Thermal Image Camera EC-800-TIC-EX-ALU/SST

Thermal Image Camera EC-800-TIC-EX-ALU/SST
Product
DATA
Data sheet no DS0401120 | EN
2012 | R1-4
Zone 1,2,21,22
CE0344
Ex II 2 G Ex ib mb px IIC T6 ... T5 Gb
Ex II 2 D Ex mb tb IIIC T89°C Db
Thermal Image Camera EC-800-TIC-EX-ALU/SST series
R. STAHL Camera Systems GmbH
Im Gewerbegebiet Pesch 14 | D-50767 Cologne | Germany
Phone: +49 221 59 808 300
Website: www.stahl-camera.de
Zone 1,2,21,22
Technical Specifications
CE 0344
Ex II 2 G
Ex II 2 D
Ex ib mb px IIC T6 ... T5 Gb
Ex mb tb IIIC T89°C Db
Thermal Image Camera EC-800-TIC-EX-ALU/SST series
Article
Ex-PCB-Connetion Board Article
Article
EC-800-TIC-EX-ALUArticle
Ex-PCB-Connetion Board
EC-800-TIC-EX-SST
Thermal Image Camera EC-800-TIC-EX-ALU/SST series
Sensor
Pixels
Frame Rates Sensitivity Scene Range Digital zoom
Video
Lens Color
Fuse
Construction ALU Construction SST Protection Bracket Operating temperature:
Weight aluminium Weight stainless steel Power input Power consumption Communication Cable Electrical parameters
Thermal Imager Uncooled VOx Microbolometer.
FPA Format 324 x 256 (25-micron pixel size).
7,5 Hz (NTSC); 8,3 Hz (PAL).
<75 mk, <50 mk f/1,0.
-40°C to +160°C.
2x & 4x.
NTSC or PAL.
WFOV, 19mm (24° human detection 450m).
4 Color Palettes (LUTs).
The camera must be protected with a 315 mA-T fuse, with 1500A breaking
capacity. Placed on the Ex-board, see Installation manual IM0973150.
Sun cover and housing: Aluminium (AlMgSi1). Bracket and mounting parts: SST 316.
Sun cover and housing: Stainless Steel 316. Bracket and mounting parts: SST 316.
IP68; (4m under water, during 4 hours) according to IEC 60529, dry-nitrogen filled, 1,4 Bar overpressure monitored by 2 absolute pressure sensors, long term stability 0,1% per year. Voltage barriers for sensor circuit.
Standard bracket, including bolts, nuts and washers. Suitable for mounting hanging, overhead and standing.
T5: Tamb -40°C to +75°C. T6: Tamb -40°C to +20°C.
3 kg (including 5m cable).
6 kg (including 5 m cable).
24V/DC +/-10%.
Temperature <0°C (heater on): 5,6W. Temperature >0°C (heater off): 3,6 W.
RS 232 Visca protocol 9,6 Kbps or RS232 Pelco D 9,6 Kbps.
Min. cable bending radius 50mm.
Um = 30V/DC.
NOTE:
For more installation and
specification details see
the Installation manual
IM0973150
NOTE:
The Ex certificate applies
only when both, in this data
sheet mentioned, components are used.
Green Passport
All materials are compliant to
Green Passport requirements
according IMO resolution
MEPC.197(62) as adopted
on July, 15th 2011 (Maritime
sector: International Maritime
Organization concerning
the functions of the Marine
Environment Protection
Committee).
Ex-PCB Connection Board
Temperatuur range -40°C ... +80°C
Weight
0.3 Kg
Power input 24V/DC +/-10%
The Ex-PCB Connection Board monitors the gas-pressurised camera via an intrinsic safe circuit. Whenever the protection by pressure fails all power is
switched off
and a buzzer
will sound. This
board
be used in combination with the
cameras
mentioned
in this datasheet Art
to be
compliant with the
Standard
configuration
with
Boxmay
Ex only
board
Thermal
Image
Camera EC-800-TIC-EX-ALU,
no 8903720
applicable (EX-)regulations. This board can be mounted in a 19”-rack or in an Ex-board Box.
Thermal Image Camera EC-800-TIC-EX-SST, Art no 8903730
Box Ex board SSt
Electrical Parameters
Art no 0404910
Camera connector
Pan & Tilt connector
+
U0 = 24V /-10% U0 = 24V +/-10%
I0 = 315mA I0 = 500mA
P0 = 7,6W P0 = 12W
Power connector
Um = 29,5V
Ui = 24V +/-10%
Ii = 1A
Pi = 24W
12AWG
To Display
12AWG
Cable Base, 5m
Art No 1221300
Intrinsic
Pressure sensor connector
U0 = 12V
Pi = 0,8W
I0 = 100mA
C0 = 460F
P0 = 1,2W
L0 = 1,5mH
Ui = 16V
Li = 0
Ii = 50mA
Li/Rim = 0
zone 1, 2
Standard configuration with Ex board plate
Thermal Image Camera EC-800-TIC-EX-ALU, Art no 8903720
Thermal
Image Camera EC-800-TIC-EX-SST, Art no 8903730
EC-800-TIC-EX-ALU/SST
Standard configuration with Ex-PCB Connection in
save/non-ex area Board
Set Ex board plate
Art no 0404960
To Display
12AWG
Cable Base, 5m
Art No 1221300
zone 1, 2
All data are subject to change without any notice. All dimensions are for commercial purpose only.
The camera/display systems comply with the latest CE, ADR, EMC and mirror-directive regulations.
All products are manufactured in accordance with the ISO 9001 quality management system, ISO 14001
environmental management systems and all Ex products with the IECEx scheme and ATEX directives.
www.stahl-camera.de
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising