Sensor Data Sheets Revisions

Sensor Data Sheets Revisions
IS3000 and DT8000 Series
IS3035, IS3050, DT8035 AND DT8050
WIRED PIR AND DUAL TEC® MOTION DETECTORS
Designed with the installer in mind, these high performance
small form factor motion detectors offer a trouble-free, out of
the box experience to simplify the install process and reduce
install time. With the passive infrared IS3035 and IS3050 and
DUAL TEC DT8035 and DT8050, optimum performance is
achieved using custom developed extended range Fresnel
optics, look down, cover and wall tamper, and selectable pet
immunity. Leading edge sensing technologies and a wide
range of models to suit the requirements of most applications,
Honeywell’s family of IS3000 and DT8000 motion detectors
will maximize intruder detection while diminishing false alarms.
FEATURES
• Sleek,
Sturdy Housing
The sleek, sturdy housing blends with
any residential or commercial interior
and is constructed of ABS plastic for
superior shock and impact protection.
It contains a convenient wiring channel,
knockouts for mounting and wiring,
and easy access to terminals. Mounting
screws are located in the rear cover—
enabling easier installation.
•W
all-to-Wall Coverage
Wide and long detection coverage with
look-down zone for coverage range
protection that exceeds similar products
in the market.
• Sealed
Optics and Electronics
The optics and electronics are
assembled into the front enclosure and
sealed with a protective cover to prevent
damage during installation. The sealed
optical chamber also prevents drafts
and insects from affecting the detector.
• Advanced DualCore Signal
Processing (DUAL TEC)
DualCore signal processing
analyzes PIR and microwave
signals through the microcontroller.
It supports a multitude of advanced
functions, including concurrent
diagnostics, digital fluorescent
light interference filter, digital
adaptive microwave threshold,
adaptive baselines and bidirectional
temperature compensation.
• Integrated
Screw Retention Features
To mount the detector on the wall,
the installer will insert the screw in the
integrated mounting feature where it will
be automatically held in place, making
mounting the detector easy and quick.
• Superior
Detection and
False Alarm Immunity
The IS3000 and DT8000 detectors
provide superior protection against
false alarms without sacrificing
catch performance.
• Uniform
Sensitivity Optics
The custom designed Fresnel lens
provides the same sensitivity for human
targets at the edge of the pattern as
exists directly in front of the detector,
giving these detectors consistent
coverage throughout the protected area.
Shorter precision focal lengths mean
superior optics and detection.
• Pet‑friendly Selectivity
Installers can turn pet immunity on or
off with the flip of a DIP switch. When
pet immunity is enabled, the detector
can distinguish between signals
caused by humans and signals caused
by pets up to 100lbs.
•S
electable Look Down
Provides better coverage up close with
multiple zones in the look-down area.
Look down is switch selectable.
• PIR
White Light Immunity
A patented black bug guard reduces
false alarms by providing 6,500 lux of
white light immunity. This helps reduce
false alarm problems caused by lights,
flashlights or reflective objects.
•F
lashlight Walk Test
Reduces installation time as the
walk test can be enabled by simply
waving a flashlight at the detector.
Automatically times out.
•F
lexible Mountings
The IS3000 and DT8000 motion
detectors mount on walls or in corners,
with heights from 6'9" - 8'9"
(2.1 m - 2.7 m). The IS3000 and
DT8000 family works with the SMB10
family of swivel brackets.
IS3000 and DT8000 Series
IS3035 AND DT8035
WIRED PIR AND DUAL TEC® MOTION DETECTORS
Specifications
IS3035 (PIR)
DT8035 (DUAL TEC)
Range
40' x 56'/12 m x 17 m
40' x 56'/12 m x 17 m
Power
9.0 - 15 VDC; 11 mA typical, 13 mA maximum;
AC Ripple: 3 V peak-to-peak at nominal 12 VDC
9.0 - 15 VDC; 15 mA typical, 17 mA maximum;
AC Ripple: 3 V peak-to-peak at nominal 12 VDC
Alarm Relay
Energized Form A; 30 mA, 25 VDC,
22 Ohms resistance maximum.
Alarm Relay Duration: 3 seconds
Energized Form A; 30 mA, 25 VDC,
22 Ohms resistance maximum.
Alarm Relay Duration: 3 seconds
Tampers
Cover & Wall; (NC with cover installed) Form A;
30 mA, 25 VDC
Cover & Wall; (NC with cover installed) Form A;
30 mA, 25 VDC
Microwave Frequency
-
10.525 GHz
RFI Immunity
20V/m 10-1000 MHz, 15V/m 1000-2700 MHz
20V/m 10-1000 MHz, 15V/m 1000-2700 MHz
PIR White Light Immunity
6,500 Lux typical
6,500 Lux typical
Fluorescent Light Filter
-
50 Hz/60 Hz
Operating Temperature
14°F to 131°F/-10°C to 55°C
14°F to 131°F/-10°C to 55°C
Relative Humidity
5 to 93%; non-condensing
5 to 93%; non-condensing
Temperature Compensation
Advanced Dual Slope
Advanced Dual Slope
Dimensions
3.86" H x 2.24" W x 1.71" D/
9.8 cm H x 5.7 cm W x 4.35 cm D
3.86" H x 2.24" W x 1.71" D/
9.8 cm H x 5.7 cm W x 4.35 cm D
Weight
3 oz/85 g (net weight)
3.6 oz/102 g (net weight)
Pet Immunity
≤ 80 lbs./36kg
≤ 100 lbs./45kg
IS3035/DT8035
DETECTION PATTERNS
IS3035/DT8035
DETECTION
PATTERNS
Top
View
33ft
(10m)
27ft
(8m)
20ft
(6m)
Top View
13ft
PLAN VIEW
(4m)
ALL ZONES
7ft
PLAN VIEW
ALL ZONES
(2m)
0ft
(0m)
7ft
(2m)
13ft
(4m)
20ft
(6m)
27ft
(8m)
33ft
(10m)
27ft
(8m)
20ft
(6m)
13ft
(4m)
7ft
(2m)
0ft
(0m)
7ft
(2m)
13ft
(4m)
20ft
(6m)
27ft
(8m)
33ft
(10m) 0ft 7ft 13ft 20ft 27ft 33ft 40ft
(0m) (2m) (4m) (6m) (8m) (10m)(12m)
33ft
(10m) 0ft 7ft 13ft 20ft 27ft 33ft 40ft
(0m) (2m) (4m) (6m) (8m) (10m)(12m)
Side View
Side View
7ft 13ft 20ft 27ft 33ft 40ft
(2m) (4m) (6m) (8m) (10m)(12m)
7.5ft
(2.3m)
7ft 13ft 20ft 27ft 33ft 40ft
7.5ft 0ft(2m) (4m) (6m) (8m) (10m)(12m)
(2.3m) (0m)
0ft
(0m)
A
A
B
B
C
C
Zones
A
2 Look-down
B
18 Lower
C
46 Intermediate
D
36 Long
D
D
IS3000 and DT8000 Series
IS3050 AND DT8050
WIRED PIR AND DUAL TEC® MOTION DETECTORS
Specifications
IS3050 (PIR)
DT8050 (DUAL TEC)
Range
53' x 72'/16 m x 22 m
53' x 72'/16 m x 22 m
Power
9.0 - 15 VDC; 11 mA typical, 13 mA maximum;
AC Ripple: 3 V peak-to-peak at nominal 12 VDC
9.0 - 15 VDC; 15 mA typical, 17 mA maximum;
AC Ripple: 3 V peak-to-peak at nominal 12 VDC
Alarm Relay
Energized Form A; 30 mA, 25 VDC,
22 Ohms resistance maximum.
Alarm Relay Duration: 3 seconds
Energized Form A; 30 mA, 25 VDC,
22 Ohms resistance maximum.
Alarm Relay Duration: 3 seconds
Tampers
Cover & Wall; (NC with cover installed) Form A;
30 mA, 25 VDC
Cover & Wall; (NC with cover installed) Form A;
30 mA, 25 VDC
Microwave Frequency
-
10.525 GHz
RFI Immunity
20V/m 10-1000 MHz, 15V/m 1000-2700 MHz
20V/m 10-1000 MHz, 15V/m 1000-2700 MHz
PIR White Light Immunity
6,500 Lux typical
6,500 Lux typical
Fluorescent Light Filter
-
50 Hz/60 Hz
Operating Temperature
14°F to 131°F/-10°C to 55°C
14°F to 131°F/-10°C to 55°C
Relative Humidity
5 to 93%; non-condensing
5 to 93%; non-condensing
Temperature Compensation
Advanced Dual Slope
Advanced Dual Slope
Dimensions
3.86" H x 2.24" W x 1.71" D/
9.8 cm H x 5.7 cm W x 4.35 cm D
3.86" H x 2.24" W x 1.71" D/
9.8 cm H x 5.7 cm W x 4.35 cm D
Weight
3 oz/85 g (net weight)
3.6 oz/102 g (net weight)
IS3050/DT8050
DETECTION PATTERNS
8050
ON PATTERNS
Top View
VIEW
ONES
40ft
12 m
33ft
10 m
27ft
8m
20ft
6PLAN
m
VIEW
13ft
ALL ZONES
4m
7ft
2m
0
7ft
2m
13ft
4m
20ft
6m
40ft
12 m
33ft
10 m
27ft
8m
20ft
6m
13ft
4m
7ft
2m
Side View
Side View
13ft 20ft 27ft 33ft 40ft 47ft 53ft
7ft
(2m) (4m) (6m) (8m) (10m)(12m) (14m) (16m)
13ft 20ft 27ft 33ft 40ft 47ft 53ft
7ft
(2m)0ft (4m) (6m) (8m) (10m)(12m) (14m) (16m)
(0m)
B
C
D
A
7.5ft
(2.3m)
0ft
(0m)
A
B
C
D
0
Zones
7ft
2m
13ft
4m
20ft
6m
27ft
8m
33ft
10 m
40ft
12 m 0
7ft 13ft 20ft 27ft 33ft 40ft 46ft 53ft
2 m 4 m 6 m 8 m 10 m 12 m 14 m 16 m
27ft
8m
33ft
10 m
40ft
12 m 0
7.5ft
(2.3m)
7ft 13ft 20ft 27ft 33ft 40ft 46ft 53ft
2 m 4 m 6 m 8 m 10 m 12 m 14 m 16 m
A
2 Look-down
B
18 Lower
C
20 Intermediate
D
54 Long
IS3000 and DT8000 Series
IS3035, IS3050, DT8035 AND DT8050
APPROVAL LISTINGS
• UL 639
• ULC S306-03
• SIA PIR-01-2000
• FCC part 15, Class B verified
• IC ICES-003, Class B verified
ORDERING
IS3035 IS3050
DT8035
DT8050
PIR Motion Detector, 35 foot
PIR Motion Detector, 50 foot
DUAL TEC Motion Detector, 35 foot
DUAL TEC Motion Detector, 50 foot
Accessories*
SMB10
SMB10C
SMB10T
2103
3103
Swivel Mount Bracket (0-000-110-01)
Swivel Mount Ceiling Bracket (0-000-111-01)
Swivel Mount Bracket with Tamper (0-000-155-01)
Riser Rated Cable, Solid 22 AWG, 4 Conductor
Plenum Rated Cable, Solid 22 AWG, 4 Conductor
Note: Honeywell reserves the right to alter the specification of products without prior notice.
*Accessories not evaluated by UL.
For more information:
www.honeywell.com/security
Automation and Control Solutions
Honeywell Security and Fire
2 Corporate Center Dr. Suite 100
P.O. Box 9040
Melville, NY 11747
1.800.323.4576
www.honeywell.com
L/IS3DT8SND/D
July 2016
© 2016 Honeywell International Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising