Hewlett Packard Enterprise | AF461A | Datasheet | Hewlett Packard Enterprise AF461A uninterruptible power supply (UPS)

R5000 Uninterruptible Power System (UPS)
The innovative Minimally Switched Technology used in the HP R5000 UPS improves the performance over traditional line-interactive
UPS designs while reducing the cost, weight, and size of traditional double-conversion online UPS designs. The digital signal
processing (DSP) enables complete digital control of the UPS resulting in increased power conditioning, lower system cost, and
enhanced user interface interactivity.
DSP technology enables the practical implementation of sophisticated UPS topologies and controls. The DSP can simultaneously
control multiple power converters to optimize system efficiency and other performance characteristics such as: enhanced battery
management for extended battery life, and improved output voltage regulation. The result is a higher performance UPS in smaller,
lighter, more reliable designs-an advantage for space-constrained equipment racks and cost conscious, co-located data center
Front View:
1. Escape Button
2. Scroll up button
Scroll down button
Enter/Select button
Power button
Rear View:
ERM connector for the small plug on the split ERM cable
Load segment 1 circuit breaker (controls the C19 and C13
receptacles, but does not control the large output
Load segment 1 (two IEC-320-C19 receptacles, two IEC320-C13 receptacles)
Cord retention clip attachment locations
Load segment 2 (two IEC-320-C19 receptacles and two
IEC-320-C13 receptacles)
REPO port
USB communications port
Serial communications port
HP UPS Network Module (included)
10. Ground bonding screw
11. Input power line cord with NEMA L6-30 plug (NA/JPN) or
IEC-309-32A plug (INTL)
12. Load segment 2 circuit breaker
13. Large output NEMA L6-30R receptacle (NA/JPN) or IEC309-32A receptacle (INTL) associated with load segment 1
14. ERM Connector for large plug
DA - 14109
Worldwide — Version 3 — October 7, 2011
Page 1
R5000 Uninterruptible Power System (UPS)
NOTE: #0D1 will appear after the part number on the sales order if HP factory integration is indicated.
HP R5KVA 3U IEC309-32A High Voltage INTL Uninterruptible Power System
HP R5KVA 3U L630 High Voltage NA/JP Uninterruptible Power System
Kit Contents
HP UPS R5000
HP UPS Network Module
Power Products Documentation CD
Depth adjustable fixed rack mounting rails, mounting brackets, cord retention clips
Communications cable
Two 10 Amp IEC to IEC jumper cords
DA - 14109
Worldwide — Version 3 — October 7, 2011
Page 2
R5000 Uninterruptible Power System (UPS)
Standard Features
Key Features
High power density with 5000VA/4500 Watts of power packed in just 3U rack space
Greater system uptime with support for Extended Runtime Modules (ERM)
Easy configuration through enhanced front panel display
Enterprise-wide intelligent manageability with bundled UPS Network Module and HP Power
Protector software
More efficient voltage regulation with revolutionary Digital Signal Processing technology
Ultimate long-term battery reliability with HP Enhanced Battery Management
Enhanced system flexibility with two independently controlled load segments
Support for Remote Emergency Power Off (REPO) circuitry
Easy serviceability through modular design
Hot-Swappable Battery
Backed by a three year warranty with the first year including parts and labor. HP's Pre-Failure
warranty, and a $250,000 load protection guarantee*. (Certain restrictions and exclusions apply;
*Load protection guarantee available in North America only.)
Optional Extended Runtime Modules (ERM) increase batter runtime during a power failure
3U Power Packed Design Rated near unity at 5000VA / 4500W, the HP UPS R5000 packs more power in space-conserving rackmount design, allowing you to support more critical equipment in your rack.
Increase System Uptime
with Extended Runtime
The Extended Runtime Modules are rack mounted battery modules that occupy 3U (5.25 inches) of rack
space. The HP UPS R5000 supports up to four Extended Runtime Modules (ERM), which extends your
overall battery runtime.
Lower Cost of Ownership The HP UPS R5000 utilizes a new industry-leading technology that continually conditions and regulates
with Innovative
power without using the battery, thereby increasing the life of the battery. The output voltage is
automatically regulated, based on the connected load and the input voltage.
Investment Protection with HP UPS R5000 incorporates Enhanced Battery Management: an exclusive, patented technology that
HP Enhanced Battery
doubles battery service life, optimizes battery recharge time, and provides advance notice of pending
battery failure. With Enhanced Battery Management, you can save 2-3 battery replacements over the life
of the UPS saving hundreds of dollars giving you a lower total cost of ownership while still receiving the
power protection for your critical equipment.
Enhanced Flexibility
Four C13 outlets, four C19 outlets, and a L6-30 outlet (32A IEC on the International model) provide a
wide range of connection options. Adding the HP PDU Extension Bars, AF500A, provides additional C13
outlets making the R5000 and extremely flexible UPS for all environments.
Remotely Monitor UPSs on The installed UPS Network Module enables network administrators to remotely monitor UPSs and reboot
the Network
network devices. It provides SNMP functionality, including power event alerts, network power diagnostics,
and remote UPS reboot and testing. Used in conjunction with HP Systems Insight Manager or other
SNMP capable Network Management Software, power-related problems on the network are quickly
discovered and remedied.
DA - 14109
Worldwide — Version 3 — October 7, 2011
Page 3
R5000 Uninterruptible Power System (UPS)
Standard Features
Easy Configuration via
Enhanced Front Panel
LCD system integrated into the front panel with five button controls (three buttons for UPS power control
and one button under the front bezel for configuration)
Controllable Load
With two load segments, you have the flexibility to configure scheduled startups and shutdowns, in
addition to independently control the separate load segments. Working in conjunction with HP UPS
Management Module, the HP UPS R5000 can be configured to extend the runtime for more critical
Ease of Maintenance with The UPS R5000 is modular in design, and both the battery and the electronics modules are hot
Hot-Swappable Batteries swappable. HP UPSs are designed with simple access through the front panel. Users can safely install
and Electronics Modules new batteries and even the electronics module without ever powering down connected server and server
Extended Runtime Module The UPS R5000 supports up to four Extended Runtime Modules. Each module is 3U (5.25 inches), a rack
(ERM), R5000
mountable battery module that extends your overall battery runtime.
HP Quality
HP's hardware qualification is the toughest in the industry. Extensive evaluation, testing, product
improvement, and an unsurpassed warranty guarantee the highest level of system protection, electrical
performance, product quality and compatibility.
Compatible with all HP servers, storage, racks, rack options, and other rack mountable HP equipment.
For PDU options please refer to the UPS/PDU compatibility matrix on http://www.HP.com/ups.
The HP UPS R5000 is covered by a three year warranty, with the first year including parts and labor.
Also, standard on all HP UPS units, is our exclusive Pre-Failure Warranty, which extends the advantage of
a HP three-year, limited warranty by applying it to the battery before it actually fails. This warranty is
offered worldwide. Specifically, the Pre-Failure Battery Warranty ensures that when customers receive
notification from HP Power Management Software that the battery may fail, the battery is replaced free of
charge under the warranty.
All HP Rackmount UPSs are also automatically covered to the full service level of ProLiant Care Packs in
the same rack so there is no need to purchase additional Care Packs for the UPSs. Batteries are not
covered under Care Pack Coverage
NOTE: $250,000 Computer/Load Protection Guarantee is also provided in NA, in addition to the HP
three year, limited warranty.
DA - 14109
Worldwide — Version 3 — October 7, 2011
Page 4
R5000 Uninterruptible Power System (UPS)
Service and Support
Service and Support
HP Technology Services
HP Technology Services offers you consultants and support experts to solve your most complex
infrastructure problems. We help keep your business running, boost availability and avoid downtime.
Protect your business beyond warranty with HP Care Pack Services
When you buy HP Options, it's also a good time to think about what level of service you may need. HP
Care Pack services provide total care and support expertise with committed response choices designed to
meet your IT and business need.
Recommended HP Care Pack Services for optimal satisfaction with your HP product
Recommended Services 3-Year HP 24x7 4 hour Response, Hardware Support Onsite Service
Provides you with rapid remote support and if required an HP authorized representative who will arrive
on site any time and day of the year to begin hardware maintenance service within 4 hours of the service
request being logged.
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage devices and networking
options to assist you in bringing your new hardware into operation in a timely and professional manner
Related HP Care Pack Services to enhance your HP product experience
Related Services
3-Year HP 6 hour Hardware Support Onsite Call-to-Repair Service
Provides an IT manager with a team of support specialists who will quickly begin troubleshooting the
system to help return the hardware to operating condition within 6 hours of the initial service request to
the HP Global Solution Center
Insight Remote Support
Parts and materials
HP Proactive Select Service
Provides a flexible way to purchase HP best-in-class consultancy and technical services. You can buy
Proactive Select Service Credits when you purchase your hardware and then use the credits over the next
12 months. http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA2-3842ENN
Delivers secure remote monitoring and support for HP servers and storage, 24x7 at no additional cost.
Available as part of HP Warranty, Care Pack and Service Contract offers.
HP will provide HP-supported replacement parts and materials necessary to maintain the covered
hardware product in operating condition, including parts and materials for available and recommended
engineering improvements. Supplies and consumable parts will not be provided as part of this service;
standard warranty terms and conditions apply. Parts and components that have exceeded their maximum
supported lifetime and/or the maximum usage limitations as set forth in the manufacturer's operating
manual or the technical product data sheet will not be provided, repaired or replaced as part of this
For ProLiant servers and storage systems, this service covers HP-branded hardware options qualified for
the server, purchased at the same time or afterward, internal to the enclosure, as well as external
monitors up to 22" and tower UPS products; these items will be covered at the same service level and for
the same coverage period as the server unless the maximum supported lifetime and/or the maximum
usage limitation has been exceeded. Coverage of the UPS battery is not included; standard warranty
terms and conditions apply.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
replaced by HP due to malfunction. It does not apply to any exchange of Disk or SSD/Flash Drives that
have not failed. SSD/Flash Drives that are specified by HP as consumable parts and/or that have
exceeded maximum supported lifetime and/or the maximum usage limit as set forth in the manufacturer's
DA - 14109
Worldwide — Version 3 — October 7, 2011
Page 5
R5000 Uninterruptible Power System (UPS)
Service and Support
For more information
operating manual or the technical data sheet are not eligible for the defective media retention service
feature option.
To learn more on services for HP ESSN Options, please contact your HP sales representative or HP
Authorized Channel Partner. Or visit: http://www.hp.com/services/proliant or
DA - 14109
Worldwide — Version 3 — October 7, 2011
Page 6
R5000 Uninterruptible Power System (UPS)
Related Options
HP UPS Options
HP Care Pack
HP R5KVA and R7KVA 3U Extended Runtime Module
NOTE: #0D1 will appear after the part number on the sales order if HP factory
integration is indicated.
HP Install Universal Power Supply 3KVA to Below 6KVA Service
DA - 14109
Worldwide — Version 3 — October 7, 2011
Page 7
R5000 Uninterruptible Power System (UPS)
UPS Model Matrix
High Voltage Models
Part Number
Voltage Settings
200/208*, 220,
230, 240
Power Out
220, 230*, 240
Input Connection Output Connection
L6-30P, 3m cord LS1: 15A CB - 2 x C19 + 2 x C13
LS2: 15A CB - 2 x C19 + 2 x C13
Plus one pigtailed receptacle (LS1)
1 x L6-30R for NA/JPN model
IEC-309 32Amp, LS1: 15A CB - 2 x C19 + 2 x C13
3m cord
LS2: 15A CB - 2 x C19 + 2 x C13
Plus one pigtailed receptacle (LS1)
1 x IEC-309 32Amp for Int'l model
* Factory default setting.
DA - 14109
Worldwide — Version 3 — October 7, 2011
Page 8
R5000 Uninterruptible Power System (UPS)
Estimated Backup Times Chart (Minutes)
Average Batter Runtime
Load (Percent*)
(Percent )
With Internal batteries
With One Extended Runtime
With Four Extended Runtime
Module (Minutes)
Modules (Minutes)
NOTE: Backup times are estimated for typical applications. Actual performance will depend on load and battery conditions.
DA - 14109
Worldwide — Version 3 — October 7, 2011
Page 9
R5000 Uninterruptible Power System (UPS)
Technical Specifications
Unit Dimensions (HxWxD)
Shipping Dimensions
Unit Weight
Shipping Weight
BTU Break Down
Electrical Input
5 5 in (12.7 cm) x 17.2 in (43.7 cm) x 29.3 in (74.4 cm)
14.4 in ( 36.58 cm) x 23.6 in ( 60 cm) x 38.78 in ( 98.5 cm)
126 lbs (57kg)
192 lbs ( 87 kg)
BTU On Line
BTU On Battery
Battery String Voltage
Battery Type
Battery Quantity
Voltage Range
Input Plug
Electrical Output
Online Efficiency
Online Regulation
On battery Regulation
Voltage Wave Form
Output Protection
Extended Batteries
Backup Time
Recharge Time
Battery String Voltage
Battery Type
Battery Quantity
LED Indicators
Environmental and Safety Operating Temperature
Transit Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Operating Altitude
Transit Altitude
Audible Noise
Safety Markings
DA - 14109
478 all models
846 INTL, 1041 NA/JPN
12V 27W
160-253V at 200/208V nominal; 176-253V at 220, 230, and 240V
50/60 Hz
Part number AF460A: L6-30P, 3m cord
Part number AF461A: IEC-309 32Amp, 3m cord
Remote Emergency Power-Off disables AC power to load
-10% to +6% of nominal voltage
±5% of nominal voltage
Sine wave
See Model Selection Matrix; divided into 2 Load Segments
Re-settable circuit protectors
Maintenance-free, sealed, valve-regulated lead acid (VRLA)
Up to four ERMs supported
See Backup Times Chart
<3 hours to 80% usable capacity; <48 hours for complete recharge
12V 27W
LCD and switch membrane integrated into the front panel; with five-button
control (four buttons for UPS power control and one button under the front
bezel for configuration).
50° to 104° F (10° to 40° C )
-13° to 131° F (-25° to 55° C)
32° to 77° F (0° to 25° C )
20% to 80% (non-condensing)
5% to 95%
Up to 6,60 ft (2000 m) above sea level
49,000 ft (15,000 m) above sea level
<45db (in normal operation)
Int'l: GS, CE, GOST
Worldwide — Version 3 — October 7, 2011
Page 10
R5000 Uninterruptible Power System (UPS)
Technical Specifications
Safety Certifications
EMC Markings
Products and Approach
End-of-life Management
and Recycling
UL1778, UL60950-1; CSA22.2 No.107.3, No.60-1950; EN50091-1-1;
EN60950-1 IEC62040-1-1
Int'l: BSMI, C-Tick, CISPR
FCC CFR 47, Part 15 Class A, EN50091-2
IEC 801-2, IEC 801-3, IEC 801-4, IEC 801-5
Meets NEC code 645-11 intent and UL requirements
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to:
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green. These instructions may
be used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
© Copyright 2011 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
DA - 14109
Worldwide — Version 3 — October 7, 2011
Page 11
Download PDF