LX Mini Map

LX Mini Map
LX Navigation d.o.o
LX Mini Map short form
23.8.2010
LX Mini Map
Short form catalogue
LX Mini Map
LX Mini map is Windows CE 5.0 running device which is supported by sunshine readable color display with
backlight and touch panel. Aluminum housing makes the unit extremely robust and reliable. One back mounted
9P SUB D type connector is used for power and also for data input. The unit hasn’t build in GPS receiver and
needs external GPS source.
The unit is designed and produced by LX navigation and therefore meets all glider pilot requirements. Only
high quality materials and components are used and this fact guaranties a long life time and also availability for
many years.
SD card solution makes possible to run navigation programs directly from SD card, after using of auto run
function, which is factory implemented. Immediately after power on, the unit is ready for use without any pilot
manipulation and inputs.
Suitable mounting frames are also available and those devices makes possible to realize a panel integral
solution. Otherwise the unit can be installed anywhere in the cockpit.
LX Mini Map
1
LX Navigation d.o.o
LX Mini Map short form
Technical data:
Size: 80 x110 x 27 mm
Weight: 350 g without cable set
Display: 4,3 inch (10.9 cm) 800x480 pixel, with touch panel
Power supply: 12V DC
Consumption: 400 mA @12 V DC
CPU:
Marvell PXA320 806 MHz
Connectivity:
1x RS232
1x SD Card
1x USB 1.1 device
Running programs:
SeeYou Mobile (PNA version), Sky map, Winpilot (PNA version beta)
2
23.8.2010
LX Navigation d.o.o
LX Mini Map short form
23.8.2010
LX Mini Map KB
A plug and play keyboard module can be added to any LX Mini Map unit. The module consists of two rotary
switches and 5 keys (two of them are parts of rotary switches). The signals from the rotary switches and keys are
converted into PS2 commands and in that form sent to the CPU. Conversion is realized via microcontroller which
is a standard part of the unit and under full LX Navigation control.
LX Mini Map KB as “portrait”
3
LX Navigation d.o.o
LX Mini Map short form
LX Mini Map KB as “landscape”
Technical data:
Size: 80x133 x27 mm
Weight: 360 g without cable set
Display: 4,3 inch (10.9 cm) 800x480 pixel, with touch panel
Power supply: 12V DC
Consumption: 400 mA @12 V DC
Keyboard module (5 push buttons, 2 rotary switches)
CPU:
Marvell PXA320 806 MHz
Connectivity:
1x RS232
1x SD Card
Running programs:
SeeYou Mobile (PNA version), Sky map, Winpilot (PNA version beta)
1x USB 1.1 device
4
23.8.2010
LX Navigation d.o.o
LX Mini Map short form
23.8.2010
LX Mini Map KB-V
An extension to LX system bus makes possible to connect LX Navigation Vario module as a part of the system.
Such a configuration builds a real Vario/Navigation system. Vario unit is controlled by knobs and rotary
switches, which are built into LX Mini Map keyboard module and therefore the Vario module doesn’t need any
input devices. A Junction Box is a part of the system and makes possible to connect Vario unit, GPS source
and some other bus participants to the LX Mini Map.
LX Mini Map KB-V as “landscape”
LX Mini Map KB-V as “portrait”
5
LX Navigation d.o.o
LX Mini Map short form
Technical data:
Size: 80 x133 x 27 mm
Weight: 360 g without cable set and Vario unit
Display: 4,3 inch (10.9 cm) 800x480 pixel, with touch panel
Power supply: 12V DC
Consumption: 400 mA @12 V DC
Keyboard module (5 push buttons, 2 rotary switches)
Juction box for bus extension and GPS input
CPU:
Marvell PXA320 806 MHz
Connectivity:
1x RS232
1x SD Card
1x USB 1.1 device
Running programs:
SeeYou Mobile (PNA version), Sky map, Winpilot (PNA version beta)
6
23.8.2010
LX Navigation d.o.o
LX Mini Map short form
23.8.2010
LX Mini Map Installation Solutions
1 General
The unit comes with a suitable mounting frame which makes possible to install the unit in
any cockpit. A snap in fixation system makes insertion and also reinsertion very easy.
Delivery included is also a suitable harness which depends on mounting frame type. A part of
harness is also a Junction Box and this device enables an absolutely plug and play installation
of electrical connections.
2 Mounting frames
The mounting frames are black colored aluminum parts which are coming in several variants;
the variant depends on installation intentions.
2.1 Basic mounting frame
Consist of an aluminum black painted plate wit snap in fixation device and four holes which
makes possible to install the unit over one 80 mm standard cut out.
A cut out for 9 P connector is situated in the central part of the frame.
Landscape and also portrait orientation is possible.
7
LX Navigation d.o.o
LX Mini Map short form
23.8.2010
2.2 Advanced mounting frame
This is an extension of basic version and can be used in cases where the Mini Map won’t be
installed on the panel surface. Another back mounted aluminum part is added to the basic
version, where a 9P connector and a gooseneck are mounted. As the unit is snapped in also all
electric connection are done automatically. This makes possible to use LX Mini Map in
different gliders.
Landscape and also portrait orientation is possible.
8
LX Navigation d.o.o
LX Mini Map short form
23.8.2010
3 Junction Box
Every unit comes with Junction box; this is in fact a printed circuit board with one 6P
telephone type connector for GPS connection, two 9P SUB D connectors for connection of
vario unit and possible interfaces and a spring terminal block. The spring terminal block
terminates the wires coming out of LX Mini Map.
9
LX Navigation d.o.o
LX Mini Map short form
4 Gallery
On panel installation controlled by LX Remote stick
On panel installation controlled by keyboard module
10
23.8.2010
LX Navigation d.o.o
LX Mini Map short form
Out of panel installation after using of gooseneck
Out of panel installation after using of existent PDA support
11
23.8.2010
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement