Fluke 1555 and 1550C Insulation Resistance Testers

Fluke 1555 and 1550C Insulation Resistance Testers
TECHNICAL DATA
Fluke 1660 Series
Multifunction Installation Testers
Reduce test time up to 40 % with Auto Test
Auto Test does 5 required installation tests in one sequence, including
selectable Type A, AC & RCD Auto Test, ensuring compliance with local
installation regulations. It reduces the number of manual connections,
decreases the possibility of making errors and reduces test time up to
40 % from previous Fluke models.
Insulation PreTest
Protect the installation. Avoid costly mistakes.
3
The new Fluke 1660 Series Installation
Testers are the only installation testers
that help prevent damage to connected
appliances and also allow users to
send test results wirelessly via smartphone
directly from the field.
FLUKE CONNECT COMPATIBLE
(1664 FC ONLY)
View test results on your smartphone
via Fluke Connect® mobile app and Data
Management Software (Fluke DMS, sold
separately). Download the free Fluke
Connect app to enable wireless data
transmission and Fluke Cloud™ storage.
INSULATION PRETEST
(1664 FC ONLY)
The new Fluke 1660 Series Installation
Testers are the only installation testers
that help prevent damage to connected
appliances.
AUTO TEST SEQUENCE
(1664 FC ONLY)
Start a sequence of seven critical tests
with one press of the TEST button.
HEAVY DUTY,
SINGLE INPUT LINE CORD
Guards against failures in the field.
WARRANTY
Three-year standard warranty.
The Fluke 1664 FC Installation Tester is the only installation with
“Insulation PreTest,” which warns you about potentially serious and
costly mistakes. If the tester detects that appliances are connected to
the system during test, it will stop the insulation test and provide a
visual and audible warning. This helps eliminate accidental damage to
peripheral equipment and keeps your customers happy.
Fluke Connect®, ShareLive™ calling and Fluke Cloud™
storage
Share from anywhere
Save time—eliminate data entry by wirelessly syncing measurements
directly from your installation tester and share with your team using
the Fluke Connect system. Having access to measurements simultaneous at the inspection site and from the office or an off-site location
enables faster decision making and real time collaboration between
team members.
Fluke Cloud™ storage
Retrieve stored results from anywhere
Cloud storage allows you to retrieve stored results whether you are in
the office or in the field to make decisions in real time. Fluke Connect
uses radio-enabled test tools and a mobile app to transfer measurements straight from the field to a secure cloud location, where the data
can be accessed by team members. Plus you can import the data into
Fluke DMS to process and generate certificates.
Key product capabilities
The 1660 Series testers verify the safety of electrical
installations in domestic, commercial and industrial
applications. They can ensure that fixed wiring is
safe and correctly installed to meet the requirements
of IEC 60364 and all relevant local standards.
Fluke 1664 FC
The Fluke 1664 FC is the only installation tester that
protects connected appliances from damage during
insulation tests, and allows you to share your test
results wirelessly by smartphone with coworkers or
customers. Fluke’s patent pending Insulation PreTest
stops you from performing tests with appliances that
are connected to the system during test. This helps
eliminate accidental damage and keeps your customers happy.
In addition, the Fluke 1664 FC offers you the power
of Fluke Connect. Now you can send test results
straight from your Fluke 1664 FC to your smartphone,
and transmit those results to other members of your
team. You can get feedback, suggestions and even
have work orders sent to your job site.
You can also save your test results to Fluke Cloud™
storage. No more writing down data on paper with
the possibility of transcription errors. Cloud storage
gives you a fast, secure and accurate way to storing
all your test data and create test certificates with
Fluke DMS.
Fluke 1663
The ideal tester for professional trouble-shooters.
This instrument is ideal for professional users–highend functionality, advanced measurement capability,
yet it is still easy to use. Operation is intuitive and
easily mastered by all levels of field workers.
Fluke 1662
A solid, basic installation tester. The Fluke 1662 gives
you Fluke reliability, simple operation and all the
testing power you need for basic installation testing.
Features by model
Measurement function
1662
1663
1664 FC
Insulation-PreTest™ safety function NEW
•
Insulation at L-N, L-PE, N-PE inputs NEW
•
Auto Test sequence NEW
•
Loop and line resistance—mΩ resolution
•
Continuity at L-N, L-PE, N-PE inputs NEW
•
•
Test smooth dc sensitive RCDs (Type B/B+)
•
•
Earth resistance
Voltage trms (ac and dc) and frequency
•
•
•
•
•
Wiring polarity checker, detects broken PE and N wires
•
•
•
Insulation resistance
•
•
•
Continuity and resistance
•
•
•
Measure motor windings with continuity test (@ 10 mA)
•
•
•
Loop and line resistance
•
•
•
Prospective Earth Fault Current (PEFC/IK)
•
•
•
Prospective Short-Circuit Current (PSC/IK)
•
•
•
RCD trip time
•
•
•
RCD trip current (ramp test)
•
•
•
Measures trip time and current for RCD type A and AC in one test
•
•
•
RCD variable test current
•
•
•
Automatic RCD test sequence
•
•
•
Phase sequence test
•
•
•
2 Fluke Corporation
1660 Series Multifunction Installation Testers
Other features
1662
1663
1664 FC
Fluke Connect® compatibility NEW
•
ShareLive ™ calling NEW
•
Fluke Cloud™ storage NEW
•
On/Off switchable Auto Start for RCD and Looptest NEW
•
•
•
Self-test
•
•
•
Illuminated display
•
•
•
•
•
Memory, interface
Z Max memory NEW
Memory
•
IR-USB and BLE interface (use with optional Fluke DMS software and FVF)
•
•
IR-USB
IR-USB/BLE
Included Accessories
Heavy duty mains cord with single input connector NEW
•
•
•
Hard case
•
•
•
Remote control probe
•
•
•
Zero adapter
•
•
•
General specifications
Specification
Characteristic
Size
10 cm (L) x 25 cm (W) x 12.5 cm (H)
Weight (incl. batteries)
approx. 1.3 kg
Battery size, quantity
1.5 V type AA (IEC LR6), 6 pcs.
Sealing
IP 40
Safety
Complies with IEC/EN61010-1, UL61010, ANSI/ISA –s82.02.01 and
CAN/CSA c22.2 No. 1010
Overvoltage
CAT III 500 V, CAT IV 300 V
Performance
EC/EN61557-1 to IEC/EN61557-7 and IEC/EN61557-10
AC and DC voltage measurement trms
Range
Resolution
Input Impedance
Overload Protection
500 V
0.1 V
3.3 MΩ
660 V rms
Continuity testing (RLO)
Range (Autoranging)
20 Ω/200 Ω/2000 Ω
Resolution
Open Circuit Voltage
0.01 Ω/0.1 Ω/1 Ω
>4V
Insulation resistance measurement (RISO)
Test voltages
1662
1663/1664 FC
100-250-500-1000 V
50-100-250-500-1000 V
3 Fluke Corporation
1660 Series Multifunction Installation Testers
Test Voltage
Insulation Resistance Range
Resolution
Test Current
50 V
20 MΩ/50 MΩ
0.01 MΩ/0.1 MΩ
1 mA @ 50 kΩ
100 V
20 MΩ/100 MΩ
0.01 MΩ/0.1 MΩ
1 mA @ 100 kΩ
250 V
20 MΩ/200 MΩ
0.01 MΩ/0.1 MΩ
1 mA @ 250 kΩ
500 V
20 MΩ/200 MΩ/500 MΩ
0.01 MΩ/0.1 MΩ/1 MΩ
1 mA @ 500 kΩ
1000 V
20 MΩ/200 MΩ/1000 MΩ
0.01 MΩ/0.1 MΩ/1 MΩ
1 mA @ 1 MΩ
Insulation pretest
Insulation safety pretest
Requires to connect the Tester to L, N and PE.
Loop and line impedance (ZI)
Range
Resolution
10 Ω (Hi current mΩ mode)/20 Ω/200 Ω/2000 Ω
1 mΩ/ 0.01 Ω/ 0.1 Ω/1Ω
Prospective earth fault current, PSC test
Range
Resolution
1000 A/10 kA (50 kA)
1 A/0.1 kA
Computation: Prospective Earth Fault Current (PEFC) or Prospective Short Circuit Current (PSC) determined by dividing measured mains
voltage by measured loop (L-PE) resistance or line (L-N) resistance, respectively.
RCD testing, RCD types tested
RCD Type
Model 1662
AC1
G2 ,
1Responds
S3
A/F4,
AC1,
G2 ,
Model 1663/1664 FC
S3
A/F, AC, B/B+5, G, S
to AC. 2General, no delay. 3Time delay. 4Responds to pulsed signal. 5Responds to smooth DC signal.
RCD trip time test (ΔT)
Measurement Range
Current Settings1
Multiplier
RCD Type G
x ½, x 1
310 ms
510 ms
x5
50 ms
160 ms
10-30-100-300-500-1000 mA – VAR
10-30-100 mA
11000
RCD Type S
mA type AC only. 700 mA maximum type A in VAR mode, VAR mode not available for type B.
RCD trip current measurement/ramp test (I ΔN)
Dwell Time
Current Range
Step Size
30 % to 110 % of RCD rated current1
2
10 % of I ΔN
Notes
30 % to 210 % for Type A I ΔN = 10mA
20 % to 210 % for Type B
130 %
Type G
Type S
Measurement Accuracy
300 ms/step
500 ms/step
± 5 %
Specified trip current ranges (EN 61008-1):
50 % to 100 % for Type AC
35 % to 140 % for Type A (>10 mA)
35 % to 200 % for Type A (≤10 mA)
50 % to 200 % for Type B
to 150 % for Type A I ΔN > 10 mA. 25 % for Type B
Earth resistance test (RE) Model 1664 FC and 1663 only
Range
200 Ω/2000 Ω
Resolution
Frequency
Output Voltage
0.1 Ω/1Ω
128 Hz
25 V
Phase sequence indicaton
Icon
Phase Sequence indicator is active
4 Fluke Corporation
1660 Series Multifunction Installation Testers
Range
Display
100 to 500 V
“1-2-3”: or “3-2-1”
Included Accessories
6x AA (IEC LR6) cell batteries,
C1600 hard carrying case, zero
adapter, heavy duty mains cord,
STD standard test lead set,
padded carrying and waist strap,
quick reference guide, TP165X
remote control probe and lead set
(FTP/UK fused probes, UK only),
User’s manual on CD-ROM
Ordering Information
Fluke 1664 FC Multifunction
Installation Tester with Auto Test,
Insulation PreTest, Fluke
Connect® compatibility
Fluke 1663 Multifunction
Installation Tester
Fluke 1662 Multifunction
Installation Tester
Preventive maintenance simplified. Rework eliminated.
Save time and improve the reliability of your maintenance data by
wirelessly syncing measurements using the Fluke Connect® system.
• Eliminate data-entry errors by saving measurements directly from the
tool and associating them with the work order, report or asset record.
• Maximize uptime and make confident maintenance decisions with data
you can trust and trace.
• Access baseline, historical and current measurements by asset.
• Move away from clipboards, notebooks and multiple spreadsheets with
a wireless one-step measurement transfer.
• Share your measurement data using ShareLive™ video calls and emails.
• Fluke 1664 FC is part of a growing system of connected test tools
and equipment maintenance software. Visit the website to learn more
about the Fluke Connect® system.
Find out more at flukeconnect.com
All trademarks are the property of their respective owners. WiFi or cellular service required to share
data. Smartphone, wireless service and data plan not included with purchase. First 5 GB of storage is
free. Phone support details can be viewed at fluke.com/phones.
Smartphone wireless service and data plan not included with purchase.
Fluke Connect® is not available in all countries.
Fluke. Keeping your world up and running.®.
Fluke Corporation
PO Box 9090, Everett, WA 98206 U.S.A.
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
Modification of this document is not
permitted without written permission
from Fluke Corporation.
5 Fluke Corporation
1660 Series Multifunction Installation Testers
For more information call:
In the U.S.A. (800) 443-5853 or
Fax (425) 446-5116
In Europe/M-East/Africa +31 (0)40 267 5100 or
Fax +31 (0)40 267 5222
In Canada (800)-36-FLUKE or
Fax (905) 890-6866
From other countries +1 (425) 446-5500 or
Fax +1 (425) 446-5116
Web access: http://www.fluke.com
©2016 Fluke Corporation.
Specifications subject to change without notice.
Printed in U.S.A. 4/2016 6004616a-en
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement