Hot Dog Bun Warmer - Star Manufacturing

Hot Dog Bun Warmer - Star Manufacturing
DRAWER ROLL/
BUN WARMER
MODEL
SST-20
SST-30
SST-50, SST-50ND
SST-75
Installation and
Operation
Instructions
2M-Z3235 Rev. J 1/12/2015
IL1889
SST-75
French: RÉCHAUD À TIROIR POUR PETITS PAINS
Spanish: CAJON CALENTADOR PARA PANECILLOS Y PANES
1
SAFETY SYMBOL
These symbols are intended to alert the user to the presence of
important operating and maintenance instructions in the manual
accompanying the appliance.
RETAIN THIS MANUAL FOR FUTURE REFERENCE
NOTICE
Using any part other than genuine Star factory supplied parts relieves the
manufacturer of all liability.
Star reserves the right to change specifications and product design without
notice. Such revisions do not entitle the buyer to corresponding changes,
improvements, additions or replacements for previously purchased
equipment.
Due to periodic changes in designs, methods, procedures, policies and
regulations, the specifications contained in this sheet are subject to change
without notice. While Star International Holdings Inc., Company exercises
good faith efforts to provide information that is accurate, we are not
responsible for errors or omissions in information provided or conclusions
reached as a result of using the specifications. By using the information
provided, the user assumes all risks in connection with such use.
MAINTENANCE AND REPAIRS
Contact your local authorized service agent for service or required maintenance.
Please record the model number, serial number, voltage and purchase date in the area below and have it ready when
you call to ensure a faster service.
Model No.
Authorized Service Agent Listing
Reference the listing provided with the unit
or
Serial No.
Voltage
Purchase Date
for an updated listing go to:
Website:
E-mail
www.star-mfg.com
[email protected]
Service Help Desk
Business
Hours:
8:00 am to 4:30 p.m. Central Standard Time
Telephone:
(314) 678-6303
Fax:
(314) 781-2714
E-mail
[email protected]
[email protected]
[email protected]
Website:
www.star-mfg.com
Mailing Address: Star International Holdings Inc., Company
10 Sunnen Drive
St. Louis, MO 63143
U.S.A
2
2
GENERAL INSTALLATION DATA
CAUTION
This equipment is designed and sold for commercial use only by personnel trained and experienced
in its operation and is not sold for consumer use in and around the home nor for use directly by the
general public in food service locations.
Before using your new equipment, read and understand all the instructions & labels associated with
the unit prior to putting it into operation. Make sure all people associated with its use understand the
units operation & safety before they use the unit.
All shipping containers should be checked for freight damage both visible and concealed. This
unit has been tested and carefully packaged to insure delivery of your unit in perfect condition. If
equipment is received in damaged condition, either apparent or concealed, a claim must be made
with the delivering carrier.
Concealed damage or loss - if damage or loss is not apparent until after equipment is unpacked, a
request for inspection of concealed damage must be made with carrier within 15 days. Be certain to
retain all contents plus external and internal packaging materials for inspection. The carrier will make
an inspection and will supply necessary claim forms.
INSTALLATION
This bun warmer is equipped for the voltage shown on the nameplate. It will operate on alternating
current only; however, the correct voltage must be applied. The unit should be installed by a qualified
installer.
DO NOT CONNECT TO DIRECT CURRENT (DC).
2M-Z3235; SST Series Drawer Roll / Bun Warmer
WARNING
GENERAL OPERATING PROCEDURES
Using the power switch, turn the unit on. The pilot light on the front of the unit will indicate when the
power is on. Select a setting on the thermostat for warming or holding rolls.
To keep the rolls soft and fresh, turn the control knob to a low position. Higher settings should be
used only for short periods or preheating the warmer. Keep the drawers as full as possible. When
adding new rolls to the drawer, pull the rolls and buns that are left in the drawer toward the front and
use them first, giving time for the new rolls to become heated. Do not heat the rolls more than once,
as they will not be palatable if reheated. If the rolls dry out, reduce temperature.
NOTE: This unit may smoke and have a slight odor when first used. We suggest you
turn the thermostat to a high heat position and let unit heat for approximately two (2) hours
before using.
ELECTRICAL CONNECTIONS
WARNING
For your protection, this appliance is equipped with a 3-conductor cord with a grounding type plug.
Connect only to a grounding receptacle.
Before making any electrical connection to this unit, check that the power supply is adequate for the
voltage, amperage and requirements stated on the rating plate.
A wiring diagram is included herewith.
Disconnect the unit from the power source before installing or removing any parts.
Be absolutely sure that the ground connection for the receptacle is properly wired. Do not connect
equipment to power without proper ground connections. Improper grounding may result in personal
injury or fatality.
DO NOT CUT OR REMOVE THIS PLUG OR GROUNDING PRONG FROM THE PLUG.
WARNING
CONNECT/PLUG UNIT INTO DEDICATED A.C. LINE ONLY SPECIFIED ON THE DATA
PLATE OF THE UNIT.
3
CLEANING
To remove the drawer for cleaning:
1. Pull the drawer out until it stops.
2. Remove the interior pan.
3. Grasp the drawer assembly with both hands.
4. Lift the drawer in an upward direction while slowly pulling out.
This will disengage the drawer from the drawer stops. To re-install the drawer, reverse the procedure.
The unit should be cleaned with a damp cloth using a mild detergent or non abrasive cleaner.
Clean the entire unit daily to ensure long life and satisfactory performance as well as to maintain an
attractive appearance. Do not clean with water jet equipment.
MAINTENANCE AND REPAIRS
2M-Z3235; SST Series Drawer Roll / Bun Warmer
Contact the factory, a service representative, or a local service company for service or required
maintenance.
4
DONNÉES D'INSTALLATION GÉNÉRALES
CAUTION
Cet équipement est conçu et vendu pour un usage commercial uniquement par du personnel qualifié
et expérimenté dans son fonctionnement et n’est pas vendu pour l’usage des consommateurs à
l’intérieur et autour de la maison, ni pour l’utilisation directe par les enfants ou le grand public dans
des lieux de services alimentaires.
Avant d’utiliser votre nouvel équipement, lire et comprendre toutes les instructions et les étiquettes
associées à l’appareil préalablement à sa mise en service. S’assurer que toutes les personnes
associées à son utilisation comprennent le fonctionnement et la sécurité de l’appareil avant de
l’utiliser.
Tous les conteneurs d’expédition doivent être vérifiés pour des dommages de transport à la fois
apparents ou cachés. Cet appareil a été testé et emballé avec soin pour assurer la livraison de
votre appareil en parfait état. Si l’équipement est reçu dans un état endommagé, que les dommages
soient apparents ou cachés, une réclamation doit être formulée auprès du transporteur de livraison.
Dommages cachés ou pertes – si les dommages ou la perte ne sont apparents qu’après le
déballage de l’équipement, une demande d’inspection des dommages cachés doit être faite auprès
du transporteur dans les 15 jours. Veillez à conserver tous les contenus ainsi que les matériaux
d’emballage internes et externes pour l’inspection. Le transporteur effectuera une inspection et
fournira les formulaires de réclamation nécessaires.
INSTALLATION
Ce réchaud pour petits pains est équipé pour la tension indiquée sur la plaque signalétique. Il
fonctionne à courant alternatif uniquement; cependant, la tension correcte doit être appliquée.
L'appareil doit être installé par un installateur qualifié..
WARNING
NE PAS CONNECTER AU COURANT CONTINU (CC).
PROCÉDURES GÉNÉRALES D’UTILISATION
2M-Z3235; SST Series Drawer Roll / Bun Warmer
Allumez l'appareil avec l'interrupteur d'alimentation. Le voyant sur le devant de l'appareil indique
lorsque l'appareil est allumé. Sélectionnez un réglage du thermostat pour réchauffer ou maintenir les
petits pains.
Pour garder les petits pains doux et frais, tournez le bouton de commande à une position basse.
Les réglages plus élevés ne doivent être utilisés que pour de courtes périodes ou pour préchauffer.
Gardez les tiroirs aussi pleins que possible. Lorsque vous ajoutez de nouveaux petits pains dans
le tiroir, tirez les petits pains et les brioches laissés dans le tiroir vers l'avant et utilisez ceux-ci les
premiers, donnant ainsi du temps aux nouveaux petits pains de chauffer. Ne chauffez pas les petits
pains plus d'une fois, car ils perdront leur goût agréable. Si les petits pains sèchent, abaissez la
température.
REMARQUE : Cet appareil peut fumer et avoir une légère odeur au départ. Nous
vous suggérons de tourner le thermostat à une position de chaleur haute et laisser
l'appareil chauffer pendant environ deux (2) heures avant de l'utiliser.
BRANCHEMENTS ÉLECTRIQUES
WARNING
Pour votre protection, cet appareil est équipé d'un cordon à 3 conducteurs avec une fiche de mise à
la terre. Connectez uniquement à une prise avec mise à la terre.
Avant d'effectuer tout branchement électrique à cet appareil, vérifiez que l'alimentation est suffisante
pour la tension, l'ampérage et les exigences figurant sur la plaque signalétique.
Un schéma de câblage est fourni ci-joint.
Débranchez l'appareil de la source d'alimentation avant d'installer ou de retirer des pièces.
Il faut absolument s'assurer que le raccordement à la terre de la prise est correctement câblé. Ne
branchez pas l'appareil à l'alimentation électrique sans les raccordements à la terre appropriés. Une
mise à la terre incorrecte peut entraîner des blessures corporelles, voire la mort.
WARNING
NE PAS COUPER NI ENLEVER CETTE FICHE OU BROCHE DE MISE À LA TERRE DE
CETTE PRISE.
CONNECTER/BRANCHER L'APPAREIL À L'ALIMENTATION SECTEUR INDIQUÉE SUR LA
PLAQUE SIGNALÉTIQUE DE L'APPAREIL.
5
NETTOYAGE
Pour retirer le tiroir pour le nettoyage :
1. Tirer le tiroir jusqu'à la butée.
2. Retirer le plateau intérieur.
3. Saisir l'ensemble du tiroir avec les deux mains.
4. Soulever le tiroir vers le haut tout en tirant lentement.
Cela dégagera le tiroir de ses butées. Pour réinstaller le tiroir, inverser la procédure. L'appareil doit
être nettoyé avec un chiffon humide et un détergent doux ou un nettoyant non abrasif. Nettoyez
l’ensemble de l’appareil tous les jours pour en assurer une longue durée de vie et des performances
satisfaisantes, ainsi que pour maintenir une apparence attrayante. Ne pas nettoyer avec des
équipements à jet d’eau.
ENTRETIEN ET RÉPARATIONS
2M-Z3235; SST Series Drawer Roll / Bun Warmer
Contactez l’usine, un représentant de service ou une entreprise de service locale pour le service ou
l’entretien nécessaire.
6
Esta unidad ha sido diseñada y se vende exclusivamente para usos comerciales y para
ser operada por personal debidamente entrenado y experimentado en su operación y
no se vende para uso del consumidor en la casa o alrededor de ella ni para ser usada
PRECAUCION directamente por el público en general en instalaciones de servicio de comidas. Favor
contactar la fábrica para equipos de uso para público en general
INSTALACION
Este equipo está diseñado para operar con el voltaje y número de vatios indicados en la
placa de identificación montada en el respaldo de la unidad, y ha sido diseñado para ser
usado con corriente eléctrica alterna (AC) únicamente.
ADVERTENCIA
No CONECTE A la CORRIENTE CONTINUA (DC).
PROCEDIMIENTOS OPERATIVOS GENERALES
Utilizando el interruptor principal, encienda el equipo. La luz ubicada al frente indica cuando el
equipo esta encendido. Seleccione en el termostato la temperatura deseada para calentar o
conservar los productos.
Para mantener los panecillos y panes suaves y frescos, gire la perilla de control a la posición
de LOW (baja). Temperaturas más altas sólo deberán ser utilizadas por períodos cortos o
para precalentamiento del equipo. Mantenga las gavetas tan llenas como sea posible. Cuando
agregue producto nuevo al equipo, mueva hacia la parte delantera de la gaveta el producto que
ha quedado y utilícelo primero; dando tiempo para que el producto nuevo tome la temperatura
deseada. No caliente los panes más de una vez, ya que no quedaran tan agradables y sabrosos
si se recalientan. En caso de que se estén resecando, reduzca la temperatura.
Instrucciones para el cable y la conexión a tierra.
2M-Z3235; SST Series Drawer Roll / Bun Warmer
Para su protección, este equipo incluye un cable de 3 conductores con un conector el cual tiene el
dispositivo para su conexión a tierra. Conéctelo solamente a un receptor provisto con la conexión
a tierra.
Nota: Esta unidad puede generar humo y un ligero olor cuando se utilice por vez primera.
Le sugerimos colocar el termostato en la posición de HIGH (alta) por aproximadamente
dos (2) horas antes de utilizar el equipo con producto.
Limpieza
Para remover la gaveta para su limpieza:
1. Hale la gaveta hasta que se detenga.
2. Retire la bandeja interior.
3. Tome el ensamblaje de la gaveta con las dos manos.
4. Levante la gaveta en dirección ascendente mientras que suavemente la retira hacia afuera.
Esto desenganchará la gaveta de los dispositivos que la sujetan. Para reinstalar la
gaveta, revierta el procedimiento anterior. La unidad debe ser limpiada con un paño
húmedo utilizando una solución con un detergente suave o algún tipo de producto de
limpieza no abrasivo. Limpie todo el equipo diariamente para garantizar la larga vida,
buen funcionamiento y apariencia atractiva. No utilice equipos con chorros de agua a
presión (water jet) para limpiarlo.
Mantenimiento y Reparaciones
Contacte la fábrica, al agente de servicio autorizado o a la compañía local de servicio autorizado
cuando el equipo requiera de servicio o mantenimiento. Los cables de reemplazo deben ser
comprados a Star Manufacturing International, Inc.
7
FINISH
MODEL NO.
----
DR. RDL
CK.
DATE 2008-12-05
STAR MFG. INTERNATIONAL, INC.
LIMITS UNLESS OTHERWISE NOTED
FRACTIONS 1/64 DECIMALS .005
PART NO.
2M-Z11979
SST-75
----
10 SUNNEN DRIVE ST. LOUIS, MO 63143
TITLE
WIRE DIAGRAM SST
CHANGES
LTR DATE
A
DR
ROTATED SWITCH 90 DEGREES
ADDED 1A,2A,4B,5B & NOTE
N
7
8
6
L
CE VERSIONS W/
IEC POWER INLET
CHANGE
10/30/13
DOMESTIC VERSIONS
ATTACHED CORDSET
BLACK
WHITE
GREEN
4
*
PILOT LIGHT
3
HEATING ELEMENT
4
SWITCH (BACK)
2
1
1A
2A
4B
5B
NOTE:
SWITCH IS MOUNTED
HORIZONTALLY IN UNIT.
3
1
BLACK
THERMOSTAT
WHITE
2
8
5
JAB
2M-Z3235; SST Series Drawer Roll / Bun Warmer
MATERIAL
MATERIAL
FINISH
MODEL NO.
----
DR. MH
CK.
DATE
2-2-99
LIMITS UNLESS OTHERWISE NOTED
FRACTIONS 1/64 DECIMALS .005
PART NO.
SK1635
SST20,30,50
----
WIRE DIAGRAM SST
TITLE
STAR MFG. INTERNATIONAL, INC.
10 SUNNEN DRIVE ST. LOUIS, MO 63143
CHANGES
LTR DATE
A
B
C
CHANGE
DR
7-7-99
CORRECTED WIRE
NOTATIONS
MH
9-20-99
DELETED WIRE NOTATIONS
TH
REMOVED NUMBERS FROM
SWITCH AND SHOWED AS
BACK OF SWITCH.
10/27/03
PR
GREEN
WHITE
BLACK
HEATING ELEMENT
3
1
5
C
SWITCH
(BACK OF SWITCH)
2
PILOT
LIGHT
THERMOSTAT
4
MATERIAL
FINISH
----
2M-Z3235; SST Series Drawer Roll / Bun Warmer
DR. MH
CK.
DATE
MODEL NO.
SST 230CE
---2-2-99
LIMITS UNLESS OTHERWISE NOTED
FRACTIONS 1/64 DECIMALS .005
STAR MFG. INTERNATIONAL, INC.
TITLE
10 SUNNEN DRIVE ST. LOUIS, MO 63143
PART NO.
SK1636
WIRE DIAGRAM SST CE
CHANGES
LTR DATE
A
B
C
CHANGE
CORRECTED WIRE
NOTATIONS
MH
9-20-99
DELETED WIRE NOTATIONS
TH
10/27/03
REMOVED NUMBERS FROM
SWITCH AND SHOWED AS
BACK OF SWITCH.
G
L N
PLUG INLET
3
HEATING ELEMENT
1
5
C
SWITCH
(BACK OF SWITCH)
2
PILOT
LIGHT
THERMOSTAT
4
9
DR
7-7-99
PR
Visit our Website at: www.star-mfg.com
Email: [email protected]
THOROUGHLY INSPECT YOUR UNIT ON ARRIVAL
This unit has been tested for proper operation before leaving our plant to insure delivery of your unit in perfect condition. However, there are instances in which
the unit may be damaged in transit. In the event you discover any type of damage to your product upon receipt, you must immediately contact the transportation
company who delivered the item to you and initiate your claim with same. If this procedure is not followed, it may affect the warranty status of the unit.
LIMITED EQUIPMENT WARRANTY
All workmanship and material in Star products have a one (1) year limited warranty on parts & labor in the United States and Canada. Such warranty is limited
to the original purchaser only and shall be effective from the date the equipment is placed in service. Star's obligation under this warranty is limited to the repair
of defects without charge, by the factory authorized service agency or one of its sub-agencies. Models that are considered portable (see below) should be taken
to the closest Star service agency, transportation prepaid.
> Star will not assume any responsibility for loss of revenue.
> On all shipments outside the United States and Canada, see International Warranty.
* The warranty period for the Ultra-Max, Hot Plates, Griddles, Charbroilers is (3) years parts & labor.
* The warranty period for the Star-Max, Charbroilers, Griddles, Hot Plates, Fryers & Finishing Oven is (2) years parts & labor.
* The warranty period for the JetStar six (6) ounce & Super JetStar eight (8) ounce series popcorn machines is two (2) years.
* ThewarrantyperiodfortheChrome-MaxGriddlesisfive(5)yearsonthegriddlesurface.Seedetailedwarrantyprovidedwithunit.
* The warranty period for Dura-Tec coatings is one year under normal use and reasonable care. This warranty does not apply if damage occurs to
Dura-Teccoatingsfromimpropercleaning,maintenance,useofmetallicutensils,orabrasivecleaners,abrasivepads,productidentifiersand
point-of-sale attachments, or any other non-food object tha comes in continuous contact with the roller coating. This warranty does not apply to the
“non-stick” properties of such materials.
> This warranty does not apply to "Special Products" but to regular catalog items only. Star's warranty on "Special Products" is six (6) months on parts
and ninety (90) days on labor.
> This warranty does not apply to any item that is disassembled or tampered with for any purpose other than repair by a Star Authorized Service Center or
the Service Center's sub-agency.
> This warranty does not apply if damage occurs from improper installation, misuse, wrong voltage, wrong gas or operated contrary to the Installation and
Operating instructions.
> This warranty is not valid on Conveyor Ovens unless a "start-up/check-out" has been performed by a Factory Authorized Technician.
PARTS WARRANTY
Parts that are sold to repair out of warranty equipment are warranted for ninety (90) days. The part only is warranted, the labor to replace the part is NOT warranted.
SERVICES NOT COVERED BY WARRANTY
1. Traveltimeandmileagerenderedbeyondthe50mileradiuslimit
10. Voltage conversions
2. Mileage and travel time on portable equipment (see below)
11. Gas conversions
3. Labor to replace such items that can be replaced easily during a daily cleaning
12. Pilot light adjustment
routine, ie; removable kettles on fryers, knobs, grease drawers on griddles, etc.
13. Miscellaneous adjustments
4. Installation of equipment
14. Thermostat calibration and by-pass adjustment
5. Damagesduetoimproperinstallation
15. Resettingofcircuitbreakersorsafetycontrolsorresetbuttons
6. Damages from abuse or misuse
16. Replacementofbulbs
7. Operated contrary to the Operating and Installation Instructions
17. Replacementoffuses
8. Cleaning of equipment
18. Repairofdamagecreatedduringtransit,delivery,&
9. Seasoning of griddle plates
installationORcreatedbyactsofGod
PORTABLE EQUIPMENT
Star will not honor service bills that include travel time and mileage charges for servicing any products considered "Portable" including items listed below.
These products should be taken to the Service Agency for repair:
ALL:
* TheModel510FD,510FFFryer.
* Pop-Up Toasters
* TheModel526TOAToasterOven.
* Butter Dispensers
* TheModelJ4R,4oz.PopcornMachine.
* Pretzel Merchandisers
*TheModel518CMA&526CMACheeseMelter.
* TheModel12MC&15MC&18MCPHotFoodMerchandisers.
* TheModel12NCPW&15NCPWNachoChip/PopcornWarmer.
* All Hot Dog Equipment except Roller Grills & Drawer Bun Warmers.
* All Nacho Cheese Warmers except Model 11WLA Series Nacho Cheese Warmer.
* All Condiment Dispensers except the Model HPD & SPD Series Dispenser.
* All Specialty Food Warmers except Model 130R, 11RW Series, and 11WSA Series.
* AllQCS/RCSSeriesToastersexcept Model QCS3 & RCS3 Series.
* All Fast Steamer Models except Direct Connect Series.
(Model 16PD-A Only)
* Pastry Display Cabinets
* Nacho Chip Merchandisers
* Accessories of any kind
* Sneeze Guards
* Pizza Ovens
(Model PO12 Only)
* Heat Lamps
* Pumps-Manual
The foregoing warranty is in lieu of any and all other warranties expressed or implied and constitutes the entire warranty.
FOR ASSISTANCE
Should you need any assistance regarding the Operation or Maintenance of any Star equipment; write, phone, fax or email our Service Department.
In all correspondence mention the Model number and the Serial number of your unit, and the voltage or type of gas you are using.
2M-4497-2 11/21/14
47
6
41
48
7
1
8
SST-5O LOOKS
9
SLIGHTLY DIFFERENT
41
39
38
2
re
He
en s
Op Bun
r
Fo
36
37
40
10
37
3
12
11
38
14
13
16
35
4
36
46
32
ON
OFF
33
26
15
24
30
27
5
31
17
34
28
40
42
25
41
29
21
18
20
40
19
STAR MANUFACTURING INTERNATIONAL, INC.
MODELS SST-20, SST-30, SST-50
SK1632
11
REV C
5/23/13
PARTS LIST
SST-20 120V/230CE Drawer Roll / Bun Warmer
Fig No
Part No
Qty
Description
1
2
3
4
5
6
A4-Z2212
A4-BW2003
A4-BW2014
A4-Z2210
A4-Z3221
2D-Z5898
1
1
1
1
1
1
7
A4-BW2013
1
8
9
10
11
12
13
1
1
1
1
1
1
15
A4-Z3328
A4-BW2001
2M-Z2231
A4-Z5892
A4-Z2214
A4-Z2216
2N-Z2235
2N-Z2530
A4-Z2222
1
16
2M-Z2232
1
17
18
19
20
A4-Z2218
A4-BW2012
2E-Z3034
A4-Z2287
1
1
1
1
21
2R-Z5846
4
TOP
LINER-TOP
LINER-BODY
BODY
BOTTOM
BUN PAN
DRAWER FRAME
ASSEMBLY
DRAWER LINER
DRAWER FRONT
GRAPHIC-DRAWER
PAN COVER
ELEMENT SUPPORT
BOTTOM LINER
ELEMENT 300 WATTS
ELEMENT 300 WATTS
CONTROL PANEL
GRAPHIC-CNTRL
PANEL
DOOR LINER
DOOR ASSY
PLUG INLET
PLUG INLET HOUSING
FOOT 3/8” STUD, 1”
HIGH
14
1
25
26
27
28
29
E4-403009
2E-Z0512
2K-7889
2R-Y7330
21-Z1894
2A-Z2233
A4-Z2228
30
A4-Z2229
1
31
32
32
33
2R-Z1854
2E-Z1858
2E-Z3156
2T-Z2236
1
1
1
1
34
A4-BW2005
1
35
36
37
38
2P-Z0315
2C-1810
2C-Z0498
2K-z2895
4
12
8
2
24
December 10, 2013, Rev. I
SST-20 120V/230CE Drawer Roll / Bun Warmer
Application
Fig No
Part No
39
2J-Z2329
39
2J-Z3157
40
2C-Y1451
Qty
1
1
12
Description
PILOT LIGHT
PILOT LIGHT
RIVET .125 X .25
SCREW #8 X .375 TH
NP
THREADED INSERT
41
2C-6349
34
42
2C-Z2642
4
43
2C-1494
1
SCREW 8-32 X 1/2 STL
RH
44
2C-1825
2
WASHER #8 EXT.
SHAKEPROOF
45
46
47
2C-2556
2C-H1578
2B-Z5847
2
1
1
NUT #8-32
SCREW 8-32 X 1”
BUN RACK
Application
230 CE
SST-20-120V
SST-20 120V
SST-20 230CE
SST-20 230CE
SST-20 230CE
SST-20 120V
SST-20 230CE
SST-20 120V
1
CORDSET
1
2
2
2
1
CORDSET BUSHING
MAGNETIC CATCH
HINGE INSERT
HINGE SLEEVE
HINGE BRACKET LEFT
HINGE BRACKET
RIGHT
CONTROL KNOB
SWITCH ON/OFF
SWITCH ON/OFF
230 CE
THERMOSTAT
DOOR ASSEMBLY
COMPLETE
ROLLER
BURR RIVETING
NUT 10/24 NYLOK
BUSHING SPLIT
1
IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED
PAGE
1
INCLUDE MODEL AND SERIAL NUMBER
OF
Some items are included for illustrative purposes only and in certain instances may not be available.
Star Manufacturing International, Inc.
12
PARTS LISTDecember 10, 2013, Rev. I
MODEL SST-30 120V/230CE Drawer Roll / Bun Warmer
SST-30 120V/230CE Drawer Roll / Bun Warmer
Fig No
Part No
Qty
Description
1
2
3
4
5
6
A4-Z2270
A4-BW3003
A4-BW3013
A4-Z2268
A4-Z3222
2D-Z5899
1
1
1
1
1
1
TOP
LINER-TOP
LINER-BODY
BODY
BOTTOM
BUN PAN
7
A4-BW3012
1
DRAWER FRAME
ASSEMBLY
8
9
10
11
12
13
1
1
1
1
1
1
DRAWER LINER
DRAWER FRONT
GRAPHIC-DRAWER
PAN COVER
ELEMENT SUPPORT
BOTTOM LINER
1
ELEMENT 400 WATTS
15
Z4-Z3322
A4-BW3001
2M-Z2286
A4-Z5893
A4-Z2272
A4-Z2274
2N-Z2283
2N-Z2389
A4-Z2280
1
16
2M-Z2284
1
17
18
19
20
A4-Z2276
A4-BW3011
2E-Z3034
A4-Z2287
1
1
1
1
21
2R-Z5846
4
CONTROL PANEL
GRAPHIC-CONTROL
PANEL
DOOR LINER
DOOR ASSY
PLUG INLET
PLUG INLET HOUSING
FOOT 3/8” STUD, 1”
HIGH
14
25
26
27
28
29
E4-403009
2E-Z0512
2K-7889
2R-Y7330
21-Z1894
2A-Z2233
A4-Z2228
30
A4-Z2229
1
31
32
33
2R-Z1854
2E-Z1858
2T-Z2236
1
1
1
CORDSET BUSHING
MAGNETIC CATCH
HINGE INSERT
HINGE SLEEVE
HINGE BRACKET LEFT
HINGE BRACKET
RIGHT
CONTROL KNOB
SWITCH ON/OFF
THERMOSTAT
34
A4-BW3005
1
DOOR ASSY COMP
35
36
37
38
2P-Z0315
2C-1810
2C-Z0498
2K-Z2895
4
12
8
2
ROLLER
BURR RIVETING
NUT 10-24 NYLOK
BUSHING SPLIT
24
1
CORDSET
1
2
2
2
1
Application
SST-30 120V/230CE Drawer Roll / Bun Warmer
Fig No
Part No
Qty
Description
39
40
2J-Z2329
2C-Y1451
1
12
41
2C-6349
34
42
2C-Z2642
4
43
2C-1494
1
PILOT LIGHT
RIVET .125 X .25
SCREW #8 X .375 TH
NP
THREADED INSERT
SCREW 8-32 X 1/2 STL
RH
44
2C-1825
2
45
46
47
2C-2556
2C-H1578
2B-Z5847
2
1
1
48
A4-BW3021
1
Application
SST-30-120V
WASHER #8 EXT.
SHAKEPROOF
NUT #8-32
SCREW 8-32 X 1”
BUN RACK
DRAWER ASSY
COMPLETE
SST-30 120V
SST-30 230CE
SST-30 230CE
SST-30 230CE
SST-30 120V
SST-30 230CE
SST-30 120V
1
IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED
PAGE
1
INCLUDE MODEL AND SERIAL NUMBER
OF
Some items are included for illustrative purposes only and in certain instances may not be available.
Star Manufacturing
International, Inc.
13
PARTS LIST
MODEL: SST-50
120V/230CE Drawer Roll / Bun Warmer
SST-50 120V/230CE Drawer Roll / Bun Warmer
Fig No
Part No
Qty
1
2
3
4
5
6
7
A4-Z2310
A4-BW5003
A4-BW5011
A4-Z2308
A4-Z3223
2D-Z5898
A4-BW5010
1
1
1
1
1
2
1
TOP
LINER-TOP
LINER-BODY
BODY
BOTTOM
BUN PAN
DRAWER FRAME ASSY (not as shown)
8
A4-Z3316
1
DRAWER LINER
9
A4-BW5032
2M-Z2326
1
1
DRAWER FRONT ASY
GRAPHIC-DRAWER
10
11
12
13
Description
Application
DOES NOT HAVE ANY DRAWER GRAPHICS
15
A4-Z5894
A4-Z2272
A4-Z2314
2N-Z2324
2N-Z2312
A4-Z2320
1
16
2M-Z2327
1
17
18
19
20
21
1
1
1
1
4
25
26
27
28
29
30
31
32
A4-Z2316
A5-BW5009
2E-Z3034
A4-Z2287
2R-Z5846
E4-403009
2E-Z0512
2K-7889
2R-Y7330
21-Z1894
2A-Z2233
A4-Z2228
A4-Z2229
2R-Z1854
2E-Z1858
1
2
2
2
1
1
1
1
PAN COVER
ELEMENT SUPPORT
BOTTOM LINER
ELEMENT 600 WATTS
ELEMENT 600 WATTS
CONTROL PANEL
GRAPHIC-CONTROL
PANEL
DOOR LINER
DOOR ASSY
PLUG INLET
PLUG INLET HOUSING
FOOT 3/8” STUD, 1” HIGH
CORDSET
CORDSET
CORDSET BUSHING
MAGNETIC CATCH
HINGE INSERT
HINGE SLEEVE
HINGE BRACKET LEFT
HINGE BRACKET RIGHT
CONTROL KNOB
SWITCH ON/OFF
33
2T-Z2236
1
THERMOSTAT
14
24
1
1
1
1
1
SST-50ND
SST-50 120V
SST-50 230CE
December 10, 2013, Rev. I
SST-50 120V/230CE Drawer Roll / Bun Warmer
Fig No
Part No
Qty
Description
Application
DOOR ASSY COMPLETE
34
A4-BW5005
1
35
36
37
38
39
40
41
42
43
2P-Z0315
2C-1810
2C-Z0498
2K-Z2895
2J-Z2329
2C-Y1451
2C-6349
2C-Z2642
2C-1494
4
12
8
2
1
12
34
4
1
ROLLER
BURR RIVETING
NUT 10-24 NYLOK
BUSHING SPLIT
PILOT LIGHT
RIVET .125 X .25
SCREW #8 X .375 TH NP
THREADED INSERT
SST-50-120V
SCREW 8-32 X 1/2 STL RH
44
2C-1825
2
WASHER #8 EXT.
SHAKEPROOF
45
46
47
2C-2556
2C-H1578
2B-Z5847
2
1
2
NUT #8-32
SCREW 8-32 X 1”
BUN RACK
48
A4-BW5033
1
DRAWER ASSY COMPLETE
(NO GRAPHICS)
SST-50 230CE
SST-50 230CE
SST-50 120V
SST-50 230CE
SST-50 120V
1
IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED
PAGE
1
INCLUDE MODEL AND SERIAL NUMBER
OF
Some items are included for illustrative purposes only and in certain instances may not be available.
Star Manufacturing International, Inc.
1
2
3
5
4
6
34
7
33
1
12
8
13
10
1
32
11
14
29
19
18
31 30
9
15
17
19 18
17
4
16
15
21
28
22
27
23
Nameplate
26 25 24
MODEL: SST-75
STAR MANUFACTURING INTERNATIONAL, INC.
SK2441
15
Rev. -
10/02/09
PARTS LISTDecember 10, 2013, Rev. I
MODEL: SST-75
120V/230CE Drawer Roll / Bun Warmer
SST-75 120V/230CE Drawer Roll / Bun Warmer
Fig No
1
2
3
4
5
6
7
8
9
10
11
12
13
14
16
16
17
18
19
21
22
23
24
25
26
27
28
29
30
31
32
33
34
NI
Part No.
2C-6349
A4-Z11900
A4-BW5020
2K-Z2895
2J-Z2329
2J-Z3157
8A-75BWST
A4-BW5018
2T-Y9113
A4-Z11909
2M-Z11956
2R-Z4621
2E-Z1858
A4-Z11947
2N-Z2312
2N-Z2324
2C-Z4248
E9-Z3987
A4-Z11895
2C-1810
2P-Z0315
A4-Z11897
A4-Z11970-1
A4-Z11970-2
2E-Z0512
2E-Z11975
2K-7889
2C-1513
2C-Z6925
2R-Z5846
2C-Z4063
A4-BW5017
A4-BW5021
2M-Z12029
2D-Z11949
2B-Z5848
A4-Z11899
2E-Z3034
Description
Qty
SCREW #8X3/8 B THP STL NP
TOP
TOP LINER ASSEMBLY
BUSHING HEYCO OCB-500
PILOT LIGHT
PILOT LIGHT 250V AMBER
BUN WARMER SHELF TALL, ACCESSORY
BODY WRAP ASSEMBLY
THERMOSTAT
CONTROL HOUSING
OVERLAY - SST
KNOB, 1-3/4 - .250”D”HOLE
SWITCH-LIGHTED
ELEMENT BRACKET
ELEMENT 230V/600W
ELEMENT
NUT 10-24 NYLK SS
ROLLER SUPPORT DW/N
SLIDE RAIL
WASHER 3/16 BURR STL NP
BEARING-TRACK
BOTTOM
POWER INLET POCKET
POWER INLET PLATE
CORD SET, CONT. EUR 10A
CORDSET 18-3 5-15 PO
BUSHING HEYCO SR-11-2
SCREW 10-24X1/2 RHP SS
SCREW #8X1/2 HEXW B SS
FOOT-ROLLER GRILLS
SCREW 10-24X1/2 SS THP
DRAWER FRAME ASSEMBLY
DRAWER FACE ASSEMBLY
GRAPHIC, DRAWER FRONT
STEAM PAN - DOUBLE 6”
BUN RACK (LARGE)
PAN COVER
IEC CORD INLET HOT
10
1
1
2
1
Application
230CE
1
1
1
1
1
1
1
1
230CE
11
2
2
4
4
1
1
1
1
4
37
4
4
1
1
1
1
2
1
1
230CE
230CE
230CE
1
IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED
PAGE
1
INCLUDE MODEL AND SERIAL NUMBER
OF
Some items are included for illustrative purposes only and in certain instances may not be available.
Star Manufacturing International, Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement