Adhara 3000K- Optic 13° LED Spot - White Model No

Adhara 3000K- Optic 13° LED Spot - White Model No
Adhara 3000K- Optic 13° LED Spot - White
Model No: ADH.001.01.US
Date:
Project:
Fixture Type:
Specifier/Rep:
C ompliance LM-79-08
and LM-80-08
Certified by
Availab le for International sp ecificat ion s b y ad d in g 'INT' at t h e en d of t h e exist in g Mod el
# In t ern at ion al sp ec sh eet s are availab le u p on req u est
Model:
ADH.001.01.US
Installation:
Recessed for Non-Insulated Ceiling and
walls, suitable for display furniture
Light Color:
Warm White
Color
Temperature:
3000K
CRI:
93 (96 by request)
Fixture Finish:
White
Fixture
Material:
6026 Anticorodal aluminum alloy
Optic:
13°
Lamp Type:
Power LED
Lamp Life:
50,000 hrs at 70% of lamp lumen output
with IES LM-80. For optimized perfomance
follow instruction sheet.
Constant
Current:
350mA - 500mA
Number of
LEDs:
1
Total Wattage:
1W-2W
IP Rating:
IP40
Diameter:
40mm / 1 9/16"
Height:
24.5mm / 1"
Weight:
42g / 1.48oz
Breaking
Strength:
IK03
Screws:
Stainless Steel AISI 316L
Gasket:
VHB
Exact Measurements: Metric
Additional Details
Recessed adjustable spotlight for indoor applications. Recessed into
wall or ceiling; spotlight; adjustable. Power Supplies and Control gear
are not included see components, for wiring diagram see downloads.
LEDs are also available in Red, Blue and Green colors on request
30 Tycos Dr. Toronto, ON Canada M6B 1V9 PH: 800.388.3382 / 416.247.9221 FAX: 416.247.9319 www.zaneen.com, [email protected]
Page 1 of 2
Adhara 3000K- Optic 13° LED Spot - White
Model No: ADH.001.01.US
Date:
Project:
Fixture Type:
Specifier/Rep:
Power Supply:
Constant current supply 350mA - 500mA
with series connection (Not Included)
Control Gear:
Sold separately (see components)
Lumen Chart
Photometric File
Power
Color Temperature
Nominal Lumen
Actual Lumen
ADH.001.23.1 1W
1W
3000 K
103
89
ADH.001.23.1 2W
2W
3000 K
138
122
System Components
Power Supply - 6W 350mA constant current ALI.0076.99 Main Voltage Constant Current - 100÷240v, 50/60Hz
Power Supply - 10W 350mA constant current ALI.0074.99 Main Voltage Constant Current - 120÷240v, 50/60Hz
Power Supply - 18W 350mA constant current ALI.0072.99 Main Voltage Constant Current - 100÷265v, 50/60Hz
Power Supply - 20W 500mA constant current DR020500 Main Voltage - 115÷230V, 50/60Hz
Controller Unit - 1W 350mA Current controller - 1-5 LED ECO.0030.99 12mm / 1/2"Ø x 1W 350mA, 24Vdc
Controller Unit - 2W 500mA Current converter ECO.0046.99 for 1-5 LED
Power Supply Unit - 350mA RGB Current controller - 1 Led RGB ECO.0032.99 18mm / 11/16" x 64 mm/ 2 1/2" - 350mA RGB, 24Vdc
Power Supply - 20W 500mA constant current DR020500 Main Voltage - 115÷230V, 50/60Hz
Alternative Finish Models
Adhara 3000K - Optic 13° LED Spot - Aluminum ADH.001.23.US 1 Power LED, 1W - 350mA / 2W - 500mA - 3000K - Anodized Aluminum
Adhara 3000K- Optic 13° LED Spot - White ADH.001.01.US 1 Power LED, 1W - 350mA / 2W - 500mA - 3000K - White
Available Sizes and / or Lamping
Adhara 4000K - Optic 13° LED Spot - White ADH.002.01.US 1 Power LED, 1W - 350mA / 2W - 500mA - 4000K - White
Adhara 3000K - Optic 35° LED Spot - White ADH.003.01.US 1 Power LED, 1W - 350mA / 2W - 500mA - 3000K - White
Adhara 4000K - Optic 35° LED Spot - White ADH.004.01.US 1 Power LED, 1W - 350mA / 2W - 500mA - 4000K - White
30 Tycos Dr. Toronto, ON Canada M6B 1V9 PH: 800.388.3382 / 416.247.9221 FAX: 416.247.9319 www.zaneen.com, [email protected]
Page 2 of 2
Wiring Diagram Reference
R
Date:____________________________ Project:_______________________________
Fixture Type: ______________________ Specifier/Rep:__________________________
Wiring diagrams and electrical connections
The new lighting systems, that use light sources in a LED solid state must be
connected to the main voltage through electronic devices that maintain the critical
parameters of operation constant.
With Leds in particular, the current values that pass through the light source
must remain constant and if necessary measurements are not taken to keep
these parameters constant, the LED will tend to absorb higher currents resulting
overheating triggering a vicious mortal cycle of the semiconductor. Because of
this physical-electric phenomenon the systems with LED technology need very
sophisticated control devices compared to the traditional sources.
The current control can be integrated into the power supply or can be placed between
the power supply and the LED system. In this case the Led connection should be
done in series with a maximum quantity of 10/12 Led that can be connected
In the most evolved systems the control electronic can be split and integrated
directly on the PCB together with the Leds; here the connection can be done in
parallel with a 24V dc power supply and without any limit of the quantity of Leds
that can be connected
To facilitate the user in consulting this catalog, in this section there is a list of all
the diagrams of connection between control gears , interfaces and power supplies,
as well as the combination of the correct power supplies / control gear and lighting
systems showing the article codes.
Important note:
Suggested maximum distance from driver: 30ft (using 18 AWG solid copper wire)
Disclaimer: Distances, type of wiring and gauge must be determined by a certified professional to avoid “voltage drop” problem.
Maximum 9m (30 ft)
+
+
-
+
-
+
-
+
-
+
-
+
-
Serial connection
Maximum 9m (30 ft)
+
+
-
+
-
Parallel connection
30 Tycos Drive, Toronto, Ontario, Canada M6B 1V9 PH: 800.388.3382 / 416.247.9221 FAX: 416.247.9319, www.zaneen.com [email protected]
Wiring Diagram Reference
R
Date:____________________________ Project:_______________________________
Fixture Type: ______________________ Specifier/Rep:__________________________
A
Series connection for 1-2W LED
Power supply codes
350mA
ALI.0076.99
ALI.0074.99
ALI.0072.99
LED
OUT
+
IN
+
LED
LED
-
+
-
+
LED
-
+
-
Power supply
500mA
DR020500
DR026500
-
30 Tycos Drive, Toronto, Ontario, Canada M6B 1V9 PH: 800.388.3382 / 416.247.9221 FAX: 416.247.9319, www.zaneen.com [email protected]
Wiring Diagram Reference
R
Date:____________________________ Project:_______________________________
Fixture Type: ______________________ Specifier/Rep:__________________________
H
Series connection with current control for 1-2W LED
Current control codes
350mA
500mA
ECO.0030.99* ECO.0046.99*
1-10Vdc
Multi-system interface
ECO.0038.99
or
DALI converter
ECO.0049.99
* Dimming signal
IN
OUT
+
Power supply
-
IN
+
-
OUT
+
LED
+
-
LED
+
-
LED
+
-
Current controller
-
* DMX interface Cod. ECO.0047.99 or ECO.0038.99 or to the DALI converter Cod. ECO.0049.99)
30 Tycos Drive, Toronto, Ontario, Canada M6B 1V9 PH: 800.388.3382 / 416.247.9221 FAX: 416.247.9319, www.zaneen.com [email protected]
Power supply codes
24Vdc
ALI.0059.99
ALI.0060.99
ALI.0061.99
ALI.0103.99
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement