TSM/TSSM ECM Password Learn Procedure

TSM/TSSM ECM Password Learn Procedure
TSM/TSSM ECM Password Learn Procedure
Step
1
2
3
Action
Confirmation
Set Run switch to Run
Turn Ignition key On-Off-OnOff-On-Off-On and then toggle
the Left Turn Signal switch
twice.
Turn Ignition key Off-On
Verify the Check Engine lamp
and Security Lamp illuminate
briefly and then turn off.
Notes
Security lamp will not
illuminate on non-security
(TSM) Twin Cam models.
4
Attempt normal start one time. Engine starts and stalls
immediately. check engine
lamp stays on.
5
Wait 10 seconds
6
Wait until Security Lamp turns
off or a minimum of 10 minutes
has passed.
Quickly (within 2 seconds) turn Security Lamp remains lit for
Ignition key OFF-ON
V-Rod and TC88 with TSSM.
Lamp will not be on for TC88
TSM models.
Wait until Security Lamp turns
Password Learning mode for
off or a minimum of 10 minutes
10 minutes. Do Not cycle the
has passed.
ignition or disrupt power.
7
8
Password has not been
learned and sets trouble code
P1009, thus stopping fuel
flow.
Security Lamp remains lit for ECM enters Password
V-Rod and TC88 with TSSM. Learning mode for 10
Lamp will not be on for TC88 minutes. Do Not cycle the
TSM models.
ignition or disrupt power.
9
Quickly (within 2 seconds) turn Security Lamp remains lit for
Ignition key OFF-ON
V-Rod and TC88 with TSSM.
Lamp will not be on for TC88
TSM models.
10
Wait until Security Lamp turns
off or a minimum of 10 minutes
has passed.
11
Quickly (within 2 seconds) turn Security Lamp light and then
Ignition key OFF-ON
turn off. Lamp will not be on
for TC88 TSM models.
12
Turn Ignition switch OFF. Wait
15 seconds. Turn Ignition
switch ON and start engine to
confirm the Password Learn
Procedure is successful.
Password Learning mode for
10 minutes. Do Not cycle the
ignition or disrupt power.
Engine will start and remain
running. If engine immediately
stalls and fails to restart the
Password Learning mode
was not successful. Start over
at step 1.
The above steps must be timed and performed exactly as described. Any deviation will
require you to start again from step 1.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement