SIGNEXT™ - ERM Relay Modules
SIGNEXT™ - ERM
Relay Modules
n
1 form A and 1 form C versions
available.
n
Intended for use with PLC
and DCS 24Vdc digital outputs.
n
Low cost, fit-for purpose design.
n
cULUS listed.
Ordering Information
The SIGNEXT™- ERM relay modules
These modules were designed with
are compact, DIN rail mounted devices
price in mind. The relays are soldered to
intended for use as interposing relays
the PCB, not socket mounted, and the
1 form C, 10A
between PLC/DCS digital outputs and
terminations accept 14AWG maximum
Catalog Number
loads. Two versions are available - a
wires instead of 12AWG. They are
1 form A (normally open), 3A rated
only available with a 24Vdc coil. If you
1 form A, 3A
and 1 form C (SPDT),10A rated. Both
require a low cost, basic relay module
Catalog Number
modules mount on 32mm and 35mm
then the SIGNEXT™- ERM are the ideal
DIN rails.
choice.
10A spy court, markham on l3r 5h6
tel: [905] 475-0220 fax: [905] 475-8796 [eng.] fax: [905] 475-8117 [prod.]
email: [email protected] www.emphatec.com
330235
330236
SPECIFICATIONS
SIGNEXT™ -ERM Relay Modules
Catalog Number:
330235
330236
Coil:
Voltage:
Current:
24Vdc nominal, 18Vdc pick-up, 3.5Vdc drop out
20mA
8.5mA
Contacts:
Voltage:
Current:
Configuration:
30Vdc, 250Vac
10A
3A
1 form C (SPDT)
1 form A (NO)
Contact Material:
silver alloy
General:
Switching Time (approx.)
Operating Temperature:
Width DIN Rail:
Approvals:
15ms operate
5ms release
10ms operate
5ms release
-20° to +50°C
24-14AWG, 0.4Nm torque
CULUS
330235
Listed, E334979
330236
10A spy court, markham on l3r 5h6
tel: [905] 475-0220 fax: [905] 475-8796 [eng.] fax: [905] 475-8117 [prod.]
email: [email protected] www.emphatec.com
Printed in Canada
330235DS
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement