C18EN002/A E0060-08/06
C18EN002/A
E0060-08/06
A low-mass, surface-treated aluminium/magnesium alloy cone behaves like a piston throughout the audible frequency range, without any sign of midrange resonances.
The coaxially mounted aluminium/magnesium alloy dome tweeter has a low resonance frequency, and integrates with the cone driver to form a point source.
The cone profile has been carefully designed to optimally load the tweeter’s radiation. A completely new rubber surround reduces resonances and prevents surround break up in the midrange band. The surround’s small inverted roll, combined with a profile that follows the shape
of the cone, results in almost total elimination of diffraction effects on the tweeter’s output.
The powerful neodymium magnet system, with its small profile and optimal shape, results in
high midrange sensitivity with minimal back wave reflections. Heavy copper rings mounted
above and below the T-shaped pole piece reduce nonlinear and modulation distortion and
increase overload margin. The crown-shaped copper tweeter support ring eliminates any resonance coming from the cavity between the tweeter body and midrange voice coil former.
All of these features work together to provide a smooth and well behaved off-axis response
throughout the entire operating range.
100
50
95
90
40
SPL [dB]
80
30
75
70
20
65
60
Impedance [ohm]
85
10
55
50
10
0
100
1 000
10 000
Frequency [Hz]
The frequency responses above show measured free field sound pressure in 0, 30, and 60 degrees angle using a 12L closed box. Input
2.83 VRMS, microphone distance 0.5m, normalized to SPL 1m. The dotted line is a calculated response in infinite baffle
based on the parameters given for this specific driver. The impedance is measured in free air without baffle using a 2V
sine signal.
Midrange
Tweeter
Midrange
Tweeter
Nominal Impedance
8 Ohms
6 Ohms
Recommended Frequency Range
150-3000Hz 2000-25000
Voice Coil Resistance
6.2 Ohms
5 Ohms
Voice Coil Inductance
0.62 mH
0.05 mH
Short Term Power Handling *
250 W
200 W
Force Factor
8.8 N/A
3.1 N/A
Long Term Power Handling *
100 W
90 W
Free Air Resonance
98 Hz
1430 Hz
Characteristic Sensitivity (2.83V, 1m) 87 dB
90 dB
Moving Mass excl. air
15.7 g
0.4 g
Voice Coil Diameter
39 mm
26 mm
Air Load Mass In IEC Baffle
1.69 g
-
Voice Coil Height
12 mm
1.6 mm
Suspension Compliance
0.17mm/N
-
Air Gap Height
6 mm
2.0 mm
Suspension Mechanical Resistance 4.95 Ns/m
-
Linear Coil Travel (p-p)
6 mm
Maximum Coil Travel (p-p)
12 mm
Magnetic Gap Flux Density
1.1 T
Magnet Weight
0.95 kg
Total Weight
1.44 kg
RoHS compliant product
0.4 mm
2
7 cm2
Effective Piston Area
131 cm
VAS
3.7 Litres
-
QMS
2.16
-
-
QES
0.86
-
-
QTS
0.62
-
1.56 T
www.seas.no
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising