IP intercom communication

IP intercom communication
EN
IP intercom communication
IP intercom communication
DIVUS OPENDOOR is the network based intercom solution from DIVUS. Indoor
and outdoor stations will be connected via LAN cable. During incoming calls you
can see and communicate with your caller immediately and open the door for
him/her.
As internal stations, DIVUS Touchpanel with DIVUS VIDEOPHONE software can be used thanks to VoIP
support. DIVUS OPENDOOR completes the product range of DIVUS perfectly!
The door stations are available in two design variations: The modern look of stainless steel and painted
aluminum frame with a classical variant surface of aluminum. Is it enough to simply hear who is coming?
Or you would like to see who is ringing? We leave you the choice because the stations are available with
or without a camera.
DIVUS OPENDOOR combines maximum freedom of choice and fascinating technology. The various
functional elements such as camera, audio and ring module can be used in combination with mailboxes
or in stand-alone columns that are installed flush with design frames in different colors.
Benefits at a glance:
•
Simple planning, installation and initial startup
•
Security
•
100% digital and therefore future-proof
•
Ideal for small and large systems
•
Available with the internal unit DIVUS TOUCHZONE
MODERN IP INTERCOM, MODULAR OR COMPACT
The transmission of voice and images over Ethernet is increasingly replacing analog and ISDN
based transmission technologies.
The voice communication and the images are converted into digital signals and then transported over the
network in a specific protocol.
DIVUSOPENDOOR IP intercoms support the sustainable SIP protocol. SIP is directly implemented in all
devices with the necessary Ethernet interface. Other adapters or converters are not necessary. This
creates substantial advantages especially in buildings where IT networks and structured cabling are
already installed. Existing IT resources can be used instead of installing new cable networks.
DIVUS OPENDOOR . 3
POSSIBLE COMMUNICATION METHODS
Direct connections
OPENDOOR intercom - PoE switch - IP phone
For the simplest applications, for example in a residence. The intercom directly calls the IP address of an IP phone.
Public SIP provider
OPENDOOR intercom and IP phone are linked through a public SIP
provider free of charge (internet access and at least one DSL connection required). Transfers from SIP to the fixed and mobile phone
network are offered on favorable terms. This makes the OPENDOOR
intercom a worldwide telephone. Even switching functions like
opening the door can be commanded while on the road.
Local SIP server (software solution available as
freeware)
This software can be run on any PC within the network.
IP phone systems
Many phone system manufacturers offer complete IP based systems to which our OPENDOOR solution can be connected directly
to. A compatibility list is available on request.
DIVUS building touch panel
Communicate with the Touch Paneles DIVUS DOMUS, DIVUS HOME,
DIVUS DIVA, DIVUS MIRROR and
DIVUS SUPERIO over the integrated software solution
DIVUS VIDEOPHONE.
DIVUS KNX CONTROL – intelligent systems out of
the box
The OPENDOOR intercom can be integrated directly in the visualization of KNX CONTROL.
Both KNX SERVER and KNX SUPERIO support the speech/videocommunication to OPENDOOR intercom.
THE WALL MOUNT SOLUTIONS WITH IP54 PROTECTION: PERFECT
FOR NEW, FASHIONABLE ENTRANCE AREAS OR FOR THE
UPGRADE OF ALREADY EXISTING ENTRANCE DOORS AND GATES
AUDIO COMPACT
AUDIO COMPACT is a compact external intercom unit with loudspeaker,
microphone, 3 pushbuttons and a 2 line text display with background illumination.
This product is the ideal solution when several internal units shall be called singularly. For such applications the
OPENDOOR intercom has an integrated phone book for up to 100 entries. With the arrow buttons on the
left the single entries of the phonebook can be scrolled up and down while the bell button on the right
starts a call to the selected entry. The actual entry can be read on the clear LCD display.
Further advantages:
•
Fast call processing and clear speech reproduction in good quality, speech priority from the telephone
to the OPENDOOR intercom
•
Door opener can be activated through individual DTMF tones
•
Simple configuration through the built-in web server available in the German, English or Italian
•
Power supply also via PoE (power over Ethernet)
•
Compact wall mount design with internal connections
•
Elegant, massive case of brushed aluminum
TECHNICAL DATA
Handling
LCD-Display with background light
3 buttons, one of them can be used as
central call button
Connections
LAN as RJ45-jack or as push-fit screw
terminal
Push-fit screw terminal for alternative power
supply 24V DC
2 Switching relays (door opener + light)
4 external direct call buttons
Serial interface TTL for flat cable connector
CE mark
EMC 2004/108/EG, EN50081-1 / EN55022
Temperature range
-20°C to +55°C (-20°C after 15 minutes
operating time)
Protection Class
IP54
PoE Supply
Class 2, Endspan or Midspan
Operating Voltage
24 V DC alternatively to the PoE supply
Power
Max. 4 VA
Color/ material
Aluminium housing, brushed and brightly
anodized
Dimensions
99,0 x 198,5 x 38,3 mm
Weight
900 g
DIVUS OPENDOOR . 5
VIDEO COMPACT
VIDEO COMPACT combines the technology of the AUDIO COMPACT unit with a color IP camera in a robust
aluminum case. This IP camera delivers high-quality color pictures which are continuously available on the
network as images or video stream.
Further advantages:
•
2.5 mm lens with a horizontal viewing angle of 83°.
•
6 integrated IR-lights grant a good view also in the dark
•
PoE supply (power over Ethernet): an integrated Ethernet switch with a PoE-input transfers the power
supply also to the color camera. Intercom unit and camera unit can also be supplied and connected
to the network with only one cable. This reduces installation costs and time.
•
The color videos of the built in IP camera can be opened with every standard web browser and also
on several PCs contemporaneously in the network. Additional components are not necessary.
•
Simple configuration through the built in web server
TECHNICAL DATA SAME AS FOR AUDIO COMPACT, EXCEPT OF:
Camera
VGA Color CMOS Image sensor
Lens
2.5 mm f1:2.0 with fixed aperture 2.0,
focusing range 20 cm to infinity, viewing
angle: horizontal approx. 83°,vertical approx.
65°, diagonal approx. 111°
•
•
Image
•
Adjustable resolution up to 640 x 480
(VGA)
Hardware based JPEG compression
with max. 25 images per second with
QVGA
Color image with automatic switching
to monochrome image for night vision
UDP status
Status messages over UDP for pop-up
software
Night vision
Automatic switching to monochrome image
at night
IR-Lights
Activation brightness level adjustable
Power
Max. 9 VA (PoE Class 3)
Dimensions
99,0 x 298 x 38,3 mm
Weight
1.500 g
MODULAR IP INTERCOM FOR IN-WALL MOUNT APPLICATIONS
OR YOUR INDIVIDUAL IDEAS
OPENDOOR SIP
OPENDOOR SIP is a SIP based intercom unit with an integrated loudspeaker, microphone and inputs for
up to 76 external push-buttons. For each push-button a call number can be specified in the integrated
phonebook. Fast call processing and clear speech reproduction in good quality are only two advantages
of this robust intercom unit.
Further advantages:
•
Protection Class IP65 with integrated vandalism protection can be mounted on a front plate directly
from the rear side.
•
Simple configuration through the built-in web server
•
Logic for emergency calls: call repeating, control center call confirmation through DTMF-codes, call
forwarding to alternative phone numbers.
•
Speech priority from the telephone to the OPENDOOR intercom.
•
Supply over PoE (power over Ethernet) possible.
•
Integrated switch with PoE output for the connection of OPENDOOR CAM module
TECHNICAL DATA
Connections
•
•
•
•
•
•
•
2 x Ethernet over RJ45
Push-fit screw terminal
2 switching relays (door opener +light)
Direct call buttons
Central call button
Illumination output (for push-button LED
backlight)
Ribbon cable connector for matrix and keypad
modules
Temperature range
-20°C to +55°C
Protection class
IP65 in conjunction with suitable housings
PoE supply
Class 2, Endspan or Midspan for self-supply
Operating voltage
24 VDC as alternative to PoE supply
Power
Max. 3 VA
Material
Aluminium housing and stainless steel (V4A)
Dimensions
96 x 96 x 43 mm
Weight
Approx. 420 g
DIVUS OPENDOOR . 7
OPENDOOR CAM
OPENDOOR CAM is a compact IP-camera for capturing high-quality pictures and sharing them directly
over Ethernet.
The module consist of an efficient CMOS sensor, a lens, a powerful Processor with network connection
and a PoE supply.
This compact construction allows the realization of custom designs and various device integrations.
Color pictures can be shown contemporaneously on several PCs in the network without any additional
components. With the built in IR lights OPENDOOR CAM is able to operate at night too. Even in total
darkness persons and objects become visible in a good quality by switching to the high contrast
monochrome image mode.
TECHNICAL DATA
Camera
VGA Color CMOS Image Sensor
Lens
2.5 mm f1:2.0 with fixed aperture 2.0, focusing range 20 cm to
infinity, viewing angle: horizontal approx. 83°,vertical approx. 65°,
diagonal approx. 111°
•
•
Image
•
Adjustable resolution up to 640 x 480 (VGA)
Hardware based JPEG compression with max. 25 images per
second with QVGA
Color image with automatic switching to monochrome mode
for night vision
Network
100BaseTX Ethernet interface with built-in web server
Connection
Patch cable, 0.25 m to RJ45 socket included in scope of supply
UDP status
Status messages over UDP for pop-up software
CE mark
EMC tested to EN55011 and EN500082-1
Temperature range
-20°C to +55°C (-20°C after 15 minutes operating time)
Protection class
IP65 in conjunction with suitable housings
PoE supply
Class1, endspan (voltage is fed to the 4 data cables). Midspan
(PoE on free cores) is not available
Operating voltage
24 VDC direct supply (20-36 V) on 2 free wires of the data
cables as an alternative to PoE
Power
Max. 3 VA
Dimensions
96 x 96 x 40.5 mm
Weight
Approx. 260 g
OPENDOOR BELL
OPENDOOR BELL, the push-button module for up to 4 buttons, can be connected directly to the
OPENDOOR SIP module; it is possible to assign a call number to each of the buttons. The OPENDOOR BELL
module is delivered without any bell buttons. Therefore, the bell buttons can be freely chosen according
to the used design. The bell buttons can be connected with the screw-terminal of the OPENDOOR BELL
module through the appropriate soldering lugs. The labeling of the bell buttons is done over strips which
can be accessed from the rear side of the module. A LED background light illuminates the strips as soon
as the OPENDOOR SIP module is registered successfully on the configured SIP-Server. OPENDOOR BELL
is designed for up to 4 bell buttons.
TECHNICAL DATA
Dimensions
64 x 96 x 17 mm
Weight
Approx. 70 g
OPENDOOR TRANSPONDER
With the OD-Transponder, the door station can be used for access control.
•
Transponder reader module for stand-alone access control.
•
Reliable detection of the transponders at distances up to 10 mm.
•
Standalone access control for up to 5000 programmable transponder.
TECHNICAL DATA
Controls
the whole configuration and controlling is done over badges
(transponder)
Connections
•
•
1 open collector output (80V, 15W)
2 internal relay (80V, 1A, 20W), presence
Signaling
•
•
2 multicolor LED (red-green / red-green (yellow))
Acoustic feedback
Power supply
12 - 24VDC, 2 VA
Dimensions
ca. 82 x 82 x 45,6 mm
Weight
345 g
DIVUS OPENDOOR . 9
OPENDOOR PRESENCE
OD-presence functions fully automatically on the basis of electromagnetic waves by Doppler radar. The
integrated light sensor of the OD-Presence also reacts to light, so that it can be adjusted to the desired
lighting conditions.
•
The sensitivity of the person detection is adjustable from 3 to 10 meters.
•
The integrated light sensor can be used as a twilight switch to activate the radar detector.
•
The on-time of the relay is adjustable.
•
The concealed mounting behind glass doors or wooden walls is easy to realize. The radar waves
penetrate these materials.
TECHNICAL DATA
Connections
•
•
•
Operating voltage (8.1V DC to 30V DC)
Relay 24V DC, Imax. = 2A)
Screw terminal
Dimensions
ca. 96 x 96 x 30 mm
Operating voltage
8,1V DC – max. 30V DC
Power consumption
Idle (no movement in front of the module)
Operation (movement before the module)
Environmental conditions
Operating temperature -20 to 55° C
Weight
ca. 170 g
<0.6 W
<0.85 W
OPENDOOR KEYPAD
The OD-Keypad is a module for direct connection to the OD-SIP. Via the OD-Keypad it is possibile to input
free phone numbers and individual PIN codes for example for the door opening. Deposited speed calling
destinations can be selected. The module has anodized buttons with blue backlight. The power supply of
the backlight is supplied by the connected OD-SIP module.
TECHNICAL DATA
Dimensions
Connector to connect to OD-Sip
Dimensions
ca. 96 x 96 x 38 mm
Weight
ca. 345 g
OPENDOOR PUSH
OPENDOOR PUSH, the compact and exclusive bell button, not only fits exactly in the OPENDOOR cover
front plates, but can also be used in own design solutions. The latched changeover contact can be
connected directly to the OPENDOOR SIP or OPENDOOR BELL module using the appropriate soldering
lugs.
TECHNICAL DATA
Color
Brightly stainless steel
Dimensions
General: approx. 20 x 35 mm . Head:
Ø19 x 2 mm . Cut-out: Ø16 mm
Weight
Approx. 20 g
Below you can find a graphic which shows the combination of DIVUS OPENDOOR with different products
of the DIVUS product family:
DIVUS OPENDOOR . 11
OPENDOOR FRAME
OPENDOOR FRAME convinces by a versatile and practical design. Particularly if no pre-built case is
available OPENDOOR FRAME offers a simple and elegant solution for installing the OPENDOOR modules.
According to the used frame type the OPENDOOR FRAME provides places for 1, 2, 3 or 4 OPENDOOR
modules; for in-wall mount applications matching in-wall mount boxes are available.
The OPENDOOR FRAME in single, dual, triple and quad design is available in brushed aluminum or in
coated aluminum, varnished in the desired RAL color.
TECHNICAL DATA
Material
Brushed aluminium
Color
Brightly anodized, alternatively colored in the desired RAL color
Dimensions
•
•
•
•
Single frame 150 x 150 x 7.5 mm
Dual frame 258 x 150 x 7.5 mm
Triple frame 370 x 150 x 7.5 mm
Quad frame 500 x 150 x 7.5 mm
Weight
•
•
•
•
Single frame approx. 300 g
Dual frame approx. 500 g
Triple frame approx. 700 g
Quad frame approx. 900 g
OPENDOOR COVER
OPENDOOR COVER completes the design for the modular OPENDOOR components. The one-piece front
plate covers the single modules with the exact cut-out dimension. The OPENDOOR COVER is available in
3 categories:
•
Single: Cut-out for OD-Keypad, OD-Presence, OD-Transponder and cut-out and mounting preparation
for ekey-fingerprint-module.
•
Dual: upper cut-out for OPENDOOR SIP and lower cut-out for single bell button OPENDOOR PUSHLED or OPENDOOR BELL module with 2 or 4 bell buttons OPENDOOR PUSH.
•
Triple: upper cut-out for OPENDOOR CAM, middle cut-out for OPENDOOR SIP and lower cut-out
for single bell button OPENDOOR PUSH LED or OPENDOOR BELL module with 2 or 4 bell buttons
OPENDOOR PUSH.
All front panel types are available in stainless steel (V4A) or in coated iron, varnished in the desired RAL
color; therefore, also individual and particular customer requests can be satisfied. The OPENDOOR COVER
front plate fits exactly into the appropriate OPENDOOR FRAME, resulting in one smooth surface.
TECHNICAL DATA
Material
Stainless steel (V4A), alternative coated iron
Color
Stainless steel (V4A), alternatively coated iron coated in the desired RAL color
Dimensions
Fitting into OPENDOOR FRAME
Weight
•
•
•
Single front plate approx. 500 g
Double front plate approx. 700 g
Triple front plate approx. 950 g
DIVUS OPENDOOR . 13
THE SECURE IP INTERCOM
OPENDOOR SECURE
OPENDOOR SECURE protects the network from sabotage. By installing an OPENDOOR intercom unit it is
inevitable to bring a network cable outside where the intercom unit is installed. If someone removes the
intercom unit, he can reach the network cable and access the network.
The OPENDOOR SECURE protects the network from such sabotage, by breaking the network connection
and power supply of the intercom unit; OPENDOOR SECURE can be reset only manually, directly on the
device itself.
Through a very compact sabotage contact, OPENDOOR SECURE examines the integrity of the case of the
intercom unit and the connection of the sabotage contact itself. A sabotage is recognized when the case
is opened (contact is directly switched) or when the cable to the sabotage contact is damaged or cut.
TECHNICAL DATA
Operation
•
•
Triple LED status display
Reset button
•
•
2 RJ45 sockets for network input and output
Push-fit screw terminals and LSA+ (parallel) for power
supply
2 sabotage loops and a switched voltage output 24V
DC
Connections
•
CE mark
EN55011, EN50081-1
Temperature range
0°C to +55°C
Protection class
None, open sub-assembly for control cabinet installation
Operating voltage
•
•
•
24 VDC are required
PoE supply is not possible
Supply via a UPS is recommended
Dimensions
•
110 x 85 x 50 mm
Weight
•
120 g
OPENDOOR MODULES
DESCRIPTION
OPENDOOR MODULES
OD-AudioCompact
Open Door Audio Compact
OD-VideoCompact
Open Door Video Compact
OD-BellModule1
Open Door Türklingelmodul 1 / Bell module 1
OD-BellModule2
Open Door Türklingelmodul 2 / Bell module 2
OD-BellModule3
Open Door Türklingelmodul 3 / Bell module 3
OD-BellModule4
Open Door Türklingelmodul 4 / Bell module 4
OD-Cam
Open Door Kamera / Camera
OD-Secure
Open Door Lan-Secure adapter plus sabotage contact
OD-Push
Open Door Push Button
OD-Push LED
Open Door Push Button LED Dual Color for 20 mm holes
OD-Sip
Open Door Sipmaxi Türsprechmodul / Intercom module
OD-Presence
Open Door Präsenzsensor / presence detector
OD-Transp
Open Door Transponderschalter (beinhaltet 1 Programmierbadge und einen Userbadge) / Transponder
(Contains 1 program and 1 user badge)
OD-KIT-Badge
Open Door KIT 5 Stück RFID Badge Gray/Black for OD_Transp
OD-Keypad
Open Door Keypad (kann nur in Verbindung mit OD_SIP eingesetzt werden / Usable only in combination with OD_SIP)
OPENDOOR COVER
ODC-CAM/SIP/BELL2-RAL
Open Door Frontplatte / Cover RAL CAM/SIP/BELL2
ODC-CAM/SIP/BELL2-SA
Open Door Frontplatte / Cover V4A CAM/SIP/BELL2
ODC-CAM/SIP/BELL4-RAL
Open Door Frontplatte / Cover RAL CAM/SIP/BELL4
ODC-CAM/SIP/BELL4-SA
Open Door Frontplatte / Cover V4A CAM/SIP/BELL4
ODC-CAM/SIP/PUSH1-RAL
Open Door Frontplatte / Cover RAL CAM/SIP/PUSH1
ODC-CAM/SIP/PUSH1-SA
Open Door Frontplatte / Cover V4A CAM/SIP/PUSH1
ODC-SIP/BELL2-RAL
Open Door Frontplatte / Cover RAL SIP/BELL2
ODC-SIP/BELL2-SA
Open Door Frontplatte / Cover V4A SIP/BELL2
ODC-SIP/BELL4-RAL
Open Door Frontplatte / Cover RAL SIP/BELL4
ODC-SIP/BELL4-SA
Open Door Frontplatte / Cover V4A SIP/BELL4
ODC-SIP/PUSH1-RAL
Open Door Frontplatte / Cover RAL SIP/PUSH1
ODC-SIP/PUSH1-SA
Open Door Frontplatte / Cover V4A SIP/PUSH1
ODC-SIP/PUSH1/Finger-RAL
Open Door Frontplatte / Cover RAL SIP/PUSH1/FINGER 3
ODC-SIP/PUSH1/Finger-SA
Open Door Frontplatte / Cover V4A SIP/PUSH1/FINGER 3
ODC-Presence-RAL
Open Door Frontplatte / Cover RAL PRESENCE (Plus)
ODC-Presence-SA
Open Door Frontplatte / Cover V4A PRESENCE (Plus)
ODC-Transp-RAL
Open Door Frontplatte / Cover RAL TRANSPONDER
ODC-Transp-SA
Open Door Frontplatte / Cover V4A TRANSPONDER
ODC-Keypad-RAL
Open Door Frontplatte / Cover RAL KEYPAD
ODC-Keypad-SA
Open Door Frontplatte / Cover V4A KEYPAD
ODC-Finger-RAL
Open Door Frontplatte / Cover RAL FINGER 3
ODC-Finger-SA
Open Door Frontplatte / Cover V4A FINGER 3
OPENDOOR FRAMES
ODF-1-RAL
Open Door Frame for 1 module RAL incl security screws
ODF-1-XB
Open Door Frame für 1 Modul Natural incl security screws
ODF-2-RAL
Open Door Frame für 2 Module RAL incl security screws
ODF-2-XB
Open Door Frame für 2 Module Natural incl security screws
ODF-3-RAL
Open Door Frame für 3 Module RAL incl security screws
ODF-3-XB
Open Door Frame für 3 Module Natural incl security screws
ODF-4-RAL
Open Door Frame für 4 Module RAL incl security screws
ODF-4-XB
Open Door Frame für 4 Module Natural incl security screws
DIVUS OPENDOOR . 15
OPENDOOR MU
ODM-1MO
Open Door Montageunit für 1 Modul / mounting unit for 1 module
ODM-2MO
Open Door Montageunit für 2 Module / mounting unit for 2 modules
ODM-3MO
Open Door Montageunit für 3 Module / mounting unit for 3 modules
ODM-4MO
Open Door Montageunit für 4 Module (Benötigt ein ODC zu 3 und ein ODC zu 1 Einheit) / mounting unit
for 4 modules (needs 1 cover for 3 and 1 cover for 1 unit)
OPENDOOR ACCESSORIES
3
OD-SBIT
Spezialbit für Sicherheittsschraube V2A / Special bit for security screw V2A
OD-S
Schraubensatz mit 4 Sicherheitsschrauben / Bit insert with 4 security screws V2A
M5x25
Prepared to be used with finger sensor ekey home integra, www.ekey.net, article code 100504
Order Sample 1
Order Sample 2
1x ODM-3MO
1x ODM-3MO
1x ODF-3-XB
1x ODF-3-XB
1x ODC-CAM/SIP/PUSH1-SA
1x ODC-CAM/SIP/BELL2-SA
1x OD-Cam
1x OD-Cam
1x OD-Sip
1x OD-Sip
1x OD-Push_LED
1x OD-BellModule2
2x OD-Push
"Voice over IP" was established in the last years as a standard for digital
communication and has accordingly also found its place in building automation.
There, this technology is mainly used for door communication and internal
communication (intercom) between the single VoIP participants. The VoIP server
is the heart of such systems.
The individual VoIP participants in the network register themselves on the VoIP server, which manages the
VoIP participants and creates required connections on demand. The principle of operation is similar to
that of a telephone central with the only difference, that there are no traditional cable connections but all
devices are simply connected in the network among each other. For example if a guest starts a door call
on the external unit, the VoIP server ensures that the corresponding group of participants is called.
The DIVUS VoIP server family "DIVUS-VS" has been especially optimized for the requirements of door
communication and Intercom. VoiP communication is based on the widely used SIP standard. This "SIP
protocol" on its part communicates between the server and the clients via UDP telegrams (SIP UDP).
The portfolio consisting of DIVUS-VS1, DIVUS-VS2 and DIVUS VS3 offers the perfect solution for small to
large intercom and door intercom systems.
DIVUS OPENDOOR . 17
TECHNICAL DATA
DIVUS-VS1
DIVUS-VS2
DIVUS-VS3
Type of design
Ultra compact embedded box PC with
Asterisk based PBX software for small
intercom applications
Ultra compact embedded box PC with
Asterisk based PBX software for middle
intercom applications
Box PC with Asterisk based PBX software for big intercom applications
Linux with preconfigured Asterisk based
PBX software designed for:
Linux with preconfigured Asterisk based
PBX software designed for:
Linux with project specific preconfigured Asterisk based PBX software
designed for:
- Max. 15 concurrent calls
- Max. 30 concurrent calls
- Max. 280 concurrent calls
- Max. 10 Intercom external units
- Max. 10 Intercom external units
- Max. 20 Intercom internal units
- Max. 60 Intercom internal units
- Max. 560 SIP-Clients (Intercom externalunits/internal units)
SOFTWARE
If your project should exceed these
limits, options with more performance
are available on request. Please ask for
your customized solution.
Optimized to work only with DIVUS
Building Automation products
Optimized to work only with DIVUS
Building Automation products
Optimized to work only with DIVUS
Building Automation products
GENERAL CHARACTERISTICS
Processor
fanless low consumption CPU
Memory
2 GB DDR3-RAM (onboard)
Power supply
12 VDC / 100-240 VAC fanless external
Power consumption
max. 10 Watt
Guarantee
24 Months*
DRIVES
Storage medium
m-SATA SSD
INTERFACES
LAN/Ethernet
3 x 1 GbE (ext)
2 x USB 2.0 (ext)
USB (Universal Serial Bus)
Serial Interface
1 x RS232 (ext)
Video
no graphic interface, only remote access
AMBIENT CONDITIONS
Vibration
15G
Shock resistance
EMC
50G
EN 55022:2010, EN 61000-4-2:2009, EN 61000-4-3:2006/A1:2008/A2:2010, EN 61000-4-4:2012, EN 61000-4-5:2014, EN
61000-4-6:2014
+0°C to +35°C max.
Temperature
Relative humidity
5% to 80% at 25°C (no humidity/condense)
Authorization
CE
DIMENSIONS
Outside dimensions
168 x 157 x 30 mm
168 x 157 x 30 mm
*
warranty ex works, normally 24 months, fixed at order. All data refer on print date, errors and changes excepted.
NOTE: Internal connections are intended as inside the box unit, normally on pin header, external ones as outside the box.
168 x 157 x 30 mm
Innovative Intercom solution
VIDEOPHONE, the solution, to control your video intercom system comfortably
from your Building touchpanel.
Thanks to the use of VoIP technology, you have access to all intercom functions either through the
customizable interface of our VIDEOPHONE software or directly through your UDP enabled visualisation!
VIDEOPHONE offers the following advantages:
•
Compatible with any standard a/b compliant video INTERCOM such as Jung, TCS, GIRA, Siedle,
Elcom, Ritto and many more through
•
the separately sold VIDEOPHONE-BOX
•
Integration of up to 10 outside units, extendable on request
•
Interphone function for communication between the individual panels
•
Advanced intercom functions e.g. accept/reject, video fade, volume control including mute, recording
function, speed dial keypad
•
and extra buttons
•
Auto Show of the graphical interface in the presence of your calls.
•
Smart Volume Management: The software learns about the user‘s behavior to adjust the volume.
•
Dynamic speed-dial buttons: Up to 10 speed dial buttons can be activated directly from the telephone
book.
•
Photo Archive: A picture will be recorded on each door call.
DIVUS OPENDOOR . 19
VIDEOPHONE APP
With the DIVUS VIDEOPHONE APP you can bring your building© s door communication
on your smartdevice. Receive door calls conveniently on your smartphone or tablet
with picture and sound anywhere in your home. You can see who‘s at the door, talk
to visitors and activate the door opener at any time.
DIVUS VIDEOPHONE software is already preinstalled on Windows supported DIVUS
touchpanels. Additionally it is available for Windows desktop operating systems and
can be installed for example on a PC or netbook.
Touch panels for any application
7" – 10" – 15" – 19"
10" – 15" – 19"
15" – 19"
10" – 15" – 19"
22"
10" – 15"
Intercom & apps
KNX visualization system
NE
Q2
/2
W
01
7
DIVUS GmbH . Headquarters . Pillhof 51 . I-39057 Eppan (Italy) . Tel. +39 0471 633 662 . Fax. +39 0471 631 829
DIVUS Germany . Leinfelder Str. 64 . D-70771 Leinfelden-Echterdingen . Tel. +49 (0)711 5087 5923
VERS. 1/17
[email protected] . www.divus.eu
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement