MINERAL CARRYING VEHICLE USER MANUAL

MINERAL CARRYING VEHICLE USER MANUAL
 MINERAL CARRYING VEHICLE USER MANUAL 1 Contents
1. 2. Introduction .......................................................................................................................................... 3 1.1 Purpose ........................................................................................................................................ 3 1.2 Vehicle Owner Registration ...................................................................................................... 3 Vehicle Registration ............................................................................................................................. 7 2.1 Update Profile .......................................................................................................................... 11 2.2 Inside Vehicle Registration .................................................................................................... 12 2.2.1 Add Vehicle ......................................................................................................................... 13 2.2.2 Application Status ............................................................................................................... 15 2.2.3 Application History ............................................................................................................. 18 2.2.4 Print Certificate ................................................................................................................... 20 2.3 Outside Vehicle Registration .................................................................................................. 21 2.3.1 Add Vehicle ......................................................................................................................... 21 2.3.2 Print Applications ............................................................................................................... 24 2.3.3 Application Status ............................................................................................................... 26 2.3.4 Application History ............................................................................................................. 28 2.3.5 Print Certificate ................................................................................................................... 30 2 1. Introduction
1.1
Purpose
This is a web based application for registering mineral carrying vehicles to prevent illegal mineral carrying. In existing system there is no process for registering mineral carrying vehicles and over the state huge number of inside state and outside state vehicles carrying minerals and ores from different sources to different destinations. Out of them lots of unauthorized vehicles are also carrying minerals. To prevent these illegal mineral transportation problems this is the application developed for registering valid vehicles which will be validated by RTO (inside state vehicle) and STA (outside state vehicle). 1.2
Vehicle Owner Registration
To register vehicle the vehicle owner should register himself into i3MS portal. Open the following Home Page as shown below. To register vehicle owner: ¾ Click the Apply Online tab. 3 On click, the user can view the following Page as shown below: In this page two types of link are available online registration and view status. Online registration links are used for registering new user and view status links are used to getting log in information of registered user. ¾ To register a new vehicle owner click Vehicle Owner registration link. On click, the user can view the following registration Page as shown below: 4 The Vehicle Owner provides his detail information into this screen. Enter Name Enter Vehicle owner address Enter district Select state Enter pin code Enter unique pan card number Upload pan card copy Enter mobile number Enter email id Select security question Enter answer Enter confirm answer Enter captcha text. Click reset for reset all fields Click register button On click register button, the user gets the Login information through Email and SMS, and can view the registration number in following Page as shown below: ¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
If user does not have mobile or Email Id then he can get login information by using the Acknowledgement Number. the user can login by clicking Click here to Login 5 if user does not have email id or mobile number he can get the login info by clicking Click here to get login info ¾ Note the registration number ¾ Click on Get Login Info On clicking user can view the following page: ¾ Enter Acknowledgement number ¾ Click show button On click show button security question will be display to user. 6 ¾ Enter security answer ¾ Click on Get Login Info button If answer is correct user can view user name and password in the following page: Click on Click Here To Login button for login to the system On clicking the button user view the login page: 2. Vehicle Registration
After the vehicle owner registration vehicle owner get the user id and password to Login to the system. To login into the system click on “i3MS Login” tab in home page. On clicking the login tab user can view the following page: 7 ¾ Click on Vehicle Owners tab On clicking Vehicle Owners tab user can view the following page: ¾ Enter user id ¾ Enter password 8 ¾ Click on Submit button For first time login user can view the following page: User provide his detail contact information here ¾
¾
¾
¾
¾
¾
¾
Enter new password Enter confirm password Enter Name Enter Designation Enter Email id Enter alternate Email Id Enter mobile number 9 ¾ Enter alternate mobile number ¾ Enter stationed at If user wishes a copy of communication to be marked any additional person then provide detail information ¾
¾
¾
¾
¾
¾
¾
¾
¾
Enter Name Enter Designation Enter Email id Enter alternate Email Id Enter mobile number Enter alternate mobile number Enter stationed at Click reset button to reset all fields Click submit button On clicking the submit button user can view the welcome page: 10 User having three primary link on left menu. •
•
•
2.1
Update Profile Inside Vehicle Registration Outside Vehicle Registration Update Profile
After login to the system vehicle owner can update his profile by clicking the primary link update profile. User can not update his name and Pan Card. On clicking the link user can view the following page shown below: 11 ¾ Update the fields user wants to update ¾ Click on Update button. On clicking Update button data will be updated. 2.2
Inside Vehicle Registration
This process is used to register inside state vehicles and will be validated by RTO. For vehicle registration Vehicle owner should login with the user name and password into i3MS portal. Click on Inside Vehicle Registration primary link in the left menu under MCV global link. On cliking the primary link user can view the following page: 12 The Inside Vehicle Registration can be discussed under the following tabs‐ • Add Vehicle • Application Status • Application History • Print Certificate 2.2.1 Add Vehicle For adding inside vehicle user select the Add Vehicle tab and provide vehicle detail On clicking Add vehicle user can view the above screen. ¾ Enter vehicle registration number ¾ Enter vehicle engine number ¾ Enter chassis number. ¾ Click on browse button and upload the vehicle image with front view ¾ Click reset button for reset all fields ¾ Click Add Vehicle button On clicking Add Vehicle button vehicles are added into the below table shown in following page: 13 ¾
¾
¾
¾
Click on Edit image to edit the vehicle detail Click on Delete image to delete the vehicle detail. Click Vehicle Image to preview the full image of vehicle. After adding all vehicles click Submit For Verification button On clicking button user can view an application number . 14 The vehicle details are then sent for verification with RTO online. The verification process takes 24 hours. the user has to login again after 24 hours to view the verification status. 2.2.2 Application Status After login to the system click on the primary link inside vehicle registration select Application Status tab. This process is used to display the RTO validation status that are total applied vehicles, verified vehicles, invalid vehicles and also payment status for vehicles. By selecting Application Status tab user can view the following screen: User can search an Application status by giving application number ¾ Enter application number ¾ Select from date and to date ¾ Click search button On clicking search button it will display an application status. ¾ Click on the number shown below total vehicle applied column to view the applied vehicle list. ¾ Click on the number shown below total vehicle verified column to view the verified vehicle list. ¾ Click on the number shown below total vehicle invalid column to view the invalid vehicle list. 15 If any vehicle is validated then a payment link will be shown under Status column. For payment of vehicle click on Make Payment link under status column. On clicking make payment link user can view following page: 16 ¾ Click on Make Payment button ¾ A confirmation massage will open click ok. On clicking make payment button DTI portal will display as shown in following page: After successful payment it will return reference challan number and bank transaction id User note the challan number and bank transaction id for further reference. 17 After payment user can view the following page: ¾ Enter reference challan number ¾ Enter bank transaction id ¾ Click submit button 2.2.3 Application History Application history tab is showing the application history details that are when application applied, when payment is done, when application approved/reject, last action taken by whom, history of that application and status of the application. After login to the system user click the MCV global link shown in left menu click on inside vehicle registration select Application History tab. User can view the following screen: 18 User can search an application number by the search option where user has to give the application number and date range. ¾ Click on Application number to view vehicles applied under that application. ¾ Click on History to view application history. On clicking the application number user can view all vehicle applied under that application number shown below the screen: On clicking the History user can view the Application history detail: 19 2.2.4 Print Certificate In print certificate, vehicle owner can take the print out of MCV certificate for approved vehicles. And also vehicle owner can view the vehicle status. Here search option is also available for searching a vehicle by giving vehicle registration number. After login to the system user expand the MCV global link click on Inside Vehicle Registration primary link, select Print certificate tab On clicking the print certificate tab user can view the following screen: Here user can view the vehicle status with the background color red, green and yellow. ¾ Green indicates valid ¾ Yellow indicates validity is about to expire ¾ Red indicates validity is already expire 20 ¾ Click on print option to print certificate On clicking the print option user can view the view the MCV certificate: 2.3
Outside Vehicle Registration
This process is used to register outside state vehicles. Which will be validated by STA Under this process following processes are present: • Add Vehicle • Print Application • Application Status • Application History • Print Application 2.3.1 Add Vehicle For adding outside vehicle user login to the system expand MCV global link click on Outside Vehicle Registration primary link, select the Add Vehicle tab and provide vehicle detail. On clicking Add vehicle user can view the below screen. 21 In above screen vehicle owner provide outside vehicle detail ¾ Enter Vehicle registration number ¾ Enter vehicle registration date ¾ Enter chassis number ¾ Enter engine number ¾ Enter permit validity ¾ Enter fitness validity ¾ Enter road tax validity ¾ Enter vehicle category/class ¾ Enter RC book number ¾ Upload RC book copy ¾ Enter National permit number ¾ Upload national permit copy ¾ Upload vehicle photo with front view ¾ Click Add Vehicle button On clicking Add Vehicle button vehicle will be added to a table showing in next screen: 22 After adding all vehicle user can edit the vehicle detail, delete the vehicle from the table ¾ Click Proceed To Print button. ¾ After clicking the button a confirmation massage will come click ok On clicking the Ok button vehicles will be added successfully 23 The application Number is displayed on the screen for further reference. The user has to take the print out of the application and submit it to the Directorate of Mines along with an authorized letter from the State Transport Authority for verification. 2.3.2 Print Applications Print application is the process to take print out of vehicle documents for the applied vehicles. Then vehicle document will be send physically to STA for initial verification. For this process vehicle owner login to the system expand the MCV global link click on Outside Vehicle Registration primary link, select Print Application tab Vehicle owner can view the following screen: ¾ Vehicle owner can view the total vehicle applied by clicking the number below “Total Vehicle Applied” column. 24 ¾ Click on Print option to take vehicle documents. On clicking the number user can view: On clicking the Print option user can view the following vehicle document: 25 Print this document and send to STA for initial verification. 2.3.3 Application Status This process is used to display the STA validation status that are total applied vehicles, verified vehicles, invalid vehicles and also payment status for vehicles.. Vehicle owner login to the system expand MCV global link click on Outside Vehicle Registration primary link, select Application Status tab On clicking the tab user can view the following screen: If application is not initially verified the status of that application will be shown as applied. The payment link will be shown against initial approved applications. User can search an Application status by giving application number ¾
¾
¾
¾
Enter application number Select from date and to date Click search button Click on the number shown below total vehicle applied column to view the applied vehicle list. 26 ¾ Click on the number shown below total vehicle verified column to view the verified vehicle list. ¾ Click on the number shown below total vehicle invalid column to view the invalid vehicle list. On clicking total vehicle applied: For payment of vehicle click on Make Payment link under status column. On clicking make payment link user can view following page: ¾ click on Make Payment button ¾ A confirmation massage will open click ok. On clicking make payment button DTI portal will display as shown in following page: 27 After successful payment it will return reference challan number and bank transaction id User note the challan number and bank transaction id for further reference. After payment user can view the following page: ¾ Enter challan number ¾ Enter Transaction id ¾ Click submit button 2.3.4 Application History 28 Application history tab is showing the application history details that are when application applied, when payment is done, when application approved/reject, last action taken by whom, history of that application and status of the application. After login to the system user click the MCV global link shown in left menu click on Outside vehicle registration select Application History tab. User can view the following screen: User can search an application number by the search option where user has to give the application number and date range. ¾ Click on Application number to view vehicles applied under that application. ¾ Click on History to view application history. On clicking the application number user can view all vehicle applied under that application number shown below the screen: 29 On clicking the History user can view the Application history detail: 2.3.5 Print Certificate In print certificate, vehicle owner can take the print out of MCV certificate for approved vehicles. And also vehicle owner can view the vehicle status. Here search option is also available for searching a vehicle by giving vehicle registration number. 30 After login to the system user expand the MCV global link click on Inside Vehicle Registration primary link, select Print certificate tab On clicking the print certificate tab user can view the following screen: Here user can view the vehicle status with the background color red, green and yellow. ¾ Green indicates valid ¾ Yellow indicates validity is about to expire ¾ Red indicates validity is already expire ¾ Click on print option to print certificate On clicking the print option user can view the view the MCV certificate: 31 32 
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement