ILD500 Professional Loop Driver (6.4 Amps) - AV-iQ

ILD500 Professional Loop Driver (6.4 Amps) - AV-iQ
ILD500
Professional Loop Driver (6.4 Amps)
Configurations
ILD500 Professional Loop
Driver (6.4 Amps)
The ILD500 is a professional audio induction loop driver capable of driving loop areas in excess of 7530 sqft. (700
m²) with an unsurpassed clarity of sound for both music and speech for superior intelligibility. Based on proven and
highly reliable technology it is backed by a 5 year warranty and Listen technical support. Improved power output
provides outstanding value without compromise. It boasts all the usual features such as metal loss correction and
is compatible with our unique Ultra-low Spill™ technology. The ILD500 is a compact and elegant unit suitable for
freestanding, wall mounting or rack mounting.
Includes
Highlights
• Area coverage to 7530 sqft. (700 m²)
• Low lifetime cost
• Excellent proven reliability
• 5 year warranty
One (1) ILD500 Professional Loop Driver (6.4 Amps)
One (1) Rack Mount Bracket
One (1) “T” Logo Installed Adhesive Sign - Large (11.7” x 8.3”)
One (1) Line Cord (North America)
One (1) Neutrik NL4 Speakon Connector
One (1) Handbook and Installation Instructions
• Unparalleled sound quality and intelligibility
• Automatic gain control optimized for speech
Used With
• High voltage headroom avoids high frequency
clipping
FB1.8 Flat Insulated Copper Cable 164 ft. (50 m)
DBC2.5-100 Direct Burial Cable 328 ft. (100 m)
DBC2.5-200 Direct Burial Cable 656 ft. (200 m)
WMF-1U Wall Mount Brackets for ILD500 or ILD1000G
LA-25 One-Day Installation and Commissioning Training Class
LA-26 One-Day Installation and Commissioning Training – On Site
LA-30 Basic Design Charge
LA-31 Advanced Design Charge
Architectural Specifications
The audio inductive loop driver shall continuously deliver 6.4 A (RMS) when excited with a continuous 1 kHz sine wave. It shall
cover an area of at least 7530 sqft. (700 m²) with a room aspect ratio 3:1 according to IEC 60118-4:2006 standard. The driver
shall have a frequency response of at least 80 Hz to 6.5 kHz +/- 3 dB with THD+N less than 0.2%. The unit shall incorporate audio
processing to maximize the intelligibility for individuals with a t-coil hearing aid. The unit shall incorporate metal loss correction
to rectify frequency caused adjacent metal structures. The unit shall occupy one rack space and rack mount brackets shall be
included. The ILD500 Professional Loop Driver is specified.
Listen Technologies Corporation • 14912 Heritagecrest Way • Bluffdale • Utah 84065-4818 U.S.A.
+1.801.233.8992 • 1.800.330.0891 North America • +1.801.233.8995 Fax
© 2012 Ampetronic and © Listen Technologies Corporation All rights reserved 122612
ILD500 Page 1
ILD500 Professional Loop Driver (6.4 Amps)
ILD500 Specifications*
Audio
Perimeter Loop
Coverage
Cable Length
Low Spill System
Inputs
Outputs
Other
Physical
Frequency Response
80 Hz to 6.5 kHz ±3 dB
Distortion
THD+N <0.2 %, 1 kHz Sine Wave at Full Current
AGC
Optimized for Speech, Dynamic Range >36 dB
Gain Control
Front recessed input level control
Metal Loss Correction
Correct system frequency response due to metal structures
1:1 Aspect Ratio
4,520 sgft. (420 m²)
2:1 Aspect Ratio
5,650 sgft. (525 m²)
3:1 Aspect Ratio
7,530 sgft. (700 m²)
Condition 1
Loop must be 3-6 ft. (1-2 m) above or below the receiver height
Condition 2
There should be no metal structures in the plane of the loop
Condition 3
There must be sufficient voltage to drive the loop
10 AWG Copper
Max distance at full current - 392 ft. (119 m)
14 AWG Copper
Max distance at full current - 363 ft. (111 m)
18 AWG Copper
Max distance at full current - 247 ft. (75 m)
22 AWG Copper
Max distance at full current - 137 ft. (42 m)
FB1.8 Flat Copper Tape
Max distance at full current - 482 ft. (147 m)
Required to Achive Low Spill
One (1) SP5 90° Audio Phase Shifter, Two (2) ILD122 Loop Drivers and Array Design
Array Design
Provided or checked by Listen
Spill Distance from Edge of Room
-40 dB at 5 ft. (1.5 m)
Power
230/115 VAC, 84W, 45-65 Hz, Power Switch/Led on Front Panel
Power Certification
ETL Listed
Microphone Input
XLR Balanced, -70 dBu Input, 200-6000 Ohms, +15 VDC Phantom Power
Line Input
1/4 in. (6.4 mm), -30 dBu Input, Overload Protected
Slave I/O
1/4 in. (6.4 mm), Insert Point for SP5 90° Audio Phase Shifter, 0 dBu
Drive Voltage
14.1 V (RMS) at Maximum Ouput Current
Drive Current
6.4 A (RMS), 9.0 A (Peak) with 1 kHz Sine Wave
Drive Current Peaks
Short Term >13 A
Drive Current Indication
6-LED Display Front Panel, 2 dB Increments
Loop Connector
Neutrik NL4 Speakon
Fault Monitoring
LED Fault Indicators, Overload, Overhead, Loop Error
Remote Fault Monitoring
Relay Contacts
Ancillary
± 15 VDC, 0.15 A, Power Outlet to Power Accessories
Cooling
Forced Ventilation, Air Intake on Left Panel, Air Ejection at Rear
Dimensions (WxDxH)
1 RU in 19 in. Rack, 16.9 x 8.7 x 1.7 in. (430 x 220 x 44 mm)
Mounting Options
Freestanding
Weight
8.4 lbs. (3.75 kg)
Environment
IP20 Protection, 20 to 90% Relative Humidity, 32 F (0 C) to 95 F (35 C)
*Specifications are subject to change without notification.
Listen Technologies Corporation • 14912 Heritagecrest Way • Bluffdale • Utah 84065-4818 U.S.A.
+1.801.233.8992 • 1.800.330.0891 North America • +1.801.233.8995 Fax
© 2012 Ampetronic and © Listen Technologies Corporation All rights reserved 122612
ILD500 Page 2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement