Charger Module - Baldwin Boxall

Charger Module - Baldwin Boxall
The next generation ...
Charger Module
Certified to BSEN54
VIGIL3 is our next generation of voice alarm
system products. The charger module fits
alongside the VIGIL3 amplifiers in a 2U
mainframe.
Our VIGIL3 range, as with all of our
products, has been designed and built with
quality and absolute reliability in mind.
VIGIL 3
FEATURES & BENEFITS:
THE VIGIL3 RANGE:
•
The VIGIL3 battery charger module (BVMBC) is compact;
it is actually half the size of the VIGIL2 power supply
charger unit.
•
This new range of products has been designed using the
latest technology.
•
Current products include:
•
The module continually monitors the system backup
batteries and charges them whenever this is necessary.
•
Neatly fits alongside the VIGIL3 amplifiers in a 2U
mainframe.
•
Only one charger module is required for up to five VIGIL3
amplifier modules.
•
Continually monitors the power supplies in five VIGIL3
amplifier modules.
•
The module features an auxiliary DC output which can
be used for powering other equipment.
•
For use with the new more powerful, lighter weight
VIGIL3 amplifiers:
•
•
•
•
•
•
Dual 75 Watt (BVO75D)
Quad 75 Watt (BVO75Q)
Dual 150 Watt (BV150D)
Quad 150 Watt (BV150Q)
Dual 300 Watt (BV300D)
The BVMBC, when used with VIGIL3 amplifiers and the
EVAS BVRD2M(4) router(s), forms a complete EN54
compliant voice alarm system.
VOICE ALARM
PUBLIC ADDRESS
•
•
VIGIL3 amplifiers.
•
VIGIL3 battery charger module.
•
Touch screen microphone.
•
VIGIL3 Eclipse4 wall mountable system.
Benefits include:
•
Less weight.
•
Reduction in rack size.
•
Greater amplification per mainframe.
•
Sleep mode on battery power and mains power.
•
Reduction in copper used for manufacture of
amplifiers.
•
Reduced shipping costs - due to weight and size
reduction of racks.
•
Touch screen microphone control.
For more information on VIGIL3, or any of our products,
please refer to our website or contact our Sales /
Marketing teams who will be happy to help.
Specifications:
Parameter
Specification
Maximum battery
capacity
5 x VIGIL3 amplifier modules: 150 Ah
4 x VIGIL3 amplifier modules: 150 Ah
3 x VIGIL3 amplifier modules: 150 Ah
2 x VIGIL3 amplifier modules: 100 Ah
1 x VIGIL3 amplifier modules: 55 Ah
Minimum battery
capacity
5 x VIGIL3 amplifier modules: 100 Ah
4 x VIGIL3 amplifier modules: 80 Ah
3 x VIGIL3 amplifier modules: 60 Ah
2 x VIGIL3 amplifier modules: 40 Ah
1 x VIGIL3 amplifier modules: 20 Ah
Charge voltage @
20°C
Temperature
compensation
27.35V
No supply from connected VIGIL3 amplifier(s)
AC mains not connected to VIGIL3 amplifier(s)
VIGIL3 amplifier(s) internal 12V supply failed
VIGIL3 amplifier(s) internal 180V supply failed
BVMBC Aux DC output failed
Fuse*
VIGIL3 amplifiers DC charging supply <28V
Charge voltage >29V
Charge voltage <21V
Charger*
Battery Hi Res*
Battery resistance greater than set point
Battery low Volt*
BVMBC battery voltage <21V
VIGIL3 amplifier(s) battery voltage <21V
-48mV/°C
Battery low fault
voltage
21V
Battery deep
discharge cut off
voltage
18V
Maximum charge
current 10A (2A /
amplifier module)
10A
Battery high
resistance fault
22m Ohm (above set point)*
Aux DC output
voltage
30V (mains present)
Battery voltage (mains not present)
Aux DC output
max current
2A
Volt free fault relay
output contacts
Specification
Parameter
Common fault
relay indicated
faults
Fuse
Charger
Battery high resistance
Battery low voltage
Connected VIGIL3 amplifier(s) over temperature
Connected VIGIL3 amplifier(s) data fault
Terminations
Battery connection
2 pin screw connector
Aux DC, fault relay
& external temp
sensor connection
8 pin screw connector
DC & Data (VIGIL3
amp connections)
5 x RJ45 connectors
100V @ 1A Max
Front panel indicators
Power on
OK
Battery or amplifier supply present
No fault
* If a fault has been indicated that has subsequently cleared, the
corresponding fault LED will flash. Briefly pressing the L/Test button will
clear this indication. If the fault is currently present then the LED illuminates
steadily and cannot be extinguished with the L/Test button.
Baldwin Boxall Communications Ltd
Wealden Industrial Estate, Farningham Road,
Crowborough, East Sussex, TN6 2JR, United Kingdom
T: +44 (0) 1892 664422 F: +44 (0) 1892 663146
E: mail@baldwinboxall.co.uk
W: www.baldwinboxall.co.uk
WE RESERVE THE RIGHT TO CHANGE THE TECHNICAL SPECIFICATION WITHOUT PRIOR NOTICE. DOC NO: 1.0063.05.17
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising