LUCIA 240/2M Data Sheet
Technical Data
LUCIA: Localized Utility Compact Intelligent Amplification
LUCIA 240/2M
▸▸ Maximum output power across range of loads – 2 x 120 W
into 8, 4 or 2 ohms
▸▸ Comprehensive DSP features – Per channel presets for
high-pass filter, parametric EQ, multi-band compressor, and
look-ahead limiter
▸▸ Configuration software – Windows and Mac software wizard
for initial set-up, and advanced editor for preset configuration
(connection via USB)
▸▸ Efficient Class D amplifier – Patented design for low distortion
and minimal heat dissipation
▸▸ Automatic Dynamic Loudness ContouringTM – DSP automatically
adapts to optimize performance at any output level
▸▸ GPIO – Remote control (e.g. wall panel) for channel switching,
level control and integration with paging systems
▸▸ Enhanced Bass ProfileTM – DSP optimization for extended LF
response with small loudspeakers
▸▸ Compact form factor – Half-rack, 1U chassis and supplied
bracket for discreet on-wall mounting (e.g. behind display
screens)
▸▸ Optimized presets – Available for specific loudspeaker models1
▸▸ Auto Load SenseTM – Proprietary auto-set VPL™ (Voltage Peak
Limiter) for optimum performance with any connected load
▸▸ 4 x 4 mix matrix – Route input signals internally to amplifier or to
line-level outputs
Great sound, flexibility and ease of use
Lab.gruppen’s innovative LUCIA (Localized Utility Compact
Intelligent Amplification) brings superior audio performance and
extraordinary flexibility to a decentralized approach in AV systems
design. Power, processing, control and I/O are conveniently placed
exactly where they are needed. In many AV applications requiring
consistent, high quality audio output, LUCIA offers a logical, costefficient and scalable solution that eliminates the complications and
added expense of a centralized equipment room for amplification,
matrixing and processing. All LUCIA amplifiers incorporate a digital,
firmware-controlled front end coupled to a robust, durable and
highly efficient Lab.gruppen output stage, all of which make it the
best sounding compact amplifier in its category.
Fast installation, reliable operation
LUCIA amplifiers install quickly and easily, with the supplied
wall-mount bracket enabling discreet on-wall placement behind
video displays. All connections are via Euroblock screw terminals,
and level setting is available on front-panel potentiometers. An
advanced protection scheme protects the amplifier and connected
loudspeakers from potential damage caused by clipping, thermal
overload, or extreme low line voltage.
▸▸ Fail-safe operation – Comprehensive short circuit, thermal, and
under-voltage protection
▸▸ Universal power supply – Operates at 100 - 240 V AC (50 or
60 Hz)
▸▸ ENERGY STAR® qualified2 – Conforms to latest specification
energy efficiency standards
Integrated mix-matrix and DSP
A versatile 4 x 4 mix-matrix and comprehensive DSP features
eliminate the need for external mixers and processors in many
applications, saving time and money. A software wizard facilitates fast
set-up, while the PC editor allows offline configuration of common
presets that can be quickly downloaded to multiple units via USB.
Green credentials
LUCIA amplifiers are ENERGY STAR qualified2, making them an ideal
choice for installation in projects seeking energy efficient certifications.
The amplifiers automatically enter standby mode after a 20 minute
period with no signal input, consuming less than 1 watt. Automatic
power-up occurs within two seconds after an input signal is sensed.
1
Presets available at launch for selected Tannoy loudspeakers including the industry leading
CMS Series in-ceiling systems.
2
Performance meets all criteria; certification pending.
Applications
• Retail outlets
• Bars & restaurants
• Entertainment venues
• Corporate board rooms
•Classrooms
WWW.LABGRUPPEN.COM
• Multimedia spaces
• Hotel reception/lobbies
• Museums & galleries
• Small corporate event
spaces
Specifications LUCIA 240/2M
General
Number of powered channels
Total output all channels driven
Max output voltage per channel 1)
Max. output current per channel
2
240 W
43.8 V peak
7.8 Arms
Max. Output Power (all ch.’s driven)
2 ohms
4 ohms
8 ohms
16 ohms
120 W
120 W
120 W
60 W
Performance
THD 20 Hz - 20 kHz at 1 W into 8 ohms
THD at 1 kHz and 1 dB below clipping
Signal To noise ratio into 8 ohms
Channel separation (Crosstalk) at 1 kHz
Frequency response
Input impedance
Input common mode rejection, CMR
<0.3%
<0.2%
>101 dBA
>60 dB
5 Hz - 22 kHz
10 kOhm
40 dB
Gain, Sensitivity and Limiters
VPL for 16 ohm mode
VPL for 8 ohm mode
VPL for 4 ohm mode
VPL for 2 ohm mode
Sensitivity, balanced input
Sensitivity, RCA input
Input headroom for clip, balanced 2)
Input headroom for clip, RCA 2)
44 V
44 V
31 V
22 V
4 dBu / 1.23 Vrms
-2 dBu / 0.62 Vrms
12 dBu / 3.09 Vrms
6 dBu / 1.55 Vrms
Connectors and switches
Input connectors (per ch.)
Input connectors (ch 1 & 2)
Output connectors (per ch.)
GPI (power control input) 3)
GPO (power state output) 3)
USB
Cooling
Auto mode
Level adjustment (per channel) 3)
Matrix model features
Inputs processing block 4)
Mix-matrix routing block 4)
Outputs processing block 4)
3-pin detachable screw terminals, electronically balanced
Unbalanced RCA type
2-pin detachable screw terminals
2 channels of voltage sense type. 4 pins in a detachable screw terminal. Default for gain.
Contact closure type, 2 pins in a detachable screw terminal
Default for external monitoring of fault/protection/power off
For firmware update and configuration for the matrix models
One fan, no filter required, front-to-rear airflow, temperature controlled speed
Can stay off if the sustained power average stays below 2 x 6 W and the surrounding
temperature is below 25 degrees C
The power state is controlled automatically with the audio signal
Front panel potentiometer, detented from -inf to 0 dB
Two line level outputs 5)
Latency from any input to any output
Default with 4 parametric EQ for each of the 4 input channels
4 in - 4 out mix-matrix controllable from GPI
High pass filter
Output EQ
Output look ahead limiter
ADLC (Adaptive ISO 226 compensation)
Each capable of driving 6 LUCIA units in parallel
9.15 ms
Power
Nominal voltage
Operating voltage
Standby consumption
Mains connector
100 - 240 VAC
85 - 265 VAC
<1 W
IEC inlet
Dimensions
Weight
Finish
Approvals
Warranty
W: 216 mm (8.5”), H: 44 mm (1.7”), D: 280 mm (11”)
1.9 kg (4.2 lbs.)
Black aluminum front and black steel chassis
CE, CSA, CCC, PSE, FCC, ENERGY STAR
3 years, components and factory workmanship. See full warranty statement.
Note 1): Into 8 ohms and higher
Note 2): An analog soft limit will be engaged on the input above this level to reduce the clip distortion
Note 3): Can be configured for different functionality via USB
Note 4): DSP settings determined by settings downloaded from the Application Browser software; not configurable on the unit itself
Note 5): Noise levels typically allow daisy chaining of 3 LUCIA amplifiers without issues
All specifications are subject to change without notice.
WWW.LABGRUPPEN.COM
Item no. TDS-LUCIA2402M_V1.2 - 14.04.2014
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising