Extinguisher Stopper
EXTINGUISHER STOPPER
®
EXTINGUISHER STOPPER
Stop theft, vandalism or misuse of fire extinguishers.
If you are fed up with replacing or recharging your fire
extinguisher, this sturdy, tamper-proof, self-contained
device is the answer. It has proven highly effective in
helping stop theft, misuse or vandalism of fire extinguishers.
The Extinguisher Stopper will leave the extinguisher totally
accessible for emergencies and will not interfere in the event
of a real fire.
HOW IT WORKS
Its highly visible ‘stop sign’ design discourages wrongful use.
If the protected fire extinguisher is moved from its normal
position, an integral sounder emits a piercing alarm. The
device is easy to install and a deactivation
cable is supplied for ease of servicing the extinguisher.
The Extinguisher Stopper is supplied complete with an
operating cable kit and a 9V PP3 alkaline battery.
Features
6200
•
Highly visible ‘stop sign’ design discourages wrongful use
of extinguisher
•
Sounds a powerful 98dB (at 1 metre) warning alarm
when activated (95dB low volume setting if desired)
•
Self contained 9 VDC alkaline power source is provided
•
Lifetime guarantee against breakage of polycarbonate
housing (one year on electronic components)
6200
Part
Numbers
6200/
DC1224
Extinguisher Stopper
(includes operating cable kit and seal)
Extinguisher Stopper suitable for
connection to 12 or 24 VDC
ACCESSORIES
6204
6205
6206
F021
NB:
Service/deactivation cable
Operating cable kit
(includes operating cable, cable seal
and crimp)
Operating cable seal
Tamper key
The 6200 comes complete with
everything needed for a single
extinguisher installation
Vimpex Limited
Distributed by:
Star Lane, Great Wakering,
Essex SS3 0PJ England
Tel: +44 (0) 1702 216999, Fax: +44 (0) 1702 216699
E-mail: [email protected]
www.vimpex.co.uk
Part No: DS/EXST/ISS1
Worcestershire, UK
•
Virtually indestructible polycarbonate housing
•
Deactivation cable is provided for service by
authorised personnel
•
Remote powered 12 or 24 VDC model available
•
Compact design (136mm in diameter and 50mm deep)
mounts easily next to the extinguisher
•
For fire extinguishers housed in cabinets, refer to the
6255 Mini Theft Stopper
Battery
• Select the appropriate position for mounting the
Extinguisher Stopper so that the cable can be crimped
around the neck of the extinguisher. Ensure the
positioning does not obstruct the access of the
extinguisher if required in an emergency.
• Remove the cover from the unit using the screwdriver
provided. Do not remove the deactivation cable supplied
with the unit.
• Mark the fixing positions using the base as a template.
• Drill the holes, fasten wall fixings and secure the base in
position using the screws provided.
• Disconnect the battery and remove the deactivation
cable. Insert one end of the operating cable into the
alarm unit, reconnect the battery and replace the cover.
• Place the operating cable around the neck of the
extinguisher and crimp aluminium seal using heavy duty
pliers.
• Retain the deactivation cable for servicing the alarm or
the extinguisher.
To change the battery, remove operating cable from alarm unit and
replace with deactivation cable. Remove the alarm unit cover using
screwdriver supplied. Slide battery from holder, unsnap connector
and discard. Replace with equivalent 9V battery (Part No. BAT 9VDC)
and replace cover. Remove deactivation cable and re-insert
operating cable.
Service
Installation Instructions
Dimensions and Technical Information
To service the fire extinguisher, simply remove the operating cable
from the alarm unit and replace with deactivation cable. If the
extinguisher is being replaced a new operating cable should be
fitted. (Order part No. 6205).
SPECIFICATIONS
Housing
1/8”/3mm polycarbonate
Dimensions
136mm w x 136mm h
x 50mm d
Power Source
9 VDC Alkaline
Sounder Output
95 decibles - low
98 decibles - high
Cable
1/8”/3mm galv. steel
Standby Current
None
Alarm Current
40 mA at 95 dB
150 mA at 98 dB
*12VDC and 24VDC models are available
STEEL ACTIVATION CABLE
Replacement Part No. STI 6205
POLYCARBONATE BASE
98 dB/95 dB ALARM
SERVICE CABLE
POLYCARBONATE COVER
PERMANENT CRIMP
AROUND NECK OF
EXTINGUISHER
TAMPER KEY
HIGH VOLUME
50mm DEPTH
(1.97 in.)
STOP
LOW VOLUME
EMERGENCY USE ONLY
136mm (5.35 in.) HEIGHT/WIDTH
ALARM SOUNDS WHEN EXTINGUISHER IS REMOVED
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement