Pa r k H i l l User Instructions Setting hour, minute and second Specifications Gant Id No: 1000 Movement No: 6P26 Battery: SR621SW Pull the crown to position 2 when the second hand reaches the 12 o’clock position and stops there. Then set the hour and minute hands. When setting the minute hand, put it 4 to 5 minutes earlier than the time to be set, and turn it back to the correct time. DISPLAY HOUR HAND MINUTE HAND 1 2 CROWN SECOND HAND NORMAL POSITION Setting calendar Pull the crown to position 1 and turn counter-clockwise to adjust the date. If the date is set between 9:00 pm and 0:00 am, the date will not change correctly. CALENDAR This document is provided “as is” without representation or warranty of any kind either express or implied.