Sun Step Solar Pedometer

||
Sun Step Solar Pedometer
Operating Manual
This is a dual powered pedometer using solar and a
back up battery. The solar panel is used to generate
power to operate the pedometer inenvironments
with good sunlight or under strong light.
The backup battery will only be active when there is
not enough solar power to function the pedometer.
Function:
1. LCD Display 4. Mode Button
2. Solar Panel 5. Reset Button
3. Belt Clip 6. Set Button
Features:
- Step counter up to 99999 steps
- Distance traveled indication up to 999.99 KM/
999.99 Miles
- Calories burnt indication up to 999.99 Kcal
- Dual power system
- Metric and Imperial system selection
- Auto Shut Off
The paces are detected via the movement of the
waist. For accurate reading, mount the unit closer to
the centerof yourbody.
1. Step Counter Function
- Press MODE button until the bottom of the display
shows the word “Step”. The step counter will start
counting once motion is detected.
- To avoid counting sudden movement as steps,
the pedometer does not display the step count for
the first 4 steps (or less). If you continue walking
for more than 4 steps, the display will show the
first 5 steps walked and continue to count.
- To reset the counter, press and hold the RESET
button until the digits revert back to zero.
2. DistanceTraveled
- Press MODE button until the bottom of the display
shows KM the for the Metric version or MILE for the
Imperial version.
- Press the SET button for adjusting the stride
distance i.e. the distance for each pace. The digits
on the display will start to flash **
- Press the RESET button as many times as
necessary to adjust to the desired value. Once the
value is set, leave the unit idle for 5 seconds, it will
revert back to Distance Traveled mode.
- The Distance Traveled counter will start counting
once motion is detected.
- To reset the counter, press and hold the RESET
button until the digits revert back to zero
Note:
** Stride Setting
- Metric: Range from 30 cm — 150 cm; with setting at
2 ст interval
- Imperial: Range from 12 inch — 60 inch; with setting at
1 inch interval
- Default Stride: 30 inch / 80 cm
3. Calorie Calculation
- Press MODE button urtil the bottom of the display
shows KCAL.
- Press the SET button for inputting your body weight.
The digits on the display will start to flash ##
- Press the RESET button as many times as necessary
to adjust your body weight value. Once the value is
set, leave the unit idle for 5 seconds, it will revert
back to calorie mode.
- The counter will start counting once motion is
detected.
- To reset the calorie counter, press and hold the
RESET button until the digits revert back to zero.
Note
## Weight setting
- Metric: range from 30 kg ~ 135 kg; with setting at 1 kg
interval
- Imperial: range from 60 Ib - 300 Ib; with setting at 1 Ib
interval
- Default weight: 100 Ib / 45 kg
4. Metric and Imperial
The pedometer can be set to either Imperial or Metric
system.
- Under any mode, press and hold the MODE button
until the display blinks and digits revert back to zero.
- Press MODE button to Distance Traveled mode and
checkthe bottom line indicator to see if it is in Imperial
or Metricformat
5. Auto Shut Off
If no motion is detected for 1 minute, the unit will
automatically shut off. The value of the pedometer will
still be retained in memory. It will resume once motion
is detected
6. Specifications
- Back up battery: Ag 13 x 1 pc
Note:
- Be sure to operate and maintain pedometer properly
and with care.
- Do not disassemble instrument or replace back up
battery. Doing so could cause damage and affect the
accuracy of the pedometer measurement.
Troubleshooting:
Problems Cause & Remedy
Mount the pedometer properly
according to the manual and
ensure your walking method is
correct
Not all your steps
were detected
The pedometer has been put
under direct sunlight or operated
LCD is black in high temperature for too long.It
willrecoverback to normal status
inthe shade
Patent ID US D578419S
Made in China
Size: 176x105 mm

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project