acs-2000 ul listed access control power supply

acs-2000 ul listed access control power supply
ACS-2000
UL LISTED ACCESS CONTROL POWER SUPPLY
High output provides greater flexbility and cost savings in access control installations.
FEATURES
■ Selectable 12VDC or 24VDC output
■ 2.5 amps continuous supply output current
■ Filtered and electronically regulated output
■ Battery charging circuit for lead acid or gel type back-up
with zero voltage drop
■ Short circuit and thermal overload protection
■ Automatic transfer to battery back-up zero voltage drop
■ AC input and DC output LED indicators
■ AC failure supervision (form C contact rated at 1A
@30VDC)
■ Low/missing battery supervision (form C contact, 1A
@30VDC)
■ Mounting studs for 4-channel (ACS-2000-4) or 8-channel
(ACS-2000-8) distribution board
HOW TO ORDER
DESCRIPTION
■ ACS-2000
The ACS-2000 provides a robust 2.5 amps of
power for access control or universal power, selectable
for either 12VDC or 24VDC, yet typically costs less than
competitive products providing less than half as much power.
In access control installations, one ACS-2000 may be sufficient to power numerous devices for several doors that might
otherwise require multiple power supplies. A battery back-up
charging circuit for lead acid or gel type batteries (not included) allows automatic transfer to back-up power upon AC
failure with zero voltage drop. AC fail and battery supervision
are also provided and an AC line cord included.
2.5A, 12/24VDC UL Listed Acess Control Power Supply
■ ACS-2000-4
4-channel distribution board with PTC fuse protected
individual outputs
■ ACS-2000-8
8-channel distriution board with PTC fuse protected
individual outputs
The ACS-2000 includes mounting studs for a 4-channel
(ACS-2000-4) or 8-channel (ACS-2000-8) distribution board to
provide individually fuse protected channels.
MG Electronics | mgelectronics.com | 631-582-3400 | 32 Ranick Rd Hauppauge NY 11788
STAND-BY SPECIFICATIONS
(TOTAL CURRENT SHOWN)
SPECIFICATIONS
■■Input: 115VAC, 60 Hz, 1.45 amps
■■Output: 12VDC or 24VDC selectable
• 2.5 amps continuous supply current
• Class II rated power limited
• Filtered and electronically regulated
■■Battery charging circuit: Maximum current .7
amps High power for long wire runs
■■Stand-by: (insert chart from II) Dimensions: 2 1/2’’
(D) x 2 1/4’’(W) x 2’’ (H)
• Supervision:
AC failure, with output via form
C contact rated at [email protected]
• Low battery/missing battery, with output via
form C contact rated at [email protected]
■■Dimensions (enclosure): 13.5”H X 13”L X 3.25”D
(343mm X 330mm X 83mm)
• Accommodates up to two (2) 12VDC 7AH
batteries (not included)
• 0.5” and 0.75” combination knockouts
• Top mounting flange in addition to interior
mounting holes
■■Weight: 8.6 lbs.(3.9 Kg)
CERTIFICATIONS
■■cUL US, CE, CFM, Buildings
MG Electronics | mgelectronics.com | 631-582-3400 | 32 Ranick Rd Hauppauge NY 11788
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement