flooring product guide - RIBA Product Selector

flooring product guide - RIBA Product Selector
FLOORING PRODUCT
GUIDE
CONTENTS
Screeds & screed repair...............12 RESILIENT & TEXTILE ADHESIVES......39
Eporip Turbo
Mapecem
Mapecem Pronto
Prosfas
Topcem
Topcem Pronto
Adesilex G19
Adesilex G20
Adesilex VZ
Ultrabond Eco 17O
Ultrabond Eco 380
Ultrabond Eco 520
Ultrabond Eco Fix
Primers.............................................18 Ultrabond Eco Tack
Eco Prim Grip
Ultrabond Eco VS90
Eco Prim T
Ultrabond Eco V4 SP Fibre
Mapeprim SP
Ultrabond Super Grip
Levelling Compounds....................22 WOOD ADHESIVES...............................49
Latexplan Trade
Latexplan
Planitex D10
Nivorapid
Planipatch
Latex Plus
Ultraplan
Ultraplan Eco
Ultraplan Maxi
Ultraplan Renovation Screed
Fiberplan
Ultrabond P913 2K
Ultrabond P902 2K
Lignobond
Ultrabond P990 1K
Ultrabond Eco S945 1K
Ultrabond Eco S955 1K
Ultrabond S965 1K
Ultrabond S997 1K
Adesilex PA
INSTALLATION SYSTEM FOR
INSTALLING VINYL SHEET ON UNEVEN
Surface membranes.......................32 SUBSTRATES.......................................56
Mapelay
Mapeproof ESM
Mapeproof 1K Turbo
Mapeproof One Coat
INSTALLATION SYSTEM FOR
INSTALLING RUBBER FLOORING ON
SUBSTRATES WITH HIGH RESIDUAL
MOISTURE...........................................58
INSTALLATION SYSTEM FOR
INSTALLING ENGINEERED WOOD
ON TO A SAND:CEMENT SCREED OR
CONCRETE SUB-FLOOR ......................60
SUBFLOOR PRODUCT SELECTOR .......62
FLOORING ADHESIVES SELECTOR .....64
The
TheWorld
Worldofof
PRODUCTS
FOR BUILDING
PRODUCTS FOR
THERMAL INSULATION
ELASTIC SEALANTS
AND ADHESIVES
GRINDING AIDS
FOR CEMENT
PRODUCTS FOR CEMENTITIOUS
AND RESIN FLOORING
ADMIXTURES FOR CONCRETE
PRODUCTS FOR
CERAMICS AND STONE
PRODUCTS FOR
ACOUSTIC INSULATION
PRODUCTS FOR RESILIENT
AND TEXTILE MATERIALS
PRODUCTS FOR THE
REPAIR OF MASONRY
PRODUCTS FOR
WOODEN FLOORING
WALL PROTECTIVE AND
DECORATIVE COATINGS
PRODUCTS FOR UNDERGROUND
CONSTRUCTION
Transforming a world of project
PRODUCTS FOR STRUCTURAL
STRENGTHENING
PRODUCTS FOR
WATERPROOFING
dreams and visions into reality
Certification-proof
Certification-proof
Mapei’s technologically advanced products, certified
according to the most strict and demanding international
standards, have always played a major part in the design
and creation of large building projects, representing Italian
excellence all around the world. Safe products for the
environment, workers and end users.
No need for greenwashing. You have to believe, invest in
research and have your products certified by official,
internationally recognised organisations to create
eco-sustainable projects. Mapei does not invent
certification; it is awarded to Mapei all over the world.
No need
for greenwashing
The
WORLD
of MAPEI
CONSTANT INVOLVEMENT IN RESPECT
FOR THE ENVIRONMENT AND MANKIND
Our products are:
based on the innovative R&D labs of Mapei Group
formulated with recycled, ultra-light material
with a very low VOC content and emissions
developed to reduce energy consumption
safe for the environment, installers and end users
(
To develop
products, you cannot wash them green.
develop eco-sustainable products,
You have
have to
to invest
invest ininresearch
researchand
andhave
haveyour
yourproducts
productscertified
certifiedbyby
internationally
internationally recognized
recognisedinstitutions.
institutions.
Mapei’s
long-lastingcommitment
commitment
environment
Mapei’s long-lasting
to to
thethe
environment
results in
in plenty
plentyof
ofproducts
productswhich
whichhave
havebeen
beenawarded
awarded
international
international certifications
achieving
certificationsand
andcontribute
contributetoto
achieving
eco-sustainable buildings.
eco-sustainable
buildings.
)
manufactured locally by eco-sustainable plants
Choose Mapei for your eco-sustainable projects.
More than 150 MAPEI products to help designers and contractors create innovative LEED projects
which comply with the Green Building Council. LEED The Leadership in Energy and Environmental Design.
Carry out your
project with Mapei
CERTIFIED QUALITY AND COMMITMENT
TO THE ENVIRONMENT
...beyond apparent sustainability
Use Mapei in your next certified project.
Mapei’s technologically advanced products,
certified according to the most severe and
demanding standards, have always played
a part in the design and creation of large
building projects, representing Italian
excellence all around the world.
TECHNOLOGY YOU CAN BUILD ON
TIFIED QUALITY AND COMMITMENT
THE ENVIRONMENT
CERTIFIED
QUALITY
AND
COMMITMENT
CERTIFIED
QUALITY
AND
COMMITMENT
CERTIFIED
QUALITY
AND
COMMITMENT
CERTIFIED
QUALITY
AND
COMMITMENT
TO
THE
ENVIRONMENT
TO
THE
ENVIRONMENT
TO
THE
ENVIRONMENT
RTIFIED
QUALITY
AND
COMMITMENT
TO
TO THE
THE ENVIRONMENT
ENVIRONMENT
THE ENVIRONMENT
GUARANTEE OF THE QUAL TY
NT AND SAFETY MANAGEMENT
ACCORDANCE W TH THE
S SO 9001 SO 14001 EMAS
18001MAPEI IS A GUARANTEE
GUARANTEE OF
OF THE
QUALITY,
QUALITY,
MAPEI
IS A GUARANTEE
OF THE
THE
QUALITY,
ENVIRONMENT
AND
MANAGEMENT
THE
QUALITY,
ENVIRONMENT
MAPEI
IS A GUARANTEE
OF THE
QUALITY,
ENVIRONMENT
AND SAFETY
SAFETY
MANAGEMENT
ENVIRONMENT
AND
SAFETY
MANAGEMENT
MAPEI
IS
A
GUARANTEE
OF
THE
QUALITY,
SYSTEM
IN
ACCORDANCE
WITH
THE
MAPEI
IS
A
GUARANTEE
OF
THE
QUALITY,
AND
SAFETY
MANAGEMENT
ENVIRONMENT
AND SAFETY
MANAGEMENT
SYSTEMISIN
IN
ACCORDANCE
WITH
THE
MAPEI
A ACCORDANCE
GUARANTEE
OFWITH
THE
QUALITY,
SYSTEM
THE
ENVIRONMENT
AND
SAFETY
MANAGEMENT
STANDARDS
ISO
9001,
ISO
14001,
EMAS
ENVIRONMENT
AND
SAFETY
MANAGEMENT
SYSTEM
IN
ACCORDANCE
SYSTEM
IN
ACCORDANCE
WITH
THE
STANDARDS
ISO
9001,
ISO
14001,
EMAS
ENVIRONMENT
AND
SAFETY
MANAGEMENT
GUARANTEE
OF
THE
QUALITY,
STANDARDS
ISO 9001, ISO
14001,
EMAS
SYSTEM
IN
ACCORDANCE
WITH
THE
WITH
THE
STANDARDS
ISO
AND
OHSAS
18001
SYSTEM
IN
ACCORDANCE
WITH
THE
STANDARDS
ISO
9001,
ISO
14001,
EMAS
AND
OHSAS
18001
SYSTEM
IN
ACCORDANCE
WITH
THE
ENT AND
SAFETY
MANAGEMENT
AND OHSAS
18001
STANDARDS
ISO
9001,
ISO
14001,
EMAS
9001,
ISO
14001,
EMAS
AND
STANDARDS
ISO
9001,
ISO
14001,
AND
OHSAS
18001
STANDARDS
ISO
9001, ISO 14001, EMAS
EMAS
ACCORDANCE
WITH
THE
AND OHSAS
OHSAS
18001
OHSAS
18001
AND
18001
AND
OHSAS
18001
S ISO 9001, ISO 14001, EMAS
...beyond apparent sustainability
...beyond
apparent
sustainability
...beyond
apparent
sustainability
...beyond
apparent
...beyond apparent sustainability
sustainability
...beyond apparent sustainability
M
M
m
m
m
m
since
1995
has
enforced
the
Mapei
Mapei SpA,
SpA, since
since 1995
1995 has
has enforced
enforced the
the
certified
according
to
Mapei
sincecertified
1995 has
enforcedto
Quality
System
according
QualitySpA,
System
certified
according
tothe
Mapei
SpA,
since
1995
has
enforced
the
UNI
EN
ISO
9001.
The
program
also
Quality
System
according
UNI
9001.
The
also
UNI EN
EN ISO
ISO
9001.certified
The program
program
alsoto
Mapei
SpA,
since
1995
has
enforced
Quality
System
certified
according
tothe
entailed
the
ISO
9001
of
UNI
ENSpA,
ISO
9001.
Thecertification
program
also
Mapei
1995
has
enforced
entailed
the
ISO
of
entailed
the since
ISO 9001
9001
certification
of the
SpA,
since
1995certification
has
enforced
m
M
m Mapei
m
Quality
System
certified
according
tothe
many
other
subsidiaries
in
the
Group
entailed
thesubsidiaries
ISO 9001
of
UNI
ENother
ISO
9001.
Thecertification
program
also
Quality
System
certified
according
to
many
in
the
Group
inaccording
the Groupto
Quality
System
certified
w
UNI
ENother
ISO
9001.
Thecertification
program
also
including
UK
in
2010.
many
subsidiaries
in the Group
entailed
the
ISO
9001
of
UNI
EN
ISO
9001.
The
also
including
UK
in
UKthe
in 2010.
2010.
Mapei SpA, since 1995 has
enforced
UNI
ENother
ISO
9001.
The program
program
also
entailed
the
ISO
9001
of
many
in the Group
including
UKsubsidiaries
in 2010.
entailed
the
ISO
9001 certification
certification
of
Quality System certified according
to subsidiaries
entailed
the
ISO
9001
certification
of
many other
other
in the
the Group
Group
including
UK
in 2010.
many
subsidiaries
in
UNI EN ISO 9001. The program
many also
other
in the Group
including
UKsubsidiaries
in main
2010.production
Mapei
Group's
and
including
UK
in
2010.
Mapei
Group's
production and
and
entailed the ISO 9001 certification
ofUK inmain
including
2010.production
distribution
centres
enforce
the and
Mapei
Group's
mainenforce
production
centres
the
enforce
the
many other subsidiaries indistribution
the Group
Mapei
Group's
mainenforce
production
and in
Environmental
Management
System
distribution
centres
the
Management
System in
in
Environmental
Management
System
including UK in 2010.
Mapei
main
production
and
distribution
centres
enforce
the
accordance
with
the
ISO
14001
standard.
Environmental
Management
System
in
Mapei Group's
Group's
main
production
and
the ISO
ISO 14001
14001
standard.
accordance
with
the
standard.
Mapei
Group's
main
production
and
distribution
centres
enforce
the
Environmental
Management
System
in
18001
in
2011.
UK plant achieved
ISO
14001
accordance
with
the
ISO
14001
standard.
distribution
centres
enforce
the
in 2011
2011.
ISO
14001
UK
plant
achieved
ISO
14001
in
distribution
centres
enforce
the
Environmental
Management
System
in
accordance
with
the
14001
in standard.
2011.
UK
plant achieved
ISOISO
14001
Environmental
Management
System
in
and
OHSAS
18001
inISO
2012.
Mapei Group's main production
andachieved
Environmental
Management
System
in
ES VES AND GROUTS FOR CERAM C
accordance
with
14001
in standard.
2011.
UK
plant
ISO
14001
accordance
with the
the
ISO
14001
standard.
distributionMcentres enforce
the
accordance
with
the
ISO
14001
standard.
in 2011.
2011.
UK plant
plant achieved
achieved ISO
ISO 14001
14001 in
UK
STONE MATER ALS PRE BLENDED
Environmental Management
System
in
in 2011.
UK
plant achieved
ISO 14001
M
m
accordance with the ISO 14001 standard.
OR SCREEDS AND FOR REPA R NG
m
m
UK plant achieved ISO 14001 in 2011.
ECO ADHES VES AND ADM XTURES
M
m
m
m
mADHESIVE AND GROUTS
ETE ARE
CE MARKED
ANDAND
CERT
F ED FOR
MAPEI
ADHESIVES
GROUTS
CERAMIC
ADHESIVE AND GROUTS
MAPEI
ADHESIVES
AND
GROUTS
FOR
CERAMIC
FOR
CERAMIC
ADHESIVE
ANDTILES
GROUTS
MAPEI
ADHESIVES
AND GROUTSPRE-BLENDED
FOR CERAMIC
FOR CERAMIC
TILES
NCE WMAPEI
TH THE
MOST
SEVERE
TILES
AND
STONE
MATERIALS,
ADHESIVE
ANDGROUTS
GROUTS
FOR
CERAMIC
TILES
ADHESIVE
AND
AND GROUTSPRE-BLENDED
FOR CERAMICM
TILES
AND
STONE
MATERIALS,
ADHESIVES
w adhesives
All
Mapei
for
TILES
AND
STONE
MATERIALS,
PRE-BLENDED
ADHESIVE
AND
GROUTS
All
Mapei
adhesives
for ceramics
ceramics and
and stone
stone
FOR
CERAMIC
TILES
MAPEI
ADHESIVES
AND GROUTS
GROUTS
FOR
CERAMIC m
FOR
CERAMIC
TILES
ADHESIVE
AND
GROUTS
AND NTERNAT
ONAL
STANDARDS
MORTARS
FOR
SCREEDS
AND
FOR
REPAIRING
MAPEI
ADHESIVES
AND
FOR
CERAMIC
m
wMapeiconform
ADHESIVE
ANDTILES
GROUTS
material
to Standard
Standard
EN 12004.
12004.
All
adhesives
for ceramics
and stone
MORTARS
FOR
SCREEDS
AND
FOR
REPAIRING
MAPEI
ADHESIVES
AND GROUTS
FOR
CERAMIC
TILES
AND
PRE-BLENDED
STONE
MATERIALS,
FOR
CERAMIC
material
conform
to
EN
FOR
CERAMIC
TILES
MORTARS
FOR
SCREEDS
AND
FOR
REPAIRING
All
Mapei
adhesives
for
ceramics
and stone
stone
FOR
CERAMIC
TILES
material
conform
to
Standard
EN
12004.
TILES
AND
STONE
MATERIALS,
PRE-BLENDED
All
Mapei
adhesives
for
ceramics
and
CONCRETE,
ECOSCREEDS
ADHESIVES
AND
ADMIXTURES
TILES
ANDFOR
STONE
MATERIALS,
PRE-BLENDED
All Mapei
Mapeiconform
grouting
mortars
for
ceramics
CONCRETE,
ECO
ADHESIVES
AND
ADMIXTURES
TILES
AND
STONE
MATERIALS,
PRE-BLENDED
MORTARS
AND
FOR
REPAIRING
All
adhesives
for
ceramics
and
grouting
mortars
for
ceramics
material
to
Standard
EN
12004.
ADHESIVE
AND
GROUTS
All Mapei
Mapeiconform
adhesives
for ceramics
ceramics
and stone
stone
ESIVES
AND GROUTS
FOR
CERAMIC
material
tomortars
Standard
EN
12004.
CONCRETE,
ECOSCREEDS
ADHESIVES
AND
ADMIXTURES
adhesives
for
and
stone
and
material
to
Standard
All
grouting
for
ceramics
MORTARS
FOR
AND
FOR
REPAIRING
material
conform
toconform
Standard
EN
12004.
FOR
CONCRETE
ARE
CE
MARKED
AND
CERTIFIED
MORTARS
FOR
SCREEDS
AND
FOR
REPAIRING
and stone
stoneconform
materialto
conform
toEN
Standard
FOR CERAMIC TILES
material
Standard
12004.
CONCRETE,
ECO
ADHESIVES
FOR
CONCRETE
ARE
CE
MARKED
AND
CERTIFIED
MORTARS
FOR
SCREEDS
AND
FOR
REPAIRING
AND
ADMIXTURES
All
Mapei
grouting
mortars
for
ceramics
M
material
conform
to
Standard
EN
12004.
EN
13888.
and
stone
material
conform
to
Standard
STONECONCRETE,
MATERIALS,
PRE-BLENDED
All
FOR
CONCRETE
ARE
CETHE
MARKED
AND
CERTIFIED
EN Mapei
13888.grouting mortars for ceramics
ECO
ADHESIVES
AND
ADMIXTURES
All Mapei
Mapei
grouting
mortars
for
ceramics
IN
COMPLIANCE
WITH
MOST
SEVERE
CONCRETE,
ECO
ADHESIVES
AND
ADMIXTURES
and
stone
material
conformfor
to ceramics
Standard
All Mapei
and
stone mortars
M adhesives for ceramics
EN
13888.
All
grouting
FOR
CONCRETE
and
stone
material
conform
to
Standard
ARE
CE
MARKED
AND
CERTIFIED
IN
COMPLIANCE
WITH
THE
MOST
SEVERE
CONCRETE,
ECO
ADHESIVES
AND
ADMIXTURES
All
grouting
for
adhesives
have
awarded
OR SCREEDS
AND FORARE
REPAIRING
and
stone
material mortars
conform
to ceramics
Standard
All Mapei
Mapei
adhesives
have been
been
awarded
IN
COMPLIANCE
WITH
THE
MOST AND
SEVERE
EN
13888.
material conform to Standard
EN
12004.
and
stone
material
conform
to
FOR
CONCRETE
MARKED
CERTIFIED
EN
13888.
EUROPEAN
AND
INTERNATIONAL
STANDARDS
FOR
CONCRETE
CE
MARKED
CERTIFIED
and
stone
material
conform
to Standard
Standard
the
CE
mark
in
with
EN
All
Mapei
adhesives
have been
awarded
IN
COMPLIANCE
WITHCE
MOST AND
SEVERE
EN
13888.
EUROPEAN
AND ARE
INTERNATIONAL
STANDARDS
FOR
CONCRETE
ARE
CETHE
MARKED
AND
CERTIFIED
the
CE
mark
in compliance
compliance
with
EN 12004,
12004,
IN
COMPLIANCE
M
m
EN
13888.
ECO ADHESIVES
AND
ADMIXTURES
EUROPEAN
INTERNATIONAL
grouting mortarsAll
forMapei
ceramics
EN
13888.
Annex
ZA,
Standard.
the
CE
mark
in compliance
withawarded
EN 12004,
All
adhesives
have been
been
awarded
IN COMPLIANCE
COMPLIANCE
WITH THE
THE MOST
MOST STANDARDS
SEVERE All Mapei
have
Annex
Standard.
m
m Mapei
wZA,adhesives
IN
WITH
SEVERE
EUROPEAN
All
Mapei
adhesives
have
been
awarded
AND
INTERNATIONAL
STANDARDS
IN
COMPLIANCE
WITH
THE
MOST
SEVERE
the
CE
mark
in
compliance
with
EN 12004,
12004,
and stone material conform
Standard
Annex
ZA,
Standard.
EUROPEAN
AlltoMapei
Mapei
adhesives
have been
been
awarded
the
CE
mark
in compliance
withawarded
EN
ETE ARE
CE
MARKED
AND
CERTIFIED
All
adhesives
have
EUROPEAN AND
AND INTERNATIONAL
INTERNATIONAL STANDARDS
STANDARDS
the CE
CE ZA,
mark
in compliance
compliance with
with EN
EN 12004,
12004,
Annex
Standard.
EN 13888.
EUROPEAN
the
mark
Annex
Standard.
w
m
m CE ZA,
w in
EUROPEAN
AND SEVERE
INTERNATIONAL STANDARDS
the
mark
in MORTARS
complianceFOR
withSCREEDS
EN 12004,
PRE-BLENDED
Annex
ZA,
Standard.
ANCE WITH
THE MOST
PRE-BLENDED
MORTARS
FOR
SCREEDS
Annex
ZA,
Standard.
All Mapei adhesives have been
awarded
Annex
ZA, Standard.
AND
SMOOTHING
SURFACES
PRE-BLENDED
MORTARS
FOR SCREEDS
AND
SMOOTHING
SURFACES
AND INTERNATIONAL STANDARDS
the CE mark in compliance
with
EN
12004,
PRE-BLENDED
MORTARS
FOR
SCREEDS
AND
SMOOTHING
SURFACES
PRE-BLENDED MORTARS FOR SCREEDS
Annex ZA, Standard.
PRE-BLENDED
MORTARS
FOR
SCREEDS
AND
SMOOTHING
SURFACES
Mapei
pre-blended
mortars
for
AND
SMOOTHING
SURFACES
PRE-BLENDED
MORTARS
SCREEDS
Mapei
pre-blended
mortarsFOR
for screeds
screeds
PRE-BLENDED
MORTARS
FOR
SCREEDS
AND
SMOOTHING
SURFACES
and
surfaces
comply
with
Mapei
pre-blended
mortars
for screeds
AND
SMOOTHING
SURFACES
and smoothing
smoothing
surfaces
comply
with
AND
SMOOTHING
SURFACES
Mapei
pre-blended
mortars
for
screeds
Mapei
pre-blended
mortars
forbeen
screeds
EN 13813
13813
standard
and have
have
and
smoothing
surfaces
comply
with
EN
standard
and
been
PRE-BLENDED MORTARSand
FOR
SCREEDS
smoothing
surfaces
comply
with
Mapei
pre-blended
mortars
forbeen
screeds
and
smoothing
comply
with with
awarded
the
CEsurfaces
mark
inhave
compliance
EN
13813
standard
andin
Mapei
pre-blended
mortars
for
screeds
awarded
the
CE
mark
compliance
with
AND SMOOTHING SURFACES
Mapei
pre-blended
mortars
forbeen\
screeds
EN
13813
standard
and
and
smoothing
surfaces
comply
with with
EN
13813
standard
andinhave
have
been
13813,
Annex
ZA.
awarded
the
CE
mark
compliance
and
smoothing
surfaces
comply
with
EN 13813,
Annex
ZA. in comply
and
smoothing
surfaces
with with
awarded
the
CE
mark
compliance
EN
13813
standard
and
have
been
awarded
the
CE
mark
in
compliance
Annex ZA.and have been with
ENfor13813,
13813
standard
Mapei
pre-blended
mortars
screeds
EN
13813
standard
and
have
been
EN
13813,
Annex
ZA.
B B k
awarded
theAnnex
CE mark
mark
in compliance
compliance with
with
UCTS ARE BASED ON THE MOST
EN
13813,the
ZA. in
awarded
CE
and smoothing
surfaces comply
with
awarded
theAnnex
CE mark
M
EN
13813,
ZA. in compliance with
EN
TECHNOLOG ES FOR
EN 13813
been Annex
EN 13813,
13813,
Annex ZA.
ZA.
m standard
m andmhave
awarded the CE mark
in
compliance
with
m
NTAL AND HUMAN WELLBE NG
EN 13813, Annex ZA.
G V
ARDASRDS ARDS AARRDDS S ARADRSDASRADRSDASRDS ARDS AARRDDS S ARADRSDASRDS
ANDAND AND TATANNDD TANTADNDTANTADNDTAND TAND TATNANDD TANTADNDTAND
ST ST ST
SS
S S S S S
S
SS
S S S
ITH EUROPEA
EW
N
NC WITH EUROPEA
E
N
NC
ITH EUROPEA
EW
N
NC
ILE ILE ILE
S
S S
HE HE HE
AD AD AD
ARDS
AND
ST
IN COMP
LIA
ILIELE
SS
HHE E DHDE HEDHE
AADD
AA A
GROUT
GROUT
GROUT
GROUT
®
®
BioBlock
MAPEI
BioBlock®
MAPEI PRODUCTS
PRODUCTS ARE
ARE BASED
BASED ON
ON THE
THE MOST
MOST D p ff
BioBlock
This
blocks
MAPEI
PRODUCTS
ARE
BASED
ON
THE
MOST
®
This Mapei
Mapei technology
technology
blocks various
various
®
INNOVATIVE
TECHNOLOGIES
FOR
M
BioBlock
types
of
mould
This
Mapei
technology
blocksand
various
ARE
BASED
ON
THE
MOST
INNOVATIVE
TECHNOLOGIES
FOR
MAPEI
PRODUCTS
® from
®®
types
of
mould
from forming
forming
and
INNOVATIVE
TECHNOLOGIES
FOR
BioBlock
BioBlock
®in humid
This
Mapei
technology
blocksand
various
PRODUCTS
ARE
BASED
ON
THE
MOST
proliferating
conditions.
types
of mould
from forming
BioBlock
MAPEI
PRODUCTS
ARE
BASED
ON
THE
MOST
ENVIRONMENTAL
AND
HUMAN
WELLBEING
PRODUCTS
ARE
BASED
ON
THE
MOST
proliferating
in
humid
conditions.
BioBlock
INNOVATIVE
TECHNOLOGIES
FOR
ENVIRONMENTAL
AND
HUMAN
WELLBEING
MAPEI
PRODUCTS
ARE
BASED
ON
THE
MOST
w
This
Mapei
technology
blocks
various
types
of
mould
from
forming
and
proliferating
in
humid
conditions.
This
Mapei
technology
blocks
various
ENVIRONMENTAL
AND HUMAN
WELLBEING
various
This
Mapei
technology
blocks
various
TECHNOLOGIES
FOR
INNOVATIVE
TECHNOLOGIES
FOR
TECHNOLOGIES
FOR
w
types
of
mould
from
forming
and
®
proliferating
in humid
conditions.
types
of
mould
from
forming
and
ENVIRONMENTAL
AND
HUMAN
WELLBEING BioBlock
INNOVATIVE
TECHNOLOGIES
FOR
types
of
mould
from
forming
and
types
of
mould
from
forming
and
DUCTSENVIRONMENTAL
ARE
BASED
ON
THE
MOST
proliferating in
in®humid
humid conditions.
conditions.
ENVIRONMENTAL AND
AND
HUMAN
WELLBEING
proliferating
AND
HUMAN
WELLBEING
proliferating
in
humid
conditions.
ENVIRONMENTAL
HUMAN
WELLBEING
This Mapei technology blocks
various in®humid conditions.
proliferating
ENVIRONMENTAL
AND
HUMAN
WELLBEING
DropEffect
TECHNOLOGIES FOR
®
DropEffect
types of mould from forming
and
DropEffect
Mapei
technology
based
®
®
Mapei
technology
based on
on the
the use
use
proliferating in humid conditions.
NTAL AND HUMAN WELLBEING
DropEffect
of special
hydrophobic
Mapei
technology
basedadditives,
on the use
®
of
special hydrophobic
additives,
®®
DropEffect
®
Mapei
technology
basedadditives,
on
the use
to
obtain
surfaces,
DropEffect
of
special
hydrophobic
DropEffect
to
obtain water-repellent
water-repellent
surfaces,
DropEffect
Mapei
technology
based
on
the use
use
special
hydrophobic
additives,
less
prone
to
and
with
obtain
water-repellent
surfaces,
technology
based
on
the
on o Mape s p oduc s and sys ems o Qua y toofMapei
less
prone
to dirtiness
dirtiness
and
with
Mapei
technology
based
on
the use
of
special
hydrophobic
additives,
to
obtain
surfaces,
excellent
durability.
less
pronewater-repellent
to dirtiness and
with use
of
special
hydrophobic
additives,
excellent
durability.
additives,
of
special
hydrophobic
additives,
to
obtain
surfaces,
less
pronewater-repellent
to dirtiness and
with
men a Managemen and Hea h and SaDropEffect
e y have been
excellent
durability.
to the
obtain
water-repellent
surfaces,
Mapei technology based on
use
water-repellent
surfaces,
to
obtain
water-repellent
surfaces,
less prone
pronedurability.
to dirtiness
dirtiness and
and with
with
excellent
less
to
special hydrophobic
less
prone
to dirtiness and
and with
with
y offic a s anda ds bod es acc ed edofand
ecognadditives,
sed
adurability.
excellent
durability.
excellent
to obtain water-repellent surfaces,
excellent durability.
durability.
excellent
ona eve
less prone to dirtiness and with
Certification
of
Mapei’s
products excellent
and
systems
for
Quality,
durability.
Certification
of
Mapei’s
and
for
Certification
of Management
Mapei’s products
products
and systems
systems
for Quality,
Quality,
Environmental
and Health
Health
and Safety
Safety
have been
been
Certification
of Management
Mapei’s products
and systems
for Quality,
Environmental
and
and
have
Environmental
Management
and Health
and Safety
have
been at
Certification
of
Mapei’s
products
and
systems
for
Quality,
issued
by
official
standards
bodies,
accredited
and
recognised
Certification
of Management
Mapei’s
products
and
systems
for
Quality,
Environmental
and Health
and Safety
have
been at
issued
by
official
standards
bodies,
accredited
and
recognised
issued
by
official
standards
bodies,
accredited
and
recognised
at
Environmental
Management
and
Health
and
Safety
have
been
international
level.
Environmental
Management
and
Health
and
Safety
have
been at
by official
standards
bodies,
accredited
and recognised
tion issued
of
Mapei’s
products
and
systems
for
Quality,
international
level.
international
level.standards bodies, accredited and recognised at
issued
by
official
issued
by official
standards
bodies,
accredited
and recognised at
international
level.
mental
Management
and
Health and
Safety
have been
international
level.
international
level.
y official
standards
bodies, accredited and recognised at
onal level.
Drop
Effect
Drop
®Effect
Drop
Effect
Drop
Drop
Effect
Effect
Drop
Drop
Effect
Effect
Drop
Effect
Drop
Effect
M
m
m
m
M
w
m
M
m
m
w
w
m
w
m 2000 the plant of Robbiano di
the
year
EMAS
Inthe
theyear
year2000
2000the
theplant
plantofofRobbiano
Robbianodidi
EMAS (Environmental
(Environmental Management
Management and
InIn
EMAS
(Environmental
Management
and
m is the EU
Mediglia
(Milan)
certification
In
the year
2000 obtained
the plantthe
of Robbiano
di
Audit
Scheme)
environmental
EMAS
(Environmental
Management
and
Mediglia
(Milan)
obtained
the
certification
Audit Scheme)
Scheme)
the EU
EU
environmental
Mediglia
(Milan)
obtained
the
certification
Audit
isis the
environmental
In
the
year
2000 obtained
thehealth
plantand
of Robbiano
di
of
its
occupational
safety
Mediglia
(Milan)
the
certification
EMAS
(Environmental
Management
and
management
system
in
accordance
with
the
Audit
Scheme)
is
the
EU
environmental
of
its
occupational
healthand
and
safety
management system
system in
in accordance
accordance with the
ofMediglia
itstheoccupational
health
safety
management
M
In
year
2000
the
plant
of
Robbiano
di
mmanagement
(Milan)
obtained
the
certification
management
system
in
accordance
of
its
occupational
health
and
safety with
EMAS
(Environmental
Management
and
Audit
Scheme)
is
the
EU
environmental
In
the
year
2000
the
plant
of
di
CE
761/01
regulation.
system
in
accordance
with
the
EMAS
(Environmental
and
management
system
inaccordance
accordance
with
In
the
year
2000
thehealth
of Robbiano
Robbiano
di
CE 761/01
761/01
regulation. Management
management
system
inplant
with
CE
regulation.
EMAS
(Environmental
Management
and
Mediglia
(Milan)
obtained
the
certification
of
its
occupational
and
safety
the
OHSAS
18001
standard,
as
well
as
management
system
in accordance
with
Audit
Scheme)
is the
the EU
EU
environmental
Mediglia
(Milan)
obtained
the
certification
CE
761/01
regulation.
management
system
in accordance
with the
Audit
Scheme)
is
environmental
theOHSAS
OHSAS
18001
standard,
as
well
as
Mediglia
(Milan)
obtained
the
certification
the
18001
standard,
as
well
as
Audit
Scheme)
is
the
EU
environmental
of its
itsOHSAS
occupational
health
and as
safety
management
system
in accordance
with
Certificate
of
Excellence
that
attests
the
18001
standard,
well
as
management
system in
in accordance
accordance with
with the
the
CE
761/01 regulation.
of
occupational
health
and
safety
management
system
the
Certificate
of
Excellence
that
attests
the year 2000 the plantthe
of its
Robbiano
disystem
of
occupational
health
andthat
safety
Certificate
ofofExcellence
attests
EMAS (Environmental Management
and
management
system in accordance withInthe
management
in
accordance
with
OHSAS
18001
standard,
as
well
as
to
its
compliance
with
the
requirements
the
Certificate
Excellence
that
attests
CE
761/01
regulation.
management
system
in
accordance
with
Mapei
takes
part
in
the
global
Responsible
CE
761/01
regulation.
toitsitscertification
compliance
withthe
requirements
Mediglia (Milan) obtainedtothe
management
system
inthe
accordance
with
Mapei
takes
part
Mapei
takes
part in
in the
the global
global Responsible
Responsible
compliance
Audit Scheme) is the EU environmental
CE
761/01
regulation.
the
OHSAS
18001
standard,
as
well
as
Certificate
ofwith
Excellence
that
attests
of
the
ISO
9001,
ISO
14001,
OHSAS
to
its
compliance
with
therequirements
requirements
the
OHSAS
18001
standard,
as
well
as
Care
initiative
developed
by
theResponsible
chemicalof its occupational health and
Mapei
takes part
in the global
ofthe
the
ISO9001,
9001,
ISO
14001,
OHSAS
safety
OHSAS
18001
standard,
as
well
as
Care
developed
by
Care initiative
initiative
developed
by the
the chemical
chemical
ofthe
ISO
ISO
14001,
OHSAS
management system in accordance
with
thein the global
thethe
Certificate
Excellence
that
attests
18001
standards
and
of
CE
761/01
of
ISO
9001,of
ISO
14001,
OHSAS
Mapei
takes
part
to
compliance
with
the
Certificate
Excellence
that
industry
for
the
chemical
industry,
and
Care
initiative
developed
by
theResponsible
chemical
18001
standards
and
ofthe
CErequirements
761/01
management system in accordance
with of
theits
Certificate
ofand
Excellence
that attests
attests
industry
for
chemical
industry,
and every
every
industry
for the
the
chemical
industry,
18001
standards
of
CE
761/01
CE 761/01 regulation.
to
its
compliance
with
the
requirements
Mapei
takes
part
in
the
global
Responsible
(EMAS)
Regulation.
18001
standards
and
of
CE
761/01
Care
initiative
developed
by
the
chemical
of
the
ISO
9001,
ISO
14001,
OHSAS
to
its
compliance
with
the
requirements
year
publishes
an
Environmental
Declaration
industry
for
the
chemical
industry,
and
every
Mapei
takes
part
in
the
global
Responsible
(EMAS)
Regulation.
the OHSAS 18001 standard,
as
well
as
to
its
compliance
with
the
requirements
year
publishes
an
Environmental
Declaration
Mapei
takes
part
in
the
global
Responsible
year
publishes
an
Environmental
(EMAS)
Regulation.
of
the
ISO
9001,
ISO
14001,
OHSAS
18001
standards
and14001,
of CE 761/01
Care
initiative
developed
by
the chemical
chemical
(EMAS)
Regulation.
industry
for
thedeveloped
chemical
industry,
and every
of the
thethat
ISO
9001, ISO
ISO
OHSAS
for each
each
facility.
year
publishes
an
Environmental
Declaration
Care
initiative
by
the
the Certificate of Excellence
attests
of
ISO
9001,
OHSAS
for
facility.
Care
initiative
by
the
chemical
for each
each
facility.
18001
standards
and14001,
of CE
CE 761/01
(EMAS)
Regulation.
industry
for
thedeveloped
chemical
industry,
and every
every
year
publishes
an
Environmental
Declaration
standards
and
for
facility.
industry
for
the
chemical
industry,
and
to its compliance with the 18001
requirements
18001
standards
and of
of CE 761/01
761/01
Mapei takes part in the global
Responsible
industry
for
thean
chemical
industry,Declaration
and every
(EMAS)
Regulation.
year
publishes
Environmental
for
each
facility.
(EMAS)
Regulation.
year
publishes
an
Environmental
Declaration
of the ISO 9001, ISO 14001,
OHSAS
(EMAS)
Regulation.
Care initiative developed by
the
chemical
year
publishes
an
Environmental
Declaration
for each
each facility.
facility.
for
industry for the chemical industry,
every
for
each and
facility.
M18001 standards and of CE 761/01
(EMAS) Regulation.
year publishes
W an Environmental
M Declaration
for each facility.
M
m
w
m
m
w
M
M
ADHESIVESmFOR
MORTARS
ADHESIVES
FOR RESILIENT,
RESILIENT,
MORTARS FOR
FOR RENDER
RENDER
TEXTILE,
CERAMIC
ADHESIVES
FOR AND
RESILIENT,
MORTARS FOR RENDER
TEXTILE, WOOD
WOOD
AND
CERAMIC
ADHESIVES
FOR
RESILIENT,
FORfor
RENDER
Mapei
mortars
render
FLOORS AND
AND
COATINGS
TEXTILE,
WOOD
AND CERAMIC
M
mMORTARS
ADHESIVES
FORCOATINGS
RESILIENT,
MORTARS
FOR
RENDER
Mapei
mortars
for
render have
have been
been awarded
awarded the
the
FLOORS
ADHESIVES
FOR
RESILIENT,
MORTARS
FOR
RENDER
TEXTILE,
WOOD
AND
CERAMIC
CE
mark
in
compliance
998
standard.
Mapei
mortars
for
renderwith
haveEN
awarded
the
FLOORS
AND
COATINGS
m
ADHESIVES
FOR
RESILIENT,
MORTARS
RENDER
TEXTILE,
WOOD
AND
CERAMIC
CE
mark
inFOR
compliance
ENbeen
998awarded
standard.the
ADHESIVES
FOR
RESILIENT,
MORTARS
FOR
RENDER
Mapei
mortars
for
renderwith
have
TEXTILE,
WOOD
AND
CERAMIC
Mapei
mortars
for
render
haveENbeen
been
FLOORS
AND
COATINGS
CE
mark
in
compliance
with
998 awarded
standard.the
Since
October
2005,
Mapei’s
Eco
range
of
M
w
w
m
m
w
TEXTILE,
WOOD
AND
CERAMIC
FLOORS
AND
COATINGS
GEV
Since October
2005,
Eco range of
TEXTILE,
WOOD
ANDMapei’s
CERAMIC
GEV
with
EN
998
standard.
Mapei
mortars
for
render
have
been
awarded
FLOORS
AND
COATINGS
CE
mark
in
compliance
Since
October
2005, tested
Mapei’s
Eco
range of
with
ENbeen
998 awarded
standard.the
products,
previously
by
qualified
m
m
Mapei
mortars
for
render
have
the
FLOORS
AND
COATINGS
products,
previously
tested
by
qualified
ADHESIVES
FORGEV
RESILIENT,
M
Mapei
mortars
for
render
have
been
awarded
FLOORS
AND
COATINGS
PRODUCTS
AND
SYSTEMS
FOR
PROTECTING
Since
October
2005,
Eco
range
ofof
CE
mark in
in AND
compliance
withFOR
EN PROTECTING
998 standard.
standard.the
Since
October
2005,Mapei’s
Mapei’s
Eco
range
PRODUCTS
SYSTEMS
products,
previously
tested
by
qualified
international
institutes
such
as
the
German
CE
mark
compliance
with
m
TEXTILE, WOODGEV
ANDwCERAMIC
international
institutes
such
as
therange
German
CE
mark in AND
compliance
with EN
EN 998
998 standard.
AND
CONCRETE
PRODUCTS
products,
previously
byby
qualified
Since
October
2005,tested
Mapei’s
Eco
of
products,
previously
tested
qualified
AND REPAIRING
REPAIRING SYSTEMS
CONCRETEFOR PROTECTING
international
institutes
such
as
therange
German
Institute
TFI-Teppich
Forschungsinstitut
Since
October
2005,
Mapei’s
Eco
m
GEV
GEV
M of
w
FLOORS AND COATINGS
Institute
TFI-Teppich
Forschungsinstitut
Since
October
2005, tested
Mapei’s
Eco
range
of m
PRODUCTS
AND SYSTEMS
SYSTEMS
FORPROTECTING
PROTECTING
AND
REPAIRING
CONCRETE
GEV international
institutes
such
as
the
German
PRODUCTS
AND
FOR
products,
previously
by
qualified
international
institutes
suchand
asqualified
the (the
German
Institute
TFI-Teppich
Forschungsinstitut
(carpet research
research
institute)
CRI
products,
previously
tested
by
winstitute)
Mapei
products
and
systems
for
protecting
PRODUCTS
AND
SYSTEMS
m
m
wAND
REPAIRING
CONCRETE
(carpet
and
CRI
products,
previously
tested
by
Mapei
products
and
systemsFOR
for PROTECTING
protecting and
and
PRODUCTS
AND
SYSTEMS
FOR
PROTECTING
Institute
TFI-Teppich
Forschungsinstitut
AND REPAIRING
CONCRETE
international
institutes
such
asqualified
the (the
German
M
Institute
TFI-Teppich
Forschungsinstitut
PRODUCTS
ANDand
SYSTEMS
PROTECTING
(carpet
research
and
(the
American
Carpet
and
Institute),
have
international
institutes
such
as
the
German
w
repairing
concrete
structures
have
been
Mapei
products
systemsFOR
for
protecting
AND
REPAIRING
CONCRETE
Since October
2005, Mapei’s
Ecoresearch
range
of institute)
American
Carpet
and Rug
Rug
Institute),
have been
been
international
institutes
such
as CRI
the(the
German
repairing
concrete
structures
have
been and
AND
REPAIRING
CONCRETE
GEV
(carpet
and
Institute
TFI-Teppich
Forschungsinstitut
(carpet
research
institute)
andCRI
CRI
(the
AND
CONCRETE
Mapei
products
and
systems
for
protecting
and
American
Carpet
and EMICODE
Rug
Institute),
have
been
certified
and
labelled
EC1
"very
low
Institute
TFI-Teppich
Forschungsinstitut
m tested
w institute)
awarded
the
CE
mark
in
compliance
with
EN
1504
repairing
concrete
structures
have
been
MapeiREPAIRING
products
and
systems
for
protecting
and
products, previously
by
qualified
M
certified
and
labelled
EMICODE
EC1
"very
low
Institute
TFI-Teppich
Forschungsinstitut
awarded
the
CE
mark
in
compliance
with
EN
1504
American
Carpet
and
Rug
have
been
(carpet research
research
institute)
and CRI
CRI
(the
PRODUCTS
FOR PROTECTING
Mapei
products
and
systems
for
protecting
and
American
Carpet
and
RugInstitute),
Institute),
have
been
repairing
concrete
structures
have
been
certified
and
labelled
EMICODE
EC1
"very
low AND SYSTEMSawarded
standard.
the
mark
in compliance
with EN
1504
emission
level
of
volatile
organic
compounds"
(carpet
and
(the
w such
Mapei
products
systems
for
protecting
and
repairing
concrete
have
been
international institutes
as theand
German
mlow
w CE and
standard.
emission
level
of institute)
volatile
organic
compounds"
(carpet
research
institute)
and EC1
CRI
(the
Mapei
products
andstructures
systems
for
protecting
and
certified
labelled
EMICODE
"very
American
Carpet
and
Rug
Institute),
have
been
AND
REPAIRING CONCRETE
repairing
concrete
structures
have
been
certified
and
labelled
EMICODE
EC1
"very
low
awarded
the
CE
in
compliance
with EN
EN
1504
standard.
emission
level
of and
volatile
organic
compounds"
and
Plus
"very
low
emission
level
of
American
Carpet
Rug
Institute),
have
repairing
concrete
structures
have
awarded
the
CE mark
mark
in compliance
with
1504
InstitutemTFI-Teppich Forschungsinstitut
m
m
w
and EC1
EC1level
Plus
"very
low
emission
level
of been
American
Carpet
and
Rug
Institute),
have
been
repairing
concrete
structures
have been
been
emission
of
volatile
organic
compounds"
certified
and
labelled
EMICODE
EC1
"very
low
awarded
the
CE
mark
in
compliance
with
EN
standard.
and
EC1
Plus
"very
low
emission
level
of low
emission
levellabelled
ofcompounds-Plus",
volatile
organicEC1
compounds"
volatile
organic
compounds-Plus",
recognised
certified
and
labelled
EMICODE
EC1
"very
low
awarded
the CE
CE mark
mark
in compliance
compliance with
with EN
EN 1504
1504
standard.
(carpet research institute)and
andEC1
CRIPlus
(the
Mapei
products
and
systems
for
protecting
and
volatile
organic
recognised
certified
and
EMICODE
"very
awarded
the
in
1504
"very
low
emission
level
ofof was
standard.
emission
level
ofcompounds-Plus",
volatile
organic
compounds"
and
EC1
Plus
"very
low
emission
level
volatile
organic
recognised
standard.
by
GEV.
The
certification
of
these
products
emission
level
of
volatile
organic
compounds"
American Carpet and Rugvolatile
Institute),
have
repairing
have been
standard.
by
GEV.
The
certification
of
these compounds"
products
wasconcrete structures
emission
level
ofbeen
volatile
organic
organic
compounds-Plus",
recognised
and
EC1
Plus
"very
emission
level
of
ADMIXTURES
FOR CONCRETE
volatile
organic
compounds-Plus",
recognised
by
GEV.
The
certification
of these
products
wasthe CE mark in compliance
recently
widened
to low
include
Der Blaue
Blaue
Engel
and
EC1
Plus
"very
low
emission
level
of
ADMIXTURES
certified and labelled EMICODE
EC1
"very
low
awarded
withFOR
EN CONCRETE
1504
recently
widened
to
include
Der
Engel
EC1
Plus
"very
low
emission
level
of
byand
GEV.
The
certification
of
these
products
was
volatile
organic
compounds-Plus",
recognised
ADMIXTURES
FORCONCRETE
CONCRETE
by
GEV.
The
certification
of these
products
was
recently
widened
to include
Der Blaue
Engel
(Blue
Angel),
aa German
ecological
label
which
volatile
organic
compounds-Plus",
recognised
ADMIXTURES FOR
standard.
emission level of volatile recently
organic
compounds"
Mapei
superplasticizers
(Blue
Angel),
German
ecological
label
which
volatile
organic
compounds-Plus",
recognised
widened
totoinclude
Der
ADMIXTURES
FORand
CONCRETE
by
GEV.
The
certification
ofrespect
these
products
was
Mapei plasticizers
plasticizers
and
superplasticizers
recently
widened
include
DerBlaue
Blaue
Engel
(Blue
Angel),
German
ecological
labelEngel
which
identifies
products
which
the
by
GEV.
The
certification
of
these
products
was
and EC1 Plus "very low emission
level
ofaGerman
for
mortars
and
concrete
have
Mapei
plasticizers
and
superplasticizers
identifies
products
which
the
by
GEV.
The
ofrespect
these
products
was
ADMIXTURES
FOR
CONCRETE
(Blue
Angel),
acertification
ecological
label
Mapei
plasticizers
and
superplasticizers
for
mortars
andFOR
concrete
have been
been awarded
awarded
recently
widened
to
include
Der
Engel
ADMIXTURES
CONCRETE
(Blue
Angel),
afloor
German
ecological
labelwhich
which
identifies
products
which
respect
the
environment,
layers
recently
widened
tolayers
include
Der Blaue
Blaue
Engel
ADMIXTURES
FOR
CONCRETE
Mapei
plasticizers
and
superplasticizers
volatile organic compounds-Plus",
recognised
the
CE
mark
in
compliance
with
EN
934-2
for
mortars
and
concrete
have
been
awarded
environment,
floor
recently
widened
to
include
Der
Blaue
Engel
identifies
products
which
respect
the
for mortars
concrete
have
been
the
CE markand
in compliance
with
EN awarded
934-2
(Blue
Angel),
afloor
German
ecological
label which
which
identifies
products
which
respect
the
environment,
layers
and
end
users.
(Blue
Angel),
a
German
ecological
label
Mapei
plasticizers
and
for
mortars
and
concrete
have
been
awarded
and
934-4
standards.
the
CE
mark
in
compliance
with
EN 934-2
934-2
by GEV. The certification environment,
of(Blue
these
products
was
Mapei
plasticizers
and superplasticizers
superplasticizers
and
end
users.
Angel),
a German
ecological
label which
floor
layers
the
CE
mark
in
compliance
with
EN
and
934-4
standards.
identifies
products
which
respect
the
Mapei
plasticizers
and
superplasticizers
environment,
floor
layers
and
end
users.
identifies
products
respect
the
ADMIXTURES FOR CONCRETE
for mortars
mortars
and
concrete have
have
been
awarded
the
CE
mark
in compliance
with
EN awarded
934-2
and
934-4
standards.
recently widened to include
Der
Blaue
Engelwhich
for
and
concrete
been
identifies
products
which
respect
the
and
end
users.
and
934-4
standards.
for mortars
and
concrete have
been
awarded
environment,
floor layers
layers
and
end label
users.which
environment,
floor
the
CE
mark
in
compliance
with
EN
934-2
and
934-4
standards.
(Blue
Angel), a German ecological
the
CE
mark
in
compliance
with
EN
w Du
environment,
floor
layers
d and
h psuperplasticizers
nthe nCE mark
g nd
MapeiDplasticizers
in compliance with EN 934-2
934-2
and end
end users.
users.
and
and
934-4
standards.
and 934-4
934-4
standards.
M identifieswproducts which respect
and endthe
users.
fornmortars
been awarded
and
standards.
nmandnconcrete
D have
gn
menvironment, floor layers
m
w
the CE mark in compliance with EN 934-2
w
and end users.
and 934-4 standards.
m
% w
m
EMICODE®
ILE ILEILE
S S S
G
T
GR
RO
OU
UT
m
m
EU P
H EURRO
WITTH
OPEEAN
AN
CEE WI
NNC
SIV
T
E TH EURO IC
SIVCESWFIITOHRECUERROAPPEMAN T
E IC
N EESWF
C OHRECUERROAP MAN
EA T
SINV E WITH EURO
P INC
NCEE SWFIT
AEMA
UERR
NC WITOHREC
OPE N
AN
E
C
SSNIIVVE ITH EUROP IC TT
EE SSWFFOR CERAEM
AINC
M
C
A
O
R
R CE
N
SI
T
EU OP MIC T
SIVVESWFIITTOH
ROPEEA C
H EUR
IN
CEE W R CERA
SNNIVCE S FOR CERAMAN T
ES F
MIC
UERR
OA
TOHREC
P
GIR
EW
URTOPEAN
ITHOEU
EA
NCE W
G OEU
N
NC WIR
TH URTOPE
A
E
NC GRO T N
U
ITH EUROPEA
EW
N
NC
m
M
m
COIONPMICNOCMOMININCCOOMM IN COM
IN CIONMICNPOCMOPMPININCCOOMMP P IN COM
INP CIONM
INPCIONMCPOMP
LIA LIALIA
LILAIA
LIA INPLCIM
LIA LIA LIA
A LIPALIAPLIPALIA PLPILAIA
M
m
EMICODE®
EMICODE®
EMICODE®®
EMICODE
EMICODE®
EMICODE®
EMICODE®
EMICODE®
Ou
Low
Low
Low
mm m n
M
Low
Low
M
Low
Low
Low Dust
Dust
Low
Dust
Mapei’s
Low
Dust
reduces
Mapei’s
Low nm
Dust technology
technology
reduces dust
dust
h Dust
n Low
n mixing, working
Low
emissions
during
Mapei’s
Dustthe
technology
reduces and
dust
emissions
during
the
mixing, working
and
Low Dust
Low
Mapei’s
Low
Dustthe
technology
reduces
dust
application
phases
of mixing,
powdered
products
emissions
during
working
and
Low
Low Dust
Dust
application phases of powdered products
Mapei’s
Low
Dust
technology
reduces
dust
emissions
during
the
working
and
by
90%,
with
advantages
particularly
for
the
application
phases
of mixing,
powdered
products
Mapei’s
Dust
technology
reduces
dust
Mapei’s
Low
Dust
technology
reduces
by
90%, Low
with
advantages
particularly
for
the
Mapei’s
Low
Dust
technology
reduces
dust
emissions
during
mixing,
working
and
application
phases
of health
powdered
products
environment
and
the
of
installers
by
90%, with
advantages
particularly
for
the
emissions
during
mixing,
and
environment
and
the
health
ofworking
installers
emissions
during
the
mixing,
emissions
during
mixing,
working
andthe D
application
phases
of health
powdered
products
by
90%, with
advantages
particularly
for
environment
and
theof
of installers
application
phases
powdered
products
m
application
phases
of
powdered
products
M
w
application
phases
powdered
products
by
90%, with
with
advantages
particularly
for the
the
n nm
environment
and
theof health
of installers
by
90%,
advantages
particularly
for
by 90%,
90%, with
withand
advantages
particularly
m m
m Our
w
by
advantages
particularly
for the
w
environment
the
health
of
installers
commitment
to
the
environment
environment
and
the
health
of
installers
Our
commitment
to the
environment
environment
and the
the health
health
of installers
installers.
wenvironment
and
of
Our
commitment
to the
environment
More
than
150
MAPEI
products
assist
Project
More commitment
than 150 MAPEI products
assist Project
% w
Our
to the
environment
More
than and
150 Contractors
MAPEI products
assist
Project
Designers
create
innovative
m
Designers
and
Contractors
create
innovative
Our
to
the
environment
More
than
150(The
MAPEI
products
assist
Project
Our
commitment
to
the
environment
Our commitment
commitment
to
environment
Designers
and
Contractors
create
innovative
LEED
Leadership
in
Energy
and
Our
commitment
tothe
the
environment
LEED
Leadership
in
Energy
and
More than
than
150(The
MAPEI
products
assist
Project
Designers
and
Contractors
create
innovative
More
150
MAPEI
products
assist
Project
LEED
(The
Leadership
in
Energy
and
Environmental
Design) certified
certified
projects,
More
150
MAPEI
assist
Project
More than
than
150Contractors
MAPEI products
products
assist
Project
Design)
projects,
and
create
innovative
LEED
(The
Leadership
incertified
Energy
and
Designers
and
Contractors
create
innovative
Ou
mm m n Designers
hcompliance
nEnvironmental
nm
nthe U.S.
Environmental
Design)
projects,
Designers
and
Contractors
create
innovative
in
with
Green
Building
Council.
Designers
and
Contractors
create
innovative
in compliance
with Leadership
the U.S.
Green
Building
Council.
LEED (The
(The
Leadership
incertified
Energy
and
Environmental
Design)
projects,
LEED
in
Energy
and
M
M
LEED
in
and
in compliance
with Leadership
the U.S. Green
Building
Council.
LEED (The
(The
Leadership
in Energy
Energy
and
Environmental
Design)
certified
projects,
in compliance
with the Design)
U.S.
Green
Building
Council.
certified
projects,
Environmental
certified
projects,
in
Environmental
Design)
certified
projects,
incompliance
compliance
with
the
U.S.
Green
Building
Council.
with
thethe
U.S.
Green
Building
Council.
in
compliance
with
U.S.
Green
Building
in compliance with the U.S. Green Building Council.
Council.
m
m
w
Low Du
Low
Low
d
n
LEED
LEED -- Leadership
Leadership in
in Energy
Energy and
and
LEED
- Leadership
in Energy and
Environmental
Design
Environmental
Design
LEED
- Leadership
in Energy and
Environmental
Design
Certification
developed
by
the
US
Green
Building
LEED
in
and
LEED---Leadership
Leadership
inEnergy
Energy
and
Certification
developed
byin
theEnergy
US Green
Building Council
Council
LEED
and
Environmental
Design
LEED
- Leadership
Leadership
and
for
the
and
construction
eco-compatible
buildings.
Certification
byintheEnergy
USof
Building Council
Environmental
for
the design
designdeveloped
andDesign
construction
ofGreen
eco-compatible
buildings.
Environmental
Design
Environmental
Design
Certification
by the USofGreen
Building Council
for
the designdeveloped
and construction
eco-compatible
buildings.
Environmental
Design
developed
by
the
US
Green
Building
Council
for
Certification
developed
by
the
Building
h p Certification
nfor
n
g
nd
the
design
and
construction
of
eco-compatible
buildings.
Certification developed
developed by
by the
the US
US Green
Green Building
Building Council
Council
Certification
Council
the
design
and
construction
of
eco-compatible
buildings.
for the
the design and
and construction of
of eco-compatible buildings.
buildings.
for
D gn
for the design
design and construction
construction of eco-compatible
eco-compatible buildings.
m
THE CERTIFIED CHOICE
“ECO” CERTIFIED PRODUCTS FOR LAYING
RESILIENT AND TEXTILE FLOORS AND COVERINGS
PRODUCTS WHICH ARE SAFE FOR THE
ENVIRONMENT, FLOOR-LAYERS AND END USERS
More than 150 MAPEI products to help designers and contractors to innovate
LEED projects which comply with the Green Building Council requirements
Mapei’s products for the installation of resilient and textile floor and wall
coverings show a wide selection of products which safeguard the environment
and which are certified and labelled EMICODE EC1 - very low emission level of volatile
organic compound awarded by GEV (Gemeinschaft Emissionskontrollierte
Verlegewerkstoffe Kebstoffe und Bauprodukte e.V) an association which checks
emissions from products for flooring and of which Mapei is an associate member.
ECO PRIM T
EC1 PLUS
ULTRABOND ECO FIX
ECO PRIM GRIP
EC1 PLUS
ULTRABOND ECO S945 1K
EC1 R PLUS
EC1 R PLUS
ULTRABOND ECO S955 1K
EC1 R PLUS
FIBERPLAN
EC1
LATEXPLAN TRADE
EC1
ULTRABOND S965 1K
EC1 R PLUS
MAPEPROOF 1K TURBO
EC1
ULTRABOND S997 1K
EC1 R PLUS
EC1 PLUS
ULTRABOND ECO TACK
EC1
NIVORAPID
EC1 RR PLUS
PLUS
EC1
EC1
ULTRABOND ECO VS90
EC1
PLANIPATCH
EC1 PLUS
ULTRABOND P990 1K
EC1 R PLUS
PLANITEX D10
EC1 PLUS
ULTRABOND SUPER GRIP
EC1 R PLUS
ULTRAPLAN
EC1 R PLUS
EC1 R PLUS
ULTRAPLAN ECO
EC1 R PLUS
ULTRABOND ECO 170
EC1 PLUS
ULTRAPLAN MAXI
EC1 R PLUS
ULTRABOND ECO 380
EC1 PLUS
ULTRAPLAN RENOVATION
SCREED
ULTRABOND ECO 520
EC1 PLUS
MAPESONIC CR
EC1
SILWOOD
TOPCEM PRONTO
ULTRAPLAN RENOVATION
SCREED
EC1
EC1
•
XXXXXXXXXXXXXXXXX
Screeds & screed repair
12
13
Screeds & screed repair
Eporip Turbo
TECHNICAL DATA:
Consistency: Component A: fluid paste; Component
B: fluid paste.
Colour: Component A: grey; Component B: white.
Mixing ratio: Component A : Component B = 500 : 8.
Flammable
Application temperature range: from +5° C to
+30° C.
Setting time: 20 - 30 minutes.
Workability: 7 minutes.
Storage: 12 months.
Application: By trowel or by pouring.
Consumption: 1.7 kg per litre of cavity to be filled.
Packaging: 508 g metal cans (Part A: 500 g;
Part B: 8 g).
Very fast hardening, twocomponent, polyester resin
for sealing cracks in screeds.
By adding dry sand it can be
used to manufacture mortars
for small repairs. Hardens in
approximately 20 minutes.
Mapecem
TECHNICAL DATA:
Install resilient and wood materials after only 24 hrs.
Recommended mixing ratio: 350-450 kg of
MAPECEM for 1 m³ of aggregates (diameter from 0 to
8 mm) and with 80 - 160 kg of water dependent on the
moisture content of the aggregate.
Workability time: 20 - 30 minutes.
Set to light foot traffic: after 2 - 3 hours.
Waiting time before applying floor finish:
– 3 hours for ceramic tiles and natural stone material;
– 24 hours for agglomerate stone, resilient and wood
flooring.
Moisture level after 24 hours: less than 2% w/w.
Storage: 12 months.
Application: pump or hand.
Consumption: 3.5 - 4.5 kg/m² per cm of thickness.
Packaging: 20 kg bags.
N.B. Use in combination with PLANICRETE for
bonded screeds.
Special fast-setting cement for
the preparation of fast-drying
screeds (24 hours) with controlled
shrinkage. For the formation of
bonded, un-bonded, floating and
heated screeds on new or existing
substrates for the installation of
moisture sensitive flooring or any
other type of flooring where fastdrying screeds are required. Mix
with graded aggregates and water.
Install ceramic tiles and natural stone
materials after just 3 hours. Install
agglomerate stone, resilient and
wood materials after only 24 hours.
Mapecem Pronto
Ready to use, pre-packed mortar
wih controlled shrinkage for fastsetting and drying screeds (24
hours) with controlled shrinkage.
For the formation of bonded,
un-bonded, floating and heated
screeds on new or existing
substrates for the insulation
of moisture sensitive flooring
or any other type of flooring
where fast-drying screeds are
required. Just mix with water,
ideal where logistics involved in
mixing conventional sand:cement
screeds can be difficult.
14
CEMENTITIOUS
SCREEDS
C60-F10
A1fl
IN COMPLIANCE WITH EUROPEAN STANDARDS
EN13813
EN 13813
TECHNICAL DATA:
Mixing ratio: one 25kg bag of MAPECEM PRONTO
with 2.1 - 2.3 litres of water.
Open time of the mixture: 20 - 30 minutes.
Application temperature range: from +5° C to
+35° C.
Set to light foot traffic: after 2 - 3 hours.
Waiting time before applying floor finish:
- 3 hours for ceramic tiles and natural stone material;
- 24 hours for resilient and wood flooring
Moisture level after 24 hours: less than 2% w/w.
Consumption: Approx. 20 kg/m² per cm of thickness.
Packaging: 25 kg.
15
Screeds & screed repair
Prosfas
TECHNICAL DATA:
Drying time: varies according to the absorbency of
the substrate.
Consistency: liquid.
Colour: transparent.
Non-flammable
Application temperature range: from +5° C to
+35° C.
Storage: 24 months. Protect from frost.
Application: by roller, brush or watering can.
Consumption: 0.5 - 0.7 kg/m².
Packaging: 25 kg drums.
Solvent-free silicate based
dust-proofer for cementitious
substrates. For the consolidation
of concrete and hardening
cementitious screeds that tend to
crumble on the surface. To prevent
the formation of an anti-adhesive
film, sprinkle dry sand on the
surface of the final coat to facilitate
bonding of the next treatment. The
substrate must be dry and clean,
free of oil, grease, paint and any
loose particles.
Topcem
TECHNICAL DATA:
Recommended mixing ratio: 200 - 250 kg of
TOPCEM with 1 m³ of aggregates (diameter from 0 to
8 mm) and 110 - 130 kg of water for dry aggregate.
Workability time: 40 - 60 minutes.
Set to light foot traffic: after 12 hours.
Waiting time before applying floor finish: 24 hours
for ceramic tiles, 2 days for natural stone and 4 days
for agglomerate stone, resilient and wood flooring.
Moisture level after 4 days: less than 2% w/w.
Storage: 12 months.
Application: pump or hand.
Consumption: 2 - 2.5 kg/m² per cm of thickness.
Packaging: 20 kg bags.
Special fast drying, normal setting
cement for the preparation of
shrinkage controlled screeds. For
the formation of bonded, unbonded,
floating and heated screeds on new
or existing substrates. Suitable for
interior and exterior use, Topcem
mixed with suitably graded
aggregates and water, hardens
within 24 hours, shortening project
times significantly. Install ceramic
tiles after just 24 hours. Install stone
materials after just 2 days. Install
resilient and wood materials after
only 4 days.
N.B. Use in combination with PLANICRETE and water
to produce a slurry for bonded screeds up to 50 mm.
Topcem Pronto
Ready to use, pre-packed normal
setting mortar with controlled
shrinkage for fast drying screeds.
For the formation of bonded,
un-bonded, floating and heated
screeds on new or existing
substrates for the installation of
moisture sensitive flooring or any
other type of flooring where fastdrying screeds are required. Just
mix with water, ideal solution
where logistics involved in mixing
conventional sand:cement
screeds can be difficult.
16
CEMENTITIOUS
SCREEDS
C30-F6
A1fl
IN COMPLIANCE WITH EUROPEAN STANDARDS
EN13813
TECHNICAL DATA:
Mixing ratio: one 25 kg bag of TOPCEM PRONTO
with 1.7 l of water.
Open time of the mixture: 40 - 60 minutes.
Application temperature range: from +5° C to
+35° C.
Set to light foot traffic: after 12 hours.
Waiting time before applying floor finish: 24 hours
for ceramic tiles, 2 days for natural stone and 4 days
for agglomerate stone, resilient and wood flooring.
Moisture level after 4 days: less than 2% w/w.
EMICODE: EC1 R - very low emission.
Storage: 12 months.
Consumption: 18 - 20 kg/m² per cm of thickness in
relation to the degree of compaction.
Packaging: 25 bags.
EN 13813
17
Primers
18
19
Primers
Eco Prim Grip
Multi-purpose water-based
adhesion promoting primer for
use on both absorbent and
non-absorbent substrates such
as render, plywood, plaster,
existing paint and old ceramic
tiles. Provides an exceptional
key and high grip surface.
Extremely low VOC. For interior
and exterior use. For use prior
to the installation of ceramic
tiles or beneath Mapei levelling
compounds.
Eco Prim T
Water-based, solvent free acrylic
primer for interior use. Suitable
for priming gypsum walls and
suitably prepared calcium
sulphate screeds. Ideal for
priming before the installation of
MAPEI levelling compounds. Very
low VOC. Suitable for use on
both absorbent and
non-absorbent substrates.
Mapeprim SP
Two-component, solvent-free
primer for the internal bonding of
levelling/smoothing compounds
on non-absorbent and difficult
substrates.
20
TECHNICAL DATA:
Consistency: creamy liquid.
Colour: grey.
Waiting time before applying render: 15 - 20
minutes.
Waiting time before applying smoothing
compounds: 30 minutes.
EMICODE: EC1 Plus - very low emission.
Storage: 24 months.
Application: by roller and brush.
Consumption: 0.20 - 0.30 kg/m².
Packaging: 10 and 5 kg drums.
TECHNICAL DATA:
Consistency: liquid.
Colour: white.
Flammability: no.
Application temperature range: from +5° C to +40° C.
EMICODE: EC1 Plus - very low emission.
Storage: 24 months. Protect from frost.
Application: by roller and brush.
Consumption: 200 m² per 20 kg; 50 m² per 5 kg.
Packaging: 20 and 5 kg drums.
TECHNICAL DATA:
Consistency: Component A: liquid; Component B:
liquid.
Colours: Component A: light blue; Compnent B: white.
Non-flammable
Application temperature range: from +5° C to
+40° C.
Pot life: approx. 3 hours.
Mixing ratio: Component A : Component B = 1 : 1.
Waiting time before application of smoothing
compound: 1-3 hours depending on the conditions.
Maximum time for application of smoothing
compound: 24 hours.
Storage: 24 months.
Application: by brush, roller or flat trowel.
Consumption: approx. 80 m² per 8 kg; 40 m² per 4 kg.
Packaging: 4+4 kg & 2+2 kg kits.
21
Levelling Compounds
22
23
Levelling Compounds
Latexplan Trade
Trade levelling and smoothing
compound protein-free
with low odour and high
compressive strength.
For levelling or smoothing
differences in thicknesses of
1 - 10 mm to receive all types
of floor coverings. Suitable for
underfloor heating. Suitable for
use under MAPEPROOF 1K
TURBO, MAPEPROOF ESM
& MAPEPROOF ONE COAT
surface membranes.
Latexplan
Premier levelling and
smoothing compound, proteinfree with low odour and
high compresive strength.
For levelling or smoothing
diferences in thicknesses of
1 - 10 mm to receive all types
of floor coverings. Suitabe for
underfloor heating. Suitable for
use under MAPEPROOF 1K
TURBO, MAPEPROOF ESM
& MAPEPROOF ONE COAT
surface membranes.
Planitex D10
Alpha hemi-hydrate based selflevelling compound. Very low
emissions of VOC, chromate
free, pumpable, from 1 - 15 mm
thickness.
24
TECHNICAL DATA:
Consistency: fine powder.
Colour: grey.
Pot life: 20 to 30 minutes.
Setting time: 45 - 60 minutes.
Set to light foot traffic: 1.5 - 2 hours.
Waiting time before installation: after at least
12 hours.
Application temperature range:
from +5° C to +35° C.
EMICODE: EC1 - very low emission.
Storage: at least 12 months.
Application: trowel or spiked roller.
Consumption: 6 m² at 3 mm thickness.
Packaging: Component A: Powder 25 kg bags.
Component B: Liquid 5 kg.
TECHNICAL DATA:
Consistency: fine powder.
Colour: cement grey.
Pot life: 20 to 30 minutes.
Setting time: 45 - 60 minutes.
Set to light foot traffic: after 1.5 - 2 hours.
Waiting time before installation: after at least
12 hours.
Application temperature range: from +5° C to
+35° C.
Storage: at least 12 months.
Application: trowel or spiked roller.
Consumption: 6 m² at 3 mm thickness.
Packaging: Component A: Powder 25 kg bags.
Component B: Liquid 5.5 kg.
TECHNICAL DATA:
Consistency: powder.
Colour: light beige.
Pot life: approx. 30 minutes.
Setting time: initial 60 minutes, final 80 minutes.
Set to light foot traffic: approx. 3 hours.
Waiting time before installation: at 3 mm 24 hours,
then 24 hours per each additional mm.
Application temperature range: from +5° C to
+35° C.
Mixing ratio: approx. 6 - 6.5 litres water per 25 kg
PLANITEX D10 or 24-26 parts water to 100 parts
powder.
EMICODE: EC1 - very low emission.
Storage: 6 months. Application: flat trowel.
Consumption: 1.5 kg/m² per mm of thickness.
Packaging: 25 kg bags.
25
Levelling Compounds
Nivorapid
Ultra-fast drying, thixotropic
cementitious levelling & repair
mortar for horizontal & vertical
surfaces. Interior levelling all types
of clean substrates not subject
to rising damp. Suitable for
levelling concrete slabs & walls,
masonry, renders&cementitious
screeds & existing natural stone
& terrazzo floors, leveling steps &
recommended when the substrate
must be put back to sevice in short
period. Mix with LATEX PLUS for
increased flexibility & bond strength.
EN 13813
Planipatch
TECHNICAL DATA:
Consistency: fine powder.
Colour: brown.
Pot life: 15 minutes.
Setting time: 15 - 25 minutes.
Set to light foot traffic: approx. 2 hours.
Waiting time before installation: 4 - 6 hours.
Application temperature range: from +5° C to
+30° C.
Mixing ratio: 21 - 23 parts in weight of water for 100
parts of NIVORAPID.
EMICODE: EC1 R Plus - very low emission.
Storage: 12 months.
Application: flat trowel.
Consumption: 1.6 kg/m² per mm of thickness.
Packaging: 25 kg bags.
TECHNICAL DATA:
Consistency: fine powder.
Colour: grey.
Pot life: approx. 10 minutes.
Setting time: approx. 25 minutes.
Set to light foot traffic: approx. 2 hours.
Waiting time before instalation: 4 - 6 hours.
Application temperature range: from +5° C to
+30° C.
Mixing ratio: 25 - 27 parts in weight of water for 100
parts of PLANIPATCH.
EMICODE: EC1 Plus - very low emission.
Storage: 12 months.
Application: flat trowel.
Consumption: approx. 6 m² at 3 mm thickness.
Packaging: 25 kg bags.
Smooth, ultra-fast setting,
thiotropic finishing feathedge
mortar for horizontal and vertical
surfaces. Suitable for use from
0 - 10 mm. When mixed with
LATEX PLUS will bond to metal,
rubber, PVC, linoleum and
wooden foors.
EN 13813
Latex Plus
Latex admixture for use with
NIVORAPID and PLANIPATCH
which, when mixed, provides
fast-setting levelling/smoothing
compounds with high flexibility
for interior surfaces.
26
TECHNICAL DATA:
Consistency: liquid.
Colour: white.
Flammability: no.
Pot life: 20 minutes.
Setting time: 30 minutes.
Set to light foot traffic: after 2 hours.
Application temperature range: from +5° C to
+30° C.
Waiting time between bonding: 12 - 24 hours.
Mixing ratio: 8 - 8.5kg of LATEX PLUS per 25 kg bag
of NIVORAPID.
Application: flat trowel.
Consumption: 0.6 kg/m² per mm of thickness.
Packaging: 8 - 6 - 3 - 1.5 kg drums.
27
Levelling Compounds
Ultraplan
Ultra-fast hardening, self-levelling
and smoothing compound
for differences in thickness
of 1 - 10 mm per coat. For
the interior levelling of new or
existing substrates that are
dry and not subject to rising
damp, to receive all types of
floor overings where maximum
resitance to loads and traffic is
required, can be trowel or pump
applied. Suitable for underfloor
heating.
TECHNICAL DATA:
Consistency: fine powder.
Colour: grey.
Pot life: 20 - 30 minutes.
Setting time: 45 - 60 minutes.
Set to light foot traffic: 3 hours.
Waiting time before installation: 12 hours.
Mixing ratio: 24 - 26 parts water for 100 parts by
weight of ULTRAPLAN.
EMICODE: EC1 R Plus - very low emission.
Storage: 12 months.
Application: trowel or pump.
Consumption: approx. 5 m² at 3 mm thickness.
Packaging: 23 kg bags.
EN 13813
Ultraplan Eco
Ultra-fast hardening, self-levelling
and smoothing compound for
differences in thickness of 1 - 10
mm per coat. Very low VOC
content. For the interior levelling
of new or existing substrates that
are dry and not subject to rising
damp, to receive all types of
floor coverings where maximum
resistance to loads and traffic is
required, can be trowel or pump
applied. Suitable for underfloor
heating.
TECHNICAL DATA:
Consistency: fine powder.
Colour: grey.
Pot life: 20 - 30 minutes.
Setting time: 45 - 60 minutes.
Set to light foot traffic: 3 hours
Waiting time before installation: 12 hours.
Application temperature range: +5° C to +35° C.
Mixing ratio: 25 - 26 parts water for 100 parts by
weight of ULTRAPLAN ECO.
EMICODE: EC1 R Plus - very low emission.
Storage: 12 months.
Application: flat trowel or pump.
Consumption: approx. 5 m² at 3 mm thickness.
Packaging: 23 kg bags.
EN 13813
Ultraplan Maxi
TECHNICAL DATA:
Consistency: fine powder.
Colour: grey.
Pot life: 30 - 40 minutes.
Setting time: 50 - 70 minutes.
Set to light foot traffic: approx. 3 hours.
Waiting time before installation: 24 - 72 hours,
depending on thickness and temperature.
Application temperature range: from +5° C to +30° C.
Mixing ratio: 18 - 19 parts water for 100 parts by
weight of Ultraplan Maxi.
EMICODE: EC1 R Plus - very low emission.
Storage: 12 months.
Application: flat trowel or pump.
Consumption: approx. 5.5 m² at 3 mm thickness.
Packaging: 25 kg bags.
Ultra-fast hardening self-levelling
smoothing compound for
thicknesses from 3 to 30 mm and
with very low emission of volatile
organic compounds (VOC).
EN 13813
28
29
Levelling Compounds
Ultraplan
Renovation Screed
A fibre reinforced self levelling
compound designed for use
in refurbishment of floors in
commercial and domestic
applications. Used for interior
smoothing and levelling of
thicknesses from 3 to 30 mm on
new or existing concrete, screeds,
stone, terrazzo & ceramic tiles, old
& new timber floors, floor boards,
chipboard panels, plywood &
parquet. Suitable for wheelchair
traffic & underfloor heating.
CEMENTITIOUS
SCREEDS
C25-F5
2 -s1
Fiberplan
Ultra-fast hardening, selflevelling, fibre-reinforced
smoothing compound for
interior smoothing and levelling
of thicknesses from 3 - 10 mm
on existing and new wooden
and timber floors, wooden
boarding, chipboard panels
and plywood. Also suitable for
smoothing cement, terrazzo,
existing ceramic tiles and natural
stone substrates. Suitable for
wheelchair traffic and underfloor
heating.
30
TECHNICAL DATA:
Consistency: fine powder.
Colour: grey.
Open time: 30 - 40 minutes.
Setting time: 50 - 70 minutes.
Set to light foot traffic: 4 - 5 hours.
Waiting time before installation: 1 - 3 days
depending on thickness.
Application temperature range: from +5° C to +30° C.
Mixing ratio: 17 - 18% parts water per 100 parts by
weight of ULTRAPLAN RENOVATION SCREED.
Application: flat trowel.
Consumption: approx. 6 m² at 3 mm thickness.
Packaging: 25 kg.
TECHNICAL DATA:
Consistency: fine powder.
Colour: pinkish-grey.
Pot life: 20 - 30 minutes.
Setting time: 45 - 60 minutes.
Set to light foot traffic: 3 hours.
Waiting time before installation: 12 - 24 hours.
Application temperature range: from +5° C to
+30° C.
Mixing ratio: 24 - 26 parts water for 100 parts by
weight of FIBERPLAN.
Application: flat trowel.
Consumption: approx. 6 m² at 3 mm thickness.
Packaging: 25 kg bags.
EN 13813
31
Surface membranes
32
33
Surface membranes
Mapelay
Waterproof and anti-fracture PVC
glass fibre-reinforced canvas
for the interior installation of
resilient and textile flooring over
substrates that are cracked, dirty,
moist and subject to rising damp.
Mapeproof ESM
Two-component, solvent-free,
one or two coat pure epoxy
resin, used as a moisture barrier
on cement-based substrates
with residual or static moisture.
A low viscosity product with
high penetration capacity in
the porosity of the substrate.
Very low odour, ideal for use
in inhabited areas, hospitals,
schools etc.
34
TECHNICAL DATA:
Length: 25 m.
Width: 2 m.
Thickness: 1.2 mm.
Weight: 1.1 kg/m².
Packaging: 25 m rolls. Weight of roll approx. 57 kg.
TECHNICAL DATA:
Consistency: liquid.
Colour: transparent.
Flammability: no.
Application temperature range: from +10° C to
+30° C.
Set to light foot traffic: approx. 5 - 6 hours at 10° C.
Storage: 24 months.
Application: by brush or roller.
Consumption: 1 coat 6 kg = 20 m²,
2 coats 6 kg - 30 m², 1 kg 5 m² per coat.
Packaging: 6 kg (Component A: 4.5 kg,
Component B: 1.5 kg), 1 kg (Component A: 0.75 kg,
Component B: 0.25 kg).
35
Surface membranes
Mapeproof 1K
Turbo
Single component, solvent-free,
moisture curing polyurethane
surface membrane with
very low emission of volatile
organic compounds (VOC) for
waterproofing and consolidating
cementitious screeds, no mixing,
no waste.
Mapeproof
One Coat
A two-component, black, singlecoat epoxy surface damp proof
membrane for controlling residual
and constructional moisture
in cementitious substrates.
Mapeproof One Coat is ideal for
use on cementitious sub floors
with residual or constructional
moisture levels of above 75% rh
(BS8203) and below 97% rh prior
to the installation of resilient floor
coverings.
36
TECHNICAL DATA:
Consistency: liquid.
Colour: brown.
Flamability: no.
Maximum residual humidity permitted: 1-coat up to
92% RH - 2-coats 97%RH.
Application temperature range: from +5° C to +35° C.
Loss of tack: after 30 - 40 minutes.
Set to light foot traffic: 60 minutes.
Waiting time between each coat: min. 40 minutes max. 2 hours.
Waiting time before laying directly with adhesive:
min. 2 hours - max. 24 hours.
Min. waiting time before successive treatments on
final coat (blinded with sand): min. 2 hours.
EMICODE: EC1 R - very low emission.
Storage: 12 months. Application: by roller or brush.
Consumption: approx. 50 m² per 10 kg depending on
the porosity of the substrate.
Packaging: 10 kg drums.
TECHNICAL DATA:
Consistency: liquid.
Colour: black.
Maximum residual humidity permitted: 1 coat up to
97% RH.
Application temperature range: from +10° C to
+30° C.
Loss of tack at +23° C: after approx. 3 hours.
Set to light foot traffic at +23° C: after approximately
5 hours.
Storage: 12 months in original well sealed container
under normal conditions. Protect from frost.
Application: by roller or trowel.
Consumption: 16 m² per 7 kg unit.
37
XXXXXXXXXXXXXXXXX
RESILIENT &
TEXTILE ADHESIVES
38
39
RESILIENT & TEXTILE ADHESIVES
Adesilex G19
Two-component epoxy
polyurethane adhesive used
for bonding rubber, PVC, semiflexible vinyl sheet and tile, textile
and linoeum floor coverings
internally and externally on new
or existing substrates.
Adesilex G20
Low viscosity, two-component
epoxy polyurethane adhesive
for bonding thin rubber flooring,
semi-flexible homogeneous
and hetrogeneous PVC tile
and sheet, textile and linoeum
floor coverings internally and
externally substrates.
Adesilex VZ
Double coat solvented
polychloroprene impact adhesive
for the installation of floor and
wall coverings where instant
bonding is required. For the
installation of PVC on curved
surfaces, immediate bonding of
PVC floor and wall coverings,
bonding PVC to non-absorbent
surfaces, for PVC baked wood
or cork and linoeum and rubber
flooring.
40
TECHNICAL DATA:
Consistency: Component A: thick paste;
Component B: fluid liquid.
Colour: Component A: beige; Component B: straw
yellow.
Flammability: no.
Mixture ratio: Component A : Component B = 94 : 6.
Pot life: 50 - 60 minutes.
Application temperature range: from +10° C to +30° C.
Open time: 1 hour.
Setting time: 9 hours.
Set to light foot traffic: after 12 - 24 hours.
Ready for use: after 3 days at +23° C.
Storage: 24 months.
Application: notched trowel.
Consumption: 20 m² per 10 kg; 10 m² per 5 kg; 4 m²
per 2 kg.
Packaging: 10 - 5 and 2 kg drums.
TECHNICAL DATA:
Consistency: Component A: thick paste;
Component B: fluid liquid.
Colour: Component A: beige; Component B:
transparent.
Flammability: no.
Mixture ratio: Component A : Component B = 94 : 6.
Pot life: 40 - 50 minutes.
Application temperature range: from +10° C to
+30° C.
Open time: 1 hour.
Setting time: 10 hours.
Set to light foot traffic: after 12 - 24 hours.
Ready for use: after 3 days +23° C.
Storage: 24 months.
Application: notched trowel and roller.
Consumption: 30 m² per 10 kg; 15m² per 5 kg.
Packaging: 10 and 5 kg drums.
TECHNICAL DATA:
Consistency: viscose liquid.
Colour: beige
Flammability: yes.
Application temperature range: from +10° C to
+35° C.
Waiting time: 10 - 20 minutes.
Open time: 50 minutes.
Setting time: 10 hours.
Set to light foot traffic: immediately.
Ready for use: immediately.
Storage: 12 months.
Application: notched and flat trowel.
Consumption: 16 m² per 5 kg; 3 m² per 1 kg.
Packaging: 5 & 1 kg drums.
41
RESILIENT & TEXTILE ADHESIVES
Ultrabond Eco 170
A solvent-free, non-flammable
carpet adhesive dispersed in water,
with strong initial bond and long
open time. ULTRABOND ECO 170
does not contain toxic substances
and has an extremely low emission
level of VOC. Suitable for bonding
textile flor coverings with all types
of backings on to all kinds of
internal, absorbant and moisture
stable substrates normally used in
building. Particularly suitable for use
in environments subject to intense
traffic & wheelchair use and for use
over heated floors.
Ultrabond Eco 380
A solvent-free, non-flammable vinyl/
PVC adhesive, dispersed in water
with a strong initial bond & long open
time. ULTRABOND 380 does not
contain toxic substances and has a
low emission level of VOC. Use for
bonding PVC/vinyl, homogenous
& hetrogeneous sheet or tile, semiflexible vinyl tiles on to all kinds
of internal, absorbant & moisture
stable substrates normally used in
building. Particularly suitable for use in
environments subject to intense traffic
& wheelchair use & over heated floors.
Ultrabond Eco 520
A solvent-free, non-flammable
linoeum adhesive, dispersed in
water with a strong initial bond.
ULTRABOND ECO 520 does not
contain toxic substances and
has a low emission level of VOC.
Suitable for bonding natural juteback linoeumon to all kinds of
internal, absorbant and moisture
stable substrates normally used
in building. Particularly suitable
for use in environments subject
to intense traffic & wheelchair use
& over heated floors.
42
TECHNICAL DATA:
Consistency: creamy paste.
Colour: light beige.
Flammability: no.
Application temperature range: from +15° C to
+35° C.
Waiting time: from 0 - 20 mins.
Open time: 30 - 40 min.
Set to light foot traffic: after 3 hours.
Ready for use: after 24 hours.
EMICODE: EC1 Plus - very low emission.
Storage: 24 months. Protect from frost.
Application: notched trowel.
Consumption: approx. 55 m² per 15 kg.
Packaging: 12 kg drums.
TECHNICAL DATA:
Consistency: creamy paste.
Colour: light beige.
Flammability: no.
Application temperature range: from +15° C to
+35° C.
Waiting time: approx. 10 - 20 mins. (depending on the
absorbency of the substrate).
Open time: 70 mins.
Set to light foot traffic: after 3 - 4 hours.
Ready for use: after 48 hours.
EMICODE: EC1 Plus - very low emission.
Storage: 12 months. Protect from frost.
Application: notched trowel.
Consumption: approx. 55 m² per 15 kg; 18 m² per 5 kg.
Packaging: 15 - 5 kg drums.
TECHNICAL DATA:
Consistency: creamy paste.
Colour: light beige.
Flammability: no.
Application temperature range: from +15° C to
+35° C.
Waiting time: 30 - 40 mins, depending on the
conditions.
Open time: 0 - 20 mins, depending on the conditions.
Set to light foot traffic: after 3 hours.
Ready for use: after 24 hours.
EMICODE: EC1 Plus - very low emission.
Storage: 12 months. Protect from frost.
Application: notched trowel.
Consumption: approx. 55 m² per 15 kg.
Packaging: 15 kg.
43
RESILIENT & TEXTILE ADHESIVES
Ultrabond Eco Fix
Solvent-free, pressure sensitive,
multi purpose adhesive,
dispersed in water, with
permenant tack and very low
emissions of VOC. Used for
both permenant and release
bonding of a wide range of floor
coverings on internal absorbent
and moisture stable substrates
normally used in buildings.It is
suitable for use in environments
subject to heavy traffic and
wheelchair use and can be used
over heated floors.
Ultrabond Eco Tack
Solvent-free, carpet tile tackifier
dispersed in water, for the nonpermenant installation of carpet
tiles. Allows the reaplacement of
carpet tiles as and when required.
Low emissions of VOC.
Ultrabond Eco
VS90
Multi-purpose HT acrylic
adhesive, dispersed in water,
solvent-free with very low
emissions of VOC. For bonding
vinyl, rubber, PVC and carpet.
44
TECHNICAL DATA:
Consistency: creamy paste.
Colour: light beige.
Flammability: no.
Application temperature range: from +15° C to
+35° C.
Waiting time: installation should be carried out once
the adhesive has become transparent or immediately
for a permanent bond.
Set to light foot traffic: immediately after installation.
EMICODE: EC 1 - very low emission.
Storage: 24 months. Protect from frost.
Application: roller and notched trowel.
Consumption: 105 - 150 m² per 15 kg by roller; 75 105 m² per 15 kg by trowel.
Packaging: 15 kg drums.
TECHNICAL DATA:
Consistency: liquid.
Colour: light beige.
Flammability: no.
Application temperature range: from +15° C to
+35° C.
Waiting time: installation should be carried out once
the adhesive has become transparent.
Set to light foot traffic: immediately.
Ready for use: immediately.
Storage: 12 months. Protect from frost.
Application: roller.
Consumption: 180 - 200 m² per 15 kg.
Packaging: 15 kg.
TECHNICAL DATA:
Consistency: creamy paste.
Colour: light beige.
Flammability: no.
Application temperature range: from +10° C to
+35° C.
Waiting time: 10 - 20 minutes.
Open time: 30 - 40 minutes.
Set to light foot traffic: after 6 - 8 hours.
Ready for use: 72 hours.
EMICODE: EC1 - very low emisson.
Storage: 12 months. Protect from frost.
Application: notched trowel.
Consumption: 55 m² per 15 kg; 18 m² per 5 kg.
Packaging: 15 - 5 kg drums.
45
RESILIENT & TEXTILE ADHESIVES
Ultrabond Super
Grip
White, general purpose acrylic
adhesive in water dispersion
with high initial bonding strength,
used for bonding baseboards
and profiles in PVC, rubber,
wood, gypsum, polystyrene and
metal on all types of substrates
normally used in construction
(one of the substrates must be
absorbent).
46
TECHNICAL DATA:
Consistency: creamy paste.
Colour: white.
Inflammable: no.
Application temperature range: from +10° C to
+35° C.
Open time: 10 - 15 minutes.
Complete hardening time: 24 - 48 hours.
Storage: 24 months. Protect from frost.
Application: extruded from tube.
Consumption: 310 tubes: approx. 15 m for
each bead.
Packaging: 310 ml cartridges.
47
XXXXXXXXXXXXXXXXX
WOOD ADHESIVES
48
49
WOOD ADHESIVES
Ultrabond P913 2K
Two-component epoxypolyurethane adhesive for
medium-sized, solid wooden
floors and all types of
engineered wooden floors.
Ultrabond P902 2K
Two-component epoxypolyurethane adhesive for
bonding all sizes and types of
wooden flooring.
Suitable for heated screeds
Lignobond
Solvent and water free, twocomponent epoxy polyurethane
adhesive for installing wooden
floors.
Ideal for bonding all sizes and
types of wooden flooring on any
kind of substrate. Ideal for heated
screeds.
50
TECHNICAL DATA:
Consistency: paste.
Colour: comp. A: beige or brown; comp. B: beige.
Flammable: no.
Mixing ratio: comp. A : comp. B = 90 : 10.
Pot life of mix: 60 minutes.
Recommended application temperature range:
from +10°C to +30°C.
Open time: 60 minutes.
Set to light foot traffic: after 24 hours.
Sanding: after 3 days.
Storage: 24 months.
Application: notched trowel.
Consumption: 10 m² per 10 kg.
Packaging: 10 kg drums (A & B).
TECHNICAL DATA:
Consistency: paste.
Colour: Component A: beige or brown. Component
B: whitish.
Mixture ratio: Component A : Component B = 90 : 10.
Pot life: 60 - 70 minutes.
Application temperature range: from +10° C to
+30° C.
Open time: 60 minutes.
Set to light foot traffic: after 24 hours.
Polishing: after 3 days.
Storage: 24 months in original sealed packaging.
Consumption: 10 m² per 10 kg
Packaging: 10 kg drums (A & B)
TECHNICAL DATA:
Consistency: Component A: thick paste;
Component B: fluid paste.
Colour: Component A: dark brown or light brown;
Component B: brown.
Flammability: no.
Mixture ratio: Component A: Component B = 90 : 10.
Pot life: 60 minutes.
Application temperature range: from +10° C to
+30° C.
Open time: 60 minutes.
Setting time: 8 hours.
Set to light foot traffic: after 24 hours.
Polishing: after 3 days.
Storage: 24 months.
Application: notched trowel.
Consumption: approx. 10 m² per 10 kg.
Packaging: 10 kg drums.
51
WOOD ADHESIVES
Ultrabond P990 1K
Ready-to-use, solvent-free,
one-component, polyurethane
adhesive for the installation of all
sizes and types of T&G wooden
flooring. Extremely low emissions
of VOC.
Ultrabond Eco
S945 1K
One-component, isocyanate
and solvent-free, sililated
polymer adhesive with a very low
emission level of volatile organic
compounds (EMICODE EC1 R
Plus) for bonding engineered
boards and medium-sized solid
wood. Ideal for heated screeds.
Ultrabond Eco
S955 1K
One-component, solvent and
isocyanate-free sililated polymer
adhesive with a very low
emission level of volatile organic
compounds (EMICODE EC1 R
Plus) for all types of engineered
and solid wood flooring. Ideal for
heated screeds.
52
TECHNICAL DATA:
Consistency: creamy paste.
Colour: beige, brown.
Flammability: no.
Application temperature range: from +10° C to
+35° C.
Open time: 110 minutes.
Set to light foor traffic: after 12 hours.
Polishing: after 3 days.
EMICODE: EC1 R Plus - very low emission.
Storage: 12 months.
Application: notched trowel.
Consumption: 15 - 18 m² per 15 kg.
Packaging: 15 kg in aluminium bag contained
in plastic drum. Carton containing twenty 600 cc
aluminium soft cartridges.
TECHNICAL DATA:
Consistency: creamy paste.
Colour: beige.
Inflammable: no.
Application temperature range:
from +10°C to +35°C.
Open time: 45 - 60 minutes.
Set to foot traffic: 12 hours.
EMICODE classification: EC1 R Plus
- very low emission.
Storage: 12 months.
Application: notched trowel.
Consumption: 15 - 18 m² per 15 kg.
Packaging: 15 kg aluminium bags contained in
plastic drums.
TECHNICAL DATA:
Consistency: creamy paste.
Colour: beige or brown.
Inflammable: no.
Recommended application temperature range:
from +10° C to +35° C.
Open time: 50 - 60 minutes.
Set to light foot traffic: after 12 hours.
Sanding: after 3 days.
EMICODE: EC1 R Plus very low emission.
Storage: 12 months.
Application: notched trowel.
Consumption: approx. 15 - 18 m² per 15 kg.
Packaging: 15 kg aluminium bags contained in plastic
drums.
53
WOOD ADHESIVES
Ultrabond S965 1K
One-component, solvent and
isocyanate-free sililated polymer
adhesive with a very low
emission level of volatile organic
compounds (EMICODE EC1 R
Plus) for all types of external
decking. Special order only.
Ultrabond S997 1K
One-component, solvent-free,
ready-to-use, flexible, sililate
polymer-based thixotropic
adhesive with a very low
emission level of volatile organic
compounds (EMICODE EC1 R
Plus) for installing engineered
wooden floors with beads of
adhesive, wooden stairs and
wooden baseboards.
Adesilex PA
Adhesive based on synthetic
resins in alcohol for bonding
wooden flooring. Can be used for
the bonding of wood and mosaic
wooden flooring, all types of
wooden strips and blocks, and
small sized, engineered wooden
flooring.
54
TECHNICAL DATA:
Consistency: creamy paste.
Colour: beige.
Inflammable: no.
Application temperature range:
from +10°C to +35°C.
Open time: 90 - 100 minutes.
Set to foot traffic: 12 hours.
Sanding: after 3 days.
EMICODE classification: EC1 R Plus - very low
emission.
Storage: 12 months.
Application: notched trowel.
Consumption: 15 - 18 m² per 15 kg.
Packaging: 15 kg aluminium bags contained in plastic
drums.
TECHNICAL DATA:
Consistency: thixotropic paste.
Colour: ochre yellow.
Application temperature range:
from +10°C to +35°C.
Open time (formation of skin): 40 ± 10 minutes.
Set to foot traffic (approx.): 12 hours.
EMICODE classification: EC1 R Plus - very low
emission.
Storage: 18 months in original well-sealed packaging.
Application: special extrusion gun.
Consumption: 4 - 6m² per 600 cc when applied in
linear beads.
Packaging: 600 cc sausage.
TECHNICAL DATA:
Consistency: creamy paste.
Colour: beige.
Flammable: yes.
Application temperature range:
from +10°C to +30°C.
Open time: approx. 5 - 10 minutes.
Set to light foot traffic: after 24 - 72 hours.
Polishing: at least 72 hours.
Storage: 24 months.
Application: notched trowel.
Consumption: 15 - 19 m² per 16 kg.
Packaging: 16 kg drums.
55
INSTALLATION SYSTEM FOR INSTALLING
VINYL SHEET ON UNEVEN SUBSTRATES
For Concrete or sand/cement screed with an
effective structural damp proof membrane,
relative humidity below 75%, with varying
levels of up to 20 mm.
1.
Mapei Eco Prim T (diluted up to 1 - 2 dependent on the
porosity of the sub floor)
2.2nd coat of Eco Prim T (Undiluted)
3.30mm maximum thickness Mapei Ultraplan Renovation
Screed
4.Secure the vinyl sheet with Mapei Ultrabond Eco 380
vinyl sheet
adhesive
Ultrabond Eco 380
levelling compound
Ultraplan Renovation Screed
primer
Eco Prim T
concrete screed
56
57
INSTALLATION SYSTEM FOR INSTALLING
RUBBER FLOORING ON SUBSTRATES
WITH HIGH RESIDUAL MOISTURE
For Concrete or sand/cement screeds
with an effective structural damp proof
membrane relative humidity above 92%
and below 97%.
1.After removing all contamination by mechanical means apply
Mapeproof ESM at a coverage rate of 30 m2 per 6 kg unit
2.Apply a 2nd coat at right angles to the 1st to ensure no pin-holing
is in evidence and allow to dry
3.Apply Mapei Eco Prim Grip
4. Apply Latexplan Trade 3 - 10 mm thickness
5.Secure the rubber flooring with Mapei Ultrabond Eco VS90
rubber flooring
adhesive
Ultrabond Eco VS90
levelling compound
Latexplan Trade
primer
Eco Prim Grip
surface membrane (2 coats)
Mapeproof ESM
concrete
58
59
INSTALLATION SYSTEM FOR INSTALLING
ENGINEERED WOOD ON TO A SAND:CEMENT
SCREED OR CONCRETE SUB-FLOOR
For Concrete or sand/cement screed
with an effective structural damp proof
membrane, relative humidity below 75%.
5.4 days after installing Mapei Topcem Pronto (fully commission
the underfloor heating system as per BS8203/4)
6.Turn off the underfloor heating at least 48 hours prior to the
installation
7.Solid bond Mapesonic CR with Mapei Ultrabond S955 1K
1.Mechanically prepare the concrete/sand-cement screed to remove
all contamination
8.Secure the engineered boards with Mapei Ultrabond S955 1K
2.Install a suitable gauge polythene or Visqueen membrane
10.Infill perimeter joints and thresholds with Mapei Silwood
3.Install the underfloor heating system
11.48 hours after completion of the installation re-commission the
underfloor heating as per BS8203/4
4.Install Mapei Topcem Pronto (to a minimum of 55 mm thickness)
9.Secure the skirting detail with Mapei Ultrabond S997 1K
sealant
Silwood
skirting adhesive
Ultrabond S997 1K
soundproofing mat
Mapesonic CR (2mm)
adhesive
Ultrabond Eco S955 1K
screed
Topcem Pronto
CEMENTITIOUS
SCREEDS
C30-F6
A1fl
EN 13813
IN COMPLIANCE WITH EUROPEAN STANDARDS
EN13813
heating system
damp proof membrane
base
60
61
SUBFLOOR PRODUCT SELECTOR
Application methods
Latexplan
Trade
Latexplan
2 Part Protein Free
Trade Self Levelling
compound
2 Part Protein
Free Self Levelling
compound
Ultraplan
Power Floated Concrete (shot blasted)
Calcium Sulphate e.g Anhydrite Screeds
Minimal Adhesive Residues
Surface DPM
Flooring Grade Mastic Asphalt
Steel
(non-flexing, corrosive free and clean)
Plywood Overlays Secured to BS
Ultraplan
Renovation
Screed
Fiberplan
Nivorapid
Fibre enhanced
levelling
compound
Fast setting repair
mortar for vertical/
horizontal surfaces
Flat Trowel
Flat Trowel
30-40 mins
3-30mm
24-72 hours
3 hours
5.5m2
Yes
Fibrous Levelling
compound for all
types of sub floors
Trowel, Pump or
Spiked Roller
30-40 mins
3-30mm
24-72 hours
4-5 hours
6m2
Yes
20-30 mins
3-10mm
12-24 hours
3 hours
6m2
Yes
15 mins
1-20mm
4-6 hours
2 hours
6m2
n/a
Water mixed self
levelling
compound
Trowel, Pump or
Spiked Roller
20-30 mins
1-10mm
12 hours
3 hours
5.0m2
Yes
Water mixed self
levelling
compound
20-30 mins
1-10mm
12 hours
1.5-2 hours
6m2
Yes
20-30 mins
1-10mm
12 hours
1.5-2 hours
6m2
Yes
30N/mm2
30N/mm2
26N/mm2
30N/mm2
35N/mm2
28N/mm2
28N/mm2
40N/mm2
8N/mm2
10N/mm2
7N/mm2
8N/mm2
8N/mm2
5.5N/mm2
8N/mm2
10N/mm2
CT C25-F7 A2
CT C30-F7 A2
CT C35-F7 A2
CT C25 F5 A2
CT C25-F7 A2
CT C40-F10 A2
Eco Prim T
Mapeprim SP
Eco Prim Grip
Mapeprim SP
Eco Prim T
Mapeprim SP
** Eco Prim Grip
Primer G
n/a
Eco Prim T
Mapeprim SP
Eco Prim Grip
Mapeprim SP
Eco Prim T
Mapeprim SP
* Eco Prim T
Primer G
n/a
Eco Prim T
Mapeprim SP
Eco Prim Grip
Mapeprim SP
Eco Prim T
Mapeprim SP
* Eco Prim T
Primer G
n/a
Eco Prim T
Mapeprim SP
Eco Prim Grip
Mapeprim SP
Eco Prim T
Mapeprim SP
* Eco Prim T
Primer G
n/a
Eco Prim T
Mapeprim SP
Eco Prim Grip
Mapeprim SP
Eco Prim T
Mapeprim SP
* Eco Prim T
Primer G
n/a
Eco Prim T
Mapeprim SP
Eco Prim Grip
Mapeprim SP
Eco Prim T
Mapeprim SP
* Eco Prim T
Primer G
Yes **
Eco Prim Grip
Mapeprim SP
Eco Prim Grip,
Eco Prim T
* Eco Prim T
Primer G
Yes + Latex Plus
Prime with Eco Prim
Grip,
Mapeprim SP or Eco
Prim T
Eco Prim Grip
Mapeprim SP
Eco Prim T
Eco Prim Grip
Mapeprim SP
Eco Prim T
Eco Prim Grip
Mapeprim SP
Eco Prim T
Eco Prim Grip
Mapeprim SP
Eco Prim T
Eco Prim Grip
Mapeprim SP
Eco Prim T
Eco Prim Grip
Mapeprim SP
Eco Prim T
* Mapeprim SP
Eco Prim Grip
* Mapeprim SP
Eco Prim Grip
* Mapeprim SP
Eco Prim Grip
* Mapeprim SP
Eco Prim Grip
* Mapeprim SP
Eco Prim Grip
* Mapeprim SP
Eco Prim Grip
* Mapeprim SP
Eco Prim Grip
* Mapeprim SP
Eco Prim Grip
* Mapeprim SP
Eco Prim Grip
* Mapeprim SP
Eco Prim Grip
* Mapeprim SP
Eco Prim Grip
* Mapeprim SP
Eco Prim Grip
n/a
n/a
n/a
n/a
Eco Prim Grip
Eco Prim Grip
* Mapeprim SP
Eco Prim Grip
* Mapeprim SP or
Eco Prim Grip
Mix with Latex Plus
or prime with Eco
Prim Grip
SUBFLOOR SUITABILTY + PRIMER RECOMMENDATION
Concrete, Sand:Cement screeds and
other Solid Absorbent Surfaces
Non-absorbent surfaces e.g Terrazzo,
Ceramic Tiles
Ultraplan
Maxi
Water mixed self
levelling
compound
Trowel, Pump or
Spiked Roller
20-30 mins
1-10mm
12 hours
3 hours
5.0m2
Yes
Trowel/Spiked Roller Trowel/Spiked Roller
Working Time (at +5-30 °C)
Min-Max thickness
Apply floorcovering in...
Time to Foot Traffic
Coverage at 3mm per unit
Suitable for under floor heating?
Compressive Strength
28 Day to BS EN 13892-2 (N/mm2)
Flexural Strength
28 Day to BS EN 13892-2 (N/mm2)
Screed material and Floor screeds
BS EN 13813
Ultraplan
Eco
Eco Prim T
Mapeprim SP
Eco Prim Grip
Mapeprim SP
Eco Prim T
Mapeprim SP
* Eco Prim T
Primer G
Yes **
Apply directly to
Mapeproof ESM or
One Coat before
18 hours. After 18
hours prime with
either Eco Prim
Grip/Mapeprim SP/
Eco Prim T
* Mapeprim SP
Eco Prim Grip
* Mapeprim SP
Eco Prim Grip
Eco Prim Grip
Trowel or Pump
SUBFLOOR SUITABILTY + PRIMER RECOMMENDATION
** Dependent on removal of at least 75% of residues
PRIMERS
Yes
*Use Primers for Absorbent Surfaces and non absorbent surfaces
SURFACE MEMBRANES
Eco Prim T
• Multi purpose - porous & non porous
• Improves levelling compounds bond
• Apply by brush or roller
• Can be diluted on highly porous sub floors
• EC1 - low VOC
Mapeproof ESM
• 2 part Epoxy Surface Membrane
• Vapour barrier for cement based substrates with residual or static moisture up
to 97% RH
• L ow odour, solvent free - ideal for use in hospitals, schools and offices
• U se on underfloor heating (2-coat system)
Mapeprim SP
• Solvent Free
• Use on substrates not subject to rising damp
• Improves levelling compounds bond
• Use on gypsum/anhydrite screed, ceramic tiles and natural stone
• Use on non-absorbant surfaces
Mapeproof 1K
Turbo
ECO Prim Grip
•Multi-purpose
•Pre-aggregated primer to use on non-absorbant surfaces
•Provides an exceptional key and high grip surface
•Extremely low emissions of VOC
Polyurethane Surface Membrane
• U se from the tin, no waste, no mixing
• Waterproofs cementitious screeds not subject to rising damp, residual humidity
up to 97% RH
•M
oisture curing and rapid drying
• E C1 - low VOC
Mapeproof
One Coat
• 2 part Epoxy Surface Membrane
•O
ne coat up to 97% RH
• C an be applied to prepared power floated concrete and sand/cement screeds.
• C an be applied over underfloor heating systems, except wooden
floor installations.
• Trowel or roller applied.
63
62
FLOORING ADHESIVES SELECTOR
Ultrabond Eco Ultrabond Eco
170
380
Ultrabond Eco
VS90
Ultrabond
Eco Fix
Ultrabond
Eco Tack
Ultrabond
Eco 520
Yes
15kg
Adesilex
VZ
Adesilex
G19
5kg, 1kg
10kg, 5kg, 2kg
Solvent-Free
Packaging Size
Yes
15kg
Yes
15kg + 5kg
Yes
15kg + 5kg
Yes
15kg
Yes
15kg
Coverage per unit (approximate)
55m
55m2 per 15kg,
18m2 per 5kg
55m2 per 15kg,
18m2 per 5kg
Trowel 75-105m2
Roller 105-150m2
190-220m
55m
16m2 per 5kg,
3m2 per 1kg
12 months
30-40 mins
3 hours
12 months
70 mins
3-4 hours
12 months
30-40 mins
6-8 hours
24 months
30 mins - 3 hours*
Immediate
12 months
2-12 hours**
Immediate
12 months
30-40 mins
3 hours
12 months
50 mins
Immediate
2
Storage
Open Time
Set to Foot Traffic
Permanent Bond
Unbacked
20m2 per 10kg,
10m2 per 5kg,
4m2 per 2kg
24 months
60 mins
12-24 hours
10kg, 5kg
30m2 per 10kg,
15m2 per 5kg
24 months
60 mins
12-24 hours
SUBFLOOR SUITABILTY + PRIMER RECOMMENDATION
Permanent Bond
PVC
2
Permanent Bond
Permanent Bond
or Release
Permanent Bond
Releasing Bond
Permanent Bond
Permanent Bond
Releasing Bond
Permanent Bond
Permanent Bond
Releasing Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
or Release
Action-Bac
Permanent Bond
Permanent Bond
Felt
Fibre Bonded/Needlepunch
Gel - compressed
Gel - foam
High Density Foam
Jute/Cotton
Jute/Hessian
Latex
Polyester
Polypropylene
PVC
Secondary Backed
Unitary
Cushioned
Coving/Skirting
PVC Sheet
PVC Tile
Vinyl/Composite Tile
Polyolefin
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent or Release
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent or Release
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent or Release
Permanent Bond
Permanent Bond
Permanent Bond
Permanent or Release
Permanent Bond
Permanent Bond
Permanent Bond
Permanent or Release
Permanent Bond
Permanent Bond
Permanent Bond
Permanent or Release
Permanent Bond
Permanent Bond
Permanent Bond
Permanent or Release
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Releasing Bond
Permanent Bond
Permanent Bond
Releasing Bond
Permanent Bond
Permanent Bond
Releasing Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Smooth Backed
Permanent Bond
Stud Flat Backed
Permanent Bond
Permanent Bond
Permanent Bond
Linoleum
Permanent Bond
Jute/Hessian Backed
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Polyester Backed
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Cork
Rubber
Floor
Coverings
Vinyl/PVC Floor
Coverings
Carpet
Carpet
Tiles
SUBFLOOR SUITABILTY + PRIMER RECOMMENDATION
Bitumen
2
Adesilex
G20
Natural Back
PVC-backed Cork
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
Permanent Bond
* Install flooring when the adhesive becomes transparent, between 30 mins to 3 hours depending on the amount of
adhesive, type of substrate and temperature conditions.
** Install flooring when the adhesive becomes transparent, between 2-12 hours depending on the surrounding
conditions and absorption of the adhesive
Product Capabilities
Profiles and skirting
Size
Coverage
(approx.)
Storage
Wood
Ultrabond Super Grip
310ml
15m per
bead
24 months
P
Mapeflex PU45
300ml
3m per
300mm
12 months
P
EC1
64
Metal
P
Dressing
PVC
Decorative
panels
Gypsum
Polystyrene
Gripper:
Stair
Nostings
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
Chipboard
Plasterboard
PVC
Cork
Wood
65
07/2013 MK03161UK
Astwood Design Consultancy www.astwood.co.uk
MAPEI UK LTD
Mapei House, Steel Park Road
Halesowen, West Midlands. B62 8HD
T: 0121 508 6970
F: 0121 508 6960
E: [email protected]
W: www.mapei.co.uk
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement