user guide - Woodbrass
10016 - September 2013 Version 1.12
USER GUIDE
1 6 X 3 0 W T R I C O B L E D S F L O O D P R O J E C T O R W I T H L C D D I S P L AY
PIX44 - 16x30W TRI COB LEDs Flood projector with LCD display
English
1 - Safety information
Important safety information
This unit is intended for indoor use only. Do not use it in a wet,
or extremely cold/hot locations. Failure to follow these safety instructions could result in fire, electric shock, injury, or damage to
this product or other property.
This product contains non-isolated electrical components. Do not
undertake any maintenance operation when it is switched on as
it may result in electric shock.
Any maintenance procedure must be performed by a CONTEST
authorised technical service. Basic cleaning operations must thoroughly follow our safety instructions.
WARNING : This unit contains no user-serviceable parts. Do not open the
housing or attempt any maintenance by yourself. In the unlikely even your unit
may require service, please contact your nearest dealer.
Risk of electric shock
Warning
This product is equipped with Class 2 LEDs.
Please avoid looking directly at the beam as it may
cause severe eye injuries.
In order to avoid any electrical malfunction,
please do not use any multi-socket, power cord
extension or connecting system without making
sure they are perfectly isolated and present no
defect.e.
Recycling your device
• As HITMUSIC is really involved in the environmental cause, we only commercialise clean, ROHS compliant products.
• When this product reaches its end of life, take it to a collection point designated by local authorities. The separate collection and recycling of your
product at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the
environment.
Symbols used
This symbol signals an important safety
precaution.
The CAUTION symbol signals a risk of product deterioration.
The WARNING symbol signals a risk to the user’s physical integrity.
The product may also be damaged.
Note : The legislation requires that every device set up in a public space features a double
fixation bracket. This security system must hold 10 times the weight of the device.
Page 2
PIX44 - 16x30W TRI COB LEDs Flood projector with LCD display
English
Instructions and recommendations
1 - Please read carefully :
We strongly recommend to read carefully and understand
the safety instructions before attempting to operate this unit.
2 - Please keep this manual :
We strongly recommend to keep this manual with the unit for
future reference.
3 - Operate carefully this product :
We strongly recommend to take into consideration every
safety instruction.
4 - Follow the instructions:
Please carefully follow each safety instruction to avoid any
physical harm or property damage.
5 - Avoid water and wet locations :
Do not use this product in rain, or near washbasins or other
wet locations.
6 - Installation :
We strongly encourage you to only use a
fixation system or support recommended by
the manufacturer or supplied with this product.
Carefully follow the installation instructions and
use the adequate tools.
Always ensure this unit is firmly fixed to avoid
vibration and slipping while operating as it may result in
physical injury.
7 - Ceiling or wall installation :
Please contact your local dealer before attempting any ceiling
or wall installation.
8 - Ventilation :
The cooling vents ensure a safe use of this product, and avoid
any overheating risk.
Do not obstruct or cover these vents as it may result in
overheating and potential physical injury or product damage.
This product should never been operated in a closed nonventilated area such as a flight case or a rack, unless cooling
vents are provided for the purpose .
12 - Cleaning precautions :
Unplug the product before attempting any cleaning
operation. This product should be cleaned only with
accessories recommended by the manufacturer.
Use a damp cloth to clean the surface. Do not
wash this product.
13 - Long periods of non use :
Disconnect the unit’s main power during long
periods of non use.
14 - Liquids or objects penetration :
Do not let any object penetrate this product as it
may result in electric shock or fire.
Never spill any liquid on this product as it may
infiltrate the electronic components and result in
electric shock or fire.
15 - This product should be serviced when :
Please contact the qualified service personnel if :
- The power cord or the plug has been damaged.
- Objects have fallen or liquid has been spilled into
the appliance.
- The appliance has been exposed to rain or water.
- The product does not appear to operate normally.
- The product has been damaged.
16 - Inspection/maintenance :
Please do not attempt any inspection or maintenance by
yourself. Refer all servicing to qualified personnel.
17 - Operating environment :
Ambient temperature and humidity: +5 - +35°C,
relative humidity must be less than 85% (when
cooling vents are not obstructed).
Do not operate this product in a non-ventilated,
very humid or warm place..
9 - Heat exposure :
Sustained contact or proximity with warm surfaces may cause
overheating and product damages. Please keep this product
away from any heat source such as a heaters, amplifiers, hot
plates, etc...
10 - Electric power supply :
This product can only be operated according to
a very specific voltage. These information are
specified on the label located at the rear of the
product.
11 - Power cords protection:
Power-supply cords should be routed so that they
are not likely to be walked on or pinched by items
placed upon or against them, paying particular
attention to cords at lugs, convenience receptacles
and the point where they exit from the fixture.
Page 3
English
PIX44 - 16x30W TRI COB LEDs Flood projector with LCD display
2 - Main characteristics
Here is a unique projector.
It features 16x30W COB (Chips On Board) LEDs, and provides a exceptional light output for a very slow power
consumption, and extended lifespan.
• Features:
- Black metal housing
- Suspension bracket
- Rear display
- Internal thermal protection
• Package contents:
The package must contain the following products:
› A projector
› A user guide
› An IEC 2 pole + earth power cord
• Functions:
› Drop-down display to:
- Configure the DMX address
- Choose the number of channels 2, 3, 4, 5, 6, 48
or 51 channels
- Step/Fade programs selection
- Choose the preset colours
› Slave mode
› Multi-slave mode to create sequences with multiple
devices
› Music-sensitive mode with mic sensitivity settings
3 - Technical specifications
• 16 COB LEDs
• 30W tricolour LEDs
• Beamwidth: 60°
• 3-pin and 5-pin XLR DMX input/output
• PowerCON® power input/output (daisy chain up to 5 projectors)
• Power consumption: 500W
• Power supply: 100/240V, AC - 50/60Hz
• Thermo-regulated cooling system
• Dimensions : 345 x 365 x 180 mm
• Net weight: 8.18 Kg
Page 4
PIX44 - 16x30W TRI COB LEDs Flood projector with LCD display
English
4 - Description
7
2
1
3
4
5
1
Power input/output
Allows you to connect the projector to an electrical
outlet and to link several projectors together.
These are PowerCON Neutrik® sockets.
5
2
Main fuse
If need to replace the fuse, please make sure the
new fuse has exactly the same characteristics as the
original one.
6
3 Menu buttons
MODE button
Allows you to access menus and select a
function.
ENTER button
Allows you to configure the parameters of the
functions chosen with the MODE button.
UP and DOWN buttons
Allow you to increase/decrease the adjustable
values or browse the submenus.
4
6
DMX output
3-pin male XLR plug hardwired as follows :
- Mass: 1
- Negative signal: 2
- Positive signal: 3
DMX input
3-pin female XLR plug hardwired as follows :
- Mass: 1
- Negative signal: 2
- Positive signal: 3
7
Display
This intuitive display allows you to configure your
projector. Please refer to the next paragraphs for
more details about the projector configuration.
Mini USB socket
Allows you to update the internal software.
Note : this update can only be performed by our
staff.
Do not connect any device to this plug. The update
requires a specific equipment.
Page 5
PIX44 - 16x30W TRI COB LEDs Flood projector with LCD display
English
5 -Internal menu
5.1 - Submenus and functions
MODE
MACRO MODE
PATTERN MODE
PATTERNS
INVERSION
AUTOMATIC
MODE
MUSIC-SENSITIVE
MODE
MULTI-SLAVE
MODE
NO DMX MODE
ENTER
UP and DOWN
Action
Fixed colours selection and sequences.
1: Selection
1: Macros selection In this mode the LEDs change their colour at the same time.
2: Sequences
2: Speed settings
The speed settings are only available for sequences.
speed
Please refer to the next paragraph for more details about macros.
1 : Selection
2:
Sequences
speed
1: Patterns selection
2: Speed settings
Activates the
function
ON or OFF
Speed
settings
Speed from 1 - 99
Mic sensitivity
settings
Sensitivity from
1 - 99
1 : Activates
the function
2 : Number
of slaves
selection
Configures
the projector
reaction
when no
DMX signal is
detected
--------
Patterns selection.
In this mode the LEDs act independently, like a chaser.
This function reverses the patterns.
Patterns are launched one after another at the speed selected via the
SP submenu.
Patterns are launched one after another and are music-sensitive.
The SENS determines the mic sensitivity.
Allows you to spread patterns accross several PIX44 units (up to 10
max).
Please refer to next page for more details about this function.
Close : The projector blacks-out
Hold : The projector holds onto the last information received
Auto : Switches to Auto mode
Audio : Switches to music-sensitive mode
SLAVE MODE
Activates the
slave mode
The unit is in slave mode and awaits a signal from another PIX44.
2 channels : Macros, Patterns and dimmer
3 channels : R, G and B
DMX ADDRESS
& NUMBER OF
CHANNELS
(the display flashes
in case of signal
interruption)
Page 6
1: DMX
address
2: Number of
channels
4 channels : R, G, B and Dimmer/Strobe
5 channels : R, G, B, Dimmer and Strobe
6 channels : R, G, B, Dimmer, Strobe/Speed and Macros/Patterns
48 channels : Each colour is controlled separately for each LED
51 channels : Each colour is controlled separately for each LED,
Dimmer, Strobe/Speed and Macros/Patterns
PIX44 - 16x30W TRI COB LEDs Flood projector with LCD display
English
5.2 - Macros and colours details
Red
Cool white
Orange
Warm white
Yellow
Colour macro 1: step, with speed
settings
Colour macro 2: fade, with speed
settings
Colour macro 3: fade, with speed
settings
Colour macro 4: fade, with speed
settings
Colour macro 5: fade, with speed
settings
Green
Cyan
Blue
Pink
Magenta
5.3 - Macros behaviour
Macro 1
10 fixed colours sequencing (Red, Orange, Yellow, Green, Cyan, Blue, Magenta, Pink, Cool
white and Warm white). Step transitions.
Macro 2
10 fixed colours sequencing (Red, Orange, Yellow, Green, Cyan, Blue, Magenta, Pink, Cool
white and Warm white). Crossfade transitions.
Macro 3
Non-stop crossfade from Red to Orange
Macro 4
Non-stop crossfade from Green to Blue
Macro 5
Non-stop crossfade from Warm white to Cool white
5.4 - MULTI MS mode configuration
The MULTI MS mode allows you to spread patterns accross several units.
For instance:
1 - If you have 2 units:
a - For the first unit, access the MULTI MS menu and select M/S : YES and SL2
b - For the second unit, access the MULTI MS menu and select M/S : NO and SL1
c - Set the first unit in PATTERN mode and configure the speed.
2 - If you have 3 units:
a - For the first unit, access the MULTI MS menu and select M/S : YES and SL3
b - For the second unit, access the MULTI MS menu and select M/S : NO and SL2
c - For the third unit, access the MULTI MS menu and select M/S : NO and SL1
d - Set the first unit in PATTERN mode and configure the speed.
In brief:
- The master unit has the highest SL number (SL1, SL2, SL3, ...etc).
- The unit with the highest SL number must be switched in PATTERN mode to launch an animation.
- Please note: Non-master units must NOT be put in SLAVE mode.
Page 7
PIX44 - 16x30W TRI COB LEDs Flood projector with LCD display
English
6 - The various DMX modes
6.1 - 2-channel mode
CHANNEL 1
DMX values
000 - 010
011 - 020
021 - 030
031 - 040
041 - 051
052 - 061
062 - 071
072 - 081
082 - 092
093 - 102
103 - 112
113 - 122
123 - 133
134 - 143
144 - 153
154 - 163
164 - 174
175 - 184
185 - 194
195 - 204
205 - 215
216 - 225
226 - 235
236 - 245
246 - 255
Effect
Off
Red
Orange
Yellow
Green
Cyan
Blue
Purple
Magenta
Cool white (6000°K)
Warm white (3200°K)
Colour macro 1
Colour macro 2
Colour macro 3
Colour macro 4
Colour macro 5
Pattern 1
Pattern 2
Pattern 3
Pattern 4
Pattern 5
Pattern 6
Pattern 7
Pattern 8
Auto sequencing
CHANNEL 2
DMX values
Effect
000 - 255
If channel 1 between
000 and 112
Dimmer from 0 - 100%
000 - 245
If channel 1 between
113 and 245
Increasing speed
246 - 255
Music-sensitive mode
Note :
- The colour macros are described in paragraph 5.3.
- The Auto sequencing includes the 10 preset colours, macros and patterns in a loop.
6.2 - 3-channel mode
DMX values
CHANNEL 1
CHANNEL 2
CHANNEL 3
000 - 255
000 - 255
000 - 255
Effect
Red from 0 - 100%
Green from 0 - 100%
Blue from 0 - 100%
6.3 - 4-channel mode
DMX values
000 - 255
Red from 0 - 100%
CHANNEL 2
000 - 255
Green from 0 - 100%
CHANNEL 3
000 - 255
Blue from 0 - 100%
000 - 189
Main dimmer from 0 - 100%
190 - 250
Slow to fast strobe
251 - 255
Full power
CHANNEL 4
Page 8
Effect
CHANNEL 1
PIX44 - 16x30W TRI COB LEDs Flood projector with LCD display
English
6.4 - 5-channel mode
DMX value
Effect
CHANNEL 1
000 - 255
Red from 0 - 100%
CHANNEL 2
000 - 255
Green from 0 - 100%
CHANNEL 3
000 - 255
Blue from 0 - 100%
CHANNEL 4
000 - 255
Main dimmer from 0 - 100%
000 - 015
No function
016 - 255
Slow to fast strobe
CHANNEL 5
6.5 - 6-channel mode
CH 3
CH 2
CH 1
Strobe
Blue
Green
Red
011 - 020
021 - 030
031 - 040
041 - 051
052 - 061
062 - 071
072 - 081
082 - 092
093 - 102
103 - 112
113 - 122
123 - 133
134- 143
144 - 153
154 - 163
164 - 174
175 - 184
185 - 194
195 - 204
205 - 215
216 - 225
226 - 235
236 - 245
Red
Orange
Yellow
Green
Cyan
Blue
Purple
Magenta
Cool white (6000°K)
Warm white (3000°K)
Macro 1
Macro 2
Macro 3
Macro 4
Macro 5
Pattern 1
Pattern 2
Pattern 3
Pattern 4
Pattern 5
Pattern 6
Pattern 7
Pattern 8
246 - 255
Auto sequencing
Strobe (016- 255)
From slow to fast
No function
If channel 6 between 000 and 010
(000 - 255)
From 0 - 100%
Between
000 and
015
(000 - 255)
From 0 - 100%
No function
CH 4
Dimmer, Speed,
Music-sensitive
(000 - 255)
From 0 - 100%
000 - 010
CH 5
If channel 6 between 000 and 112
Main dimmer
(000 - 255)
From 0 - 100%
DMX value
Colours, Macros,
Patterns
If channel 6 between 113 and 245
Macros and patterns speed (000
- 245)
From slow to fast
CH 6
Music-sensitive
mode
Note :
- The colour macros are described in paragraph 5.3.
- The Auto sequencing includes the 10 preset colours, macros and patterns in a loop.
Page 9
PIX44 - 16x30W TRI COB LEDs Flood projector with LCD display
English
6.6 - 48-channel mode
Channel
DMX value
Function
Channel 1
000 - 255
LED 1 Red from 0 - 100%
Channel 2
000 - 255
LED 1 Green from 0 - 100%
Channel 3
000 - 255
LED 1 Blue from 0 - 100%
---
---
---
Channel 46
000 - 255
LED 16 Red from 0 - 100%
Channel 47
000 - 255
LED 16 Green from 0 - 100%
Channel 48
000 - 255
LED 16 Blue from 0 - 100%
6.7 - 51-channel mode
Red
Orange
Yellow
Green
Cyan
Blue
Purple
Magenta
Cool white (6000°K)
Warm white (3000°K)
Macro 1
Macro 2
Macro 3
Macro 4
Macro 5
Pattern 1
Pattern 2
Pattern 3
Pattern 4
Pattern 5
Pattern 6
Pattern 7
Pattern 8
246 - 255
Auto sequencing
Between
000 and
015 No
Page 10
Strobe (016 - 255)
From slow to fast
function
Music-sensitive
mode
Blue
Green
Red
If channel 51 between 000 and
010
(000 - 255)
From 0 - 100%
011 - 020
021 - 030
031 - 040
041 - 051
052 - 061
062 - 071
072 - 081
082 - 092
093 - 102
103 - 112
113 - 122
123 - 133
134- 143
144 - 153
154 - 163
164 - 174
175 - 184
185 - 194
195 - 204
205 - 215
216 - 225
226 - 235
236 - 245
Strobe
CHANNELS 1 to 48
(000 - 255)
From 0 - 100%
No function
CHANNEL 49
Dimmer, Speed,
Music-sensitive
(000 - 255)
From 0 - 100%
000 - 010
CHAN. 50
If channel 51 between 000 and 112
Dimmer général
(000 - 255)
From 0 - 100%
DMX values
Colours, Macros,
Patterns
If channel 51 between 113 and 245
Macros and patterns speed(000
- 245)
From slow to fast
CHANNEL 51
PIX44 - 16x30W TRI COB LEDs Flood projector with LCD display
English
Page 11
Because CONTEST® takes the utmost care in its products to make sure you only get the best possible quality, our products are
subjects to modifications without prior notice. That is why technical specifications and the products physical configuration might differ
from the illustrations.
Make sure you get the latest news and updates about the CONTEST® products on www.contest-lighting.com
CONTEST® is a trademark of HITMUSIC S.A. - Zone Cahors sud - 46230 FONTANES - FRANCE
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising