Product Brochure E Series DX Uninterruptible Power System Reliable Power Protection for Today’s Computing Environments Introducing the E Series DX UPS The E Series DX UPS double-conversion online UPS from Eaton® affordably protects mission-critical applications from downtime, data loss and corruption. The double-conversion architecture incorporates rectifier and inverter stages to completely isolate the output power from all input anomalies. By adapting to a wide range of input voltages, the E Series DX avoids battery usage during minor power fluctuations, saving its capacity for times when utility power is completely lost. Features Product snapshot • Online double-conversion topology assures maximum reliability • Wide input voltage range appropriate for the harshest electrical environments • Standard models for fixed run-time performance • Tested for generator compatibility • Automatic bypass for fault tolerance • Optional SNMP communications provide remote network-based monitoring Power Rating: 1 kVA–20 kVA Voltage: 60 to 138 VAC (low voltage) 80 to 300 VAC (high voltage) • XL models for customized, long run time applications, with fast recharging Frequency: 50/60 Hz (auto-sensing) • Cold start-on-battery power allows portable power • WINPOWER software monitors power conditions • Intuitive front-panel user interface for consistent status indication Technology: High-frequency double-conversion online Internal Automatic Bypass Utility Load Filtering AC to DC Rectifier DC to AC Inverter Input voltage Output voltage Battery Online double-conversion topology Wide input voltage range This topology guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the AC to DC then DC to AC conversion process. The battery is used only as a backup source. DX UPS have a very wide input voltage range of up to 120-300V, optimized to improve compatibility with engine generator sets and reduce the numbers of transfer to battery power. The batteries are used only for the most serious incidents, maximizing available backup time and extending battery life. High performance and reliability DX uses High Frequency technology to bring its users a compact. UPS that delivers perfect sine wave output. Automatic bypass In case of overload or UPS fault, the DX UPS automatically transfers the load to utility AC power. Advanced communications An RS232 port is available for easy connection of the UPS to the server. It may be used for local monitoring. An optional SNMP card is also available for network administration. WINPOWER monitoring software can be used to: • Alert users of a power event or pre-specified condition • Automatically shut down your servers • Remotely supervise and control UPS solutions High-performance battery charger Cold start-on-battery power The DX battery charger: This function ensures trouble-free start-up of your applications even during a utility power outage. • Reduces battery recharge time • Protects the battery against damage caused by deep discharge • Prevents disturbances on the distribution system by correcting the power factor • Avoids propagating faults on the distribution system (back-feed protection) Backup times from five minutes to several hours DX UPS offers a standard backup time of five to eight minutes on full load to protect the applications. XL models allow users to reach several hours of runtime using external batteries. E Series DX Battery Runtime chart LV Model Battery Runtime 1/2 load Battery Runtime Full load HV Model Battery Runtime 1/2 load Battery Runtime Full load 2 1000 1500 3000 6000 10000 1:1 10000 3:1 15000 3:1 20000 3:1 14 min 5 min 14 min 5 min 17.5 min 5 min 23 min 8 min 12 min 5 min External bat External bat External bat External bat External bat External bat 1000 2000 3000 6000 10000 1:1 10000 3:1 15000 3:1 20000 3:1 14 min 7 min 31 min 11 min 16 min >5 min 20 min 8 min 16 min >5 min External bat External bat External bat External bat External bat External bat EATON CORPORATION Eaton E Series DX UPS E Series DX rear panel 1. Output Receptacles 2. Input/Output Terminal Block 3. AC Input 4. Modem Surge Protection 5. Standard RS232 Communication Port 6. Optional SNMP Communication Port 7. Extended Battery Connector (XL models only) High Voltage 2000 VA High Voltage 1000 VA 5 5 5 5 6 High Voltage 15 kVA/20 kVA 6 6 7 6 High Voltage 10000 VA High Voltage 3000 VA 6 5 High Voltage 6000 VA 7 7 5 6 7 7 1 4 1 1 3 2 2 4 4 7 3 3 Low Voltage 10000 VA Low Voltage 6000 VA 5 5 6 5 6 6 Low Voltage 3000 VA Low Voltage 1500 VA Low Voltage 1000 VA 5 2 5 6 6 7 7 7 2 7 7 2 1 4 4 1 1 3 2 3 4 EATON CORPORATION Eaton E Series DX UPS 3 E Series DX UPS technical specifications - HIGH voltage models E Series DX E Series DX 1500 LV/1050 E Series DX E Series DX E Series DX E Series DX E Series DX E Series DX Model Numbers/Watts 1000/700 E Series DX 2000 HV/1400 3000/2100 6000/4200 10000 1:1/7000 10000 3:1/7000 15000 3:1/10500 20000 3:1/14000 Low Volt - Standard Version EDX1000L EDX1500L EDX3000L EDX6000L EDX10KL N/A Low Volt - XL Version N/A EDX1000LXL EDX1500L XL EDX3000L XL EDX6000LXL EDX10KLXL External Battery High Volt - Standard Version EDX1000H EDX2000H EDX3000H EDX6000H EDX10KH N/A High Volt - XL Version EDX20KHXL31 EDX1000HXL EDX2000HXL EDX3000HXL EDX6000HXL EDX10KHXL EDX10KHXL31 EDX15KHXL31 External Battery Technology Online double-conversion IGBT with micro-controller Input / Output 115V (Low-Voltage Models) Nominal Input Voltage 220V (All Models) 380 / 220 Vac three-phase 220V (High Voltage Models) 60V to 138V (Low Voltage Models) 185V +/3% to 266 +/3% (Low Volt) Input Voltage Window 20% / -25% 122V to 300V (High Volt) 122 to 300V (High Voltage Models) 115V (Low-Voltage Models) 240V / 120V (Low Voltage Models) Nominal Output Voltage 220V 220V (High Voltage Models) 220V (High Voltage Models) 115V (Low-Voltage Models) 240V / 120V (Low Voltage Models) Output Voltage on Battery 220V 220V (High Voltage Models) 220V (High Voltage Models) Frequency 50/60Hz, auto-detection Data Line Protection Input / output jacks included for telephone / modem / internet line surge protection N/A Output Receptacles (HV) 4 IEC style (two output cables included) Hardwired 6 NEMA Output Receptacles (LV) 4 NEMA 5-15 style Hardwired 5-15 style IEC 10A style, IEC 16A (IEC 16A Input Connection (HV) Hardwired for use with computer power cable cable included) Standard Model: IEC 10A style, Attached L5-30 Input Connection (LV) for use with computer power cable input plug (cable Hardwired included) XL Model: Hardwired Battery (Standard Model Only) 4 (1500 Low voltage) Battery Quantity 3 8 20 User-Supplied External Battery 8 (2000 High voltage) Five hours to 90% (LV 1K-3K std.) / 7 Hrs to 90% (LV 6K std.) / Charge Capacity User-Supplied External Battery Eight hours to recover 90% capacity (LV 10K and HV models std.) Battery Monitoring Start-On-Battery Battery replacement indicator User-Supplied External Battery Unit can be started without being connected to AC utility power -- allows for portable power source User-Supplied External Battery User Interface Visual Operation on mains, battery, inverter, bypass and load/battery-charging levels Alarm and Controls Audible and Visual Alarms Battery Operation Mode, Low Battery, General Fault, Overload, On Bypass Control Two buttons for On/Off and Alarm Silence Communications / Management Power Management Software WINPOWER power management software, included on CD Connection Type Standard RS232 SNMP Interface Optional SNMP card Environment Operating Temperature 0ºC ~ 40ºC Humidity <95% Noise Level <45dB (LV 1K-1.5K) / <50dB (others) <55dB Standards Certification CE, UL (Low Voltage: 1K-3K only), ISO 9001 Dimensions and weights W x H x D mm Dimensions (HV Models) 145 x 220 x 400 192 x 340 x 460 192 x 340 x 460 260 x 717 x 570 Dimensions (LV Models) 145 x 220 x 400 145 x 200 x 465 192 x 340 x 460 300 x 830 x 655 N/A Weight (HV Models) Kg 14 (XL: 7) 32 (XL: 15) 35.5 (XL: 16) 84 (XL: 35) 93 (XL: 38) (XL: 39) Weight (LV Models) Kg 14 (XL: 7) 18.7 (XL: 9) 35.5 (XL: 16) 132 (XL: 85) 153 (XL: 98) N/A Eaton Corporation Electrical Sector 1111 Superior Avenue Cleveland, OH 44114 USA Eaton.com © 2012 Eaton Corporation All Rights Reserved Printed in USA DX01FXA August 2012 <60dB N/A N/A (XL: 55) N/A N/A For more information on the DX UPS, visit Eaton.com/dxups Eaton is a registered trademark of Eaton Corporation. All other trademarks are property of their respective owners.