500A
800
600
PCS58F
PCS58FSS
PDS58F
PDS58FSS
PDW58F
PDW58FSS
PCSK56F6
700A
600
600
PCS76F
PCS76FSS
PDS76F
PDS76FSS
PDW76F or PDW76W21
PDW76FSS
PCSK76F6
700A
800
600
PCS78F
Solid Door
(Stainless Steel)
Window Door
(Steel)
Window Door
(Stainless Steel)
Cover with
OI Cutout
PDS78F
Front Options
1200mm Sloped Top
with Accessory Front
Solid Cover
(Steel)
Solid Cover
(Stainless Steel)
Solid Door
(Steel)
A
B
C
500A
1200
600
PCS512F
PDS512F
700A
1200
600
PCS712F
PDS712F
OI-54
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
PROLINE® Sloped Top OI
Enclosure System
Selection Matrix: Front and Rear Options
Operator Interface
Enclosure Systems
Bulletin
P9, P9S
Component Selection Matrix Sloped Top Front and Rear Options
Rear Options
Solid Cover
(Steel)
Solid Cover
(Stainless Steel)
Cover with
Cover with
Air Conditioner Cutout a Heat Exchanger Cutout b
Door with Side Hinge
(Steel)
PCSK46ACR
PDS46Rc
PCS56R
PCSK56ACR
PDS56Rc
PCS76R
PCS76RSS
PCSK76ACR
PCSK76HXR
PDS76STRc
PDS76RSS c
PDS78STRc
PCS78R
Sloped Top
A
B
C
400
600
600
500
600
600
700
600
600
700
800
600
Rear Options
Solid Cover
(Steel)
Solid Cover
(Stainless Steel)
PCS76R
PCS76SS
Cover with
Cover with
Air Conditioner Cutout a Heat Exchanger Cutout b
PCSK76ACR
PCSK76HXR
1200mm Sloped Top
Door with Side Hinge
(Steel)
Door with Side Hinge
(Stainless Steel)
PDS76STRc
PDS76RSS c
Door with Side Hinge
(Steel)
Door with Side Hinge
(Stainless Steel)
A
B
C
PDS5A6Rc
PDS5A6RSS c
500A
600
600
A
B
C
700
1200
600
Rear Options
Solid Cover
(Steel)
Solid Cover
(Stainless Steel)
PCS5A6R
PCS5A6RSS
Cover with
Cover with
Air Conditioner Cutout a Heat Exchanger Cutout b
PCSK5A6ACR
PCSK5A6HXR
PDS5A8Rc
PCS5A8R
PCS7A6R
PCS7A6RSS
PCSK7A6ACR
PCSK7A6HXR
PDS7A6Rc
PDS7A6RSS c
PDS7A8Rc
PCS7A8R
Sloped Top with
Accessory Front
500A
800
600
700A
600
600
700A
800
600
Rear Options
Solid Cover
(Steel)
Solid Cover
(Stainless Steel)
Cover with
Cover with
Air Conditioner Cutout a Heat Exchanger Cutout b
PCS5A6R
PCS5A6RSS
PCSK5A6ACR
PCS7A6R
PCS7A6RSS
PCSK7A6ACR
1200mm Sloped Top
with Accessory Front
Door with Side Hinge
(Steel)
Door with Side Hinge
(Stainless Steel)
A
B
C
PCSK5A6HXR
PDS5A6Rc
PDS5A6RSS c
500A
1200
600
PCSK7A6HXR
PDS7A6Rc
PDS7A6RSS c
700A
1200
600
a
For Hoffman Side Mount 13 Series air conditioners.
For Hoffman XR-20-6 heat exchangers.
c
Door hinged on side. Two-point latching with slotted insert. Other handle options are available. See Accessories for Sloped Top OI Enclosures in this section.
b
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-55
Operator Interface
Enclosure Systems
PCS46R
Door with Side Hinge
(Stainless Steel)
Operator Interface
Enclosure Systems
PROLINE® Sloped Top OI
Enclosure System
Internal Components
Bulletin
P9, P20
Full Subpanels
Subpanels are 12 gauge steel,
have flanges on all sides, and are
painted white, except conductive
panels are plated. They can be
mounted in PROLINE frame
bases and OI sloped tops at any
depth in 25mm increments using
optional grid straps. All mounting
hardware is included.
Catalog Number
Conductive Panel
Catalog Numbers
H (mm)
H (inch)
W (mm)
W (inch)
Fits
PPF76
PPF78
PPF712
PPF76G
PPF78G
PPF712G
585
585
585
23.03
23.03
23.03
530
730
1130
20.87
28.74
44.49
500A x 600 and 700 x 600
500A x 800 and 700 x 800
500A x 1200 and 700 x 1200
Partial Subpanels
Partial subpanels are 12 gauge
steel, have flanges on all sides,
and are painted white, except
conductive panels are plated.
They can be positioned vertically
in .88-inch increments and can
also be positioned in PROLINE
frame bases and OI sloped tops
at any depth in 25mm increments
using optional grid straps. All
mounting hardware is included.
Finish is white.
Catalog Number
Conductive Panel
Catalog Numbers
H (mm)
H (inch)
W (mm)
W (inch)
Fits
PPP412
PPP46
PPP48
PPP412G
PPP46G
PPP48G
360
360
360
14.17
14.17
14.17
1130
530
730
44.49
20.87
28.74
All 1200 wide OIs
All 600 wide OIs
All 800 wide OIs
Catalog
Number
Wire
Size
Length
Between Ring
Terminals
(in.)
Length
Between Ring
Terminals
(mm)
Ring
Terminal
Hole Diameter
(in.)
Ring
Terminal
Hole
Diameter Product
(mm)
Weight
PGK
12 ga.
16.19
411
.285
7
Grounding Kit
The grounding kit allows
a PROLINE cabinet to be
grounded to VDE specifications.
Includes six 12 gauge wires 16.19
inches (411mm) long with ring
terminations and M6 mounting
hardware.
OI-56
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
0.7 lb
© 2007 Hoffman Enclosures Inc.
PROLINE® Sloped Top OI
Enclosure System
Internal Components
Operator Interface
Enclosure Systems
Bulletin
P9, P20
Rack Angles for Sloped Tops
Symmetrical rack angles have
through-holes in mounting surfaces
for mounting rack equipment.
Angles are 14 gauge plated steel.
Rack angles with through-holes
accommodate either English or
metric cage nuts. Rack angles are
furnished in pairs and comply with
ANSI/E.I.A. RS310 rack mounting
standards.
Units
H (mm)
H (in.)
Description
Product Weight (lb)
PRA5TH
PRA7TH
PRA9TH
PRA13TH
PRA17TH
5
7
9
13
17
223
312
401
578
756
8.77
12.27
15.77
22.77
29.77
General Purpose Short Section
Fits Front and back of 400 high OI
Fits front of 500/500A and back of 700/500A
Fits front of 500/500A and back of 700/500A
Fits back of 700A
2.5
3.5
4.5
6.5
8.0
PROLINE Joining Kits
Joining kits permit joining two
700mm frames while maintaining
an environmental seal. Joining
kit for side-to-side applications
(PJ2FW7) fits on either side of
the frame. Top-to-frame joining
kits allow sloped tops to be
attached to 700mm PROLINE
frames or to wall-mount kit. Kits
available for one sloped top and
one frame, or one 1200mm wide
sloped top on two joined frames.
Kits include gasket and mounting
hardware.
Catalog Number
Description
PJ2FW7
PJSTF12
PJSTF6
PJSTF8
Joins frames side-to-side under OI Sloped tcps
Joins OI sloped top to 1200 x 600 frame
Joins OI sloped top to 600 x 600 frame
Joins OI sloped to to 800 x 600 frame
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-57
Operator Interface
Enclosure Systems
Catalog Number
Operator Interface
Enclosure Systems
PROLINE® Sloped Top OI
Enclosure System
Selection Matrix: Internal Components
Bulletin
P9, P20
Component Selection Matrix Internal Components for Sloped Top Frame Base
OI-58
•
•
•
•
•
•
•
•
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
•
•
•
•
•
•
Center
Upright
(See Modular
Enclosures)
PCU7
•
•
Grounding Bar
System
(See Modular
Enclosures)
PGH3S12
PGH3S7
•
PGH3S9
PGH3S6
PGH1S13
•
•
PGH1S9
PGH1S7
•
Grid Strap
Three Row
(See Modular
Enclosures)
PGS4K
•
PSP78
•
•
Grid Strap
One Row
(See Modular
Enclosures)
PGH1S6
•
•
PSP76
PPP412 / PPP412G
PPP48 / PPP48G
Swing-Out
Panel Kit
(See Modular
Enclosures)
PGS2K
PF7126
PPP46 / PPP46G
•
Partial
Subpanel
(See Modular
Enclosures)
PPF712 / PPF712G
PF766
PR786
PPF78 / PPF78G
Sloped Top
Frame Bases
PPF76 / PPF76G
Full
Subpanel
(See Modular
Enclosures)
•
© 2007 Hoffman Enclosures Inc.
Operator Interface
Enclosure Systems
PROLINE® Sloped Top OI
Enclosure System
Selection Matrix: Internal Components
Bulletin
P9, P20
Component Selection Matrix Internal Components for Sloped Top Frame Base
•
•
PRB50
•
Frame Reducing
Brackets
(See Modular
Enclosures)
PFSH86
PRA247TH/TP
•
•
PFSH66
PRA197TH/TP
Frame
Shelf
(See Modular
Enclosures)
PSF78
Rack
Angles
(See Modular
Enclosures)
•
•
•
Sloped Top
Frame Bases
PF766
•
PF786
PF7126
Accessories for Swing-Out Rack Frame Include:
Guides
PSFG
Rack Panels
A19RP____ (23 models)
Screw Package
AS1032 or PSM5
Clip Nut Packages
AN1032 or PNM5
Accessories for Rack Angles Include:
Drawers
A19DR2U and A19DR4U
Drawer Writing Surface
A19WSDR
Guides
PSFG, AG1U5, and AG1U6
Slides
A16SL2U
Fixed Shelf
A19SH5 and A19SH6
Pull-Out Shelf
A19SHP6
Rack Panels
A19RP____ (23 models)
Screw Package
AS1032 or PSM5
Clip Nut Packages
AN1032 or PNM5
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-59
Operator Interface
Enclosure Systems
PSF76
Swing-Out
Rack Frame
(See Modular
Enclosures)
PROLINE® Sloped Top OI
Enclosure System
Accessory Front Options
Operator Interface
Enclosure Systems
Bulletin
P20, P20S, P20PC
A variety of keyboard shelves and
compartments, control compartments,
and writing surfaces accommodate
any input device your application
specifies—full travel or membrane
keyboards, mouse devices, pushbuttons, or switches. Keyboard or control
compartment options, when fitted to a
PROLINE sloped top operator interface
enclosure with accessory front, make it
exceptionally easy to design a unique
and flexible OI enclosure system.
OI-60
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
PROLINE® Sloped Top OI
Enclosure System
Accessory Front Options
Operator Interface
Enclosure Systems
Bulletin
P20, P20S, P20PC
Accessory Front Options
An integrated elastomer keyboard/mouse combination is available on
some models of the keyboard shelf accessory. The keyboard has 101
keys. Supplied cables are compatible with USB connections.
See Modular Enclosure Systems chapter for keyboard accessory dimensions.
Internal and External Accessories
Numerous accessories are available for mounting equipment inside
PROLINE frames and sloped tops. These include panels, shelves, and
rack mounting accessories. There are also external accessories such
as door handles and base options. A summary list follows.
For more detailed information on each of these products, see the indexes to the
Modular Enclosure Systems and Accessories chapters.
Full Subpanel
Partial Subpanel
Side-Mounting Kit for Subpanels
Swing-Out Panel Mounting Kit
Frame Shelves
Frame Brackets
Panel Interface Connector
Grounding Bar System
Grid System
Rack Angles
Accessories for Rack Angles
Base Accessories
Door Accessories
Legs
Casters
Description
Fits
Weight (lb)
PCS6
PCSA6SS
PCS8
PCSA8SS
Steel
Stainless Steel
Steel
Stainless Steel
600
600
800
800
7.3
9.2
7.9
9.80
Consolet
Compartments
Catalog Number
Description
Fits
Weight (lb)
PCC6
PCDS6SS
PCC8
PCDS8SS
Steel
Stainless steel
Steel
Stainless steel
600
600
800
800
30.0
40.9
35.0
44.0
20º Control
Compartments
Catalog Number
Description
Fits
Weight (lb)
PC20A6
PC20A6SS
PC20A8
PC20A8SS
Steel
Stainless steel
Steel
Stainless Steel
600
600
800
800
21.0
27.0
26.0
29.0
Keyboard
Compartments
Catalog Number
Description
Fits
Weight (lb )
PKBC6R
PKBC8R
Steel
Steel
600
800
42.0
48.0
Keyboard
Shelves
Catalog Number
Description
Fits
Weight (lb)
PKBS6
PKBS8
Steel
Steel
600
800
20.0
24.0
Keyboard Shelves
with Integrated
Keyboard/Mouse
Catalog Number Description
Fits
Weight (lb)
PEKBMC6
PEKBMC6SS
600
800
21.0
25.0
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
Steel with keyboard
Stainless steel with keyboard
© 2007 Hoffman Enclosures Inc.
OI-61
Operator Interface
Enclosure Systems
A variety of keyboard compartments and shelves, control
compartments, and writing surfaces is available in steel finished with
RAL 7035 light gray polyester powder paint or Type 304 stainless
steel. Each one is designed to fit into the accessory front opening
of the PROLINE OI sloped top. An access cover is available for
applications not requiring a keyboard or controls.
Access Covers
Catalog Number
PROLINE® Sloped Top OI
Enclosure System
Selection Matrix: Accessory Front Options
Operator Interface
Enclosure Systems
Bulletin
various
Component Selection Matrix Accessory Front Options
Keyboard and Control Compartments
Sloped Top with
Accessory Front
A
B
C
Access Cover
(Steel)
Access Cover
(Stainless Steel)
20° Control Compartment
(Steel)
20° Control Compartment
(Stainless Steel)
500A
600
600
PCS6
PCSA6SS
PC20A6
PC20A6SS
500A
800
600
PCS8
PCSA8SS
PC20A8
PC20A8SS
700A
600
600
PCS6
PCSA6SS
PC20A6
PC20A6SS
700A
800
600
PCS8
PCSA8SS
PC20A8
PC20A8SS
Keyboard and Control Compartmentsa
1200mm Sloped Top
with Accessory Front
a
A
B
C
Access Cover
(Steel)
Access Cover
(Stainless Steel)
20° Control Compartment
(Steel)
20° Control Compartment
(Stainless Steel)
500A
1200
600
PCS6
PCSA6SS
PC20A6
PC20A6SS
700A
1200
600
PCS6
PCSA6SS
PC20A6
PC20A6SS
Select any two 600mm front options.
OI-62
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
PROLINE® Sloped Top OI
Enclosure System
Selection Matrix: Accessory Front Options
Operator Interface
Enclosure Systems
Bulletin
Various
Component Selection Matrix Accessory Front Options
Keyboard and Control Compartments
Sloped Top with
Accessory Front
Keyboard Shelf
Keyboard
Compartment
Consolet Compartment
(Steel)
Consolet Compartment
(Stainless Steel)
A
B
C
PEKBMC6 or PEKBMC6SS
PKBS6
PKBC6R
PCC6
PCDS6SS
500A
600
600
PKBS8
PKBC8R
PCC8
PCDS8SS
500A
800
600
PKBS6
PKBC6R
PCC6
PCDS6SS
700A
600
600
PKBS8
PKBC8R
PCC8
PCDS8SS
700A
800
600
Consolet Compartment
(Steel)
Consolet Compartment
(Stainless Steel)
PEKBMC6 or PEKBMC6SS
Keyboard and Control Compartmentsa
a
1200mm Sloped Top
with Accessory Front
Keyboard Shelf
with Integrated Keyboard
Keyboard Shelf
Keyboard
Compartment
A
B
C
PEKBMC6 or PEKBMC6SS
PKBS6
PKBC6R
PCC6
PCDS6SS
500A
600
600
PEKBMC6 or PEKBMC6SS
PKBS6
PKBC8R
PCC6
PCDS6SS
700A
800
600
Select any two 600mm front options.
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-63
Operator Interface
Enclosure Systems
Keyboard Shelf
with Integrated Keyboard
Mounting Options for Operator
Interface Enclosures
Mounting Options
Bulletin
P9
Mounting Options that match the application. When
selecting mounting options for operator interface
and machine control applications, you must take into
consideration the following: the operator, the facility size and layout, the flexibility required for moving
or repositioning the equipment, and the peripheral
equipment required. Hoffman offers a wide range
of off-the-shelf mounting choices, from pendant arm
systems with exceptional load-bearing capabilities to
uniquely flexible frame base and pedestal systems, all
designed to simplify the job of correctly matching the
equipment to the application.
The COMPACT® Series 1 Pendant Arm system is sized to
fit our INLINE® Operator Interface enclosures as well as CC1
enclosures for flat screen and other small displays. The Series 1
Pendant Arm system allows convenient operator access to machine
controls. Despite their light weight, Series 1 components are
designed to support a variety of load weights. Heavy-duty bearings
in all movable joints enhance durability and make operation smooth
and convenient.
Pedestals for mounting operator interface enclosures are available
in two heights and in bolt-down or leg styles. Pedestal mounting
options include a swivel tilt mechanism that rotates 350 degrees and
tilts ±30 degrees from the horizontal. A tilt lock-release knob allows
quick incremental adjustments.
Pedestal mounting of a PROLINE® sloped top enclosure
provides convenient operator access in a seated or standing position.
An optional swivel mechanism allows 350-degree rotation. Other
options include an angle adapter that provides a fixed tilt of 15
degrees.
COMPACT Series 2 and Series 4 Pendant Arm systems are
available in sizes appropriate for light to heavy loads. A variety of
standard tube lengths, brackets, joints, and couplings combine to
create a wide variety of configurations.
OI-64
COMPACT CC1 Operator Interface enclosures can be
mounted from above or below with COMPACT pendant arms.
Pedestal mounting is also an option.
The modular design of the COMPACT pendant mounting
system provides design flexibility for both new and retrofit
applications requiring substantial weight-bearing capability. Pendant
arms are easily mounted to a machine, wall, or floor, and can
suspend an enclosure from above or support it from below.
The modular stainless steel CS480 and CS600 pendant
mounting systems are particularly well-suited to the food and
pharmaceutical industries. They can be used with most stainless steel
operator interfaces. In addition, the system includes its own set of
front door enclosures.
Any sloped top can be mounted to a 700mm-tall frame base to
provide additional space for rack, subpanel, or grid system mounted
equipment. The frame base is completed by adding doors, covers,
and base components.
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Mounting Options for Operator
Interface Enclosures
Mounting Options
Bulletin
P9
Operator Interface
Enclosure Systems
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-65
Mounting Options Pedestals and Pedestal
Accessories for INLINE® OI
and CONCEPT® OI Enclosures
Pedestals
Pedestals with legs and bolt-down pedestals are available in two
heights. Vertical tube has rigid one-piece construction. Bottom of
tube is open. Pedestal with legs has four sturdy die-cast legs that bolt
to tube. Legs have holes for bolting pedestal to the floor. Legs are
furnished with levelers and will accept casters in limited applications.
Heavy-duty black polymer caps fit on ends of legs to cover bolts or
levelers. Bolt-down pedestal has rigid cast aluminum base flange that
bolts to the vertical tube. Pedestals have ANSI 61 medium gray or
RAL 7035 textured light gray polyester powder paint finish. Tapped
mounting holes in the top of pedestals allow attachment to operator
interface enclosure or to swivel, swivel tilt, or angle adapter.
Hardware and gasket to attach enclosure are included.
Angle Adapter
Bulletin
P1
Catalog Number
Finish
Description
A (mm)
A (in.)
AP26L44
AP26L44LG
AP36L44
AP36L44LG
AP23B44
AP23B44LG
AP33B44
AP33B44LG
ANSI 61
RAL 7035
ANSI 61
RAL 7035
ANSI 61
RAL 7035
ANSI 61
RAL 7035
With legs
With legs
With legs
With legs
Bolt-down
Bolt-down
Bolt-down
Bolt-down
660
660
914
914
584
584
838
838
26.00
26.00
36.00
36.00
23.00
23.00
33.00
33.00
Catalog Number
Angle adapter fits on top of pedestal and provides a fixed tilt of 15
degrees from horizontal for enclosure mounting. Angle adapter
is aluminum with large cable opening. Finish is clear anodized
aluminum. Mounting hardware is included.
OI-66
Mounting Options
AAA1544
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Mounting Options Pedestals and Pedestal
Accessories for INLINE® OI
and CONCEPT® OI Enclosures
Swivel Tilt
Swivel
A swivel mechanism can be used to allow a machine operator a way
to easily rotate an operator interface enclosure to a convenient
operating position. Maximum rotation is 350 degrees. The low
profile swivel has a large center opening in addition to a large
wobble-free bearing surface. Swivel mechanism can be locked in
any position. The swivel mechanism can be used for mounting from
below the operator interface enclosure. The swivel fits top of
pedestal.
Do not use the swivel between an overhead support and an
enclosure.
The swivel is cast aluminum with an anodized finish. Mounting
hardware and gaskets are furnished.
Bulletin
P1
Catalog Number
Description
AST44
4 X 4 Swivel Tilt
Catalog Number
Description
ASWV44
4 x 4 Swivel
Operator Interface
Enclosure Systems
The combined swivel and tilt mechanism allows rotation and tilt
of an operator interface enclosure for optimum viewing and safe
operation. The swivel tilt is positioned between the operator
interface enclosure and pedestal (enclosure reinforcement may be
required).
Do not use the swivel tilt between an overhead support and
an enclosure.
Maximum swivel rotation: 350 degrees. Maximum tilt: ±30
degrees from horizontal. Large tilt lock release knob allows quick
incremental adjustment. Swivel mechanism can be locked in any
position. Easy installation on pedestals of top mount. Large center
opening accommodates control cables with plugs. Cast aluminum
with anodized finish. Mounting hardware and gaskets are furnished.
Mounting Options
Swivel and Swivel Tilt Loading
Catalog Number
Maximum Enclosure Size Maximum Load
A x B x C mm (in.)
Including Enclosure
ast44
(4 x 4 Swivel Tilt)
aswv44
(4 x 4 Swivel)
610 x 610 x 406
(24.00 x 24.00 x 16.00)
610 x 610 x 406
(24.00 x 24.00 x 16.00)
75 lbs.
100 lbs.
The loads listed assume that the additional load is centered on the
front or back of the enclosure. Please contact Hoffman for specific
application information.
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-67
Mounting Options
Bases for PROLINE® Sloped Top
OI Enclosure System
PROLINE Wall-Mount Kit
Hinged platform for a PROLINE
sloped top enclosure pivots 90
degrees from wall bracket, thus
allowing complete access to rear
of the sloped top enclosure.
The kit can be installed to pivot
left or right, and locks securely
in position against a wall. Pivot
pin is removable. Platform can
support equipment weighing
up to 300 pounds and includes
holes to mount 600mm wide
sloped tops in two positions.
RAL 7035 textured light gray
polyester powder paint finish.
Includes top unit to frame
joining kit, catalog number
PJSTF6, to provide a watertight
and dusttight seal to the sloped
top.
Bases for PROLINE Sloped Top
Closes off open bottom of sloped
top enclosures that are tabletop mounted or suspended from
overhead. Base is 14 gauge steel
and has a ground stud provided.
Foam-in-place gasket assures a
watertight and dusttight seal.
Steel bases are finished with
RAL 7035 textured light gray
polyester powder paint. A top
support bracket can be installed
inside a 600mm wide base for
reinforcement when COMPACT®
pendant arm Series 4 System 50,
60, or 80 is attached from below.
OI-68
Bulletin
various
Catalog Number
A x B x C mm (in.)
Description
Bulletin Number
PWMK66
51 x 610 x 683
(2.0 x 24.0 x 26.88)
Steel
P9
0mm Base
Catalog Number Description
D (mm) D (in.)
Bulletin
W (mm) W (in.) Number
PBS66
PBS66SS
PBS86
PBS126
542
542
542
542
608
608
808
1208
Steel
Stainless Steel
Steel
Steel
21.34
21.34
21.34
21.34
23.94
23.94
31.81
47.56
P9, P20
P9S, P20S
P9, P20
P9, P20
100mm Base
Catalog Number Description
Bulletin
D (mm) D (in.) W (mm) W (in.) Number
PB166
PB166SS
PB186
PB186SS
559
559
759
759
Steel
Stainless Steel
Steel
Stainless Steel
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
22.01
22.01
29.88
29.88
599
599
599
599
23.58
23.58
23.58
23.58
P9, P20
P9S, P20S
P9, P20
P9S, P20S
© 2007 Hoffman Enclosures Inc.
Bases for PROLINE® Sloped Top
OI Enclosure System
Support Bracket
Mounting Options
Bulletin
Various
Catalog Number
Description
Bulletin Number
PTS66
Support Bracket
P9
Operator Interface
Enclosure Systems
A support bracket is required when suspending a 600mm wide
sloped top enclosure from above. The rigid bracket mounts inside
the enclosure to stiffen its top. Bracket has prepunched holes to fit
COMPACT® pendant arm Series 4 Systems 50, 60, 80, and 80/140
flange couplings as well as swivel tilts. Bracket is used as a template
to drill holes in sloped top. Bracket is .125-inch-thick aluminum and
is furnished with mounting bolts and seals. A support bracket can
also be used inside a base for Series 4 System 50, 60, 80, or 80/140
sloped tops when mounting from below.
Base with Cutout for PROLINE Sloped Top
Closes off open bottom of
sloped top enclosures. Also fits
Series 4 Pendant Arm Flange
Coupling Systems 80 and 80/140.
The 14 gauge steel base has a
stiffener framework attached to
the inside and mounting holes
that provide a rigid mounting
means for 8.00 x 8.00 pedestal,
pedestal extension, swivel tilt, or
angle adapter. Base has foamin-place gasket and RAL 7035
textured light gray polyester
powder paint finish. Mounting
hardware is furnished.
Catalog Number
Description
Bulletin Number
PBSK66
PBSK66SS
Steel
Stainless Steel
P9
P9S
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-69
Frame Base for PROLINE® Sloped Top
OI Enclosure System
Mounting Options
Bulletin
P9, P20, P20EM
PROLINE Frame Base
Frames are 700mm tall and
are sized to allow sloped tops
to be installed on top and
other equipment below, thus
configuring a console suitable
for sitting or standing
operators. The frame
provides joining capability
and means for rack, subpanel,
or grid system mounting of
any type of equipment inside.
Frames are available 600,
800, and 1200mm wide to
fit 600, 800, and 1200mm
wide sloped tops. All frames
have two latch/hinge blocks
per vertical unit. Requires
appropriate frame joining kit.
Finish is RAL 7035 textured light gray polyester powder paint. See
Modular Enclosure Systems for additional frame sizes.
NOTE: A 1200mm wide sloped top will accommodate two 600mm wide
frames only if frame joining kit PJ2FW7 is used.
Catalog Number
Nominal Frame Size
A x B x C mm (in.)
PF766
700 x 600 x 600
PF766HF
700 x 600 x 600
PF786
700 x 800 x 600
PF786HF
700 x 800 x 600
PF7126
700 x 1200 x 600
680 x 599 x 588
(26.77 x 23.58 x 23.15)
680 x 599 x 588
(26.77 x 23.58 x 23.15)
680 x 799 x 588
(26.77 x 31.46 x 23.15)
680 x 799 x 588
(26.77 x 31.46 x 23.15)
680 x 1199 x 588
(26.77 x 47.2 x 23.15)
OI-70
Maximum Subpanel Size
(mm)
Maximum Subpanel Size
(in.)
Maximum
Rack Mounting Space
585 x 530
23.03 x 20.87
13U
585 x 530
23.03 x 20.87
13U
585 x 530
23.03 x 20.87
13U
585 x 530
23.03 x 20.87
13U
585 x 1130
23.03 x 44.49
13U x 2
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Frame Base for PROLINE® Sloped Top
OI Enclosure System
Mounting Options
Bulletin
P9, P20, P20EM
When used in conjunction with sloped tops, PROLINE frames
provide an excellent solution for configuring and joining multiple
consoles into a large control installation. Joining enclosures frameto-frame provides uninterrupted space for wiring and additional
equipment. The sloped top and frame can also be used individually as
a stand-alone console.
The modular design of the frames provides maximum mounting
flexibility. Choose from a variety of door and cover options. A full
range of accessories is also available. See the Modular Enclosure
Systems chapter for additional external and internal accessories that
fit 700mm-tall frames
Operator Interface
Enclosure Systems
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-71
Frame Base for PROLINE® Sloped Top
OI Enclosure System
PROLINE Joining Kits
Joining Kit for top-to-frame (PJSTF_)
OI-72
Mounting Options
Bulletin
P9, P20, P20EM
Joining kits permit joining two 700mm frames while maintaining an
environmental seal. Joining kit for side-to-side applications (PJ2FW7)
fits on either side of the frame.
Top-to-frame joining kits allow sloped tops to be attached to 700mm
PROLINE frames or to wall-mount kit. Kits available for one sloped
top and one frame, or one 1200mm wide sloped top on two joined
frames. Kits include gasket and mounting hardware.
Catalog Number
Description
pj2fw7
pjstf6
pjstf8
pjstf12
Joins frames side-to-side under OI sloped tops
Joins OI sloped top to 600 x 600 frame
Joins OI sloped top to 800 x 600 frame
Joins OI sloped top to 1200 x 600 frame
Joining Kit for side-to-side (PJ2FW7)
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Frame Base for PROLINE® Sloped Top
OI Enclosure System
Mounting Options
Bulletin
P9, P20, P20EM
Ergonomic Design
For ordering the operator interface enclosure and
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
Operator Interface
Enclosure Systems
accessories that provide optimum ergonomic design
for your operators, we developed the Ergonomics
Reference Guide below. By knowing the height of each
piece that is part of the Operator Interface Enclosure
System, you can design a workstation that provides
optimum effectiveness and safety for your operators.
The adjustable keyboard and swivel/tilt accessories
provide additional ergonomic solutions.
© 2007 Hoffman Enclosures Inc.
OI-73
Pedestals and Pedestal Accessories for
PROLINE® Sloped Top
OI Enclosure System
Pedestal with Legs
Pedestal is available in two
heights. Vertical tube has rigid
one-piece construction. Bottom
of tube is open. Four sturdy
die-cast legs bolt to vertical
tube. Legs have holes for bolting
pedestal to the floor. Legs
will accept casters in limited
applications. Heavy duty black
polymer caps fit on ends of
legs to cover bolts or levelers.
Pedestal has ANSI 61 medium
gray or RAL 7035 textured light
gray polyester powder paint
finish. Tapped mounting holes
in the top of pedestal allow
attachment to operator interface
base with cutout, swivel, swivel
tilt, or angle adapter. Hardware
and gasket to attach enclosure
are included.
Bolt-Down Pedestal
Bolt-down pedestal is available
in two heights. The vertical tube
has rigid one-piece construction.
Rigid cast aluminum base flanges
bolt to the vertical tube. Pedestal
has ANSI 61 medium gray or
RAL 7035 textured light gray
polyester powder paint finish.
Tapped mounting holes in the
top of pedestal allow attachment
to operator interface base with
cutout, swivel, swivel tilt, or
angle adapter. Hardware and
gasket to attach enclosure are
included.
OI-74
Catalog
Number
AP26L88
AP26L88LG
AP36L88
AP36L88LG
Catalog
Number
AP33B88LG
AP23B88
AP23B88LG
AP33B88
Mounting Options
Bulletin
P1, P1S
AxBxC
Finish
Description A (in.)
A (mm)
26.0 x 8.0 x 8.0
(660 x 203 x 203)
26.0 x 8.0 x 8.0
(660 x 203 x 203)
36.0 x 8.0 x 8.0
(914 x 203 x 203)
36.0 x 8.0 x 8.0
(914 x 203 x 203)
ANSI 61
Steel
26.00
660
RAL 7035
Steel
26.00
660
ANSI 61
Steel
36.00
914
RAL 7035
Steel
36.00
914
AxBxC
Finish
Description
A (in.)
A (mm)
33.0 x 8.0 x 8.0
(838 x 203 x 203)
23.0 x 8.0 x 8.0
(584 x 203 x 203)
23.0 x 8.0 x 8.0
(584 x 203 x 203)
33.0 x 8.0 x 8.0
(838 x 203 x 203)
RAL 7035
Steel
33.00
838
ANSI 61
Steel
23.00
584
RAL 7035
Steel
23.00
584
ANSI 61
Steel
33.00
838
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Mounting Options
Pedestals and Pedestal Accessories for
PROLINE® Sloped Top
OI Enclosure System
Extension
Pedestal extension can be
used with pedestals to provide
additional 6 inches (152mm)
of height for standing position.
Finished with ANSI 61 medium gray
polyester powder paint or
RAL 7035 textured light gray
polyester powder paint.
Bulletin
P1, P1S
Finish
Material
APE688
APE688LG
ANSI 61
RAL 7035
Steel
Steel
Catalog Number
A (in.)
A (mm)
Description
AP36SS
36.0
914
Stainless steel
Operator Interface
Enclosure Systems
Catalog Number
Stainless Steel Pedestal
Pedestal is 36 inches (914mm) tall
and provides optimal viewing and
operating height. Tube is 14 gauge
Type 304 one-piece construction.
Legs are 7 gauge Type 304 for
rigidity. Cable access plate and leg
levelers are included. Leg levelers
can be removed for anchoring
pedestal to floor. Pedestal has
smooth vertical brushed finish.
NOTE: Pedestal will accept pedestal
accessories that are not stainless steel.
These include swivel tilt, swivel, and
angle adapters.
Stainless Steel Extension
Pedestal extension can be ordered
separately to provide additional
6 inches (152mm) of height for
standing position. Extension is 14
gauge Type 304 stainless steel with
a smooth brushed finish.
Catalog Number
Description
APE6SS
Stainless steel
NOTE: Extension will accept pedestal
accessories that are not stainless steel.
These include swivel tilt, swivel, and
angle adapters.
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-75
Mounting Options
Pedestals and Pedestal Accessories for
PROLINE® Sloped Top
OI Enclosure System
Bulletin
P1, P1S
Selection Matrix Pedestals and Pedestal Accesories
PST466 PST566 PST766 PST766SS PST786 PST7A126 PST5A66 PST5A66SS PST5A86 PST5A126 PST7A66 PST7A66SS PST7A86 PST7A126
400
500
700
700
700
700A
500A
500A
500A
500A
700A
700A
700A
700A
Pedestal with Legs a
AP36L88 or
AP36L88LG
AP26L88 or
AP26L88LG
•
•
•
•
NR
NR
•
•
NR
NR
•
•
NR
NR
•
•
•
•
NR
NR
•
•
NR
NR
•
•
NR
NR
•
•
•
•
NR
b
•
•
NR
b
•
•
NR
b
•
•
•
•
NR
b
•
•
NR
b
•
•
NR
b
•
•
NR
NR
•
•
NR
NR
•
•
NR
NR
•
•
•
•
NR
NR
NR
NR
NR
NR
•
•
•
•
•
•
•
•
NR
NR
•
NR
NR
•
•
NR
Bolt-Down Pedestal a
AP33B88 or
AP33B88LG
AP23B88 or
AP23B88LG
Stainless Steel Pedestal a
AP36SS
•
Pedestal Accessories a
•
ASWV88
•
•
•
•
NR
•
AST88
•
•
•
•
NR
•
AAA1588
•
•
•
•
NR
NR
•
APE688 or
•
•
•
•
NR
NR
•
APE688LG
APE6SS
•
•
•
•
NR
NR
•
a Pedestals and pedestal accessories are designed to be used with PBSK66 or PBSK66SS bases.
b Two bolt-down pedestals can be used to support 1200mm-wide sloped tops.
NR Not recommended.
OI-76
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Pedestals and Pedestal Accessories for
PROLINE® Sloped Top
OI Enclosure System
Swivel Tilt
Swivel
A swivel mechanism can be used
to allow a machine operator
a way to easily rotate an
operator interface enclosure
to a convenient operating
position. Maximum rotation is
350 degrees. The low profile
swivel has a large center opening
in addition to a large, wobblefree bearing surface. Integral
stops are provided at 30-degree
increments between 60 degrees
and 180 degrees of rotation.
Swivel mechanism can be locked
in any position. The swivel mechanism is designed for use between
the bottom of an operator interface enclosure and a pedestal.
Do not use the swivel between an overhead support and an
enclosure.
The swivel is cast aluminum with an anodized finish. Mounting
hardware and gaskets are furnished.
Bulletin
P1, P1S
Catalog Number
Description
AST88
8 x 8 Swivel Tilt
Catalog Number
Description
ASWV88
8 x 8 Swivel
Operator Interface
Enclosure Systems
The use of a combination
swivel and tilt mechanism
allows a machine operator to
rotate and also tilt an operator
interface enclosure for optimum
viewing and safe operation.
The swivel tilt is designed for
use between the bottom of an
operator interface enclosure
and a pedestal (enclosure
reinforcement may be required).
Do not use the swivel tilt
between an overhead
support and an enclosure.
The swivel feature allows
maximum rotation of 350
degrees. Integral stops
are provided at 30-degree
increments between 60 degrees
and 180 degrees of rotation. Swivel can be locked in any position.
The tilt feature allows forward and backward movement up to 30
degrees from horizontal. The tilt lock has a large release knob that
allows quick incremental adjustment. Top and bottom flanges allow
easy installation on pedestals. A large center opening accommodates
control cables that have attached plugs. The swivel tilt is cast
aluminum with an anodized finish. Mounting hardware and gaskets
are furnished.
Mounting Options
Swivel and Swivel Tilt Loading
Catalog Number
Maximum Enclosure Size Maximum Load
A x B x C in. (mm)
Including Enclosure
ast88
(8 x 8 Swivel Tilt)
aswv88
(8 x 8 Swivel)
838 x 610 x 610
(33.0 x 24.00 x 24.00)
838 x 610 x 610
(33.00 x 24.00 x 24.00)
150 lbs.
200 lbs.
The loads listed assume that the additional load is centered on the
front or back of the enclosure. Please contact Hoffman for specific
application information.
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-77
Pedestals and Pedestal Accessories for
PROLINE® Sloped Top
OI Enclosure System
Angle Adapter
Bulletin
P1, P1S
Catalog Number
Angle adapter fits top of pedestal
and provides a fixed tilt of 15
degrees from horizontal for
enclosure mounting. Angle
adapter is aluminum with large
cable opening. Finish is clear
anodized aluminum.
Mounting hardware
is included.
Handles
Mounting Options
AAA1588
Catalog Number
Description
puhk
puhka
Die-cast aluminum handles, 2 per pkg.
Tubular steel handles with soft coating, 2 per pkg.
Handles attach to sides, top, or bottom of sloped top to provide
maximum operator control when using the suspension system,
swivel or swivel tilt. Handle length is 9.75 inches. Location dimples
on the sides of sloped tops indicate drill hole location for standard
mounting. Handles attach inside enclosure.
OI-78
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Pedestals and Pedestal Accessories for
PROLINE® Sloped Top
OI Enclosure System
Mounting Options
Bulletin
P1, P1S
Pedestal Caster Kits
Casters can be used on pedestals
in limited applications. They are
fitted to the die-cast legs of steel
pedestals. Casters are also available
for stainless steel pedestals
(AC4M6ST). Four dual-wheel
casters replace furnished levelers.
AC4M6SV a
EMRCK
AC4M6ST a
Height (in.) b
(2) casters, swivel type with 3.72
brakes for steel pedestals
(4) casters, swivel non2.76
locking for steel pedestals
(2) casters, stationary type 3.72
Load Rating
Height (mm) b Wheel Dia. (in.) Wheel Dia. (mm) Ea. (lb)
Load Rating Ea.
(kg)
Bulletin Number
94
3.00
76
210
95
C1, DEC1
70
1.97
50
132
60
C1, DEC1
94
3.00
76
210
95
C1, DEC1
a Two sets of casters are required.
b Height of caster when installed.
Stainless Steel Legs
Legs can be mounted to sloped
tops with a solid base. The legs
raise the sloped top 4 inches
(100mm) off the floor. The legs
are appropriate for hose-down
applications. Mounting hardware is
included.
Catalog Number
Description
Bulletin Number
PLEGSS
Stainless steel legs, 4 per pkg.
P20S
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-79
Operator Interface
Enclosure Systems
Catalog Number Description
Mounting Options
PROLINE® Sloped Top OI
Enclosure System
Selection Matrix: Mounting Options
Bulletin
Various
Component Selection Matrix Mounting Options
Sloped Top
A
B
C
Solid Base, 0mm
(Steel)
Solid Base, 0mm
(Stainless Steel)
Solid Base, 100mm
(Steel)
Solid Base, 100mm
(Stainless Steel)
Wall-Mount Kit
700mm Frame
400
600
600
PBS66
PBS66SS
PB166
PBS166SS
PWMK66
PF766
500
600
600
PBS66
PBS66SS
PB166
PBS166SS
PWMK66
PF766
700
600
600
PBS66
PBS66SS
PB166
PBS166SS
PWMK66
PF766
700
800
600
PBS66
PB166
PBS166SS
Double Wide Sloped Top
A
B
C
Solid Base, 0mm
(Steel)
Solid Base, 0mm
(Stainless Steel)
Solid Base, 100mm
(Steel)
Solid Base, 100mm
(Stainless Steel)
700
1200
600
PBS66 a
PBS66SS a
PB166a
PBS166SS a
Sloped Top with
Accessory Front
PF786
Wall-Mount Kit
A
B
C
Solid Base, 0mm
(Steel)
Solid Base, 0mm
(Stainless Steel)
Solid Base, 100mm
(Steel)
Solid Base, 100mm
(Stainless Steel)
Wall-Mount Kit
500A
600
600
PBS66
PBS66SS
PB166
PBS166SS
PWMK66
500A
800
600
PBS66
PB166
PBS166SS
PB166
PBS166SS
700A
600
600
PBS66
700A
800
600
PBS66
Double Wide Sloped Top
with Accessory Front
PBS66SS
700mm Frame
PF766a OR PF7126
700mm Frame
PF766
PF786
PWMK66
PF766
PF786
A
B
C
Solid Base, 0mm
(Steel)
Solid Base, 0mm
(Stainless Steel)
Solid Base, 100mm
(Steel)
Solid Base, 100mm
(Stainless Steel)
500A
1200
600
PBS66 a
PBS66SS a
PB166a
PBS166SS a
PF766a OR PF7126
700A
1200
600
PBS66a
PBS66SS a
PB166a
PBS166SS a
PF766a OR PF7126
Wall-Mount Kit
700mm Frame
a
Two 600mm bases are required for 1200mm wide sloped tops.
OI-80
Subject to change without notice
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
PROLINE® Sloped Top OI
Enclosure System
Selection Matrix: Mounting Options
Mounting Options
Bulletin
various
Component Selection Matrix Mounting Options
Sloped Top
Base with Cutout
(Stainless Steel)
Pedestal with Legs
(Steel)
Pedestal
(Stainless Steel)
Bolt-Down Pedestal
Support Bracket b,c
A
B
C
PBSK66
PBSK66SS
AP36L88 or AP26L88
AP36SS
AP33B88 or AP23B88
PTS66
400
600
600
600
PBSK66
PBSK66SS
AP36L88 or AP26L88
AP36SS
AP33B88 or AP23B88
PTS66
500
600
PBSK66
PBSK66SS
AP36L88 or AP26L88
AP36SS
AP33B88 or AP23B88
PTS66
700
600
600
Not Recommended
Not Recommended
Not Recommended
Not Recommended
700
800
600
Pedestal with Legs
(Steel)
Pedestal
(Stainless Steel)
Base with Cutout
(Steel)
Base with Cutout
(Stainless Steel)
Double Wide Sloped Top
Bolt-Down Pedestal
Not Recommended
Support Bracket
b,c
Not Recommended
A
B
C
700
1200
600
Sloped Top with
Accessory Front
Base with Cutout
(Steel)
Base with Cutout
(Stainless Steel)
Pedestal with Legs
(Steel)
Pedestal
(Stainless Steel)
Bolt-Down Pedestal
Support Bracket b,c
A
B
C
PBSK66
PBSK66SS
AP36L88 or AP26L88
AP36SS
AP33B88 or AP23B88
PTS66
500A
600
600
Not Recommended
Not Recommended
Not Recommended
PTS66
500A
800
600
PBSK66
PBSK66SS
AP36L88 or AP26L88
AP36SS
AP33B88 or AP23B88
PTS66
700A
600
600
Not Recommended
Not Recommended
Not Recommended
Not Recommended
700A
800
600
Pedestal with Legs
(Steel)
Pedestal
(Stainless Steel)
Base with Cutout
(Steel)
Base with Cutout
(Stainless Steel)
Double Wide Sloped Top
with Accessory Front
Support Bracket b,c
A
B
C
Not Recommended
Not Recommended
500A
1200
600
Not Recommended
Not Recommended
700A
1200
600
Bolt-Down Pedestal
b
c
Use with COMPACT® Pendant Arm Series 4.
It Is not recommended to pendant-mount PROLINE OI sloped tops over 600mm wide.
Subject to change without notice
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-81
Operator Interface
Enclosure Systems
Base with Cutout
(Steel)
Mounting Options
COMPACT® Pendant Arm Series 1
Rev. A 5/07
Application
The COMPACT Pendant Arm Series 1 provides a flexible, easy-to
use method for mounting and positioning small operator interface
controls and instruments. Series 1 pendant arm models are furnished
as complete systems with ready-to-configure enclosure mounting
plates. This series is recommended as a mounting option for
INLINE® operator interface enclosures and other small operator
interface enclosures.
Series 1 pendant arms are manufactured from lightweight extruded
and cast aluminum. Special design features provide multiple mounting
options and allow movement in both horizontal and vertical
directions. This flexible series is easily attached to a machine or wall.
Construction
• Cast aluminum and extruded aluminum tube
• Four pre-assembled models. One model capable of horizontal and
vertical motion. One model capable of horizontal motion. Either
model is available in two lengths, 500mm or 800mm.
Bulletin
CS4
• Internal braking mechanism (vertical motion only) prevents
downward “free-fall” motion when locked
• Easily removable snap-on cover provides access to wire
containment channel
• Adjustable enclosure mounting. Arm can be configured to mount
to top, bottom, or back of an enclosure.
• Enclosure mounting plate can be rotated, tilted, and locked into
desired position
• Handle available as option
Finish
Tube is anodized. Color is silver. Fittings and snap-on cover are
RAL 7035 light gray polyester powder paint.
Industry Standards
NEMA/EEMAC Type 12
IEC 60529, IP55
DIN 40050
Standard Sizes Pendant Arm Series 1
Catalog Number
Description
L
Maximum Load
ccs1h5v
ccs1h8v
ccs1h5
ccs1h8
Vertical and horizontal motion
Vertical and horizontal motion
Horizontal motion
Horizontal motion
0.5M
0.8M
0.5M
0.8M
30 lbs.
15 lbs.
30 lbs.
15 lbs.
Handle
Catalog Number
Mounts to end of arm in pre-threaded hole. Black.
ccs1hdl
OI-82
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Mounting Options
COMPACT® Pendant Arm Series 1
Bulletin
CS4
Operator Interface
Enclosure Systems
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-83
Mounting Options
Rev. A 5/07
COMPACT® Pendant Arm Series 2
Bulletin
CS4
Construction
• Cast aluminum couplings and extruded aluminum tubing. Series
components provide excellent structural strength.
• Multiple coupling types and three standard tube lengths (500,
1000 and 1500mm) combine to form numerous configurations as
conduits for equipment wiring (see configuration guide)
• Removable access plates simplify cable installation inside fittings
• Heavy duty bearings in all movable joints for convenient, smooth
operation and enhanced durability
• Deep tube fittings in all couplings
• Adjustable set screws allow accurate alignment of supporting tubes
• Oil-resistant neoprene gasket
Finish
Couplings and access plates are RAL 7035 light gray polyester
powder paint. Tubing is anodized aluminum.
Industry Standards
NEMA/EEMAC Type 12
IEC 60529, IP55
DIN 40050
Application
The modular COMPACT Series 2 pendant arm provides a flexible
method for moving operator controls into a convenient position for
operator use and then moving them out of the way when not needed.
This series is recommended as a mounting option for CONCEPT®
operator interface enclosures in addition to COMPACT CC1
enclosures.
The Series 2 pendant arm system components include extruded
aluminum tubing, elbows, joints, and brackets. Configured
components can suspend an enclosure from the top or support
it from below. This flexible series is easily mounted to a machine,
wall, or floor. Special design features provide superior load-bearing
capacity and functional reliability.
Standard Cutout for Mounting
Dimension for Cutout
Set-Up Joint
mm (in.)
Vertical or Horizontal
Wall Joint
in. (mm)
Flange or Flange Elbow Coupling a
/Swivel Tilt Straight or 90º Elbow
in. (mm)
Wall Flange or Base Bracket
in. (mm)
Rotational Base
in. (mm)
ØD
40 (1.58)
70 (2.76)
40 (1.58)
—
40 (1.58)
E
90 (3.54)
90 (3.54)
60 (2.36)
90 (3.54)
90 (3.54)
F
90 (3.54)
110 (4.33)
60 (2.36)
90 (3.54)
90 (3.54)
ØG
9 (0.35)
9 (0.35)
7 (9.26)
9 (0.35)
9 (0.35)
a See product drawings for alternate shallow enclosure mounting.
OI-84
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Mounting Options
COMPACT® Pendant Arm Series 2
System Load Capacity
Bulletin
CS4
Load Diagram
The Series 2 pendant arm load graph shown below is the result of
load capacity tests. Please contact Hoffman for specific application
information.
Operator Interface
Enclosure Systems
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-85
Mounting Options
COMPACT® Pendant Arm Series 2
Bulletin
CS4
Tubes
Hollow aluminum extrusion.
Available in 500, 1000, and
1500mm lengths. Connection
components are fastened to
support arm with setscrews.
DIN 59411 and 2395.
Catalog
Number
CCS2T5
CCS2T10
CCS2T20
Length
Length
(mm)
500
1000
1500
(in.)
19.68
39.37
59.06
External
Dimensions
(mm)
45 x 60
45 x 60
45 x 60
External
Dimensions
(in.)
1.77 x 2.36
1.77 x 2.36
1.77 x 2.36
Set-Up Joint
Joint includes access plate for easy
wire installation. Turning range of
300 degrees. Cast aluminum finished
in RAL 7035 light gray polyester
powder paint. Setscrews, gasket,
and removable access plate are
included. Mounting fasteners are not
provided.
Wall Joint (Vertical)
Vertical joint includes access plate
for easy wire installation. Turning
range of 300 degrees. Cast aluminum
finished in RAL 7035 light gray
polyester powder paint. Set screws,
gasket, and removable access plate
are included. Mounting fasteners are
not provided.
OI-86
Wall Thickness Wall Thickness Inside Cross
Dimensions
Dimensions
Section
(mm)
8
8
8
(in.)
0.31
0.31
0.31
(cm2 )
12.65
12.65
12.65
Inside Cross
Section
(in.2 )
1.96
1.96
1.96
Catalog Number
Weight (lb)
ccs2sjlg
4.0
Catalog Number
Weight (lb)
CCS2WJVLG
5.0
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
Weight (lb)
4.5
9.0
14.0
© 2007 Hoffman Enclosures Inc.
Mounting Options
COMPACT® Pendant Arm Series 2
Wall Joint (Horizontal)
Includes access plates for easy wire
installation. Turning range of 300
degrees. Cast aluminum finished
in RAL 7035 light gray polyester
powder paint. Setscrews, gasket, and
removable access plates included.
Mounting fasteners not provided.
Joint is cast aluminum finished in RAL
7035 light gray polyester powder
paint. Turning range is 360 degrees
with stop. Includes access plates and
gasket. Use of the intermediate joint
reduces pendant arm load capacity
by 43 percent.
Heavy Duty Elbow
Elbow is made of aluminum with
increased wall thickness for
additional strength and support.
Setscrews for tube adjustment. Cast
aluminum finished in RAL 7035 light
gray polyester powder paint. All
installation hardware and gasket are
included.
Flange Coupling
Coupling is capable of 300-degree
rotation. Maintenance-free bearing is
steel and polyamide. Cast aluminum
finished in RAL 7035 light gray
polyester powder paint. Installation
hardware, mounting fasteners, and
gasket included.
CS4
Catalog Number
Weight (lb)
CCS2WJHLG
5.0
Catalog Number
Weight (lb)
ccs2ijlg
5.0
Catalog Number
Weight (lb)
ccs2ehdlg
3.0
Catalog Number
Weight (lb)
ccs2fclg
2.5
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Operator Interface
Enclosure Systems
Intermediate Joint
Bulletin
OI-87
Mounting Options
COMPACT® Pendant Arm Series 2
Flange Coupling 15°
Coupling is capable of 300° rotation.
Maintenance-free bearing is steel and
polyamide. Enclosure is mounted at
a 15° incline angle. Cast aluminum
finished in RAL 7035 light gray
polyester powder paint. Installation
hardware, mounting fasteners, and
gaskets included.
Flange Elbow Coupling
Turning range of 300 degrees.
Maintenance-free bearing is steel and
polyamide. Includes access plate for
easy wire installation. Cast aluminum
finished in RAL 7035 light gray
polyester powder paint. Installation
hardware, mounting fasteners, and
gasket included.
Flange Elbow Coupling 15°
Turning range of 300°. Maintenancefree bearing is steel and polyamide.
Includes access plate for easy wire
installation. Enclosure is mounted at
a 15° incline angle. Cast aluminum
finished in RAL 7035 light gray
polyester powder paint. Installation
hardware, mounting fasteners, and
gaskets included.
OI-88
Bulletin
CS4
Catalog Number
Weight (lb)
CCS2FC15LG
2.5
Catalog Number
Weight (lb)
ccs2feclg
3.0
Catalog Number
Weight (lb)
CCS2FEC15LG
3.1
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Mounting Options
COMPACT® Pendant Arm Series 2
Wall Flange/Base Bracket
Cast aluminum finished in RAL 7035
light gray polyester powder paint.
Set screws and gasket are included.
Mounting fasteners are not provided.
Bulletin
CS4
Catalog Number
Weight (lb)
CCS2WFBLG
2.5
Operator Interface
Enclosure Systems
Rotational Base
Turning range of 300 degrees. Cast
aluminum finished in RAL 7035
light gray polyester powder paint.
Setscrews and gasket are included.
Mounting fasteners are not provided.
Rotational Base Bracket
Turning range of 300°. Cast
aluminum finished in RAL 7035
light gray polyester powder paint.
Setscrews and gaskets are included.
Mounting fasteners are not provided.
Catalog Number
Weight (lb)
CCS2RBLG
3.5
Catalog Number
Weight (lb)
CCS2RBBLG
2.7
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-89
Mounting Options
COMPACT® Pendant Arm Series 2
Rotational Base Bracket 15°
Turning range of 300°. Enclosure
is mounted at a 15° incline angle.
Cast aluminum finished in RAL 7035
light gray polyester powder paint.
Setscrews and gaskets are included.
Mounting fasteners are not provided.
Swivel Tilt Straight
Mounts between pendant arm
and operator interface enclosure
to provide both swivel and tilt
options for the machine operator.
Swivel allows 300-degree maximum
rotation. Tilt allows infinite
adjustment from horizontal to 30
degrees. Cast aluminum finished
in RAL 7035 light gray polyester
powder paint. Installation hardware,
mounting fasteners, and gasket
included.
OI-90
Bulletin
CS4
Catalog Number
Weight (lb)
CCS2RBB15LG
2.7
Catalog Number
Weight (lb)
CCS2STLG
7.0
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Mounting Options
COMPACT® Pendant Arm Series 2
Swivel Tilt 90° Elbow
Pedestal Base
Catalog Number
Weight (lb)
CCS2ESTLG
7.5
Catalog Number
Base is cast aluminum one-piece
construction finished with RAL
7035 light gray textured polyester
powder paint. Includes all hardware
for attaching tubes.
Monitor Platform
Monitor Platform
CS4
Operator Interface
Enclosure Systems
Mounts between pendant arm
and operator interface to provide
both swivel and tilt options for the
machine operator. A 90-degree
elbow is incorporated into this
design. Swivel allows 300-degree
maximum rotation. Tilt allows
infinite adjustment from horizontal
to 30 degrees. Cast aluminum
finished in RAL 7035 light gray
polyester powder paint. Installation
hardware, mounting fasteners, and
gasket are included.
Bulletin
CCS2PB
Catalog Number
Platform attaches to pendant arm
to provide a surface for a monitor.
Adjustable stops hold monitor
securely in place. Aluminum
construction finished with RAL 7042
gray polyester powder paint.
CCS1MP
Keyboard Tray on
Keyboard Frame
Keyboard Frame
Mounts to monitor platform. Frame locks at desired position by
tightening knobs. Chrome plated finish.
Keyboard Tray
Tray attaches to keyboard frame. Provides a surface for a PC mouse
as well as a platform for a keyboard. Aluminum construction finished
with RAL 7042 gray polyester powder paint.
Catalog Number
CCS1KBF
Catalog Number
CCS1KBT
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-91
Mounting Options
COMPACT® Pendant Arm Series 2
Configurations
Bulletin
CS4
1
Description
Qty.
Catalog Number
Set up joint
1
ccs2slg
Heavy duty elbow
1
ccs2ehdlg
Flange coupling or
Swivel tilt
1
1
ccs2fclg
ccs2stlg
2 and 3
Description
Qty.
Catalog Number
Wall joint (horizontal)
1
ccs2wjhlg
Heavy duty elbow
1
ccs2ehdlg
Flange coupling or
Swivel tilt or
Flange coupling 15º
1
1
1
ccs2fclg
ccs2stlg
ccs2fc15lg
4 and 5
Description
Qty.
Catalog Number
Set up joint
1
ccs2sjlg
Heavy duty elbow
1
ccs2ehdlg
Flange coupling or
Swivel tilt
1
1
ccs2fclg
ccs2stlg
6
Description
Qty.
Catalog Number
Wall flange/base bracket
1
ccs2wfblg
Flange elbow coupling or
90º Swivel tilt or
Flange elbow coupling 15º
1
1
1
ccs2feclg
ccs2estlg
ccs2fec15lg
7 and 8
Description
Qty.
Catalog Number
Wall flange/base bracket
1
ccs2wfblg
Heavy duty elbow
1
ccs2ehdlg
Flange coupling or
Swivel tilt
1
1
ccs2fclg
ccs2stlg
9
Description
Qty.
Catalog Number
Set-up joint
1
ccs2sjlg
Flange elbow coupling or
90º Swivel tilt
1
1
ccs2feclg
ccs2estlg
10 and 11
Description
Qty.
Catalog Number
Wall joint (horizontal)
1
ccs2wjhlg
Flange elbow coupling or
90º Swivel tilt
1
1
ccs2feclg
ccs2estlg
12 and 13
OI-92
Description
Qty.
Catalog Number
Wall joint (vertical)
1
ccs2jvlg
Flange coupling or
Swivel tilt
1
1
ccs2fclg
ccs2stlg
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
COMPACT® Pendant Arm Series 2
Configurations
Mounting Options
Bulletin
CS4
14
Description
Qty.
Catalog Number
Rotational base
1
ccs2rblg
Heavy duty elbow
2
ccs2ehdlg
Flange coupling or
Swivel tilt
1
1
ccs2fclg
ccs2stlg
15
Qty.
Catalog Number
Set up joint
1
ccs2sjlg
Intermediate joint
1
ccs2ijlg
Heavy duty elbow
1
ccs2ehdlg
Flange coupling or
Swivel tilt
1
1
ccs2fclg
ccs2stlg
Operator Interface
Enclosure Systems
Description
16 and 17
Description
Qty.
Catalog Number
Wall Joint (horizontal)
1
ccs2wjhlg
Intermediate joint
1
ccs2ijlg
Heavy duty elbow
1
ccs2ehdlg
Flange coupling or
Swivel tilt
1
1
ccs2fclg
ccs2stlg
18
Description
Qty.
Catalog Number
Set up joint
1
ccs2sjlg
Intermediate joint
1
ccs2ijlg
Flange elbow coupling or
90º Swivel tilt
1
1
ccs2feclg
ccs2estlg
19 and 20
Description
Qty.
Catalog Number
Wall joint (horizontal)
1
ccs2wjhlg
Intermediate joint
1
ccs2ijlg
Flange elbow coupling or
90º Swivel tilt
1
1
ccs2feclg
ccs2estlg
21 and 22
Description
Qty.
Catalog Number
Wall flange/base bracket
1
ccs2wfblg
Heavy duty elbow
1
ccs2ehdlg
Flange coupling or
Swivel tilt
1
1
ccs2fclg
ccs2stlg
Note to the Specifier:
1. Select pendant system sizing using the COMPACT Series 2 load
capacity chart.
2. Tube catalog numbers are not included in configuration tables.
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-93
Mounting Options
Rev. A 5/07
COMPACT® Pendant Arm Series 4
Bulletin
CS4
Construction
• Heavy cast steel and cast aluminum couplings and heavy wall steel
tubing provide excellent structural strength
• Each system includes multiple coupling types and three standard
tube lengths (.5m, 1m, and 2m) which combine to form numerous
configurations
• Steel tubing has 5mm (0.2-inch) wall thickness. Tubing is coldformed welded square and rectangular steel tubes
• Tubing provides structural integrity and acts as a conduit for
equipment wiring
• Removable access plates (provided with set-up joint, elbow, and
elbow couplings) simplify cable installation inside tubing
• Heavy-duty bearings in all movable joints for convenient, smooth
operation and enhanced durability to withstand stresses of
repeated use
• Deep tube fittings in all couplings
• Adjustable setscrews allow for accurate alignment of supporting
tubes
• Optional pedestal base available
• Gasket is oil-resistant neoprene
Finish
Couplings are RAL 7035 light gray polyester powder paint. Access
plates and tubing are light gray. Bellows are black.
Application
Modular COMPACT pendant arm systems are used to suspend
machine and process control equipment, including operator interface
computers. Controls mounted on a pendant arm system can be easily
moved into a convenient position for use and then moved out of the
way when not needed. Four sizes are available:
System 50 (50mm x 50mm square tube)
System 60 (60mm x 60mm square tube)
System 80 (80mm x 80mm square tube)
System 80/140 (80mm x 140mm rectangular tube)
Supporting tubes, elbows, brackets, movable joints, and flanged
couplings are available that can be sized and configured to the specific
application and for eventual mounting to a machine or to a wall.
Standard Cutouts for Mounting
Industry Standards
NEMA/EEMAC Type 12
IEC 60529, IP55
DIN 40050
Dimensions 50
for Cutouts (mm)
Set-Up Joint
50
(in.)
60
(mm)
60
(in.)
80
(mm)
80
(in.)
80/140 80/140
(mm) (in.)
Ø D MAX
E
F
ØG
2.75
3.47
3.47
0.43
70
97
97
11
2.75
3.82
3.82
0.43
105
122
122
13
4.13
4.82
4.82
0.51
140
200
200
13
5.51
7.87
7.87
0.51
60
60
115
10
2.36
2.36
4.53
0.41
80
80
138
13
3.15
3.15
5.43
0.51
60
185
125
13
3.15
7.28
4.92
0.51
70
93
93
11
2.75
3.66
3.66
0.43
105
122
122
13
4.13
4.80
4.80
0.51
105
185
125
13
4.13
7.28
4.92
0.51
70
88
88
11
Wall Joint or Cable Wall Joint
Ø D MAX
E
F
ØG
50
50
107
10
1.97
1.97
4.21
0.41
Wall Flange or Base Bracket
Ø D MAX
E
F
ØG
Standard Coupling or
Standard Elbow Coupling System
ØM
(mm)
ØM
(in.)
ØN
(mm)
ØN
(in.)
50
8
0.33
51
2.01
70
88
88
11
2.75
3.46
3.46
0.43
Flange Coupling or Flange Elbow Coupling
Ø D MAX
E
F
ØG
51
60
60
7
2.01
2.36
2.36
0.26
65
60
60
7
2.56
2.36
2.36
0.26
91
80
80
7
3.58
3.15
3.15
0.26
154
160
160
7
6.06
6.30
6.30
0.26
2.01
3.15
4.72
0.26
65
80
120
7
2.56
3.15
4.72
0.26
91
80
120
7
3.58
3.15
4.72
0.26
154
80
190
7
6.05
3.15
7.48
0.34
Angle Adapter Plate
Ø D MAX
E
F
ØG
OI-94
51
80
120
7
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Mounting Options
COMPACT® Pendant Arm Series 4
System Load Capacity
Bulletin
CS4
Load Diagram
The Series 4 pendant arm load graph is the result of load capacity
tests. Please contact Hoffman for specific applications information.
Operator Interface
Enclosure Systems
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-95
Mounting Options
COMPACT® Pendant Arm Series 4
Bulletin
CS4
Tube Sizes
Square and rectangular tubes are
cold-formed hollow welded steel
with 5mm wall thickness. Finish
is RAL 7035 light gray polyester
powder paint.
Tubing provides structural
integrity and acts as a conduit for
equipment wiring. Available in
500, 1000, and 2000mm lengths.
All pendant arm connections
are sized to fit appropriate tube
sizes.
System 50
50 x 50mm
System 60
60 x 60mm
System 80
80 x 80mm
System 80/140
80 x 140mm
Catalog Number
System
Size
Actual
Length
(mm)
CCS5T5
CCS5T10
CCS5T20
CCS6T5
CCS6T10
CCS6T20
CCS8T5
CCS8T10
CCS8T20
CCS14T5
CCS14T10
CCS14T20
50
50
50
60
60
60
80
80
80
80/140
80/140
80/140
50 x 50
50 x 50
50 x 50
60 x 60
60 x 60
60 x 60
80 x 80
80 x 80
80 x 80
80 x 140
80 x 140
80 x 140
489
991
1988
489
991
1988
489
991
1988
489
991
1988
Actual
Length
(in.)
External
Dimensions
(mm)
External
Wall Thickness
Dimensions Dimensions
(in.)
(mm)
Inside Cross
Wall Thickness Section sq.
Dimensions (in.) cm/sq. in.
Weight (lb)
19.25
39.00
78.25
19.25
39.00
78.25
19.25
39.00
78.25
19.25
39.00
78.25
50 sq.
50 sq.
50 sq.
60 sq.
60 sq.
60 sq.
80 sq.
80 sq.
80 sq.
80 x 140
80 x 140
80 x 140
1.97
1.97
1.97
2.36
2.36
2.36
3.15
3.15
3.15
3.15 x 5.51
3.15 x 5.51
3.15 x 5.51
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
7.6
15.1
30.2
9.3
18.6
37.1
13.0
24.5
49.0
17.0
33.0
66.0
5
5
5
5
5
5
5
5
5
5
5
5
2.48/16
2.48/16
2.48/16
3.88/25
3.88/25
3.88/25
7.60/49
7.60/49
7.60/49
14.11/91
14.11/91
14.11/91
Set-Up Joint
Cast iron finished with RAL 7035
light gray polyester powder paint.
Mounts equipment to horizontal
surface. Permits pendant arm to
be rotated or turned 306 degrees.
Pivot bearing is maintenance-free.
Setscrews, removable access plate,
and gasket are included. (Mounting
hardware not provided.)
Catalog
Number
System
CCS5SJLG
50
CCS6SJRLG
60
CCS8SJLG
80
CCS14SJLG
80/140
OI-96
L each
side
mm (in.)
H
mm (in.)
D
mm (in.)
E
mm (in.)
F
mm (in.)
134
(5.28)
144
(5.67)
174
(6.85)
260
(10.24)
132
(5.20)
152
(5.98)
6.38
(162)
8.86
(225)
41
(1.59)
46
(1.79)
56
(2.19)
85
(3.35)
90
(3.54)
105
(4.13)
120
(4.72)
155
6.10)
92
(3.62)
97
(3.82)
107
(4.21)
141
(5.55)
mm (in.)
I
mm (in.)
J
mm (in.)
K each
side
mm (in.)
M each
side
O
mm (in.) mm (in.)
ØQ
mm (in.)
Wt.
(lb)
45
(1.78)
55
(2.16)
75
(2.95)
140
(5.51)
25
(0.98)
25
(0.98)
25
(0.98)
34
(1.34)
14
(0.55)
14
(0.55)
12
(0.47)
12
(0.47)
50
(1.97)
60
(2.36)
80
(3.15)
80 x 140
(3.15 x 5.51)
88
(3.47)
97
(3.82)
122
(4.80)
200
(7.87)
11
(0.43)
11
(0.43)
13
(0.51)
13
(0.51)
20.5
ØG
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
108
(4.25)
118
(4.65)
152
(5.98)
232
(9.14)
28.5
45.5
63.0
© 2007 Hoffman Enclosures Inc.
Mounting Options
COMPACT® Pendant Arm Series 4
Bulletin
CS4
Wall Joint
Catalog
Number
System
CCS5WJRLG
50
CCS6WJRLG
60
CCS8WJRLG
80
CCS14WJRLG 80/140
D
mm (in.)
E
mm (in.)
F
mm (in.)
G
mm (in.)
H each side I
mm (in.)
mm (in.)
J
mm (in.)
ØK
mm (in.)
L
mm (in.)
M
mm (in.)
131
(5.16)
141
(5.55)
161
(6.34)
170
(6.69)
74
(2.91)
84
(3.30)
104
(4.09)
230
(9.06)
107
(4.21)
115
(4.53)
138
(5.43)
125
(4.92)
50
(1.97)
60
(2.36)
80
(3.15)
185
(7.28)
50
(1.97)
60
(2.36)
80
(3.15)
80 x 140
(3.15 x 5.51)
65
(2.55)
70
(2.76)
100
(3.94)
155
(6.10)
11
(0.41)
11
(0.41)
13
(0.51)
13
(0.51)
75
(2.95)
90
(3.54)
135
(5.31)
162
(6.38)
10
(0.39)
10
(0.39)
10
(0.39)
12
(0.47)
190
(7.48)
210
(8.27)
300
(11.81)
392
(15.43)
Wt. (lb)
8.7
11.8
21.6
37.9
Cable Wall Joint
Welded steel plate construction
finished with RAL 7035 light gray
polyester powder paint. Mounts
equipment to vertical surface.
Provides cable access to inside of
pendant system from above or
below. Swivel range approximately
180 degrees. Includes bellows
with zipper, seal, and setscrews.
Adjustable tension at pivot point.
Rotation limiter is optional.
(Mounting hardware not provided.)
Catalog
Number
D
mm (in.)
E
mm (in.)
F
mm (in.)
G
mm (in.)
H each side I
mm (in.)
mm (in.)
J
mm (in.)
ØK
mm (in.)
L
mm (in.)
M
mm (in.)
N
mm (in.)
P
mm (in.)
Weight
(lb)
CCS5WJCRLG
131
(5.16)
141
(5.55)
165
(6.50)
74
(2.91)
84
(3.30)
104
(4.09)
107
(4.21)
115
(4.53)
138
(5.43)
50
(1.97)
60
(2.36)
80
(3.15)
50
(1.97)
60
(2.36)
80
(3.15)
60
(2.36)
70
(2.76)
100
(3.94)
11
(0.41)
11
(0.41)
13
(0.51)
105
(4.13)
120
(4.72)
165
(6.50)
10
(0.39)
10
(0.39)
10
(0.39)
15
(0.59)
15
(0.59)
20
(0.79)
40
(1.57)
50
(1.97)
60
(2.36)
10.4
CCS6WJCRLG
CCS8WJCRLG
220
(8.66)
240
(9.45)
330
(12.99)
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
14.6
20.9
OI-97
Operator Interface
Enclosure Systems
Welded steel plate construction
finished with RAL 7035 light gray
polyester powder paint. Mounts
equipment to vertical surface. Swivel
range is approximately 180 degrees.
Includes bellows with zipper, seals,
and setscrews (mounting fasteners
are not included). Adjustable tension
at pivot point. Rotational limiter is
optional. (Mounting hardware not
provided.)
Mounting Options
COMPACT® Pendant Arm Series 4
Bulletin
CS4
Wall Flange
Wall flange expands mounting
options to include wall-mount as
well as horizontal tube applications.
Cast iron construction finished
with RAL 7035 light gray polyester
powder paint. Setscrews, gasket,
and seals are included. (Mounting
hardware not provided.)
Catalog
Number
System
CCS5WFLG
50
CCS6WFLG
60
CCS8WFLG
80
CCS14WFLG 80/140
L each side
mm (in.)
H
mm (in.)
D
mm (in.)
E
mm (in.)
F
mm (in.)
G each side I
mm (in.)
mm (in.)
J
mm (in.)
ØM
mm (in.)
134
(5.28)
140
(5.5)
174
(6.85)
175 x 235
(6.89 x 9.25)
117
(4.60)
125
(4.92)
160
(6.30)
190
(7.48)
88
(3.46)
93
(3.66)
122
(4.80)
125
(4.92)
88
(3.46)
93
(3.66)
122
(4.80)
185
(7.28)
104
(4.09)
112
(4.41)
143
(5.63)
173
(6.81)
50
(1.97)
60
(2.36)
80
(3.15)
80 x 140
(3.15 x 5.51)
20
(0.79)
20
(0.79)
25
(0.98)
25
(0.98)
11
(0.43)
11
(0.43)
13
(0.51)
13
(0.51)
9
(0.35)
9
(0.35)
12
(0.47)
12
(0.47)
Weight (lb)
9.4
10.8
20.1
28.5
Intermediate Joint
Welded steel plate construction
finished with RAL 7035 light gray
polyester powder paint. Mounts
to pendant tube. Swivel range
is approximately 180 degrees.
Setscrews and bellows with zipper
are included. Rotational limiter is
optional.
OI-98
Catalog
Number
System
CCS5IJRLG
50
CCS6IJRLG
60
CCS8IJRLG
80
CCS14IJRLG
80/140
D
mm (in.)
E each side
mm (in.)
F
mm (in.)
G
mm (in.)
H
mm (in.)
300
(11.81)
310
(12.20)
400
(15.75)
540
(21.26)
50
(1.97)
60
(2.36)
80
(3.15)
80 x 140
(3.15 x 5.51)
230
(9.06)
240
(9.45)
330
(12.99)
460
(18.11)
65
(2.56)
70
(2.76)
100
(3.94)
155
(6.10)
65
(2.56)
70
(2.76)
100
(3.94)
155
(6.10)
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
Weight (lb)
9.7
13.1
21.4
39.9
© 2007 Hoffman Enclosures Inc.
Mounting Options
COMPACT® Pendant Arm Series 4
Bulletin
CS4
Elbow
Cast aluminum finished with RAL
7035 light gray polyester powder
paint for Systems 80/140. Removable
access plate. Setcrews and gaskets
are included.
System
CCS14ELLG
80/140
L
mm (in.)
W
mm (in.)
D
mm (in.)
E
mm (in.)
F
mm (in.)
G each side
mm (in.)
110
(4.33)
250
(9.84)
80
(3.15)
88
(3.46)
168
(6.61)
80 x 140
(3.15 x 5.51)
L
mm (in.)
W
mm (in.)
D
mm (in.)
E
mm (in.)
F
mm (in.)
G each side
mm (in.)
78
(3.07)
88
(3.46)
108
(4.25)
165
(6.50)
190
(7.48)
8.86
(225)
90
(3.45)
105
(4.13)
120
(4.72)
35
(1.38)
40
(1.57)
50
(1.97)
125
(4.92)
145
(5.71)
170
(6.69)
50
(1.97)
60
(2.36)
80
(3.15)
Weight (lb)
15.5
Heavy Duty Elbow
Cast steel finished with RAL 7035
light gray polyester powder paint for
Systems 50, 60, and 80. Removable
access plate. Setscrews and gaskets
are included.
Catalog
Number
System
CCS5ELLG
50
CCS6ELLG
60
CCS8ELLG
80
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Weight (lb)
9.9
13.2
18.7
OI-99
Operator Interface
Enclosure Systems
Catalog
Number
Mounting Options
COMPACT® Pendant Arm Series 4
Bulletin
CS4
Flange Coupling
Flange coupling mounts to enclosure,
enabling enclosure to be rotated
300 degrees (System 50, 60, and 80)
or 330 degrees (System 80/140).
Enclosure can be locked in position.
Safety stop and maintenance-free
bearing. Finish is RAL 7035 light gray
polyester powder paint. Includes
installation instructions, setscrews,
gaskets, and mounting hardware.
Catalog
Number
System
CCS5FCLG
50
CCS6FCLG
60
CCS8FCLG
80
CCS14FCLG
80/140
L each side
mm (in.)
D each side
mm (in.)
E
mm (in.)
Ø. F
mm (in.)
G each side
mm (in.)
100
(3.94)
100
(3.94)
120
(4.72)
220
(8.66)
50
(1.97)
60
(2.36)
80
(3.15)
80 x 140
(3.15 x 5.51)
43
(1.69)
43
(1.69)
53
(2.09)
80
(3.15)
50
(1.97)
64
(2.52)
91
(3.58)
142
(6.06)
60
(2.36)
60
(2.36)
80
(3.15)
160
(6.30)
Weight (lb)
3.5
5.5
7.2
10.1
Flange Elbow Coupling
Coupling mounts to enclosure,
enabling enclosure to be rotated
300 degrees (System 50, 60, and 80)
or 330 degrees (System 80/140).
Enclosure can be locked in position.
Removable access plates. Finish
is RAL 7035 light gray polyester
powder paint. Setscrews, gasket, and
mounting hardware are included.
Catalog
Number
CCS5FECLG
L
each side H
mm (in.) mm (in.)
100
(3.94)
CCS6FECLG 100
(3.94)
CCS8FECLG 120
(4.72)
CCS14FECLG 220
(8.66)
OI-100
141
(5.55)
151
(5.95)
173
(6.81)
220
(8.66)
D
each side
mm (in.)
E
mm (in.)
F
mm (in.)
G
mm (in.)
mm (in.)
J
each side K
mm (in.) mm (in.)
50
(1.97)
60
(2.36)
80
(3.15)
80 x 140
(3.15 x 5.51)
60
(2.36)
70
(2.76)
90
(3.54)
80
(3.15)
34
(1.34)
34
(1.34)
54
(2.13)
100
(3.94)
106
(4.17)
111
(4.37)
121
(4.76)
138
(5.43)
50
(1.97)
64
(2.52)
91
(3.58)
154
(6.06)
60
(2.36)
60
(2.36)
80
(3.15)
160
(6.30)
ØI
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
144
(5.67)
154
(6.06)
204
(8.03)
290
(11.42)
Weight
(lb)
4.5
7.0
9.5
15.5
© 2007 Hoffman Enclosures Inc.
Mounting Options
COMPACT® Pendant Arm Series 4
Rotation LImiter
Accessory for use with wall joint,
cable wall joint, and intermediate
joint. Limits the rotation of these
joints, which normally rotate 180
degrees. Rotation limiter provides
stops in 15-degree increments. The
limiter is a heavy-duty steel disk that
attaches to the pivot point on each
joint. Moveable stop pins provide
adjustment.
System
CCS56RL
50 and 60
CCS814RL
80 and 80/140
Catalog Number
System
CCS5STBLG
50
CCS6STBLG
60
CCS8STBLG
80
CS4
Øj
mm (in.)
96
(3.77)
119
(4.70)
Weight (lb)
0.8
1.3
Operator Interface
Enclosure Systems
Catalog Number
Bulletin
Swivel Tilt
Mounts between suspension arm
and operator interface enclosure to
provide both swivel and tilt options
for machine operator. Cast aluminum
assembly finished with RAL 7035
light gray polyester powder
paint. Center opening for control
cables. Tilt knob allows infinite tilt
adjustment from horizontal to 30
degrees. Swivel allows 300-degree
maximum rotation. Setscrews, seals,
and enclosure mounting screws are
included.
G each side
mm (in.)
50
(1.97)
60
(2.36)
80
(3.15)
Weight (lb)
7.0
7.0
7.0
Not recommended to be used in combination with base with cutout for sloped top PBSK66
or PBSK66SS.
NOTE: Maximum load for overhead
applications is 110 lb (50 kg).
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-101
Mounting Options
COMPACT® Pendant Arm Series 4
Bulletin
CS4
Angle Adapter Plate
Cast aluminum finished with RAL
7035 light gray polyester powder
paint. Provides connection between
enclosure and flange coupling.
Includes gasket and installation
hardware.
Catalog Number
System
Angle
CCS568AA15LG
50, 60, 80
15°
CCS568AA30LG
50, 60, 80
30°
D
mm (in.)
E
mm (in.)
F
mm (in.)
G
mm (in.)
H
mm (in.)
I
mm (in.)
J
mm (in.)
K
mm (in.)
148
(5.83)
148
(5.83)
127
(5.00)
127
(5.00)
60
(2.36)
60
(2.36
80
(3.15)
80
(3.15)
80
(3.15)
80
(3.15)
60
(2.36)
60
(2.36)
39
(1.54)
66
(2.66)
118
(4.65)
120
(4.72)
Weight (lb)
1.0
1.3
Base Bracket
For vertical tube mounting or
to mount tube to floor. Bracket
is cast iron finished with RAL
7035 light gray polyester powder
paint. Setscrews, gasket, and
seals are included. (Mounting
hardware not provided.)
Catalog
Number
System
CCS5BBLG
50
CCS6BBLG
60
CCS8BBLG
80
CCS14BBLG
80/140
OI-102
L each side
mm (in.)
H
mm (in.)
D
mm (in.)
E
mm (in.)
F
mm (in.)
G each side I
mm (in.)
mm (in.)
J
mm (in.)
ØM
mm (in.)
134
(5.28)
140
(5.51)
174
(6.85)
175 x 235
(6.89 x 9.25)
117
(4.60)
125
(4.92)
160
(6.30)
190
(7.48)
88
(3.48)
93
(3.67)
122
(4.80)
125
(4.92)
88
(3.48)
93
(3.67)
122
(4.80)
185
(7.28)
104
(4.09)
112
(4.41)
143
(5.63)
173
(6.81)
50
(1.97)
60
(2.36)
80
(3.15)
80 x 140
(3.15 x 5.51)
20
(0.79)
20
(0.79)
25
(0.98)
25
(0.98)
11
(0.43)
11
(0.43)
13
(0.51)
13
(0.51)
9
(0.35)
9
(0.35)
12
(0.47)
12
(0.47)
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
Weight (lb)
9.5
10.8
20.4
28.4
© 2007 Hoffman Enclosures Inc.
Mounting Options
COMPACT® Pendant Arm Series 4
Pedestal Base
Cast aluminum one-piece heavyduty construction finished with
RAL 7035 light gray polyester
powder paint. Includes all
hardware for attaching tubes.
Optional casters or levelers can
be installed on pedestal base.
Levelers and fixed or swivel
casters are available in pairs
(must order two pair).
Bulletin
CS4
Catalog
Number
System
D each side
(mm)
D each side
(in.)
Weight (lb)
CCS14PBLG
CCS6PBLG
CCS8PBLG
80/140
60
80
80 x 140
60 x 60
80 x 80
3.15 x 5.51
2.36 x 2.36
3.15 x 3.15
32.6
30.9
31.5
Operator Interface
Enclosure Systems
Casters and Levelers for Pedestal Base
Casters or levelers can be
installed under the cast
aluminum pedestal base. Casters
raise pedestal base 0.59 inches
(15mm). Four casters, four
levelers, or two casters and two
levelers can be installed.
Adapter Plate
Allows CCS6SJ set-up joint
and CCS6WF wall flange to be
fastened together. Finish is RAL
7035 light gray polyester powder
paint.
Catalog Number
Description
Weight (lb)
CCSPBLF
CCSPBWF
CCSPBWS
(2) Levelers
(2) Fixed Casters
(2) Swivel Casters
0.3
0.3
0.5
Catalog Number
Description
CCS6ADP
CCS6SJ to CS6WF Adapter Plate
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-103
COMPACT® Pendant Arm Series 4
Configurations
Mounting Options
Bulletin
CS4
A
Catalog Number
Description
Qty
(System 50)
(System 60)
(System 80)
(System 80/140)
Set-up joint
1
ccs5sjlg
ccs6sjlg
ccs8sjlg
ccs14sjlg
Elbow
1
ccs5ellg
ccs6ellg
ccs8ellg
ccs14ellg
Flange coupling or
Swivel tilt
1
1
ccs5fclg
ccs5stblg
ccs6fclg
ccs6stblg
ccs8fclg
ccs8stblg
ccs14fclg
—
Description
Qty
(System 50)
(System 60)
(System 80)
(System 80/140)
Wall joint or
Cable wall joint
1
1
ccs5wjrlg
ccs5wjcrlg
ccs6wjrlg
ccs6wjcrlg
ccs8wjrlg
ccs8wjcrlg
ccs14wjrlg
—
Elbow
1
ccs5ellg
ccs6ellg
ccs8ellg
ccs14ellg
Flange coupling or
Swivel tilt
1
1
ccs5fclg
ccs5stblg
ccs6fclg
ccs6stblg
ccs8fclg
ccs8stblg
ccs14fclg
—
Description
Qty
(System 50)
(System 60)
(System 80)
(System 80/140)
Wall joint or
Cable wall joint
1
1
ccs5wjrlg
ccs5wjcrlg
ccs6wjrlg
ccs6wjcrlg
ccs8wjrlg
ccs8wjcrlg
ccs14wjrlg
—
Elbow
1
ccs5ellg
ccs6ellg
ccs8ellg
ccs14ellg
Flange coupling
1
ccs5fclg
ccs6fclg
ccs8fclg
ccs14fclg
Angle adapter 15º or
Angle adapter 30º
1
1
ccs568aa15lg
ccs568aa30lg
ccs568aa15lg
ccs568aa30lg
ccs568aa15lg
ccs568aa30lg
ccs14aa15lg
—
Description
Qty
(System 50)
(System 60)
(System 80)
(System 80/140)
Wall flange
1
ccs5wflg
ccs6wflg
ccs8wflg
ccs14wflg
Elbow
1
ccs5ellg
ccs6ellg
ccs8ellg
ccs14ellg
Flange coupling or
Swivel tilt
1
1
ccs5fclg
ccs5stblg
ccs6fclg
ccs6stblg
ccs8fclg
ccs8stblg
ccs14fclg
—
B and C
Catalog Number
D
Catalog Number
E and F
Catalog Number
OI-104
Subject to change without notice
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
COMPACT® Pendant Arm Series 4
Configurations
Mounting Options
Bulletin
CS4
G
Catalog Number
Description
Qty
(System 50)
(System 60)
(System 80)
(System 80/140)
Set-up joint
1
ccs5sjlg
ccs6sjlg
ccs8sjlg
ccs14sjlg
Flange elbow coupling
1
ccs5feclg
ccs6feclg
ccs8feclg
ccs14feclg
Catalog Number
Description
Qty
(System 50)
(System 60)
(System 80)
(System 80/140)
Wall joint or
Cable wall joint
1
1
ccs5wjrlg
ccs5wjcrlg
ccs6wjrlg
ccs6wjcrlg
ccs8wjrlg
ccs8wjcrlg
ccs14wjrlg
—
Flange elbow coupling
1
ccs5feclg
ccs6feclg
ccs8feclg
ccs14feclg
Description
Qty
(System 50)
(System 60)
(System 80)
(System 80/140)
Wall joint or
Cable wall joint
1
1
ccs5wjrlg
ccs5wjcrlg
ccs6wjrlg
ccs6wjcrlg
ccs8wjrlg
ccs8wjcrlg
ccs14wjrlg
—
Flange elbow coupling
1
ccs5fclg
ccs6fclg
ccs8fclg
ccs14fclg
Angle adapter 15º or
Angle adapter 30º
1
1
ccs568aa15lg
ccs568aa30lg
ccs568aa15lg
ccs568aa30lg
ccs568aa15lg
ccs568aa30lg
ccs14aa15lg
—
Description
Qty
(System 50)
(System 60)
(System 80)
(System 80/140)
Wall joint or
Cable wall joint
1
1
ccs5wjrlg
ccs5wjcrlg
ccs6wjrlg
ccs6wjcrlg
ccs8wjrlg
ccs8wjcrlg
—
K
Catalog Number
L
Catalog Number
a
Elbow
1
ccs5ellg
ccs6ellg
ccs8ellg
—
Swivel tilt a
1
ccs5stblg
ccs6stblg
ccs8stblg
—
Maximum load for overhead applications is 110 lbs. (50kg) including enclosure.
Note to the Specifier:
1. Select pendant system sizing using the COMPACT Series 4 load capacity chart.
2. Tube catalog numbers are not included in configuration tables.
Subject to change without notice
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-105
Operator Interface
Enclosure Systems
H and I
COMPACT® Pendant Arm Series 4
Configurations
Mounting Options
Bulletin
CS4
M
Catalog Number
Description
Qty
(System 50)
(System 60)
(System 80)
(System 80/140)
Set-up joint
1
ccs5sjlg
ccs6sjlg
ccs8sjlg
ccs14sjlg
Intermediate joint
1
ccs5ijrlg
ccs6ijrlg
ccs8ijrlg
ccs14ijrlg
Elbow
1
ccs5ellg
ccs6ellg
ccs8ellg
ccs14ellg
Flange coupling or
Swivel tilt
1
1
ccs5fclg
ccs5stblg
ccs6fclg
ccs6stblg
ccs8fclg
ccs8stblg
ccs14fclg
—
Description
Qty
(System 50)
(System 60)
(System 80)
(System 80/140)
Wall joint or
Cable wall joint
1
1
ccs5wjrlg
ccs5wjcrlg
ccs6wjrlg
ccs6wjcrlg
ccs8wjrlg
ccs8wjcrlg
ccs14wjrlg
—
Intermediate joint
1
ccs5ijrlg
ccs6ijrlg
ccs8ijrlg
ccs14ijrlg
Elbow
1
ccs5ellg
ccs6ellg
ccs8ellg
ccs14ellg
Flange coupling or
Swivel tilta
1
1
ccs5fclg
ccs5stblg
ccs6fclg
ccs6stblg
ccs8fclg
ccs8stblg
ccs14fclg
—
N and O
Catalog Number
a
Maximum load for overhead applications is 110 lbs. (50kg) including enclosure.
P
Catalog Number
Description
Qty
(System 50)
(System 60)
(System 80)
(System 80/140)
Wall joint or
Cable wall joint
1
1
ccs5wjrlg
ccs5wjcrlg
ccs6wjrlg
ccs6wjcrlg
ccs8wjrlg
ccs8wjcrlg
ccs14wjrlg
—
Intermediate joint
1
ccs5ijrlg
ccs6ijrlg
ccs8ijrlg
ccs14ijrlg
Elbow
1
ccs5ellg
ccs6ellg
ccs8ellg
ccs14ellg
Flange coupling
1
ccs5fclg
ccs6fclg
ccs8fclg
ccs14fclg
Angle adapter 15º or
Angle adapter 30º
1
1
ccs568aa15lg
ccs568aa30lg
ccs568aa15lg
ccs568aa30lg
ccs568aa15lg
ccs568aa30lg
ccs14aa15lg
—
Description
Qty
(System 50)
(System 60)
(System 80)
(System 80/140)
Wall flange
1
ccs5wflg
ccs6wflg
ccs8wflg
ccs14wflg
Elbow
1
ccs5ellg
ccs6ellg
ccs8ellg
ccs14ellg
Flange coupling
1
ccs5fclg
ccs6fclg
ccs8fclg
ccs14fclg
Angle adapter 15º or
Angle adapter 30º
1
1
ccs568aa15lg
ccs568aa30lg
ccs568aa15lg
ccs568aa30lg
ccs568aa15lg
ccs568aa30lg
ccs14aa15lg
—
R
Catalog Number
OI-106
Subject to change without notice
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
COMPACT® Pendant Arm Series 4
Configurations
Mounting Options
Bulletin
CS4
S
Catalog Number
Description
Qty
(System 50)
(System 60)
(System 80)
(System 80/140)
Base bracket
1
ccs5bblg
ccs6bblg
ccs8bblg
ccs14bblg
Flange coupling
1
ccs5fclg
ccs6fclg
ccs8fclg
ccs14fclg
Angle adapter 15º or
Angle adapter 30º
1
1
ccs568aa15lg
ccs568aa30lg
ccs568aa15lg
ccs568aa30lg
ccs568aa15lg
ccs568aa30lg
ccs14aa15lg
—
Catalog Number
Description
Qty
(System 50)
(System 60)
(System 80)
(System 80/140)
Set-up joint
1
ccs5sjlg
ccs6sjlg
ccs8sjlg
ccs14sjlg
Intermediate joint
1
ccs5ijrlg
ccs6ijrlg
ccs8ijrlg
ccs14ijrlg
Flange elbow coupling
1
ccs5feclg
ccs6feclg
ccs8feclg
ccs14feclg
Description
Qty
(System 50)
(System 60)
(System 80)
(System 80/140)
Wall joint or
Cable wall joint
1
1
ccs5wjrlg
ccs5wjcrlg
ccs6wjrlg
ccs6wjcrlg
ccs8wjrlg
ccs8wjcrlg
ccs14wjrlg
—
Intermediate joint
1
ccs5ijrlg
ccs6ijrlg
ccs8ijrlg
ccs14ijrlg
Flange elbow coupling
1
ccs5fclg
ccs6fclg
ccs8fclg
ccs14fclg
Description
Qty
(System 50)
(System 60)
(System 80)
(System 80/140)
Wall joint or
Cable wall joint
1
1
ccs5wjrlg
ccs5wjcrlg
ccs6wjrlg
ccs6wjcrlg
ccs8wjrlg
ccs8wjcrlg
ccs14wjrlg
—
Intermediate joint
1
ccs5ijrlg
ccs6ijrlg
ccs8ijrlg
ccs14ijrlg
Flange elbow coupling
1
ccs5fclg
ccs6fclg
ccs8fclg
ccs14fclg
Angle adapter 15º or
Angle adapter 30º
1
1
ccs568aa15lg
ccs568aa30lg
ccs568aa15lg
ccs568aa30lg
ccs568aa15lg
ccs568aa30lg
ccs14aa15lg
—
U and V
Catalog Number
W
Catalog Number
Note to the Specifier:
1. Select pendant system sizing using the COMPACT Series 4 load capacity chart.
2. Tube catalog numbers are not included in configuration tables.
Subject to change without notice
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-107
Operator Interface
Enclosure Systems
T
Mounting Options
Stainless Steel Operator Interface
Enclosures and Pendant Arms
Rev. B 12/07
Bulletin
CCR6, CCR6Y
Construction
•
•
•
•
•
•
•
Enclosure constructed of 1.5 mm Type 304 stainless steel
Front door constructed of 1.5 mm Type 304 stainless steel
Gaskets are polyurethane foam
Front door hinged on side
Foamed gaskets
Facilities for installing mounting plates
Stainless steel safety latch mounted at side, away from protected
space
Industry Standards
UL 508A, File No. E61997: Type 4, 4X, 12
cUL CSA C22.2 No. 94, File No. E61997: Type 4, 4X, 12
IEC 60529, IP66
Application
These stainless steel front-door control enclosures are particularly
well-suited for suspending process and control equipment in the food
and pharmaceutical industries, where ease of cleaning and corrosion
resistance are particularly important.
Designed for use with the CS480 and CS600 stainless steel pendant
arm systems.
Catalog Number
Pendant Cutout
Weight (lb)
Weight (kg)
CCC48S302513
CCC48S303513
CCC48S354016
CCC48S404016
CCC48S405021
CCC48S455521
CCC48S505521
CCC48S605521
CCC60S354016
CCC60S404016
CCC60S405021
CCC60S455521
CCC60S505521
CCC60S605521
CCC60S605530
CS480
CS480
CS480
CS480
CS480
CS480
CS480
CS480
CS600
CS600
CS600
CS600
CS600
CS600
CS600
14
14
16
20
26
28
30
32
16
20
26
28
30
32
36
6.4
6.4
7.3
9.1
11.8
12.7
13.6
14.5
7.3
9.1
11.8
12.7
13.6
14.5
16.3
Standard Sizes CS480/CS600 Stainless Steel Operator Interface Enclosures
Catalog Number
CCC48S302513
CCC48S303513
CCC48S354016
CCC60S354016
CCC48S404016
CCC60S404016
CCC48S405021
CCC60S405021
CCC48S455521
CCC60S455521
CCC48S505521
CCC60S505521
CCC48S605521
CCC60S605521
CCC60S605530
OI-108
AxBxC
mm (in.)
Use with Pendant
Arm System
D
mm (in.)
W
mm (in.)
F
mm (in.)
Door Clear Space
MxN
mm (in.)
300 x 250 x 130
(11.81 x 9.84 x 5.12)
300 x 350 x 130
(11.81 x 13.78 x 5.12)
350 x 400 x 160
(13.78 x 15.75 x 6.30)
350 x 400 x 160
(13.78 x 15.75 x 6.30)
400 x 400 x 160
(15.75 x 15.75 x 6.30)
400 x 400 x 160
(15.75 x 15.75 x 6.30)
400 x 500 x 210
(15.75 x 19.69 x 8.27)
400 x 500 x 210
(15.75 x 19.69 x 8.27)
450 x 500 x 210
(17.72 x 19.69 x 8.27)
450 x 500 x 210
(17.72 x 19.69 x 8.27)
500 x 550 x 210
(19.69 x 21.65 x 8.27)
500 x 550 x 210
(19.69 x 21.65 x 8.27)
600 x 550 x 210
(23.62 x 21.65 x 8.27)
600 x 550 x 210
(23.62 x 21.65 x 8.27)
600 x 550 x 300
(23.62 x 21.65 x 11.81)
CS480
240
(9.45)
240
(9.45)
290
(11.42)
290
(11.42)
340
(13.39)
340
(13.39)
340
(13.39)
340
(13.39)
390
(15.35)
390
(15.35)
440
(17.32)
440
(17.32)
540
(21.26)
540
(21.26)
540
(21.26)
177
(6.96)
277
(10.86)
327
(12.86)
327
(12.86)
327
(12.86)
327
(12.86)
427
(16.80)
427
(16.80)
477
(18.77)
477
(18.77)
477
(18.77)
477
(18.77)
477
(18.77)
477
(18.77)
477
(18.77)
125
(4.90)
125
(4.90)
155
(6.08)
155
(6.08)
155
(6.08)
155
(6.08)
205
(8.05)
205
(8.05)
205
(8.05)
205
(8.05)
205
(8.05)
205
(8.05)
205
(8.05)
205
(8.05)
295
(11.60)
220 x 140
(8.66 x 5.51)
220 x 240
(8.66 x 9.45)
270 x 290
(10.63 x 11.42)
270 x 290
(10.63 x 11.42)
320 x 290
(12.59 x 11.42)
320 x 290
(12.59 x 11.42)
320 x 390
(12.59 x 15.35)
320 x 390
(12.59 x 15.35)
370 x 440
(14.57 x 17.32)
370 x 440
(14.57 x 17.32)
420 x 440
(16.54 x 17.32)
420 x 440
(16.54 x 17.32)
520 x 440
(20.47 x 17.32)
520 x 440
(20.47 x 17.32)
520 x 440
(20.47 x 17.32)
CS480
CS480
CS600
CS480
CS600
CS480
CS600
CS480
CS600
CS480
CS600
CS480
CS600
CS600
Subject to change without notice
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
Mounting Plate
Catalog Number
CCCP3025
CCCP3035
CCCP3540
CCCP3540
CCCP4040
CCCP4040
CCCP4050
CCCP4050
CCCP4555
CCCP4555
CCCP5055
CCCP5055
CCCP6055
CCCP6055
CCCP6055
© 2007 Hoffman Enclosures Inc.
Stainless Steel Operator Interface
Enclosures and Pendant Arms
Mounting Options
Bulletin
CCR6, CCR6Y
Operator Interface
Enclosure Systems
Keyboard Shelf
Shelf is for 350mm and wider
enclosures; in stainless steel. 10°
slope. Mounting hardware included.
Enclosure machining required.
Mounting Plate
Plate is for mounting equipment on
the rear panel. Made of 3mm plated
steel. Mounted using pins on the
rear panel.
Handles
Handles are in stainless steel for
mounting on enclosure sides.
Mounting hardware included.
Enclosure machining required.
Subject to change without notice
Catalog Number
Description
Weight (lb)
CCSSKBT
Keyboard shelf
4.9
Catalog
Number
Height (mm) Height (in.) Width (mm) Width (in.)
Weight (lb)
CCCP3025
CCCP3035
CCCP3540
CCCP4040
CCCP4050
CCCP4555
CCCP5055
CCCP6055
230
230
280
330
330
380
430
530
2.0
2.0
3.0
3.0
4.0
5.0
6.0
7.0
9.06
9.06
11.02
12.99
12.99
14.96
16.93
20.87
170
270
320
320
420
18.50
470
470
6.69
10.63
12.60
12.60
16.54
18.50
18.50
18.50
Catalog Number
Description
Weight (lb)
CCSSHDL
Handles for CC480/600 enclosures
5.0
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-109
Mounting Options
CS480 Stainless Steel
Pendant Arm System
Bulletin
CCR6
Fitting with Cover Removed
Application
The CS480 Stainless Steel Pendant Arm System is particularly well
suited for suspending process and control equipment in the food
and pharmaceutical industries, where ease of cleaning and corrosion
resistance are particularly important.
Swivel brackets allow the equipment to swing out for use and to
move out of the way when not needed.
A variety of preformed straight and angled tubing and fittings is
available to meet the requirements of many different applications.
Brackets are available for wall or machine and floor mounting.
The wide variety of comonents permits a high level of flexibility in
configuring the system. See the System Combinations Drawings for
some possible combinations.
This system is rated for loads as shown in the Load Capacity chart.
For heavier equipment, see the CS600 section.
• 90-degree fittings have a removable cover that allows easy access
for wiring
• The coupling hole geometry for enclosure machining are shown in
the Coupling Hole Geometry diagram
Materials and Finish
Tubing: Type 304 polished stainless steel
Fittings: Type 304 polished stainless steel
NOTE: Brushed stainless steel shown.
Industry Standards
IEC 60529, IP66
Construction
• Tubing clamps into position with setscrews for easy assembly and
smooth appearance
• Load capacity 400 N (89.6 lb) at 1m (39.37 in.). See Load Capacity
chart for details.
• Fixed or swivel mounting, straight or at a 15-degree angle
OI-110
Subject to change without notice
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
CS480 Stainless Steel
Pendant Arm System
Mounting Options
Bulletin
CCR6
Load Diagram
System Load Capacity
The load capacity of the CS480 pendant arm system is shown in the
chart and diagram. Choose the CS600 system for larger loads.
Operator Interface
Enclosure Systems
Subject to change without notice
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-111
CS480 Stainless Steel
Pendant Arm System
System Combinations
The wide variety of components permits a high level of flexibility
in configuring the system. Some possible combinations are shown
below.
OI-112
Subject to change without notice
Mounting Options
Bulletin
CCR6
Coupling Hole Geometry for Enclosure Machining
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Mounting Options
CS480 Stainless Steel
Pendant Arm System
Straight Tubing
Straight tubing has an outer diameter
of 48.3mm (1.90 in.) and is made
from 3.6mm wall thickness Type 304
polished stainless steel.
Bulletin
CCR6
L (mm)
L (in.)
Weight (kg)
Weight (lb)
CCSS48T25
CCSS48T50
CCSS48T75
CCSS48T100
CCSS48T125
CCSS48T150
250
500
750
1000
1250
1500
9.84
19.69
29.53
39.37
49.21
59.06
1.13
2.13
3.18
4.40
5.44
6.67
2.5
4.7
7.0
9.7
12.0
14.7
Catalog
Number
L (mm)
L (in.)
Weight (kg)
Weight (lb)
CCSS48TLB25
CCSS48TLB50
250 x 250
500 x 500
9.84 x 9.84
19.69 x 19.69
2.4
4.76
5.3
10.5
Operator Interface
Enclosure Systems
Catalog
Number
L-Shaped Tubing
L-shaped tubing has an outer
diameter of 48.3mm (1.90 in.) and
is made from 3.6mm-thick Type 304
polished stainless steel. It is used
with coupling sleeves and straight
tubing to provide the desired system
configuration.
Subject to change without notice
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-113
Mounting Options
CS480 Stainless Steel
Pendant Arm System
L-Shaped Stainless Steel Pendant Tubes
L-shaped pendant tubes are made
of Type 304 stainless steel with an
outer diameter of 48mm (1.90 in.)
and have a smooth finish. For use in
conjunction with CS480 stainless
steel pendant fittings. Use of these
tubes does not compromise the
enclosure rating.
Catalog
Number
A (mm)
A (in.)
B (mm)
B (in.)
Wt. (kg)
Wt. (lb)
CCSSTL5024
CCSSTL10050
500
1000
19.69
39.37
240
500
9.45
19.69
2.6
5.4
5.7
11.9
U-Shaped Stainless Steel Pendant Tubes
U-shaped pendant tubes are made
of Type 304 stainless steel with an
outer diameter of 48mm (1.90 in.)
and have a smooth finish. For use in
conjunction with CS480 stainless
steel pendant fittings. Use of these
tubes does not compromise the
enclosure rating.
OI-114
Subject to change without notice
Bulletin
CCR6
Catalog Number
CCSSTU502450
CCSSTU802480
AxBxC
mm (in.)
Weight (kg)
500 x 240 x 500
4.5
(19.69 x 9.45 x 19.69)
1000 x 500 x 800
6.7
(39.37 x 19.69 x 31.50)
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
Weight (lb)
9.9
14.8
© 2007 Hoffman Enclosures Inc.
Mounting Options
CS480 Stainless Steel
Pendant Arm System
Coupling Sleeve
The coupling sleeve joins sections
of tubing in the CS480 system. Type
304 polished stainless steel finish.
Includes gaskets.
Flange coupling for attaching
enclosures. Turns through 340º
with rotation limiter. Preset torque.
Maintenance-free bearings. Type
304 polished stainless steel finish.
Includes gaskets and mounting
hardware.
Catalog Number
Description
Weight (kg)
Weight (lb)
ccss48cs
CS480 system
coupling sleeve
1.4
3.5
Catalog Number
Description
Weight (kg)
Weight (lb)
CCSS48FC
Straight coupling for
enclosure
1.4
3.5
Angle Coupling
Rigid flange coupling with 15º
angle of inclination for attaching
enclosures. Type 304 polished
stainless steel finish. Includes gaskets
and mounting hardware.
Catalog Number
Description
Weight (kg)
Weight (lb)
CCSS48AC15
Angle coupling for
enclosures
1.0
2.0
Subject to change without notice
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-115
Operator Interface
Enclosure Systems
Straight Coupling
Bulletin
CCR6
CS480 Stainless Steel
Pendant Arm System
Mounting Options
Bulletin
CCR6
Swivel Base for External Attachment
Swivel base for mounting to
machine or floor. Turns through
340º with rotation limiter.
Preset torque. Maintenancefree bearings. Type 304 polished
stainless steel finish. Includes
gaskets. Base-mounting fasteners
not provided.
Catalog Number
Description
CCSS48BBRE
Swivel base, external 4.2
Weight (kg)
Weight (lb)
9.5
Swivel Base for Internal Mounting
Swivel base for mounting to machine
or floor. Turns through 340º with
rotation limiter. Preset torque.
Maintenance-free bearings. Type
304 polished stainless steel finish.
Includes gaskets. Base-mounting
fasteners not provided.
Catalog Number
Description
CCSS48BBRI
Swivel base, internal 4.2
OI-116
Weight (kg)
Subject to change without notice
Weight (lb)
9.5
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
CS480 Stainless Steel
Pendant Arm System
Mounting Options
Bulletin
CCR6
Base Bracket/Wall Flange
Use as base bracket or wall flange
to mount to vertical or horizontal
surfaces. Type 304 polished stainless
steel finish. Includes gaskets. Basemounting fasteners not provided.
Description
Weight (kg)
Weight (lb)
CCSS48BB
Base bracket/wall
flange
1.4
3.5
Operator Interface
Enclosure Systems
Catalog Number
Base Bracket Angle Coupling
Rigid 15º coupling for direct
mounting of enclosures to horizontal
and vertical surfaces. Type 304
polished stainless steel finish.
Includes gaskets and enclosure
mounting hardware. Bsae-mounting
fasteners not provided.
Catalog Number
Description
Weight (kg)
Weight (lb)
CCSS48ACBB
Base bracket angle
coupling
1.9
4.5
Subject to change without notice
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-117
CS480 Stainless Steel
Pendant Arm System
Mounting Options
Bulletin
CCR6
Swivel Base External Bracket Coupling
Swivel base external bracket
coupling for mounting enclosures
directly to a machine or the floor.
Turns through 340 degrees with
rotation limiter. Preset torque.
Maintenance-free bearings. Type
304 polished stainless steel finish.
Includes gaskets and enclosure
mounting hardware. Base-mounting
fasteners not provided.
Catalog Number
Description
CCSS48BBCRE
Swivel base external 4.5
bracket coupling
Weight (kg)
Weight (lb)
9.92
Swivel Base Internal Bracket Coupling
Swivel base internal bracket coupling
for directly mounting enclosures to a
machine or the floor. Turns through
340 degrees with rotation limiter.
Preset torque. Maintenance-free
bearings. Type 304 polished stainless
steel finish. Includes gaskets and
enclosure mounting hardware. Basemounting fasteners not provided
Catalog Number
Description
Weight (kg)
Weight (lb)
CCSS48BBCRI
Swivel base internal
bracket coupling
4.1
9.03
OI-118
Subject to change without notice
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
CS480 Stainless Steel
Pendant Arm System
Mounting Options
Bulletin
CCR6
Wall Joint
Wall joint with vertical socket for
mounting to vertical surfaces. Cover
to facilitate wiring. Turns through
340º with rotation limiter. Preset
torque. Maintenance-free bearings.
Type 304 polished stainless steel
finish. Includes gaskets. Wallmounting fasteners not provided.
Description
Weight (kg)
Weight (lb)
CCSS48WJV
Wall joint, verticle
mount
7.3
16.09
Operator Interface
Enclosure Systems
Catalog Number
Wall Coupling
Swivel wall coupling for direct
mounting of enclosure to vertical
machine surfaces. Turns through
340º with rotation limiter. Cover
to facilitate wiring. Preset torque.
Maintenance-free bearings. Type
304 polished stainless steel finish.
Includes gaskets and enclosure
mounting hardware. Wall-mounting
fasteners not provided.
Catalog Number
Description
CCSS48WJC
Wall coupling, vertical 7.3
mount
Weight (kg)
Weight (lb)
16.09
Wall Bracket
Wall bracket with vertical socket
for attachment to vertical surfaces.
Cover to facilitate wiring. Type
304 polished stainless steel finish.
Includes gaskets. Wall-mounting
fasteners not included.
Catalog Number
Description
Weight (kg)
Weight (lb)
CCSS48WJRV
Wall bracket
7.7
16.25
Subject to change without notice
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-119
Mounting Options
CS600 Stainless Steel
Pendant Arm System
Rev. A 5/07
Bulletin
CCR6
Fitting with Cover Removed
Application
The CS600 Stainless Steel Pendant Arm System is particularly well
suited for suspending process and control equipment in the food
and pharmaceutical industries, where ease of cleaning and corrosion
resistance are particularly important.
Swivel brackets allow the equipment to swing out for use and to
move out of the way when not needed.
Preformed straight tubing and a variety of fittings are available to
meet the requirements of many different applications. Brackets are
available for wall or machine and floor mounting.
Different fittings offer different amounts of space for cables and
leads. See the Cable Entry Space Dimension Drawing, which shows
the dimensions at the narrowest point inside each fitting.
The wide variety of components permits a high level of flexibility in
configuring the system. See the System Combinations Application
Drawing for some possible combinations.
This system is rated for loads shown in the Load Diagram. See the
CS480 section for smaller loads.
Construction
• Tubing clamps into position for easy assembly and smooth
appearance
• No external screws to trap dirt.
• Load capacity 600 N (134.89 lbf) at 1m (39.37 in.). See Load
Capacity chart for details.
• Fixed or swivel mounting, straight or at a 15-degree angle
• 90-degree fittings have a removable cover that allows easy access
for wiring
• Anti-vibration capability
Finish
Tubing: Type 304 Stainless Steel
Fittings: Type 304 Stainless Steel
Industry Standards
IEC 60529, IP66
OI-120
Subject to change without notice
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
CS600 Stainless Steel
Pendant Arm System
Load Capacity
The load capacity of the CS600 pendant arm system is shown in the
chart and diagram. Choose the CS480 system for larger loads.
Mounting Options
Bulletin
CCR6
Load Diagram
Operator Interface
Enclosure Systems
Subject to change without notice
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-121
CS600 Stainless Steel
Pendant Arm System
Mounting Options
Bulletin
CCR6
System Combinations
Coupling Hole Geometry for Enclosure Machining
The wide variety of components permits a high level of flexibility
in configuring the system. Some possible combinations are shown
below.
The coupling hole geometries for enclosure machining are shown in
the Coupling Hole diagram.
OI-122
Subject to change without notice
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
CS600 Stainless Steel
Pendant Arm System
Mounting Options
Bulletin
CCR6
Cable Entry Space
Different fittings offer different amounts of space for cables and
leads. These diagrams show the dimensions at the narrowest point
inside each fitting.
Operator Interface
Enclosure Systems
Subject to change without notice
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-123
CS600 Stainless Steel
Pendant Arm System
Mounting Options
Bulletin
CCR6
Tubing
Tubes have 60.3mm (2.37 in.) outer
diameter and are made from 3.6mm
wall thickness stainless steel.
Catalog Number
L (mm)
L (in.)
Weight (kg)
Weight (lb)
CCSST25
CCSST50
CCSST75
CCSST100
CCSST125
CCSST150
250
500
750
1000
1250
1500
9.84
19.69
29.53
39.37
49.21
59.06
1.18
2.36
3.40
4.63
5.85
15.3
2.6
5.2
7.5
10.2
12.9
6.94
Coupling
Flange coupling for mounting
enclosures. Turns through 300
degrees with rotation limiter. Preset
torque. Maintenance-free bearings.
Includes gaskets and mounting
hardware.
Catalog Number
Description
Weight (kg)
Weight (lb)
CCSSfc
Stainless Steel
2.18
4.8
OI-124
Subject to change without notice
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
CS600 Stainless Steel
Pendant Arm System
Mounting Options
Bulletin
CCR6
Elbow Coupling
Flange elbow coupling for attaching
enclosures. Assembly aperture
cover conceals screws for easier
cleaning. Turns through 300 degrees
with rotation limiter. Preset torque.
Maintenance-free bearings. Includes
gaskets and mounting hardware.
Description
Weight (kg)
Weight (lb)
CCSSEC
Stainless Steel
6.49
14.3
Operator Interface
Enclosure Systems
Catalog Number
Elbow
Elbow for connecting two tubes at
90 degrees. Includes screw cover
and gaskets.
Catalog Number
Description
Weight (kg)
Weight (lb)
CCSSE
Stainless Steel
4.45
9.8
Subject to change without notice
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-125
CS600 Stainless Steel
Pendant Arm System
Mounting Options
Bulletin
CCR6
Swivel Base
Swivel base for mounting to machine
or floor. Turns through 300 degrees
with rotation limiter. Preset torque.
Maintenance-free bearings. Includes
gaskets. Wall-mounting fasteners not
provided.
Catalog Number
Description
Weight (kg)
Weight (lb)
CCSSBBT
Stainless Steel
5.72
12.6
Wall Flange/Base Bracket
Wall flange or base bracket for
mounting to horizontal and vertical
surfaces. Includes gaskets. Wall
mounting fasteners not provided.
Catalog Number
Description
Weight (kg)
Weight (lb)
CCSSWFB
Stainless Steel
3.67
8.1
OI-126
Subject to change without notice
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Mounting Options
CS600 Stainless Steel
Pendant Arm System
Bulletin
CCR6
Top-Mounted Joint
Top-mounted joint for mounting
to horizontal surfaces. Assembly
aperture cover conceals screws for
easier cleaning. Turns through 300
degrees with rotation limiter. Preset
torque. Maintenance-free bearings.
Includes gaskets. Wall-mounting
fasteners not provided.
Description
Weight (kg)
Weight (lb)
CCSSSJ
Stainless steel
13.65
30.1
Wall Joint
Wall joint for mounting to vertical
surfaces. Assembly aperture cover
conceals screws for easier cleaning.
Turns through 300 degrees with
rotation limiter. Preset torque.
Maintenance-free bearings. Includes
gaskets. Wall-mounting fasteners not
provided.
Subject to change without notice
Operator Interface
Enclosure Systems
Catalog Number
Catalog Number
Description
Weight (kg)
Weight (lb)
CCSSWJ
Stainless steel
16.01
35.3
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-127
Consolets and Pushbutton
Enclosures
Consolets
Bulletin
C5, P1
• Oil-resistant gasket and adhesive
• Control panel attached with continuous hinge along bottom edge
Finish
ANSI 61 gray polyester powder paint inside and out over
phosphatized surfaces.
Industry Standards
UL 508A, File Number E61997: Type 12, 13
NEMA/EEMAC Type 12, 13
CSA File Number 42186: Type 12
IEC 60529, IP65
Accessories
See Accessories chapter.
Application
Designed to house a variety of electronic control or instrumentation
devices, consolets provide protection from dust, dirt, oil, and water.
Flexible design allows for mounting on either of two sides, creating
control surfaces of 30 degrees or 60 degrees. Consolets can be
mounted on desktops, pedestals, or other flat surfaces.
NOTE: See Corrosion-Resistant Enclosures for information on related stainless
steel products.
Corrosion Inhibitors
Latch Kits
Mounting Bracket Kit
Pedestals
Touch-Up Paint (ATPPY61)
Window Kit
Standard Sizes Columns and Bases
Construction
• 14 gauge steel
• Seams continuously welded and ground smooth; no holes or
knockouts
• Captivated cover screws thread into sealed wells
• Bonding provision on cover
Catalog Number
Size
Description
A44CCOL
4.00 x 4.00
(102 x 102)
6.00 x 6.00
(152 x 152)
18.00 x 18.00
(457 x 457)
24.00 x 24.00
(610 x 610)
Straight Pedestal Column
A66CCOL
A18SBASE
A24SBASE
Standard Sizes Consolets
Catalog
Number
C8C8
C8C12
C8C16
C8C20
C12C12
C12C16
C12C20
C12C24
C16C16
C16C20
C16C24
C16C30
C16C36
C20C20
C20C24
C20C30
OI-128
AxBxC
in. (mm)
8.00 x 8.00 x 7.09
(203 x 203 x 180)
8.00 x 12.00 x 7.09
(203 x 305 x 180)
8.00 x 16.00 x 7.09
(203 x 406 x 180)
8.00 x 20.00 x 7.09
(203 x 508 x 180)
12.00 x 12.00 x 9.09
(305 x 305 x 231)
12.00 x 16.00 x 9.09
(305 x 406 x 231)
12.00 x 20.00 x 9.09
(305 x 508 x 231)
12.00 x 24.00 x 9.09
(305 x 610 x 231)
16.00 x 16.00 x 11.09
(406 x 406 x 282)
16.00 x 20.00 x 11.09
(406 x 508 x 282)
16.00 x 24.00 x 11.09
(406 x 610 x 282)
16.00 x 30.00 x 11.09
(406 x 762 x 282)
16.00 x 36.00 x 11.09
(406 x 914 x 282)
20.00 x 20.00 x 13.09
(508 x 508 x 332)
20.00 x 24.00 x 13.09
(508 x 610 x 332)
20.00 x 30.00 x 13.09
(508 x 762 x 332)
Straight Pedestal Column
Pedestal Base
Pedestal Base
E (in.)
E (mm)
H (in.)
H (mm)
J (in.)
J (mm)
K (in.)
K (mm)
L (in.)
L (mm)
N (in.)
N (mm)
5.62
143
8.28
210
8.28
210
7.50
191
6.62
168
7.44
189
5.62
143
8.28
210
12.28
312
11.50
292
6.62
168
7.44
189
5.62
143
8.28
210
16.28
414
15.50
394
6.62
168
7.44
189
5.62
143
8.28
210
20.28
515
19.50
495
6.62
168
7.44
189
7.62
194
12.28
312
12.28
312
11.50
292
10.62
270
10.91
277
7.62
194
12.28
312
16.28
414
15.50
394
10.62
270
10.91
277
7.62
194
12.28
312
20.28
515
19.50
495
10.62
270
10.91
277
7.62
194
12.28
312
24.28
617
23.50
597
10.62
270
10.91
277
9.62
244
16.28
414
16.28
414
15.50
394
14.62
371
14.38
365
9.62
244
16.28
414
20.28
515
19.50
495
14.62
371
14.38
365
9.62
244
16.28
414
24.28
617
23.50
597
14.62
371
14.38
365
9.62
244
16.28
414
30.28
769
29.50
749
14.62
371
14.38
365
9.62
244
16.28
414
36.28
922
35.50
902
14.62
371
14.38
365
11.62
295
20.28
515
20.28
515
18.62
473
18.62
473
17.84
453
11.62
295
20.28
515
24.28
617
22.62
575
18.62
473
17.84
453
11.62
295
20.28
515
30.28
769
28.62
727
18.62
473
17.84
453
Subject to change without notice
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Consolets
Consolets and Pushbutton
Enclosures
Bulletin
C5, P1
Operator Interface
Enclosure Systems
Subject to change without notice
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-129
Consolets and Pushbutton
Enclosures
Sloping Front 30.5mm and 22.5mm
Pushbutton Enclosures
Bulletin
PB1
• 4-way pushbutton holes accept all brands of oiltight pushbuttons,
switches, and pilot lights
• Enclosures 7.25 x 6.25 x 6.75 in. (184 x 159 x 171mm) and larger
have internal detachable hinge to hold cover open during wiring,
yet permit immediate removal
• Larger enclosures with standard mounting brackets removed are
ideally suited for mounting on pedestals
Finish
ANSI 61 gray polyester powder paint inside and out over
phosphatized surfaces.
Industry Standards
Application
Designed to hold 30.5mm or 22.5mm oil-tight pushbuttons,
switches, and pilot lights where slanted control surfaces are desired.
Sloping front pushbutton enclosures provide protection against dirt,
dust, oil, and water.
UL 508A, File Number E61997: Type 12, 13
NEMA/EEMAC Type 12, 13
CSA File Number 42186: Type 12
IEC 60529, IP65
Construction
Accessories
•
•
•
•
•
•
See Accessories chapter.
14 gauge steel
Seams continuously welded and ground smooth
Captivated cover screws thread into sealed wells
Grounding stud in body of enclosure
Bonding provision on cover
Oil-resistant gasket and adhesive
Corrosion Inhibitors
Oiltight Hole Seals
Pedestals
Tamper Resistant Screws
Touch-Up Paint (ATPPY61)
Standard Sizes Sloping Front 30.5mm and 22.5mm Pushbutton Enclosures with Panels
Catalog
Number
AxBxC
in. (mm)
E1PBA
3.50 x 3.25 x 4.84
(89 x 83 x 123)
3.50 x 3.25 x 4.84
(89 x 83 x 123)
3.50 x 5.50 x 4.84
(89 x 140 x 123)
3.50 x 5.50 x 4.84
(89 x 140 x 123)
3.50 x 7.75 x 4.84
(89 x 197 x 123)
3.50 x 7.75 x 4.84
(89 x 197 x 123)
3.50 x 10.00 x 4.84
(89 x 254 x 123)
3.50 x 10.00 x 4.84
(89 x 254 x 123)
7.25 x 6.25 x 6.75
(184 x 159 x 171)
7.25 x 6.25 x 6.75
(184 x 159 x 171)
7.25 x 8.50 x 6.75
(184 x 216 x 171)
7.25 x 8.50 x 6.75
(184 x 216 x 171)
7.25 x 10.75 x 6.75
(184 x 273 x 171)
7.25 x 10.75 x 6.75
(184 x 273 x 171)
9.50 x 8.50 x 7.88
(241 x 216 x 200)
9.50 x 8.50 x 7.88
(241 x 216 x 200)
7.25 x 13.00 x 6.75
(184 x 330 x 171)
7.25 x 13.00 x 6.75
(184 x 330 x 171)
7.25 x 15.25 x 6.75
(184 x 387 x 171)
7.25 x 15.25 x 6.75
(184 x 387 x 171)
E1PBAM
E2PBA
E2PBAM
E3PBA
E3PBAM
E4PBA
E4PBAM
E4SPBA
E4SPBAM
E6PBA
E6PBAM
E8PBA
E8PBAM
E9PBA
E9PBAM
E10PBA
E10PBAM
E12PBA
E12PBAM
OI-130
Hole
Size
(mm) 
Mounting
Number G x H
of Holes  in. (mm)
Overall
LxW
in. (mm)
30.5
1
22.5
1
30.5
2
22.5
2
30.5
3
22.5
3
30.5
4
22.5
4
30.5
4
22.5
4
30.5
6
22.5
6
30.5
8
22.5
8
30.5
9
22.5
9
30.5
10
22.5
10
30.5
12
22.5
12
4.53 x 3.47
(115 x 88)
4.53 x 3.47
(115 x 88)
4.53 x 5.72
(115 x 145)
4.53 x 5.72
(115 x 145)
4.53 x 7.97
(115 x 202)
4.53 x 7.97
(115 x 202)
4.53 x 10.22
(115 x 260)
4.53 x 10.22
(115 x 260)
7.78 x 6.47
(198 x 164)
7.78 x 6.47
(198 x 164)
7.78 x 8.72
(198 x 221)
7.78 x 8.72
(198 x 221)
7.78 x 10.97
(198 x 279)
7.78 x 10.97
(198 x 279)
9.73 x 8.72
(247 x 221)
9.73 x 8.72
(247 x 221)
7.78 x 13.22
(198 x 336)
7.78 x 13.22
(198 x 336)
7.78 x 15.47
(198 x 393)
7.78 x 15.47
(198 x 393)
Subject to change without notice
4.03 x 2.38
(102 x 60)
4.03 x 2.38
(102 x 60)
4.03 x 4.62
(102 x 117)
4.03 x 4.62
(102 x 117)
4.03 x 6.88
(102 x 175)
4.03 x 6.88
(102 x 175)
4.03 x 9.12
(102 x 232)
4.03 x 9.12
(102 x 232)
7.28 x 5.38
(185 x 137)
7.28 x 5.38
(185 x 137)
7.28 x 7.62
(185 x 194)
7.28 x 7.62
(185 x 194)
7.28 x 9.88
(185 x 251)
7.28 x 9.88
(185 x 251)
9.25 x 7.62
(235 x 194)
9.25 x 7.62
(235 x 194)
7.28 x 12.12
(185 x 308)
7.28 x 12.12
(185 x 308)
7.28 x 14.38
(185 x 365)
7.28 x 14.38
(185 x 365)
N
(in.) 
N
P
(mm)  (in.) 
P
T
(mm)  (in.) 
T
X
(mm)  (in.) 
X
Y
(mm)  (in.) 
Y
(mm) 
3.53
90
3.34
85
3
76
1.73
44
1.86
47
3.53
90
3.34
85
3
76
1.73
44
1.86
47
3.53
90
3.34
85
5.25
133
1.73
44
1.86
47
3.53
90
3.34
85
5.25
133
1.73
44
1.86
47
3.53
90
3.34
85
7.5
191
1.73
44
1.86
47
3.53
90
3.34
85
7.5
191
1.73
44
1.86
47
3.53
90
3.34
85
9.75
248
1.73
44
1.86
47
3.53
90
3.34
85
9.75
248
1.73
44
1.86
47
6.78
172
5.22
133
6
152
2.11
54
2.61
66
6.78
172
5.22
133
6
152
2.11
54
2.61
66
6.78
172
5.22
133
8.25
210
2.11
54
2.61
66
6.78
172
5.22
133
8.25
210
2.11
54
2.61
66
6.78
172
5.22
133
10.5
267
2.11
54
2.61
66
6.78
172
5.22
133
10.5
267
2.11
54
2.61
66
8.73
222
6.34
161
8.25
210
2.11
54
2.61
66
8.73
222
6.34
161
8.25
210
2.11
54
2.61
66
6.78
172
5.22
133
12.75
324
2.11
54
2.61
66
6.78
172
5.22
133
12.75
324
2.11
54
2.61
66
6.78
172
5.22
133
15
381
2.11
54
2.61
66
6.78
172
5.22
133
15
381
2.11
54
2.61
66
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Consolets and Pushbutton
Enclosures
22.5mm
Sloping Front 30.5mm and
Pushbutton Enclosures
Catalog
Number
AxBxC
in. (mm)
E12SPBA
Subject to change without notice
Mounting
Number G x H
of Holes  in. (mm)
Overall
LxW
in. (mm)
30.5
12
22.5
12
30.5
16
22.5
16
30.5
16
22.5
16
30.5
20
22.5
20
30.5
25
22.5
25
30.5
30
22.5
30
11.69 x 8.72
(297 x 221)
11.69 x 8.72
(297 x 221)
7.78 x 19.97
(198 x 507)
7.78 x 19.97
(198 x 507)
11.69 x 10.97
(297 x 279)
11.69 x 10.97
(297 x 279)
11.69 x 13.22
(297 x 336)
11.69 x 13.22
(297 x 336)
13.62 x 13.22
(346 x 336)
13.62 x 13.22
(346 x 336)
13.62 x 15.47
(346 x 393)
13.62 x 15.47
(346 x 393)
11.19 x 7.62
(284 x 194)
11.19 x 7.62
(284 x 194)
7.28 x 18.88
(185 x 480)
7.28 x 18.88
(185 x 480)
11.19 x 9.88
(284 x 251)
11.19 x 9.88
(284 x 251)
11.19 x 12.12
(284 x 308)
11.19 x 12.12
(284 x 308)
13.12 x 12.12
(333 x 308)
13.12 x 12.12
(333 x 308)
13.12 x 14.38
(333 x 365)
13.12 x 14.38
(333 x 365)
PB1
N
(in.) 
N
P
(mm)  (in.) 
P
T
(mm)  (in.) 
T
X
(mm)  (in.) 
X
Y
(mm)  (in.) 
Y
(mm) 
10.69
272
7.47
190
8.25
210
2.11
54
2.61
66
10.69
272
7.47
190
8.25
210
2.11
54
2.61
66
6.78
172
5.22
133
19.5
495
2.11
54
2.61
66
6.78
172
5.22
133
19.5
495
2.11
54
2.61
66
10.69
272
7.47
190
10.5
267
2.11
54
2.61
66
10.69
272
7.47
190
10.5
267
2.11
54
2.61
66
10.69
272
7.49
190
12.75
324
2.11
54
2.61
66
10.69
272
7.49
190
12.75
324
2.11
54
2.61
66
12.62
321
8.59
218
12.75
324
2.11
54
2.61
66
12.62
321
8.59
218
12.75
324
2.11
54
2.61
66
12.62
321
8.59
218
15
381
2.11
54
2.61
66
12.62
321
8.59
218
15
381
2.11
54
2.61
66
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-131
Operator Interface
Enclosure Systems
11.75 x 8.50 x 9.00
(298 x 216 x 229)
E12SPBAM 11.75 x 8.50 x 9.00
(298 x 216 x 229)
E16SPBAH 7.25 x 19.75 x 6.75
(184 x 502 x 171)
E16SPBAHM 7.25 x 19.75 x 6.75
(184 x 502 x 171)
E16PBA
11.75 x 10.75 x 9.00
(298 x 273 x 229)
E16PBAM
11.75 x 10.75 x 9.00
(298 x 273 x 229)
E20PBA
11.75 x 13.00 x 9.00
(298 x 330 x 229)
E20PBAM
11.75 x 13.00 x 9.00
(298 x 330 x 229)
E25PBA
14.00 x 13.00 x 10.12
(356 x 330 x 257)
E25PBAM
14.00 x 13.00 x 10.12
(356 x 330 x 257)
E30PBA
14.00 x 15.25 x 10.12
(356 x 387 x 257)
E30PBAM
14.00 x 15.25 x 10.12
(356 x 387 x 257)
Hole
Size
(mm) 
Bulletin
Consolets and Pushbutton
Enclosures
Extra-Large 30.5mm and 22.5mm
Pushbutton Enclosures with Panels
Bulletin
PB1
• Oil-resistant gasket and adhesive
• Removable 14 gauge panel included, supported by weldnuts
• Bonding provision on cover
Finish
ANSI 61 gray polyester powder paint inside and out over
phosphatized surfaces. Panels are white.
Industry Standards
Application
Designed to hold 30.5mm or 22.5mm oiltight pushbuttons, switches,
and pilot lights with extra size to allow 2.50 inches between centers
of pushbutton holes. Enclosures provide protection against dirt,
dust, oil, and water.
Construction
•
•
•
•
•
14 gauge steel
Seams continuously welded and ground smooth
Captivated cover screws thread into sealed wells
Cover attached to body with continuous hinge
4-way pushbutton holes accept all brands of oiltight pushbuttons,
switches, and pilot lights
UL 508A, File Number E61997: Type 12, 13
NEMA/EEMAC Type 12, 13
JIC Standard EGP-1-1967 and EMP-1-1967
CSA File Number 42186: Type 12
IEC 60529, IP65
Accessories
See Accessories chapter.
Corrosion Inhibitors
Oiltight Hole Seals
Pedestals
Tamper Resistant Screws
Touch-Up Paint (ATPPY61)
Standard Sizes Extra-Large 30.5mm and 22.5mm Pushbutton Enclosures with Panels
Catalog
Number
AxBxC
in. (mm)
Number of
Hole Size (mm) Holes
Panel Size D x E
(inch)
Panel Size D x E
(mm)
Mounting G x H
(inch)
Mounting G x H
(mm)
E4SPBY25
8.50 x 7.50 x 6.00
(216 x 191 x 152)
8.50 x 7.50 x 6.00
(216 x 191 x 152)
11.00 x 7.50 x 6.00
(279 x 191 x 152)
11.00 x 7.50 x 6.00
(279 x 191 x 152)
11.00 x 10.00 x 6.00
(279 x 254 x 152)
11.00 x 10.00 x 6.00
(279 x 254 x 152)
13.50 x 10.00 x 6.00
(343 x 254 x 152)
13.50 x 10.00 x 6.00
(343 x 254 x 152)
13.50 x 12.50 x 6.00
(343 x 318 x 152)
13.50 x 12.50 x 6.00
(343 x 318 x 152)
16.00 x 12.50 x 6.00
(406 x 318 x 152)
16.00 x 12.50 x 6.00
(406 x 318 x 152)
16.00 x 15.00 x 6.00
(406 x 381 x 152)
16.00 x 15.00 x 6.00
(406 x 381 x 152)
18.50 x 15.00 x 6.00
(470 x 381 x 152)
18.50 x 15.00 x 6.00
(470 x 381 x 152)
18.50 x 17.50 x 6.00
(470 x 445 x 152)
18.50 x 17.50 x 6.00
(470 x 445 x 152)
21.00 x 17.50 x 6.00
(533 x 445 x 152)
21.00 x 17.50 x 6.00
(533 x 445 x 152)
30.5
4
6.50 x 5.50
165 x 140
9.00 x 6.62
229 x 168
22.5
4
6.50 x 5.50
165 x 140
9.00 x 6.62
229 x 168
30.5
6
9.00 x 5.50
229 x 140
11.50 x 6.62
292 x 168
22.5
6
9.00 x 5.50
229 x 140
11.50 x 6.62
292 x 168
30.5
9
9.00 x 8.00
229 x 203
11.50 x 9.12
292 x 232
22.5
9
9.00 x 8.00
229 x 203
11.50 x 9.12
292 x 232
30.5
12
11.50 x 8.00
292 x 203
14.00 x 9.12
356 x 232
22.5
12
11.50 x 8.00
292 x 203
14.00 x 9.12
356 x 232
30.5
16
11.50 x 10.50
292 x 267
14.00 x 11.62
356 x 295
22.5
16
11.50 x 10.50
292 x 267
14.00 x 11.62
356 x 295
30.5
20
14.00 x 10.50
356 x 267
16.50 x 11.62
419 x 295
22.5
20
14.00 x 10.50
356 x 267
16.50 x 11.62
419 x 295
30.5
25
14.00 x 13.00
356 x 330
16.50 x 14.12
419 x 359
22.5
25
14.00 x 13.00
356 x 330
16.50 x 14.12
419 x 359
30.5
30
16.50 x 13.00
419 x 330
19.00 x 14.12
483 x 359
22.5
30
16.50 x 13.00
419 x 330
19.00 x 14.12
483 x 359
30.5
36
16.50 x 15.50
419 x 394
19.00 x 16.62
483 x 422
22.5
36
16.50 x 15.50
419 x 394
19.00 x 16.62
483 x 422
30.5
42
19.00 x 15.50
483 x 394
21.50 x 16.62
546 x 422
22.5
42
19.00 x 15.50
483 x 394
21.50 x 16.62
546 x 422
E4SPBY25M
E6PBY25
E6PBY25M
E9PBY25
E9PBY25M
E12PBY25
E12PBY25M
E16PBY25
E16PBY25M
E20PBY25
E20PBY25M
E25PBY25
E25PBY25M
E30PBY25
E30PBY25M
E36PBY25
E36PBY25M
E42PBY25
E42PBY25M
OI-132
Subject to change without notice
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Consolets and Pushbutton
Enclosures
22.5mm
Extra-Large 30.5mm and
Pushbutton Enclosures with Panels
Bulletin
PB1
Operator Interface
Enclosure Systems
Subject to change without notice
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-133
Consolets and Pushbutton
Enclosures
Extra-Deep 30.5mm and 22.5mm
Pushbutton Enclosures
Bulletin
PB1
•
•
•
•
Grounding stud in body of enclosure
Bonding provision on cover
Oil-resistant gasket and adhesive
4-way pushbutton holes accept all brands of oiltight pushbuttons,
switches, and pilot lights
• Enclosures 6.00 x 4.00 x 4.75 in. (152 x 102 x 121mm) and larger
have internal detachable hinge to hold cover open during wiring,
yet permit immediate removal
Finish
ANSI 61 gray polyester powder paint inside and out over
phosphatized surfaces.
Industry Standards
UL 508A, File Number E61997: Type 12, 13
NEMA/EEMAC Type 12, 13
JIC Standard EGP-1-1967
CSA File Number 42186: Type 12
IEC 60529, IP65
Application
Designed to hold 30.5mm or 22.5mm oiltight pushbuttons, switches,
and pilot lights. Enclosures provide protection against dirt, dust,
oil, and water. Extra-deep design accommodates additional contact
blocks for pushbuttons.
NOTE: See Corrosion-Resistant Enclosures for information on related stainless
steel products.
Construction
Accessories
See Accessories chapter.
Corrosion Inhibitors
Oiltight Hole Seals
Pedestals
Tamper Resistant Screws
Touch-Up Paint (ATPPY61)
• 16 or 14 gauge steel; 14 gauge bodies, 16 gauge covers
• Seams continuously welded and ground smooth
• Captivated cover screws thread into sealed wells
Standard Sizes Extra-Deep 30.5mm and 22.5mm Pushbutton Enclosures
Catalog
Number
E1PBX
E1PBXM
E2PBX
E2PBXM
E3PBX
E3PBXM
E4PBX
E4PBXM
E4SPBX
E4SPBXM
E6PBX
E6PBXM
E9PBX
E9PBXM
E10PBX
E10PBXM
OI-134
AxBxC
in. (mm)
4.00 x 4.00 x 4.75
(102 x 102 x 121)
4.00 x 4.00 x 4.75
(102 x 102 x 121)
6.00 x 4.00 x 4.75
(152 x 102 x 121)
6.00 x 4.00 x 4.75
(152 x 102 x 121)
8.00 x 4.00 x 4.75
(203 x 102 x 121)
8.00 x 4.00 x 4.75
(203 x 102 x 121)
10.00 x 4.00 x 4.75
(254 x 102 x 121)
10.00 x 4.00 x 4.75
(254 x 102 x 121)
7.25 x 6.25 x 4.75
(184 x 159 x 121)
7.25 x 6.25 x 4.75
(184 x 159 x 121)
9.50 x 6.25 x 4.75
(241 x 159 x 121)
9.50 x 6.25 x 4.75
(241 x 159 x 121)
9.50 x 8.50 x 4.75
(241 x 216 x 121)
9.50 x 8.50 x 4.75
(241 x 216 x 121)
14.00 x 6.25 x 4.75
(356 x 159 x 121)
14.00 x 6.25 x 4.75
(356 x 159 x 121)
Hole Size
(mm)
Number
of Holes
Gauge
Mounting
G x H (in.)
Mounting
G x H (mm)
Overall
L x W (in.)
Overall
L x W (mm)
T (in.)
T (mm) Y (in.)
Y (mm)
30.5
1
16
4.50 x 3.12
114 x 79
5.00 x 4.22
127 x 107
3.75
95
2.11
54
22.5
1
16
4.50 x 3.12
114 x 79
5.00 x 4.22
127 x 107
3.75
95
2.11
54
30.5
2
14
6.50 x 3.12
165 x 79
7.00 x 4.22
178 x 107
3.75
95
1.98
50
22.5
2
14
6.50 x 3.12
165 x 79
7.00 x 4.22
178 x 107
3.75
95
1.98
50
30.5
3
14
8.50 x 3.12
216 x 79
9.00 x 4.22
229 x 107
3.75
95
1.86
47
22.5
3
14
8.50 x 3.12
216 x 79
9.00 x 4.22
229 x 107
3.75
95
1.86
47
30.5
4
14
10.50 x 3.12
267 x 79
11.00 x 4.22
279 x 107
3.75
95
1.73
44
22.5
4
14
10.50 x 3.12
267 x 79
11.00 x 4.22
279 x 107
3.75
95
1.73
44
30.5
4
14
7.75 x 5.38
197 x 137
8.25 x 6.47
210 x 164
6.00
152
2.61
66
22.5
4
14
7.75 x 5.38
197 x 137
8.25 x 6.47
210 x 164
6.00
152
2.61
66
30.5
6
14
10.00 x 5.38
254 x 137
10.50 x 6.47
267 x 164
6.00
152
2.61
66
22.5
6
14
10.00 x 5.38
254 x 137
10.50 x 6.47
267 x 164
6.00
152
2.61
66
30.5
9
14
10.00 x 7.62
254 x 194
10.50 x 8.72
267 x 221
8.25
210
2.61
66
22.5
9
14
10.00 x 7.62
254 x 194
10.50 x 8.72
267 x 221
8.25
210
2.61
66
30.5
10
14
14.50 x 5.38
368 x 137
15.00 x 6.47
381 x 164
6.00
152
2.61
66
22.5
10
14
14.50 x 5.38
368 x 137
15.00 x 6.47
381 x 164
6.00
152
2.61
66
Subject to change without notice
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Consolets and Pushbutton
Enclosures
22.5mm
Extra-Deep 30.5mm and
Pushbutton Enclosures
Bulletin
PB1
Standard Sizes Extra-Deep 30.5mm and 22.5mm Pushbutton Enclosures (Cont.)
Catalog
Number
E12PBX
E12PBXM
E16SPBXV
E16SPBXVM
E16PBX
E20PBX
E20PBXM
E25PBX
E25PBXM
in. (mm)
11.75 x 8.50 x 4.75
(298 x 216 x 121)
11.75 x 8.50 x 4.75
(298 x 216 x 121)
20.75 x 6.25 x 4.75
(527 x 159 x 121)
20.75 x 6.25 x 4.75
(527 x 159 x 121)
11.75 x 10.75 x 4.75
(298 x 273 x 121)
11.75 x 10.75 x 4.75
(298 x 273 x 121)
14.00 x 10.75 x 4.75
(356 x 273 x 121)
14.00 x 10.75 x 4.75
(356 x 273 x 121)
14.00 x 13.00 x 4.75
(356 x 330 x 121)
14.00 x 13.00 x 4.75
(356 x 330 x 121)
Subject to change without notice
Hole Size
(mm)
Number
of Holes
Gauge
Mounting
G x H (in.)
Mounting
G x H (mm)
Overall
L x W (in.)
Overall
L x W (mm)
T (in.)
T (mm) Y (in.)
Y (mm)
30.5
12
14
12.25 x 7.62
311 x 194
12.75 x 8.72
324 x 221
8.25
210
2.61
66
22.5
12
14
12.25 x 7.62
311 x 194
12.75 x 8.72
324 x 221
8.25
210
2.61
66
30.5
16
14
21.25 x 5.38
540 x 137
21.75 x 6.47
552 x 164
6.00
152
2.61
66
22.5
16
14
21.25 x 5.38
540 x 137
21.75 x 6.47
552 x 164
6.00
152
2.61
66
30.5
16
14
12.25 x 9.88
311 x 251
12.75 x 10.97 324 x 279
10.50
267
2.61
66
22.5
16
14
12.25 x 9.88
311 x 251
12.75 x 10.97 324 x 279
10.50
267
2.61
66
30.5
20
14
14.50 x 9.88
368 x 251
15.00 x 10.97 381 x 279
10.50
267
2.61
66
22.5
20
14
14.50 x 9.88
368 x 251
15.00 x 10.97 381 x 279
10.50
267
2.61
66
30.5
25
14
14.50 x 12.12 368 x 308
15.00 x 13.22 381 x 336
12.75
324
2.61
66
22.5
25
14
14.50 x 12.12 368 x 308
15.00 x 13.22 381 x 336
12.75
324
2.61
66
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-135
Operator Interface
Enclosure Systems
E16PBXM
AxBxC
30.5mm and 22.5mm
Pushbutton Enclosures
Consolets and Pushbutton
Enclosures
Bulletin
PB1
•
•
•
•
Grounding stud in body of enclosure
Bonding provision on cover
Oil-resistant gasket and adhesive
4-way pushbutton holes accept all brands of oiltight pushbuttons,
switches, and pilot lights
• Enclosures with more than one column of pushbutton holes have
internal detachable hinge to hold cover open during wiring, yet
permit immediate removal
Finish
ANSI 61 gray polyester powder paint inside and out over
phosphatized surfaces.
Industry Standards
Application
Designed to hold 30.5mm or 22.5mm oiltight pushbuttons, switches,
and pilot lights. Enclosures provide protection against dirt, dust, oil,
and water.
NOTE: See Corrosion-Resistant Enclosures for information on related stainless
steel products.
Construction
• 16 or 14 gauge steel; 14 gauge bodies, 16 gauge covers
• Seams continuously welded and ground smooth
• Captivated cover screws thread into sealed wells
UL 508A, File Number E61997: Type 12, 13
NEMA/EEMAC Type 12, 13
JIC Standard EGP-1-1967
CSA File Number 42186: Type 12
IEC 60529, IP65
Accessories
See Accessories chapter.
Corrosion Inhibitors
Oiltight Hole Seals
Pedestals
Tamper Resistant Screws
Touch-Up Paint (ATPPY61)
Standard Sizes 30.5mm and 22.5mm Pushbutton Enclosures
Catalog
Number
AxBxC
in. (mm)
E1PB
3.50 x 3.25 x 2.75
(89 x 83 x 70)
E1PBG
3.50 x 3.25 x 2.75
(89 x 83 x 70)
E2PB
5.75 x 3.25 x 2.75
(146 x 83 x 70)
E2PBG
5.75 x 3.25 x 2.75
(146 x 83 x 70)
E3PB
8.00 x 3.25 x 2.75
(203 x 83 x 70)
E3PBG
8.00 x 3.25 x 2.75
(203 x 83 x 70)
E4PB
10.25 x 3.25 x 2.75
(260 x 83 x 70)
E4PBG
10.25 x 3.25 x 2.75
(260 x 83 x 70)
E4SPB
7.25 x 6.25 x 3.00
(184 x 159 x 76)
E4SPBG 7.25 x 6.25 x 3.00
(184 x 159 x 76)
E5PB
12.50 x 3.25 x 2.75
(317 x 83 x 70)
E5PBG
12.50 x 3.25 x 2.75
(317 x 83 x 70)
E6PBVL
14.75 x 3.25 x 2.75
(375 x 83 x 70)
E6PBGVL 14.75 x 3.25 x 2.75
(375 x 83 x 70)
E6PB
9.50 x 6.25 x 3.00
(241 x 159 x 76)
E6PBG
9.50 x 6.25 x 3.00
(241 x 159 x 76)
E8PB
20.25 x 3.25 x 2.75
(514 x 83 x 70)
E8PBG
20.25 x 3.25 x 2.75
(514 x 83 x 70)
OI-136
Hole Size Number
(mm)
of Holes
Ga.
Mounting
G x H (in.)
Mounting
Overall
G x H (mm) L x W (in.)
Overall
J
J
T
T
X
X
Y
Y
L x W (mm) (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm)
30.5
1
16
4.00 x 2.38
102 x 60
4.50 x 3.47
114 x 88
2.31
59
3.00
76
1.73
44
1.86
47
22.5
1
16
4.00 x 2.38
102 x 60
4.50 x 3.47
114 x 88
2.31
59
3.00
76
1.73
44
1.86
47
30.5
2
16
6.25 x 2.38
159 x 60
6.75 x 3.47
171 x 88
2.31
59
3.00
76
1.73
44
1.86
47
22.5
2
16
6.25 x 2.38
159 x 60
6.75 x 3.47
171 x 88
2.31
59
3.00
76
1.73
44
1.86
47
30.5
3
14
8.50 x 2.38
216 x 60
9.00 x 3.47
229 x 88
2.31
59
3.00
76
1.73
44
1.86
47
22.5
3
14
8.50 x 2.38
216 x 60
9.00 x 3.47
229 x 88
2.31
59
3.00
76
1.73
44
1.86
47
30.5
4
14
10.75 x 2.38
273 x 60
11.25 x 3.47
286 x 88
2.31
59
3.00
76
1.73
44
1.86
47
22.5
4
14
10.75 x 2.38
273 x 60
11.25 x 3.47
286 x 88
2.31
59
3.00
76
1.73
44
1.86
47
30.5
4
14
7.75 x 5.38
197 x 137
8.25 x 6.47
210 x 164
2.56
65
6.00
152
2.11
54
2.61
66
22.5
4
14
7.75 x 5.38
197 x 137
8.25 x 6.47
210 x 164
2.56
65
6.00
152
2.11
54
2.61
66
30.5
5
14
13.00 x 2.38
330 x 60
13.50 x 3.47
343 x 88
2.31
59
3.00
76
1.73
44
1.86
47
22.5
5
14
13.00 x 2.38
330 x 60
13.50 x 3.47
343 x 88
2.31
59
3.00
76
1.73
44
1.86
47
30.5
6
14
15.25 x 2.38
387 x 60
15.75 x 3.47
400 x 88
2.31
59
3.00
76
1.73
44
1.86
47
22.5
6
14
15.25 x 2.38
387 x 60
15.75 x 3.47
400 x 88
2.31
59
3.00
76
1.73
44
1.86
47
30.5
6
14
10.00 x 5.38
254 x 137
10.50 x 6.47
267 x 164
2.56
65
6.00
152
2.11
54
2.61
66
22.5
6
14
10.00 x 5.38
254 x 137
10.50 x 6.47
267 x 164
2.56
65
6.00
152
2.11
54
2.61
66
30.5
8
14
20.75 x 2.38 527 x 60
21.25 x 3.47
540 x 88
2.31
59
3.00
76
1.73
44
1.86
47
22.5
8
14
20.75 x 2.38 527 x 60
21.25 x 3.47
540 x 88
2.31
59
3.00
76
1.73
44
1.86
47
Subject to change without notice
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
30.5mm and 22.5mm
Pushbutton Enclosures
Consolets and Pushbutton
Enclosures
Bulletin
PB1
Standard Sizes 30.5mm and 22.5mm Pushbutton Enclosures (Cont.)
Catalog
Number
E9PB
E9PBG
E10PB
E10PBG
E12PB
E16PB
E16PBG
Hole Size Number
(mm)
of Holes
Ga.
Mounting
G x H (in.)
Mounting
Overall
G x H (mm) L x W (in.)
Overall
J
J
T
T
X
X
Y
Y
L x W (mm) (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm)
30.5
9
14
10.00 x 7.62
254 x 194
10.50 x 8.72
267 x 221
2.56
65
8.25
210
2.11
54
2.61
66
22.5
9
14
10.00 x 7.62
254 x 194
10.50 x 8.72
267 x 221
2.56
65
8.25
210
2.11
54
2.61
66
30.5
10
14
25.25 x 2.38 641 x 60
25.75 x 3.47
654 x 88
2.31
59
3.00
76
1.73
44
1.86
47
22.5
10
14
25.25 x 2.38 641 x 60
25.75 x 3.47
654 x 88
2.31
59
3.00
76
1.73
44
1.86
47
30.5
12
14
12.25 x 7.62
311 x 194
12.75 x 8.72
324 x 221
2.56
65
8.25
210
2.11
54
2.61
66
22.5
12
14
12.25 x 7.62
311 x 194
12.75 x 8.72
324 x 221
2.56
65
8.25
210
2.11
54
2.61
66
30.5
16
14
12.25 x 9.88
311 x 251
12.75 x 10.97 324 x 279
2.56
65
10.50 267
2.11
54
2.61
66
22.5
16
14
12.25 x 9.88
311 x 251
12.75 x 10.97 324 x 279
2.56
65
10.50 267
2.11
54
2.61
66
Subject to change without notice
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-137
Operator Interface
Enclosure Systems
E12PBG
AxBxC
in. (mm)
9.50 x 8.50 x 3.00
(241 x 216 x 76)
9.50 x 8.50 x 3.00
(241 x 216 x 76)
24.75 x 3.25 x 2.75
(629 x 83 x 70)
24.75 x 3.25 x 2.75
(629 x 83 x 70)
11.75 x 8.50 x 3.00
(298 x 216 x 76)
11.75 x 8.50 x 3.00
(298 x 216 x 76)
11.75 x 10.75 x 3.00
(298 x 273 x 76)
11.75 x 10.75 x 3.00
(298 x 273 x 76)
Consolets and Pushbutton
Enclosures
DPB Pushbutton Enclosures
Bulletin
PB1
Construction
• Drawn 16 gauge steel; no welded seams or sharp corners
• Cover screws thread into enclosure outside gasket line to prevent
leakage through cover screw holes
• Flanged cover
• Grounding stud in body of enclosure
• Bonding provision on cover
• Oil-resistant gasket and adhesive
Finish
ANSI 61 gray polyester powder paint inside and out over
phosphatized surfaces.
Industry Standards
UL 508A, File Number E61997: Type 4, 12, 13
NEMA/EEMAC Type 4, 12, 13
cUL CSA 22.2 No. 94, File No. E61997: Type 4, 12, 13
IEC 60529, IP66
Accessories
See Accessories chapter.
Corrosion Inhibitors
Oiltight Hole Seals
Touch-Up Paint (ATPPY61)
Application
Designed to hold oiltight pushbuttons, switches, and pilot lights that
mount in 30.5mm or 22.5mm 4-way pushbutton holes. Enclosures
provide protection against dirt, dust, and water.
Standard Sizes DPB Pushbutton Enclosures
Catalog A x B x C
Number in. (mm)
Hole
Mounting
Size No. of G x H
(mm) Holes in. (mm)
Cover
Type
Encl.
Depth
(P + V) F
K
L
M
P
Q
R
S
T
V
W
Y
in.
in.
in.
in.
in.
in.
in.
in.
in.
in.
in.
in.
in.
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
ED1PB1
30.5
1
Flat
—
—
—
—
—
—
—
—
—
—
—
—
30.5
1
Flat
—
—
—
—
—
30.5
3
Flat
—
—
—
—
30.5
4
Flat
—
—
—
—
30.5
1
Dome
22.5
1
30.5
2
22.5
2
30.5
3
22.5
3
30.5
4
22.5
4
4.98
(126)
4.98
(126)
4.98
(126)
4.98
(126)
4.98
(126)
4.98
(126)
4.98
(126)
4.98
(126)
4.00
(102)
6.25
(159)
8.50
(216)
10.75
(273)
4.00
(102)
4.00
(102)
6.25
(159)
6.25
(159)
8.50
(216)
8.50
(216)
10.75
(273)
10.75
(273)
—
Flat
4.50
(114)
6.75
(171)
9.00
(229)
11.25
(286)
4.50
(114)
4.50
(114)
6.75
(171)
6.75
(171)
9.00
(229)
9.00
(229)
11.25
(286)
11.25
(286)
—
2
1.50
(38)
3.75
(95)
6.00
(152)
8.25
(210)
1.50
(38)
1.50
(38)
3.75
(95)
3.75
(95)
6.00
(152)
6.00
(152)
8.25
(210)
8.25
(210)
—
30.5
3.00
(76)
3.00
(76)
3.00
(76)
3.00
(76)
3.00
(76)
3.00
(76)
3.00
(76)
3.00
(76)
3.00
(76)
3.00
(76)
3.00
(76)
3.00
(76)
1.00
(25)
1.00
(25)
1.00
(25)
1.00
(25)
1.00
(25)
1.00
(25)
1.00
(25)
1.00
(25)
3.03
(77)
3.03
(77)
3.03
(77)
3.03
(77)
3.03
(77)
3.03
(77)
3.03
(77)
3.03
(77)
2.53
(64)
2.53
(64)
4.78
(121)
4.78
(121)
7.03
(179)
7.03
(179)
9.25
(235)
9.25
(235)
2.06
(52)
4.31
(109)
6.56
(167)
8.81
(224)
2.06
(52)
2.06
(52)
4.31
(109)
4.31
(109)
6.56
(167)
6.56
(167)
8.81
(224)
8.81
(224)
2.56
(65)
2.56
(65)
2.56
(65)
2.56
(65)
2.56
(65)
2.56
(65)
2.56
(65)
2.56
(65)
2.56
(65)
2.56
(65)
2.56
(65)
2.56
(65)
2.98
(76)
2.98
(76)
2.98
(76)
2.98
(76)
3.98
(101)
3.98
(101)
3.98
(101)
3.98
(101)
3.98
(101)
3.98
(101)
3.98
(101)
3.98
(101)
4.50
(114)
4.50
(114)
4.50
(114)
4.50
(114)
4.50
(114)
4.50
(114)
4.50
(114)
4.50
(114)
4.50
(114)
4.50
(114)
4.50
(114)
4.50
(114)
ED1PB2
ED2PB
ED3PB
ED4PB
ED1PBX
ED1PBXM
ED2PBX
ED2PBXM
ED3PBX
ED3PBXM
ED4PBX
ED4PBXM
4.50 x 2.88 x 2.62
(114 x 73 x 67)
3.50 x 4.00 x 2.75
(89 x 102 x 70)
5.75 x 4.00 x 2.75
(146 x 102 x 70)
8.00 x 4.00 x 2.75
(203 x 102 x 70)
10.25 x 4.00 x 2.75
(260 x 102 x 70)
3.50 x 4.00 x 3.75
(89 x 102 x 95)
3.50 x 4.00 x 3.75
(89 x 102 x 95)
5.75 x 4.00 x 3.75
(146 x 102 x 95)
5.75 x 4.00 x 3.75
(146 x 102 x 95)
8.00 x 4.00 x 3.75
(203 x 102 x 95)
8.00 x 4.00 x 3.75
(203 x 102 x 95)
10.25 x 4.00 x 3.75
(260 x 102 x 95)
10.25 x 4.00 x 3.75
(260 x 102 x 95)
OI-138
5.00 x 1.12
(127 x 29)
4.00 x 2.38
(102 x 60)
6.25 x 2.38
(159 x 60)
8.50 x 2.38
(216 x 60)
10.75 x 2.38
(273 x 60)
4.00 x 2.38
(102 x 60)
4.00 x 2.38
(102 x 60)
6.25 x 2.38
(159 x 60)
6.25 x 2.38
(159 x 60)
8.50 x 2.38
(216 x 60)
8.50 x 2.38
(216 x 60)
10.75 x 2.38
(273 x 60)
10.75 x 2.38
(273 x 60)
Subject to change without notice
Dome
Dome
Dome
Dome
Dome
Dome
Dome
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
2.78
(71)
2.00
(51)
2.00
(51)
2.00
(51)
2.00
(51)
2.00
(51)
2.00
(51)
2.00
(51)
2.00
(51)
2.00
(51)
2.00
(51)
2.00
(51)
2.00
(51)
© 2007 Hoffman Enclosures Inc.
Consolets and Pushbutton
Enclosures
DPB Pushbutton Enclosures
Bulletin
PB1
Standard Sizes DPB Pushbutton Enclosures (Cont.)
Catalog A x B x C
Number in. (mm)
Cover
Type
22.5
1
Flat
—
—
—
—
—
—
—
—
—
—
—
—
22.5
1
Flat
—
—
—
—
—
22.5
3
Flat
—
—
—
—
22.5
4
Flat
—
4.00
(102)
6.25
(159)
8.50
(216)
10.75
(273)
—
Flat
4.50
(114)
6.75
(171)
9.00
(229)
11.25
(286)
—
2
1.50
(38)
3.75
(95)
6.00
(152)
8.25
(210)
—
22.5
3.00
(76)
3.00
(76)
3.00
(76)
3.00
(76)
—
—
—
2.06
(52)
4.31
(109)
6.56
(167)
8.81
(224)
2.56
(65)
2.56
(65)
2.56
(65)
2.56
(65)
3.98
(101)
3.98
(101)
3.98
(101)
3.98
(101)
4.50
(114)
4.50
(114)
4.50
(114)
4.50
(114)
Subject to change without notice
5.00 x 1.12
(127 x 29)
4.00 x 2.38
(102 x 60)
6.25 x 2.38
(159 x 60)
8.50 x 2.38
(216 x 60)
10.75 x 2.38
(273 x 60)
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
2.78
(71)
2.00
(51)
2.00
(51)
2.00
(51)
2.00
(51)
OI-139
Operator Interface
Enclosure Systems
ED1PBM1 4.50 x 2.88 x 2.62
(114 x 73 x 67)
ED1PBM2 3.50 x 4.00 x 3.75
(89 x 102 x 95)
ED2PBM 5.75 x 4.00 x 3.75
(146 x 102 x 95)
ED3PBM 8.00 x 4.00 x 3.75
(203 x 102 x 95)
ED4PBM 10.25 x 4.00 x 3.75
(260 x 102 x 95)
Hole
Mounting
Size No. of G x H
(mm) Holes in. (mm)
Encl.
Depth
(P + V) F
K
L
M
P
Q
R
S
T
V
W
Y
in.
in.
in.
in.
in.
in.
in.
in.
in.
in.
in.
in.
in.
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
Consolets and Pushbutton
Enclosures
Deep 22.5mm Pushbutton Enclosures
Bulletin
PB1
Application
Industry Standards
Designed to hold oiltight pushbuttons, switches, and pilot lights
that mount in 22.5mm 4-way pushbutton holes. Enclosures provide
protection against dirt, dust, oil, and water.
UL 508A, File Number E61997: Type 12, 13
NEMA/EEMAC Type 12, 13
JIC standards EGP-1-1967 and EMP-1-1967
CSA File Number 42186: Type 12
IEC 60529, IP65
Construction
•
•
•
•
•
•
•
14 gauge steel
Seams continuously welded and ground smooth
Captivated cover screws thread into sealed wells
Grounding stud in body of enclosure
Bonding provision on cover
Oil-resistant gasket and adhesive
Enclosures 8.50 x 5.00 x 4.25 in. (216 x 127 x 108mm) and larger
have internal detachable hinge to hold cover open during wiring,
yet permit immediate removal
Accessories
See Accessories chapter.
Corrosion Inhibitors
Oiltight Hole Seals
Pedestals
Tamper Resistant Screws
Touch-Up Paint (ATPPY61)
Finish
ANSI 61 gray polyester powder paint inside and out over
phosphatized surfaces.
Standard Sizes Deep 22.5mm Pushbutton Enclosures
Catalog
Number
E1PBGXM
E2PBGXM
E3PBGXM
E4PBGXM
E6PBGXM
E9PBGXM
E12PBGXM
OI-140
AxBxC
in. (mm)
3.25 x 2.75 x 3.50
(83 x 70 x 89)
5.12 x 2.75 x 3.50
(130 x 70 x 89)
7.25 x 2.75 x 3.50
(184 x 70 x 89)
9.50 x 2.75 x 3.00
(241 x 70 x 89)
8.50 x 5.00 x 4.25
(216 x 127 x 108)
8.50 x 7.25 x 4.25
(216 x 184 x 108)
10.38 x 7.25 x 4.25
(264 x 184 x 108)
Number Mounting
of Holes G x H (in.)
Mounting Overall
G x H (mm) L x W (in.)
Overall
L x W (mm) J (in.)
J (mm) T (in.)
T (mm) X (in.)
X (mm) Y (in.)
Y (mm)
1
3.75 x 1.88
95 x 48
4.25 x 2.97
108 x 75
3.09
78
2.50
64
1.48
38
1.73
44
2
5.62 x 1.88
143 x 48
6.12 x 2.97
155 x 75
3.09
78
2.50
64
1.48
38
1.55
39
3
7.75 x 1.88
197 x 48
8.25 x 2.97
210 x 75
3.09
78
2.50
64
1.48
38
1.48
38
4
10.00 x 1.88 254 x 48
10.50 x 2.97 267 x 75
3.09
78
2.50
64
1.48
38
1.48
38
6
9.00 x 4.12
229 x 105
9.50 x 5.22
241 x 133
3.84
98
4.75
121
1.48
38
2.11
54
9
9.00 x 5.63
229 x 162
9.50 x 7.47
241 x 190
3.84
98
6.25
159
1.48
38
2.11
54
12
10.88 x 5.63 276 x 162
11.38 x 7.47 289 x 190
3.84
98
6.25
159
1.48
38
1.92
49
Subject to change without notice
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Consolets and Pushbutton
Enclosures
Deep 22.5mm Pushbutton Enclosures
Bulletin
PB1
Operator Interface
Enclosure Systems
Subject to change without notice
PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
OI-141
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising