Purchasing Guide
110 Tractor Loader Backhoe
Add Versatility With John Deere
& Frontier Attachments:
iMatch™ Quick Hitch
iMatch AutoHitch™
Spark Arrester Muffler
Retractable 3-Inch Seat Belt
Slow Moving Vehicle Kit
Rear Worklight Kit
High-Output 55-Amp Alternator
Rubber Stabilizer Pads
Backhoe Stabilizer Cylinder Guards
Hydraulic Auger
Rear Drawbar Hitch
Push Button Warning Horn
Lockable Fuel Tank Cap
Hydraulic Breaker
Strobe Warning Light
Rear Demolition Protection Screen
Boom Protection Plate and Hammer Pocket
Backhoe Bucket Hydraulic Clamp
Soft Side Weather Enclosure
Hydraulic “Top and Tilt” 3-Point Rear Hitch
Engine Coolant Heater
Adjustable Mirror Kit
Category 1, 3-Point Hitch
Standard or Heavy Duty Front Buckets
4-in-1 Front Bucket
Utility Front Bucket
Backhoe Pin-On Buckets
Quick Attach Backhoe Buckets
Belly Pan Protection Kit
Bale Spear
Foundry Front Bucket
Construction Front Bucket
AG Utility Front Grapple
Scrap Front Grapple
Tine Front Grapple
F E AT U R E S
• In one compact, easily transported package,
the 110 Tractor Loader Backhoe offers the hydraulic
option of a skid steer, the digging ability of a
compact excavator and the utility of a John Deere
tractor.
• Its versatility with tools is just as impressive,
with standard skid steer mounting plates in front,
optional loader and backhoe auxiliary hydraulics
and Category 1, 3-point hitch with 540 rpm PTO.
• Power Curve™ Construction-Duty backhoe,
modeled directly from Deere 310 Backhoe Loader,
employs custom-designed valves for precise
operation and feathering.
• Construction-Duty loader maximizes lifting
capacity with an efficient use of high strength,
low alloy steel.
• The 110 converts over 70 percent of net engine
power into hydraulic horsepower (theoretical),
so both backhoe and loader performance are
exceptional.
• LoadMatch™ power management system (similar to
that used on Deere Hydrostatic Drive Crawlers)
makes stalling almost impossible. The transmission
automatically adjusts to engine output.
• Steep hood and lowered backhoe controls allow
excellent forward and rearward visibility.
89
46940 Page 89
• Unique “creep-to-reposition” feature permits
the machine to be moved backwards or forwards
along a trench without the operator having to leave
the backhoe position.
• Unlike most standard compact tractors, the 110
is designed for full-time loader and backhoe work
with rugged components like a massive full-length
protective subframe and thick cast-iron front axle.
• Easily transported: Only a heavy-duty pickup and
trailer rated 10,000 pounds. GVWR are required.
(Refer to state and local regulations for
specific requirements.)
Purchasing Guide
Vertis QCA
1300 19th Street, Suite 200
East Moline, IL 61244
25 Black
50 Black
75 Black
Black
SPECIFICATIONS
110
Engine:
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gross HP (kW). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Net HP (kW) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PTO HP (kW) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hydraulic HP (kW) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
No. of Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Total Displacement, cu. in. (L). . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Diesel, direct injection
43.0 (32.1)**
41.0 (30.6)
33.0 ( 24.6)
30.9 (23)*
4
121.7 (2.0)
No.1 Diesel, No.2 Diesel, B5 Biodiesel
Transmission:
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydrostatic w/load-sensing system
Range Speeds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Max Travelling Speed, mph (kph) . . . . . . . . . . . . . . . . . . . . . . . . 16.1 (26.1)
Power Train:
Front Axle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Front Differential . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Final Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rear Power Take Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Front Tires (R4 or R3 Tread Pattern) . . . . . . . . . . . . . . . . . . . . . .
Rear Tires (R4 or R3 Tread Pattern) . . . . . . . . . . . . . . . . . . . . . .
Mechanical, bevel gear
Cast, four pinion gears
Power, hydrostatic, 58° turn
Planetary, inboard
Wet disc, mechanical
540, fully independent
10×16.5 8PR
17.5L×24 8PR
Hydraulic System:
Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Total Flow, gpm (Lpm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System Operating Pressure, psi (kPa). . . . . . . . . . . . . . . . . . . . .
Oil Cooler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3, Open center systems
23.6 (89.2)
3,000 (20 684)
Steel, thick core, 190 sq. in.
Capacities:
Fuel Tank, gal. (L) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.3 (58)
Cooling System, gal. (L) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4 (9)
Transmission and Hydraulics, U.S. gal. (L) . . . . . . . . . . . . . . . . . 15.0 (57)
Loader (ASAE S301.3):
Lift Height to Pivot Pin, ft. (mm) . . . . . . . . . . . . . . . . . . . . . . . .
Reach at Maximum Lift Height, ft. (mm) . . . . . . . . . . . . . . . . . .
Maximum Dump and Rollback Angle . . . . . . . . . . . . . . . . . . . . .
Lift Capacity to Max. Height,
Pivot Pin, lb. (kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lift Capacity to Max Height, lb. (kg). . . . . . . . . . . . . . . . . . . . . .
Breakout Force at Pivot Pins, lb./ft. (N) . . . . . . . . . . . . . . . . . . .
Loader Raise Time, sec. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Loader Lowering Time, sec . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2,727 (1237)
2,042 (926)
3,965 (17 635)
3.44
2.31
Backhoe:
Maximum Digging Depth, ft. (mm). . . . . . . . . . . . . . . . . . . . . . .
Digging Depth, 2 ft. Flat Bottom, ft. (mm) . . . . . . . . . . . . . . . .
Truck Loading Height, ft. (mm) . . . . . . . . . . . . . . . . . . . . . . . . . .
Reach from Swing Pivot, ft. (mm) . . . . . . . . . . . . . . . . . . . . . . . .
Stabilizer Spread, Operating, ft. (mm) . . . . . . . . . . . . . . . . . . . .
Stabilizer Arm Leveling Angle . . . . . . . . . . . . . . . . . . . . . . . . . . .
Boom Swing Arc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bucket Rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Angle of Departure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Digging Force, Bucket Cylinder, lb. (N). . . . . . . . . . . . . . . . . . . .
Digging Force, Crowd Cylinder, lb. (N) . . . . . . . . . . . . . . . . . . . .
10.1 (3073)
9.9 (3021)
8.4 (2567)
13.2 (4016)
8.2 (2489)
13°
180°
190°
21°
5,723 (25,457)
3,764 (16,743)
9.6 (2917)
2.1 (635)
45°
Certifications:
ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SAE J1040 to 9,000 lb.
FOPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ISO 3449 level 1
Transport Data:
Weight w/Loader and Backhoe, lb. (kg). . . . . . . . . . . . . . . . . . . 7,600 (3667)
Overall Height, Backhoe Folded, ft. (mm) . . . . . . . . . . . . . . . . . 8.8 (2725)
Overall Length, Backhoe Folded, ft. (mm) . . . . . . . . . . . . . . . . . 21.7 (6599)
*Theoretical, excludes steering pump horsepower and wet PTO clutch
**Manufacturer’s estimate of power (ISO) per 97/68/EC. Engine horsepower is provided by engine manufacturer for comparison purposes only. Actual operating horsepower will be less.
90
Vertis QCA
1300 19th Street, Suite 200
East Moline, IL 61244
25 Black
50 Black
75 Black
Black
Purchasing Guide
46940 Page 90
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement