OPERATIONS MANUAL Valen 24V4A Battery Charger
1300 734 253 [email protected]
1300 734 253
[email protected]
www.regalelectro.com.au
THE REGAL ELECTRO TEAM ON:
FOR FURTHER TECHNICAL SUPPORT PLEASE CONTACT
POWER LED (RED) IS NOT ON:
Check whether the plug socket (AC) is connected and turned on at
the wall socket. If yes, and the indicator does not shine, please
return charger to supplier.
CHARGING LED (ORANGE) LIGHT IS NOT ON:
1. Check whether output connector of charger is correctly
connected to the mobility scooter.
2. If the green LED indicator light is on, then the batteries are fully
charged.
3. If neither orange or green LED indicator light is on, the charger is
likely to be defective. Please return to REGAL ELECTRO for further
trouble shooting.
CHARGING LED INDICATOR (ORANGE) LIGHT HAS NOT TURNED
TO GREEN:
1. The battery is still charging,
2.After 24hrs, it’s the orange LED indicator light still hasn’t gone
green, then the batteries are defective and should be returned to a
service centre.
CHARGING LED INDICATOR (ORANGE) LIGHT TURNS TO GREEN
IMMEDIATELY:
1. Make sure the battery is fully charged.
2. If not, battery is likely to be defective. Please return battery set
to battery supplier.
Valen 24V4A Battery Charger
OPERATIONS MANUAL
TROUBLE SHOOTING:
SPECIFICATION:
MODEL
INPUT AC VOLTAGE
OUTPUT DC VOLTAGE
OUTPUT CURRENT
LED INDICATOR
OPERATING TEMPERATURE
OPERATING HUMIDITY
STORAGE TEMPERATURE
USED BELOW THE ALTITUDE
DIMENSIONS
WEIGHT
OPERATING INSTRUCTION:
BC VFC2404
230VAC
27.6V – 28.8V (24V Nominal)
4A
Power/On = Red
Charging = Orange
Full Charge = Green
Error = LED Flashing or no light
0°C - 40°C
20% - 85%RH
-20°C - 70°C
3000M
180 (L) x 93 (W) x 53mm (H)
0.83kg
1.
2.
3.
4.
5.
6.
PRODUCT INFORMATION:
Valen Chargers have been designed, manufactured and tested to
Australian and New Zealand standards. Giving you the peace of mind
that they will perform to expectations.
Our Valen 24V Battery Charger range have their algorithm set for Gel
technology batteries, such as Regal Electro’s Valen GEL range. This
ensures that your mobility Scooter or Electric Wheelchair batteries are
well cared for delivering maximum battery life. All the 24V Battery
Chargers come standard with a 1.8m power cable and XLR (cannon) plug
for ease of use.
7.
Turn off the Power Chair or Mobility Scooter.
Ensure the output voltage of the charger is compatible to the
voltage of the batteries.
Connect the battery charger cannon plug to the charge port of
the Mobility Scooter or Power Chair. Ensure that the connector
fits firmly into the socket and locks into place.
Connect the AC power cord on the charger. Once the charger
has power to it, the red LED indicator light will turn on.
When the charging starts, the orange LED indicator light will
turn on. Do not leave the scooter until the charging light turns
on. The fan may not turn on immediately, this does not mean
the charger isn’t working.
Once the charger light goes green, this does not mean that the
battery is fully charged. Please leave the charger connected
when the scooter isn’t in use. It’s not recommended to use the
scooter unless the charger light has gone green and been
green for at least 2-3 hours.
The charger is a smart charger, it will not over charge your
batteries. For ultimate battery life, its suggested that you leave
the charger connected at all times when the scooter is not in
use. The battery charger will maintain the battery at 100%
state of charge.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement