L-Bracket for Nikon D5100
INSTRUCTIONS FOR CONVERTING
CAMERA PLATE PZ-144 INTO
L-BRACKET BL-D5100
FOR THE NIKON D5100 CAMERA
a
aLBS-D5100
Side Bracket
b PZ-144 Camera Plate
c(2) Stainless Steel Screws
dAllen Wrench
eLoctite®
b
d
INSTRUCTIONS FOR CONVERTING
CAMERA PLATE PZ-144 INTO
L-BRACKET BL-D5100
FOR THE NIKON D5100 CAMERA
a
b
d
Requires the PZ-144 Camera Plate and
the LBS-D5100 Side Bracket.
e
c
aLBS-D5100
Side Bracket
b PZ-144 Camera Plate
c(2) Stainless Steel Screws
dAllen Wrench
eLoctite®
Requires the PZ-144 Camera Plate and
the LBS-D5100 Side Bracket.
e
c
STEP ONE
STEP TWO
STEP THREE
STEP ONE
STEP TWO
STEP THREE
STEP FOUR
STEP FIVE
STEP SIX
STEP FOUR
STEP FIVE
STEP SIX
Apply Loctite® to
stainless steel screws
(supplied).
Snuggly tighten first screw
with supplied allen
wrench (do not tighten
completely).
Make sure that the side
bracket fits into the
key way groove on the
camera plate.
Insert 2nd screw and tighten
both screws. L-Bracket is
ready for immediate use.
Insert screw through the
side bracket and into
the camera plate.
Attach L-Bracket
to camera.
www.kirkphoto.com
800.626.5074 • 260.665.3670
333 Hoosier Drive, Angola, IN 46703-9336
Apply Loctite® to
stainless steel screws
(supplied).
Snuggly tighten first screw
with supplied allen
wrench (do not tighten
completely).
Make sure that the side
bracket fits into the
key way groove on the
camera plate.
Insert 2nd screw and tighten
both screws. L-Bracket is
ready for immediate use.
Insert screw through the
side bracket and into
the camera plate.
Attach L-Bracket
to camera.
www.kirkphoto.com
800.626.5074 • 260.665.3670
333 Hoosier Drive, Angola, IN 46703-9336
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement